General Index - National Roofing Contractors Association

Roof Fasteners: Wood Decks1. COMPANY NAME NATIONAL NAIL CORPORATION NATIONAL NAIL CORPORATION2. PRODUCT NAME PLASTI-TOP PLASTI-CAP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE NA NA7. SHANK TYPE ANNULAR THREAD SPIRAL THREAD8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT THREADED FRICTION THREADED FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.990 3/4 1/8 1 1 0.110 3/4 1/8 1 10.990 7/8 1/8 1 1 0.110 7/8 1/8 1 10.990 1 1/8 1 1 0.110 1 1/8 1 10.990 1-1/4 1/2 1 1 0.110 1-1/4 1/2 1 10.990 1-1/2 3/4 1 1 0.110 1-1/2 3/4 1 10.990 1-3/4 1 1 1 0.110 1-3/4 1 1 10.990 2 1-1/4 1 1 0.110 2 1-1/4 1 10.990 2-1/2 1-3/4 1 1 0.110 2-1/2 1-3/4 1 10.990 3 2-1/4 1 1 0.110 3 2-1/4 1 111. HEAD SHAPE ROUND OCTAGON12. HEAD DIMENSIONS (inches)Thickness 0.060 0.060Diameter 1.00 1.0013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no)14. PLATE SHAPE / DIMENSIONS (inches) / MATERIAL-- -- -- -- -- --15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other HAMMER (REQUIRED) HAMMER (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood -- --2-inch pine plank -- --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO BOCA, ICBO18. ACCEPTED BY THE FOLLOWING CODES BOCA, ICBO YES19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES X20. SEE APPENDIX IF CHECKED XNA = not applicable416