CMI RII User Manual

When you have transferred a CATDrawing from Teamcenter to CATIA V5 via the CMI RIIapplication, the drawing will be displayed in CATIA V5 in a new window.CMI for CATIA V5 also supports CATIA V4 models and CATIA V5 Drawing files(CATDrawings). CATDrawings may be included in assembly structures in Teamcenter,however in CATIA V5 they will be displayed in separate windows as shown in the figurebelow.All normal CMI functions (Read, Update, Create, and Save As) may be used withCATDrawings and CATParts within CATIA V5.Figure 40: Drawing Workbench for Read, Update,Create or Save As CATDrawingCMI toolbar: Read From WorkbenchWith the ‘Read from Workbench’ button in the CMI Toolbar the content of the CMI RIIapplication in Teamcenter may be read into CATIA V5. The CMI RII application maycontain CATDrawings, and assembly structures.If you want to send one or more assemblies, CATParts or CATDrawings to CATIA V5follow these instructions:Drag and drop, Send drawings (CMI2DGeo datasets) or assemblies (items) into CMIRII.Expand or Deexpand the assemblies in the CMI RII application. Only those itemsthat are shown in the CMI RII application will be opened in CATIA.Read Teamcenter CATIA items with the Read From Workbench icon .Every top-level item in the CMI RII application will be opened in a separate browserin CATIA V5.If the Structure Manager application is the current active application in theTeamcenter Rich Client the Structure Manager content will be read to CATIA insteadof the content of the CMI RII application.CMI RII User Manual 27