General Index - National Roofing Contractors Association

More documents

Recommendations

Info

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksES PRODUCTS INC. ES PRODUCTS INC. ES PRODUCTS INC.NAIL-TITE TYPE R ES-90 BASE PLY FASTENER ES-60 BASE PLY FASTENERU.S. U.S. U.S.XXXX X XXXCARBON STEEL STEEL STEELZINC PLATED HOT DIPPED G-90 GALVANIZED HOT DIPPED G-90 GALVANIZEDTAPERED COE TWO-PIECE RECTANGULAR TWO-PIECE RECTANGULARROUND NA NACONICAL EXTENDING LEGS SHANK EXPANSION SHANK EXPANSIONNA 1 1/16 15/16 NA 1-7/10 NA NA NA 1-7/10 NA NAROUND ROUND ROUND0.015 -- --1.7 2.75 1.20NO NO NONA NO NONA NA NA NA NA NA ROUND 2-3/4 GAVALUMEMAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED)NA 90 MIN. 90 MIN.159 NA NANA NA NA-- --UL, FM, METRO-DADE COUNTY NA NAYES NA NAYESYES457
Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME ES PRODUCTS INC. ES PRODUCTS INC.2. PRODUCT NAME ES-45 BASE PLY FASTENER FM-90 BASE PLY FASTENER3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsumCementitious Wood Fiber5. USED WITH:Insulation AttachmentBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE STEEL STEEL7. COATING TYPE HOT DIPPED G-90 GALVANIZED HOT DIPPED G-90 GALVANIZED & URETHANE COATING8. SHANK TYPE TWO-PIECE RECTANGULAR TWO-PIECE RECTANGULAR9. POINT TYPE NA NA10. METHOD OF ATTACHMENT SHANK EXPANSION SHANK EXPANSION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)NA 1-1/15 NA NA NA 1-7/10 NA NA12. HEAD SHAPE ROUND ROUND13. HEAD DIMENSIONS (inches)Thickness -- --Diameter 1.20 2.7514. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) NO YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2-3/4 GALVANIZED STEEL16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other MAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 90 MIN. 90 MIN.Gypsum NA NACementitious Wood Fiber NA NA18. ACCEPTED BY THE FOLLOWING CODESLightweight Concrete -- FM, UL, METRO-DADE COUNTYGypsum NA FM, UL, METRO-DADE COUNTYCementitious Wood Fiber NA NA19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable458
Page 2 and 3:
2000LOW-SLOPEROOFINGMATERIALSGUIDET
Page 4 and 5:
Table of ContentsLow-Slope Roofing
Page 6 and 7:
Low-Slope Roofing Materials GuideIn
Page 8 and 9:
General IndexWOOD FIBERBOARD INSULA
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 27 and 28:
Information on Section 1: Roof Cove
Page 29 and 30:
3. Type (ASTM standard designation)
Page 31 and 32:
Warranty information for PIB single
Page 33 and 34:
11. ASTM E 331 water penetration12.
Page 35 and 36:
EPDMIndex to Roof CoveringsSPRAY PO
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
THIS PAGE LEFT BLANK INTENTIONALLY
Page 49 and 50:
Built-up RoofingBARRETT COMPANY, TH
Page 51 and 52:
Built-up RoofingCELOTEX CORP.7YESDI
Page 53 and 54:
Built-up RoofingAGS-H+ G/A-H+ AGS-H
Page 55 and 56:
Built-up RoofingM-N-B4 M-C-B3 M-N-B
Page 57 and 58:
Built-up Roofing1000-3 1000-4 1000-
Page 59 and 60:
Built-up RoofingHAI-335-MC HAW-325-
Page 61 and 62:
Built-up RoofingFIRESTONE BUILDING
Page 63 and 64:
Built-up RoofingI-B-3- NN-0- I-0-3-
Page 65 and 66:
Built-up RoofingHENRY COMPANY18YESD
Page 67 and 68:
Built-up RoofingJOHNS MANVILLE INTE
Page 69 and 70:
Built-up RoofingKOPPERS INDUSTRIES,
Page 71 and 72:
Built-up RoofingS3-XEX S3-BEX S4-BB
Page 73 and 74:
Built-up RoofingM4-FHB M4-FBB M4-FE
Page 75 and 76:
Built-up RoofingM2-CXD M2-DXD M2-EX
Page 77 and 78:
Built-up RoofingMFM BUILDING PRODUC
Page 79 and 80:
Built-up RoofingTAMKO ROOFINGTREMCO
Page 81 and 82:
Built-up RoofingTRI-PLY5YESDISTRIBU
Page 83 and 84:
Built-up RoofingBUR PLUS M.-PLY M.-
Page 85 and 86:
Modified Bitumen Part 1 - General I
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
APP Modified Bitumen Part 2: Test R
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
SBS Modified Bitumen Part 2: Test R
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Modified Bitumen Part 3: Modified B
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
PVC Part 1: General InformationGAF
Page 209 and 210:
PVC Part 1: General InformationIB R
Page 211 and 212:
PVC Part 1: General InformationSARN
Page 213 and 214:
PVC Part 2: Test ResultsTest descri
Page 215 and 216:
PVC Part 2: Test ResultsTest descri
Page 217 and 218:
THIS PAGE INTENTIONALLY LEFT BLANK
Page 219 and 220:
EPDM Part 1: General InformationCAR
Page 221 and 222:
EPDM Part 1: General InformationERS
Page 223 and 224:
EPDM Part 1: General InformationINT
Page 225 and 226:
EPDM Part 1: General InformationOLY
Page 227 and 228:
EPDM Part 1: General InformationROO
Page 229 and 230:
EPDM Part 2: Test ResultsTest descr
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
CSPE (Hypalon) Part 1: General Info
Page 237 and 238:
CSPE (Hypalon) Part 2: Test Results
Page 239 and 240:
PIB (Polyisobutylene ) Part 2: Test
Page 241 and 242:
TPO Part 1: General InformationGENF
Page 243 and 244:
TPO Part 2: Test ResultsTest descri
Page 245 and 246:
Other Prefabricated Sheet-Applied M
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Spray Polyurethane Foam-Based Syste
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Metal Roof Panels1. COMPANY NAME AE
Page 281 and 282:
Metal Roof Panels1. COMPANY NAME AE
Page 283 and 284:
Metal Roof Panels1. COMPANY NAME AM
Page 285 and 286:
Metal Roof Panels1. COMPANY NAME AR
Page 287 and 288:
Metal Roof Panels1. COMPANY NAME AT
Page 289 and 290:
Metal Roof Panels1. COMPANY NAME BE
Page 291 and 292:
Metal Roof Panels1. COMPANY NAME BE
Page 293 and 294:
Metal Roof Panels1. COMPANY NAME BU
Page 295 and 296:
Metal Roof Panels1. COMPANY NAME EN
Page 297 and 298:
Metal Roof Panels1. COMPANY NAME FA
Page 299 and 300:
Metal Roof Panels1. COMPANY NAME FO
Page 301 and 302:
Metal Roof Panels1. COMPANY NAME IN
Page 303 and 304:
Metal Roof Panels1. COMPANY NAME MB
Page 305 and 306:
Metal Roof Panels1. COMPANY NAME MB
Page 307 and 308:
Metal Roof Panels1. COMPANY NAME MC
Page 309 and 310:
Metal Roof Panels1. COMPANY NAME ME
Page 311 and 312:
Metal Roof Panels1. COMPANY NAME ME
Page 313 and 314:
Metal Roof Panels1. COMPANY NAME PE
Page 315 and 316:
Metal Roof Panels1. COMPANY NAME ST
Page 317 and 318:
Metal Roof Panels1. COMPANY NAME UN
Page 319 and 320:
BUTLER MANUFACTURING COMPANYMR-24 i
Page 321 and 322:
quality specifications and are avai
Page 323:
up to 20-ft. X 102-ft. (2,040 squar
Page 326 and 327:
Cellular GlassCellular glass insula
Page 328 and 329:
Index to Rigid Board InsulationCOMP
Page 330 and 331:
Index to Rigid Board InsulationCOMP
Page 332 and 333:
Expanded Polystyrene Roof Insulatio
Page 334 and 335:
Extruded Polystyrene Roof Insulatio
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Glass Fiber/Mineral Fiber Roof Insu
Page 342 and 343:
Wood Fiberboard Roof Insulation Boa
Page 344 and 345:
Perlite Roof Insulation Board(Homog
Page 346 and 347:
Polyisocyanurate Roof Insulation Bo
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Composite Roof Insulation Board1. C
Page 358 and 359:
Composite Roof Insulation Board1. C
Page 360 and 361:
Appendix, Rigid Board InsulationAFM
Page 362 and 363:
Material Safety Data Sheet for comp
Page 364 and 365:
important for adhered roof systems
Page 366 and 367:
systems and in place of other roof
Page 368:
THIS PAGE LEFT BLANK INTENTIONALLY3
Page 371 and 372:
8. Shank type9. Point type10. Metho
Page 373 and 374:
Index to Roof FastenersLTWT CONCRET
Page 375 and 376:
Roof Fasteners: Steel Decks1. COMPA
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Roof Fasteners: Wood Decks1. COMPAN
Page 403 and 404:
Roof Fasteners: Wood Decks1. COMPAN
Page 405 and 406: Roof Fasteners: Wood Decks1. COMPAN
Page 433 and 434: Roof Fasteners: Concrete DecksCOMPA
Page 435 and 436: Roof Fasteners: Concrete Decks1. CO
Page 451 and 452: Roof Fasteners: Lightweight Concret
Page 455: Roof Fasteners: Lightweight Concret
Page 473 and 474: Plasti-Cap fasteners are not to be
Page 475: THIS PAGE LEFT BLANK INTENTIONALLY
Page 478 and 479: Index to Cement and CoatingsCEMENT
Page 480 and 481: Roof Cements and Coatings Part 1: G
Page 506 and 507:
Roof Cements and Coatings Part 1: G
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Roof Cements and Coatings Part 2: T
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554:
Appendix, Cement and CoatingsERSYST
Page 557 and 558:
the warranty section of the Low-Slo
Page 559 and 560:
from the information contained unde
Page 561 and 562:
NRCA also asks manufacturers if the
Page 563 and 564:
Index to WarrantiesWarrantyWarranty
Page 565 and 566:
Index to WarrantiesWarrantyWarranty
Page 567 and 568:
Roof Membrane Warranties (Built-Up,
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
624
Page 623 and 624:
21. Contractor’s post-installatio
Page 625 and 626:
17. Ineligible structure or buildin
Page 627 and 628:
18. Pre-construction notice andappr
Page 629 and 630:
13. Wind coverage/exclusions Warran
Page 631 and 632:
11. Determination of warrantyapplic
Page 633 and 634:
16. Minimum charge None Minimum roo
Page 635 and 636:
13. Wind coverage/exclusions14. Spe
Page 637 and 638:
16. Minimum charge 10 years: $500;
Page 639 and 640:
19. Approved, authorized, or licens
Page 641 and 642:
14. Specific conditions to makewarr
Page 643 and 644:
12. Specific exclusions from covera
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
12. Specific exclusions from covera
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
13. Wind coverage/exclusions Warran
Page 661 and 662:
16. Minimum chargeNone10 years: $20
Page 663 and 664:
Page 665:
Page 668 and 669:
Index to Incomplete DataIncomplete
Page 670:
Section 6: Incomplete DataIn publis
show all

General Index - National Roofing Contractors Association

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?