CMI RII User Manual

Update PositionTo enable this function the administrator has to set the CATIA V5 environmentCMI_ENABLE_CMIUPDATEPOSITIONCMD=ON.This function updates only the transformation matrices in Teamcenter. TheCATProduct and CATPart files are not updated.Update PartsTo get this function the administrator has to set the CATIA V5 environmentCMI_ENABLE_CMIUPDATEPARTCMD=ON.This function updates all modified CATPart files in Teamcenter. Transformations andCATProduct files are not updated.Restore PositionsTo enable this function the administrator has to set the CATIA V5 environmentCMI_RESTORE_POSITION=ON.This function restores the positions to their original state loaded from Teamcenter.Choose Update PositionTo get this function the administrator has to set the CATIA V5 environmentCMI_ENABLE_UPDATEPOSITIONDIALOG=ON.This function is available for normal Update and the Update Position command.Figure 89: Choose Matrix To Update dialogIf you have changed some positions in the CATIA session this function allows youto select the matrices to be updated. If you select a line in the dialog thecorresponding instance will be highlighted in the CATIA structure tree.• Yes Matrix will be updated in Teamcenter• No Matrix will stay unchanged in TeamcenterTo change the state you can double click a line or select the line and press theToggle update state button.60 CMI RII User Manual