About Omneon MediaGrid - Harmonic Inc
About Omneon MediaGrid - Harmonic Inc About Omneon MediaGrid - Harmonic Inc
System Installation with ContentServer 1000 and 2000 Series 10GbE Switch First Switch Second Switch Connecting Network Switches to the Client Network: Two-rack System This section provides instructions for interconnecting a two-rack Omneon MediaGrid system. Refer to the following figure when connecting the systems. Rack One To Client Network To Client Network 10GbE Switch Figure 37. Network Switches and Client Network Connections Connecting Components in Rack One To connect the network switches to the client network: 1. Connect CX4 cables to the two 10GbE ports on the back of rack one’s first switch. Connect the other end of the cables to available 10GbE ports on rack two’s switch that connects to the client network. 2. Connect CX4 cables to the two 10GbE ports on the back of rack one’s second switch. Connect the other end of the cables to available 10GbE ports on rack one’s switch that connects to the client network. 3. Connect the top network switch to the client network. Connecting Components in Rack Two To connect the network switches to the client network: 1. Connect CX4 cables to the two 10GbE ports on the back of rack two’s first switch. Connect the other end of the cables to available 10GbE ports on rack two’s switch that connects to the client network. 2. Connect CX4 cables to the two 10GbE ports on the back of rack two’s second switch. Connect the other end of the cables to available 10GbE ports on the back of rack one’s switch that connects to the client network. 3. Connect the top network switch to the client network. Rack Two First Switch Second Switch 76 Installation and Configuration Guide
System Installation with ContentServer 1000 and 2000 Series Connecting an Omneon MediaGrid System with a 5406 Network Switch (CX4 or MMF) This section provides instructions for connecting an Omneon MediaGrid system using the integrated 5406 network switch. This version of the switch accommodates connections from all of the Omneon MediaGrid devices as well as connections to the client network. Refer to Figure 38 when connecting the system. Not all connections are shown. Connections to the client network are shown using CX4 cables. Multi-mode fiber optic cables are also supported with the appropriate module. See the instructions following the illustration for each device’s specific port connections. 5406 Switch To Client Network 0 1 0 1 1 0 2 3 Figure 38. Omneon MediaGrid and 5406 Network Switch (CX4 or MMF) Connections Omneon, Now Part of Harmonic 77 i 1 2 First ContentDirector First ContentServer l 0 SystemManager ContentBridge (Optional) l 0
- Page 49 and 50: System Installation with ContentSer
- Page 51 and 52: System Installation with ContentSer
- Page 53 and 54: System Installation with ContentSer
- Page 55 and 56: System Installation with ContentSer
- Page 57 and 58: Figure 10. ContentServer 3000 and 1
- Page 59 and 60: System Installation with ContentSer
- Page 61 and 62: System Installation with ContentSer
- Page 63 and 64: 10GbE Switch First Switch Second Sw
- Page 65 and 66: Module A To Client Network 10-GbE S
- Page 67 and 68: Connecting the ContentBridge System
- Page 69 and 70: Connecting the ContentDirectors Sys
- Page 71 and 72: Configuring a Stretch Cluster Syste
- Page 73 and 74: 10 GbE Module 1 GbE Module Public V
- Page 75 and 76: System Installation with ContentSer
- Page 77 and 78: CHAPTER 2 System Installation with
- Page 79 and 80: ContentBridge (optional) SystemMana
- Page 81 and 82: • The VLAN name and ID for the su
- Page 83 and 84: The following software installation
- Page 85 and 86: Before You Begin System Installatio
- Page 87 and 88: To rack mount an Omneon MediaGrid:
- Page 89 and 90: Figure 26. Rack Mounting the Conten
- Page 91 and 92: Installing the ContentServer Disk D
- Page 93 and 94: System Installation with ContentSer
- Page 95 and 96: 2 1 2 1 ID ID Figure 32. ContentSer
- Page 97 and 98: System Installation with ContentSer
- Page 99: System Installation with ContentSer
- Page 103 and 104: 2. Continue connecting any remainin
- Page 105 and 106: System Installation with ContentSer
- Page 107 and 108: CHAPTER 3 System Configuration This
- Page 109 and 110: Password: OVN@SvCaUsa 3. Enter the
- Page 111 and 112: System Configuration 4. If you are
- Page 113 and 114: 6. Apply power to the ContentServer
- Page 115 and 116: Notes on Active Directory Configura
- Page 117 and 118: Follow the prompts to initialize th
- Page 119 and 120: Joining an Omneon MediaGrid Cluster
- Page 121 and 122: 1. From your SSH terminal, edit /et
- Page 123 and 124: A list of users in the domain displ
- Page 125 and 126: System Configuration 1. After confi
- Page 127 and 128: 4. Type the following commands to r
- Page 129 and 130: The expected result is: Domain=[SNV
- Page 131 and 132: System Configuration This mount poi
- Page 133 and 134: System Configuration c. Replace wi
- Page 135 and 136: Modify the file as follows: System
- Page 137 and 138: Omneon MediaGrid name ContentDirect
- Page 139 and 140: Editing the LDAP Configuration File
- Page 141 and 142: System Configuration 4. Create a Sa
- Page 143 and 144: Modify the file as follows: System
- Page 145 and 146: Figure 43. Server Admin Open Direct
- Page 147 and 148: The following is a sample output fr
- Page 149 and 150: System Configuration a. Replace dom
System Installation with ContentServer 1000 and 2000 Series<br />
Connecting an <strong>Omneon</strong> <strong>MediaGrid</strong> System with a 5406 Network<br />
Switch (CX4 or MMF)<br />
This section provides instructions for connecting an <strong>Omneon</strong> <strong>MediaGrid</strong> system using the integrated<br />
5406 network switch. This version of the switch accommodates connections from all of the <strong>Omneon</strong><br />
<strong>MediaGrid</strong> devices as well as connections to the client network.<br />
Refer to Figure 38 when connecting the system. Not all connections are shown. Connections to the<br />
client network are shown using CX4 cables. Multi-mode fiber optic cables are also supported with the<br />
appropriate module. See the instructions following the illustration for each device’s specific port<br />
connections.<br />
5406 Switch<br />
To Client Network<br />
0<br />
1<br />
0 1<br />
1 0<br />
2 3<br />
Figure 38. <strong>Omneon</strong> <strong>MediaGrid</strong> and 5406 Network Switch (CX4 or MMF) Connections<br />
<strong>Omneon</strong>, Now Part of <strong>Harmonic</strong> 77<br />
i<br />
1<br />
2<br />
First ContentDirector<br />
First ContentServer<br />
l<br />
0<br />
SystemManager<br />
ContentBridge (Optional)<br />
l<br />
0