Syntron® Electromagnetic Feeders - FMC Technologies
Syntron® Electromagnetic Feeders - FMC Technologies
Syntron® Electromagnetic Feeders - FMC Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Syntron ® <strong>Electromagnetic</strong> <strong>Feeders</strong> (cont’d.)<strong>Electromagnetic</strong> Feeder Specifications, cont’d.Model F-480Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)tph ◆ (460 V) Model Wt. (lb) Feeder/Control42 X 84 665 31.5 Amps CRSDC-2C 4100 420048 X 72 780 31.5 Amps or 4000 4100EVF-25DPlease request a certified drawing for installation.◆ Based on feeder with 10˚ down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding sand weighing 100 pounds per cubic foot.480/600 Volt 60 Hz single-phase. 400/415 Volt 50 Hz single-phase.Above-deck and base mounting drive units are available.A B C D E F G H J K L M N Pin 42 84 7 23 15 /16 107 15 /16 54 3 /8 33 30 11 /16 37 11 /16 17 7 /16 71 1 /2 19 50 3 /4 51mm 1067 2134 178 608 2742 1381 838 779 957 443 1816 483 1289 1295in 48 72 7 28 1 /16 100 1 /16 60 3 /8 33 27 13 /16 34 13 /16 17 1 /2 61 5 /8 21 56 3 /4 57mm 1219 1829 178 713 2542 1534 838 706 884 445 1565 533 1441 1448Model F-560Please request a certified drawing for installation.Trough Approx. Approx. Approx.W x L Capacity Current Control Net Ship Wt. (lb)tph ◆ (460 V) Model Wt. (lb) Feeder/ControlCRSDC-2C54 X 72 820 27 Amps or 8500 9000EVF-25D◆ Based on feeder with 10˚ down slope, below-deck drive unit,installed with proper hopper transition and skirt boardarrangement, feeding sand weighing 100 pounds per cubic foot.480/600 Volt 60 Hz single-phase. 400/415 Volt 50 Hz single-phase.Above-deck and base mounting drive units are available.A B C D E F G H J K L M N Pin 54 72 8 48 3 /8 120 3 /8 66 3 /4 51 1 /2 35 1 /2 43 1 /2 21 3 /8 80 19 63 63 1 /2mm 1372 1829 203 1229 3058 1695 1308 902 1105 543 2032 483 1600 1613Many other trough sizes are available. Capacities vary depending on drive unit location, material characteristics, material density,trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions. Cad drawings are available.Please call <strong>FMC</strong> <strong>Technologies</strong> for expert help with your application.10