About Omneon MediaGrid - Harmonic Inc

System Configuration
2. Remove any “CB” entries that provide access to individual users from the /etc/gateway.conf and
etc/password files.
a. Open /etc/gateway.conf and delete entries for individual users beginning with “CB.”
b. Open etc/password and delete entries for the same individual users (the entries do not contain
“CB” in this file).
3. Restart the gateway service. For example, for a ContentBridge 2010B/2010C with hostname
hbcb205:
[root@hbcb205 ~]# service gateway restart
4. Add an entry for the LDAP server to /etc/hosts on the ContentBridge 2010B/2010C. For example:
10.4.224.100 OmneonServer omneonserver.opendir.local
Verify Communication with the Domain Controller
Follow the steps described in Verifying Communication with the Domain Controller.
NOTE: Make sure the MediaGrid cluster is also configured with LDAP.
NOTE: In order to access the MediaGrid, the individual users must be added to the LDAP domain.
Joining a ContentBridge 1000B to an LDAP Domain
Follow the procedures in this section in order.
NOTE: In order to join a ContentBridge 1000B to an LDAP domain, an LDAP or Open Directory server must
already be configured to serve as Samba Primary Domain Controller for the LDAP or Open Directory domain.
NOTE: It is not recommended that you switch between ActiveDirectory and LDAP once an authentication
method is chosen. Before continuing, make sure the ContentBridge is not configured for ActiveDirectory.
Create a ContentBridge Account on the LDAP Server
Follow the steps in Create a ContentBridge Account on the LDAP Server in the previous section.
NOTE: This procedure is required for joining a ContentBridge 1000B to an LDAP domain.
Configure Samba Settings for the ContentBridge
To configure Samba settings:
1. Log on to the first ContentDirector in your system using the following user name and password:
User name: ovnuser
Password: OVN@SvCaUsa
2. Remove samba private files stored on the ContentDirector with the following command:
sudo rm -f /tftpboot/config/gateway/secrets/*
3. Generate the file, /tftpboot/config/gateway/smb.conf, as shown in Figure 41.
118 Installation and Configuration Guide