Technical Integration Guide - Afnic

More documents

Recommendations

Info

TECHNICAL INTEGRATION GUIDE – February 25th, 2013 50S:S:S: S: S: Command completed successfully; ack to dequeueS: S: S: 2009-01-03T00:00:00.0ZS: Trade in progress.S: S: S: S: S: S: S: ndd-de-test-0001.frS: holdersApprovedS: BEdemandeurIDS: 2009-01-01T00:00:00.0ZS: 2009-01-03T00:00:00.0ZS: BEactuelIDS: MM4567S: 2009-01-02T00:00:00.0ZS: S: S: S: S: S: S: une-reference-client-du-BEactuel-par-exempleS: frnic-00000014S: S: S:To end this operation, a message is sent to the registrar who initiated thetransmission only. In our case, "paResult" indicates 1 because everythingwent as planned.S:S:S: S: S: Command completed successfully; ack to dequeueS: S: S: 2009-01-03T00:00:00.0ZS: Trade completed.S: S: S: S: ndd-de-test-0001.frS: S: une-reference-client-par-exempleS: frnic-00000011S: S: 2009-01-03T00:00:00.0ZS: S: S: S: frnic-00000015S: S: S:Association Française pour le Nommage Internet en Coopération | www.afnic.fr | contact@afnic.frTwitter : @AFNIC | Facebook : afnic.frTechnical Integration Guide- 50 -November 2009
TECHNICAL INTEGRATION GUIDE – February 25th, 2013 513.4.6.3.Using the command for consultationJust like the command, the command in consultationdoes not give any information on the last trade made on the domain name.Only information on the ongoing transmissions are available to the registrarsinvolved in this operation.3.4.7. Recover – Forced domain name transmissionThe other transmission method, recover ("forced" transmission), where theoutgoing holder no longer exists, requires an authorization code. We aretherefore in a situation that mixes a creation "with an authorization code" and atrade (voluntary transmission).3.4.7.1.Requesting a recover (forced transmission)Just like a creation "with an authorization code", we will not detail in thisdocument how to retrieve the authorization code necessary for a recover.But it must be retrieved before any attempt to use this command on adomain name.The logic behind the command is similar to the and commands.For example, eventhough this is not useful in this interface version, we havechosen to keep the "op" attribute of the command. This attribute can onlyhave one value, "request", as, on the contrary to other commands fromwhich it is inspired, the command answers with a 1000 codeinstead of a 1001 code. Other than the command name, what differenciatethe request sent for a from the one sent for a is thepresence of the element used to indicate the authorizationcode. We would like to remind you that the authorization code is associatedto three elements (the registrar, the domain name and the holder nic-handle).The recover cannot be requested for an incoming holder in problem status.There is no limitation on the command from the identificationstatus of the outgoing holder.Association Française pour le Nommage Internet en Coopération | www.afnic.fr | contact@afnic.frTwitter : @AFNIC | Facebook : afnic.frTechnical Integration Guide- 51 -November 2009
Page 1 and 2: TECHNICAL INTEGRATION GUIDE - Febru
Page 49: TECHNICAL INTEGRATION GUIDE - Febru
Page 66: TECHNICAL INTEGRATION GUIDE - Febru
Page 101 and 102:
TECHNICAL INTEGRATION GUIDE - Febru
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
show all

Technical Integration Guide - Afnic

Create successful ePaper yourself

Delete template?

Save as template?