General Index - National Roofing Contractors Association

Roof Fasteners: Wood Decks1. COMPANY NAME OLYMPIC MANUFACTURING GROUP POWERS FASTENERS, INC.2. PRODUCT NAME OLYMPIC FASTENER HD #14 (S.STEEL) POWERS RAWL #14 DECK SCREW3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE STAINLESS STEEL, SPECIAL 400-SERIES BLEND CASE HARDENED CARBON STEEL6. COATING TYPE CR-10 FLUOROCARBON PERMA-SEAL FLUOROPOLYMER7. SHANK TYPE THREADED SPIRAL THREAD8. POINT TYPE PINCH, SELF-DRILLING DRILL TYPE9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.190 1-1/4 3/4 1/2 1 0.238 1-5/8 1-3/8 1/4 --0.190 1-3/4 1-1/4 1/2 1 0.238 2-1/4 2-5/8 1/4 --0.190 2 1-1/2 1/2 1 0.238 2-7/8 3-1/2 1/4 --0.190 3 2-1/2 1/2 1 0.238 3-3/4 4 1/4 --0.190 4 3-1/2 1/2 1 0.238 4-1/2 4-1/4 1/4 --0.190 5 4-1/2 1/2 1 0.238 5 4-3/4 1/4 --0.190 6 5-1/2 1/2 1 0.238 6 5-3/4 1/4 --0.190 7 6-1/2 1/2 1 0.238 7 6-3/4 1/4 --0.190 8 7-1/2 1/2 1 0.238 8 7-3/4 1/4 --0.190 9 8-1/2 1/2 1 0.238 9 8-3/4 1/4 --0.190 10 9-1/2 1/2 1 0.238 10 9-3/4 1/4 --0.190 12 11-1/2 1/2 1 0.238 11 10-3/4 1/4 --0.190 14 13-1/2 1/2 1 0.238 12 11-3/4 1/4 --0.190 16 15-1/2 1/2 10.201 17 16-1/2 1/2 10.201 18 17-1/2 1/2 10.201 20 19-1/2 1/2 10.201 21 19-1/2 1/2 10.201 22 21-1/2 1/2 10.201 24 23-1/2 1/2 111. HEAD SHAPE ROUND TRUSS, #3 PHILLIPS PHILLIPS FLAT TRUSS HEAD #3 RECESS12. HEAD DIMENSIONS (inches)Thickness 0.110 0.118Diameter 0.435 0.44813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STAINLESS STEEL ROUND BARBED 2 GALVALUMEROUND 3 STAINLESS STEEL ROUND 3 GALVALUMEROUND 2 PLASTIC ROUND 3 STAINLESS STEELROUND 2 PLASTIC ROUND 3 PLASTICROUND 3 STEELROUND 3 PLASTICROUND 3-1/2 STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL STAND-UP TOOL (OPTIONAL)Special Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 590 7302-inch pine plank 820 --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, UL, ICBO, METRO-DADE COUNTY FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable418