General Index - National Roofing Contractors Association

Roof Fasteners: Wood Decks1. COMPANY NAME POWERS FASTENERS, INC. SENCO PRODUCTS, INC.2. PRODUCT NAME POWERS RAWL SPEED-LOCK TOGGLE SENCO BASE TAPE SYSTEM3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation AttachmentXBuilt-Up Membranes X XSingle-Ply MembranesX5. MATERIAL TYPE CARBON STEEL & STAINLESS STEEL CLASS 1 GALVANIZED STEEL6. COATING TYPE PERMA-SEAL FLUOROPOLYMER (on carbon steel bolt only) SENCOTE PLASTIC POLYMER7. SHANK TYPE ANNULAR THREAD STAPLE-16 GA.8. POINT TYPE NA DIVERGENT9. METHOD OF ATTACHMENT THREADED MECHANICALLY ATTACHED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.250 5 3-1/2 1-1/2 -- 0.062 X 0.55 7/8 -- -- --0.250 6 4-1/2 1-1/2 --0.250 7 5-1/2 1-1/2 --0.250 8 6-1/2 1-1/2 --0.250 9 7-1/2 1-1/2 --0.250 10 8-1/2 1-1/2 --0.250 12 10-1/2 1-1/2 --0.250 14 12-1/2 1-1/2 --11. HEAD SHAPE PHILLIPS FLAT HEAD #3 RECESS STAPLE12. HEAD DIMENSIONS (inches)Thickness 0.042Diameter 0.42613. PLATESRequired (yes/no) YES NOAvailable From Manufacturer (yes/no)YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required)OPTIONALInstallation Tool With Screw Gun (optional/required)REQUIREDSpecial Tool Needed (optional/required)OtherROTARY DRILL WITH WOOD CUTTING BIT (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 7102-inch pine plank --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES NO18. ACCEPTED BY THE FOLLOWING CODES FM ICBO19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES NO20. SEE APPENDIX IF CHECKED XNA = not applicable420