About Omneon MediaGrid - Harmonic Inc

System Configuration
The processes have started if you see the following:
mdsstartup (pid 22950) is running...
oujfh is stopped
ousd is stopped
ssmd is stopped
mdscore is stopped
trapmond (pid 22947) is running...
4. Note that “pid” is a process ID number, which will vary. A few seconds after cluster initialization, the
other processes (oujf, ouse, ssmd, mdscore) will start.
5. If the message displayed in the prior step is “mdsstartup is stopped”, type the command below to start
the ContentDirector service:
sudo service omcld start
If you did not initialize clusters as part of the configuration assistant, continue to the following
section. If you already initialized clusters as part of the configuration assistant, continue to Setting the
Omneon MediaGrid System Time.
Initializing Clusters
NOTE: If you already initialized clusters as part of the configuration assistant, continue to Setting the
Omneon MediaGrid System Time.
Complete this procedure for all ContentDirectors.
IMPORTANT: The following steps must be repeated when replacing a ContentDirector.
Initializing Clusters
Once the ContentDirector software is running for the first time, it must be initialized to a cluster. All
ContentDirectors in one cluster must have the same Cluster ID. For more information about clusters,
see About Clusters, Volumes and Groups with the ContentServer 3000 or About Setting up
Groups of ContentServers 1000 or 2000 Series, depending on your system.
Perform the following steps on each ContentDirector.
To initialize the cluster(s):
1. Make sure you are logged on to the ContentDirector with the following credentials:
• User name: ovnuser
• Password: OVN@SvCaUsa
2. Type the following at the command prompt:
cd /home/ovnuser/scripts
3. Start the initialization script with the following command:
sudo ./initialize
92 Installation and Configuration Guide