About Omneon MediaGrid - Harmonic Inc

System Configuration
Perform the following steps on each ContentDirector.
To set Omneon MediaGrid system time:
1. Log on to the ContentDirector using the following credentials:
• User name: ovnuser
• Password: OVN@SvCaUsa
2. Enter the following at the command prompt:
ntpdate -u IP_ADDRESS
where IP_ADDRESS is the IP address of a valid NTP server (preferably the SystemManager).
Creating a Volume and a Group File System
NOTE: If you already created a volume and a group file system as part of the configuration assistant, you
can continue to Joining an Omneon MediaGrid Cluster to a Windows Domain.
Once the system is installed and configured, create a Volume and then organize the ContentServers
into Groups. Use the SystemManager application to create the Volume and Groups. See “Creating or
Deleting Volumes” and “Creating or Deleting Groups” in the Omneon SystemManager User Guide for
instructions on organizing the ContentServers.
Creating a RAID Set
NOTE: This is only necessary for systems with the ContentServer 3000 series. If you already created a a
RAID set as part of the configuration assistant, you can continue to Joining an Omneon MediaGrid Cluster
to a Windows Domain.
Use the SystemManager application to create the RAID set. See “MediaGrid RAID Configuration and
Maintenance” in the Omneon SystemManager User Guide for instructions on creating a RAID set.
94 Installation and Configuration Guide