Positioning System HIWIN - Industrial Technologies

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Positioning SystemsLinear motor axis2.6 Model Numbers for Linear Motor Axis2.6.1 Model Numbers for Single Linear Motor AxisLinear motor axisAxis typeX: Horizontal axisV: Vertical axisH: PortalaxisLM X 1 L S23 1 0872 A 1 0 0 0 XXXNumber of axis1: single axisGuide railsL: Standard for iron-core motors (LMS)E: Standard for coreless motors (LMC)F: Flat design for coreless motors,max. length 1 mC: CustomisedMotor typeSxx: iron-core linear motorsCxx: coreless linear motorsT37x: iron-core linear motorin sandwich designNumber of forcers1) For LMH-axis distance measuring system “D” is obligatoryStroke [mm]Cover0: none (standard)A: Metal coverB: Bellow coverLimit switch0: none1: inductive, PNP (standard)2: optical, NPNPower feed size0: Standard for LMC-Axis1: Standard for LMS-Axis2: Standard for LMH-AxisC: CustomisedPower feed alignment0: none (standard)1: for horizontal alignment2: for vertical alignmentC: CustomisedDistance measuring system 1)A: optical, period 40 µm, analog 1V pp sin/cosB: optical, period 20 µm, analog 1V pp sin/cosC: HIWIN-MAGIC: magnetic, period 1 mm, 1 V pp sin/cosD: HIWIN-MAGIC-PG: magnetic, period 1 mm, 1 V pp sin/cos Magneticway integrated in the guide rails (standard)E: optical, absolute, enclosed, with ENDAT interfaceF: optical, incremental, 4 µm periods, glass scaleG: optical, digital TTL, resolution 1 µmAll encoders with individual reference signal at the start of the axisJob number of drawingSeveral forcers, Hall sensor,mass compensation,brake, special fixing holesIndustrial Technologies12