General Index - National Roofing Contractors Association

Other Prefabricated Sheet-Applied Membranes Part 2: Test Results1. COMPANY NAME INTERCONTINENTAL COATINGS INTERCONTINENTAL SEAMAN CORP. SEAMAN CORP.2. PRODUCT NAME SA ROOFTEC W SA ROOFTEC WWS FIBERTITE FB FIBERTITE3. PRODUCT DESCRIPTION POLYESTER REINFORCED KEE POLYESTER REINFORCED KEE POLYESTER REINFORCED EIP POLYESTER REINFORCED EIPW/FLEECE BACKING4. THICKNESS METHOD ASTM D 2083 ASTM D 2083 ASTM D 751 ASTM D 751RESULTS 60 MIL 60 MIL 40 MIL 33 MILS NOM5. TENSILE STRENGTH METHOD ASTM D 412 ASTM D 412 ASTM D 751 ASTM D 751, GRAB METHODASTM D 882 ASTM D 882RESULTS 1300 LB/SQ.IN 1500 LB/SQ.IN 375 X 300 LBS. 450 LBS. X 450 LBS.8500 PSI 8500 PSI6. LAP JOINT METHOD METHOD SELF-ADHERED HEAT WELD ASTM D 751 ASTM D 751RESULTS > 400 LBS. >400 LBS.7. ELONGATION AT BREAK METHOD ASTM D412 ASTM D 412 ASTM D 751 ASTM D 751RESULTS 170% 170% 15% WARP X 15% FILL 20% WARP, 30% FILL8. TENSILE SET METHODRESULTS9. LOW TEMPERATURE METHOD CGSB 37-GP56M CGSB 37-GP56M ASTM D 2146 ASTM D 2136FLEXIBILITYRESULTS PASS PASS –30 F, NO CRACKS –30 F, NO CRACKS10. WATER ABSORPTION METHOD ASTM D 471 ASTM D 47114 DAYS @ 70 C 14 DAYS @ 70 CRESULTS 1% 1%11. DIMENSIONAL STABILITY METHODAFTER WATERABSORPTIONRESULTS12. HEATING AGING METHOD ASTM D 3045 (160 F/7 DAYS) ASTM D 30457 DAYS @ 160 FRESULTS >90% STRENGTH RETENTION >90% STRENGTH RETENTION13. OZONE RESISTANCE METHOD 3 DAYS @ 100PPHM -- 100F AND 3 DAYS @ 100PPHM -- 100F AND3 DAYS @ 300 PPHM -- 100 F 3 DAYS @ 300 PPHM -- 100 FRESULTS NO CRACKING NO CRACKING14. RESISTANCE TO METHOD CGSB37 - CGSB37 - ASTM D 2565 ASTM D 2565ACCELERATED GP56M GP56M ASTM E 838WEATHERING RESULTS PASS PASS 5,000 HOURS, NO CRACKING 5,000 HOURS, NO CRACKING3 MILLION LANGLEYS15. DYNAMIC IMPACTING METHOD CGSB37 - CGSB37 - ASTM D 5635 ASTM D 5635(PUNCTURING) GP56M GP56MRESULTS PASS PASS 20 JOULES 15 JOULES16 TEAR RESISTANCE METHOD ASTM D 624 ASTM D 624 ASTM D 751 ASTM D 7518 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLERESULTS 165 LBS. 165 LBS. 50 X 50 LBS. 120 X 12017. TEARING STRENGTH METHOD ASTM D 751 ASTM D 7518 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLERESULTS 50 X 50 LBS. 120 X 12018. LOW TEMPERATURE METHOD ASTM D 2136, –30 F ASTM D 2136,–30 FIMPACTRESULTS NO CRACKING NO CRACKING19. PERMEABILITY METHOD ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96, PROCEDURE AWATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSIONRESULTS 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT. 1.3 G/MXM/24H 1.3 G/MXM/24H20. DIMENSIONAL CHANGE METHOD ASTM D 1204 37-GP-54MAFTER STRESSRELAXATION RESULTS 0.005 SHALL NOT CHANGE MORE21. CONE PENETRATION METHOD 37-GP-54M 37-GP-54MRESULTS PASS PASS22. SEE APPENDIX IFCHECKEDXX256