About Omneon MediaGrid - Harmonic Inc

A list of users in the domain displays after a few seconds, for example:
[ovnuser@cld-1 ~]$ sudo wbinfo -u | less
SNV-ENG\eng-sysadmin
SNV-ENG\guest
SNV-ENG\support_388945a0
SNV-ENG\snv-eng-dc1$
SNV-ENG\krbtgt
SNV-ENG\admin
SNV-ENG\snv-eng-dc2$
SNV-ENG\qa1
SNV-ENG\qa2
SNV-ENG\qa3
SNV-ENG\qa4
System Configuration
2. Once this is verified, restart the omcld service so it can pick up the new domain configuration by
typing the following:
sudo service omcld restart
Configuring for Windows Domain or Active Directory Windows
Server 2000 Authentication
Before You Begin
In addition to the following, refer to Required Information for a Windows Domain Controller for
a complete list of expected customer-provided information to join Omneon MediaGrid to a Windows
domain.
You will need the following before beginning:
• Administrator privileges to complete the following steps. Contact the system administrator for
site-specific information, including user names, domain names and passwords.
• The “Windows NT domain name” from the facility’s network domain administrator.
• The name of the Windows domain controller. Use it below in place of “domain controller name”.
The site-specific entries in the following procedures are shown in bold-italic text. The following steps
must be performed on each ContentDirector.
Connecting to the ContentDirector
Use an SSH client, such as PuTTY, to connect to each ContentDirector.
To connect to the ContentDirector:
1. Start the PuTTY program.
2. In the Host Name box, enter the host name of the ContentDirector.
Omneon, Now Part of Harmonic 99