General Index - National Roofing Contractors Association

More documents

Recommendations

Info

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME TORCHFLEX TORCHFLEXTF-95-FF-BASE TF-95-FF-BASE (22)3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced) X XType II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 118 87Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 79 56Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 55 55Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 73Low temperature flexibility, before and after heat conditioning, F, max. 0 -22 -22Dimensional stability, % max. 0.5 0.0Compound stability at 215 F no failures no failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDIKO INDUSTRIES INC.158
SBS Modified Bitumen Part 2: Test ResultsIKO INDUSTRIES, INC.JOHNS MANVILLE INTERNATIONAL INC.TORCHFLEX ARMOUR BOND ARMOUR BOND ARMOUR ARMOUR GARD DYNAGLAS DYNAPLY DYNAGLAS FRTP-180-FF-BASE 95 180 BRIDGE/PONT ICE & WATERPOLYESTER FIBERGLASS POLYESTER POLYESTER FIBERGLASS FIBERGLASS COMBINATION FIBERGLASSSMOOTH SMOOTH SMOOTH GRANULE SAND GRANULE GRANULE GRANULEXXXXXX12587118 9875 6363 150 15037 90 10011875217144125480675125125-100.2no failures95 954 474 55 45 58 554 4 5 58 85 575 73 100 100-15 -22 -22 -10 -100.5 0.0 0.0 0.2 0.2no failures no failures 212 no failures no failures2 270 74 745075 85-5 -15 -40.35 0.5 0.5no failures no failures no failures0.4159
Page 2 and 3:
2000LOW-SLOPEROOFINGMATERIALSGUIDET
Page 4 and 5:
Table of ContentsLow-Slope Roofing
Page 6 and 7:
Low-Slope Roofing Materials GuideIn
Page 8 and 9:
General IndexWOOD FIBERBOARD INSULA
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 27 and 28:
Information on Section 1: Roof Cove
Page 29 and 30:
3. Type (ASTM standard designation)
Page 31 and 32:
Warranty information for PIB single
Page 33 and 34:
11. ASTM E 331 water penetration12.
Page 35 and 36:
EPDMIndex to Roof CoveringsSPRAY PO
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
THIS PAGE LEFT BLANK INTENTIONALLY
Page 49 and 50:
Built-up RoofingBARRETT COMPANY, TH
Page 51 and 52:
Built-up RoofingCELOTEX CORP.7YESDI
Page 53 and 54:
Built-up RoofingAGS-H+ G/A-H+ AGS-H
Page 55 and 56:
Built-up RoofingM-N-B4 M-C-B3 M-N-B
Page 57 and 58:
Built-up Roofing1000-3 1000-4 1000-
Page 59 and 60:
Built-up RoofingHAI-335-MC HAW-325-
Page 61 and 62:
Built-up RoofingFIRESTONE BUILDING
Page 63 and 64:
Built-up RoofingI-B-3- NN-0- I-0-3-
Page 65 and 66:
Built-up RoofingHENRY COMPANY18YESD
Page 67 and 68:
Built-up RoofingJOHNS MANVILLE INTE
Page 69 and 70:
Built-up RoofingKOPPERS INDUSTRIES,
Page 71 and 72:
Built-up RoofingS3-XEX S3-BEX S4-BB
Page 73 and 74:
Built-up RoofingM4-FHB M4-FBB M4-FE
Page 75 and 76:
Built-up RoofingM2-CXD M2-DXD M2-EX
Page 77 and 78:
Built-up RoofingMFM BUILDING PRODUC
Page 79 and 80:
Built-up RoofingTAMKO ROOFINGTREMCO
Page 81 and 82:
Built-up RoofingTRI-PLY5YESDISTRIBU
Page 83 and 84:
Built-up RoofingBUR PLUS M.-PLY M.-
Page 85 and 86:
Modified Bitumen Part 1 - General I
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108: Modified Bitumen Part 1 - General I
Page 123 and 124: THIS PAGE LEFT BLANK INTENTIONALLY
Page 125 and 126: APP Modified Bitumen Part 2: Test R
Page 141 and 142: SBS Modified Bitumen Part 2: Test R
Page 157: SBS Modified Bitumen Part 2: Test R
Page 185 and 186: Modified Bitumen Part 3: Modified B
Page 205 and 206: THIS PAGE LEFT BLANK INTENTIONALLY
Page 207 and 208: PVC Part 1: General InformationGAF
Page 209 and 210:
PVC Part 1: General InformationIB R
Page 211 and 212:
PVC Part 1: General InformationSARN
Page 213 and 214:
PVC Part 2: Test ResultsTest descri
Page 215 and 216:
PVC Part 2: Test ResultsTest descri
Page 217 and 218:
THIS PAGE INTENTIONALLY LEFT BLANK
Page 219 and 220:
EPDM Part 1: General InformationCAR
Page 221 and 222:
EPDM Part 1: General InformationERS
Page 223 and 224:
EPDM Part 1: General InformationINT
Page 225 and 226:
EPDM Part 1: General InformationOLY
Page 227 and 228:
EPDM Part 1: General InformationROO
Page 229 and 230:
EPDM Part 2: Test ResultsTest descr
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
CSPE (Hypalon) Part 1: General Info
Page 237 and 238:
CSPE (Hypalon) Part 2: Test Results
Page 239 and 240:
PIB (Polyisobutylene ) Part 2: Test
Page 241 and 242:
TPO Part 1: General InformationGENF
Page 243 and 244:
TPO Part 2: Test ResultsTest descri
Page 245 and 246:
Other Prefabricated Sheet-Applied M
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Spray Polyurethane Foam-Based Syste
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Metal Roof Panels1. COMPANY NAME AE
Page 281 and 282:
Metal Roof Panels1. COMPANY NAME AE
Page 283 and 284:
Metal Roof Panels1. COMPANY NAME AM
Page 285 and 286:
Metal Roof Panels1. COMPANY NAME AR
Page 287 and 288:
Metal Roof Panels1. COMPANY NAME AT
Page 289 and 290:
Metal Roof Panels1. COMPANY NAME BE
Page 291 and 292:
Metal Roof Panels1. COMPANY NAME BE
Page 293 and 294:
Metal Roof Panels1. COMPANY NAME BU
Page 295 and 296:
Metal Roof Panels1. COMPANY NAME EN
Page 297 and 298:
Metal Roof Panels1. COMPANY NAME FA
Page 299 and 300:
Metal Roof Panels1. COMPANY NAME FO
Page 301 and 302:
Metal Roof Panels1. COMPANY NAME IN
Page 303 and 304:
Metal Roof Panels1. COMPANY NAME MB
Page 305 and 306:
Metal Roof Panels1. COMPANY NAME MB
Page 307 and 308:
Metal Roof Panels1. COMPANY NAME MC
Page 309 and 310:
Metal Roof Panels1. COMPANY NAME ME
Page 311 and 312:
Metal Roof Panels1. COMPANY NAME ME
Page 313 and 314:
Metal Roof Panels1. COMPANY NAME PE
Page 315 and 316:
Metal Roof Panels1. COMPANY NAME ST
Page 317 and 318:
Metal Roof Panels1. COMPANY NAME UN
Page 319 and 320:
BUTLER MANUFACTURING COMPANYMR-24 i
Page 321 and 322:
quality specifications and are avai
Page 323:
up to 20-ft. X 102-ft. (2,040 squar
Page 326 and 327:
Cellular GlassCellular glass insula
Page 328 and 329:
Index to Rigid Board InsulationCOMP
Page 330 and 331:
Index to Rigid Board InsulationCOMP
Page 332 and 333:
Expanded Polystyrene Roof Insulatio
Page 334 and 335:
Extruded Polystyrene Roof Insulatio
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Glass Fiber/Mineral Fiber Roof Insu
Page 342 and 343:
Wood Fiberboard Roof Insulation Boa
Page 344 and 345:
Perlite Roof Insulation Board(Homog
Page 346 and 347:
Polyisocyanurate Roof Insulation Bo
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Composite Roof Insulation Board1. C
Page 358 and 359:
Composite Roof Insulation Board1. C
Page 360 and 361:
Appendix, Rigid Board InsulationAFM
Page 362 and 363:
Material Safety Data Sheet for comp
Page 364 and 365:
important for adhered roof systems
Page 366 and 367:
systems and in place of other roof
Page 368:
THIS PAGE LEFT BLANK INTENTIONALLY3
Page 371 and 372:
8. Shank type9. Point type10. Metho
Page 373 and 374:
Index to Roof FastenersLTWT CONCRET
Page 375 and 376:
Roof Fasteners: Steel Decks1. COMPA
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Roof Fasteners: Wood Decks1. COMPAN
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Roof Fasteners: Concrete DecksCOMPA
Page 435 and 436:
Roof Fasteners: Concrete Decks1. CO
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Roof Fasteners: Lightweight Concret
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Plasti-Cap fasteners are not to be
Page 475:
Page 478 and 479:
Index to Cement and CoatingsCEMENT
Page 480 and 481:
Roof Cements and Coatings Part 1: G
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Roof Cements and Coatings Part 2: T
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554:
Appendix, Cement and CoatingsERSYST
Page 557 and 558:
the warranty section of the Low-Slo
Page 559 and 560:
from the information contained unde
Page 561 and 562:
NRCA also asks manufacturers if the
Page 563 and 564:
Index to WarrantiesWarrantyWarranty
Page 565 and 566:
Index to WarrantiesWarrantyWarranty
Page 567 and 568:
Roof Membrane Warranties (Built-Up,
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
624
Page 623 and 624:
21. Contractor’s post-installatio
Page 625 and 626:
17. Ineligible structure or buildin
Page 627 and 628:
18. Pre-construction notice andappr
Page 629 and 630:
13. Wind coverage/exclusions Warran
Page 631 and 632:
11. Determination of warrantyapplic
Page 633 and 634:
16. Minimum charge None Minimum roo
Page 635 and 636:
13. Wind coverage/exclusions14. Spe
Page 637 and 638:
16. Minimum charge 10 years: $500;
Page 639 and 640:
19. Approved, authorized, or licens
Page 641 and 642:
14. Specific conditions to makewarr
Page 643 and 644:
12. Specific exclusions from covera
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
12. Specific exclusions from covera
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
13. Wind coverage/exclusions Warran
Page 661 and 662:
16. Minimum chargeNone10 years: $20
Page 663 and 664:
Page 665:
Page 668 and 669:
Index to Incomplete DataIncomplete
Page 670:
Section 6: Incomplete DataIn publis
show all

General Index - National Roofing Contractors Association

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?