General Index - National Roofing Contractors Association

More documents

Recommendations

Info

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME RUBEROID RUBEROID30 30 FR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced) X XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 160 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 65 65Bottom coating thickness (min., mils) 40 NA NA5C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 70 70Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 2 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 40 40Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 2 2Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40 3 3Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20 3 3Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 40 40Low temperature flexibility, before and after heat conditioning, F, max. 0 0 0Dimensional stability, % max. 0.5 0.5 0.5Compound stability at 215 F no failures 215 215Granule embedment, Grade G only, max. grams 2 2 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDGAF MATERIALS CORP154
SBS Modified Bitumen Part 2: Test ResultsGAF MATERIALS CORP.RUBEROID MOP RUBERIOD SBS HW RUBEROID SBS HW RUBEROID SBS HW RUBEROID SBS HW RUBEROID SBS HW MODIFIED BASE MODIFIED CAP(SMOOTH) (SMOOTH) (GRANULES) (FR) (PLUS) (PLUS FR) SHEET SHEET 601+POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASSSMOOTH SMOOTH GRANULE GRANULE GRANULE GRANULE SMOOTH GRANULEXXXXX XX X18.98045NA13065NA140 149145 145 145 14554 5475 75 90 9040 40 40 40 40 40470 701 230 401 23 33 335 4000.5 0.5215 215NA 270 70 70 70 100 10020 20 20 20 20 2050 50 50 50 70 7040 40 40 40 50 5040 40 40 40 60 6070 70 70 70 70 700 0 0 0 0 01.0 1.0 1.0 1.0 1.0 1.0215 215 215 215 215 215NA NA 2 2 2 2155
Page 2 and 3:
2000LOW-SLOPEROOFINGMATERIALSGUIDET
Page 4 and 5:
Table of ContentsLow-Slope Roofing
Page 6 and 7:
Low-Slope Roofing Materials GuideIn
Page 8 and 9:
General IndexWOOD FIBERBOARD INSULA
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 27 and 28:
Information on Section 1: Roof Cove
Page 29 and 30:
3. Type (ASTM standard designation)
Page 31 and 32:
Warranty information for PIB single
Page 33 and 34:
11. ASTM E 331 water penetration12.
Page 35 and 36:
EPDMIndex to Roof CoveringsSPRAY PO
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
THIS PAGE LEFT BLANK INTENTIONALLY
Page 49 and 50:
Built-up RoofingBARRETT COMPANY, TH
Page 51 and 52:
Built-up RoofingCELOTEX CORP.7YESDI
Page 53 and 54:
Built-up RoofingAGS-H+ G/A-H+ AGS-H
Page 55 and 56:
Built-up RoofingM-N-B4 M-C-B3 M-N-B
Page 57 and 58:
Built-up Roofing1000-3 1000-4 1000-
Page 59 and 60:
Built-up RoofingHAI-335-MC HAW-325-
Page 61 and 62:
Built-up RoofingFIRESTONE BUILDING
Page 63 and 64:
Built-up RoofingI-B-3- NN-0- I-0-3-
Page 65 and 66:
Built-up RoofingHENRY COMPANY18YESD
Page 67 and 68:
Built-up RoofingJOHNS MANVILLE INTE
Page 69 and 70:
Built-up RoofingKOPPERS INDUSTRIES,
Page 71 and 72:
Built-up RoofingS3-XEX S3-BEX S4-BB
Page 73 and 74:
Built-up RoofingM4-FHB M4-FBB M4-FE
Page 75 and 76:
Built-up RoofingM2-CXD M2-DXD M2-EX
Page 77 and 78:
Built-up RoofingMFM BUILDING PRODUC
Page 79 and 80:
Built-up RoofingTAMKO ROOFINGTREMCO
Page 81 and 82:
Built-up RoofingTRI-PLY5YESDISTRIBU
Page 83 and 84:
Built-up RoofingBUR PLUS M.-PLY M.-
Page 85 and 86:
Modified Bitumen Part 1 - General I
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104: Modified Bitumen Part 1 - General I
Page 123 and 124: THIS PAGE LEFT BLANK INTENTIONALLY
Page 125 and 126: APP Modified Bitumen Part 2: Test R
Page 141 and 142: SBS Modified Bitumen Part 2: Test R
Page 153: SBS Modified Bitumen Part 2: Test R
Page 185 and 186: Modified Bitumen Part 3: Modified B
Page 205 and 206:
Page 207 and 208:
PVC Part 1: General InformationGAF
Page 209 and 210:
PVC Part 1: General InformationIB R
Page 211 and 212:
PVC Part 1: General InformationSARN
Page 213 and 214:
PVC Part 2: Test ResultsTest descri
Page 215 and 216:
PVC Part 2: Test ResultsTest descri
Page 217 and 218:
THIS PAGE INTENTIONALLY LEFT BLANK
Page 219 and 220:
EPDM Part 1: General InformationCAR
Page 221 and 222:
EPDM Part 1: General InformationERS
Page 223 and 224:
EPDM Part 1: General InformationINT
Page 225 and 226:
EPDM Part 1: General InformationOLY
Page 227 and 228:
EPDM Part 1: General InformationROO
Page 229 and 230:
EPDM Part 2: Test ResultsTest descr
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
CSPE (Hypalon) Part 1: General Info
Page 237 and 238:
CSPE (Hypalon) Part 2: Test Results
Page 239 and 240:
PIB (Polyisobutylene ) Part 2: Test
Page 241 and 242:
TPO Part 1: General InformationGENF
Page 243 and 244:
TPO Part 2: Test ResultsTest descri
Page 245 and 246:
Other Prefabricated Sheet-Applied M
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Spray Polyurethane Foam-Based Syste
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Metal Roof Panels1. COMPANY NAME AE
Page 281 and 282:
Metal Roof Panels1. COMPANY NAME AE
Page 283 and 284:
Metal Roof Panels1. COMPANY NAME AM
Page 285 and 286:
Metal Roof Panels1. COMPANY NAME AR
Page 287 and 288:
Metal Roof Panels1. COMPANY NAME AT
Page 289 and 290:
Metal Roof Panels1. COMPANY NAME BE
Page 291 and 292:
Metal Roof Panels1. COMPANY NAME BE
Page 293 and 294:
Metal Roof Panels1. COMPANY NAME BU
Page 295 and 296:
Metal Roof Panels1. COMPANY NAME EN
Page 297 and 298:
Metal Roof Panels1. COMPANY NAME FA
Page 299 and 300:
Metal Roof Panels1. COMPANY NAME FO
Page 301 and 302:
Metal Roof Panels1. COMPANY NAME IN
Page 303 and 304:
Metal Roof Panels1. COMPANY NAME MB
Page 305 and 306:
Metal Roof Panels1. COMPANY NAME MB
Page 307 and 308:
Metal Roof Panels1. COMPANY NAME MC
Page 309 and 310:
Metal Roof Panels1. COMPANY NAME ME
Page 311 and 312:
Metal Roof Panels1. COMPANY NAME ME
Page 313 and 314:
Metal Roof Panels1. COMPANY NAME PE
Page 315 and 316:
Metal Roof Panels1. COMPANY NAME ST
Page 317 and 318:
Metal Roof Panels1. COMPANY NAME UN
Page 319 and 320:
BUTLER MANUFACTURING COMPANYMR-24 i
Page 321 and 322:
quality specifications and are avai
Page 323:
up to 20-ft. X 102-ft. (2,040 squar
Page 326 and 327:
Cellular GlassCellular glass insula
Page 328 and 329:
Index to Rigid Board InsulationCOMP
Page 330 and 331:
Index to Rigid Board InsulationCOMP
Page 332 and 333:
Expanded Polystyrene Roof Insulatio
Page 334 and 335:
Extruded Polystyrene Roof Insulatio
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Glass Fiber/Mineral Fiber Roof Insu
Page 342 and 343:
Wood Fiberboard Roof Insulation Boa
Page 344 and 345:
Perlite Roof Insulation Board(Homog
Page 346 and 347:
Polyisocyanurate Roof Insulation Bo
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Composite Roof Insulation Board1. C
Page 358 and 359:
Composite Roof Insulation Board1. C
Page 360 and 361:
Appendix, Rigid Board InsulationAFM
Page 362 and 363:
Material Safety Data Sheet for comp
Page 364 and 365:
important for adhered roof systems
Page 366 and 367:
systems and in place of other roof
Page 368:
THIS PAGE LEFT BLANK INTENTIONALLY3
Page 371 and 372:
8. Shank type9. Point type10. Metho
Page 373 and 374:
Index to Roof FastenersLTWT CONCRET
Page 375 and 376:
Roof Fasteners: Steel Decks1. COMPA
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Roof Fasteners: Wood Decks1. COMPAN
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Roof Fasteners: Concrete DecksCOMPA
Page 435 and 436:
Roof Fasteners: Concrete Decks1. CO
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Roof Fasteners: Lightweight Concret
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Plasti-Cap fasteners are not to be
Page 475:
Page 478 and 479:
Index to Cement and CoatingsCEMENT
Page 480 and 481:
Roof Cements and Coatings Part 1: G
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Roof Cements and Coatings Part 2: T
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554:
Appendix, Cement and CoatingsERSYST
Page 557 and 558:
the warranty section of the Low-Slo
Page 559 and 560:
from the information contained unde
Page 561 and 562:
NRCA also asks manufacturers if the
Page 563 and 564:
Index to WarrantiesWarrantyWarranty
Page 565 and 566:
Index to WarrantiesWarrantyWarranty
Page 567 and 568:
Roof Membrane Warranties (Built-Up,
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
624
Page 623 and 624:
21. Contractor’s post-installatio
Page 625 and 626:
17. Ineligible structure or buildin
Page 627 and 628:
18. Pre-construction notice andappr
Page 629 and 630:
13. Wind coverage/exclusions Warran
Page 631 and 632:
11. Determination of warrantyapplic
Page 633 and 634:
16. Minimum charge None Minimum roo
Page 635 and 636:
13. Wind coverage/exclusions14. Spe
Page 637 and 638:
16. Minimum charge 10 years: $500;
Page 639 and 640:
19. Approved, authorized, or licens
Page 641 and 642:
14. Specific conditions to makewarr
Page 643 and 644:
12. Specific exclusions from covera
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
12. Specific exclusions from covera
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
13. Wind coverage/exclusions Warran
Page 661 and 662:
16. Minimum chargeNone10 years: $20
Page 663 and 664:
Page 665:
Page 668 and 669:
Index to Incomplete DataIncomplete
Page 670:
Section 6: Incomplete DataIn publis
show all

General Index - National Roofing Contractors Association

Create successful ePaper yourself

Delete template?

Save as template?