General Index - National Roofing Contractors Association

Expanded Polystyrene Roof Insulation Board(Homogeneous Only)1. COMPANY NAME AFM R-CONTROL AFM R-CONTROL AFM R-CONTROL ARVRON BENCHMARKBUILDING BUILDING BUILDING INC. FOAM INC.SYSTEMS SYSTEMS SYSTEMS2. STATE MN MN MN MI SD3. PRODUCT NAME AFM AFM CONTOUR AFM PERFORM STEER-O-CELL PERMA-FOAMPERFORM TAPER TILE PROTECT4. DENSITIES PER ASTM C 303 OR OTHER1.00 lbs/ft 2 X X X X X1.25 lbs/ft 2 X X X X X1.50 lbs/ft 2 X X X X X2.00 lbs/ft 2 X X X X X5. SURFACE TREATMENTSRoofing Felt X XFoil Faced Kraft X X XTreated kraftKraftXOther X X X X6. AVAILABLE AS TAPERED MATERIALWith Facer YES YES YESWithout Facer YES YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1966 1966 1994 1978 19778. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(Assuming a continuous mean temperature @1 year 100 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100 100@10 years 100 100 100 100 1009. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY APPROVED SEE APPENDIX SEE APPENDIX UL 1256 ASTM C 578-87ADESIGN NUMBERS; ICBO, BOCA, SBCCI (OTHERS) CO. NO. 411 RADCO 1165CO. NO. 412P225, P701P801, P803SEE APPENDIXP814, P815P817UL 1256FM 445010. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX11. SEE APPENDIX IF CHECKED X X X1. COMPANY NAME BIG SKY CARLISLE CARPENTER FOAM GAFINSULATIONS SYNTEC INSULATION PLASTICS OF MATERIALSINC. INC. COMPANY NEW ENGLAND CORP.2. STATE MT PA VA CT NJ3. PRODUCT NAME SNOFOAM SURE-SEAL CARPENTER DURAFOAM EVERGARD EPSEPS EPS STYRODECK4. DENSITIES PER ASTM C-303 OR OTHER1.00 lbs/ft 2 X X X X X1.25 lbs/ft 2 X X X X X1.50 lbs/ft 2 X X X X X2.00 lbs/ft 2 X X X X X5. SURFACE TREATMENTSRoofing Felt X XFoil Faced Kraft X X XTreated kraft X XKraft X X XOther X X X6. AVAILABLE AS TAPERED MATERIALWith Facer YES NO YES YESWithout Facer YES YES YES YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1977 1981 1977 1976 1,9858. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(Assuming a continuous mean temperature @1 year 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100@10 years 100 100 100 100 >909. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY APPROVED SEE APPENDIX BOCA 93-39 ASTM C 578-91 P225,P231 CONTACTDESIGN NUMBERS; ICBO, BOCA, SBCCI (OTHERS) ICBO 3826 P234,P703 GAFSBCCI 9457 ICBO 3504DADE COUNTY: BOCA 79-0697-1110 HH-I-524-CNEW YORK CITYASTM C578-87a10. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX11. SEE APPENDIX IF CHECKED X X XFor thermal conductance (C) and thermal resistance (R), see the expandedpolystyrene material data sheetNA=not applicable332