Positioning System HIWIN - Industrial Technologies

More documents

Recommendations

Info

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Positioning SystemsLinear motor axisWafer quality control at the highest levelHigh precision X-Y Stages with air-cushions are the prerequisitesfor surface monitoring, which even find the smallest errors, for example,in wafer production for the electronics and chip industries.Flatness ± 2 µmRepeatability ± 2 µmAccuracy ± 5 µmMicro-system Technology and Wafer ProcessingAbsolute precision and suitability for clean room conditions are the prerequisitesfor every drive in microsystem technology and wafer processing.Linear motor X-Y Stages are ideal for these tasks.Stroke 200 mm × 200 mm, optional 300 mm × 300 mmFlatness ± 4 µm across the complete strokeRepeatability ± 1 µm across both axesAccuracy ± 4 µm across both axesClean room suitability class 100, optional class 10Optionally suitable for vacuums up to 10 -3 mbarOverview for Laser ScannersHigh degree of synchronization and extended operating lives are a mustfor optical inspection systems such as laser scanners.Linear Motors with air bearings fulfill these requirements.No friction thanks to air bearingsNo cogging thanks to coreless linear motorsStroke up to 1,500 mmPhotovoltaic-panel assemblyHigh dynamic positioning of Silicium-cells for 24 hours each day.Linear motors also in vertical axes enable a long durabilityVertical axes with adjustable mass compensation and clamping element foremergeny-stop.Industrial Technologies50
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94X-ray-inspection of printed circuit boardsDelivery of the whole linear-motor-system consisting of Linear motor axis,drives, cables for an inline-inspection-machine.System with Coreless LMC-componentsHigh dynamic in spite of 100 kg mass to moveStroke: 550 × 550 mmRepeatability: ± 1µmAutomatic assemblyDynamic Assembly of circuit boards in fully automated assembly lines.Gantry system with LMS-components and KK-stage (Z-axis)Stroke: 650 × 660 × 135 mmAcceleration: 20 m/s²Flatness: ± 20 µmRectangularity: 0.01°Interferometrical survey of the axisDelivery ready assembled in the base frameMoveable SawLinear Motor Axis enables the cutting during the transport of bars.Customised LM-system with LMS47DCycle time approx. 1.3 s (mass: 55 kg, Stroke: 1.5 m)Speed: 3 m/sAcceleration: 22 m/s²Film transportCompact and flat linear motor axis with high power density integratedin the production line.Industrial TechnologiesTwo parallel LMC-axisStroke: 300 mmAll components assembled on a customisedbase frame 600 × 500 mm51
Page 1 and 2:
Индастриал Техноло
Page 3 and 4: Индастриал Техноло
Page 53: Индастриал Техноло
show all

Positioning System HIWIN - Industrial Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?