Positioning System HIWIN - Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Positioning SystemsLinear motor axisLaser trimmingOptimal results make a high demand on evenness and rectangularity ona large stroke. Themetal particles of the laser machining necessitate thebellow cover.Cross table with bellow coverStroke: 700 × 750 mmRepeatability: ± 2 µmFlatness: ± 0.01 / 300 mmRectangularity: ± 5 arcsecDispenserHighest requirements on the flatness.Stroke of cross table: 150 × 250 × 60 mmHigh Stiffness of the lower axes due the steel frameUpper axes stiffened by aluminium profileCreation of a Calibration chart to compensate the deviation of the flatnessLaser scripingHigh Accuracy due the use of glass scales.Customised LMC-linear motor systemLower axis is positions the part. Upper axis operates the LaserStroke: 400 × 110 mmRepeatability: ± 1µmRectangularity: 8 µmFlatness: ± 5 µmLaser ExposureExcelent results enabled due the very smooth motion of the coreless linearmotor axes.4 forcers on each axesOptimised adaptation of the profile of the existing frameIndustrial Technologies52