General Index - National Roofing Contractors Association

Roof Fasteners: Wood Decks1. COMPANY NAME CARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED2. PRODUCT NAME HP FASTENER HP WOODIE3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL ZAMAC6. COATING TYPE EPOXY ELECTRODEPOSITION7. SHANK TYPE SINGLE LEAD, BUTTRESS THREAD SPIRALTHREAD8. POINT TYPE MINI-DRILL POINT PIERCE-POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.180 1-1/4 1/4 1 1 0.500 1-3/4 0 -- --0.180 1-3/4 3/4 1 1 0.500 2-1/2 1/2 to 3/4 -- --0.180 2-1/4 1-1/4 1 1 0.500 3-1/4 1 to 1-1/2 -- --0.180 2-3/4 1-3/4 1 10.180 3-1/4 2-1/4 1 10.180 3-3/4 2-3/4 1 10.180 4-1/4 3-1/4 1 10.180 5 4 1 10.180 6 5 1 10.180 7 6 1 10.180 8 7 1 10.180 9 8 1 10.180 10 9 1 10.180 11 10 1 10.180 12 11 1 10.180 13 12 1 10.180 14 13 1 10.180 15 14 1 111. HEAD SHAPE WAFER FLUSH RECESS12. HEAD DIMENSIONS (inches)Thickness 0.105 0.073Diameter 0.430 0.60013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALSQUARE W/ROUNDED ROUND 2 GALVALUMECORNER 2-7/8 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUMELOCKING 2 GALVALUME W/PLASTICROUND 2 PLASTICROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)OtherAUTOMATIC FASTENING TOOL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood -- --2-inch pine plank -- --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable402