General Index - National Roofing Contractors Association
12.07.2015 • Views
Share Embed Flag

General Index - National Roofing Contractors Association

General Index - National Roofing Contractors Association

General Index - National Roofing Contractors Association

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
nrca.net

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

2000LOW-SLOPEROOFINGMATERIALSGUIDEThe information source on low-slope membranes, insulation boards, roof coatings and cements, rooffastener products and membrane warranties for the commercial roof designer, specifier, installer,manufacture and user.10255 West Higgins Road, Suite 600Rosemont, IL 60018-5607847/299-9070FAX: 847/299-1183E-mail: nrca@nrca.net; Internet: www.nrca.net

Copyright © 2000 by the <strong>National</strong> <strong>Roofing</strong> <strong>Contractors</strong> <strong>Association</strong>. No part of this publication may bereproduced or distributed in any form by any means, or stored in a data base retrieval system, withoutprior written permission from the publisher.

Table of ContentsLow-Slope <strong>Roofing</strong> Materials Guide5 Introduction5 How the Guide Is Organized6 Product Listing With Incomplete Data7 <strong>General</strong> <strong>Index</strong>Section 1: Roof Coverings27 Information on Low-Slope Roof Membrane Products34 <strong>Index</strong> to Listed Roof Coverings48 Built-up <strong>Roofing</strong>84 Modified Bitumen Part 1: <strong>General</strong> Information124 Modified Bitumen Part 2: Test Results184 Modified Bitumen Part 3: Specifications206 PVC Part 1: <strong>General</strong> Information212 PVC Part 2: Test Results218 EPDM Part 1: <strong>General</strong> Information228 EPDM Part 2: Test Results234 CSPE Part 1: <strong>General</strong> Information236 CSPE Part 2: Test Results238 PIB Part 1: <strong>General</strong> Information239 PIB Part 2: Test Results240 TPO Part 1: <strong>General</strong> Information242 TPO Part 2: Test Results244 Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong>Information250 Other Prefabricated Sheet-Applied Membranes Part 2: Test Results258 Spray Polyurethane Foam-Based Systems Part 1: Protective Coatings276 Spray Polyurethane Foam-Based Systems Part 2: Insulation278 Metal Roof Panels317 Manufacturers AppendixSection 2: Rigid Board Insulation325 Information on Rigid Board Insulation328 <strong>Index</strong> to Listed Rigid Board Insulation332 Expanded Polystyrene334 Extruded Polystyrene340 Glass Fiber/Mineral Fiber341 Cellular Glass342 Wood Fiberboard344 Perlite346 Polyisocyanurate Part 1: <strong>General</strong> Information350 Polyisocyanurate Part 2: Test Results356 Composite360 Manufacturers AppendixSection 3: Roof Fasteners371 Information on Roof Fasteners

Table of Contents373 <strong>Index</strong> to Listed Roof Fasteners376 Roof Fasteners: Steel Decks402 Roof Fasteners: Wood Decks434 Roof Fasteners: Concrete Decks452 Roof Fasteners: Lightweight Concrete, Gypsum, and Cementitious WoodFiber Decks473 Manufacturers AppendixSection 4: Roof Cements and Coatings479 Information on Roof Cements and Coatings480 <strong>Index</strong> to Listed Roof Cements and Coatings482 Part 1: <strong>General</strong> Information530 Part 2: Technical Data555 Manufacturers AppendixSection 5: Roof Membrane Warranties559 Information on Roof Membrane Warranties560 Understanding the Warranty Listing565 <strong>Index</strong> to Roof Membrane Warranties568 Roof Membrane WarrantiesSection 6: Incomplete Data665 <strong>Index</strong> to Incomplete Data

Low-Slope <strong>Roofing</strong> Materials GuideIntroductionThe 2000 edition of NRCA’s Low-Slope <strong>Roofing</strong>Materials Guide is a comprehensive report oncommercial, industrial and institutional low-slope roofcovering, rigid insulation board, fastener, andcements and coating products currently on themarket in the United States. It also provides pertinentinformation about the warranties offered for mostmembrane roof systems.The <strong>National</strong> <strong>Roofing</strong> <strong>Contractors</strong> <strong>Association</strong>(NRCA) publishes the guide annually as a service tothe roofing industry. The objective of the guide is toprovide information that will be helpful to users indetermining which specific manufacturers’ productswill best serve their particular needs. It is of specialvalue to those associated with the design,specification, application and use of low-slope roofsystems.The guide’s first edition was published in 1983.From its inception until 1992, it was titled the <strong>Roofing</strong>Materials Guide. The 1993 edition of this publicationwas the first one to bear the title Commercial Low-Slope <strong>Roofing</strong> Materials Guide. The term“commercial low-slope” distinguished it from acompanion publication, the Residential Steep-Slope<strong>Roofing</strong> Materials Guide, which was first published inNovember 1992. The Residential Steep-Slope<strong>Roofing</strong> Materials Guide provided information onasphalt shingle, clay and concrete tile, wood shakeand shingle, fiber-cement and synthetic shingle,slate, architectural metal panel and underlaymentproducts, and asphalt shingle warranties.When applied to the U.S. roofing market, theterms “commercial low-slope” and “residential steepslope”are by no means definitive. Low-slope roofingproducts commonly are used on non-residentialbuildings (e.g., commercial, industrial, andinstitutional buildings) and are sometimes used onresidential buildings (e.g., single family homes,townhouses). Conversely, steep-slope roofingproducts are commonly used on residential buildingsand are sometimes used on non-residential buildings.Beginning in 1999, the titles of these guideschanged to the Low-Slope <strong>Roofing</strong> Materials Guideand the Steep-Slope <strong>Roofing</strong> Materials Guide. Thereason for these title changes, and division of productcategories, is for consistency with other NRCApublications, including The NRCA <strong>Roofing</strong> andWaterproofing Manual.Low-slope roofing products are those primarilyintended for roofs with slopes of 3:12 (14 degrees) orless. Built-up, polymer modified bitumen, single-ply,spray polyurethane foam-based, and structural metalpanel roof systems fit this category.Steep-slope roofing products are defined as thoseprimarily intended for roofs with slopes greater than3:12 (14 degrees). Asphalt shingle, fiber-cement andsynthetic, clay and concrete tile, wood shake andshingle, slate and architectural metal panel roof systemsfit this category.In publishing the Low-Slope <strong>Roofing</strong> Materials Guide,NRCA maintains a policy of objectivity in its reporting ofdata. Nothing is required from listing manufacturers otherthan to adhere to the prescribed reporting format. Anymanufacturer of a product in the product categoriesincluded in the guide can be listed by submitting itsinformation in accordance with procedures developed forthis purpose. Companies involved only in the distributionof other companies’ brand-name roofing products are notincluded in this publication. Manufacturers interested inhaving their products listed in future editions of the guideare encouraged to contact NRCA at:<strong>National</strong> <strong>Roofing</strong> <strong>Contractors</strong> <strong>Association</strong>Attention: <strong>Roofing</strong> Materials Guide10255 West Higgins Road, Suite 600Rosemont, Illinois 60018-5607NRCA exercises due care in accurately reporting thedata supplied by product manufacturers. NRCA does notaudit test procedures used to arrive at the reported data,nor assume responsibility for the accuracy orcompleteness of the data submitted. The presence orabsence of a listing of products or manufacturers in theguide does not imply NRCA’s approval or disapproval ofthe products or companies, nor does NRCA recommendthat any specific materials be used or not.NRCA does not develop standards itself but, instead,works towards and supports the improvements of existingstandards and development of new ones by thoseorganizations responsible for standards development.The fact that materials listed in the guide do or do notmeet all the values of the reference standards,documents, recommendations or criteria does notnecessarily imply that they will or will not produceacceptable roof systems.How the Guide is OrganizedThe Low-Slope <strong>Roofing</strong> Materials Guide is divided intosix primary sections:• Section 1: Roof Coverings• Section 2: Rigid Board Insulation• Section 3: Roof Fasteners• Section 4: Roof Cements and Coatings• Section 5: Roof Membrane Warranties• Section 6: Incomplete Data.There is a general index listing all productmanufacturers included in the guide and the locations oftheir specific product listings at the end of thisintroductory section. Also a listing of all productmanufacturers and the locations of their specific productsis provided at the beginning of each section, withexception to Section 6: Incomplete Data.5

There is also an introduction to information foreach section at the beginning of each section. Theintroduction to Section 1: Roof Coveringsencompasses built-up, polymer modified bitumen,single-ply, spray polyurethane foam-based and metalpanel roof system products.Finally, there are separate appendices at the endof Section 1: Roof Coverings, Section 2: Rigid BoardInsulation, Section 3: Roof Fasteners and Section 4:Roof Cements and Coatings. The purpose of theseappendices is to provide manufacturer-suppliedinformation that expands data listed in the categorysection itself. Appendix information can be found fora product when an “X” appears in the space at theend of the listing entitled “See Appendix if Checked”.When reviewing the data in the guide, usersshould keep in mind that the format is designed tofacilitate side-by-side product comparisons. For thisreason, listing companies can only respond toexisting items of requested information; they cannotadd their own items. Footnoting is not permitted inguide listings; companies instead may expand on orclarify information by providing copy for the appendix.Product Listings with Incomplete DataProduct manufacturers included in the guide areencouraged to provide NRCA with listing informationfor their products that is as complete as possible forpublication in the guide. Beginning with this edition ofthe guide, when manufacturers submit productinformation (e.g., test results) that is incomplete,these specific products have been omitted from thedetailed listing sections of the guide. Manufacturersand products with incomplete product listinginformation are included in a new section of theguide, entitled Section 6: Incomplete Data.NRCA has established this policy regardingmanufacturers’ product listings with incomplete dataat the request of users of the guide, who are clearlyseeking detailed and complete product informationfrom the guide and the companies listed.Users of the guide who are interested in specificproduct information on a manufacturer’s product thatis included in Section 6: Incomplete Data areencouraged to contact the product manufacturerdirectly. Manufacturers’ contact information isprovided in the index section of the guide.6

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONACRYMAX TECHNOLOGIES INC. 482 668221 Brooke Street 530Media, PA 19063610/566-7470FAX: 610/891-0834E-mail: acrymax.comAEP-SPAN 278P O Box 150449Dallas, TX 75315214/827-1746FAX: 214/828-1394Web site: www.aep-span.comAFM R-CONTROL BUILDING SYS. 332 334 356P.O. Box 246Excelsior, MN 55331800/255-0176E-mail: afm@r-control.comWeb site: www.r-control.comALCO-NVC, INC. 482 668P O Box 14001 530Detroit, MI 48214800/323-0029FAX: 313/331-4726E-mail: alconvc@aol.comWeb site: www.alconvc.comALDO PRODUCTS CO., INC. 2581604 N. Main StreetKannapolis, NC 28081704/932-3054FAX: 704/932-3041E-mail: aldocoat@aol.comALLIEDSIGNAL ROOFING SYSTEMS 48 84 340 342 344 346 570 6652000 Regency Parkway, Suite 225 140 350Cary, NC 27511-8507 184919/461-0670 (NC) 800/221-6490FAX: 919/461-4720E-mail: alliedroof@alliedsignal.comWeb site: www.alliedroof.comALUMINUM COATING MFRS. 4837301 Bessemer Avenue 531Cleveland, OH 44127 668800/556-8030FAX: 216/341-5833E-mail: sales@alum.comAMERICAN BUILDING ROOFING 281& ARCHITECTURAL PRODUCTP O Box 800Eufaula, AL 36072334/687-2032FAX: 334/68700298E-mail: info@americanbuildings.comAMERICAN LUBRICANTS CO. 84 5741227 Deeds Avenue 124Dayton, OH 45401937/222-2851FAX: 937/461-77297

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOAMERICAN STEEL BUILDING CO. 283P O Box 14244Houston, TX 77221713/433-5661FAX: 713/433-0847INCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONAMERICAN TAR COMPANY 485 668A Division of Fields Company, LLC 5322240 Taylor WayTacoma, WA 98421253/627-4098FAX 253/627-3859ANDEK CORP. 258 487 665P O Box 392 533 668850 Glen AvenueMoorestown, NJ 08057888/88ANDEKFAX: 888/44ANDEKARS INDUSTRIES 2849606 Parkway East, Suite EBirmingham, AL 32515205/836-6777FAX: 205/836-4090ARVRON INC. 3324720 Clay, SWGrand Rapids, MI 49548616/530-1888ATAS INTERNATIONAL, INC. 285Iron Run Industrial Park6612 Snowdrift RoadAllentown, PA 18106610/395-8445FAX: 610/395-9342E-mail: info@atas.comATLAS ROOFING CORP. 3461775 The Exchange, Suite 160 350Atlanta, GA 30339770/933-4478FAX: 770/952-3170Web site: www.atlasroofing.comBARRETT COMPANY 49 574 6653422 Old Capitol TrailWilmington, DE 19808800/647-0100BENCHMARK FOAM INC. 332 3563200 9th Ave., S.E.Watertown, SD 57201-9102800/658-3444FAX: 605/886-8099E-mail: getfoam@benchmarkfoam.comWeb site: www.benchmarkfoam.com8

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOBERRIDGE MANUFACTURING CO. 288Roof DivisionHouston, TX 77026713/223-4971FAX: 713/433-0847E-mail: sales@berridge.comWeb site: www.berridge.comINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONBIG SKY INSULATION INC. 332 35715 Arden DriveP O Box 838Belgrade, MT 59714406/388-4146BITEC INC. 85 578#2 Industrial Park Dr. 124Morrilton, AR 72110 141800/535-8597 185FAX 501/354-3019E-mail: dga@bitec.comWeb site: www.bi-tec.comBMCA INSULATION PRODUCTS 344 376300 N. Haven AvenueOntario, CA 91761800/858-8868FAX: 909/390-8764BONDCOTE ROOFING SYSTEMS 244 580984 Southford Road 250Middlebury, CT 06762800/368-2160BURKE INDUSTRIES 234 5802250 South 10th St. 236San Jose, Ca 95112408/297-3500 800/297-7010FAX 408/280-0938BUTLER MANUFACTURING CO. 291BMA TowerPenn Valley ParkKansas City, MO 64141816/968-2370FAX 816/968-2371CARLISLE SYNTEC INC 218 244 332 334 342 346 376 582P.O. Box 7000 228 251 351 402Carlisle, PA 17013 434717/245-7000 452FAX 717/245-7245CARPENTER INSULATION CO 332 357P.O. Box 27205Richmond, VA 23261800/288-38369

PVCTPO<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONCELOTEX CORP. 51 87 342 345 347 378 488 584 6664010 Boy Scout Blvd. 125 351 403 533 668Tampa, FL 33607 186 435813/873-1700 454FAX: 813/873-4080E-mail: aharrington@celotex.comCERTAINTEED 54 87ROOFING PRODUCTS GROUP 125750 E. Swedesford Rd 144P O Box 860 187Valley Forge, PA 19482800/359-7298 FAX: 610/341-7055Web site: www.certainteed.comCONKLIN CO. 234 259 489 588 668P.O. Box 155 236 535Shakopee, MN 55379-0155800/888-8838FAX 612/496-4285E-mail: marketing@conklin. comWeb site: www.conklin.comCONSTRUCTION FASTENERS INC. 379Dekfast Product Group 405Spring & Van Reed Box 6326 436Wyomissing, PA 19610 454610/376-5751FAX: 610/376-8551COOLEY ENGINEERED 245MEMBRANE INC. 25150 Esten Avenue Box 939Pawtucket, RI 02862-0939401/724-0490FAX: 401/726-8731E-mail: cooleygroup.comCURVELINE INC. 293P.O. Box 4268Ontario, CA 91761909/947-6022FAX 909/947-1510E-mail: curveline@cyberg8t.comWeb site: www.met.tile/com/curvelineDANOSA CARIBBEAN INC. 89 590 666Box 13757, Santurce Station 147San Juan, PR 00908 189809/785-4545FAX 809/787-3902E-mail: danosapr@icepr.comWeb site:DERMABIT, WATERPROOFING 91 590INDUSTRIES INC. 127P. O Box 273 148Alexandria, VA 22313-0273703/739-2801FAX 703/739-2802DEWITT PRODUCTS CO. 489 6695860 Plumer 535Detroit, MI 48209313/554-0575 800/962-8599FAX 313/554-2171Web site: www.dewitt@globalbiz.com10

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONDIBITEN 91 592P.O. Box 5108 127Denver, CO 80217-5108 189800/342-4836FAX 303/978-3904DOW CHEMICAL CO., THE 335 358Fabricated Products Business Center1605 Joseph Drive, Larkin 200 BuildingMidland, MI 48674517/638-5225DOW CORNING CORPORATION 260P.O. Box 994Midland, MI 48686-0994517/496-6000FAX 517/496-8026DURADEK U.S., LTD. 206 596Ensurco Duradek 2121722 Iron StreetNorth Kansas City, MO 84116800/338-3568FAX: 816/421-2924E-mail: duradek@kcnet.comDURO-LAST INC. 245 381 594525 Morley Drive 252 407Saginaw, MI 48601 437800/248-0280 (All U.S.)FAX 800/432-9331ECOLOGY ROOF SYSTEMS 56 91 245 491505 N. Tustin Avenue #188 127 252 535Santa Ana, CA 92705 149714/972-1001 190FAX: 714/972-1079Web site: www.ecologyroofystems.comENGLERT INC. 2941200 Amboy Ave.Perth Amboy, NJ 08862732/826-8614FAX 732/826-8865ERSYSTEMS 220 245 260 493 598Elastomeric <strong>Roofing</strong> Systems, Inc. 229 252 276 53750 Medina StreetLoretto, MN 55357-0056612/479-6690 FAX: 612/479-6691E-mail: ersinfo@ersystems.comWeb site: www.ersystems.comES PRODUCTS 407280 Franklin Street, P.O. Box 810 455Bristol, RI 02809401/253-8600FAX: 401/253-889611

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOFABRAL 2953449 Hempland RoadLancaster, PA 17601717/397-2741FAX 717/397-1040E-mail: fabinf@fabral.comINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONFIELDS COMPANY, LLC 58 4952240 Taylor Way 537Tacoma, WA 98421253/627-4098FAX 253/383-2181FIRESTONE BUILDING 61 93 206 221 240 347 381 600PRODUCTS CO. 128 212 229 242 352 407525 Congressional Blvd. 151 437Carmel, IN 46032 191 459800/428-4442E-mail: firestonebpco.comFLEX MEMBRANE INTERNATIONAL, 206 245 604INC. 212 253Bethelem DriveMorgantown, PA 19543610/286-7788FAX 610/286-7786E-mail flexroof@compuserve.comFOAM PLASTICS OF NEW ENGLAND 332Route 69Prospect, CT 06712203/758-6651 (CT) 800/2327-3763FAX: 203/758-3162E-mail: foamplastic@sprintmail.comFOLLANSBEE STEEL 297P.O. Box 610Follansbee, WV 26037800/624-6906FAX 304/527-1269E-mail: folrfg@lbcorp.comGAF MATERIALS CORP. 62 95 207 240 332 336 343 345 347 382 499 6061361 Alps Road 129 221 242 353 408 539Wayne, NJ 07470 153 438973/628-3000 192 460800/766-3411FAX: 973/628-3451Web site: www.gaf.comGACO WESTERN, INC. 261P.O. Box 88698 276Seattle, WA 98138-2698800/456-4226FAX 206/575-0587GALVAMET, INC. 2982267 Via Burton StreetAnaheim, CA 92806714/758-4848FAX 714/758-4855E-mail: jgeortner@galvamet.com12

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONGARDNER ASPHALT CORP./APOC 265 499DIVISION 540P.O. Box 5449Tampa, FL 33675-5449FAX 813/248-6768GARLAND COMPANY INC. 6663800 E. 91st Street 669Cleveland, OH 44105216/641-7500FAX 216/641-0633G. E. SILICONES 265division of GENERAL ELECTRIC260 Hudson River Rd. Bldg. 25-73Waterford, NY 12188518/237-3330FAX 518/233-3931GENFLEX ROOFING SYSTEMS 208 222 240 246 6121722 Indian Wood Circle 213 230 243 253Maumee, OH 43537800/448-4272FAX: 419/891-4436Web site: www.genflex.comGEORGIA PACIFIC CORP. 343133 Peachtree St, NEP O Box 105624Atlanta, GA 30348-5624404/652-5547 800/879-7781FAX: 404/230-7845Ej-mail:GMX, INC. 5019105 Way Ave. 541Cleveland, OH 44105216/641-7502FAX 216/641-0633GRACE & CO., W.R. 616 66762 Whittemore AvenueCambridge, MA 02140617/876-1400GRUNDY INDUSTRIES, INC. 502 6691301 Herkimer St. 541Joliet, IL 60432815/726-5087 800/435-1210FAX 815/726-7301GS ROOFING PRODUCTSCO. INC.See: Certainteed Corporation13

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONHENRY COMPANY 65 505 6182911 Slauson Avenue 543Huntington Park, CA 90255213/583-5000FAX 213/582-6429HICKMAN SYSTEMS INC., W.P. 8230700 Solon Industrial ParkwaySolon, OH 44139440/248-7760FAX 440/248-6524E-mail: wphickman@wphickman.comHILTI INC. 385P. O. Box 21148 410Tulsa, OK 21148 439800/879-8000 462FAX: 918/252-6988E-mail: ushilti.comHUEBERT FIBERBOARD CO. 3431545 E. Morgan Street, Box 167Booneville, MO 65233660/882-2704FAX: 660/882-2704IB ROOF SYSTEMS 2092877 Chad Drive-B 214Eugene, OR 97408541/242-2871FAX: 541/302-6692E-mail: solution@ibroof.comICA, INC. 98P.O. Box 679 129Warrington, PA 18976 194215/918-0889FAX 215/918-0890E-mail: hedges1@aol.comIKO INDUSTRIES 98 666120 Hay Rd. 131Wilmington, DE 19809 156302/764-3100 194FAX 302/764-5852IMPER ITALIA S.P.A. 666 620Strada Lanzo 13110148 Torino, ITALY11-262-0941FAX 11-262-1621INNOVATIVE METALS CO., INC. 2992070 Steel DriveTucker, GA 30084770/908-1030FAX 770/908-226414

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINSUL-BOARD, INC. 3332120 Colonial Ave.P.O. Box 679Erie, PA 16505814/833-7400FAX: 814/838-4774E-mail: insul@erie.netINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONINSULATED BUILDING SYSTEMS, INC. 333 3589912 Georgetown Pike, Suite D2Great Falls, VA 22066703/757-0118FAX: 703/757-0119E-mail: aol.com/insbldgsys/libs.htmINSULATION CORP. OF AMERICA 3332571 Mitchell AvenueAllentown, PA 18103610/791-4200INTEC/PERMAGLAS 66 620P.O. Box 2845Port Arthur, TX 77643800/231-4631FAX 409/724-2348E-mail: support@usintec.comINTERCONTINENTAL COATINGS 246CORP, (I-CON) 25416744 W. Park Circle DriveChagrin Falls, OH 44023440/543-3114FAX: 440/543-3443INTERNATIONAL DIAMOND 222 620SYSTEMS INC. 230P.O. Box 351950Toledo, OH 43635419/382-0111FAX 419/382-3275IPS Insulated Panel Systems 301P . O. Box 968Stafford, TX 77497-0968281/499-2605FAX 281/499-3363ITW BUILDEX 3861349 W. Bryn Mawr Avenue 411Itasca, IL 60143 441800/284-5339 630/595-33500 463FAX: 630/595-6329JOHNS MANVILLE INTNL 67 101 209 223 340 345 347 389 622<strong>Roofing</strong> Systems Group 131 215 230 354 414P.O. Box 5108 159 443Denver, CO 80217 195 464303/978-2000FAX 303/978-390415

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONKARNAK CORPORATION 68 508330 Central Avenue 545Clark, NJ 07066732/388-0300 800/526-4236FAX 732/388-9422Web site: www.karnakcorp.comKEMPER SYSTEMS, INC. 511550 S. Michigan St. 546Seattle, WA 98108206/767-9505 800/541-5455FAX 206/767-9531E-mail: kempersys.comKNAUF USA POLYSTYRENE 3332725 Henkle DriveLebanon, OH 45036513/922-6823FAX: 513/932-3506KOKEM PRODUCTS INC. 5114432 N.E. Davis 546Portland, OR 97213503/235-9206FAX 503/235-9206KOPPERS INDUSTRIES INC. 69 343 345 348 630 666436 Seventh Avenue 355Pittsburgh, PA 15219800/558-2706FAX: 412/227-2002Web site: www.koppers.comLUCAS SALES CO., INC. 336 34510623 Baur Blvd.St. Louis, MO 63132314/993-9610FAX: 314/993-4836MALARKEY ROOFING CO. 70 103 618P.O. Box 17217 132Portland, OR 97217-0217 162503/283-1191 OR 800/545-1191 196MBCI/NCI 301P.O. Box 38217Houston, TX 77238281/445-8555FAX 281/445-1791E-mail www.mbci.comMBTECHNOLOGY CORPORATION 632 666188 South Teilman AveFresno, CA 93706800/621-9281FAX 209/233-460716

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOMCELROY METAL CO. 3051500 Hamilton RoadBossier City, LA 71111318/747-8000FAX 318/747-8029INCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONMERCHANT & EVANS INC. 308100 Connecticut DriveBurlington, NJ 08016609/387-3033FAX 609/387-4838METACRYLICS ACRYLIC 511POLYESTER ROOFING PRODUCT 546142 N. 27th StreetSan Jose, CA 95116408/280-7733FAX 408/280-6329E-mail: metacrylics@msn.comMETAL SALES MFG CORP 3107800 State Rd. 60Sellersburg, IN 47172812/246-0819FAX 812/246-0829E-mail: pserv@aye.netWeb site: www.mtlsales.comMFM BUILDING PRODUCTS 77P.O. Box 340520 Orange St.Coshocton, OH 438127404/622-2645 800/882-7663E-mail: mfm@coshocton.comMONSEY - DIV OF HENRY CO. 513336 Cold Stream Road 547Kimberton, PA 19442 669800/523-0268FAX: 610/933-4598MONSEY BAKOR 105 636336 Cold Stream Road 163Kimberton, PA 19442 199800/523-0268FAX 610/933-4598E-mail: monsey-bakor.comMULE HIDE PRODUCTS CO., INC. 209 224 234 6362924 Wyetta Drive 215 231 236Beloit, WI 53511608/365-3111NATIONAL COATINGS CORP. 265 5171201 Calle Suerte 276 549Camarillo, CA 93012805/388-7112FAX 805/388-8140E-mail: nationalcoatings.com17

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONNATIONAL NAIL CORP. 4152964 Clydon, SW 443Grand Rapids, MI 49509800/746-5659FAX: 616/531-5970NEOGARD, DIV JONES BLAIR 2656900 Maple Avenue P.O. Box 35288Dallas, TX 75235800/321-6588FAX 214/357-7532E-mail: neogard@neogard.orgNORTH CAROLINA FOAM IND. 2771515 Carter St. P.O. Box 1528Mount Airy, NC 27030336/789-9161FAX 336/789-9586Web site: www.ncfi.comOLYMPIC MANUFACTURING GROUP 391P.O. Box 508 417153 Bowles Road 443Agawam, MI 01001 465800/633-3800 413/789-0252FAX: 413/789-1069E-mail: info@olyfast.comOLYMPIC RUBBER ROOFING 224 636SYSTEMS INC. 231P.O. Box 091082Milwaukee, WI 53209800/552-5393 414/442-3117OWENS CORNING 337275 Southwest AvenueTallmadge, OH 44278330/633-6735OWENS CORNING FALCON FOAM 3338240 Byron Center RoadByron, MI 49315616/878-1588FAX: 616/878-0874PACEMAKER PLASTICS CO., INC. 333126 New Pace Road, P. O. Box 279Newcomerstown, OH 43832800/446-2188FAX: 740/498-4184E-mail: pacemaker@tusco.netWeb site: www.pacemakerplastics.comPERFORMANCE ROOF SYSTEMS 107 368 6674821 Chelsea Ave. 133Kansas City, MO 64130 200816/921-0221FAX 816/921-5540E-mail: prshunt@aol.com18

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOPETERSEN ALUMINUM 3111005 Tonne Rd.Elk Grove Village, IL 60007800/323-1960FAX 800/722-7150INCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONwww.pac-clad.comPITTSBURGH CORNING CORP. 341800 Presque Isle DrivePittsburg, PA 15239800/359-8433FAX: 724/327-5890Web site: www.foamglas/insulation.comPLASTIC COATINGS CORP. 267P.O. Box 1068St. Albans, WV 25177304/755-9151FAX 304/755-0229PLYMOUTH FOAM INC. 3331800 Sunset DrivePlymouth, WI 53073920/893-0535FAX: 920/892-4986Web site: www.plymouthfoam.comPOLY FOAM INC. 333116 Pine Street, SouthLester Prairie, MN 55354-0218320/395-2551POLYDYNE 267260 Grell LaneJohnson Creek, WI 53038800/225-7659FAX 414/648-5647POLYFOAM PACKERS CORP. 358Construction Products Division3751 Sunset AvenueWaukegan, IL 60067800/800-0359 847/263-0200FAX: 847/263-0350POLYGLASS USA 108 667150 Lyon Drive 135Fernley, NV 89408 166702/575-6007 201FAX 702/575-2314E-mail: otto@polyglass.comPOLYTHANE SYSTEMS, INC. 269P.O. Box 1452 277Spring, TX 77383-6450281/350-9000FAX 281/288-6450E-mail: ridgestock@aol.com19

PVCTPO<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONPOWERS RAWL, 393Powers Fasteners, Inc. 418New Rochelle, NY 10801 445914/235-6300 467FAX: 914/576-6483PROTECTIVE COATINGS INC. 225 6421620 Birchwood Avenue 231Fort Wayne, IN 46803800/992-8299FAX: 219/422-7147QUANTUM COATING 2699200 Latty AvenueSt. Louis, MO 63042800/624-4995FAX: 314/524-6522R-MAX INC. 34813524 Welch Road 355Dallas, TX 75244972/387-4500FAX: 972/387-4673Web site: www.rminc.comREPUBLIC POWDERED METALS, INC. 238 517 642 6693735 Green Road 293 549Beachwood, OH 44122800/551-7081FAX: 888/742-1759R.M. LUCAS CO. 518 6693211 South Wood St. 549Chicago, IL 60608773/523-4300FAX 773/523-3290E-mail: rmlucas@ix.netcam.comROOFING PRODUCTS 226 644INTERNATIONAL 23257460 Dewitt St.Elkhart, IN 46517800/628-2957 219/293-9096FAX 219/294-3450Web site: www.roofingproductsint.comSARNAFIL INC. 210 646100 Dan Road 216Canton, MA 02021800/451-2504SEAMAN CORPORATION 247 646FiberTite <strong>Roofing</strong> Systems 2561000 Venture Blvd.Wooster, OH 44691800/927-8578FAX: 800/649-273720

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONSENCO PRODUCTS 4208485 Broadwell RoadCincinnati, OH 45244800/543-4596FAX: 800/543-3299Web site: www.senco.comSFS STADLER INC. 3945460 Wegman Drive 421Valley City, OH 44280 446330/273-7171 800/648-6032 468FAX: 330/273-7181SIMPLEX NAILS & FASTENERS, INC. 424100 Petty Road, Suite A 448Lawrenceville, GA 30043-4813 469800/622-3354FAX: 770/822-6822E-mail: technical@www.simplexnails.comSIPLAST INC. 111 6501111 Hwy. 67 South 167Arkadelphia, AR 71923 202870/246-8094E-mail: kersey@siplast.comSOMAY PRODUCTS, INC. 6694301 N.W. 35th AvenueMiami, FL 33142-4382305/633-6333FAX 305/638-5524E-mail: paint@somay.comSOPREMA, INC. 113 652310 Quadral Drive 171Wadsworth, OH 44281330/334-0066 800/356-3521FAX 330/334-4289SOUTHWESTERN PETROLEUM 78 521 652 669CORPORATION (SWEPCO) 551534 No. Main St. P.O. Box 961005Fort Worth, TX 76161-0005817/332-2336 800/877-9372FAX 817/877-4047E-mail: swepcousa.comSPM THERMO-SHIELD INC. 522Rt. 2, Box 208A 551Custer, SD 57730605/673-3201FAX 605/673-3200E-mail: spm@thermoshield.comWeb site:STEELOX ROOF SYSTEMS 313P.O. Box 8181Mason, OH 45040-8181513/573-5200FAX 513/573-551121

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONSTEVENS ROOFING SYSTEMS 235 241 628J.P.S. Elastomerics Corp. 237 2439 Sullivan RoadHolyoke, MA 01040-2800800/621-ROOFFAX 413/552-1198E-mail: info@stvroof.comSUNGUARD MARKETING CORP. 6694432 N.E. DavisPortland, OR 97213503/235-9206FAX 503/235-9206SWD URETHANE COMPANY 271222 South Date St. 277Mesa, AZ 85210480/969-8413 800/828-1394FAX 480/461-6926E-mail: whip@swdurethane.comWeb site: www.swdurethane.comT-CLEAR CORPORATION 359P. O. Box 416Hamilton, OH 45012800/544-7398 or 513/870-9243FAX: 513/870-9606E-mail: telesouth1.comTAMKO ROOFING PRODUCTS, INC. 117 522 654220 West 4th Street PO Box 1404 137 551Joplin, MO 64802 179417/624-6644 202FAX 417/624-8935Web site: www.tamko.comTEMPLE 343P O Drawer NDiboll, TX 75941409/829-1254 800/231-6060Web site: www.temple.comTENNECO BUILDING PRODUCTS 3392907 Log Cabin DriveSmyma, GA 30080-7013800/241-4402FAX: 404/350-1489TEXAS REFINERY CORP. 119 524 660 670One Refinery Place P.O. Box 711 138 553Ft. Worth, TX 76101 204817/332-1161FAX 817/332-2340Web site: www.texasrefinery.comTEXSA, S.A. 119Poligono Can Pelegri 138San Andreu de la Barca, Spain 18134-3-6820770 204FAX 34-3-682075222

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOTHERMCO INDUSTRIES INC. 333809 E 15th St., P.O. Box 49Washington, IA 52353800/247-7831 319/653-6216TOPCOAT, INC., A SUBSIDIARY 524 670OF GAF MATERIALS CORP. 55324 Industrial RoadWalpole, MA 02081-1305800/323-0009FAX 508/660-2471TREMCO INC. 79 119 235 238 525 6603735 Green Rd. 181 237 239 553P.O. Box 228069Beachwood, OH 44122-8069216/292-5000FAX: 216/766-5629Web site: www.tremcoroofing.comTRI-PLY 80 389P.O. Box 2685Port Arthur, TX 77643800/331-3007FAX 409/727-0771TRU-FAST CORPORATION 39902105 William County Road 12-C 431Bryan, OH 43506 449800/443-9804 471FAX: 419/636-1784E-mail: tru-fast@bright.netWeb site: trufast.comUCSC, LTD. 2721208 N. Grand 277Roswell, NM 88201505/623-9726FAX 505/623-1908E-mail: ucscurethane.comUNIFLEX, INDUSTRIAL DIV. OF 527 670KOOL SEAL, INC. 5551499 Enterprise ParkwayTwinsburg, OH 44087216/425-4717FAX 216/425-9778UNIROOF CORPORATION 528 667P.O. Box 160133 555 668Altamonte Springs, FL 32716-0133407/869-5110UNITED COATINGS 273 52819011 E Cataldo 555Greenacres, WA 99016509/926-7143FAX 509/928-111623

<strong>General</strong> <strong>Index</strong>WOOD FIBERBOARD INSULATIONCELLULAR GLASS INSULATIONGLASS FIBER / MINERAL FIBERINSULATIONEXTRUDED INSULATIONEPS INSULATIONMETALOTHER PRE-FABRICATEDMODIFIED BITUMENBUILT-UP ROOFINGSPF BASED SYSTEMSPERLITE INSULATIONCSPE/PIBEPDMPVCTPOUNITED STEEL DECK INC. 314475 Springfield AvenueP.O. Box 662Summit, NJ 07902-0662908/277-1617FAX 908/277-1619E-mail: heagler@ix.netcom.comINCOMPLETE DATAMEMBRANE WARRANTIESCEMENTS & COATINGSROOF FASTENERSCOMPOSITE INSULATIONPOLYISOCYANURATEINSULATIONU.S. INTEC INC. 120 349 401 6621361 Alps Road 139 355 433Wayne, NJ 07470 182 451800/624-6832 472FAX: 973/628-4167Web site: www.usintec.comVERSICO INCORPORATED 227 248 6643485 Fortuna Drive 232 257Akron, OH 44312216/644-6700 800/992-7663FAX 216/644-2613VINCENT METAL GOODS 316P.O. Box 360Minneapolis, MN 55440612/717-9000FAX 612/717-7122W P HICKMAN SYSTEMS INC. 82 235 664 66730700 Solon Industrial Parkway 237Solon, OH 44139440/248-7760FAX 440/248-6524E-mail: wphickman@wphickman.comWOOLLEY & COMPANY 3336865 Mimms DriveDoraville, GA 30340770/448-8473FAX: 770/448-306124

Information on Section 1: Roof Coverings<strong>General</strong> InformationSection 1: Roof Coverings in the 2000 edition ofNRCA’s Low-Slope <strong>Roofing</strong> Materials Guide is dividedinto 10 primary sections based on roof covering producttype. These primary sections are as follows:• Built-up membrane• Modified bitumen sheet membrane• PVC single-ply membrane• EPDM single-ply membrane• CSPE single-ply membrane• PIB single-ply membrane• TPO single-ply membrane• Other prefabricated single-ply membranes• Spray polyurethane foam-based• Metal panelsA specific description of each particular roof coveringtype and a general description of the specificinformation contained within each primary section areincluded at the conclusion of this <strong>General</strong> Informationsection.An index of the manufacturers included in Section 1:Roof Coverings and locations of their specific productswithin this section immediately follows this RoofCoverings section.9. Hot and/or cold applied10. Deck type11. Slope requirements12. Number of plies13. Type of felt14. Interply adhesive15. Surfacing16. Weight17. Restricted regions18. Year of first commercial use19. Test results per NBS BSS #55Reporting of test result data for built-up membranesystems is provided in Item 19: Test Results per NBSBSS #55 on the basis of the <strong>National</strong> Bureau ofStandards (NBS) Building Science Series (BSS) #55,titled “Preliminary Criteria for Bituminous Membrane<strong>Roofing</strong>”, dated 1974.Warranty information for built-up membrane roofsystems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding built-up membrane roof systemsare encouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth Edition.Built-Up MembraneA built-up roof membrane is defined in The NRCA<strong>Roofing</strong> and Waterproofing Manual, Fourth Edition as“a continuous, semi-flexible multi-ply roof membrane,consisting of plies or layers of saturated felts, coatedfelts, fabrics or mats between which alternate layers ofbitumen are applied. <strong>General</strong>ly, built-up roofmembranes are surfaced with mineral aggregate andbitumen, a liquid-applied coating or a granule-surfacedcap sheet.”Information on built-up membrane products ispresented in the guide on the basis of built-upmembrane system designations provided by the listingmanufacturers. Manufacturers’ system designationstypically identify the specific membrane substrate,number and type of membrane plies, interply bitumenand surfacing.Specific listing information included in the guide formanufacturers’ built-up membrane systemspecifications is as follows:1. Number of regional service locations2. Licensed application agreement3. Distribution method4. Preformed accessories available5. Limitations/Restrictions6. Sales/Technical information7. Felts data: Trade name8. Specification number27Modified Bitumen Sheet MembraneA modified bitumen sheet membrane is defined in TheNRCA <strong>Roofing</strong> and Waterproofing Manual, FourthEdition as a “composite sheet consisting of a polymermodified bitumen often reinforced and sometimessurfaced with various types of mats, films, foils andmineral granules.” Polymer modified bitumen is furtherdefined as “a bitumen modified through the inclusion ofone or more polymers.” The most common modifiersused in bitumen polymer modification are atacticpolypropylene (APP) and styrene butadiene styrene(SBS).Information on modified bitumen sheet products ispresented in the guide in three parts: Part 1: <strong>General</strong>Information, Part 2: Test Results and Part 3: ModifiedBitumen Specifications. Part 2: Test Results is furtherdivided into two sections based upon polymer modifiertype, APP Modified Bitumen Part 2: Test Results andSBS Modified Bitumen Part 2: Test Results.Specific listing information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Kinds of field surfacing required5. Use in6. Field joint lap method7. Types of roof systems

8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results for APP modified bitumen sheetproducts, specific listing information is as follows:1. Company name2. Product name3. Product description4. Complies with (ASTM standard designation)5. Dimensions and masses of sheet materials6. Physical properties.Reporting of test result data for Items 4, 5 and 6 isbased upon the following American Society for Testingand Materials (ASTM) standards:• ASTM D6222-98, titled “Standard Specification forAtactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements”• ASTM D6223-98, titled “Standard Specification forAtactic Polypropylene (APP) Modified BituminousSheet Materials Using a Combination of Polyesterand Glass Fiber Reinforcements”.In Part 2: Test Results for SBS modified bitumen sheetproducts, specific listing information is as follows:1. Company name2. Product name3. Product description4. Complies with (ASTM standard designation)5. Dimensions and masses of sheet materials6. Physical properties.Reporting of test result data for Items 4, 5 and 6 isbased on the following American Society for Testingand Materials (ASTM) standards:• ASTM D6162, titled “Standard Specification forStyrene Butadiene Styrene (SBS) ModifiedBituminous Sheet Materials Using a Combination ofPolyester and Glass Fiber Reinforcements”• ASTM D6163, titled “Standard Specification forStyrene Butadiene Styrene (SBS) ModifiedBituminous Sheet Materials Using Glass FiberReinforcements”• ASTM D6164, titled “Standard Specification forStyrene Butadiene Styrene (SBS) ModifiedBituminous Sheet Materials Using PolyesterReinforcements”.In Part 3: Modified Bitumen Specifications,manufacturers listing information is provided basedupon the following• Company name• Manufacturers specification number• Type of roof installation and substrate• Total number of plies• Base sheet description• Names of sheet products used in membraneWarranty information for modified bitumen membraneroof systems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding modified bitumen membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.PVC Single-Ply MembraneA polyvinyl chloride (PVC) single-ply membrane is afactory-manufactured thermoplastic sheet consisting ofa reinforcing fabric and a synthetic thermoplasticpolymer prepared from vinyl chloride.Information on PVC single-ply membrane sheetproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Coating required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Method of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name28

3. Type (ASTM standard designation)4. Overall thickness5. Tensile strength6. Breaking strength7. Elongation8. Seam strength9. Retention of properties after heat aging10. Tear resistance11. Tear strength12. Low temperature bend13. Accelerated weathering14. Linear dimensional change15. Change in weight after water immersionReporting of test result data in Items 3 though 15 isbased on American Society for Testing and Materials(ASTM) Standard D4434-95, titled “Specification forPoly (Vinyl Chloride) Sheet <strong>Roofing</strong>.”Warranty information for PVC single-ply membrane roofsystems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding PVC single-ply membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.EPDM Single-Ply MembraneAn ethylene propylene diene monomer (EPDM), orterpolymer, single-ply membrane is factorymanufacturedthermoset single-ply membrane that isprincipally composed of two components, ethylene andpropylene. When these components are combinedwith diene, a flexible rubber matrix is formed. EPDMsingle-ply membranes are available in two types, nonreinforcedand reinforced.Information on EPDM single-ply membrane sheetproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Coatings required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Grade4. Class5. Thickness6. Breaking strength7. Tensile strength8. Ultimate elongation9. Tensile set10. Tear resistance11. Tearing strength12. Brittleness point13. Ozone resistance14. Heat aging15. Water absorption16. Factory seam strength17. Weather resistanceReporting of test result data for Items 3 though 17 isbased upon American Society for Testing and Materials(ASTM) Standard D4637-96, titled “Specification forVulcanized Rubber Sheet Used in Single-Ply RoofMembrane.”Warranty information for EPDM single-ply membraneroof systems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding EPDM single-ply membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.CSPE Single-Ply MembraneA chlorosulfonated polyethylene (CSPE) single-plymembrane is factory-manufactured thermoset singleplymembrane that is principally composed of asynthetic rubber material commonly called Hypalon,which is a proprietary trade name of a compounddeveloped by E.I. duPont de Nemours & Co., Inc.Information on CSPE single-ply membrane sheetproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:29

1. Company name2. Product name3. Product description4. Coating required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Sheet construction4. Thickness5. Breaking strength6. Elongation7. Tearing strength8. Low temperature bend9. Linear dimensional change10. Fabric adhesion11. Ply adhesion12. Hydrostatic resistance13. Ozone resistance18. Weather resistanceReporting of test result data for Items 3 though 14 isbased on American Society for Testing and Materials(ASTM) Standard D5019-96, titled “Specification forReinforced Non-Vulcanized Polymeric Sheet Used in<strong>Roofing</strong> Membrane.”Warranty information for CSPE single-ply membraneroof systems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding CSPE single-ply membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.PIB Single-Ply MembraneA polyisobutylene (PIB) single-ply membrane is factorymanufacturedthermoplastic single-ply membrane thatis composed of a butyl-based compound that isextruded into sheet form.Information on PIB single-ply membrane sheetproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Coating required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Thickness4. Breaking strength5. Elongation6. Tearing strength7. Low temperature bend8. Linear dimensional change9. Fabric adhesion10. Hydrostatic resistance11. Ozone resistance12. Weather resistance13. Tensile strength of coating14. Elongation of coating15. Tear resistance of coating16. Ozone resistance of coating17. Water absorption of coatingReporting of test result data for Items 3 though 17 isbased on American Society for Testing and Materials(ASTM) Standard D5019-96, titled “Specification forReinforced Non-Vulcanized Polymeric Sheet Used in<strong>Roofing</strong> Membrane.”30

Warranty information for PIB single-ply membrane roofsystems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding PIB single-ply membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.Warranty information for TPO single-ply membrane roofsystems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding TPO single-ply membrane roofsystems are encouraged to refer to The NRCA <strong>Roofing</strong>and Waterproofing Manual, Fourth Edition.TPO Single-Ply MembraneA thermoplastic olefin (TPO) is a factory manufacturedthermoplastic single-ply membrane that is compoundedfrom a blend of polypropylene and ethylene-propylenepolymers. TPO single-ply membranes are available intwo types, non-reinforced and reinforced.Information on TPO single-ply membrane sheetproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Coating required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Manufacturing plant location(s)18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Type/class4. Physical propertiesReporting of test results data for Items 3 and 4 is basedon a draft American Society for Testing and Materials(ASTM) product standard for the sheet membrane.Other Prefabricated Single-Ply MembranesOther prefabricated single-ply membrane products aresheet-applied membrane products that do not fitclassifications as PVC, EPDM, CSPE, PIB or TPOproducts.Information on other prefabricated single-ply membraneproducts is presented in the guide in two parts: Part 1:<strong>General</strong> Information and Part 2: Test Results.Specific information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Coating required5. Use in6. Field lap joint method7. Types of roof systems8. Minimum slope required9. Acceptable substrates10. Restricted regions11. Workable temperature range12. Flashing material13. Flashing method14. Preformed accessories available15. Country of origin and manufacture16. Year of first commercial use17. Number of squares installed18. Methods of distribution19. Number of regional locations20. Licensed applicator agreement21. Sales information contact22. Technical information contactIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Product description4. Thickness5. Tensile strength6. Lap joint method7. Elongation at break8. Tensile set9. Low temperature flexibility10. Water absorption11. Dimensional stability12. Heat aging31

13. Ozone resistance14. Accelerated weathering15. Dynamic impacting16. Tear resistance17. Tearing strength18. Low temperature impact19. Permeability20. Dimensional change21. Cone penetrationReporting of test results data for Items 4 through 21 isbased on recognized test methods. The specific testmethods utilized are at the discretion of the listingmanufacturers for their specific products; the specifictest methods utilized by the manufacturers are listedwithin the test data.Warranty information for other prefabricated single-plymembrane roof systems is provided in Section 5: RoofMembrane Warranties.Users of the guide who are interested in additionalinformation regarding other prefabricated single-plymembrane roof systems are encouraged to refer to TheNRCA <strong>Roofing</strong> and Waterproofing Manual, FourthEdition.Spray Polyurethane Foam-BasedSpray polyurethane foam-based (SPF) roof systemsconsist of a two-part liquid that is spray-applied in thefield to form an insulation base. Over this base, aprotective coating is applied, which provides theweatherproofing component of the roof system.Information on SPF-based roof system products ispresented in the guide in two parts: Part 1: ProtectiveCoatings and Part 2: Insulation.Specific information included in Part 1: ProtectiveCoatings is as follows:1. Company name2. Product name3. Coating description4. Name of base coat and top coat5. Number of coating applications required6. Required dry film thickness7. Film cure time8. Minimum slope required9. Requirements for use10. Flashing material11. Application conditions12. Application equipment requirements13. Restricted regions14. Restricted building uses15. Recommended recoating schedule16. Physical properties17. UL 790, Class A18. Foam insulation requirements19. Foam available from manufacturer20. Year of first commercial use21. Number of squares installed22. Manufacturer-qualified applicator required23. Methods of distribution24. Number of regional service locations25. Sales and technical information contactsSpecific information included in Part 2: insulation is asfollows:1. Company name2. Product name3. Recommended types of protective coatings4. System coating available from manufacturer5. Required application conditions6. Physical properties of the foam7. UL 790, Class A8. Year of first commercial use9. Number of squares installed10. Manufacturer-qualified applicators required11. Methods of distribution12. Number of regional sales locations13. Sales and technical information contactsUsers of the guide who are interested in additionalinformation regarding SPF-based roof systems areencouraged to refer to The NRCA SPF-Based <strong>Roofing</strong>Manual or The NRCA <strong>Roofing</strong> and WaterproofingManual, Fourth Edition.Metal PanelMetal panel roof systems are traditionally divided intotwo categories: structural metal panels andarchitectural metal panels. <strong>General</strong>ly, structural metalpanel roof systems are installed on low-slope roofs,that is roofs with slopes less than 3:12 (14 degrees).Architectural metal panel roof systems are generallyinstalled on steep-slope roof systems, that is roofs withslopes of 3:12 (14 degrees) or greater. Structural metalpanel roof systems can support structural loads withoutbeing applied over separate roof decks. Architecturalmetal panel roof systems are applied over structuralroof decks that resists structural loads.Information on metal panel roof systems, bothstructural metal panels and architectural metal panels,is contained in the guide. Specific information inincluded is as follows:1. Company name2. Product name3. Architectural/structural applications4. Panel configuration5. System requirements6. Panel profile7. Seam processing, height and sealant8. Fastening method9. Specialty applications10. Manufacturer and product data32

11. ASTM E 331 water penetration12. ASTM E 1646 water penetration13. ASTM E 283 air infiltration14. ASTM E 1680 air infiltration15. FM/UL wind uplift ratingsUsers of the guide who are interested in additionalinformation regarding metal panel roof systems areencouraged to refer to The NRCA Metal <strong>Roofing</strong>Manual or The NRCA <strong>Roofing</strong> and WaterproofingManual, Fourth Edition.33

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCAEP-SPAN 278P O Box 150449Dallas, TX 75315214/827-1746FAX: 214/828-1394E-mail:Web: www.aep-span.comALCO-NVC, INC.P O Box 14001Detroit, MI 48214800/323-0029FAX: 313/331-4726E-mail: alconvc@aol.comWeb: www.alconvc.comALDO PRODUCTS CO., INC. 2581604 N. Main StreetKannapolis, NC 28081704/932-3054FAX: 704/932-3041E-mail: aldocoat@aol.comWeb:ALLIEDSIGNAL ROOFING SYSTEMS 48 84 6742000 Regency Parkway, Suite 225 140Cary, NC 27511-8507 184919/461-0670 (NC) 800/221-6490FAX: 919/461-4720E-mail: alliedroof@alliedsignal.comWeb: www.alliedroof.comAMERICAN BUILDING ROOFING 281& ARCHITECTURAL PRODUCTSP O Box 800Eufaula, AL 36072334/687-2032FAX: 334/68700298E-mail: info@americanbuildings.comAMERICAN LUBRICANTS CO. 841227 Deeds Avenue 124Dayton, OH 45401937/222-2851FAX: 937/461-7729E-mail:Web:AMERICAN STEEL BUILDING CO. 283P O Box 14244Houston, TX 77221713/433-5661FAX: 713/433-0847E-mail:Web:ANDEK CORP. 258 674P O Box 392850 Glen AvenueMoorestown, NJ 08057888/88ANDEKFAX: 888/44ANDEKE-mail:34

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCARS INDUSTRIES 2849606 Parkway East, Suite EBirmingham, AL 32515205/836-6777FAX: 205/836-4090E-mail:Web:ATAS INTERNATIONAL, INC. 285Iron Run Industrial Park6612 Snowdrift RoadAllentown, PA 18106610/395-8445FAX: 610/395-9342E-mail: info@atas.comBARRETT COMPANY 49 6743422 Old Capitol TrailWilmington, DE 19808800/647-0100FAX:E-mail:Web:BERRIDGE MANUFACTURING CO. 288Roof DivisionHouston, TX 77026713/223-4971FAX: 713/433-0847E-mail: sales@berridge.comWeb: www.berridge.comBITEC INC. 85#2 Industrial Park Dr. 124Morrilton, AR 72110 141800/535-8597 185FAX 501/354-3019E-mail: dga@bitec.comWeb: www.bi-tec.comBONDCOTE ROOFING SYSTEMS 244984 Southford Road 250Middlebury, CT 06762800/368-2160FAX:E-mail:Web:BURKE INDUSTRIES 2342250 South 10th St. 236San Jose, Ca 95112408/297-3500 800/297-7010FAX 408/280-0938E-mail:Web:BUTLER MANUFACTURING CO. 291BMA TowerPenn Valley ParkKansas City, MO 64141816/968-2370FAX 816/968-2371E-mail:35

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCCARLISLE SYNTEC INCORPORATED 218 244P.O. Box 7000 228 251Carlisle, PA 17013717/245-7000FAX 717/245-7245CELOTEX CORP. 51 87 219 6754010 Boy Scout Blvd. 125 228Tampa, FL 33607 186813/873-1700FAX: 813/873-4080E-mail: aharrington@celotex.comWeb:CERTAINTEED 54 87ROOFING PRODUCTS GROUP 125750 E. Swedesford Rd 144P O Box 860 187Valley Forge, PA 19482800/359-7298 FAX: 610/341-7055Web: www.certainteed.comCONKLIN CO. 234 259P.O. Box 155 236Shakopee, MN 55379-0155800/888-8838FAX 612/496-4285E-mail: marketing@conklin. comWeb: www.conklin.comCOOLEY ENGINEERED 245MEMBRANE INC. 25150 Esten Avenue Box 939Pawtucket, RI 02862-0939401/724-0490FAX: 401/726-8731E-mail: cooleygroup.comCURVELINE INC. 293P.O. Box 4268Ontario, CA 91761909/947-6022FAX 909/947-1510E-mail: curveline@cyberg8t.comWeb: www.met.tile/com/curvelineDANOSA CARIBBEAN INC. 89 675Box 13757, Santurce Station 147San Juan, PR 00908 189809/785-4545FAX 809/787-3902E-mail: danosapr@icepr.comWeb:DERMABIT, WATERPROOFING 91INDUSTRIES INC. 127P. O Box 273 148Alexandria, VA 22313-0273703/739-2801FAX 703/739-2802E-mail:36

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCDIBITEN 206P.O. Box 5108 127Denver, CO 80217-5108 189800/342-4836FAX 303/978-3904E-mail:Web:DOW CORNING CORPORATION 260P.O. Box 994Midland, MI 48686-0994517/496-6000FAX 517/496-8026E-mail:Web:DURADEK U.S., LTD. 2061722 Iron Street 212North Kansas City, MO 84116800/338-3568FAX: 816/421-2924E-mail: duradek@kcnet.comWeb:DURO-LAST INC. 245525 Morley Drive 252Saginaw, MI 48601800/248-0280 (All U.S.)FAX 800/432-9331Ej-mail:Web:ECOLOGY ROOF SYSTEMS 56 91 245505 N. Tustin Avenue #188 127 252Santa Ana, CA 92705 149714/972-1001 190FAX: 714/972-1079E-mail:Web: www.ecologyroofystems.comENGLERT INC. 2941200 Amboy Ave.Perth Amboy, NJ 08862732/826-8614FAX 732/826-8865E-mail:Web:ERSYSTEMS 220 245 260Elastomeric <strong>Roofing</strong> Systems, Inc. 229 252 27650 Medina StreetLoretto, MN 55357-0056612/479-6690 FAX: 612/479-6691E-mail: ersinfo@ersystems.comWeb: www.ersystems.comFABRAL 2953449 Hempland RoadLancaster, PA 17601717/397-2741FAX 717/397-1040E-mail: fabinf@fabral.comWeb:37

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCFIELDS COMPANY, LLC 582240 Taylor WayTacoma, WA 98421253/627-4098FAX 253/383-2181E-mail:Web:FIRESTONE BUILDING 61 93 206 221 240PRODUCTS CO. 128 212 229 242525 Congressional Blvd. 151Carmel, IN 46032 191800/428-4442E-mail: firestonebpco.comWeb:FLEX MEMBRANE INTERNATIONAL, 206 245INC. 212 253Bethelem DriveMorgantown, PA 19543610/286-7788FAX 610/286-7786E-mail flexroof@compuserve.comFOLLANSBEE STEEL 297P.O. Box 610Follansbee, WV 26037800/624-6906FAX 304/527-1269E-mail: folrfg@lbcorp.comWeb:GAF MATERIALS CORP. 62 95 207 2401361 Alps Road 129 212 242Wayne, NJ 07470 153973/628-3000 192800/766-3411FAX: 973/628-3451Web: www.gaf.comGACO WESTERN, INC. 261P.O. Box 88698 276Seattle, WA 98138-2698800/456-4226FAX 206/575-0587E-mail:Web:GALVAMET, INC. 2982267 Via Burton StreetAnaheim, CA 92806714/758-4848FAX 714/758-4855E-mail: jgeortner@galvamet.comWeb:GARDNER ASPHALT CORP./APOC 265DIVISIONP.O. Box 5449Tampa, FL 33675-5449FAX 813/248-6768E-mail:Web:38

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCGARLAND COMPANY INC. 299 6753800 E. 91st StreetCleveland, OH 44105216/641-7500FAX 216/641-0633E-mail:Web:G. E. SILICONES 265division of GENERAL ELECTRIC260 Hudson River Rd. Bldg. 25-73Waterford, NY 12188518/237-3330FAX 518/233-3931E-mail:GENFLEX ROOFING SYSTEMS 208 222 240 2461722 Indian Wood Circle 213 230 243 253Maumee, OH 43537800/448-4272FAX: 419/891-4436E-mail:Web: www.genflex.comGRACE & CO., W.R. 67662 Whittemore AvenueCambridge, MA 02140617/876-1400E-mail:Web:GS ROOFING PRODUCTSCO. INC.See: Certainteed CorporationHENRY COMPANY 652911 Slauson AvenueHuntington Park, CA 90255213/583-5000FAX 213/582-6429E-mail:Web:HICKMAN SYSTEMS INC., W.P. 82 235 67630700 Solon Industrial Parkway 237Solon, OH 44139440/248-7760FAX 440/248-6524E-mail: wphickman@wphickman.comWeb:IB ROOF SYSTEMS 2092877 Chad Drive-B 214Eugene, OR 97408541/242-2871FAX: 541/302-6692E-mail: solution@ibroof.comWeb:39

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCICA, INC. 98P.O. Box 679 129Warrington, PA 18976 194215/918-0889FAX 215/918-0890E-mail: hedges1@aol.comWeb:IKO INDUSTRIES 98120 Hay Rd. 131 675Wilmington, DE 19809 156302/764-3100 194FAX 302/764-5852E-mail:Web:IMPER ITALIA S.P.A. 675Strada Lanzo 13110148 Torino, ITALY11-262-0941FAX 11-262-1621E-mail:Web:INNOVATIVE METALS CO., INC. 2992070 Steel DriveTucker, GA 30084770/908-1030FAX 770/908-2264E-mail:Web:INTEC/PERMAGLAS 66P.O. Box 2845Port Arthur, TX 77643800/231-4631FAX 409/724-2348E-mail: support@usintec.comWeb:INTERCONTINENTAL COATINGS 246CORP, (I-CON) 25416744 W. Park Circle DriveChagrin Falls, OH 44023440/543-3114FAX: 440/543-3443E-mail:INTERNATIONAL DIAMOND 222SYSTEMS INC. 230P.O. Box 351950Toledo, OH 43635419/382-0111FAX 419/382-3275E-mail:IPS Insulated Panel Systems 301P . O. Box 968Stafford, TX 77497-0968281/499-2605FAX 281/499-3363E-mail:Web:40

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCJOHNS MANVILLE INT'L, INC. 67 101 209 223<strong>Roofing</strong> Systems Group 131 215 230P.O. Box 5108 159Denver, CO 80217 195303/978-2000FAX 303/978-3904E-mail:KARNAK CORPORATION 68330 Central AvenueClark, NJ 07066732/388-0300 800/526-4236FAX 732/388-9422E-mail:Web: www.karnakcorp.comKOPPERS INDUSTRIES INC. 69 675436 Seventh AvenuePittsburgh, PA 15219800/558-2706FAX: 412/227-2002E-mailWeb: www.koppers.comMALARKEY ROOFING CO. 70 103P.O. Box 17217 132Portland, OR 97217-0217 162503/283-1191 OR 800/545-1191 196FAX:E-mail:Web:MBCI/NCI 301P.O. Box 38217Houston, TX 77238281/445-8555FAX 281/445-1791E-mail www.mbci.comWeb:MBTECHNOLOGY CORPORATION 675188 South Teilman AveFresno, CA 93706800/621-9281FAX 209/233-4607E-mail:Web:MCELROY METAL CO. 3081500 Hamilton RoadBossier City, LA 71111318/747-8000FAX 318/747-8029E-mail:Web:MERCHANT & EVANS INC. 308100 Connecticut DriveBurlington, NJ 08016609/387-3033FAX 609/387-4838E-mailWeb:41

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCMETAL SALES MFG CORP 3107800 State Rd. 60Sellersburg, IN 47172812/246-0819FAX 812/246-0829E-mail: pserv@aye.netWeb: www.mtlsales.comMFM BUILDING PRODUCTS CORP. 77P.O. Box 340520 Orange St.Coshocton, OH 438127404/622-2645 800/882-7663E-mail: mfm@coshocton.comWeb:MONSEY BAKOR 105336 Cold Stream Road 163Kimberton, PA 19442 199800/523-0268FAX 610/933-4598E-mail: monsey-bakor.comWeb:MULE HIDE PRODUCTS CO., INC. 209 224 2342924 Wyetta Drive 215 231 236Beloit, WI 53511608/365-3111FAX:E-mail:Web:NATIONAL COATINGS CORP. 2651201 Calle Suerte 276Camarillo, CA 93012805/388-7112FAX 805/388-8140E-mail: nationalcoatings.comWeb:NEOGARD, DIV JONES BLAIR 2656900 Maple Avenue P.O. Box 35288Dallas, TX 75235800/321-6588FAX 214/357-7532E-mail: neogard@neogard.orgWeb:NORTH CAROLINA FOAM IND. 2771515 Carter St. P.O. Box 1528Mount Airy, NC 27030336/789-9161FAX 336/789-9586E-mail:Web site: www.ncfi.comOLYMPIC RUBBER ROOFING 224SYSTEMS INC. 231P.O. Box 091082Milwaukee, WI 53209800/552-5393 414/442-3117FAX:E-mail:42

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCPERFORMANCE ROOF SYSTEMS 109 6764821 Chelsea Ave. 133Kansas City, MO 64130 200816/921-0221FAX 816/921-5540E-mail: prshunt@aol.comWeb:PETERSEN ALUMINUM 3111005 Tonne Rd.Elk Grove Village, IL 60007800/323-1960FAX 800/722-7150E-mail:www.pac-clad.comPLASTIC COATINGS CORP. 267P.O. Box 1068St. Albans, WV 25177304/755-9151FAX 304/755-0229E-mail:Web:POLYDYNE 267260 Grell LaneJohnson Creek, WI 53038800/225-7659FAX 414/648-5647E-mail:Web:POLYGLASS USA 108 676150 Lyon Drive 135Fernley, NV 89408 166702/575-6007 201FAX 702/575-2314E-mail: otto@polyglass.comWeb:POLYTHANE SYSTEMS, INC. 269P.O. Box 1452 277Spring, TX 77383-6450281/350-9000FAX 281/288-6450E-mail: ridgestock@aol.comWeb:PROTECTIVE COATINGS INC. 2251620 Birchwood Avenue 231Fort Wayne, IN 46803800/992-8299FAX: 219/422-7147E-mail:Web:QUANTUM COATING 2699200 Latty AvenueSt. Louis, MO 63042800/624-4995FAX: 314/524-6522E-mail:Web:43

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCROOFING PRODUCTS 226INTERNATIONAL 23257460 Dewitt St.Elkhart, IN 46517800/628-2957 219/293-9096FAX 219/294-3450E-mail:Web: www.roofingproductsint.comREPUBLIC POWDERED METALS 2383735 Green Road 293Beachwood, OH 44122800/551-7081FAX: 888/742-1759E-mail:Web:SARNAFIL INC. 210100 Dan Road 216Canton, MA 02021800/451-2504FAX:E-mail:Web:SEAMAN CORPORATION 247FiberTite <strong>Roofing</strong> Systems 2561000 Venture Blvd.Wooster, OH 44691800/927-8578FAX: 800/649-2737E-mail:SIPLAST INC. 111111 Hwy. 67 South 167Arkadelphia, AR 71923 202870/246-8094FAX:E-mail: kersey@siplast.comWeb:SOPREMA, INC. 113310 Quadral Drive 171Wadsworth, OH 44281330/334-0066 800/356-3521FAX 330/334-4289E-mail:Web:SOUTHWESTERN PETROLEUM 78CORPORATION (SWEPCO)534 No. Main St. P.O. Box 961005Fort Worth, TX 76161-0005817/332-2336 800/877-9372FAX 817/877-4047E-mail: swepcousa.comSTEELOX ROOF SYSTEMS 313P.O. Box 8181Mason, OH 45040-8181513/573-5200FAX 513/573-5511E-mail:Web:44

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCSTEVENS ROOFING SYSTEMS 235 241J.P.S. Elastomerics Corp. 237 2439 Sullivan RoadHolyoke, MA 01040-2800800/621-ROOFFAX 413/552-1198E-mail: info@stvroof.comSWD URETHANE COMPANY 271222 South Date St. 277Mesa, AZ 85210480/969-8413 800/828-1394FAX 480/461-6926E-mail: whip@swdurethane.comWeb: www.swdurethane.comTAMKO ROOFING PRODUCTS, INC. 117220 West 4th Street PO Box 1404 137Joplin, MO 64802 179417/624-6644 202FAX 417/624-8935E-mail:Web: www.tamko.comTEXAS REFINERY CORP. 119One Refinery Place P.O. Box 711 138Ft. Worth, TX 76101 204817/332-1161FAX 817/332-2340E-mailWeb: www.texasrefinery.comTEXSA, S.A. 119Poligono Can Pelegri 138San Andreu de la Barca, Spain 18134-3-6820770 204FAX 34-3-6820752E-mail:Web:TREMCO INC. 79 119 235 2383735 Green Rd. 181 237 239P.O. Box 228069Beachwood, OH 44122-8069216/292-5000FAX: 216/766-5629Web: www.tremcoroofing.comTRI-PLY 80P.O. Box 2685Port Arthur, TX 77643800/331-3007FAX 409/727-0771E-mail:Web:UCSC, LTD. 2721208 N. Grand 277Roswell, NM 88201505/623-9726FAX 505/623-1908E-mail: ucscurethane.comWeb:45

EPDM<strong>Index</strong> to Roof CoveringsSPRAY POLYURETHANEFOAM-BASED SYSTEMOTHER PRE-FABRICATEDTPOMODIFIED BITUMENBUILT-UP ROOFINGMETAL ROOF PANELSWARRANTIESINCOMPLETECSPE/PIBPVCUNIFLEX, INDUSTRIAL DIV. OFKOOL SEAL, INC.1499 Enterprise ParkwayTwinsburg, OH 44087216/425-4717FAX 216/425-9778E-mail:Web:UNIROOF CORPORATION 676P.O. Box 160133Altamonte Springs, FL 32716-0133407/869-5110FAX:E-mail:Web:UNITED COATINGS 27319011 E CataldoGreenacres, WA 99016509/926-7143FAX 509/928-1116E-mail:Web:UNITED STEEL DECK INC. 314475 Springfield AvenueP.O. Box 662Summit, NJ 07902-0662908/277-1617FAX 908/277-1619E-mail: heagler@ix.netcom.comU.S. INTEC INC. 120P.O. Box 2845 139Port Arthur, TX 77643 182800/624-6832 (Tech Hotline)800/231-4631 (US)800/392-4216 (TX)E-mail:VERSICO INCORPORATED 227 2483485 Fortuna Drive 232 257Akron, OH 44312216/644-6700 800/992-7663FAX 216/644-2613E-mail:Web:VINCENT METAL GOODS 316P.O. Box 360Minneapolis, MN 55440612/717-9000FAX 612/717-7122E-mail:Web:W P HICKMAN SYSTEMS INC. 82 235 67630700 Solon Industrial Parkway 237Solon, OH 44139440/248-7760FAX 440/248-6524E-mail: wphickman@wphickman.comWeb:46

THIS PAGE LEFT BLANK INTENTIONALLY

Built-up <strong>Roofing</strong>ALLIEDSIGNAL1. NUMBER OF REGIONAL SERVICE LOCATIONS: 62. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS, DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE ALLIEDSIGNAL COMM. ROOFING SYSTEMS MANUAL6. FOR SALES/TECHNICAL INFORMATION: 800/221–64907. FELTS DATA: TRADE NAME (applicable ASTM standard), BLACK ARMOR TARRED FELT (D 227)(metric [39 5/8-in. wide])BLACK ARMOR GLASS FIBER FELT (D 2178, TYPE IV)BLACK ARMOR PREM. GLASS FIBER FELT (D 2178, TYPE VI)BLACK ARMOR COAL TAR COATED GLASS FIBER (D 4990)BLACK ARMOR PREMIUM COAL TAR COATED GLASSFIBER FELTPOLYMOP MODIFIED ASPHALTPOLYMOP GLASS FIBER BASE SHEETPOLYMOP GLASS FIBER FELT8. SPECIFICATION NUMBER RP-40 RP-41 RP-40-5 RP-41-5 RP-60 RP-61 RP-60-5 RP-61-5 RP-50- RP-51- PM-50TCTC9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X X X XInsulated X X X X XNonnailable X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 1/2 0 – 1/2 0 – 1/2 0 – 1/2 0 – 1/8 0 – 1/8 0 – 1/8 0 – 1/8 1/4 1/4 1/4 - 3NUMBER OF PLIES12A. Total Plies 4 4 5 5 4 4 5 5 4 4 412B. Base Sheet 1 1 1 1 1 112C. Interply(ies) 3 4 4 5 3 4 4 5 3 4 312D. Cap Sheet13. TYPES OF FELTGlass Fiber X X X X X X XOrganic X X X X X X X XAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphaltModifed AsphaltXCoal Tar X X X X X X X X X XElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap SheetOther X X X X X X X X16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.0 6.0 6.5 6.5 6.0 6.0 6.5 6.5 6.0 6.0 6.0SmoothCap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1987 1987 1987 1987 1991 1991 1991 1991 199819. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED X X X X X X X X X X48

Built-up <strong>Roofing</strong>BARRETT COMPANY, THE3YESDISTRIBUTORS, DIRECTYESSEE BARRETT MANUALSALES OFFICEPOLY-FELT 165 VP POLYESTER ASTM (NONE) D-5665-97A, TYPE II, (metric)POLY-FELT 265 VP POLYESTER ASTM (NONE) D-5665-97A, TYPE II, (metric)RAM-GLASSPLY IV (D 2178, TYPE IV)RAM-GLASS VI (D 2178, TYPE VI)RAM BASE PLY NO. 32 GLASS (D 4601, TYPE II)RAM-BASE PLY NO. 30 POLYESTER ASTM D-5665-97-A, TYPE IV (metric)RAM-FLASH 327HDR NEOPRENE (NONE)RAM HYPALON FLASHING (NONE)RAM 306, RAM 309 (D 5147)PM-51 PM-50 PM-51 PM-50 PM-51 KLB KLB KLB KLB KLB KLB KLB KLB KLB KLB KLB KLB KLBPM PM PM-5 PM-5 100-1PG 100-2PG 100-3PG 100-4PG 100-1P 100-2P 100-3P 100-4P 100-2F 100-3F 100-4F 100-2M 100-3MHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X X X X X X X X XX X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X1/4 - 3 1/4 - 3 1/4 - 3 1/4 - 3 1/4 - 3 0 – 3 0 – 3 0 – 6 0 – 6 0 – 6 0 – 3 0 – 6 0 – 6 0 – 3 0 – 6 0 – 6 0 – 3 0 – 34 3 4 5 5 1 2 3 4 1 2 3 4 2 3 4 2 31 14 4 4 4 5 1 2 3 4 1 2 3 4 2 3 4 2 3X X X X X X X X X X X X X XX X X X X X X X X XX X X X XX X X X X X X X X X X X X4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 43 3 3 3 3 3 3 3 3 3 3 3 3 3 3 310 10 10 10 10 10 10 10 10 10 10X X X X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X X6.0 6.0 6.0 6.5 6.5 4.0 4.25 4.50 4.0 4.25 4.50 4.15 4.50 4.85 4.10 4.450.70 1.0 1.25 1.50 0.75 1.0 1.25 1.50 1.15 1.50 1.85 1.10 1.451.40 1.85 2.10 2.35 1.60 1.85 2.10 2.35 2.0 2.35 2.70 1.95 2.30NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1998 1998 1998 1998 1998 1984 1984 1984 1985 1985 1984 1984 1982 1982 1983 1983 1984 1984> 200 > 200 > 200 > 200 > 200 > 200 > 200> 200 > 200 > 200 > 200 > 200 > 200 > 200X X X X X X X X X X X X X49

Built-up <strong>Roofing</strong>BARRETT COMPANY, THE1. NUMBER OF REGIONAL SERVICE LOCATIONS: 32. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS, DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE BARRETT MANUAL6. FOR SALES/TECHNICAL INFORMATION: SALES OFFICE7. FELTS DATA: TRADE NAME (applicable ASTM standard), POLY-FELT 165 VP POLYESTER ASTM (NONE) D 5665-97A, TYPE II (metric)(metric [39 5/8-in. wide])POLY-FELT 265 VP POLYESTER ASTM (NONE) D 5665-97A, TYPE II (metric)RAM-GLASSPLY IV (D 2178, TYPE IV)RAM-GLASS VI (D 2178, TYPE VI)RAM BASE PLY NO. 32 GLASS (D 4601, TYPE II)RAM-BASE PLY NO. 30 POLYESTER ASTM D 5665-97A, TYPE IV, (metric)RAM-FLASH 327HDR NEOPRENE (NONE)RAM HYPALON FLASHING (NONE)RAM 306, RAM 309 (D 5147)8. SPECIFICATION NUMBER KLB K312 K312 K312 K312 K312 K312 T-3. T-3. T-3. T-3.100-4M 2F 3F 4F 2P 3P 4P 1P 2P 3P 4P9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X X X X X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 1 – 6 1/8 – 6 1/8 – 6 1/8 – 6NUMBER OF PLIES12A. Total Plies 4 2 3 4 2 3 4 1 2 3 412B. Base Sheet12C. Interply(ies) 4 2 3 4 2 3 4 1 2 3 412D. Cap Sheet13. TYPES OF FELTGlass Fiber X X X XOrganicAsbestosPolyester X X X X X X X XOther14. INTERPLY ADHESIVEAsphalt X X X XModifed AsphaltCoal TarElastomeric Adhesive X X X X X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 ) 10 10 10 10 10 10 10 10 10 1015B. SURFACING - SMOOTHAsphalt X X X XCoal TarEmulsion/Cutback X X X X X X X X X X XAluminum Coating X X X X X X X X X X XVinvl/Vinyl Coating X X X X X X X X X X X15C. SURFACING - OTHERMineral Granules X X X X X X X X X X XCap Sheet X X X X X X X X X X XOther X X X X X X X X X X X16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 4.80 4.15 4.50 4.90 4.0 4.25 4.50 4.25 4.50 4.50Smooth 1.80 1.15 1.50 1.90 1.0 1.25 1.50 0.75 1.25 1.50 1.50Cap Sheet 2.65 2.0 2.35 2.75 1.85 2.10 2.35 1.60 2.10 2.35 2.3517. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1984 1985 1985 1985 1985 1985 1985 1985 1983 1985 198319. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD > 200 > 200 > 200 > 200 > 200 > 200 > 200-XD > 200 > 200 > 200 > 200 > 200 > 200 > 200B Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED X X X X X X X X X X X50

Built-up <strong>Roofing</strong>CELOTEX CORP.7YESDISTRIBUTORS, DIRECTYESSEE CELOTEX BUR & MB RFG SYS MANUALREGIONAL OFFICES, SALES/A. HARRINGTON, TECH.CELO-GLASS IV (D 2178, TYPE IV)CELO-GLASS AGS (D 2178, TYPE VI)VAPORBAR GB (D 4601, TYPE II)CHANNEL VENT GB (D 4897, TYPE II)VAPORBAR BASE SHEET (D 2626)HYDRO-STOP VAPOR BARRIER/VENTING BASE SHEET (NONE)CP-50 CP-50 CP-80 CP-80 CP-80 G/A-4- AGS-4- G/A-4- AGS-4- G/A-3- G/A-3- G/A-4- AGS-4- G/A-4- AGS-4- G/A-4- AGS-4- G/A-4-3P 2P 2P 3P 3 G.BS W-G W-G F-G F-G W-G C-G W-S W-S F-S F-S C-S C-S C-GCOLD COLD COLD COLD COLD HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X X1/8 – 6 1/8 – 6 1/8 – 6 1/8 – 6 1/8 – 6 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 33 2 2 3 3 4 4 4 4 3 3 4 4 4 4 4 4 41 1 1 1 1 1 1 1 13 2 2 3 3 3 3 3 3 2 3 3 3 3 3 4 4 4X X X X X X X X X X X X X XX X X XX X X X X X X X X X X X X X XX X X4 4 4 4 4 4 4 4 4 4 4 43 3 3 3 3 3 3 3 3 3 3 310 10 10 10 10X X X X X X X X X X XX X X X X X X X X XX X X X X X X X X X XX X X X XX X X X XX X X X X4.50 4.15 4.15 4.50 6.0 5.80 5.80 5.60 5.60 5.60 5.60 5.801.50 1.15 1.15 1.50 2.0 1.50 1.50 1.60 1.60 1.70 1.702.35 2.00 2.00 2.35 2.85NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1978 1978 1985 1985 1978 1980 1980 1980 1980 1980 1962 1980 1980 1980 1980 1962 1962 1983> 200 > 200 > 200 X X X X X X X X X X X X X> 200 > 200 > 200 X X X X X X X X X X X X XX X X X X X X X X X51

Built-up <strong>Roofing</strong>CELOTEX CORP.1. NUMBER OF REGIONAL SERVICE LOCATIONS: 72. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS, DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE CELOTEX BUR & MB RFG SYS MANUAL6. FOR SALES/TECHNICAL INFORMATION: REGIONAL OFFICES, SALES/A. HARRINGTON, TECH.7. FELTS DATA: TRADE NAME (applicable ASTM standard), CELO-GLASS IV (D 2178, TYPE IV)(metric [39 5/8-in. wide])CELO-GLASS AGS (D 2178, TYPE VI)VAPORBAR GB (D 4601, TYPE II)CHANNEL VENT GB (D 4897, TYPE II)VAPORBAR BASE SHEET (D 2626)HYDRO-STOP VAPOR BARRIER/VENTING BASE SHEET (NONE)8. SPECIFICATION NUMBER AGS-4- G/A-3- G/A-3- G/A-4- AGS-4- G/A-4- AGS-4- G/A-4- AGS-4- G/A-H+ AGS-H+C-G W-S W-M W-M W-M F-M F-M C-M C-M 3-W-G 3-W-G9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X X X XInsulated X X X X XNonnailable X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 3 0 – 3NUMBER OF PLIES12A. Total Plies 4 3 3 4 4 4 4 4 4 4 412B. Base Sheet 1 1 1 1 1 1 1 1 1 112C. Interply(ies) 4 2 1 2 2 2 2 2 2 2 212D. Cap Sheet 1 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther X X14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed AsphaltCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/Cutback X X X XAluminum Coating X XVinvl/Vinyl Coating X X X X15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 5.80Smooth 1.70 1.70Cap Sheet 0.90 1.30 1.30 1.20 1.20 1.30 1.30 1.20 1.2017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE W W W W W W W W NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1983 1980 1983 1980 1980 198019. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD X X X X X X X X X X X-XD X X X X X X X X X X XB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED X X X X X X52

Built-up <strong>Roofing</strong>AGS-H+ G/A-H+ AGS-H+ G/A-H+ AGS-H+ G/A-H+ AGS-5- G/A-5- AGS-5- G/A-5- AGS-5- G/A-5-4-W-M 4-W-M 3-W-M 3-W-M 3-W-S 3-W-S W-M W-M F-M F-M C-M C-MHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X XX X X XX X0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 9 0 – 95 5 4 4 4 4 5 5 5 5 5 51 1 1 1 1 1 1 1 1 13 3 2 2 3 3 3 3 3 3 4 41 1 1 1 1 1 1 1 1 1X X X X X X X X X X X XX X X X X XX X X X X XXXXXXXX X X X X X X X X X53

Built-up <strong>Roofing</strong>CERTAINTEED ROOFING PRODUCTS GROUP1. NUMBER OF REGIONAL SERVICE LOCATIONS: 22. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE COMMERCIAL ROOFING SYSTEMS MANUAL6. FOR SALES/TECHNICAL INFORMATION: COMMERCIAL ROOFING DEPT/REGION OFFICE7. FELTS DATA: TRADE NAME (applicable ASTM standard), FLINTGLAS MS CAP SHEET (D 3909)(metric [39 5/8-in. wide]) GLASBASE BASE SHEET (D 4601, TYPE I)FLINTGLAS PLY SHEET TYPE VI (D 2178, TYPE VI)FLINTGLAS PLY SHEET TYPE IV (D 2178, TYPE IV)YOSEMITE MS BUFFER SHEET (D 249)ALL WEATHER EMPIRE BASE SHEET (D 2626)NO.15 PERFORATED FELT (D 226, TYPE I)FLEXIGLAS PREMIUM CAP 960 (D 3909)FLEXIGLAS BASE SHEET (D 4601, TYPE II)8. SPECIFICATION NUMBER G-C-04 G-N-04 G-C-B4 G-N-B4 G-C-P4 G-C-B3 G-N-B3 G-C-P3 M-C-04 M-N-04 M-C-B49. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT/CA10. DECK TYPENailable X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 6 0 – 6 0 – 6NUMBER OF PLIES12A. Total Plies 4 4 4 4 4 3 3 3 4 4 412B. Base Sheet 1 1 1 1 1 1 1 1 112C. Interply(ies) 3 3 3 3 4 2 2 3 2 2 212D. Cap Sheet 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X XOrganic X X X XAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed AsphaltCoal TarElastomeric AdhesiveX15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.0 6.0 6.0 6.0 6.0 5.70 5.50 5.60SmoothCap Sheet 2.40 2.30 2.3017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE19. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED54

Built-up <strong>Roofing</strong>M-N-B4 M-C-B3 M-N-B3 M-C-B5 M-N-B5 SR-C-B3 SR-N-B3 S-C-B4 S-N-B4 S-C-B3 S-N-B3HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CA HOT/CAX X X X X XX X X X X X X X X X XX X X X X0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 64 3 3 5 5 3 3 4 4 3 31 1 1 1 1 1 1 1 1 1 12 1 1 3 3 2 2 3 3 2 21 1 1 1 1X X X X X X X X X X XXX X X X X X X X X X XX X X X X X X X X X XX X X X X XX X X X X2.10 1.80 1.70 2.40 2.211.90 1.70 1.80 1.60 1.50 1.30NONE 1 1 NONE NONE 1&2 1&2 NONE NONE NONE NONE55

Built-up <strong>Roofing</strong>ECOLOGY ROOF SYSTEMS1. NUMBER OF REGIONAL SERVICE LOCATIONS: 62. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE ECOLOGY ROOF SYSTEMS COMMERCIAL ROOFING SYSTEMS MANUAL6. FOR SALES/TECHNICAL INFORMATION: 800/535-3833 EXT. 147. FELTS DATA: TRADE NAME (applicable ASTM standard), ERS #400 PLY SHEET (D2178, TYPE IV)(metric [39 5/8-in. wide])ERS #400-6 PLYI SHHET (D2178, TYPE VI)ERS #401 BASE SHEET (D4601, TYPE II)ERS #402ERS #403 VENTED BASE SHEET (D4601, TYPE II)8. SPECIFICATION NUMBER 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3 1000-3IN-M IN-C IN-G ND-M ND-C ND-G CON-M COC-C CON-G LWT-M LWT-C9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X X XInsulated X X X X X XNonnailable11. SLOPE REQUIREMENTS (range in inches) 0 - 1 0 - 1 0 - 1 0 - 1 0 - 1 0 - 1 0 - 2 0 - 2 0 - 2 0 - 2 0 - 2NUMBER OF PLIES12A. Total Plies 3 3 3 3 3 3 3 3 3 3 312B. Base Sheet 1 1 1 1 1 1 1 1 1 1 112C. Interply(ies) 2 2 2 2 2 2 2 2 2 2 212D. Cap Sheet13. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap SheetOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7SmoothCap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 198819. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED56

Built-up <strong>Roofing</strong>1000-3 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4 1000-4LWT-G IN-M IN-C IN-G ND-M ND-C ND-G CON-M CON-C CON-G LWT-M LWT-C LWT-GHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X XX X X X X X0 - 2 0 - 1 0 - 1 0 - 1 0 - 1 0 - 1 0 - 1 0 - 2 0 - 2 0 - 2 0 - 2 0 - 2 0 - 23 4 4 4 4 4 4 4 4 4 4 4 41 1 1 1 1 1 1 1 1 1 1 1 12 3 3 3 3 3 3 3 3 3 3 3 3X X X X X X X X X X X X XX X X X X X X X X X X X XX X X X X X X X X X X X X4 4 4 4 4 4 4 4 4 4 4 4 43 3 3 3 3 3 3 3 3 3 3 3 35.7 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 198857

Built-up <strong>Roofing</strong>FIELDS COMPANY, LLC1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE FIELDS BUR MANUAL6. FOR SALES/TECHNICAL INFORMATION: T. VANDERLINDA 800/627-40987. FELTS DATA: TRADE NAME (applicable ASTM standard), FIELDS F50 POLYSHIELD (D 4601, D 2178) FIELDS P79 POLYTEX 2(metric [39 5/8-in. wide]) FIELDS F52 GLASBASE 2 (D 4601) FIELDS P72 POLYROOF 2FIELDS F54 GLASPLY4 (D 2178, TYPE IV) FIELDS P74 POLYWEBFIELDS F55 POLYSHIELD 2 (D 4601, D 2178) FIELDS P75 POLYWEBFIELDS F56 GLASPLY6 (D 2178, TYPE VI) FIELDS P76 POLYWEBFIELDS F58 GLASCAP (D 3609)FIELDS P77 POLYTEXFIELDS M60 RUBRPOLY (D 4601, D 2178) FIELDS P78 POLYTEXFIELDS M62 RUBRGLAS (D4601, D 2178) FIELDS G360 GLASWEBFIELDS M64 RUBRPOLY2 (D 4601, D 2178) FIELDS G362 GLASWEBFIELDS M66 RUBRGLAS2 (D 4601, D 2178) FIELDS G60 GLASWEBFIELDS M68 RUBRCAP (D 5147)FIELDS G62 GLASWEBFIELDS P70 POLYROOF8. SPECIFICATION NUMBER HAW-315-MC HAW-325-MC HAW-335-MC HAC-315-MC HAC-325-MC HAC-335-MC HAI-X25-MC HAI-X35-MC HAI-X45-MC HAI-315-MC HAI-325-MCHAW-317-MC HAW-327-MC HAW-337-MC HAC-317-MC HAC-327-MC HAC-337-MC HAI-X27-MC HAI-X37-MC HAI-X47-MC HAI-317-MC HAI-327-MC9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X XInsulated X X X X XNonnailable X X X11. 11. SLOPE REQUIREMENTS (range in inches) 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3NUMBER OF PLIES12A. Total Plies 3 4 5 3 4 5 3 4 5 3 412B. Base Sheet 1 1 1 1 1 1 1 112C. Interply(ies) 1 2 3 1 2 3 2 3 4 1 212D. Cap Sheet 1 1 1 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed AsphaltCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmoothCap Sheet 1.60 2.0 2.30 1.80 2.20 2.50 1.70 2.10 2.45 1.45 1.8517. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 198819. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED58

Built-up <strong>Roofing</strong>HAI-335-MC HAW-325-RM HAW-335-RM HAW-345-RM HAC-325-RM HAC-335-RC HAC-345-RM HAI-X35-RM HAI-X45-RM HAI-325-RM HAI-335-RM HAI-345-RM HAW-335-RC HAW-345-RC HAC-335-RC HAC-345-RC HAI-X35-RC HAI-X45-RCHAI-337-MC HAW-327-RM HAW-337-RM HAW-347-RM HAC-327-RM HAC-337-RC HAC-347-RM HAI-X37-RM HAI-X47-RM HAI-327-RM HAI-337-RM HAI-347-RM HAW-337-RC HAW-347-RC HAC-337-RC HAC-347-RC HAI-X37-RC HAI-X47-RCAAW-X33RCHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT COLDX X X X X XX X X X X X X XX X X X X1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 35 3 4 5 3 4 5 3 4 3 4 5 4 5 4 5 3 4 31 1 1 1 1 1 1 1 1 1 1 1 1 1 13 2 3 4 2 3 4 3 4 2 3 4 3 4 3 4 3 4 21X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X XX X X X X X XXX X X X X X X X X X X5.6 5.9 6.3 5.5 5.8 6.2 5.05 6.05 5.85 6.15 6.551.55 1.95 1.75 2.15 1.3 1.7 1.42.20NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 1988 198059

Built-up <strong>Roofing</strong>FIELDS COMPANY, LLC1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE FIELDS BUR MANUAL6. FOR SALES/TECHNICAL INFORMATION: T. VANDERLINDA 800/627-40987. FELTS DATA: TRADE NAME (applicable ASTM standard), FIELDS F50 POLYSHIELD (D 4601, D 2178) FIELDS P79 POLYTEX 2(metric [39 5/8-in. wide]) FIELDS F52 GLASBASE 2 (D 4601) FIELDS P72 POLYROOF 2FIELDS F54 GLASPLY4 (D 2178, TYPE IV) FIELDS P74 POLYWEBFIELDS F55 POLYSHIELD 2 (D 4601, D 2178) FIELDS P75 POLYWEBFIELDS F56 GLASPLY6 (D 2178, TYPE VI) FIELDS P76 POLYWEBFIELDS F58 GLASCAP (D 3609)FIELDS P77 POLYTEXFIELDS M60 RUBRPOLY (D 4601, D 2178) FIELDS P78 POLYTEXFIELDS M62 RUBRGLAS (D4601, D 2178) FIELDS G360 GLASWEBFIELDS M64 RUBRPOLY2 (D 4601, D 2178) FIELDS G362 GLASWEBFIELDS M66 RUBRGLAS2 (D 4601, D 2178) FIELDS G60 GLASWEBFIELDS M68 RUBRCAP (D 5147)FIELDS G62 GLASWEBFIELDS P70 POLYROOF8. SPECIFICATION NUMBER AAW-325 AAW-315 AAW-329 AAW-315 AAW-X43 AAW-335 AAW-329 AAW-325 AAI-X33 AAI-325 AAI-315RC RC RC MC RC RC RC MC RC RC MC9. HOT AND/OR COLD APPLIED COLD COLD COLD COLD COLD COLD COLD COLD COLD COLD COLD10. DECK TYPENailable X X X X XInsulated X X X X X XNonnailable11. 11. SLOPE REQUIREMENTS (range in inches) 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3NUMBER OF PLIES12A. Total Plies 3 2 3 3 4 4 3 4 3 3 312B. Base Sheet 1 1 1 1 0 1 1 1 0 1 112C. Interply(ies) 2 2 2 1 4 3 2 2 3 2 112D. Cap Sheet 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyester X XOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed AsphaltCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/Cutback X X X X X X X XAluminum Coating X X X X X X X XVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmooth 1.1 1.25 1.2 1.85 1.4 1.55 1.6 1.3Cap Sheet 1.75 2.05 1.2517. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1980 1980 1980 1980 1980 1980 1980 1980 1980 1980 198019. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED60

Built-up <strong>Roofing</strong>FIRESTONE BUILDING PRODUCTS6YESDISTRIBUTOORSYESSEE FIRESTONE BUR TECHNICAL MANUALREGIONAL COORDINATORFIRESTONE PLY IV (ASTM D 2178 TYPE IV)FIRESTONE PLY IV (ASTM D2178 TYPE VI)MB BASE SHEET (ASTM D4601 TYPE II)SBS FLASHING (ASTM D6164 TYPE I)SBS VENTING BASE (NONE)AAI-X43 AAI-335 AAI-315 AAC-X33 AAC-325 AAC-329 AAC-315 AAC-X43 AAC-335 AAC-325 I-3-F-G I-4F-G I-M3F-G I-M4F-G CP3FG CP4FG CPM2FG CPM4FGRC RC MC RC RC RC MS RC RC RCCOLD COLD COLD COLD COLD COLD COLD COLD COLD COLD HOT HOT HOT HOT HOT HOT HOT HOTX X XX X X X X X X X X XX X X X X X X X X1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 - 6 1/4 - 6 1/4 - 6 1/4 - 6 1/4 - 6 1/4 - 6 1/4 - 6 1/4 - 64 4 3 3 3 3 3 4 4 3 3 4 4 5 3 4 2 40 1 1 1 1 1 0 1 1 1 1 14 3 1 3 2 2 1 4 3 2 3 41 1X X X X X X X X X X X X X X X X X XXX X X X X X X X X X X X X X X X X XX X X X X X X XX X X X X X X XX X1.95 1.6 2.25 1.4 1.55 1.6 1.3 1.551.75 2.05NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1980 1980 1980 1980 1980 1980 1980 1980 1980 1980 1995 1995 1995 1995 1995 1995 1995 19952.361

Built-up <strong>Roofing</strong>GAF MATERIALS CORPORATION1. NUMBER OF REGIONAL SERVICE LOCATIONS: 52. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE GAFMC GAFGLAS SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: REGIONAL OFFICE, TECHNICAL SERVICE OFFICE7. FELTS DATA: TRADE NAME (applicable ASTM standard), GAFGLAS PLY 4 (D 2178, TYPE IV)(metric [39 5/8-in. wide])GAFGLAS PLY 6 (D 2178, TYPE VI & IV)GAFGLAS MINERAL SURFACED CAP SHEET (D 3909)GAFGLAS#75 BASE SHEET (D 4601, TYPE II)GAFGLAS STRATAVENT PERFORATED BASE SHEET (D 4897)GAFGLAS STRATAVENT NAILABLE BASE SHEET (D 4897)GAFGLAS FLEXPLY6 (D 2178, TYPE VI & IV)GAFGLAS #80 ULTIMA BASE SHEET (D 4601, TYPE II)8. SPECIFICATION NUMBER NN-0- I-0-4- NN-0- I-0-4- NN-B- I-B-4- NN-B- I-B-4- NN-O- I-0-3- NN-B-4-G G 4-C C 4-G G 4-C C 3-G G 3-G9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailableInsulated X X X X XNonnailable X X X X X X11. 11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 6 0 – 6 0 – 3 0 – 3 0 – 6 0 – 6 0 – 3 0 – 3 0 – 3NUMBER OF PLIES12A. Total Plies 4 4 4 4 4 4 4 4 3 3 312B. Base Sheet 1 1 1 1 112C. Interply(ies) 4 4 4 4 3 3 3 3 3 3 212D. Cap Sheet13. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3 3 3 3Crushed Rock(lbs./ft 2 ) 4 4 4 4 4 4 415B. SURFACING - SMOOTHAsphalt X X X XCoal TarEmulsion/Cutback X X X XAluminum Coating X X X XVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap SheetOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.0 6.0 6.0 6.0 6.0 6.0 6.0Smooth 2.0 2.0 2.0 2.0Cap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 197419. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED62

Built-up <strong>Roofing</strong>I-B-3- NN-0- I-0-3- NN-B- I-B-3- NN-0- I-0-4- NN-B- I-B-4- NN-0- I-0-3- N-B-4- N-B-4- N-B-3- N-B-3- N-B-4- N-B-3- I-B-5- NN-B-G 3-C C 3-C C 4-M M 4-M M 3-M M G C G C M M M 5-MHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X XX X X X X X XX X X X X X0 – 3 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 3 0 – 6 0 – 3 0 – 6 0 – 6 0 – 6 0 – 6 0 – 63 3 3 3 3 4 4 4 4 3 3 4 4 3 3 4 3 5 51 1 1 1 1 1 1 1 1 1 1 1 12 3 3 2 2 3 3 2 2 2 2 3 3 2 2 2 1 3 31 1 1 1 1 1 1 1 1 1X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X X4 4 43 3 34 4 4X X X X X XX X X X X XX X X X X XX X X X X X X X X X6.0 6.0 6.02.0 2.0 2.0 2.0 2.0 2.02.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0NONE N N N N NONE NONE NONE NONE N N NONE NONE NONE N NONE N & S NONE NONE1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 1974 197463

Built-up <strong>Roofing</strong>GAF MATERIALS CORPORATION1. NUMBER OF REGIONAL SERVICE LOCATIONS: 52. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE GAFMC GAFGLAS SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: REGIONAL OFFICE, TECHNICAL SERVICE OFFICE7. FELTS DATA: TRADE NAME (applicable ASTM standard), GAFGLAS PLY 4 (D 2178, TYPE IV)(metric [39 5/8-in. wide])GAFGLAS PLY 6 (D 2178, TYPE VI & IV)GAFGLAS MINERAL SURFACED CAP SHEET (D 3909)GAFGLAS#75 BASE SHEET (D 4601, TYPE II)GAFGLAS STRATAVENT PERFORATED BASE SHEET (D 4897)GAFGLAS STRATAVENT NAILABLE BASE SHEET (D 4897)GAFGLAS FLEXPLY6 (D 2178, TYPE VI & IV)GAFGLAS #80 ULTIMA BASE SHEET (D 4601, TYPE II)8. SPECIFICATION NUMBER N-B-5- N-B-5- N-B-5- I-0-5- NN-0-5G C M M M9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT10. DECK TYPENailable X X XInsulated XNonnailable X11. 11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 6 0 – 6 0 – 6 0 – 6NUMBER OF PLIES12A. Total Plies 5 5 5 5 512B. Base Sheet 1 1 112C. Interply(ies) 4 4 3 4 412D. Cap Sheet 1 1 113. TYPES OF FELTGlass Fiber X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X XModifed Asphalt X X X X XCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4Slag (lbs./ft 2 ) 3Crushed Rock(lbs./ft 2 ) 415B. SURFACING - SMOOTHAsphalt XCoal TarEmulsion/Cutback XAluminum Coating XVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.0Smooth 2.0Cap Sheet 3.0 3.0 3.017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1974 1974 1974 1974 197419. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED64

Built-up <strong>Roofing</strong>HENRY COMPANY18YESDISTRIBUTORSNOCONTACT MANUFACTURERJ. HOLLERAN / S. LEONARDHENRY 604 (D 4601, TYPE II)HENRY 605 TYPE (ASTM D 3909)HENRY 607 (D 4601, TYPE II)HENRY MODIFIED PLUS NP 180/S (ASTM D6164-97 TYPE I; GRADE S)HENRY MODIFIED PLUS NP 180m (ASTM D6164-97 TYPE I, GRADE G)HENRY 195 POLYSTERHENRY 196 POLYESTERHENRY 600 RUFTACH3-NGC H4-NGC- H3-1GC- H4-IGC- H3-IGC- H4-1GC- H3-NPE- H3-1PE- H3-NPE- H3-1PEMR MR MR MR GC/GN GV/GN MR MR GV/GN GV/GNCOLD COLD COLD COLD COLD COLD COLD COLD COLD COLDX X X X X XX X X XX X X X1/8" - 3" 0 - 3 1/8" - 3" 0 - 3 1/8" - 3" 1/8" - 3" 1/8" - 3" 1/8" - 3" 1/8" - 3" 1/8" - 3"3 4 3 4 3 4 3 3 3 31 1 1 1 1 1 1 12 3 3 4 2 3 2 2 2 2X X X X X XX X X XX X X X X X X X X X400 400 400 400300 300 300 300400 400 400 400X X X X X X X X X XX X X X X XX X X X X XX X X X578 616 547 509196 234 215 252 169 1321984 1984 1984 1984 1984 1984 1989 1989 1989 198965

Built-up <strong>Roofing</strong>INTEC/PERMAGLAS1. NUMBER OF REGIONAL SERVICE LOCATIONS: 62. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE BUILT-UP ROOFING SYSTEMS MANUAL6. FOR SALES/TECHNICAL INFORMATION: 800/624–68327. FELTS DATA: TRADE NAME (applicable ASTM standard), COMBINATION BASE (D 4601, TYPE I)(metric [39 5/8-in. wide])ULTRA BASE (D 4601, TYPE I/II)TOUGH PLY IV (D 2178, TYPE IV)ULTRA PLY VI (D 2178, TYPE VI)ULTRA CAP (D 3909)PERMAVENT (D 4897, TYPE II)FLEX BASE 30 (D 4601, TYPE II)8. SPECIFICATION NUMBER M-B5UP- M-B4UP- ERA- ERA- G-4UP- G-B5TP- G-B4UP- M-4UP- ERA-N N 4UP-RI B5TP-RI RI RI N RI B4UP-N9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X XInsulated X X X X XNonnailable11. SLOPE REQUIREMENTS (range in inches) 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3 1/4 – 3NUMBER OF PLIES12A. Total Plies 5 4 4 5 4 5 4 4 412B. Base Sheet 1 1 1 1 1 112C. Interply(ies) 3 2 4 4 4 4 3 3 312D. Cap Sheet 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X XModifed AsphaltCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4Slag (lbs./ft 2 ) 3 3 3Crushed Rock(lbs./ft 2 ) 4 4 415B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum Coating X X XVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.0 6.0 6.0Smooth 2.0 2.0 2.0Cap Sheet 2.0 2.0 2.017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1976 1976 1976 1976 1976 1976 1976 1976 197619. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED66

Built-up <strong>Roofing</strong>JOHNS MANVILLE INTERNATIONAL, INC.10YESDISTRIBUTORSYESSEE BUR PRODUCT & SPECIFICATIONS MANUALREGIONAL OFFICEGLASPLY PREMIER (D 2178, TYPE VI)GLASPLY IV (D 2178, TYPE IV)GLASBASE (D 4601)PERMAPLY 28GLASKAP (D 3909)VENTSULATION (D 4897, TYPE II)GLASTITE FLEXIBLE (NONE)GLASBASE PLUS (D 4601)DYNAFLEX (NONE)5GNS 4GIS 4GNS 3GIS 3GNS 4GIG 3GIG 5GNG 4GNG 3GNG 5GIC 5GNC 4GIC 4GNC 3GIC 3GNC 5GLG 4GLG 3GLGHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X X X X X XX X X X X X XX X X X X X X0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 1/4 – 6 1/4 – 6 1/4 – 6 1/4 – 6 1/4 – 6 1/4 – 6 0 – 3 0 – 3 0 – 35 4 4 3 3 4 3 5 4 3 5 5 4 4 3 3 5 4 31 1 1 1 1 1 1 1 1 1 1 14 4 3 3 2 4 3 4 3 2 4 3 3 2 2 1 4 3 21 1 1 1 1 1X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X4 4 4 4 4 4 4 43 3 3 3 3 3 3 3X X X X XX X X X XX X X X XX X X X X X6.30 6.0 6.90 6.60 6.30 6.9 6.3 61.80 1.40 1.60 1.10 1.302.40 2.40 2.0 2.20 2.0 1.802,3 2,3 2,3 3 3 2,31978 1976 1978 1980 1980 1978 1978 1978 1978 1980 1978 1978 1978 1978 1978 1980 1978 1978 1978404 357 310 288 404 310 357 288351 343 331 247 351 331 343 24767

Built-up <strong>Roofing</strong>KARNAK CORPORATION1. NUMBER OF REGIONAL SERVICE LOCATIONS: 72. LICENSED APPLICATOR AGREEMENT (yes/no): NO3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE KARNAK SPECIFICATIONS6. FOR SALES/TECHNICAL INFORMATION: 800/526–42367. FELTS DATA: TRADE NAME (applicable ASTM standard), POLY-MAT REMAY INC(metric [39 5/8-in. wide])RESAT-MAT43-LB. BASE CHOICE OF MANUFACTURERSNO. 31 GLASS MEMBRANE (D1668)8. SPECIFICATION NUMBER P-21 P-22 P-23 P-24 ARSYSTEM9. HOT AND/OR COLD APPLIED COLD COLD COLD COLD COLD10. DECK TYPENailable X X X X XInsulated X X X X XNonnailable X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6NUMBER OF PLIES12A. Total Plies 1 2 3 4 112B. Base Sheet 1 2 1 1 112C. Interply(ies) 2 312D. Cap Sheet13. TYPES OF FELTGlass FiberOrganicAsbestosPolyester X X X X XOther14. INTERPLY ADHESIVEAsphalt X X X XModifed Asphalt X X X XCoal TarElastomeric Adhesive X X X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4Slag (lbs./ft 2 ) 3 3 3 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphalt X X X X XCoal TarEmulsion/Cutback X X X XAluminum Coating X X X X XVinvl/Vinyl Coating15C. SURFACING - OTHERMineral Granules X X X X XCap SheetOther X X X X X16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 1.13 1.32 1.53 1.75 1.11Smooth 0.63 0.72 0.93 1.15 0.61Cap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1965 1965 1965 1965 197219. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED68

Built-up <strong>Roofing</strong>KOPPERS INDUSTRIES, INC.32YESDISTRIBUTORS, DIRECTNOMAX. SLOPE REQUIREMENTS (SEE BELOW)800/558–2706NO.-15 TARRED FELT (D 227)ASPHALT GLASS FELT (D 2178, TYPE IV)TAR GLASS FELT (D 4990 I)PREMIUM TAR-GLASS FELT (D 4990 II)220-4 210-4 420-4 410-4 495-4 490-4 IR-264 IR-274 1R-464 IR-474 220-3 420-3 495-3 IR-263 IR-273 IR-463 IR-473HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X XX X X X X X X X X X XX X X X X X X X X X0 – 1/2 0 – 1/2 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/2 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/4 0 – 1/44 4 4 4 4 4 5 4 5 4 3 3 3 4 3 4 31 1 1 1 1 1 1 14 3 4 3 4 3 4 4 4 4 3 3 3 3 3 3 3X X X X X X X X X XX X X X X X XX X X X X X X X X X X X X X X X X4 4 4 4 4 4 4 4 43 3 3 3 3 3 3 3 310 10 10 10 10.0 10.0 10.0 10.0X X X X X X X X6.0 6.0 6.0 6.0 6.0 6.0 12 12 12 12 5.50 5.50 5.50 11.50 11.50 11.50 11.50NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1928 1928 1986 1986 1990 1990 1991 1991 1991 1991 1928 1986 1990 1991 1991 1991 1991X X X X X X X X X X X X X X X X X69

Built-up <strong>Roofing</strong>MALARKEY ROOFING CO.1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE MALARKEY SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: J. DECHANDT AND M. MALARKEY7. FELTS DATA: TRADE NAME (applicable ASTM standard), #515 STANDARD BASE (D 4601) #625 PARAGON SBS MINERAL (D 6163)(metric [39 5/8-in. wide]) #501 PREMIUM 1 SBS BASE (D 4601) #650 PANOPLY SBS MINERAL (D 6163)#601 HP POLYGLASS SBS MINERAL (D 5147) #159 APP SMOOTH (D 5147)#602 ARCTIC SHIELD SBS BASE (D 4601) #160 APP SMOOTH (D 5147)#603 SUPER BASE SBS (D 4601) #161 APP MINERAL (D 5147)#605 PANOPLY SBS BASE (D 4601) #162 APP MINERAL (D 5147)#1000 ESHAVENT THERMAL SBS (D 4897) #916 SBS WALK BOARD#500 PREMIUM PLY (D 2178)#350 PREMIUM SBS MINERAL (D 5147)#502 PREMIUM MINERAL (D 3909)#506 SUPER 6 PLY TYPE VI (D 2178)8. SPECIFICATION NUMBER M3-XHA M3-AHA M3-BHA M4-XHA M4-BHA M4-EHA M5-BHA M5-EHA S3-XHX S3-XBX S3-BBXM3-XIA M3-AIA M3-BIA M4-XIA M4-BIA M4-EIA M5-BIA M5-EIA S3-XIX9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT/CLD HOT/CLD10. DECK TYPENailable X X X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6 0 – 6NUMBER OF PLIES12A. Total Plies 3 3 3 4 4 4 5 5 3 3 312B. Base Sheet 1 1 1 1 1 1 112C. Interply(ies) 2 1 1 3 2 2 3 3 3 3 212D. Cap Sheet 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/Cutback X X XAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmooth 1.32 1.89 1.64Cap Sheet 1.75 1.67 1.69 2.01 2.05 2.25 2.41 2.6117. RESTRICTED REGIONS (refer to manufacturer's literature) 2,3 2,3 2,3 NONE NONE NONE NONE NONE 2,3 2,3 2,318. YEAR OF FIRST COMMERCIAL USE19. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED70

Built-up <strong>Roofing</strong>S3-XEX S3-BEX S4-BBX G3-XHX G4-XHX G3-BHX G4-BHX S4-BEX S4-EEX S4-AHX S4-BHX G3-BBX G3-EEX G4-BBX M2-CXB M2-DXB M2-EXB M3-BHB M3-BBBG3-XIX G4-XIX G3-BIX G4-BIX S4-AIX S4-BIX M3-BIBHOT/CLD HOT/CLD HOT/CLD HOT HOT HOT HOT HOT/CLD HOT/CLD HOT HOT/CLD HOT/CLD HOT/CLD HOT/CLD HOT/CLD HOT/CLD HOT/CLD HOT HOT/CLDX X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X X0 – 6 0 – 6 0 – 6 0 – 3 0 – 3 0 – 3 0 – 3 0 – 6 0 – 6 0 – 6 0 – 6 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 33 3 4 3 4 3 4 4 4 4 4 3 3 4 2 2 2 3 31 1 1 1 1 1 1 1 1 1 1 1 1 1 13 2 3 3 4 2 3 3 3 4 3 2 2 3 1 11 1 1 1 1X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X4 4 4 4 4 4 4X X X X X X XX X X X X5.68 6.04 5.62 5.98 6.00 6.60 6.552.49 2.04 2.192.79 2.99 1.60 1.62 1.99 2.27 2.02 1.93 2.122,3 2,3 NONE NONE NONE NONE NONE NONE NONE 2,3 2,3 2,3 NONE NONE NONE NONE NONE NONE NONE71

Built-up <strong>Roofing</strong>MALARKEY ROOFING CO.1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE MALARKEY SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: J. DECHANDT AND M. MALARKEY7. FELTS DATA: TRADE NAME (applicable ASTM standard), #515 STANDARD BASE (D 4601) #625 PARAGON SBS MINERAL (D 6163)(metric [39 5/8-in. wide]) #501 PREMIUM 1 SBS BASE (D 4601) #650 PANOPLY SBS MINERAL (D 6163)#601 HP POLYGLASS SBS MINERAL (D 5147) #159 APP SMOOTH (D 5147)#602 ARCTIC SHIELD SBS BASE (D 4601) #160 APP SMOOTH (D 5147)#603 SUPER BASE SBS (D 4601) #161 APP MINERAL (D 5147)#605 PANOPLY SBS BASE (D 4601) #162 APP MINERAL (D 5147)#1000 ESHAVENT THERMAL SBS (D 4897) #916 SBS WALK BOARD#500 PREMIUM PLY (D 2178)#350 PREMIUM SBS MINERAL (D 5147)#502 PREMIUM MINERAL (D 3909)#506 SUPER 6 PLY TYPE VI (D 2178)8. SPECIFICATION NUMBER M3-BCB M3-BDB M3-EHB M3-EBB M3-EEB M3-FHB M3-FBB M3-FEB M4-BHB M4-BBB M3-FHBM3-EIB M3-FIB M4-BIB M3-FIB9. HOT AND/OR COLD APPLIED HOT/CLD HOT/CLD HOT HOT/CLD HOT/CLD HOT HOT HOT HOT/CLD HOT/CLD HOT10. DECK TYPENailable X X X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3NUMBER OF PLIES12A. Total Plies 3 3 3 3 3 3 3 3 4 4 312B. Base Sheet 1 1 1 1 1 1 1 1 1 1 112C. Interply(ies) 1 1 1 1 1 1 1 1 2 2 112D. Cap Sheet 1 1 1 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive X X X X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmoothCap Sheet 2.29 2.57 2.12 2.32 2.52 2.01 2.45 2.40 2.29 2.67 2.0117. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE19. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED72

Built-up <strong>Roofing</strong>M4-FHB M4-FBB M4-FEB M5-BHB M5-EHB M2-CXC M2-DXC M2-EXC M3-BHC M3-BBC M3-EHC M3-EBC M3-EEC M3-FHC M3-FBC M3-FCC M3-FDC M3-FEC M4-BHCM4-FIB M5-BIB M5-EIB M3-BIC M3-EIC M3-FIC M4-BICHOT HOT HOT HOT HOT HOT/CLD HOT/CLD HOT/CLD HOT HOT/CLD HOT HOT/CLD HOT/CLD HOT HOT HOT HOT HOT HOTX X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X X0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 34 4 4 5 5 2 2 2 3 3 3 3 3 3 3 3 3 3 41 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 2 2 3 3 1 1 1 1 1 1 1 1 1 1 21 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X XX X X X X X X X X X X X X X X X X X X2.37 2.75 3.15 2.61 2.85 1.99 2.27 2.02 1.91 2.12 2.13 2.32 2.52 2.01 2.20 2.37 2.65 2.40 2.04NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE73

Built-up <strong>Roofing</strong>MALARKEY ROOFING CO.1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE MALARKEY SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: J. DECHANDT AND M. MALARKEY7. FELTS DATA: TRADE NAME (applicable ASTM standard), #515 STANDARD BASE (D 4601) #625 PARAGON SBS MINERAL (D 6163)(metric [39 5/8-in. wide]) #501 PREMIUM 1 SBS BASE (D 4601) #650 PANOPLY SBS MINERAL (D 6163)#601 HP POLYGLASS SBS MINERAL (D 5147) #159 APP SMOOTH (D 5147)#602 ARCTIC SHIELD SBS BASE (D 4601) #160 APP SMOOTH (D 5147)#603 SUPER BASE SBS (D 4601) #161 APP MINERAL (D 5147)#605 PANOPLY SBS BASE (D 4601) #162 APP MINERAL (D 5147)#1000 ESHAVENT THERMAL SBS (D 4897) #916 SBS WALK BOARD#500 PREMIUM PLY (D 2178)#350 PREMIUM SBS MINERAL (D 5147)#502 PREMIUM MINERAL (D 3909)#506 SUPER 6 PLY TYPE VI (D 2178)8. SPECIFICATION NUMBER M4-BBC M4-EHC M4-EBC M4-FHC M4-FBC M4-FEC M5-BHC M5-BBC M5-EBC M5-FHC M5-FBCM4-EIC M4-FIC M5-BIC M5-FIC9. HOT AND/OR COLD APPLIED HOT/CLD HOT HOT/CLD HOT HOT HOT HOT HOT/CLD HOT/CLD HOT HOT10. DECK TYPENailable X X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3NUMBER OF PLIES12A. Total Plies 4 4 4 4 4 4 5 5 5 5 512B. Base Sheet 1 1 1 1 1 1 1 1 1 1 112C. Interply(ies) 2 2 2 2 2 2 3 3 3 3 312D. Cap Sheet 1 1 1 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive X X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmoothCap Sheet 2.67 2.49 2.87 2.37 2.75 3.15 2.61 3.22 3.42 2.59 3.3017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE19. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED74

Built-up <strong>Roofing</strong>M2-CXD M2-DXD M2-EXD M3-BHD M3-BBD M3-EHD M3-EBD M3-EED M3-FHD M3-FBD M3-FED M4-BHD M4-BBD M4-EHD M4-EBD M4-FHD M4-FBD M4-FED M5-EHDM3-BID M3-EID M3-FID M4-BID M4-EID M4-FID M5-EIDHOT/CLD HOT/CLD HOT/CLD HOT HOT/CLD HOT HOT/CLD HOT/CLD HOT HOT HOT HOT HOT/CLD HOT HOT/CLD HOT HOT HOT HOTX X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X X0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 32 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 51 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11 1 1 1 1 1 1 1 2 2 2 2 2 2 2 31 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X XX X X X X X X XX X X X X X X X X X X X X X X X X X X2.17 2.45 2.20 2.11 2.30 2.31 2.50 2.70 2.19 2.38 2.58 2.47 2.85 2.67 3.05 2.55 2.93 3.33 3.03NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE75

Built-up <strong>Roofing</strong>MALARKEY ROOFING CO.1. NUMBER OF REGIONAL SERVICE LOCATIONS: 152. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE MALARKEY SPEC MANUAL6. FOR SALES/TECHNICAL INFORMATION: J. DECHANDT AND M. MALARKEY7. FELTS DATA: TRADE NAME (applicable ASTM standard), #515 STANDARD BASE (D 4601) #625 PARAGON SBS MINERAL (D 6163)(metric [39 5/8-in. wide]) #501 PREMIUM 1 SBS BASE (D 4601) #650 PANOPLY SBS MINERAL (D 6163)#601 HP POLYGLASS SBS MINERAL (D 5147) #159 APP SMOOTH (D 5147)#602 ARCTIC SHIELD SBS BASE (D 4601) #160 APP SMOOTH (D 5147)#603 SUPER BASE SBS (D 4601) #161 APP MINERAL (D 5147)#605 PANOPLY SBS BASE (D 4601) #162 APP MINERAL (D 5147)#1000 ESHAVENT THERMAL SBS (D 4897) #916 SBS WALK BOARD#500 PREMIUM PLY (D 2178)#350 PREMIUM SBS MINERAL (D 5147)#502 PREMIUM MINERAL (D 3909)#506 SUPER 6 PLY TYPE VI (D 2178)8. SPECIFICATION NUMBER M5-EBD M5-FHD M5-FBD M4-BHD M4-BBD M4-EHD M4-EBD M4-FHD M4-FBD M4-FED M5-EHDM5-FID M4-BID M4-EID M4-FID M5-EID9. HOT AND/OR COLD APPLIED HOT/CLD HOT HOT HOT HOT/CLD HOT HOT/CLD HOT HOT HOT HOT10. DECK TYPENailable X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3NUMBER OF PLIES12A. Total Plies 5 5 5 4 4 4 4 4 4 4 512B. Base Sheet 1 1 1 1 1 1 1 1 1 1 112C. Interply(ies) 3 3 2 2 2 2 2 2 2 2 312D. Cap Sheet 1 1 1 1 1 1 1 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X X XOrganicAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphalt X X X X X X X X X X XModifed Asphalt X X X X X X X X X X XCoal TarElastomeric Adhesive X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 )Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/CutbackAluminum CoatingVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X X X X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )AggregateSmoothCap Sheet 3.60 2.91 3.48 2.47 2.85 2.67 3.05 2.55 2.93 3.33 3.0317. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE19. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED76

Built-up <strong>Roofing</strong>MFM BUILDING PRODUCTS CORP.1YESDISTRIBUTORS/DIRECTNONONESTEVE FOSTER/WES SIMPSONDURAPLY IV (D 3178, TYPE IV)DURABASE (NONE)POLYPLY (NONE)M5-EBD M5-FHD M5-FBD F2-BXG F2-EXG F3-BHG F3-BBG F3-EHG 43- 43- 43- 44- 52- 52- 52- 52-M5-FID F3-BIG F3-EIG GAW GSW GAC GSC PAW PSW PSC PACHOT/CLD HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X X XX X X X X X X X X X X XX X X X X X X X X X X X0 – 3 0 – 3 0 – 3 0 – 3 NONE NONE NONE NONE 1/2 – 3 1/2 – 6 1/2 – 3 1/2 – 6 1/2 – 3 1/2 – 3 1/2 – 3 1/2 – 35 5 5 2 2 3 3 3 4 4 3 4 3 3 2 21 1 1 1 1 1 1 1 1 1 13 3 2 1 1 1 3 3 3 4 2 2 2 21 1 1 1 1 1 1 1X X X X X X X X X X X XX X X XX X X X X X X X X X X X X X X XX X X X X X X XX4 4 4 4XXX X X XX X X X X X X X6.0 2.0 6.0 2.0 5.0 2.0 2.0 6.03.60 2.91 3.48 1.55 1.75 1.91 2.10 2.11NONE NONE NONE NONE NONE NONE NONE NONE1976 1976 1976 1976 1982 1982 1982 1982343 343 293 382257 257 241 33323.5 23.5 18.8 21.727.9 27.9 16.8 21.3687 687 840 866523 523 840 88377

Built-up <strong>Roofing</strong>SOUTHWESTERN PETROLEUM1. NUMBER OF REGIONAL SERVICE LOCATIONS:2. LICENSED APPLICATOR AGREEMENT (yes/no): NO3. DISTRIBUTION METHOD (distributors and/or direct): DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): NO5. LIMITATIONS/RESTRICTIONS: SEE COLD PROCESS BUR SYSTEM 301 APPLICATION GUIDE6. FOR SALES/TECHNICAL INFORMATION: R. KLEINTOP7. FELTS DATA: TRADE NAME (applicable ASTM standard), ASPHALT ROLL ROOFING (D 2626)(metric [39 5/8-in. wide])8. SPECIFICATION NUMBER COLD PRO-CESS BUR301 SYSTEM9. HOT AND/OR COLD APPLIED COLD10. DECK TYPENailableXInsulatedXNonnailableX11. SLOPE REQUIREMENTS (range in inches) 1/4 & UPNUMBER OF PLIES12A. Total Plies 312B. Base Sheet12C. Interply(ies) 312D. Cap Sheet13. TYPES OF FELTGlass FiberOrganicXAsbestosPolyesterOther14. INTERPLY ADHESIVEAsphaltXModifed AsphaltCoal TarElastomeric Adhesive15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4-6Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltXCoal TarEmulsion/CutbackXAluminum CoatingXVinvl/Vinyl Coating15C. SURFACING - OTHERMineral GranulesXCap SheetOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 6.7Smooth 1.5Cap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE18. YEAR OF FIRST COMMERCIAL USE 197119. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD-XDB Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED78

Built-up <strong>Roofing</strong>TAMKO ROOFINGTREMCO, INC.27 18YESYESDISTRIBUTORSDIRECTNOYESSEE TAMKO COMMERCIAL ROOFING MANUALSEE TREMCO REPDISTRICT OFFICE/TECHNICAL SERVICESALES OFFICE/TECHNICAL DEPT.TYPE 43 BASE (D 2626)BURMASTIC COMPOSITE PLY SHEET (NONE)TAM CAP (3909), (METRIC)BURMASTIC GLASS PLY SHEET(D 4601, TYPE II)VAPOR CHAN (D 4897 TYPE II) (METRIC)THERMGLASS ROOFING PLY (D 2178, TYPE VI)GLASS-BASE (D 4601 TYPE II) (METRIC)POLYTHERM PLY SHEET (NONE)TAM-GLASS PREMIUM (D 2178, TYPE VI) (METRIC)TAM-PLY IV (D 2178 TYPE IV) (METRIC)BASE-N-PLY (D4601 TYPE II) (METRIC)501 502 503 504 505 507 512 514 515 516 BURMAS- BURMAS- BURMAS- BURMAS- THERM BURMAS- BURMAS- BURMAS-601 602 603 604 605 607 612 614 615 616 TIC 100 TIC 100 TIC 200 TIC 200 100 TIC 100 TIC 100 TIC 200HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT COLD COLD COLD COLD HOT COLD COLD COLDX X X X X X X X X X X XX X X X X X X X X X X X X XX X X X X X X X0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0 – 3 0–1 1/2 0 – 3 0 – 3 0 – 1 1/8 – 4 1/8 – 4 1/8 – 4 1/8 – 4 1/8 – 3 1/8 – 4 1/8 – 4 1/8 – 43 4 4 3 4 5 4 4 4 4 3 3 3 3 3 3 3 31 1 1 13 3 4 3 4 4 2 3 3 31 1 1X X X X X X X X X X X X X X XX X XX X XX X X X X X X X X XX X X X X X XX4 4 4 4 4.0 4.0 4.03 3 3 3X X XX X X X X X X XX X X X X X X XX X X X XX X XX X X X XX X X X X6.0 6.0 6.0 7.0 5.70 5.70 5.701.50 1.50 1.50 2.30 2.30 1.80 2.30 2.302.0 2.1 2.0NONE NONE NONE YES NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1978 1978 1986 1986 1982 1978 1978 1986330 330 390 390 255 330 330 390295 295 400 400 240 295 295 40079

Built-up <strong>Roofing</strong>TREMCO, INC.TRI-PLY1. NUMBER OF REGIONAL SERVICE LOCATIONS: 18 52. LICENSED APPLICATOR AGREEMENT (yes/no): YES YES3. DISTRIBUTION METHOD (distributors and/or direct): DIRECT DISTRIBUTORS4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES YES5. LIMITATIONS/RESTRICTIONS: SEE TREMCO REP SEE TRI-PLY6. FOR SALES/TECHNICAL INFORMATION: SALES OFFICE/TECHNICAL DEPT. DOMINIC MORAN/ROBERT WHITE7. FELTS DATA: TRADE NAME (applicable ASTM standard), BURMASTIC COMPOSITE PLY SHEET (NONE) EAGLE BASE ULTRA TYPE I/II(metric [39 5/8-in. wide]) BURMASTIC GLASS PLY SHEET(D 4601, TYPE II) EAGLE BONDABLE 28 TYPE I/IITHERMGLASS ROOFING PLY (D 2178, TYPE VI)EAGLE SUPER GLASS TYPE IIIPOLYTHERM PLY SHEET (NONE)EAGLE TOUGH GLASS TYPE IVEAGLE ULTRA GLASS TYPE VIEAGLE CAP (3909)8. SPECIFICATION NUMBER BURMAS- THERM THERM THERM THERM I-5-4P-M I-4-4P-G I-4-4P-S I-4-3PTIC 200 100 100 200 2009. HOT AND/OR COLD APPLIED COLD HOT HOT HOT HOT HOT HOT HOT HOT10. DECK TYPENailable X X X X X X X X XInsulated X X X X XNonnailable X X X X X11. SLOPE REQUIREMENTS (range in inches) 1/8 – 4 1/8 – 3 1/8 – 3 1/8 – 3 1/8 – 3 0 – 6 0 – 3 0 – 6 0 – 6NUMBER OF PLIES12A. Total Plies 3 3 3 3 3 5 4 4 412B. Base Sheet 312C. Interply(ies) 4 4 412D. Cap Sheet 1 113. TYPES OF FELTGlass Fiber X X X X X XOrganicAsbestosPolyester X X XOther14. INTERPLY ADHESIVEAsphalt X X X XModifed AsphaltXCoal TarElastomeric Adhesive X X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4.0 4.0 4.0 4Slag (lbs./ft 2 ) 3Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltXCoal TarEmulsion/Cutback X X XAluminum Coating X X XVinvl/Vinyl Coating X X15C. SURFACING - OTHERMineral Granules X XCap Sheet X XOther X X16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 5.70 5.20 5.0Smooth 1.80 1.60Cap Sheet17. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1986 1982 1982 1983 1983 1985 1985 1985 198519. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD 390 255 255 265 265-XD 400 240 240 225 225B Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED80

Built-up <strong>Roofing</strong>TRI-PLY5YESDISTRIBUTORSYESSEE TRI-PLYDOMINIC MORAN/ROBERT WHITEEAGLE BASE ULTRA TYPE I/IIEAGLE BONDABLE 28 TYPE I/IIEAGLE SUPER GLASS TYPE IIIEAGLE TOUGH GLASS TYPE IVEAGLE ULTRA GLASS TYPE VIEAGLE CAP (3909)I-3-3P-G I-3-3P-S I-3-2P-M N-3- N-3- N-3- N-4 N-4- N-4- NN-3 NN-3 NN-3 N-5 NN-5-B NN-4 NN-4 NN-4B2P-G B2P-S BP-M B3P-G B3P-S B2P-M B2P-G B2P-S BP-M B3P-M 3P-M B3P-G B3P-S B2P-MHOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOT HOTX X X X X X XX X XX X X X X X X0 – 3 0 – 6 0 – 6 0 – 3 0 – 6 0 – 6 0 – 3 0 – 6 0 – 6 0 – 3 0 – 6 0 – 6 0 – 6 0 – 6 0 – 3 0 – 6 0 – 63 3 3 3 3 3 4 4 4 3 3 3 5 5 4 4 42 1 1 1 1 1 1 1 1 1 1 1 1 1 13 3 1 2 2 1 3 3 2 2 2 1 3 3 3 3 21 1 1 1 1 1X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X4 4 4 4 43 3 3 3 3X X X X XX X X X XX X X X XX X X X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 1985 198581

Built-up <strong>Roofing</strong>W.P. HICKMAN1. NUMBER OF REGIONAL SERVICE LOCATIONS: 52. LICENSED APPLICATOR AGREEMENT (yes/no): YES3. DISTRIBUTION METHOD (distributors and/or direct): DIRECT4. PREFORMED ACCESSORIES AVAILABLE (yes/no): YES5. LIMITATIONS/RESTRICTIONS: SEE HICKMAN REP6. FOR SALES/TECHNICAL INFORMATION: R. GALLION / K BRZOZOWSKI/ C FITZGERALD7. FELTS DATA: TRADE NAME (applicable ASTM standard), MULTI-PLY GLASS(D 4601, TYPE II)(metric [39 5/8-in. wide])MULTI-PLY GLASS C/L(NONE)PERFORMANCE PLY(NONE)WEATHER PLY (NONE)POLYESTER PLY(NONE)PREMIUM PLY (ASTM D 2178, TYPE VI)PIKA PLY CAP SHEETHICKMAN PREMIUM CAPHK TARRED FELT (D 227)8. SPECIFICATION NUMBER BUR PLUS BUR PLUS BUR PLUS BUR PLUS TAR PERFORM- WEATHER PIKA PLY BUR PLUS BUR PLUS BUR PLUSGLASS/POLY- GLASS/POLY- PIKA PLY 505 PLUS ANCE PLY PLY CAP GLASS GLASS POLY-ESTER ESTER CAP SHEET MS + MS/FR MA+MA/FR SHEET ESTER9. HOT AND/OR COLD APPLIED HOT HOT HOT HOT HOT COLD COLD COLD HOT HOT HOT10. DECK TYPENailable X X X X X X X X X X XInsulated X X X X X X X X X X XNonnailable X X X X X X X X X X X11. SLOPE REQUIREMENTS (range in inches) 1/8 – 3 1/8 – 3 1/8 – 3 0 – 1/2 0 – 1/2 1/8 – 4 1/8 - 4 1/8 – 4 1/8 – 3 1/8 – 3 1/8 – 3NUMBER OF PLIES12A. Total Plies 4 4 3 4 4 3 3 3 3 3 312B. Base Sheet 1 1 112C. Interply(ies) 3 3 2 3 4 2 2 2 3 3 312D. Cap Sheet 1 1 1 113. TYPES OF FELTGlass Fiber X X X X X X X X X XOrganic X XAsbestosPolyester X X X X X X X X XOther14. INTERPLY ADHESIVEAsphalt X X X X X X XModifed Asphalt X X X X X XCoal Tar X XElastomeric Adhesive X X X15A. SURFACING - AGGREGATEGravel (lbs./ft 2 ) 4 4 4 4Slag (lbs./ft 2 )Crushed Rock(lbs./ft 2 )15B. SURFACING - SMOOTHAsphaltCoal TarEmulsion/Cutback X X XAluminum Coating X X XVinvl/Vinyl Coating X X X15C. SURFACING - OTHERMineral GranulesCap Sheet X X X X XOther16. WEIGHT, INCLUDING PLIES (approx. lbs./ft 2 )Aggregate 5.25 6.0 6.0 5.25Smooth 1.90 1.85 1.80Cap Sheet 1.85 2.25 2.25 2.5017. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE NONE18. YEAR OF FIRST COMMERCIAL USE 1985 1985 1985 1994 1985 1985 1995 1985 1985 1985 198519. TEST RESULTS PER NBS BSS #55MD = MACHINE DIRECTIONXD = CROSS DIRECTIONA Tensile Strength (>200 lb/in @ 0 o F) -MD 260 260 275-XD 245 245 255B Thermal Expansion (not > 40x10 –6 / o F@0 o F to –30 o F) -MD-XDC Thermal Base Shock (not < 100 o F) -MD-XD20. SEE APPENDIX IF CHECKED82

Built-up <strong>Roofing</strong>BUR PLUS M.-PLY M.-PLY PERFORM- WEATHER M.-PLY M.-PLYPOLY- GLASS GLASS ANCE PLY PLY COMBI- COMBI-ESTER MS+MS/FR MA+MA/FR NATION NATIONHOT COLD COLD HOT HOT COLD COLDX X X X X X XX X X X X X XX X X X X X X1/8 – 3 1/8 – 4 1/8 – 4 1/8 – 3 1/8 – 3 1/8 – 4 1/8 – 43 3 3 3 3 4 41 13 3 3 2 2 3 31 1X X X X X XX X X X XX X XX X X X X XX4 4 4XXXXXXXXXXXX5.25 5.75 5.802.35 2.401.85 1.85NONE NONE NONE NONE NONE NONE NONE1985 1985 1985 1985 1995 1985 1985275 335 335255 300 30083

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME ALLIED ALLIED ALLIED ALLIED ALLIED AMERICANSIGNAL INC. SIGNAL INC. SIGNAL INC. SIGNAL INC. SIGNAL INC. LUBRICANTS2. PRODUCT NAME MILLENNIUM MILLENNIUM MILLENNIUM SPM GPM TIFFANYBASE SHEET SMOOTH MOP GMC MILLENNIUM MILLENNIUM3. PRODUCT DESCRIPTIONType of Modifier TARDYNE TARDYNE TARDYNE TARDYNE TARDYNE APPThickness (mils) 80 120 150 120 150 157Top Surface SMOOTH SMOOTH MINERAL SMOOTH MINERAL MODIFIEDBITUMENReinforcing Material FIBERGLASS FIBERGLASS FIBERGLASS POLYESTER/ SCRIMPOLYESTER /SCRIMNON-WOVENPOLYESTERColors BLACK BLACK GRAY / BLACK /LIGHT BEIGEInstalled Weight (lbs./ft 2 without ballast) 0.53 0.75 0.87 0.874. KINDS OF FIELD SURFACING REQUIRED CAP SHEET CAP SHEET NONE CAP SHEET NONE NONEBLACK5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HOT MOP HOT MOP HOT /MOP COLD HOT / MOP COLD TORCHHEAT WELD HEAT WELD HEAT WELD7. TYPES OF ROOF SYSTEMS:COLD COLD COLDLoose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) HOT MOP/COLD HOT MOP/COLD HOT MOP/COLD X X TORCHProtected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED NONE NONE NONE NONE NONE POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X OMineral FiberOPolystyreneOCellular Glass X X X X X OPhenolic O O O O O OFiberboard X X X X X OPerlite X X X X X OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X X X X XWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O O O O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 30 - 100 30 - 100 30 - 100 30 -100 30 - 100 0 – 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALS13. FLASHING METHOD MILLENNIUM MILLENNIUM MILLENNIUM MILLENNIUM MILLENNIUM TORCHMASTIC MASTIC MASTIC MASTIC MASTIC14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1994 1994 1994 1994 1994 198117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USANONEWithin USAMILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS. DIRECT DISTRS. DIRECT DISTRS. DIRECT DISTRS. DIRECT DISTRS. DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 6 6 6 6 620. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES NO21. FOR SALES INFORMATION, CONTACT: REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL R. G. READOFFICE OFFICE OFFICE OFFICE OFFICE 937/222–285122. FOR TECHNICAL INFORMATION, CONTACT: TECHINCAL TECHINCAL TECHINCAL TECHINCAL TECHINCAL R. G. READSERVICES SERVICES SERVICES SERVICES SERVICES 937/222–285123. SEE APPENDIX IF CHECKED84

Modified Bitumen Part 1 - <strong>General</strong> InformationBITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC.MDA APS-4T APM-4T APM-4.5T COMPABASE MDS SPM-4.5T SPM-3.5H SFM-3.5H SPM-4HFA-2TAPP APP APP APP APP SBS SBS SBS SBS SBS160 160 160 180 80 160 180 140 140 160MINERAL MODIFIED GRANULES GRANULES MODIFIED MINERAL GRANULES GRANULES GRANULES GRANULESDESIGN BITUMEN BITUMEN DESIGNSPUNBONDTYPE 55SPUNBONDPOLYESTERSPUNBONDPOLYESTERSPUNBONDPOLYESTERNON-WOVENFIBERGLASSSPUNBONDTYPE 55SPUNBONDPOLYESTER 250SPUNBONDPOLYESTERNON-WOVENFIBERGLASSSPUNBONDPOLYESTERVARIOUS BLACK VARIOUS VARIOUS BLACK VARIOUS VARIOUS VARIOUS VARIOUS VARIOUS1.1 0.90 1.1 1.22 0.47 1.1 1.23 1.00 1.00 1.08NONE NONE NONE NONE APS 4T, NONE NONE NONE NONE NONEAPP 4T,APM 4.5TX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH TORCH HOT MOP OR TORCH HOT MOP OR HOT MOP OR HOT MOP ORCOLD ADHESIVECOLD ADHESIVE COLD ADHESIVE COLD ADHESIVETORCH TORCH TORCH TORCH NAILTORCH MOP OR ADHES TORCH MOP OR ADHES MOP OR ADHES MOP OR ADHESDEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OX O X O X O X O X O O X O O O OO O O O O O O O O OO O O O O O O O O OX O X O X O X O X O O X O O O ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 130 40 – 130 40 – 130 40 – 130 40 – 130 30 – 130 30 – 120 30 – 130 30 – 130 30 – 130SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALOR APM OR APM OR SPM-4.5T OR SPF-4.5T OR SPM-4.5T OR SPM-4.5TTORCH TORCH TORCH TORCH HOT MOP OR TORCH HOT MOP HOT MOP HOT MOPOR TORCH OR TORCH OR TORCH OR TORCHNO NO NO NO NO NO NO NO NO NOITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALYUSA USA USA USA USA USA USA USA USA USA1994 1978 1978 1978 1978 1994 1978 1978 1978 19781997 1987 1987 1987 1988 1997 1987 1987 1989 1989> 5,000 > 2 MILLION > 2 MILLION 1 MILLION 100,000 > 5,000 23000 575000< 5,000 > 2 MILLION > 1 MILLION 58000 1800 < 5,000 7000 2 MILLION >600,000 >6,000DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS6 6 6 6 6 6 6 6 6 6YES YES YES YES YES YES YES YES YES YES800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN800/535-8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–859785

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC.2. PRODUCT NAME SPM-4H/250 SPS-3H COMPABASE COMPABASE COMPAFLASH COMPABASEPS-2H FS-2H BFS-2H FS-2H-FR3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 160 120 80 80 80 80Top Surface GRANULES MODIFIED MODIFIED MODIFIED MODIFIED MODIFIEDBITUMEN BITUMEN BITUMEN BITUMEN BITUMENReinforcing MaterialSPUNBONDPOLYESTER 250SPUNBONDPOLYESTERSPUNBONDPOLYESTERNON-WOVENFIBERGLASSSPUNBONDPOLYESTERNON-WOVENFIBERGLASSMATColors VARIOUS MODIFIED BLACK BLACK BLACK BLACKInstalled Weight (lbs./ft 2 without ballast) 1.08 0.73 0.47 0.47 0.47 0.474. KINDS OF FIELD SURFACING REQUIRED NONE COATING OR SPM OR SPM OR ROOF SFM SHEETSASPHALT AND SFM SHEETS SFM SHEETS COATING5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X` FIELD LAP JOINT METHOD HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVEGRAVEL7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHESProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O OMineral Fiber O O O O OPolystyrene O O O O OCellular Glass O O O O OPhenolic O O O O OFiberboard O O O O OPerlite O O O O OPolyisocyanurate O O O O OPolythane O O O O OGypsum O O O O OConcrete O O O O X OWood Plank O O O O OPlywood O O O O X OExisting Built-up Membrane O O O O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 13012. FLASHING MATERIAL SAME SAME SAMEMATERIAL MATERIAL MATERIALOR SPM-4.5TOR SPM-4.5T13. FLASHING METHOD HOT MOP HOT MOP HOT MOPOR TORCH OR TORCH OR COLDADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin ITALY ITALY ITALY ITALY ITALY ITALYManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1978 1978 1978 1978 1978 1978Within USA 1988 1988 1989 198817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA 23000 1800Within USA > 20,000 >575,000 >3,500 >11,000 2300 800018. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 6 6 6 6 6 620. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-859722. FOR TECHNICAL INFORMATION, CONTACT: D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–859723. SEE APPENDIX IF CHECKED86

Modified Bitumen Part 1 - <strong>General</strong> InformationBITEC INC. BITEC INC. BITEC INC. BITEC INC. BITEC INC. CELOTEX CELOTEX CERTAINTEED CERTAINTEED CERTAINTEEDCORP. CORP. ROOFING ROOFING ROOFINGPRODS GROUP PRODS GROUP PRODS GROUPSFM-3.5H-FR SFM-4H-FR FS-2H PLUS FS-25 FS-40 CELOTEX APP CELOTEX APP FLINTLASTIC FLINTLASTIC GTA BLACK4/S 4/M STA PLUS 5.0 GTA DIAMOND ANDCAP SHEET CAP SHEET WHITE DIAMONDSBS SBS SBS SBS SBS APP APP APP APP APP140 160 88 40 60 157 157 200 180 160GRANULES GRANULES MODIFIED MODIFIED MODIFIED SMOOTH GRANULAR ALUMINUM GRANULE FINE CERAMICBITUMEN BITUMEN BITUMEN PARTICLESNON-WOVENFIBERGLASSMATNON-WOVENFIBERGLASSNON-WOVENFIBERGLASSNON-WOVENFIBERGLASSNON-WOVENFIBERGLASSVARIOUS VARIOUS BLACK BLACK BLACK BLACK BLACK ORWHITEPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTERBLACK WHITE / BLACK /BROWN / TAN/GRAY / OTHERBLACK DIAMOND/ WHITEDIAMOND1.00 1.05 0.6 0.25 0.4 1.03 1.13 1 1.05 0.95NONE NONE SPM OR SPM OR SPM OR COATINGS / NONE REFLECTIVE NONE NONESPM SHEETS SPM SHEETS SPM S HEETS EMULSIONS COATINGX X X X X X X X X XX X X X X X X X X XHOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR TORCH TORCH TORCH TORCH TORCHCOLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVEMOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES TORCH TORCH TORCH TORCH TORCHPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O X O X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 120 30 – 120 30 – 130 30 – 130 30 – 130SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALHOT MOP HOT MOP TORCH TORCH TORCH TORCH TORCHNO NO NO NO NO NO NO NONE NO NOITALY ITALY ITALY ITALY ITALY USA USA ITALY UKUSA USA USA USA USA USA USA USA USA USA1978 1978 1978 1978 1978 1965 1963 19781989 1989 1988 1988 1988 1983 1983 1997 1986 198758000 52000 >58,000 >58,000 >58,000 MILLIONS MILLIONSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRS,DIRECT DISTRS,DIRECT DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS6 6 6 6 6 6 6 2 2 2YES YES YES YES YES YES YES YES YES YES800/535-8597 800/535-8597 800/535-8597 800/535-8597 800/535-8597 REG. OFFICE REG. OFFICE SEE SEE SEE800/CELOTEX 800/CELOTEX APPENDIX APPENDIX APPENDIXD. ALLEN D. ALLEN D. ALLEN D. ALLEN D. ALLEN REG. OFFICE REG. OFFICE800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/535–8597 800/CELOTEX 800/CELOTEX 972/580-5600 972/580-5600 972/580-5600X X X X X87

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEEDROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGPRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP2. PRODUCT NAME FLINTLASTIC FLINTLASTIC FLINTLASTIC FLINTLASTIC FLINTLASTIC FLINTLASTICGTA-FR GTS GMS GMS PREMIUM FR-P FR-PPREMIUM3. PRODUCT DESCRIPTIONType of Modifier APP SBS SBS SBS SBS SBSThickness (mils) 180 180 160 180 160 180Top Surface GRANULE GRANULE GRANULE GRANULE GRANULE GRANULEReinforcing Material POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERColors WHITE WHITE WHITE / BLACK / WHITE WHITE WHITEInstalled Weight (lbs./ft 2 without ballast) 1.05 1.22BROWN / TAN /OTHER 1.00 1.05 1.08 1.054. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH TORCH HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD ADHESVIE COLD ADHESVIE COLD ADHESVIE COLD ADHESVIE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) TORCH TORCH MOP/COLD ADH MOP/COLD ADH MOP/COLD ADH MOP/COLD ADHProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O O OMineral Fiber O O O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard O O O O O OPerlite O O O O O OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete O O O O O OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane X O X O X O X O X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 13012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH HOT MOP HOT MOP HOT MOP HOT MOPOR COLD OR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin USA ITALY ITALY USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1978 1972Within USA 1996 1986 1980 1989 1989 198917. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA >100,000 >100,000Within USA MILLIONS MILLIONS 20000018. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 2 2 2 2 2 220. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SEE SEE SEE SEE SEE SEE22. FOR TECHNICAL INFORMATION, CONTACT:APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-560023. SEE APPENDIX IF CHECKED X X X X X X88

Modified Bitumen Part 1 - <strong>General</strong> InformationCERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED CERTAINTEED DANOSA DANOSAROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFING CARIBBEAN CARIBBEANPRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP PRODS GROUP INC. INC.FLINTLASTIC FLINTLASTIC FLINTLASTIC POLY SMS BLACK FLEXIGLAS FLEXIGLAS FLINTLASTIC ESTERDAN RM GLASDANFR PG FR BASE FR CAP BASE SHEET DIAMOND BASE SHEET PREMIUM STA AL-80SHEET BASE SHEET CAP 960SBS SBS SBS SBS SBS SBS SBS APP SBS SBS180 92 140 120 50 160 160 140 140GRANULE GRANULE GRANULE SAND GRANULE SAND GRANULES ALUMINUM MINERAL ALUMINUMGRANULESPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASS POLYESTER POLYESTER GLASS FIBERWHITE VARIOUS VARIOUS BLACK BLACK BLACK WHITE BLACK WHITE / OTHER ALUMINUM1.00 0.60 0.90 .045 .038 0.30 0.90 0.90 0.83 0.77NONE CAP SHEET NONE CAP SHEET CAP SHEET CAP SHEET NONE REFLECTIVE NONE NONECOATINGX X X X X X X X X XX X X X X X X X X XHOT MOP OR MECHANICAL, HOT MOP OR MECHANICAL, SELF-ADHESIVE MECHANICAL, HOT MOP OR TORCH HOT MOP OR TORCHCOLD ADHESVIE HOT MOP OR COLD ADHESIVE HOT MOP OR HOT MOP OR COLD ADHESIVE TORCHCOLD ADHESIVE COLD ADHESIVE COLD ADHESIVEMOP/CLD ADH MECH/MOP/CLD AD MECH.MOP/COLD ADH MOP/COLD ADH MOP/COLD ADH MOP/COLD ADH SELF-ADHERED MOP/CLD ADHS MOP/CLD ADH TORCH MOP OR TORCH MOP OR TORCHPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN DEAD LEVEL DEAD LEVELO X O X X X O O X XO X O X X X O O X XO X O X X X O O O OO X O X X X O O X O X OO X O X X X O O X O X OO X O X X X O O O OO X O X X X O O O OO X O X X X O O O OO X O X X X O O O OO X O X X X O O O OO X O X X X O O X XO X O X O X O O X O X OO X O X O X O O X O X OX O X X O X O X O X O X O ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 14 – 120 14 – 120SAME ANY SBS SAME ANY SBS FLINTLASTIC ANY FLINTLASTIC SAME SAME SAME SAMEMATERIAL CAP SHEET MATERIAL CAP SHEET STA, GTA, GMS CAP SHEET MATERIAL MATERIAL MATERIAL OR MATERIAL ORGLASDANAL-80ESTERDAN RMHOT MOP HOT MOP HOT MOP HOT MOP TORCH, MOP TORCH, MOP HOT MOP TORCH HOT MOP HOT MOPOR COLD OR COLD OR COLD OR COLD OR COLD OR COLD OR COLD OR TORCH OR TORCHADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVENO NO NO NO NO NO NO NO NO NOUSA USA USA USA USA USA ITALY PUERTO RICO PUERTO RICOUSA USA USA USA USA USA USA USA PUERTO RICO PUERTO RICO19781989 1989 1989 1989 1989 1990 1997 1980 1979 19791,200,000 MILLIONS MILLIONSMILLIONS 100000 100000 40000 50000 MILLIONS THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRS,DIRECT DISTRS,DIRECT2 2 2 2 2 2 2 2 2 2YES YES YES YES YES YES YES YES YES YESSEE SEE SEE SEE SEE SEE SEE EAST: 927/580-5604 W. RIVERA W. RIVERAAPPENDIX APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX WEST: 510/606-7434972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-5600 972/580-5600X X X X X X X XF. ROMERO F. ROMERO89

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME DANOSA DANOSA DANOSA DANOSA DANOSA DANOSACARIBBEAN CARIBBEAN CARIBBEAN CARIBBEAN CARIBBEAN CARIBBEANINC. INC. INC. INC. INC. INC.2. PRODUCT NAME GLASDAN GLASDAN GLASDAN GLASDAN ESTERDAN ESTERDANR-36 AL-80-3 RM RM-5 RM-5 RM-PLUS3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 140 120 140 173 177 197Top Surface BITUMEN ALUMINUM MINERAL MINERAL MINERAL MINERALGRANULES GRANULES GRANULES GRANULESReinforcing Material SMOOTH GLASS FIBER GLASS FIBER GLASS FIBER POLYESTER POLYESTERColors BLACK ALUMINUM WHITE / OTHER WHITE / OTHER WHITE / OTHER WHITE / OTHERInstalled Weight (lbs./ft 2 without ballast) 0.77 0.72 0.83 1.05 1.07 1.194. KINDS OF FIELD SURFACING REQUIRED COATING NONE NONE NONE NONE NONEBALALST5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP OR TORCH HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORTORCH TORCH TORCH TORCH TORCH7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) MOP OR TORCH MOP OR TORCH MOP OR TORCH MOP OR TORCH MOP OR TORCH MOP OR TORCHProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X XMineral Fiber X X X X X XPolystyrene O O O O O OCellular Glass X O X O X O X X O X OPhenolic X O X O X O O X O X OFiberboard O O O O O OPerlite O O O X O X OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X X X X XWood Plank X O X O X O X O X OPlywood X O X O X O X O X OExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 14 – 120 14 – 120 14 – 120 14 – 120 14 – 120 14 – 12012. FLASHING MATERIAL GLASD AL-80 SAME SAME SAME SAME SAMEOR MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL ORESTERDAN RM ESTERDAN RM GLASDANAL-80 ESTERDAN RM GLASDANAL-80 GLASDANAL-8013. FLASHING METHOD HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOPOR TORCH OR TORCH OR TORCH OR TORCH OR TORCH OR TORCH14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICOManufacture PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICO PUERTO RICO16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1979 1988 1988 1988 1985 199517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA MILLIONS MILLIONS MILLIONS MILLIONS MILLIONSWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 2 2 2 2 2 220. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: W. RIVERA W. RIVERA W. RIVERA W. RIVERA W. RIVERA W. RIVERA22. FOR TECHNICAL INFORMATION, CONTACT: F. ROMERO F. ROMERO F. ROMERO F. ROMERO F. ROMERO F. ROMERO23. SEE APPENDIX IF CHECKED90

Modified Bitumen Part 1 - <strong>General</strong> InformationDERMABIT DERMABIT DERMABIT DERMABIT DIBITEN DIBITEN DIBITEN ECOLOGY ECOLOGY ECOLOGYWATERPROOFING WATERPROOFING WATERPROOFING WATERPROOFING ROOF ROOF ROOFINDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES SYSTEMS SYSTEMS SYSTEMSDERMABIT DERMABIT ELASPHALT ELASPHALT DIBITEN DIBITEN DIBITEN ERS - 501 ERS - 503 ERS - 5024170 4170 4170 4170 POLY/4 POLY/4.5 POLY/5SMOOTH GRANULE SMOOTH GRANULE GRANULARAPP APP SBS SBS APP APP APP SBS/SEBS SBS/SEBS SBS/SEBS160 160 160 160 160 180 200 130 135 160SMOOTH GRANULE SMOOTH GRANULE MODIFIED SLATE FLAKES MODIFIED SMOOTH SMOOTH GRANULESBITUMENBITUMENPOLYESTER POLYESTER POLYESTER POLYESTER NON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERPOLYESTER POLYESTER POLYESTERBLACK VARIOUS BLACK VARIOUS BLACK VARIOUS BLACK BLACK BLACK UNLIMITED0.88 0.95 0.88 0.95 0.90 1.05 1.10 90 100 100NONE NONE COATING NONE NONE NONE NONE GRAVEL / GRAVEL / NONEGRANULES GRANULESX X X X X X X X X XX X X X X X X X X XTORCH TORCH HOT MOP OR HOT MOP OR TORCH TORCH TORCH HOT/COLD HOT / COLD HOT/ COLDTORCH TORCH4 4TORCH TORCH MOP OR TORCH MOP OR TORCH TORCH TORCH TORCH X X XDEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINO O O O O O O X X XO O O O O O O X X XO O O O O O O O O OO O O O O O O O O OO O O O O O OO O O O O O O X X XO O O O O O O X X XO O O O O O O O O OO O O O O O O O O OX X X O X O O O O O O OX X X X X O X O X O X O X O X OO O X O X O O O O X O X O X OO O X O X O O O O X O X O X OX X X X X O X O X O O O ONONE NONE NONE NONE SEE SPECS SEE SPECS SEE SPECS NONE NONE NONE20 – 140 20 – 140 0 – 120 0 – 120 40 – 120 40 – 120 40 – 120 40 - 100 40 - 100 40 - 100SAME SAME SAME SAME SAME DIBITEN SAME SAME SAME SAMEMATERIAL OR MATERIAL MATERIAL OR MATERIAL OR MATERIAL POLY/4 MATERIAL MATERIAL MATERIAL MATERIALGRANULATED GRANULATED GRANULATEDTORCH TORCH TORCH TORCH TORCH TORCH TORCH HOT MOP / HOT MOP / HOT MOP /OR MOP OR MOP MODIFIED MODIFIED MODIFIEDBITUMEN BITUMEN BITUMENNO NO NO NO NO NO NO YES YES YESSA/ITALY SA/ITALY SA/ITALY SA/ITALY ITALY ITALY ITALY USA USA USASA/ITALY SA/ITALY SA/ITALY SA/ITALY USA USA USA USA USA USA1976 1976 1976 1976 1968 1968 19681987 1987 1987 1987 1978 1978 1978 1988 1988 19883.5 MILLION 1.5 MILLION 200,000 300,000 10.7 MILLION 900,000 100,000200,000 100,000 4.6 MILLION 1.3 MILLION 200,000DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DIRECT DIRECT DIRECT1 1 1 1 9 9 9 6 6 6YES YES YES YES YES YES YES YES YES YESG. JERMSTAD G. JERMSTAD G. JERMSTAD G. JERMSTAD R. BIANCHI DISTRICT DISTRICT REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICEG. JERMSTAD G. JERMSTAD G. JERMSTAD G. JERMSTAD D. CARL D. CARL D. CARL TECHNICAL TECHNICAL TECHNICALSERVICE SERVICE SERVICEX X X X X X X91

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME ECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGYROOF ROOF ROOF ROOF ROOF ROOFSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS2. PRODUCT NAME ERS - 504 ERS - 505 ERS - 507 ERS - 600 ERS - 601 ERS - 6023. PRODUCT DESCRIPTIONType of Modifier SBS/SEBS SBS/SEBS SBS/SEBS APP APP SBS/SEBSThickness (mils) 160 120 115 160 180 160Top Surface GRANULES GRANULES GRANULES SMOOTH GRANULES SMOOTHReinforcing Material POLYESTER FIBERGLASS FIBERGLASS POLYESTER POLYESTER POLYESTER /FIBERGLASSColors UNLIMITED UNLIMITED UNLIMITED BLACK WHITE BLACKInstalled Weight (lbs./ft 2 without ballast) 110 90 85 90 112 1054. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE GRAVEL / NONE GRAVEL /GRANULESGRANULES5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT / COLD HOT / COLD HOT / COLD TORCH TORCH TORCH7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 ) 4Partially Adhered (method)Fully Adhered (method) X X X X X XProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X XMineral Fiber X X X X XPolystyrene O O O O OCellular Glass O O O O OPhenolic O O O O OFiberboard X X X X XPerlite X X X X XPolyisocyanurate O O O O OPolythane O O O O OGypsum O O O O OConcrete X O X O X O X O X OWood Plank X O X O X O X O X OPlywood X O X O X O X O X OExisting Built-up Membrane O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 - 100 40 - 100 40 - 100 40 -1 00 40 -1 0012. FLASHING MATERIAL SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD HOT MOP / HOT MOP / HOT MOP / MODIFIED MODIFIEDMODIFIED MODIFIED MODIFIED BITUMEN BITUMENBITUMEN BITUMEN BITUMEN14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USAManufacture USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1988 1988 1988 1988 198817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 6 6 6 6 620. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: REGIONAL REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICALSERVICE SERVICE SERVICE SERVICE SERVICE23. SEE APPENDIX IF CHECKED92

Modified Bitumen Part 1 - <strong>General</strong> InformationECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGY FIRESTONE FIRESTONE FIRESTONE FIRESTONEROOF ROOF ROOF ROOF ROOF ROOF BUILDING BUILDING BUILDING BUILDINGSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO.ERS - 603 ERS - 604 ERS - 605 ERS - 607 ERS - 703 ERS - 601 FR APP160 APP170 APP180 APP180 FRSBS/SEBS SBS/SEBS SBS/SEBS APP SBS/SEBS APP APP APP APP APP170 170 45 80 150 180 150 165 170 170GRANULE GRANULE SMOOTH GRANULE ALUMINUM GRANULES SMOOTH SMOOTH GRANULES GRANULESSHEETPOLYESTER /FIBERGLASSPOLYESTER /FIBERGLASSPOLYESTER POLYESTER FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERUNLIMITED UNLIMITED BLACK WHITE ALUMINUM /GOLD / COPPERWHITE BLACK BLACK VARIOUS VARIOUS115 115 80 80 101 112 0.82 0.90 1.02 1.06NONE NONE GRAVEL / NONE NONE NONE NONE NONE NONE NONEGRANULESX X X X X X X X X XX X X X X X X X X XTORCH TORCH HOT / COLD TORCH HOT / TORCH TORCH TORCH TORCH TORCH TORCH4X X X X X X TORCH TORCH TORCH TORCHX X X XPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINX X X X X X O O O OX X X X X X O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OX X X X X X O O O OX X X X X X O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OX O X O X O X O X O X O X X X XX O X O X O X O X O X O O O OX O X O X O X O X O X O O O O OO O O O O O X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 -1 00 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 0 – 130 0 – 130 0 – 130 0 – 130SAME SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALMODIFIED MODIFIED HOT MOP / MODIFIED HOT MOP / MODIFIED TORCH TORCH TORCH TORCHBITUMEN BITUMEN MODIFIED BITUMEN MODIFIED BITUMENBITUMENBITUMENYES YES YES YES YES YES NO NO NO NOUSA USA USA USA USA USA ITALY ITALY USA USAUSA USA USA USA USA USA USA USA USA USA1965 19651988 1988 1988 1988 1988 1988 1980 1980 1989 1993MILLIONS MILLIONS MILLIONSMILLIONS MILLIONS MILLIONS THOUSANDSDIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT6 6 6 6 6 6 5 5 5 5YES YES YES YES YES YES YES YES YES YESREGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL 800/428–4442 800/428–4442 800/428–4442 800/428–4442OFFICE OFFICE OFFICE OFFICE OFFICE OFFICETECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL 800/428–4511 800/428–4511 800/428–4511 800/428–4511SERVICE SERVICE SERVICE SERVICE SERVICE SERVICE93

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONEBUILDING BUILDING BUILDING BUILDING BUILDING BUILDINGPRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO.2. PRODUCT NAME SBS BASE SBS PREMIUM SBS SMOOTH SBS SBS FR SBS PREMIUMSHEET BASE SHEET3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 90 90 145 150 150 160Top Surface SMOOTH SMOOTH SMOOTH GRANULES GRANULES GRANULESReinforcing Material FIBERGLASS FIBERGLASSMAT/SCRIMPOLYESTER POLYESTER POLYESTER POLYESTERColors BLACK BLACK BLACK VARIOUS VARIOUS VARIOUSInstalled Weight (lbs./ft 2 without ballast) 0.54 0.55 0.86 0.91 0.91 1.014. KINDS OF FIELD SURFACING REQUIRED SBS CAP SBS CAP FLOOD COAT / NONE NONE NONEGRAVEL5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD MOP OR MOP OR MOP OR MOP OR MOP OR MOP ORWELD WELD WELD WELD WELD WELD7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) HOT MOP HOT MOPFully Adhered (method) MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHES MOP OR ADHESProtected Roof Membrane Assembly X X X X X X8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X O O O OMineral Fiber X X O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard X X O O O OPerlite X X O O O OPolyisocyanurate X O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X O O O OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 30 – 100 30 – 100 30 – 130 30 – 130 30 – 130 30 – 13012. FLASHING MATERIAL SBS FLASHING SBS FLASHING SBS FLASHING SBS FLASHING SBS FLASHINGQ SBS FLASHING13. FLASHING METHOD HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1965 1965Within USA 1990 1993 1991 1989 1994 199117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 5 5 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–444222. FOR TECHNICAL INFORMATION, CONTACT: 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–451123. SEE APPENDIX IF CHECKED94

Modified Bitumen Part 1 - <strong>General</strong> InformationFIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE GAF GAF GAF GAFBUILDING BUILDING BUILDING BUILDING BUILDING BUILDING MATERIALS MATERIALS MATERIALS MATERIALSPRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. PRODUCTS CO. CORP. CORP. CORP. CORP.SBS PREMIUM SBS TORCH SBS FLASHING SBS GLASS SBS POLY SBS FR RUBEROID RUBEROID RUBEROID RUBEROIDFR TORCH BASE TORCH BASE TORCH TORCH TORCH TORCH TORCH FR(SMOOTH) (GRANULE) PLUSSBS SBS SBS SBS SBS SBS APP APP APP APP160 150 150 120 120 175 160 160 197 197GRANULES GRANULES GRANULES GRANULES GRANULES GRANULES SMOOTH GRANULES GRANULES GRANULESPOLYESTER POLYESTER POLYESTER FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERVARIOUS VARIOUS VARIOUS BLACK BLACK VARIOUS BLACK WHITE/BLACK WHITE/BLACK WHITE/BLACK1.01 0.93 0.91 0.82 0.82 1.2 0.80 1.05 1.25 1.1NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XMOP OR TORCH MOP OR MOP OR MOP OR MOP OR TORCH TORCH TORCH TORCHWELD WELD WELD WELD WELDTORCH TORCH TORCH TORCHMOP OR ADHES TORCH MOP OR ADHES TORCH TORCH TORCH TORCH TORCH TORCH TORCHX X X X X X X X X XPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAINO O O O O O O O O OO O O O O O O O O OO O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O X O X O X O X OO O O O O O O O O OO O O O O O O O O OO O O O O O X O X O X O X ONONE NONE NONE NONE NONE NONE CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 30 – 130 40 – 100 40 – 100 40 – 100 40 - 100SBS FLASHING SAME SAME SBS FLASHING SBS FLASHING SBS FLASHING SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALHOT MOP TORCH HOT MOP HOT MOP HOT MOP HOT MOP TORCH TORCH TORCH TORCHNO NO NO NO NO NO YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1992 1994 1994 1995 1995 1995 1985 1986 1988 1989THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT5 5 5 5 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YES800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE800/766-3411 800/766-3411 800/766-3411 800/766-341195

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME GAF GAF GAF GAF GAF GAFMATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALSCORP. CORP. CORP. CORP. CORP. CORP.2. PRODUCT NAME RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID 20TORCH 1 MOP MOP FR MOP MOP 170 FRPLUS (GRANULE)3. PRODUCT DESCRIPTIONType of Modifier APP SBS SBS SBS SBS SBSThickness (mils) 177 197 160 160 160 82Top Surface GRANULES GRANULES GRANULES GRANULES GRANULES SMOOTHReinforcing Material POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASSColors BLACK / WHITE /BURNT SIENNAWHITE / BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACK BLACKInstalled Weight (lbs./ft 2 without ballast) 1.02 0.9 0.9 0.9 1.05 0.654. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE NONE CAP SHEET5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD COLD COLD COLD COLD7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) TORCH HOT MOP HOT MOP HOT MOP HOT MOP HOT MOPFully Adhered (method) TORCH HOT MOP/COLD HOT MOP/COLD HOT MOP/COLD HOT MOP/COLD HOT MOP/COLDProtected Roof Membrane Assembly X X X X X X8. MINIMUM SLOPE REQUIRED MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O O OMineral Fiber O O O O O OPolystyrene O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard O O O O O XPerlite O O O O O XPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X O O O O O OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane X O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF11. WORKABLE TEMPERATURE RANGE (degrees F) 40 – 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 10012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH HOT MOP OR MOD HOT MOP OR MOD HOT MOP OR MOD HOT MOP OR MOD HOT MOP OR MODBIT FLASHING BIT FLASHING BIT FLASHING BIT FLASHING BIT FLASHINGCEMENT CEMENT CEMENT CEMENT CEMENT14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES NO NO15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1997 1988 1989 1986 1989 199217. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 5 5 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-341123. SEE APPENDIX IF CHECKED96

Modified Bitumen Part 1 - <strong>General</strong> InformationGAF GAF GAF GAF GAF GAF GAF GAF GAF GAFMATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALSCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.RUBEROID 30 RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID MODIFIED MODIFIED30 FR MOP SBS HW SBS HW SBS HW SBS HW SBS HW BASE SHEET CAP SHEET(SMOOTH) (SMOOTH) (GRANULE) (FR) (PLUS) (PLUS FR) 601+SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS130 130 160 140GRANULES GRANULES SMOOTH SMOOTH GRANULES GRANULES GRANULES GRANULES SMOOTH GRANULESFIBERGLASS FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASSWHITE / BLACK WHITE / BLACK BLACK BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACK BLACK WHITE0.92 0.92 0.9 0.9NONE NONE CAP SHEET CAP SHEET NONE NONE NONE NONE CAP SHEET NONEX X X X X X X X X XX X X X X X X X X XHOT MOP OR HOT MOP OR HOT MOP OR TORCH TORCH TORCH TORCH TORCH HOT MOP OR HOT MOP ORCOLD COLD COLD COLD COLDHOT MOP HOT MOP HOT MOP TORCH TORCH TORCH TORCH TORCH HOT MOP HOT MOPHOT MOP/COLD HOT MOP/COLD HOT MOP/COLD TORCH TORCH TORCH TORCH TORCH HOT MOP/COLD HOT MOP/COLDX X X X X X X X X XMUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAIN MUST DRAINO O O O O O O O OO O O O O O O O O OO O O O OO O O O O O O O O OO O O O O O O OO O X O O O O O X OO O X O O O O O X OO O O O O O O O OO O O O O O O O O OO O O O O O X X X OO O X X X X O O X OO O O O O O O O X OO O O O O O O O X OO O O X X X X X X OCONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF CONTACT GAF40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100 40 - 100SAME SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALHOT MOP OR HOT MOP OR HOT MOP OR MOD TORCH TORCH TORCH TORCH TORCH HOT MOP OR MOD HOT MOP OR MODFLASHING FLASHING BIT FLASHING BIT FLASHING BIT FLASHINGCEMENT CEMENT CEMENT CEMENT CEMENTNO NO YES NO NO NO NO NO NO NOUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1992 1992 1986 1997 1997 1997 1997 1997 1996 1997DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT5 5 5 5 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YESREGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICETECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-3411 800/766-341197

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME GAF ICA, INC. ICA, INC. ICA, INC. IKO IKOMATERIALS INDUSTRIES INDUSTRIESCORP.2. PRODUCT NAME ULTRACLAD ICA PREMIUM ICA PREMIUM ICA PREMIUM ARMOURPLAST ARMOURPLASTSBS APP SMOOTH APP MINERAL APP SLATE CLASSIC GRANULAR3. PRODUCT DESCRIPTIONType of Modifier SBS APP APP APP APP APPThickness (mils) 145 160 180 180 150 157Top Surface FOIL FACE SMOOTH MINERAL SLATE FLAKES MOD BIT GRANULARGRANULESReinforcing Material FIBERGLASS NON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTER180-GRAMPOLYESTER180-GRAMPOLYESTERColors COPPER /ALUMIMUMBLACK VARIOUS VARIOUS BLACK VARIOUSInstalled Weight (lbs./ft 2 without ballast) 0.9 1.05 1.05 0.80 0.884. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE ROOF COAT NONEGRANULES /5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP OR TORCH TORCH TORCH TORCH TORCHHEAT WELDGRAVEL7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) TORCH TORCHFully Adhered (method) HOT MOP/TORCH COLD ADHES COLD ADHES COLD ADHES TORCH TORCHProtected Roof Membrane Assembly TORCH TORCH TORCH8. MINIMUM SLOPE REQUIRED MUST DRAIN POS DRAIN POS DRAIN POS DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O O OMineral Fiber O O O O O OPolystyrene O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard O O O O O OPerlite O O O O O OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete O X X X X XWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O O O X X10. RESTRICTED REGIONS (refer to manufacturer's literature) CONTACT GAF SEE SPECS SEE SPECS SEE SPECS NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 - 100 40 – 120 40 – 120 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL M,ATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH TORCH TORCH TORCH TORCH14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NONE YES YES YES NO NO15. COUNTRY OF:Origin USA USA USA USA/BELGIUM USA/BELGIUMManufacture USA USA USA USA CANADA CANADA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1979 1979Within USA 1997 1997 1997 1997 1988 198817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTR,DIRECT DISTR,DIRECT DISTR,DIRECT DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 5 4 4 420. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: REGIONALOFFICE 800/352-7002 800/352-7002 800/352-7002 800/323–7171 800/323–717122. FOR TECHNICAL INFORMATION, CONTACT: TECHNICALSERVICES 800/352-7002 800/352-7002 800/352-7002 800/323–7171 800/323–717123. SEE APPENDIX IF CHECKED98

Modified Bitumen Part 1 - <strong>General</strong> InformationIKO IKO IKO IKO IKO IKO IKO IKO IKO IKOINDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIESMODIFLEX MODIFLEX TORCHFLEX TORCHFLEX TORCHFLEX MODIFLEX MODIFLEX MODIFLEX MODIFLEX TORCHFLEXMP-180-CAP MP-250-CAP TP-180-CAP TP-250-CAP TP-250- MF-95-SS- BASE MF-95-FS-BASE MP-180-FS- MP-180-SS- TF-95-FF-BASECAP/5 BASE BASESBS SBS SBS SBS SBS SBS SBS SBS SBS SBS138 165 157 157 197 87 87 87 87 118GRANULAR GRANULAR GRANULAR GRANULAR GRANULAR SAND SAND SAND SAND FILM180-GRAMPOLYESTER250-GRAMPOLYESTER180-GRAMPOLYESTER250-GRAMPOLYESTER250-GRAMPOLYESTER90-GRAMFIBERGLASS90-GRAMFIBERGLASS180-GRAMPOLYESTER180-GRAMPOLYESTER90-GRAMFIBERGLASSVARIOUS VARIOUS VARIOUS VARIOUS VARIOUS BLACK BLACK BLACK BLACK BLACK0.79 0.96 0.97 0.97 1.19 0.53 0.52 0.51 0.51 0.74NONE NONE NONE NONE NONE MODIFLEX TORCHFLEX TORCHFLEX MODIFLEX TORCHFLEXCAP CAP CAP CAP CAPX X X X X X X X X XX X X X X X X X X XHOT MOP HOT MOP TORCH TORCH TORCH HOT MOP HOT MOP HOT MOP HOT MOP TORCHOR COLD OR COLD OR COLD TORCH TORCH OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVETORCH TORCH TORCHTORCH TORCH TORCH MOP OR ADHES. MOP, TORCH MOP, TORCH MOP OR ADHES. TORCH1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAINO O O O O X X X OX XO O O O O X X X X XO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O X OX X X XO O O O O O O O O OO O O O O O O O O OX X X X X X X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 35 -120 0 - 120 0 - 120 35 - 120 0 - 120SAME SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALHOT MOP HOT MOP TORCH TORCH TORCH HOT MOP HOT MOP HOT MOP HOT MOP TORCHOR COLD OR COLD OR OR OR ORADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVENO NO NO NO NO NONE NONE NONE NONE NONEUSA USA USA USA CANADA/ USA CANADA/ USA CANADA/ USA CANADA/ USA CANADA/ USA CANADA/USACANADA CANADA CANADA CANADA CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADA/USADISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORSYES YES YES YES YES YES YES YES YES NO800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–717199

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME IKO IKO IKO IKO IKO IKOINDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES INDUSTRIES2. PRODUCT NAME TORCHFLEX TORCHFLEX ARMOURBOND ARMOURBOND ARMOUR ARMOURGARDTF-95-FF- TP-180-FF-BASE 95 180 BRIDGE/PONT ICE & WATERBASE (22)3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 87 118 98 118 217 71Top Surface FILM FILM FILM FILM GRANULAR SANDReinforcing Material90-GRAMFIBERGLASS180-GRAMFIBERGLASS90-GRAMFIBERGLASS180-GRAMPOLYESTER180-GRAMPOLYESTER59-GRAMFIBERGLASSColors BLACK BLACK BLACK BLACK BLACK GRAY GREENInstalled Weight (lbs./ft 2 without ballast) 0.54 0.71 0.58 0.69 1.33 0.384. KINDS OF FIELD SURFACING REQUIRED TORCHFLEX TORCHFLES ARMOURPLAST ARMOURPLAST NONE SHINGLES MOD /CAP CAP T-FLEX MOP / TORCH TORCH CAP5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH TORCH TORCH TORCH TORCH SELF-ADHERECAPCAP7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) TORCH TORCH TORCH TORCH TORCH TORCHProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN 1/4" OR P. DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X O O O OMineral Fiber X X O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard O O O O O OPerlite O O O O O OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X X X O X OWood Plank O O O O O OPlywood O O X X O X OExisting Built-up Membrane X X O O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 - 120 0 - 120 40 - 120 40 - 120 40 - 120 40 - 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH SELF-ADHERE SELF-ADHERE TORCH SELF-ADHERE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NONE NONE NONE NONE NONE NONE15. COUNTRY OF:Origin CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADAManufacture CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADA/USA CANADA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA17. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS20. LICENSED APPLICATOR AGREEMENT (yes/no) NO NO NO NO NO NO21. FOR SALES INFORMATION, CONTACT:800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–717122. FOR TECHNICAL INFORMATION, CONTACT:800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–7171 800/323–717123. SEE APPENDIX IF CHECKED100

Modified Bitumen Part 1 - <strong>General</strong> InformationIKO IKO JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLEINDUSTRIES INDUSTRIES INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONALINC. INC. INC. INC. INC. INC. INC. INC.ARMOUR MF-95-CAP DYNAKAP DYNAKAP FR DYNAGLAS DYNAPLY DYNAGLAS FR DYNALASTIC DYNALASTIC DYNALASTICTREAD 15 250 180 180 FRSBS SBS SBS SBS SBS SBS SBS SBS SBS SBS275 138 160 160 150 125 150 158 150 150GRANULES GRANULES GRANULE GRANULE GRANULE SAND GRANULE GRANULE GRANULE GRANULEFIBERGLASS FIBERGLASS FIBERGLASS &POLYESTERFIBERGLASS &POLYESTERFIBERGLASSFIBERGLASS &POLYESTERFIBERGLASS POLYESTER POLYESTER POLYESTERCHARCOALGRAYVARIOUS WHITE / BLACK WHITE / BLACK WHITE / BLACK BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACK191 923 1.10 1.10 0.88 0.78 0.88 0.96 0.88 0.88NONE NONE NONE NONE ASPHALT AND NONE NONE NONE NONEGRAVELX X X X X X X X XX X X X X X X X XN/A HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOPOR COLD OR COLD OR COLD OR COLD OR COLD OR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEHOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLDX X X X X X1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"X X X X X X X XO O O O O O O OO O O O O O O OO O O O O O O OX X X X X X X XX X X X X X X XO O O O O O O OO O O O O O O OX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XO O O O O O O ONONE NONE NONE NONE NONE NONE NONE NONE40 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEXHOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORMEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANEFLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENTNO NO NO NO NO NO NO NOCANADA CANADA USA USA USA USA USA USA USA USACANADA CANADA USA USA USA USA USA USA USA USA1983 1986 1987 1987 1988 1995 1993 1994MILLIONS MILLIONS MILLIONS 100,OOO MILLIONS 10,000 THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS5 5 5 5 5 5 5 5NO NO YES YES YES YES YES YES YES YESDIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE800/323–7171 800/323–7171GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE800/323–7171 800/323–7171 SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES101

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLEINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONALINC. INC. INC. INC. INC. INC.2. PRODUCT NAME DYNAGLAS DYNABASE DYNALASTIC DYNALASTIC DYNAMAX DYNAMAX FR30 FR 180 S 250 FR3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 130 100 118 160 160 160Top Surface GRANULE GRANULE GRANULE GRANULE GRANULE GRANULEReinforcing Material FIBERGLASS FIBERGLASS POLYESTER POLYESTER FIBERGLASSPOLYESTERFIBERGLASSPOLYESTERColors WHITE / BLACK BLACK BLACK WHITE / BLACK WHITE / BLACK WHITE / BLACKInstalled Weight (lbs./ft 2 without ballast) 0.78 0.58 0.8 1.06 1.16 1.16KINDS OF FIELD SURFACING REQUIRED NONE CAP SHEET CAP SHEET NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP HOT MOPOR COLD OR COLD OR COLD OR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLD HOT OR COLDProtected Roof Membrane Assembly X X8. MINIMUM SLOPE REQUIRED 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X XMineral Fiber O O O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolicFiberboard X X X X X XPerlite X X X X X XPolyisocyanurate O O O O O OPolythane O O O O O OGypsum X X X X X XConcrete X X X X X XWood Plank X X X X X XPlywood X X X X X XExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 12012. FLASHING MATERIAL DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX DYNAFLEX13. FLASHING METHOD HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD FLASHING MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANECEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT FLASH CEMENT14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1993 1987 1979 1996 1995 199517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 5 5 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: DIST OFFICE REGIONAL REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEESERVICES SERVICES SERVICES SERVICES SERVICES SERVICES23. SEE APPENDIX IF CHECKED102

Modified Bitumen Part 1 - <strong>General</strong> InformationJOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE JOHNS MANVILLE MALARKEYINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL ROOFINGINC. INC. INC. INC. INC. INC. INC. INC. INC. CO.APPEX 4S TRICOR-M FR TRICOR BICOR APPEX 4.5M APPEX 4.5M DYNAWELD DYNAWELD BASE DYNACLAD APPFR CAP FR 159APP APP APP APP APP APP SBS SBS SBS APP160 180 160 160 160 160 160 120 160 159SMOOTH MINERAL SMOOTH SMOOTH MINERAL MINERAL GRANULES SAND METAL FOIL SMOOTHPOLYESTERLAMINATEDGLASS FIBER /POLYESTERLAMINATEDGLASS FIBER /POLYESTERFIBERGLASS POLYESTER POLYESTER GLASS GLASS GLASS SCRIM FIBERGLASSBLACK GRAY / WHITE BLACK BLACK GRAY / WHITE GRAY / WHITE WHITE / BLACK BLACK ALUMINUMCOPPER0.90 1.0 0.95 0.95 1.05 1.12ALUMINUM NONE ALUMINUM ALUMINUM NONE NONE NONE ASPHALT NONE EMULSION /GRAVEL GRANULE /BLACKALUMINUMX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH10 10TORCH TORCH TORCH/COLD TORCH/COLD TORCH TORCH TORCH TORCH TORCH TORCHX X X X X XPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN 1/8" 1/8" 1/8" TO DRAINO O O O O O O O O XO O O O O O O O O XO O O O O O O O O X OO O O O O O O O O OO O O O O OO O O O O O O O O XO O O O O O X X X O O XO O O O O O O O O X OO O O X OO X O X O X O O O X O O XX IO O O O X O X O X X O X O XO O O O O O O O O XO O O O O O O O O XX IO X O X O X O X O X O X X X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 - 120 40 - 120 40 - 120 40 - 120 20SAME SAME SAME SAME SAME SAME SAME DYNAWELD SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL OR MATERIAL OR MATERIAL OR CAP FR OR MATERIAL MATERIALAPPEX 45 APPEX 45 DYNACLAD DYNACLADTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCHNO NO NO NO NO NO NO NO NO NOUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1967 19611979 1994 1994 1994 1994 1994 1999 1999 1995 196183,400,0008,000,000 THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS5 5 8 8 8 8 8 8 8 100+YES YES YES YES YES YES YES YES YES YESREGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL G MALARKEYOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICEGUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE J DECHANDTSERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES M MALARKEY103

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME MALARKEY MALARKEY MALARKEY MALARKEY MALARKEY MALARKEYROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGCO. CO. CO. CO. CO. CO.2. PRODUCT NAME APP 160 APP 161 APP 162 PREMIUM SBS PARAGON SBS PANOPLYSMOOTH MINERAL MINERAL 601 625 SBS 6503. PRODUCT DESCRIPTIONType of Modifier APP APP APP SBS SBS SBSThickness (mils) 160 160 160 120 125 150Top Surface SMOOTH GRANULE GRANULE GRANULE GRANULE GRANULEReinforcing Material POLYESTER POLYESTER POLYESTER POLYGLASS FIBERGLASS FIBERGLASSColors BLACK WHITE WHITE WHITE / BLACK /VARIOUSWHITE / BLACK /VARIOUSWHITE / BLACK /VARIOUSInstalled Weight (lbs./ft 2 without ballast)4. KINDS OF FIELD SURFACING REQUIRED EMULSION / NONE NONE NONE NONE NONEGRANULE /ALUMINUM5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH TORCH TORCH HOT / COLD HOT / COLD HOT / COLD7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10Partially Adhered (method)Fully Adhered (method) TORCH TORCH TORCH HOT/COLD HOT/COLD HOT/COLDProtected Roof Membrane Assembly X X X X X X8. MINIMUM SLOPE REQUIRED TO DRAIN TO DRAIN TO DRAIN TO DRAIN TO DRAIN TO DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X XMineral Fiber X X X X X XPolystyrene X O X O X O X O X O X OCellular Glass O O O O O OPhenolicFiberboard X X X X X XPerlite X X X X X XPolyisocyanurate X O X O X O X O X O X OPolythane X O X O X O X O X O X OGypsum X X X X X XConcrete X X X X X XWood Plank X X X X X XPlywood X X X X X O XExisting Built-up Membrane X O X O X O X O X X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 20 20 2012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH TORCH HOT / COLD HOT / COLD HOT / COLD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NONE15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1960 1960 1960 1982Within USA 1990 1990 1990 1982 1993 199217. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 100 + 100 + 100 + 100 + 100 + 100+20. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: G MALARKEY G MALARKEY G MALARKEY G MALARKEY G MALARKEY G. MALARKEY22. FOR TECHNICAL INFORMATION, CONTACT: J DECHANDT J DECHANDT J DECHANDT J DECHANDT J DECHANDT J DECHANDTM. MALARKEY M. MALARKEY M. MALARKEY M. MALARKEY M. MALARKEY M MALARKEY23. SEE APPENDIX IF CHECKED104

Modified Bitumen Part 1 - <strong>General</strong> InformationMONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYBAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIVOF HENRY CO OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO.MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUSG100 s/s G100 P/S G100 P/P NP 180 S/S NP 180 P/P NP 180 P/S G100gMFR 170 MOP GRANULE 170 TORCH NP 180gMGRANULESBS SBS SBS SBS SBS SBS SBS SBS SBS SBS80 80 88 90 90 90 148 160 160 160SMOOTH SMOOTH SMOOTH SMOOTH SMOOTH SMOOTH GRANULE GRANULE GRANULE GRANULENON-WOVENGLASSNON-WOVENGLASSNON-WOVEVGLASSNON-WOVENPOLYESTERNON-WOVENPOLLYESTERNON-WOVENPOLYESTERNON-WOVENGLASSNON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWN0.57 0.57 0.57 0.57 0.77 0.57 1.15 1.06 1.06 1.04GRANULE GRANULE GRANULE GRANULE GRANULE GRANULE NONE NONE NONE NONESHEET SHEET SHEET SHEET SHEET SHEETX X X X X X X X X XX X X X X X X X X XMOP OR HOT MOP TORCH MOP OR TORCH HOT MOP MOP OR MOP OR TORCH MOP ORCOLD COLD COLD COLD COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEMOP/COLD ADH HOT MOP TORCH MOP. COLD ADHES TORCH HOT MOP MOP/COLD ADH MOP/COLD ADHES TORCH MOP/COLD ADHPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINX X X X X X X X X XX X X X X X X X X XO O O O O O O O O OO O O O O O O O O OX X X X O X X X X XX X X X O X X X X XO O O O O O O O O OO O O O O O O O O OX O X O X O X O X X O X O X O X O X OO O O O O O O O O OO O O O O O O O O OX X X X X X X X X XO O O O O O O O O OSEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIALMOP MOP TORCH MOPOR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVENO NO NO NO NO NO NO NO NO NOGERMANY GERMANY GERMANY GERMANY GERMANY CANADA GERMANY GERMANY GERMANY GERMANYCANADA CANADA CANADA CANADA CANADA CANADA CANADA CANADA CANADA CANADA1971 1971 1971 1971 1971 1981 1990 1990 19711985 1985 1985 1988 1988 1985 1992 1990 1990 1988MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONSTHOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORSNO NO NO NO NO NO NO NO NO NOW. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182X X X X X X X X X X105

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYBAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIV BAKOR DIVOF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO.2. PRODUCT NAME MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUS MODIFIED PLUSNP 180gT NP 180gM FR NP 180gT FR NP 250gM NP 250gT NP 250gM FR3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 160 160 160 160 160 160Top Surface GRANULE GRANULE GRANULE GRANULE GRANULE GRANULEReinforcing MaterialNON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERNON-WOVENPOLYESTERColorsWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNWHITE/BLACKGRAY/BROWNInstalled Weight (lbs./ft 2 without ballast) 1.04 1.04 1.25 1.06 1.06 1.254. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH MOP OR TORCH HOT MOP TORCH MOP ORCOLD OR COLD COLDADHESIVE ADHESIVE ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) TORCH MOP/COLD ADH TORCH MOP/COLD ADH TORCH MOP/COLD ADHProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X XMineral Fiber X X X X X XPolystyrene O O O O O OCellular Glass O O O O O OPhenolicFiberboard X X X X X XPerlite X X X X X XPolyisocyanurate O O O O O OPolythane O O O O O OGypsum X X X X X XConcrete O O O O O OWood Plank O O O O O OPlywood X X X X X XExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS11. WORKABLE TEMPERATURE RANGE (degrees F) 20 – 115 20 – 115 20 – 115 20 – 115 20 – 115 20 – 11512. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH MOP TORCH MOP TORCH MOPOR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin GERMANY GERMANY GERMANY GERMANY GERMANY GERMANYManufacture CANADA CANADA CANADA CANADA CANADA CANADA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1971 1971 1971Within USA 1988 1992 1992 1988 1988 199217. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA MILLIONS MILLIONS MILLIONSWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS20. LICENSED APPLICATOR AGREEMENT (yes/no) NO NO NO NO NO NO21. FOR SALES INFORMATION, CONTACT: W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-026822. FOR TECHNICAL INFORMATION, CONTACT: S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-518223. SEE APPENDIX IF CHECKED X X X X X X106

Modified Bitumen Part 1 - <strong>General</strong> InformationMONSEY PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCEBAKOR DIV ROOF ROOF ROOF ROOF ROOF ROOF ROOF ROOF ROOFOF HENRY CO. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC.MODIFIED PLUS DERBIGUM-XPS DERBICOLOR DERBIGUM DERBICOLOR DERBIGUM GP DERBICOLOR DERBICOLOR DERBIGUM DERBICOLORNP 250gT FR XPS XPS FR XPS FR GP GP GP FR GP FRSBS APP APP APP APP APP APP APP APP APP160 160 160 160 180 150 180 180 160 180GRANULE MODIFIED SLATE MODIFIED SLATE MODIFIED SLATE SLATE MODIFIED SLATEBITUMEN BITUMEN BITUMEN BITUMENNON-WOVENPOLYESTERWHITE/BLACKGRAY/BROWNFIBRGLS LAMIN& POLYESTERSCRIMFIBRGLS LAMIN& POLYESTERSCRIMFIBRGLS LAMIN& POLYESTERSCRIMFIBRGLS LAMIN& POLYESTERSCRIMFIBERGLASSMAT &POLYESTERSCRIMFIBERGLASSMAT &POLYESTERSCRIMFIBERGLASSMAT &POLYESTERSCRIMFIBERGLASSMAT &POLYESTERSCRIMFIBERGLASSMAT &POLYESTERSCRIMBLACK VARIOUS BLACK VARIOUS BLACK VARIOUS VARIOUS BLACK VARIOUS1.25 0.95 1.08 0.95 1.08 .93 1.06 1.06 .93 1.06NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCHTORCH TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTIC TRCH OR MASTICX X X XPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINX O O O O O O O O OX O O O O O O O O OO O O OO O O O O O O O O OO O OX O O O O O O O O OX O O O O O O O O OO O O O O O O O O OO O O O O O O O O OX O O O O O O O O OO X O X O O X O O X O OO O O O O O O O O OX O O O O O O O O OO X O X O X O X O X O X O X O X O X OSEE SPECS NONE NONE NONE NONE NONE NONE NONE NONE NONE20 – 115 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120SAME SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCHOR OR OR OR OR OR OR OR ORMASTIC MASTIC MASTIC MASTIC MASTIC MASTIC MASTIC MASTIC MASTICNO NO NO NO NO NO NO NO NO NOGERMANY USA USA USA USA USA USA USA USA USACANADA USA USA USA USA USA USA USA USA USA1992 1993 1993 1994 1994 1993 1993 1993 1994 1994THOUSANDSDISTRIBUTORS DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECT DISTR/DIRECTNO YES YES YES YES YES YES YES YES YESW. MULLEN CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE800/523-0268 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872S. LEONARD K. HUNT K. HUNT K. HUNT K. HUNT K. HUNT K. HUNT K. HUNT K. HUNT K. HUNT972/494-5182 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872 800/727–9872X X X X X X X X X X107

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME PERFORMANCE PERFORMANCE POLYGLASS POLYGLASS POLYGLASS POLYGLASSROOF ROOF USA USA USA USASYSTEMS INC. SYSTEMS INC.2. PRODUCT NAME BITUTAK MB BITUTAK MB POLYFLEX POLYFLEX 5 POLYBOND POLYBOND GMINERAL3. PRODUCT DESCRIPTIONType of Modifier APP APP APP APP APP APPThickness (mils) 152 160 160 200 160 180Top Surface SMOOTH GRANULES SMOOTH SMOOTH SMOOTH MINERALReinforcing Material POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERColors BLACK BLACK, WHITE, BLACK BLACK BLACK VARIOUSInstalled Weight (lbs./ft 2 without ballast) 0.89WEATHERWOOD 1.02 0.90 1.10 0.90 1.054. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TORCH TORCH TORCH TORCH TORCH TORCH7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) TORCH TORCH TORCH TORCH TORCH TORCHProtected Roof Membrane Assembly X X X X8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O O OMineral Fiber O O O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard O O O O O OPerlite O O O O O OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X X O X O X O X OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O X O X O X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 14- 120 40 -120 40 – 120 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH TORCH TORCH TORCH TORCH14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO YES YES YES YES15. COUNTRY OF:Origin USA USA ITALY ITALY ITALY ITALYManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1961 1961 1961 1961Within USA 1997 1997 1991 1991 1991 199117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA 100 MILLION 100 MILLION 80 MILLION 10 MILLIONWithin USA 3 MILLION 1 MILLION 200,000 50,00018. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 1 1 1 1 1 120. LICENSED APPLICATOR AGREEMENT (yes/no) NO NO YES YES YES YES21. FOR SALES INFORMATION, CONTACT: D QUNADT D QUNADT 800/222–9782 800/222–9782 800/222–9782 800/222–9782888/663-2488 888/663-248822. FOR TECHNICAL INFORMATION, CONTACT: K HUNT K HUNT 800/222–9782 800/222–9782 800/222–9782 800/222–9782888/663-2488 888/663-248823. SEE APPENDIX IF CHECKED X X108

Modified Bitumen Part 1 - <strong>General</strong> InformationPOLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASSUSA USA USA USA USA USA USA USA USA USAPOLYFLEX G POLYFLEX G-FR DIAMOND DUFLEX DUFLEX 5 DUFLEX G INSULROOFING INSULROOFING INSULBASE ELASTOSHIELDBLACK GRANULAR TS4APP APP APP APP APP APP APP APP APP SBS180 180 160 160 200 180 160 160 80 180MINERAL MINERAL MINERAL SMOOTH SMOOTH MINERAL 1/2" INSULATION 1/2" INSULATION 1/2" INSULATION MINERALPOLYESTER POLYESTER POLYESTER POLYESTER,FIBERGLASSPOLYESETER,FIBERGLASSPOLYESTER,FIBERGLASSMOOTH SMOOTH SMOOTHPOLYESTER POLYESTER POLYESTER POLYESTERVARIOUS VARIOUS BLACK BLACK BLACK VARIOUS BLACK BLACK BLACK VARIOUS1.05 1.10 0.90 0.90 1.10 1.05 1.30 1.40 1.00 1.05NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH HOT/TORCH TORCH TORCHTORCH TORCH TORCH TORCH TORCH TORCH HOT/TORCHX X X X X X X X X XPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OO O O O O O X X X OX O X O X O X O X O X O X X X OO O O O O O X X X OO O O O O O X X X OX O X O X O X O X O X O X X X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120POLYFLEX SAME POLYFLEX SAME SAME SAME POLYFLEX POLYFLEX POLYFLEX SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIALTORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH TORCH HOTYES YES YES YES YES YES YES YES YES YESITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALY ITALYUSA USA USA USA USA USA USA USA USA USA1961 1961 1961 1961 1961 1961 1961 1961 1961 19611991 1991 1991 1991 1991 1991 1991 1991 1991 1991MILLIONS MILLIONS MILLIONS MILLIONS THOUSANDS THOUSANDSMILLIONS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS1 1 1 1 1 1 1 1 1 1YES YES YES YES YES YES YES YES YES YES800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782109

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASSUSA USA USA USA USA USA2. PRODUCT NAME ELASTOFLEX ELASTOFLEX ELASTOFLEX ELASTOBASE ELASTOFLEX ELASTOFLEXS6 GS-6 G S6-FR V VG3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 120 140 140 80 120 140Top Surface SMOOTH MINERAL MINERAL SMOOTH SMOOTH MINERALReinforcing Material POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASS FIBERGLASSColors BLACK VARIOUS VARIOUS BLACK BLACK VARIOUSInstalled Weight (lbs./ft 2 without ballast) .80 .85 .85 .80 .80 .904. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT HOT HOT HOT / COLD / HOT HOTMECHANICAL7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) MECHANICALFully Adhered (method) HOT HOT HOT HOT/COLD HOT HOTProtected Roof Membrane Assembly X X X X X X8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O X O OMineral Fiber O O O X O OPolystyrene O O O X O OCellular Glass O O O X O OPhenolic O O O X O OFiberboard O O O X O OPerlite O O O X O OPolyisocyanurate O O O X O OPolythane O O O X O OGypsum O O O X O OConcrete O O O X O OWood Plank O O O X O OPlywood O O O X O OExisting Built-up Membrane O O O X O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD HOT HOT HOT HOT / COLD HOT HOT14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin ITALY ITALY ITALY ITALY ITALY ITALYManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1961 1961 1961 1961 1961 1961Within USA 1991 1991 1991 1991 1991 199117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 1 1 1 1 1 120. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–978222. FOR TECHNICAL INFORMATION, CONTACT: 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–9782 800/222–978223. SEE APPENDIX IF CHECKED110

Modified Bitumen Part 1 - <strong>General</strong> InformationPOLYGLASS SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST,USA INC. INC. INC. INC. INC. INC. INC. INC. INC.ELASTOFLEX PARADIENE PARADIENE PARADIENE PARADIENE PARADIENE PARADIENE PARADIENE PARAFOR VERALVG-FR 20 20 HT 20 PR 20 EG 30 30 HT 40 FR 50 LT (ALUM FACED)SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS140 91 91 91 118 130 130 150 180 138MINERAL PLAIN PLAIN PLAIN PLAIN MINERAL MINERAL MINERAL MINERAL ALUMINUMFIBERGLASS GLASS MAT GLASS MAT,GLASS SCRIMPOLYESTER/GLASS SCRIMGLASS MAT /GLASS SCRIMGLASS MAT GLASS MAT /GLASS SCDRIMGLASS MAT /GLASS SCRIMPOLYESTER /GLASS SCRIMGLASS MAT /GLASS SCRIMVARIOUS BLACK BLACK BLACK BLACK VARIOUS VARIOUS VARIOUS VARIOUS ALUMINUM.90 0.62 0.62 0.60 0.84 0.90 0.90 1.15 1.41 0.92NONE PARADIENE 30 PARADIENE 30 PARADIENE 30 NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XHOT HOT MOP / HOT MOP / HOT MOP / HOT MOP / HOT MOP / HOT MOP / HOT MOP / HOT MOP / HOT MOPPA-311 PA-311 PA-311 PA-311 PA-311 PA-311 PA-311 TORCH / PA-311 OR TORCHADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEMOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/TOR/PA-311 ADHOT MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/PA-311 ADH MOP/TOR/PA-311 AD MOP OR TORCHX X X X X X XPOS DRAIN DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL 1/4" 1/2" 1/2"O X X X X X X X X XO X X X X X X X X XO O O O O O O O O OO X O X O X O X O X O X O X O X O X OO O O O O O O O O OO X X X X X X X X XO X X X X X X X X XO X X X X X X X X XO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O OO O O O O O O O O ONONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120SAME VERAL VERAL VERAL SAME SAMEMATERIAL MATERIAL / MATERIALHOT TORCH TORCH TORCH TORCH TORCHVERALYES NO NO NO NO NO NO NO NOITALY FRANCE FRANCE FRANCE USA FRANCE FRANCE FRANCE FRANCE FRANCEUSA USA USA USA USA USA USA USA USA USA1961 1968 19681991 1979 1979THOUSANDSTHOUSANDSDISTRIBUTORS DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT1 9 9 9 9 9 9 9 9 9YES YES YES YES YES YES YES YES YES YES800/222–9782 J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070800/222–9782 K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070X X X X X X X X X111

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST, SIPLAST,INC. INC. INC. INC. INC. INC.2. PRODUCT NAME VERAL VERAL PARADIENE PARADIENE PARADIENE PARADIENE(COPPER) (STAINLESS 20 HV 20 TG 20 HT TG 20 PR TGSTEEL)3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 138 138 119 110 110 110Top Surface COPPER STAINLESS PLAIN PLAIN PLAIN PLAINSTEELReinforcing Material GLASS MAT /GLASS SCRIMGLASS MAT /GLASS SCRIMGLASS MAT GLASS MAT GLASS MAT /GLASS SCRIMPOLYESTER /GLASS SCRIMColors COPPER STAIN/STEEL BLACK BLACK BLACK BLACKInstalled Weight (lbs./ft 2 without ballast) 1.09 1.05 0.90 0.76 0.76 0.954. KINDS OF FIELD SURFACING REQUIRED NONE NONE PARADIENE PARADIENE PARADIENE PARADIENE30 30TG 30TG 30TG5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HOT MOP HOT MOP / TORCH TORCH TORCHOR TORCH OR TORCH PA-311ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) MOP/PA-311 ADH TORCH TORCH TORCHFully Adhered (method) MOP OR TORCH MOP OR TORCH MOP/PA-311 ADH TORCH TORCH TORCHProtected Roof Membrane Assembly X X X8. MINIMUM SLOPE REQUIRED 1/2 " 1/2 " DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X O O OMineral Fiber X X X O O OPolystyrene O O O O O OCellular Glass X O X O O O O OPhenolic O O O O O OFiberboard X X X O O OPerlite X X X O O OPolyisocyanurate X X X X X XPolythane O O O O O OGypsum O O O O O OConcrete O O O X O X O X OWood Plank O O O X O X O X OPlywood O O O O O OExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL SAME SAMEMATERIAL MATERIAL13. FLASHING METHOD TORCH TORCH14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO15. COUNTRY OF:Origin FRANCE FRANCE USA USA USA USAManufacture USA FRANCE USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA17. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 9 9 9 9 9 920. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–007022. FOR TECHNICAL INFORMATION, CONTACT: K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–0070 972/869–007023. SEE APPENDIX IF CHECKED X X X X X X112

Modified Bitumen Part 1 - <strong>General</strong> InformationSIPLAST, SIPLAST, SIPLAST, SIPLAST, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA,INC. INC. INC. INC. INC. INC. INC. INC. INC. INC.PARADIENE PARADIENE PARADIENE PARADIENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE20 EG TG 20 HV TG 30 TG 30 HT TG 180 FLAM 180 GR FLAM 250 FLAM180 GR 250SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS138 138 150 150 120 120 160 160 160 160PLAIN PLAIN MINERAL MINERAL SAND PLASTIC CERAMIC CERAMIC SAND PLASTICFILM GRANULES GRANULES FILMGLASS MAT /GLASS SCRIMGLASS MAT GLASS MAT GLASS MAT /GLASS SCRIMNONWOVEN NONWOVEN NONWOVEN NONWOVEN NONWOVEN NONWOVENBLACK BLACK VARIOUS VARIOUS BLACK BLACK VARIOUS VARIOUS BLACK BLACK0.96 0.96 1.10 1.10 0.75 0.73 0.98 0.99 1.01 0.99PARADIENE PARADIENE NONE NONE SOPRALENE OR SOPRALENE OR NONE NONE SOPRALENE OR SOPRALENE OR30TG 30TG ELASTOPHENE ELASTOPHENE ELASTOPHENE ELASTOPHENECAP SHEET CAP SHEET CAP SHEET CAP SHEETX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH HOT MOP HEAT FUSED HOT MOP HEAT FUSED HOT MOP HEAT FUSEDOR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVETORCHTORCHTORCH TORCH TORCH TORCH MOP OR ADHES HEAT FUSED MOP OR ADHES HEAT FUSED MOP OR ADHES HEAT FUSEDX X X X X X X X X XDEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL 1/8:12 DEAD LEVEL 1/8:12 DEAD LEVEL 1/8:12 DEAD LEVELO O O O X O X O O O X O OO O O O X O X O O O X O XO O O O O O O O O XO O O O X O X O O O X O XO O O O O O O OO O O O X O X O O O X OO O O O X O X O O O X O XX X X X O O O O O OO O O O O O O O O OO O O O X O X O O X O X O XX O X O X O X O X O X O O O X O XX O X O X O X O O O O O O OO O O O O O O O O OO O O O O O O O O ONONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 35 – 120 35 – 120 35 – 120 35 – 120 35 – 120 0 - 120VERAL VERAL SAME SAME SAME SAME SAME SAMEMATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL ORFOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANETORCH TORCH HEAT FUSED, HEAT HEAT FUSED, HEAT HEAT FUSED, HEATHOT MOP OR FUSED HOT MOP OR FUSED HOT MOP OR FUSEDCOLD ADHESIVE COLD ADHESIVE COLD ADHESIVENO NO NO NO YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN1975 1975 1975 1975 1975 19751984 1984 1984 1984 1984 1984MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONSDIRECT DIRECT DIRECT DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT9 9 9 9 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YESJ. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF J. MOLLENHOFF SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR972/869–0070 972/869–0070 972/869–0070 972/869–0070 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521K. WOLFORD K. WOLFORD K. WOLFORD K. WOLFORD TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR972/869–0070 972/869–0070 972/869–0070 972/869–0070 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055X X X X113

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA,INC. INC. INC. INC. INC. INC.2. PRODUCT NAME SOPRALENE SOPRALENE SOPRALENE SOPRALENE ELASTOPHENE ELASTOPHENE250 GR FLAM 250 GR 350 350 GR FLAM3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 160 160 160 200 90 120Top Surface CERAMIC CERAMIC SAND CERAMIC SAND PLASTICGRANULES GRANULES GRANULES FILMReinforcing Material NONWOVEN NONWOVEN NONWOVEN NONWOVEN FIBERGLASS FIBERGLASSColors VARIOUS VARIOUS BLACK VARIOUS BLACK BLACKInstalled Weight (lbs./ft 2 without ballast) 0.98 1.13 0.97 1.32 0.57 0.794. KINDS OF FIELD SURFACING REQUIRED NONE NONE SOPRALENE OR NONE ELASTOPHENE, ELASTOPHENE,ELASTOPHENE SOPRALENE SOPRALENECAP SHEET GRANULE GRANULE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HEAT FUSED HOT MOP HOT MOP HOT MOP HEAT FUSEDOR COLD OR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) MOP OR ADHESIVE HEAT FUSED MOP OR ADHESIVE HOP OR ADHESIVE MOP OR ADHESIVE HEAT FUSEDProtected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED 1/8:12 DEAD LEVEL 1/8:12 1/8:12 1/8:12 DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X O O X O X O X O OMineral Fiber X O X O X O X O X O X OPolystyrene X O X O O X O O OCellular Glass X O X O X O X O X O X OPhenolicOFiberboard X O O X O O X O OPerlite X O X O X O X O X O X OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum X O X O X O X O X O X OConcrete X O X O X O X O X O X OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O O O O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 35 – 120 0 - 120 35 – 120 35 - 120 35 – 120 35 – 12012. FLASHING MATERIAL SAME SAME SAME SAME SAME SOPRALENEMATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR OR FOILFOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANEMEMBRANE13. FLASHING METHOD HEAT FUSED, HEAT FUSED HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED,HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD ADHESIVECOLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN16, YEAR OF FIRST COMMERCIAL USEOutside USA 1975 1975 1975 1975 1975 1975Within USA 1984 1984 1984 1984 1984 198417. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 5 5 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-352122. FOR TECHNICAL INFORMATION, CONTACT: TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-005523. SEE APPENDIX IF CHECKED114

Modified Bitumen Part 1 - <strong>General</strong> InformationSOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA,INC. INC. INC. INC. INC. INC. INC. INC. INC. INC.ELASTOPHENE SOPRALENE SOPRALENE SOPRALENE 250 ELASTOPHENE ELASTOPHENE ELASTOPHENE ELASTOPHENE ELASTOPHENE ELASTOPHENEGR 280 FR GR FLAM 180 FR GR FLAM 250 FLAM GR PS 180 180 PS FLAMFR GR FR GR FR GRSBS SBS SBS SBS SBS SBS SBS SBS SBS SBS136 160 160 160 160 145 90 90 90 145CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC PLASTIC SAND SAND CERAMICGRANULES GRANULES GRANULES GRANULES GRANULES GRANULES FILM GRANULESFIBERGLASS NONWOVEN NONWOVEN NONWOVEN NONWOVEN FIBERGLASS FIBERGLASS NONWOVEN NONWOVEN FIBERGLASSVARIOUS VARIOUS VARIOUS VARIOUS VARIOUS VARIOUS BLACK BLACK BLACK VARIOUS0.90 0.98 0.99 0.98 0.98 0.60 0.60 0.55 0.53 0.96NONE NONE NONE NONE NONE NONE ELASTOPHENE, ELASTOPHENE, ELASTOPHENE, NONESOPRALENE SOPRALENE SOPRALENEGRANULE GRANULE GRANULEX X X X X X X X X XX X X X X X X X X XHOT MOP HOT MOP HEAT FUSED MOP OR HEAT FUSED HEAT FUSED HOT MOP MOP OR MOP OR HEAT FUSEDOR COLD OR COLD COLD OR COLD COLD COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEMOP OR ADHESIVE MOPOR ADHESIVE HEAT FUSED MOP OR ADHES HEAT FUSED HEAT FUSED MOP OR ADHESIVE MOP OR ADHESIVE MOP OR TORCH HEAT FUSEDX X X X X1/8:12 1/8:12 DEAD LEVEL 1/8:12 DEAD LEVEL DEAD LEVEL 1/8:12 1/8:12 1/8:12 1/8:12O O O X O X O O O X O O OO O O X O X O O X O X O X O OO O O X O X O O O O O OO O O X O X O O X O X O X O OO O O OO O O X O X O O O O X O OO O O X O X O O X O X O X O OO O O O O O O O O OO O O O O O O O O OO O X O X O X O O X O X O X O OO O O X O X O O X O X O X O OO O O O O O O O O OO O O O O O O O O OX O O O O X O X O O O ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0 - 120 35 – 120 35 – 120 35 – 120 0 – 120 0 – 120 0 – 120 0 – 120 0 – 120 0 – 120SOPRALENE SAME SAME SAME SAME SOPRALENE SOPRALENE SAME SAME SOPRALENEOR FOIL MATERIAL OR MATERIAL OR MATERIAL OR MATERIAL OR OR FOIL OR FOIL MATERIAL OR MATERIAL OR OR FOILMEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE FOIL MEMBRANE MEMBRANE MEMBRANE FOIL MEMBRANE FOIL MEMBRANE MEMBRANEHEAT FUSED, HEAT FUSED, HEAT FUSED HEAT FUSED, HEAT FUSED HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSEDHOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP ORCOLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN1975 1975 1975 1975 1975 1975 1975 1975 1975 19751984 1984 1984 1984 1984 1984 1984 1984 1984 1984MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT5 5 5 5 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YESSALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055 330/334-0055115

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA,INC. INC. INC. INC. INC. INC.2. PRODUCT NAME ELASTOPHENE SOPRALAST SOPRALAST SOPRALAST SOPRAFIX (F) SOPRALENEFR GR 50 TV ALU TV COPPER 50 TV INOX (H) (S) (T) 350 PS3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS SBSThickness (mils) 136 160 140 160 120 120Top Surface CERAMIC ALUMINUM COPPER STAINLESS PLASTIC PLASTICGRANULES FILM FILMReinforcing Material FIBERGLASS GLASS GRID GLASS GRID GLASS GRID NONWOVEN NONWOVENColors VARIOUS ALUMINUM COPPER STAINLESS BLACK BLACKInstalled Weight (lbs./ft 2 without ballast) 0.90 0.92 0.93 1.15 0.73 1.064. KINDS OF FIELD SURFACING REQUIRED NONE NONE NONE NONE SOPRALENE OR SOPRALENE ORELASTOPHENE ELASTOPHENECAP SHEETCAP SHEET5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HEAT FUSED HEAT FUSED HEAT FUSED HEAT FUSED HOT MOPOR COLDOR COLDADHESIVEADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) MOP OR ADHESIVE HEAT FUSED HEAT FUSED HEAT FUSED MECH. ATTACHED MOP OR ADHESIVEProtected Roof Membrane AssemblyX8. MINIMUM SLOPE REQUIRED 1/8:12 1/2" 1/2" 1/2" 1/8:12 1/8:129. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber O O O O X O X OMineral Fiber O O O O X O X OPolystyrene O O O O O OCellular Glass O O O O X O X OPhenolicFiberboard O O O O X O X OPerlite O O O O X O X OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O X O X OConcrete O O O O X O X OWood Plank O O O O X O OPlywood O O O O X O OExisting Built-up Membrane O O O O X O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 - 120 35 – 120 0 – 120 0 – 120 0 – 120 0 – 12012. FLASHING MATERIAL SOPRALENE SAME SAME SAME SOPRALENE SOPRALENEOR FOIL MATERIAL OR MATERIAL MATERIAL OR FOIL OR FOILMEMBRANE FOIL MEMBRANE MEMBRANE MEMBRANE13. FLASHING METHOD HEAT FUSED HEAT FUSED HEAT FUSED HEAT FUSED HEAT FUSED HEAT FUSEDOR COLD OR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN16, YEAR OF FIRST COMMERCIAL USEOutside USA 1975 1975 1975 1975 1975 1975Within USA 1984 1984 1984 1984 1984 198417. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 5 5 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-352122. FOR TECHNICAL INFORMATION, CONTACT: TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR330/334-0055 330/334-0055 330/334-0055 330/334-0066 330/334-0066 330/334-006623. SEE APPENDIX IF CHECKED116

Modified Bitumen Part 1 - <strong>General</strong> InformationSOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, SOPREMA, TAMKO TAMKOINC. INC. INC. INC. INC. INC. INC. INC. ROOFING ROOFINGPRODUCTS PRODUCTSSOPRALENE 180 ELASTOPHENE LASTOBOND COLPHENE GR COLDPHENE COLDPHENE COLDPHENE SOPRAFIX (X) AWAPLAN AWAPLANSP 3.5mm 3.0mm FR GR HR GR HR-FR GR PREMIUM 170SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS140 120 108 140 140 140 140 160 155 154SAND/PLASTIC SAND SAND CERAMIC CERAMIC CERAMIC CERAMIC PLASTIC GRANULE GRANULEFILM GRANULES GRANULES GRANULES GRANULES FILMNONWOVEN FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS GLASS GRID GLASS GRID NONWOVEN POLYESTER POLYESTERBLACK BLACK BLACK VARIOUS VARIOUS VARIOUS VARIOUS BLACK VARIOUS VARIOUS0.80 0.79 0.60 0.90 0.90 0.90 0.90 0.97 1.04 0.99SOPRALENE OR SHINGLES NONE NONE NONE NONE SOPRALENE OR NONE NONEELASTOPHENE OR TILE ELASTOPHENECAP SHEETCAP SHEETX X X X X X X X X XX X X X X X X X X XHEAT FUSED HOT MOP SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE HEAT FUSED HOT MOP HOT MOPOR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVEHEAT FUSED HOT MOP SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE SELF ADHESIVE MECH. ATTACHED HOT MOP/COLD HOT MOP/COLDDEAD LEVEL 1/8:12 1/8:12 1/8:12 1/8:12 1/8:12 1/8:12 1/8:12 POS DRAIN POS DRAINO O O O O O O X O X XX O X O O O O O O X O X XO O X O X X X O O OX O X O O O O O O X O X XO O O O OO O O O O O O X O X XX O X O O O O O O X O X XO O O O O O O O O OO O O O O O O OX O X O X X X X X X O X XX O X O O O O O O X O O OO O O O O O O X O X XO O O O O O O X O X XO O O O O O O X O X XNONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0 – 120 35 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120 40 - 120SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SAME SAMEOR FOIL OR FOIL OR FOIL OR FOIL OR FOIL OR FOIL OR FOIL OR FOIL MATERIAL OR MATERIAL ORMEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE VERSA-FLASH VERSA-FLASHHEAT FUSED HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED, HEAT FUSED HOT MOP HOT MOPOR COLD HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR HOT MOP OR OR COLD OR COLDADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE COLD ADHESIVE ADHESIVE ADHESIVEYES YES YES YES YES YES YES YES NO NOUSA USA USA USA USA USA USA USA W GERMANY W GERMANYUSA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA, FR, CAN USA USA1975 1975 1975 1975 1975 1975 1975 1975 19701984 1984 1984 1984 1984 1984 1984 1984 1978 1986MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRIBUTORS DISTRIBUTORS5 5 5 5 5 5 5 5 27 27YES YES YES YES YES YES YES YES YES YESSALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR SALES MGR DIST OFFICE DIST OFFICE800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521 800/356-3521TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH MGR TECH SERVICE TECH SERVICE330/334-0066 330/334-0066 330/334-0066 330/334-0066 330/334-0066 330/334-0066 330/334-0066 330/334-0066 800/641–4691 800/641–4691XX117

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME TAMKO TAMKO TAMKO TAMKO TAMKO TAMKOROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS2. PRODUCT NAME AWAPLAN AWAPLAN AWAPLAN AWAPLAN VERSA-FLEX SPEEDWELDPREMIUM 170 FR VERSA- HEAT WELDING APPFR SMOOTH GRANULATED3. PRODUCT DESCRIPTIONType of Modifier SBS SBS SBS SBS SBS APPThickness (mils) 155 154 160 185 115 160Top Surface GRANULE GRANULE SMOOTH GRANULE SMOOTH GRANULEReinforcing Material POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERColors VARIOUS VARIOUS BLACK VARIOUS BLACK WHITE / BLACKInstalled Weight (lbs./ft 2 without ballast) 1.04 0.99 1.0 1.04 0.76 1.054. KINDS OF FIELD SURFACING REQUIRED NONE NONE AWAPLAN, NONE AWAPLAN, NONECOATING,GRAVEL5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HOT MOP HOT MOP TORCH HOTMOP TORCHOR TORCHOR COLDGRAVELADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) HOT MOP HOT MOP MOP/TORCH/ADHS TORCH HOT MOP/COLD TORC HProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X X X XMineral Fiber X X X X X XPolystyrene O O O O O OCellular Glass X X X X X XPhenolic XFiberboard X X X X X XPerlite X X X X X XPolyisocyanurate O O O O O OPolythaneGypsum X X X X X XConcrete O O O O O OWood Plank X X X X X XPlywood X X X X X XExisting Built-up Membrane X X X X X X10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F)12. FLASHING MATERIAL SAME SAME SAME SAME AWAFLEX 170, SAMEMATERIAL OR MATERIAL OR MATERIAL OR MATERIAL AWAPREMIUM MATERIALVERSA-FLASH VERSA-FLASH VERSA-FLASH VERSA-FLASH13. FLASHING METHOD HOT MOP HOT MOP HOT MOP HOT MOP HOT MOP TORCHOR COLD OR COLD OR OR OR COLDADHESIVE ADHESIVE TORCH TORCH ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) NO NO NO NO NO NO15. COUNTRY OF:Origin W GERMANY W GERMANY W GERMANY W GERMANY USA USAManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1988 1991 1986 1981 1997 199517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 27 27 27 27 27 2720. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE DIST OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641-469123. SEE APPENDIX IF CHECKED X X X X118

Modified Bitumen Part 1 - <strong>General</strong> InformationTAMKO TEXAS TEXSA, TEXSA, TEXSA, TEXSA, TEXSA, TEXSA, TEXSA, TREMCOROOFING REFINERY SA SA SA SA SA SA SA INC.PRODUCTS CORP.SPEEDWELD MIGHTYPLATE MIN TEXAL–15 TEXAL–10 FV MIN MOFLEX–20 TEXSELF MINERAL M.P. TEXSELF TEXSELF FP POWERPLYAPP FP-S 3MM FP-S 5KG FM AL 45 HE FRSMOOTHAPP APP APP SBS SBS SBS SBS SBS SBS SBS160 157 158 120 158 60 158 80 80 175SMOOTH MODIFIED MINERAL SMOOTH MINERAL POLYETHELYNE MINERAL ALUMINUM SMOOTH GRANULEBITUMEN GRANULE GRANULE GRANULEPOLYESTER NONWOVEN NONWOVEN FIBERGLASS NONWOVEN NONE COMPOSITE: NONE NONWOVEN POLYESTERBLACK BLACK GRAY / GREEN /REDBLACK GRAY / GREEN /REDBLACK GRAY / GREEN /REDALUMINUM BLACK VARIOUS0.90 0.88 1.02 0.74 1.02 0.36 1.02 0.43 0.48 1.05SPEEDWELD SP NONE NONE NONE NONE NONE NONE NONE NONEOR COLDCOATINGX X X X X X X X X XX X X X X X X X X XTORCH TORCH TORCH TORCH TORCH SELF-ADHESIVE TORCH SELF-ADHESIVE SELF-ADHESIVE HOT MOPOR COLDADHESIVETORCH TORCH TORCH MECHANICALTORC H TORCH TORCH TORCH TORCH SELF-ADHERING TORCH SELF-ADHERING SELF-ADHERING HOT OR COLDPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN TO DRAIN TO DRAIN POS. DRAINAGEX O O XX O X X X X O X XO O O O O O O O OX O X X X O X XX O X X X O X XX O X X X X O X X XX O X X X X O X X XO O X X X X O X X OO X X X X O X X OX O X X X O O O O OO X O X X X X X X X XX O O O X O X X OX O O O X O X X OX X O X X X X X X X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0 – 120 40 – 120 40 – 120 40 – 120 50 – 120 40 – 120 50 – 120 50 – 120 35 - 120SPEEDWELD APP SAME SAME SAME MATERIAL SAME SELF-ADHESIVE ANY SBS SELF-ADHESIVE SELF-ADHESIVE SAME, CSPE, ORGRAN OR SAME MATERIAL MATERIAL OR ANY MATERIAL TEXSELF CAP CAP SHEET TEXSELF CAP TEXSELF CAP COMPATIBLEMATERIALSBS CAP SHEET SHEET SHEET SHEET MATERIALTORCHW/CTGTORCH TORCH TORCH TORCH SELF-ADHERING TORCH SELF-ADHERING SELF-ADHERING HOT MOPOR COLDNO NO NO NO NO NO NO NO NO YESADHESIVEUSA USA SPAIN SPAIN SPAIN SPAIN SPAIN SPAIN SPAIN USAUSA USA SPAIN SPAIN SPAIN SPAIN SPAIN SPAIN SPAIN USA1995 19811985 1991 1991 1986 1994 1994 1996MILLIONSTHOUSANDS THOUSANDS THOUSANDS THOUSANDSDISTRIBUTORS DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DIRECT27 14YES YES YESDIST OFFICE J. MC GEE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE CUST SERVICE SALES OFFICETECH SERVICE J. MC GEE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH DEPT800/641-4691119

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME TREMCO TREMCO TREMCO U.S. INTEC, U.S. INTEC, U.S. INTEC,INC. INC. INC. INC. INC. INC.2. PRODUCT NAME POWERPLY POWERPLY POWERPLY INTEC SP4 INTEC GBSP4 INTECPREMIUM FR PREMIUM STANDARD GBSP4FRSMOOTHFR3. PRODUCT DESCRIPTIONType of Modifier SBS/SEBS/SIS SBS/SEBS SBS APP APP APPThickness (mils) 150 80 120 160 160 160Top Surface GRANULE SMOOTH GRANULE MODIFIED GRANULES GRANULESBITUMENReinforcing Material POLYESTER /FIBERGLASSPOLYESTER /FIBERGLASSFIBERGLASS POLYESTER POLYESTER POLYESTERColors VARIOUS BLACK WHITE/VARIOUS BLACK VARIOUS VARIOUSInstalled Weight (lbs./ft 2 without ballast) 0.94 0.46 0.88 0.88 1.05 1.054. KINDS OF FIELD SURFACING REQUIRED NONE EMULSION NONE ROOF COATING, NONE NONEORGRANULE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT MOP HOT MOP HOT MOP TORCH TORCH TORCHOR COLD OR COLD OR COLDGRAVELADHESIVE ADHESIVE ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) HOT OR COLD HOT OR COLD HOT OR COLD TORCH TORCH TORCHProtected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED POS. DRAINAGE POS. DRAINAGE POS. DRAINAGE POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X X X O O OMineral Fiber O O OPolystyrene O O OCellular Glass O O OPhenolicFiberboard X X XPerlite X X X O O OPolyisocyanurate O O O O O OPolythane O O O O O OGypsum O O O O O OConcrete X X X X O X O X OWood Plank O O O O O OPlywood O O O O O OExisting Built-up Membrane O O O X O X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 35 - 120 35 -120 35 - 120 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL SAME, CSPE, SAME, CSPE, SAME, CSPE, SAME SAME SAMEOR COMPATIBLE OR COMPATIBLE OR COMPATIBLE MATERIAL MATERIAL MATERIALMATERIAL MATERIAL MATERIAL13. FLASHING METHOD HOT MOP HOT MOP HOT MOP TORCH TORCH TORCHOR COLD OR COLD OR COLDADHESIVE ADHESIVE ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA ITALY ITALY ITALYManufacture USA USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1961 1976 1976Within USA 1978 1983 199117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 14 14 14 9 9 920. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES OFFICE SALES OFFICE SALES OFFICE 800/231-4631 800/231-4631 800/231-463122. FOR TECHNICAL INFORMATION, CONTACT: TECH DEPT TECH DEPT TECH DEPT 800/624-6832 800/624-6832 800/624-6832GRAVEL23. SEE APPENDIX IF CHECKED120

Modified Bitumen Part 1 - <strong>General</strong> InformationU.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC,INC. INC. INC. INC. INC. INC. INC. INC. INC. INC.INTEC GBSP INTEC/FLEX M INTEC/FLEX INTEC/FLEX INTEC/FLEX S INTEC/FLEX INTEC/FLEX INTEC/FLEX INTEC/FLEX FLEXBASE250 FR 190 FR4.5 FR3 HS 190 FR 250 FR G4 CAP 60 FRAPP SBS SBS SBS SBS SBS SBS SBS SBS SBS177 160 160 180 138 150 160 177 160 80GRANULES GRANULES GRANULES GRANULES SMOOTH GRANULES GRANULES GRANULES GRANULES SMOOTHPOLYESTER POLYESTER POLYESTER FIBERGLASS POLYESTER GLASS MATGLASS SCRIMPOLYESTERPOLYESTERCOMPOSITEFIBERGLASSFIBERGLASSVARIOUS VARIOUS VARIOUS VARIOUS VARIOUS VARIOUS VARIOUS VARIOUS1.1 1.05 0.95 1.05 0.85 0.93 0.98 0.98 0.98 0.40NONE NONE NONE NONE CAP SHEET / NONE NONE NONE NONE CAP SHEET /MOP / MOP /GRAVELGRAVELX X X X X X X X X XX X X X X X X X X XTORCH MOP / MOP / MOP / MOP / MOP / MOP / MOP / MOP / MOP /ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVETORCH HOT MOP HOT MOP HOT MOP MOP/ADHES MOP/ADHES MOP/ADHES MOP/ADHES MOP/ADHES MOP/MECH FASPOS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAINO O O O X O X X X X XO O O O X O X X X X XO O O O O O O O O OO O O O X O X O X O X O X O X OOO O O O X X X X X XO O O O X X X X X XO O O O X O X O O O O X OO O O O X O X O O O O X OO O O O X O X O O O O X OO O O O X O X O O O O X OO O O O X O X O O O O X OO O O O X O X O O O O X OO O O O X O X O O O O X ONONE SEE SPECS SEE SPECS NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 -120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120SAME SAME SAME SAME SAME SAME SAME SAME SAME SAMEMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIAL MATERIALTORCH MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENT MOP / CEMENTYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1990 1985 1985 1985 1985 1985 1990 1990 1985 19881990 1985 1985 1985 1985 1985 1990 1990 1985 1988DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS9 9 9 9 9 9 9 9 9 9YES YES YES YES YES YES YES YES YES YES800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631 800/231-4631800/624-6832 800/624-6832 800/624-6832 800/231-6832 800/624-6832 800/624-6832 800/624-6832 800/624-6832 800/624-6832 800/624-6832121

Modified Bitumen Part 1 - <strong>General</strong> Information1. COMPANY NAME U.S. INTEC, U.S. IINTEC, U.S. INTEC, U.S. INTEC, U.S. INTEC,INC. INC. INC. INC.. INC..2. PRODUCT NAME INTEC FLAME FLAME FLAME FLAMEMODIFIED FREE FREE FREE FREEBASE PLUS 160 S BASE 160 180 FR3. PRODUCT DESCRIPTIONType of Modifier SBS APP APP APP APPThickness (mils) 95Top Surface SMOOTH SMOOTH SMOOTH GRANULE GRANULEReinforcing Material FIBERGLASS POLYESTERGLASSPOLYESTERGLASSPOLYESTER /GLASSPOLYESTER /GLASSColors N/A N/A BLACK /WHITE BLACK /WHITEInstalled Weight (lbs./ft 2 without ballast) 0.544. KINDS OF FIELD SURFACING REQUIRED CAP SHEET / NA NAMOPGRAVEL5. USE INNew <strong>Roofing</strong> X X X X XReroofing X X X X X6. FIELD LAP JOINT METHOD MOP / COLD COLD COLD COLDADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE7. TYPES OF ROOF SYSTEMS:Loose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method)Fully Adhered (method) MOP/MECH FAS X X X XProtected Roof Membrane Assembly X X X X8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN POS DRAIN POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(O=overlayment required in some/all circumstances)Glass Fiber X O O O OMineral Fiber X O O O OPolystyrene O O O O OCellular Glass X O O O O OPhenolicFiberboardXPerlite XPolyisocyanurate X O O O O OPolythane X O O O O OGypsum X O O O O OConcrete X O X O X O X O X OWood Plank X O O O O OPlywood X O O O O OExisting Built-up Membrane X O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 – 120 40 - 120 40 - 120 40 - 120 40 - 12012. FLASHING MATERIAL SAME N/A N/A SAME SAMEMATERIAL MATERIAL MATERIAL13. FLASHING METHOD MOP / CEMENT COLD ADHESIVE COLD AHDESIVE COLD AHDESIVE COLD AHDESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USAManufacture USA USA USA USA USA16, YEAR OF FIRST COMMERCIAL USEOutside USA 1989Within USA 1989 1999 1999 1999 199917. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 9 5 5 5 520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/231-4631 800/365-7353 800/365-7353 800/365-7353 800/365-7353EXT. 3000 EXT. 3000 EXT. 3000 EXT. 300022. FOR TECHNICAL INFORMATION, CONTACT: 800/624-6832 800/624-6832 800/624-6832 800/624-6832 800/624-683223. SEE APPENDIX IF CHECKED122

THIS PAGE LEFT BLANK INTENTIONALLY

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME AMERICAN BITECLUBRICANTS, INC.INC.2. PRODUCT NAME TIFFANY MDA3. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface SMOOTH GRANULE4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150 157Thickness (min., mils) Grade G Type I: 160; Type II: 170 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100 110Bottom coating thickness (min., mils) Type I: 30; Type II: 40 805B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80 60.5Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40 35Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 180 93.1Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 64 21.8Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50 42.5Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 102Low temperature flexibility, before and after heat conditioning, F, max. +32 +7 15.8Dimensional stability, % change, max. 1 ≤1High temperature stability, F min. 230 250Granule embedment, Grade G only, max. loss, grams 2

APP Modified Bitumen Part 2: Test ResultsBITEC BITEC BITEC BITEC CELOTEX CELOTEX CERTAINTEED CERTAINTEEDINC. INC. INC. INC. CORP. CORP. ROOFING ROOFINGPRODUCTS PRODUCTSAPS-4T APM-4T APM-4.5T COMPABASE CELOTEX APP CELOTEX APP FLINTASTIC FLINTASTICFA-2T 4/S CAP SHEET 4M CAP SHEET STA STA PLUS 5.0POLYESTER POLYESTER POLYESTER FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTERSMOOTH GRANULE GRANULE SMOOTH SMOOTH GRANULE ALUMINUM ALUMINUMXXX160 157 160 200160 180 15790 88 100110 12380 80 90 60 8060.5 67 110 / 90 110 / 9035 6 63 / 68 63 / 6893.1 125 121 141 / 118 141 / 11821.8 46 38 19 / 23 19 / 2342.5 60 / 65 60 / 65102 149 147 100 10015.8 +14 +12 +19 8 8≤1 ≤1 ≤1 0.9 0.9 0.5 0.5250 250 250 250 250.01 >.01

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME CERTAINTEED CERTAINTEEDROOFING ROOFINGPRODUCTS PRODUCTS2. PRODUCT NAME FLINTASTIC FLINTASTICGTA GTA-FR3. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface GRANULE GRANULE4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150Thickness (min., mils) Grade G Type I: 160; Type II: 170 180 180Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100 105 105Bottom coating thickness (min., mils) Type I: 30; Type II: 40 60 605B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80 106 / 92 106 / 92Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40 57 / 62 57 / 62Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 133 / 116 133 / 116Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 20 /22 20 /22Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50 62 / 65 62 / 65Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 100 100Low temperature flexibility, before and after heat conditioning, F, max. +32 +8 +8Dimensional stability, % change, max. 1 0.5 0.5High temperature stability, F min. 230 250 250Granule embedment, Grade G only, max. loss, grams 2 1.0 1.0Water absorption, % max. 3.2 >.01 >.01Moisture content, % max. 1 >.01 >.01Low temperature unrolling, F max. 41 30 306B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 417. SEE APPENDIX IF CHECKED126

APP Modified Bitumen Part 2: Test ResultsCERTAINTEED DERMABIT DERMABIT DIBITEN DIBITEN DIBITEN ECOLOGY ECOLOGYROOFING WATER- WATER- ROOF ROOFPRODUCTS PROOFING PROOFING SYSTEMS SYSTEMSGTA BLACK DERMABIT DERMABIT DIBITTEN DIBITEN POLY DIBITEN ERS 600 ERS 601DIAMOND & 4170 SMOOTH 4170 GRANULE POLY/4 4.5 GRANULAR POLY/5WHITE DIAMONDPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERGRANULE SMOOTH GRANULE SMOOTH GRANULE SMOOTH SMOOTH GRANULEXX X XX X X160 160 200 160172 160 180 18090 75 85 75100 100 90 9070 40 40 80 80 100 80106 / 92 69 69 60 60 60 62 6257 / 62 38 38 25 25 25 25 25133 / 116 74 24 160 160 200 61 6120 / 22 10 10 22 21 22 28 2862 / 65 30 30 30 30 30 34 34105 90 90 84 100 118 88 88+8 +32 +32 +14 +23 +14 +33 +330.5 1 1 0.1 0.1 0.1 0.01 2250 230 230 230 230 230 230 2301.0 2 2 2>.01 2 2 0.4 0.5 0.4 0.04 0.05>.01 1 1 0.2 0.2 0.2 0.01 0.0130 41 41 40 40 40 40 40127

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME FIRESTONE FIRESTONEBUILDINGS BUILDINGSPRODS. CO. PRODS. CO.2. PRODUCT NAME APP 160 APP 1703. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface SMOOTH SMOOTH4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150 150 165Thickness (min., mils) Grade G Type I: 160; Type II: 170Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100Bottom coating thickness (min., mils) Type I: 30; Type II: 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 115 115Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 30 30Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 80 80Low temperature flexibility, before and after heat conditioning, F, max. +32 +15 +15Dimensional stability, % change, max. 1 0.5 0.4High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 417. SEE APPENDIX IF CHECKED128

APP Modified Bitumen Part 2: Test ResultsFIRESTONE FIRESTONE GAF GAF GAF GAF GAF ICA, INC.BUILDINGS BUILDINGS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALSPRODS. CO. PRODS. CO. CORP. CORP. CORP. CORP. CORP/APP 180 APP 180 FR RUBEROID RUBEROID RUBEROID RUBEROID RUBEROID ICA PREMIUMTORCH TORCH TORCH PLUS TORCH FR TORCH 1 APP SMOOTH(SMOOTH) (GRANULE)POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERGRANULE GRANULE SMOOTH GANULE GRANULE GRANULE GRANULE SMOOTHXX XXXX149 160170 170 160 185 185 16070 8885 100 100 8530 30 40 40 30 6050 50 80 80 50 85 / 8540 40 40 40 40 45115 115 70 70 90 90 70 14030 30 15 15 15 15 10 4030 30 50 50 30 5080 80 70 70 80 80 70 120+15 +15 23 23 23 23 23 +250.6 0.05 1.0 1.0 1.0 1.0 1.0 0.5230 230 230 230 230 275NA 2 2 2 2 23.2 3.2 3.2 3.2 3.2 31.0 1.0 1.0 1.0 1.0 141 41 41 41 41 41129

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME ICA, INC. ICA, INC.2. PRODUCT NAME ICA PREMIUM ICA PREMIUMAPP MINERAL APP SLATE3. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface GRANULE GRANULE4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150Thickness (min., mils) Grade G Type I: 160; Type II: 170 180 180Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100 105 105Bottom coating thickness (min., mils) Type I: 30; Type II: 40 605B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80 85 / 85 85Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40 45 45Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 120 120Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 40 40Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50 50 50Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 120 120Low temperature flexibility, before and after heat conditioning, F, max. +32 +25 +25Dimensional stability, % change, max. 1 0.5 0.5High temperature stability, F min. 230 275 275Granule embedment, Grade G only, max. loss, grams 2 2 2Water absorption, % max. 3.2 3 3Moisture content, % max. 1 1 1Low temperature unrolling, F max. 41 41 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 417. SEE APPENDIX IF CHECKEDX130

APP Modified Bitumen Part 2: Test ResultsIKO IKO JOHNS JOHNS JOHNS JOHNS JOHNS JOHNSINDUSTRIES INDUSTRIES MANVILLE MANVILLE MANVILLE MANVILLE MANVILLE MANVILLEINC. INC. INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONALARMOURPLAST ARMOURPLAST APPEX 4S TRICOR M-FR TRICOR S BICOR S APPEX 4.5M APPEX 4.5MGRANULAR CLASSIC FRPOLYESTER POLYESTER POLYESTER COMBINATION COMBINATION COMBINATION POLYESTER POLYESTERGRANULE SMOOTH SMOOTH GRANULE SMOOTH SMOOTH GRANULE GRANULEXXXXX160 160160 160 1607590 9080 80 80160 16018075 759090 80 8060 60 6025 25 2574 74 121 105 10650 50 42 38 3835 35 35106 106 149 143 141+26 +26 +21 +21 +230.9 0.9 0.6230 230 2302 20.5 0.5 0.7 1.8 2.20.1 0.1 0.15 0.15 0.1040 40 40150 150 1003 3 3300 300 2004.7 4.7 3.5260 260 163+23 +23 +230 0 0240 240 24021.3 1.3 1.30.05 0.05 0.0540 40 40131

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME JOHNS MALARKEYMANVILLE ROOFINGINTERNATIONAL CO.2. PRODUCT NAME BICOR M APP 159FR SMOOTH3. PRODUCT DESCRIPTIONReinforcing COMPOSITE FIBERGLASSTop surface GRANULE SMOOTH4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150 80Thickness (min., mils) Grade G Type I: 160; Type II: 170Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100Bottom coating thickness (min., mils) Type I: 30; Type II: 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160 180Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90 90Bottom coating thickness (min., mils) 40 806A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80 75Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80Low temperature flexibility, before and after heat conditioning, F, max. +32 -15Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180 180Low temperature flexibility, before and after heat conditioning, F, max. +32 +23Dimensional stability, % change, max. 1 0High temperature stability, F min. 230 240Granule embedment, Grade G only, max. loss, grams 2 2Water absorption, % max. 3.2 1.3Moisture content, % max. 1 0.05Low temperature unrolling, F max. 41 407. SEE APPENDIX IF CHECKEDX132

APP Modified Bitumen Part 2: Test ResultsMALARKEY MALARKEY MALARKEY PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCE PERFORMANCEROOFING ROOFING ROOFING ROOF ROOF ROOF ROOF ROOFCO. CO. CO. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC. SYSTEMS INC.APP 160 APP 161 APP 162 BITUTAK MB BITUTAK MB DERBIGUM DERBICOLOR DERBICOLORSMOOTH MINERAL MINERAL MINERAL XPS FR XPS FR GP-FRPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER COMBINATION COMBINATION COMBINATIONSMOOTH GRANULE GRANULE SMOOTH GRANULE SMOOTH GRANULE GRANULEXXXXX157 150177 177 16890 89105 105 10045 40160180 18096110 110110 70 7070 70 70 80 / 80 80 / 8150 50 50 50 / 50 50 / 50120 12030 2050 50110 110-15 -15 -15 +18 +180.5 0275 2751.1 1.5 1.53 31 141 41100 100 655 5 4.5220 210 1505 5 4180 200 120+23 +23 +230.05 0.05 0.05275 275 2751.5 1.53.2 3.2 321 1 141 41 41133

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME PERFORMANCE PERFORMANCEROOF ROOFSYSTEMS INC. SYSTEMS INC.2. PRODUCT NAME DERBIGUM DERBIGUMGPGP-FR3. PRODUCT DESCRIPTIONReinforcing COMBINATION COMBINATIONTop surface SMOOTH SMOOTH4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced) X XType II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150Thickness (min., mils) Grade G Type I: 160; Type II: 170Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100Bottom coating thickness (min., mils) Type I: 30; Type II: 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140 150 150Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75 92 92Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 40 110 1106A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100 75 75Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3 4.5 4.5Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200 150 150Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3 4 4Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180 120 120Low temperature flexibility, before and after heat conditioning, F, max. +32 +23 +23Dimensional stability, % change, max. 1 0.05 0.05High temperature stability, F min. 230 275 275Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2 32 32Moisture content, % max. 1 1 1Low temperature unrolling, F max. 41 41 417. SEE APPENDIX IF CHECKED134

APP Modified Bitumen Part 2: Test ResultsPERFORMANCE PERFORMANCE PERFORMANCE POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASSROOF ROOF ROOF USA, INC. USA, NC. USA, NC. USA, NC. USA, NC.SYSTEMS INC. SYSTEMS INC. SYSTEMS INC.DERBIGUM DERBICOLOR DERBICOLOR POLYBOND POLYBOND G POLYFLEX POLYFLEX 5 POLYFLEX GXPS XPS GPCOMBINATION COMBINATION COMBINATION POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERSMOOTH GRANULE GRANULE SMOOTH GRANULE SMOOTH SMOOTH GRANULEX X XXXXXX160 160 200180 18081 83 10295 97160180 18096110 110110 70 7050 50 65 65 6523 23 35 35 35100 100 100 100 1008 8 10 10 1030 30 40 40 4075 75 90 90 80+32 +32 +32 +32 +220.5 0.5 0.5 0.5 0.5248 248 248 248 248≤2 NA NA 2≤3 ≤3 3 3 30.1 0.1 1 1 0.141 41 41 41 41100 100 655 5 4.5220 210 1505 5 4180 20 120+23 +23 +230.05 0.05 0.05275 275 2751.5 1.532 32 321 1 141 41 41135

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME POLYGLASS POLYGLASSUSA, NC. USA, NC.2. PRODUCT NAME POLYFLEX G-FR DIAMONDBLACK3. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface GRANULE GRANULE4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced) X XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150Thickness (min., mils) Grade G Type I: 160; Type II: 170 180 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100 97 87Bottom coating thickness (min., mils) Type I: 30; Type II: 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80 65 60Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40 35 25Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 100 100Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 10 8Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50 40 35Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 80 75Low temperature flexibility, before and after heat conditioning, F, max. +32 +22 +32Dimensional stability, % change, max. 1 0.5 0.5High temperature stability, F min. 230 248 248Granule embedment, Grade G only, max. loss, grams 2 2 2Water absorption, % max. 3.2 3 3Moisture content, % max. 1 0.1 0.1Low temperature unrolling, F max. 41 41 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 417. SEE APPENDIX IF CHECKED136

APP Modified Bitumen Part 2: Test ResultsPOLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS POLYGLASS TAMKO TAMKOUSA, NC. USA, NC. USA, NC. USA, NC. USA, NC. USA, NC. ROOFING ROOFINGPRODUCTS PRODUCTSDUFLEX DUFLEX 5 DUFLEX G INSULROOFING INSULROOFING INSULBASE SPEEDWELD SPEEDWELDGRANULAR APP APPGRANULATED SMOOTHCOMBINATION COMBINATION COMBINATION POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERSMOOTH SMOOTH GRANULE SMOOTH SMOOTH SMOOTH GRANULE SMOOTHXXXXX160 160 80 160170>80>85>40 >40160 20083 10218097>80 >80>40 >40100 100 60 >90 >9010 10 2 >15 >15>50 >5080 80 70 >80 >80+22 +22 +32

APP Modified Bitumen Part 2: Test Results1. COMPANY NAME TEXAS TEXSA S.A.REFINERYCORP.2. PRODUCT NAME MIGHTYPLATE MIN TEXAL-15FP-S3. PRODUCT DESCRIPTIONReinforcing POLYESTER POLYESTERTop surface SMOOTH GRANULE4. COMPLIES WITH:ASTM D 6222-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Materials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A.ASTM D 6223-98 Standard Specification for Atactic Polypropylene (APP) Modified BituminousSheet Material Using Polymer and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTERREINFORCEMENTSThickness (min., mils) Grade S Type I: 140; Type II: 150 157Thickness (min., mils) Grade G Type I: 160; Type II: 170 158Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 70; Type II: 80Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 85; Type II: 100Bottom coating thickness (min., mils) Type I: 30; Type II: 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OFPOLYESTER AND GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 140Thickness (min., mils) Grade G 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 75Net mass per unit area (min., lbs./100 sq. ft.) Grade G 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat conditioning, lbf.in., min. Type I: 50; Type II: 80Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. Type I: 23; Type II: 40Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 60; Type II: 90 180 132Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. Type I: 10; Type II: 15 45 40Elongation at 5% of max. load at 73.4 ±3.6 F, MD and XMD, % min. Type I: 30; Type II: 50Tear strength at 73.4 ±3.6 F, lbf, min Type I: 70; Type II: 80 100Low temperature flexibility, before and after heat conditioning, F, max. +32 +10 +16Dimensional stability, % change, max. 1 0.5High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2 0.2Moisture content, % max. 1 0.1Low temperature unrolling, F max. 416B. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBERREINFORCEMENTSMaximum load at 73.4 ±3.6 F MD and XMD, before and after heat condtioning, lbf/in., min. Type I: 65: Type II: 100Elongation at 73.4 ±3.6 MD and XMD, before and after heat conditioning, at max. load, % min. 3Maximum load at 0 ±3.6 F MD and XMD, lbf/in., min. Type I: 150; Type II: 200Elongation at 0 ±3.6 F MD and XMD, at max. load, % min. 3Tear strength at 73.4 ±3.6 F, lbf, min Type I: 120; Type II: 180Low temperature flexibility, before and after heat conditioning, F, max. +32Dimensional stability, % change, max. 1High temperature stability, F min. 230Granule embedment, Grade G only, max. loss, grams 2Water absorption, % max. 3.2Moisture content, % max. 1Low temperature unrolling, F max. 417. SEE APPENDIX IF CHECKED138

APP Modified Bitumen Part 2: Test ResultsU S INTEC, US INTEC, U S INTEC, U S INTEC, U S INTEC, U S INTEC, U S INTEC, U S INTEC,INC. INC. INC. INC. INC. INC. INC. INC.INTEC SP-4 INTEC GBSP-4 INTEC GBSP-4 INTEC GBSP- FLAME FLAME FLAME FLAMEFR 250-FR FREE FREE FREE FREE160S BASE 160 180 FRPOLYESTER POLYESTER POLYESTER PLOLYESTER POLY/GLAS POLY/GLASS POLY/GLASS POLY/GLASSSMOOTH GRANULE GRANULE GRANULE SMOOTH SMOOTH GRANULE GRANULEXXXXX X XX140160 160 1707085 85 10030 30 30 40140 70160 16075 8090 9040 NA 40 4050 50 50 8040 40 40 4070 70 70 9015 15 15 1530 30 30 5070 70 70 8023 23 23 231.0 1.0 1.0 1.0230 230 230 2302 2 2 1.23.2 3.2 3.2 3.21.0 1.0 1.0 1.041 41 41 41125 85 125 1303 5 3 3230 165 230 2203 4 3 3203 120 203 2303 3 3 30.3 0.1 0.2 0.2230 230 230 2302 2 1.2 1.23.2 3.2 3.2 3.21.0 1.1 1 141 41 41 41139

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME MILLENIUM MILLENIUMBASE SHEET SMOOTH3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 80 120Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 54 84Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 40 40 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 93 94Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 2.8 3.2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 72 72Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 2.9 3.3Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 104 104Low temperature flexibility, before and after heat conditioning, F, max. 0 -60 -60Dimensional stability, % max. 0.5 0.1 0.1Compound stability at 215 F no failures 220 220Granule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDALLIED SIGNAL, INC.140

SBS Modified Bitumen Part 2: Test ResultsALLIED SIGNAL, INC.BITEC INC.MILLENIUM MILLENIUM MILLENIUM MDS SPM-4.5T SPM-3.5H SFM-3.5H SPM-4HGMC SPM GPMFIBERGLASS POLY/SCRIM POLY/SCRIM POLYESTER POLYESTER POLYESTER FIBERGLASS POLYESTERGRANULE SMOOTH GRANULE GRANULE GRANULE GRANULE GRANULEXN/AN/AN/AX X X XN/A N/A N/A N/AN/A N/A N/A N/AN/A N/A N/A N/A1201508510040 40150 14010010040 70103 10331 3171 7736 36160 180 140 160108 123 100 10855 61 50 80124 124-60 -600.5 0.5220 22095 88.53.3 2.781 57.54.5 3.948.934.5105 126-60 00.1 0.06220 no failures

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME SPM-4H/250 SPS-3H3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced) X XType I, Grade S (smooth surfaced) N/A N/AType II, Grade G (granule surfaced N/A N/AType II, Grade S (smooth surfaced) N/A N/A5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115 120Thickness (min., mils) Grade G 130 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70 73Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 108Bottom coating thickness (min., mils) 40 80 606A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 76.7 76.7Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 22.1 22.1Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 60.4 60.4Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 57.4 57.4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 60.4 60.4Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 84.5 84.5Low temperature flexibility, before and after heat conditioning, F, max. 0 0 0Dimensional stability, % max. 1 ≤1 ≤1Compound stability at 215 F no failures no failures no failuresGranule embedment, Grade G only, max. grams 2

SBS Modified Bitumen Part 2: Test ResultsBITEC INC.PS-2H FS-2H COMPAFLASH FS-2H-FR SFM-3.5H-FR SFM-4H-FR FS-2H FS-25BFS-2HPLUSPOLYESTER FIBERGLASS POLYESTER FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASSSMOOTH SMOOTH SMOOTH SMOOTH GRANULE GRANULE SMOOTH SMOOTHXN/AN/AN/AXN/AN/AN/A80 80 88 40140 16047 47 60 25103 10540 40 70 80 40 2080 8047 474040 2091.3 91.32.7 2.780 80 57.5 57.5 70 606 6 3.9 3.9 6 348.9 48.934.5 34.5126 126+14 +14 0 0 +14 +140.06 0.06no failuresno failures

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME BITEC, INC. CERTAINTEED2. PRODUCT NAME FS-40 FLINTASTICGMS PREMIUM3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedXType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 60Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 180Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 105Bottom coating thickness (min., mils) 40 606A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 134Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 56Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 94Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 79Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 83Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 126Low temperature flexibility, before and after heat conditioning, F, max. 0 -15Dimensional stability, % max. 1 0.5Compound stability at 215 F no failures 250Granule embedment, Grade G only, max. grams 2 2.07. SEE APPENDIX IF CHECKED144

SBS Modified Bitumen Part 2: Test ResultsCERTAINTEED ROOFING PRODUCTS GROUPFLINTASTIC FLINTLASTIC FLEX-I-GLAS FR FLINTASTIC POLY SMS BLACK DIAMOND FLEXIGLAS FLEXIGLASFR-P FR-P PREMIUM BASE SHEET FR CAP BASE SHEET BASE SHEET BASE SHEET PREMIUM CAP 960POLYESTER POLYESTER FIBERGLASS FIBERGLASS POLYESTER FIBERGLASS FIBERGLASS FIBERGLASSGRANULE GRANULE SMOOTH SMOOTH SMOOTH GRANULE SMOOTH GRANULEXXXXX92 80140 50 16060 3090 40 10060 60 20 30 60172 180 9045105 10560 60 4090 90 55 55 551.5 1.5 1.5 1.5 365 66 49 49 882.5 2.5 3 3 55 5 5 5 505 5 5 5 4050 50 40 40 130-15 -15 -20 -8 -50.1 0.1 0.1 0.1 0.1250 250 250 250 2501.0 1.8103 134 10348 56 4870 94 7064 79 6470 83 70100 126 108-15 -15 1000.5 0.5 -15250 250 0.52.0 2.0 250145

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME FLINTLASTIC FLINTASTICGTSGMS3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedXType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 180 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 112 100Bottom coating thickness (min., mils) 40 80 606A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 134 103Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 56 48Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 94 70Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 79 74Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 83 70Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 110 100Low temperature flexibility, before and after heat conditioning, F, max. 0 -15 -15Dimensional stability, % max. 1 0.5 0.5Compound stability at 215 F no failures 250 250Granule embedment, Grade G only, max. grams 2 2.0 2.07. SEE APPENDIX IF CHECKEDCERTAINTEED146

SBS Modified Bitumen Part 2: Test ResultsDANOSA CARIBBEANESTERDAN RM GLASDAN GLASDAN ESTERDAN GLASDAN GLASDAN GLASDAN ESTERDANAL-80 R-36 R-36 AL-80-3 RM RM-5 RM-5POLYESTER FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS POLYESTERGRANULE ALUMINUM SMOOTH SMOOTH ALUMINUM GRANULE GRANULE GRANULE12980118 11870 70129 15880 9511870118 15870 95190 81.0 113.65.0 3.7 6.670.1 35.3 34.23.9 3.0 4.370 76.8 70-21 -21 -210.1 0.1no failures no failures no failuresna na na64.7 68.2 95.848.5 43.6 6.644.0 42.7 48.183.7 48.3 3.6125 104.3 41.6-21 -21 -21 -21 -210.6no failures no failures no failures no failures no falures20 na 2.0 2.0 2.0147

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME DANOSA DERMABIT2. PRODUCT NAME ESTERDAN ELASPHALT 4170RM-PLUSSMOOTH3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)X4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115 160Thickness (min., mils) Grade G 130 188Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 96Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 70Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 50Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 35Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 38Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 55Low temperature flexibility, before and after heat conditioning, F, max. 0 -21 0Dimensional stability, % max. 1 1Compound stability at 215 F no failures no failures no failuresGranule embedment, Grade G only, max. grams 2 2.07. SEE APPENDIX IF CHECKED148

SBS Modified Bitumen Part 2: Test ResultsDERMABITECOLOGY ROOF SYSTEMSELASPHALT 4170 ERS 501 ERS 502 EPS 503 ERS 504 ERS 505 ERS 507 ERS 602GRANULEPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASS POLY/GLASSGRANULE SMOOTH GRANULE SMOOTH GRANULE GRANULE GRANULE SMOOTHXXXXXXXX135 13516085 858540 40 40120115787340 40130160 160787840 40128 128 12828 28 2896 96 968 8 886 86 8638 38 38120 120 1200 0 00.7 0.7 0.7no failures no failures no failures155 1503 390 906 642 4224 24115 1150 00.6 0.6no failuresno failures470 109.25 109.2520 22 2250 110 11035 58 5855 74 7438 148 14855 0 00 1 1no failures no failures no failures2 4149

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME ERS 603 ERS 6043. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLY/GLASS POLY/GLASSTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfaced X XType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130 160 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75 85 85Bottom coating thickness (heat welding application products min., mils) 40 40 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125 128 128Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 28 28Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80 96 96Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 8 8Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75 86 86Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30 38 38Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90 120 120Low temperature flexibility, before and after heat conditioning, F, max. 0 0 0Dimensional stability, % max. 0.5 0.7 0.7Compound stability at 225 F no failures no failures no failuresGranule embedment, Grade G only, max., grams 2 46B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDECOLOGY ROOF SYSTEMS150

SBS Modified Bitumen Part 2: Test ResultsECOLOGYFIRESTONE BUILDING PRODUCTSERS 703 SBS SBS PREMIUM SBS SMOOTH SBS SBS FR SBS PREMIUM SBS PREMIUM FRBASE SHEET BASE SHEETFIBERGLASS FIBERGLASS FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERALUMINUM SMOOTH SMOOTH SMOOTH GRANULE GRANULE GRANULE GRANULEX150734090 9054 5414586150 150 160 16091 91 101 101160 70 702 1 190 30 304 2 24220110 35 350 0 00.5 0.5 0.5no failures >225 >22570 70 70 100 10030 30 30 20 2050 50 50 70 7035 35 35 50 5055 55 55 70 700 0 0 0 01 1 1 1 1225 225 225 225 2252 2 2151

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME SBS TORCH SBS FLASHING3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 150 150Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 93 91Bottom coating thickness (min., mils) 40 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 70 70Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 20 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 50 50Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 35 35Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 55 55Low temperature flexibility, before and after heat conditioning, F, max. 0 0 0Dimensional stability, % max. 1 1 1Compound stability at 215 F no failures 225 225Granule embedment, Grade G only, max. grams 2 2 27. SEE APPENDIX IF CHECKEDFIRESTONE152

SBS Modified Bitumen Part 2: Test ResultsFIRESTONE BUILDING PRODUCTSGAF MATERIALS CORP.SBS GLASS SBS POLY SBS FR RUBEROID MOP RUBEROID MOP RUBEROID MOP RUBEROID MOP RUBEROIDTORCH BASE TORCH BASE TORCH PLUS FR (GRANULE) 170 FR 20FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASSGRANULE GRANULE GRANULE GRANULE GRANULE GRANULE GRANULE SMOOTHXXXXX80120458240 NA120 175 145 145 145 14582 120 90 90 75 7540 40 40 40 40 4070 701 230 302 23335 400 00 0.5225 215NA70 70 100 100 70 7020 20 20 20 20 2050 50 70 70 50 5035 35 50 50 40 4060 60 40 4055 55 70 70 70 700 0 0 0 0 01 1 1.0 1.0 1.0 1.0225 225 215 215 215 2152 2 2 2153

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME RUBEROID RUBEROID30 30 FR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced) X XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 160 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 65 65Bottom coating thickness (min., mils) 40 NA NA5C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 70 70Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 2 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 40 40Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 2 2Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40 3 3Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20 3 3Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 40 40Low temperature flexibility, before and after heat conditioning, F, max. 0 0 0Dimensional stability, % max. 0.5 0.5 0.5Compound stability at 215 F no failures 215 215Granule embedment, Grade G only, max. grams 2 2 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDGAF MATERIALS CORP154

SBS Modified Bitumen Part 2: Test ResultsGAF MATERIALS CORP.RUBEROID MOP RUBERIOD SBS HW RUBEROID SBS HW RUBEROID SBS HW RUBEROID SBS HW RUBEROID SBS HW MODIFIED BASE MODIFIED CAP(SMOOTH) (SMOOTH) (GRANULES) (FR) (PLUS) (PLUS FR) SHEET SHEET 601+POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASSSMOOTH SMOOTH GRANULE GRANULE GRANULE GRANULE SMOOTH GRANULEXXXXX XX X18.98045NA13065NA140 149145 145 145 14554 5475 75 90 9040 40 40 40 40 40470 701 230 401 23 33 335 4000.5 0.5215 215NA 270 70 70 70 100 10020 20 20 20 20 2050 50 50 50 70 7040 40 40 40 50 5040 40 40 40 60 6070 70 70 70 70 700 0 0 0 0 01.0 1.0 1.0 1.0 1.0 1.0215 215 215 215 215 215NA NA 2 2 2 2155

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME GAF IKO IND.2. PRODUCT NAME ULTRACLAD MODIFLEXSBSMP-180-CAP3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS POLYESTERTop surface (indicate granule or smooth) FOIL GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)X4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 40 NA5C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 138Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 88Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90 90Low temperature flexibility, before and after heat conditioning, F, max. 0 0Dimensional stability, % max. 0.5 0.5Compound stability at 225 F no failures 225Granule embedment, Grade G only, max., grams 2 NA6B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 70Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 85Low temperature flexibility, before and after heat conditioning, F, max. 0 -5Dimensional stability, % max. 1 0.35Compound stability at 215 F no failures no failuresGranule embedment, Grade G only, max. grams 2 0.47. SEE APPENDIX IF CHECKED156

SBS Modified Bitumen Part 2: Test ResultsIKO INDUSTRIES, INC.MODIFLEX TORCHFLEX MODIFLEX MODIFLEX MODIFLEX TORCHFLEX TORCHFLEX MODIFLEXMP-250-CAP TP-180-CAP MF-95-FS BASE MP-180-FS-BASE MP-180-SS-BASE TP-250-CAP TP-250-CAP (5mm) MF-95-SS-BASEPOLYESTER POLYESTER FIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER FIBERGLASSGRANULE GRANULE SMOOTH SMOOTH SMOOTH GRANULE GRANULE SANDXXXXXX X X87 8756 57158 158 87 87 158 19697 99 56 56 99 11955 554 473 73-26 -220.0 0.0no failuresno failures115 70 70 70 107 10751 50 55 55 50 50123 85 75 75 123 123-10 -5 -5 -5 -5 -50.35 0.35 0.35 0.35 0.35 0.35no failures no failures no failures no failures no failures no failures0.4 0.4 0.4 0.4157

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME TORCHFLEX TORCHFLEXTF-95-FF-BASE TF-95-FF-BASE (22)3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced) X XType II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 118 87Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 79 56Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 55 55Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 73Low temperature flexibility, before and after heat conditioning, F, max. 0 -22 -22Dimensional stability, % max. 0.5 0.0Compound stability at 215 F no failures no failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDIKO INDUSTRIES INC.158

SBS Modified Bitumen Part 2: Test ResultsIKO INDUSTRIES, INC.JOHNS MANVILLE INTERNATIONAL INC.TORCHFLEX ARMOUR BOND ARMOUR BOND ARMOUR ARMOUR GARD DYNAGLAS DYNAPLY DYNAGLAS FRTP-180-FF-BASE 95 180 BRIDGE/PONT ICE & WATERPOLYESTER FIBERGLASS POLYESTER POLYESTER FIBERGLASS FIBERGLASS COMBINATION FIBERGLASSSMOOTH SMOOTH SMOOTH GRANULE SAND GRANULE GRANULE GRANULEXXXXXX12587118 9875 6363 150 15037 90 10011875217144125480675125125-100.2no failures95 954 474 55 45 58 554 4 5 58 85 575 73 100 100-15 -22 -22 -10 -100.5 0.0 0.0 0.2 0.2no failures no failures 212 no failures no failures2 270 74 745075 85-5 -15 -40.35 0.5 0.5no failures no failures no failures0.4159

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME DYNALASTIC DYNALASTIC250 1803. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedXType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 160 150Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 100 100Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 115 80Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 45 35Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 125 54Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 94 57Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 60 40Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 120 80Low temperature flexibility, before and after heat conditioning, F, max. 0 -10 -10Dimensional stability, % max. 1 0.7 0.7≤1 Compound stability at 215 F no failures no failures no failuresGranule embedment, Grade G only, max. grams 2 2 27. SEE APPENDIX IF CHECKEDJOHNS MANVILLE160

SBS Modified Bitumen Part 2: Test ResultsJOHNS MANVILLE INTERNATIONALDYNALASTIC DYNAGLAS DYNABASE DYNALASTIC DYNALASTIC DYNAMAX DYNAMAX FR DYNAKAP180 FR 30 FR 180S 250 FRPOLYESTER FIBERGLASS FIBERGLASS POLYESTER POLYESTER COMBINATION COMBINATION COMBINATIONGRANULE GRANULE GRANULE GRANULE GRANULE GRANULE GRANULE GRANULEXXXXX160 180 16099 115 115130 10090 50150 118 16085 90 100300 300 1504 4 4308 308 817 7 5100 100 7550 50 30350 350 125-20 -15 -100.2 0.2 0.2no failures no failures no failures2 2 285 703 450 415 56 64 490 90-10 -100.2 0.2no failuresno failures280 80 1535 35 4550 54 12548 57 9040 40 6080 80 120-10 -10 -100.7 0.7 0.7no failures no failures no failures2 2161

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME MANVILLE MALARKEY2. PRODUCT NAME DYNAKAP PREMIUM SBSFR 6013. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) COMBINATION COMBINATIONTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130 160 120Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75 115 102Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125 150 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4 4Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80 81Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 5Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90 125 90Low temperature flexibility, before and after heat conditioning, F, max. 0 -10Dimensional stability, % max. 0.5 0.2Compound stability at 225 F no failures no failuresGranule embedment, Grade G only, max., grams 2 2 0.56B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKED162

SBS Modified Bitumen Part 2: Test ResultsMALARKEYMONSEY BAKOR - DIV. OF HENRY CO.PARAGON PANOPLY G100 s/s G 100 p/s G 100 p/p NP 180 s/s NP 180 p/p NP 180 p/sSBS 625 SBS 650FIBERGLASS FIBERGLASS GLASS GLASS GLASS POLYESTER POLYESTER POLYESTERGRANULE GRANULE SMOOTH SMOOTH SMOOTH SMOOTH SMOOTH SMOOTHXX X XX X X125 150102 12080 91 87 12051 56 57 774087 9020092 52110 200 127 132 1504 4.2 4.265 105 51 44 414 4 2.9 3 3.20.5 0.583 90 98-15 -10 00.1 0.7 .13pass pass pass88 88 9037 37 4068 68 7360 60 5188 88 80-10 -10 -10.48 .24 .93pass pass pass163

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME G 100gMFR 170 MOPGRANULE3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) GLASS POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 157 157Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 114 99Bottom coating thickness (min., mils) 40 40 485C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 102Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 5.0Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 53Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 19.5Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 93Low temperature flexibility, before and after heat conditioning, F, max. 0 0Dimensional stability, % max. 0.5 0.06Compound stability at 215 F no failures passGranule embedment, Grade G only, max. grams 2 0.276C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 116Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 28Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 61Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 55Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 87Low temperature flexibility, before and after heat conditioning, F, max. 0 -10Dimensional stability, % max. 1 .34Compound stability at 215 F no failures passGranule embedment, Grade G only, max. grams 2 2.07. SEE APPENDIX IF CHECKEDMONSEY BAKOR DIVISION164

SBS Modified Bitumen Part 2: Test ResultsMONSEY BAKOR DIVISION OF HENRY CO.170 TORCH NP 180gM NP 180gT NP 180gM FR NP 180gT FR NP 250gM NP 250gT NP 250gM FRGRANULEPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERGRANULE GRANULE GRANULE GRANULE GRANULE GRANULE GRANULE GRANULEX X X X XX X X159 157 181 151 160 173 15792 92 102 108 95 104 10751 84 48 48 42 40 4015310347102 85 100 72 81 103 127 10022 41 38 40 36 40 46 3965 91 65 65 61 72 88 8874 61 57 84 76 61 52 8594 91 92 91 92 105 121 88-10 -10 -10 0 -5 -10 -15 -100.4 .38 .47 0.6 0.4 .46 .32 0.3pass pass pass pass pass pass pass pass1.9 1.16 1.20 .18 1.05 1.03 1.20 1.11165

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME MONSEY POLYGLASS2. PRODUCT NAME NP 250gT FR ELASTOSHIELDTS 43. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedXType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 151Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 99Bottom coating thickness (min., mils) 40 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 180Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 40 1006A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 100 85Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 44 30Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 83 60Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 75 45Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 50Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 121 80Low temperature flexibility, before and after heat conditioning, F, max. 0 0 -5Dimensional stability, % max. 1 0.9 0.5Compound stability at 215 F no failures pass no failuresGranule embedment, Grade G only, max. grams 2 0.13 27. SEE APPENDIX IF CHECKED166

SBS Modified Bitumen Part 2: Test ResultsPOLGLASS USASIPLAST, INC.ELASTOFLEX ELASTOFLEX ELASTOFLEX ELASTOBASE ELASTOFLEX ELASTOFLEX ELASTOFLEX PARADIENES 6 GS 6 GS 6-FR V VG VG-FR 20POLYESTER POLYESTER POLYESTER FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASSSMOOTH GRANULE GRANULE SMOOTH SMOOTH GRANULE GRANULE SMOOTHXXXXXXX80 120 91140 14081 71 5883 8312081140 14083 8380 90 90 90 702.5 3 3 3 340 45 45 45 302.5 3 3 3 320 30 30 303.0 3.0 3.0 3.070 75 75 75 400 0 0 0 -50.5 0.5 0.5 0.5 0.1no failures no failures no failures no failures no failures2 280 80 8025 25 2560 60 6040 40 4045 45 4580 80 800 0 00.5 0.5 0.5no failures no failures no failures2 2167

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME PARADIENE PARADIENE20 HT 20 PR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS COMBINATIONTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80 91Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50 55Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 91Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 58Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125 150Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 5Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90 120Low temperature flexibility, before and after heat conditioning, F, max. 0 -5Dimensional stability, % max. 0.5 0.2Compound stability at 225 F no failures no failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 5Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 120Low temperature flexibility, before and after heat conditioning, F, max. 0 -5Dimensional stability, % max. 0.5 0.1Compound stability at 215 F no failures no failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDSIPLAST, INC.168

SBS Modified Bitumen Part 2: Test ResultsSIPLAST, INC.PARADIENE PARADIENE PARADIENE PARADIENE PARAFOR VERAL VERAL VERAL20 EG 30 30 HT 40 FR 50 LT ALUMINUM FACE COPPER STAINLESS STEELFIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS COMBINATION FIBERGLASS FIBERGLASS FIBERGLASSSMOOTH GRANULE GRANULE GRANULE GRANULE ALUMINUM COPPER STAINLESS STEEL1801299011880130 130 15082 83 103170480512000.2no failures1150 70 150 1504 3 5 480 30 80 805 3 4 5120 40 120 120-5 -5 -5 00.1 0.1 0.1 0.1no failures no failures no failures no failures1.5 1.5 1.5X X X169

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME PARADIENE PARADIENE20 HV 20 TG3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS FIBERGLASSTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80 119 110Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 69Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 40 705C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 75 75Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 3 3Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 30 30Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 3 3Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 40 40Low temperature flexibility, before and after heat conditioning, F, max. 0 -5 -5Dimensional stability, % max. 0.5 0.1 0.1Compound stability at 215 F no failures no failures no failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDSIPLAST, INC.170

SBS Modified Bitumen Part 2: Test ResultsSIPLAST, INC.SOPREMA, INC.PARADIENE PARADIENE PARADIENE PARADIENE PARADIENE PARADIENE SOPRALENE SOPRALENE20 HT TG 20 PR TG 20 EG TG 20 HV TG 30 TG 20 HT TG 180 FLAM 180FIBERGLASS COMBINATION FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS POLYESTER POLYESTERSMOOTH SMOOTH SMOOTH SMOOTH GRANULE GRANULE SMOOTH SMOOTHXX1106370110 138 138150 15069 87 8799 9970 90 90 70 70120 12076 7240150480512000.2no failures150 150 75 75 1504 4 3 3 380 80 30 30 805 5 3 3 3120 120 40 40 120-5 0 0 -5 -50.1 0.1 0.1 0.1 0.1no failures no failures no failures no failures no failures1.5 1.585 8522 2265 6550 5087 87-5 -50.5 0.5250 250171

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME SOPRALENE SOPRALENE180 GR FLAM 180 GR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced) X XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 160 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 99 101Bottom coating thickness (min., mils) 40 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 26C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 85 85Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 22 22Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 65 65Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 50 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 87 87Low temperature flexibility, before and after heat conditioning, F, max. 0 -5 -5Dimensional stability, % max. 1 0.5 0.5Compound stability at 215 F no failures 250 250Granule embedment, Grade G only, max. grams 2 2 27. SEE APPENDIX IF CHECKEDSOPREMA, INC.172

SBS Modified Bitumen Part 2: Test ResultsSOPREMA, INC.SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE SOPRALENE ELASTOPHENE ELASTOPHENE250 FLAM 250 250 GR FLAM 250 GR 250 350 GR FLAMPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER GLASS GLASSSMOOTH SMOOTH GRANULE GRANULE SMOOTH GRANULE SMOOTH SMOOTHXXX X XX X X90 12060 7840160 120 160160 160 200101 98 99101 99 12540 40 40 4091 914 441 414 473 73-5 -50 0250 250115 115 115 115 150 15028 28 28 28 35 35100 100 100 100 130 13055 55 55 55 53 53125 125 125 125 160 160-5 -5 -5 -5 -5 -50.3 0.3 0.3 0.3 0.2 0.2250 250 250 250 250 2501 1 1173

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME ELASTOPHENE SOPRALENEGR180 FR GR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) GLASS POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 136Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 85Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 101Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 91Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 41Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 73Low temperature flexibility, before and after heat conditioning, F, max. 0 -5Dimensional stability, % max. 0.5 0Compound stability at 215 F no failures 250Granule embedment, Grade G only, max. grams 2 16C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 85Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 22Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 65Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 87Low temperature flexibility, before and after heat conditioning, F, max. 0 -5Dimensional stability, % max. 1 0.5Compound stability at 215 F no failures 250Granule embedment, Grade G only, max. grams 2 17. SEE APPENDIX IF CHECKEDSOPREMA, INC.174

SBS Modified Bitumen Part 2: Test ResultsSOPREMA, INC.SOPRALENE SOPRALENE SOPRALENE ELASTOPHENE ELASTOPHENE ELASTOHPENE ELASTOPHENE ELASTOPHENEFLAM 180 FR GR 250 FR GR FLAM 250 FR GR FLAM GR PS 180 180 PS FLAM FR GRPOLYESTER POLYESTER POLYESTER POLYESTER GLASS POLYESTER POLYESTER GLASSGRANULE GRANULES GRANULE GRANULE SMOOTH SMOOTH SMOOTH GRANULEXXXXXXX120148 1486094 9640 4090 90160 160 16055 52101 101 11740 40 4091 91 914 4 441 41 414 4 473 73 73-5 -5 -50 0 0250 250 250185 115 115 85 8522 22 28 22 2265 100 100 65 6550 55 55 50 5087 125 125 87 87-5 -5 -5 -5 -50.5 0.3 0.3 0.5 0.5250 250 250 250 2501 1 1175

SBS Modified Bitumen Part 2: Test Results2. PRODUCT NAME ELASTOPHENE SOPRALAST 50FR GRTV ALU3. PRODUCT DESCRIPTION \Reinforcing (indicate polyester or combination) GLASS GLASSTop surface (indicate granule or smooth) GRANULE ALUMINUMCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlassFiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 136 160Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 88 92Bottom coating thickness (min., mils) 40 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 91 175Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4 8Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 41 134Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4 9.6Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 73 130Low temperature flexibility, before and after heat conditioning, F, max. 0 -5 -15Dimensional stability, % max. 0.5 0 0.1Compound stability at 215 F no failures 250Granule embedment, Grade G only, max. grams 2 16C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDSOPREMA INC.176

SBS Modified Bitumen Part 2: Test ResultsSOPREMA, INC.SOPRALAST SOPRALAST SOPRAFIX (F) SOPRALENE SOPRALENE ELASTOPHENE LASTOBOND COLPHENE GRTV COPPER 50 TVI NOX (H) (S) (T) 250 PS 180 SP 3.5mm 3.0mmFIBERGLASS GLASS POLYESTER POLYESTER POLYESTER GLASS GLASS GLASSCOPPER STAINLESS SMOOTH SMOOTH SMOOTH SMOOTH SMOOTH GRANULEXXXX120 68140 148 14090 3887 95 8340 40120 120 14073 72 8640 40 40175 175 91 91 918 8 4 4 4134 134 41 41 419.6 9.6 4 4 4130 130 73 73 73-15 -15 -5 -5 -50.1 0.1 0 0 0250185 150 8522 35 2265 130 6550 53 5087 160 87-5 -5 -50.5 0.2 0.5250 250 250177

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME COLPHENE COLPHENEFR GRHR GR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) GLASS GLASSTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 140 140Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 83 85Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 91 175Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 4 10Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 41 130Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4 8Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 73 130Low temperature flexibility, before and after heat conditioning, F, max. 0 -5 -5Dimensional stability, % max. 0.5 0 0Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 2 1 16C. PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 1Compound stability at 215 Fno failuresGranule embedment, Grade G only, max. grams 27. SEE APPENDIX IF CHECKEDSOPREMA, INC.178

SBS Modified Bitumen Part 2: Test ResultsSOPREMA, INC.TAMKO ROOFING PRODUCTS INC.COLPHENE SOPRAFIX AWAPLAN AWAPLAN AWAPLAN AWAPLAN AWAPLAN AWAPLANHR FR GR (X) PREMIUM 170 PREMIUM FR 170 FR VERSA-SMOOTH HEAT WELDINGFIBERGLASS POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERGRANULE SMOOTH GRANULE GRANULE GRANULE GRANULE SMOOTH GRANULEXXXXX X X14085160 155 160154 155 154 185112 98100 96 100 9640 >40 >40 >40 >40 >40 >40175101308130-501115 >100 >90 >100 >90 >70 >10025 >20 >20 >20 >20 >20 >20100 >100 >50 >100 >50 >50 >10055 >50 >35 >50 >35 >35 >50>60 >38 >60 >38 >38 >60125 >70 >55 >70 >55 >55 >70-5

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME VERSA-FLEX VERSA-BASE3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) POLYESTER FIBERGLASSTop surface (indicate granule or smooth) SMOOTH SMOOTHCOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)XType II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)XType II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45 92Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75Bottom coating thickness (min., mils) 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115 115Thickness (min., mils) Grade G 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70 76Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90Bottom coating thickness (min., mils) 40 >406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 >70Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 >1Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 >30Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 >2Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40 >3Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20 >3Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 >35Low temperature flexibility, before and after heat conditioning, F, max. 0 100Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 >50Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 >60Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 >70Low temperature flexibility, before and after heat conditioning, F, max. 0

SBS Modified Bitumen Part 2: Test ResultsTEXSA, S.A.TREMCO INC.TEXAL-10 FV MIN MOFLEX-20 TEXSELF MINERAL MP POWERPLY POWERPLY POWERPLY POWERPLY3MM FP-S 5KG FM STANDARD FR HE FR PREMIUM FR PREMIUM SMOOTHFIBERGLASS POLYESTER COMPOSITE FIBERGLASS POLYESTER COMBINATION COMBINATIONSMOOTH GRANULE GRANULE GRANULE GRANULE GRANULES SMOOTHXXXX158 150102 93.440 508046.1120120518840 50158 17568 10440 78.8240.9 235.23.3 4.0217 276 219.950 6.7 7.2379120 -22 416.7+5 0 -16.60 no failures no failures239 0.4912.8558 760 7.7+23 1040 -40250 no failures1.59227.4159 159 73.645 45 55.188.8+5 +5 -40.5 0.5 0250 212 no failures1.7181

SBS Modified Bitumen Part 2: Test Results1. COMPANY NAME2. PRODUCT NAME INTEC/FLEX INTEC/FLEXFR 3 HS190 FR3. PRODUCT DESCRIPTIONReinforcing (indicate polyester or combination) FIBERGLASS POLYESTERTop surface (indicate granule or smooth) GRANULE GRANULECOMPLIES WITH:4A. ASTM D 6162-97 Standard Specification for Styrene Budadiene Styrene (SBS) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedXType II, Grade S (smooth surfaced)4B. ASTM D 6163-97 Standard Specification for Styrene Butadiene Styrene (SBS) Bituminous Materials UsingGlass Fiber Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)Type I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)4C. ASTM D 6164-97 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous SheetMaterials Using Polyester Reinforcements (indicate type and grade, or NA)Type I, Grade G (granule surfaced)XType I, Grade S (smooth surfaced)Type II, Grade G (granule surfacedType II, Grade S (smooth surfaced)5A. DIMENSIONS AND MASSES OF SHEET MATERIALS: COMBINATION OF POLYESTER ANDGLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S Type I: 70; Type II: 80Thickness (min., mils) Grade G Type I: 110; Type II: 130Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 45; Type II: 50Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 60; Type II: 75Bottom coating thickness (heat welding application products min., mils) 405B. DIMENSIONS AND MASSES OF SHEET MATERIALS: GLASS FIBER REINFORCEMENTSThickness (min., mils) Grade S 80Thickness (min., mils) Grade G Type I: 95: Type II: 105 140Net mass per unit area (min., lbs./100 sq. ft.) Grade S 45Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 65; Type II: 75 75Bottom coating thickness (min., mils) 40 405C. DIMENSIONS AND MASSES OF SHEET MATERIALS: POLYESTER REINFORCEMENTSThickness (min., mils) Grade S Type I: 85; Type II: 115Thickness (min., mils) Grade G 130 145Net mass per unit area (min., lbs./100 sq. ft.) Grade S Type I: 54; Type II: 70Net mass per unit area (min., lbs./100 sq. ft.) Grade G Type I: 75; Type II: 90 75Bottom coating thickness (min., mils) 40 406A. PHYSICAL PROPERTIES: COMBINATION OF POLYESTER AND GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 75; Type II: 125Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning Type I: 1; Type II: 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 75; Type II: 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 26; Type II: 75Elongation at 5% max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 9; Type II: 30Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 65; Type II: 90Low temperature flexibility, before and after heat conditioning, F, max. 0Dimensional stability, % max. 0.5Compound stability at 225 Fno failuresGranule embedment, Grade G only, max., grams 26B. PHYSICAL PROPERTIES: GLASS FIBER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf./in. Type I: 70: Type II: 150 150Elongation at 0 ± 3.6 F, MD and XMD, min., at max. load, before and after heat conditioning Type I: 1; Type II: 2 2Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 30; Type II: 80 80Elongation at 73.4 ± 3.6 F MD and XMD, % min., at max. load, before and after heat conditioning Type I: 2; Type II: 4 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., as manufactured Type I: 3: Type II: 40 4Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., after heat conditioning Type I: 3: Type II: 20 20Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 35; Type II: 110 110Low temperature flexibility, before and after heat conditioning, F, max. 0 0Dimensional stability, % max. 0.5 0.5Compound stability at 215 F no failures 215Granule embedment, Grade G only, max. grams 2 26.C PHYSICAL PROPERTIES: POLYESTER REINFORCEMENTSMaximum load at 0 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/.in. Type I: 70: Type II: 100 70Elongation at 0 ± 3.6 F, MD and XMD, % min., at max. load, before and after heat conditioning 20 20Maximum load at 73.4 ± 3.6 F MD and XMD, min., before and after heat conditioning, lbf/in. Type I: 50; Type II: 100 50Elongation at 73.4 ± 3.6 F MD and XMD, % min. at max. load, before and after heat conditioning Type I: 35; Type II: 50 40Elongation at 5% of max. load 73.4 ± 3.6 F, MD and XMD, % min., before and after heat conditioning Type I: 38: Type II: 60 40Tear strength at 73.4 ± 3.6 F, lbf, min. Type I: 55; Type II: 70 70Low temperature flexibility, before and after heat conditioning, F, max. 0 0Dimensional stability, % max. 1 1.0Compound stability at 215 F no failures 215Granule embedment, Grade G only, max. grams 2 27. SEE APPENDIX IF CHECKEDU S INTEC182

SBS Modified Bitumen Part 2: Test ResultsU S INTEC, INC.INTEC/FLEX INTEC/FLEX FLEXBASE INTEC MODIFIED INTEC/FLEX M INTEC/FLEX 190 INTEC/FLEX INTEC/FLEX S250 FR GR 4 CAP 60 FR BASE PLUS FR 4.5POLYESTER FIBERGLASS FIBERGLASS FIBERGLASS POLYESTER POLYESTER FIBERGLASS POLYESTERGRANULE GRANULE SMOOTH SMOOTH GRANULE GRANULE GRANULE SMOOTHXXXXXXXXXX80 80130 13045 4565 65NA NA NA NA140145 145 1455490 90 7540 40 40 4070 70 70 702 2 2 240 40 40 402 2 2 23 3 3 33 3 3 340 40 40 400 0 0 00.5 0.5 0.5 0.5215 215 215 2152 NA NA 2100 100 70 7020 20 20 2070 70 50 5050 50 40 4060 60 40 4070 70 70 700 0 0 01.0 1.0 1.0 1.0215 215 215 2152 2 2 NA2183

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETCOMPANY NAMEALLIED SIGNAL, INC.NEW/REPLACEMENTNON-NAILABLEM-100-MN-NN 2 BLACK ARMOR-ORGANIC MILLENNIUM GMCM-120-MP-NN 3 2 BLACK ARMOR TC GLASS MILLENNIUM GMCM-140-MP-NN 3 BLACK ARMOR ORGANIC MILLENNIUM BASE MILLENIUM GMCM-145-MP-NN 3 MILLENNIUM BASE MILLENIUM SMOOTH MILLENNIUM GMCM-150-MP-NN 2 NONE MILLENNIUM SMOOTH MILLENNIUM GMCM-160-MP-NN 4 3 BLACK ARMOR TC GLASS MILLENNIUM GMCM-100-C-NN 2 MILLENNIUM BASE MILLENNIUM BMCM-140-C-NN 3 MILLENNIUM BASE MILLENNIUM BASE MILLENNIUM GMCM-145-C-NN 3 MILLENNIUM BASE MILLENNIUM SMOOTH MOP MILLENNIUM GMCM-150-C-NN 2 NONE MILLENNIUM SMOOTH MOP MILLENNIUM GMCM-100-MP-N 2 BLACK ARMOR ORGANIC MILLENNIUM GMCM-120-MP-NN 4 BLACK ARMOR ORGANIC BASE MILLENNIUM GMC& 2 BLACK ARMOR TC GLASS IVM-140-MP-N 3 BLACK ARMOR ORGANIC BASE MILLENNIUM BASE SHEET MILLENNIUM GMCM-145-MP-NN 3 MILLENNIUM BASE SHEET MILLENNIUM SMOOTH MILLENNIUM GMCM-160-MP-NN 5 BLACK ARMOR BASE & MILLENNIUM GMC3 BLACK ARMOR TC GLASSM-100-C-N 2 MILLENNIUM BASE SHEET MILLENNIUM GMCM-140-C-N 3 MILLENNIUM BSE SHEET MILLENNIUM BASE SHEET MILLENNIUM GMCM-145-C-N 3 MILLENNIUM BASE SHEET MILLENNIUM SMOOTH MOP MILLENNIUM GMCI-100-MA-NN 2 BLACK ARMOR BASE SHEET INFINITEE 30 GMCI-105-PM-NN 2 POLYMOP BASE SHEET INFINITEE 30 GMCI-120-MA-NN 3 2 BLK ARMOR TYPE IV GLASS INFINITEE 30 GMCI-125-PM-NN 3 2 POLYMOP PLY TYPE IV INFINITEE 30 GMCI-130-MA-NN 2 NONE INFINITEE 20 SM INFINITEE 30 GMCI-135-PM-NN 2 NONE INFINITEE 20 SM INFINITEE 30 GMCI-140-MA-NN 3 BLACK ARMOR BASE SHEET INFINITEE 20 SMI-145-PM-NN 3 POLYMOP BASE SHEET INFINITEE 20 SMI-160-MA-NN 4 3 BLK ARMOR TYPE IV GLASS INFINITEE 30 GMCI-165-PM-NN 4 3 POLYMOP TYPE IV INFINITEE 30 GMCI-100-C-NN 2 BLACK ARMOR BASE INFINITEE 30 GMCI-105-C-NN 2 POLYMOP BASE SHEET INFININITEE 30 GMCI-140-C-NN 3 BLACK ARMOR BSE POLYMOP BASE SHEET INFINITEE 30 GMCI-145-C-NN 3 POLYMOP BASE SHEET POLYMOP BASE SHEET INFINITEE 30 GMCI-150-C-NN 3 BLACK ARMOR BASE SHEET INFINITEE 20 SM INFINITEE 30 GMCI-145-T-NN 3 BLACK ARMOR BASE SHEET INFINITEE ST INFINITEE GTCNEW/REPLACEMENTNAILABLEI-100-MA-N 2 BLACK ARMOR BASE SHEET INFINITEE 30 GMCI-105-PM-N 2 POLYMOP BASE SHEET INFINITEE 30 GMCI-120-MA-N 4 BLACK ARMOR BASE SHEET & INFINITEE 30 GMC2 BLK ARMOR TYPE IV GLASSI-125-PM-N 4 POLYMOP BASE SHEET & INFINITEE 30 GMC2 POLY MOP PLY IVI-140-MA-N 3 BLACK ARMOR BASE SHEET INFINITEE 20 SM INFINITEE 30 GMCI-145-PM-N 3 POLY MOP BASE SHEET INFINITEE 20 SM INFINTEE 30 GMCI-160-MA-N 5 BLACK ARMOR BASE SHEET & INFINITEE 30 GMC3 BLACK ARMOR TYPE IV GLASSI-165-PM-N 5 POLYMOP BASE SHEET & 3 INFINITEE 30 GMCPOLYMOP PLY IVI-100-C-N 2 BLACK ARMOR BASE SHEET INFINITEE 30 GMCI-105-C-N 2 POLYNOIP BASE SHEET INFINITEE 30 GMCI-140-C-N 3 BLACK ARMOR BASE SHEET POLY MOP BASE SHEET INFINITEE 30 GMCI-145-C-N 3 POLYMOP BSAE SHEET POLYMOP BSAE SHEET INFINITEE 30 GMCI-150-C-N 3 BLACK ARMOR BASE SHEET INFINITEE 20 SM INFINITEE 30 GMCI-100-T-N 2 BLACK ARMOR BASE SHEET INFINITEE GTCI-140-T-N 3 BLACK ARMOR BASE SHEET INFINITEE ST INFINITEE GTCNEW/REPLACEMENTINSULATEDM-100-MN-NN 2 BLACK ARMOR-ORGANIC MILLENNIUM GMCM-120-MP-NN 3 2 BLACK ARMOR TC GLASS MILLENNIUM GMCM-140-MP-NN 3 BLACK ARMOR ORGANIC MILLENNIUM BASE MILLENNIUM GMCM-145-MP-NN 3 MILLENNIUM BASE MILLENIUM SMOOTH MILLENNIUM GMCM-150-MP-NN 2 NONE MILLENNIUM SMOOTH MILLENNIUM GMCM-160-MP-NN 4 3 BLACK ARMOR TC GLASS MILLENNIUM GMCM-100-C-NN 2 MILLENNIUM BASE MILLENNIUM BMCM-140-C-NN 3 MILLENNIUM BASE MILLENNIUM BASE MILLENNIUM GMCM-145-C-NN 3 MILLENNIUM BASE MILLENNIUM SMOOTH MOP MILLENNIUM GMCM-150-C-NN 2 NONE MILLENNIUM SMOOTH MOP MILLENNIUM GMCI-100-MA-NN 2 BLACK ARMOR BASE SHEET INFINITEE 30 GMCI-105-PM-NN 2 POLYMOP BASE SHEET INFINITEE 30 GMCI-120-MA-NN 3 2 BLK ARMOR TYPE IV GLASS INFINITEE 30 GMCI-125-PM-NN 3 2 POLYMOP PLY TYPE IV INFINITEE 30 GMCI-130-MA-NN 2 NONE INFINITEE 20 SM INFINITEE 30 GMC184

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETI-135-PM-NN 2 NONE INFINITEE 20 SM INFINITEE 30 GMCI-140-MA-NN 3 BLACK ARMOR BASE SHEET INFINITEE 20 SMI-145-PM-NN 3 POLYMOP BASE SHEET INFINITEE 20 SMI-160-MA-NN 4 3 BLK ARMOR TYPE IV GLASS INFINITEE 30 GMCI-165-PM-NN 4 3 POLYMOP TYPE IV INFINITEE 30 GMCI-100-C-NN 2 BLACK ARMOR BASE INFINITEE 30 GMCI-105-C-NN 2 POLYMOP BASE SHEET INFININITEE 30 GMCI-140-C-NN 3 BLACK ARMOR BSE POLYMOP BASE SHEET INFINITEE 30 GMCI-145-C-NN 3 POLYMOP BASE SHEET POLYMOP BASE SHEET INFINITEE 30 GMCI-150-C-NN 3 BLACK ARMOR BASE SHEET INFINITEE 20 SM INFINITEE 30 GMCI-145-T-NN 3 BLACK ARMOR BASE SHEET INFINITEE ST INFINITEE GTCRECOVEREXISTING ROOFn/aRECOVEREXISTING ROOFINSULATION ADDEDn/aCOMPANY NAMEBITEC INC.NEW / REPLACEMENTNON-NAILABLEAPS-4T.1 2 BETA BASE APS-4TAPM-4T.1 2 BETA BASE APM-4TAPM-4.5T.1 2 BETA BASE APM-4.5TSPM-4.5T.1 2 BETA BASE SPM-4.5TSPM-3.5H.1 2 BETA BASE SPM-3.5HSFM-3.5H.1 2 BETA BASE SFM-3.5HSPM-4H.1 2 BETA BASE SPM-4HSPS-3H.1 2 BETA BASE SPS-3H W/COATINGAPS-4T.1.15 3 BETA BASE FA-2T APS-4T W/COATINGAPM-4T.1.15 3 BETA BASE FA-2T APM-4TAPM4.5T.1.15 3 BETA BASE FA-2T APM-4.5TSPM4.5T.1.15 3 BETA BASE PS-2H OR FS-2H SPM-4.5TSPM3.5H.1.15 3 BETA BASE PS-2H OR FS-2H SPM-3.5HSFM3.5H.1.15 3 BETA BASE PS-2H OR FS-2H SFM-3.5HSPM-4H.1.15 3 BETA BASE PS-2H OR FS-2H SPM-4HSPS-3H.1.20 3 BETA BASE SPS-3H SPS-3H GRAVELSPS-3H.1.20 3 NONE PS-2H OR FS-2H SPS-3H SPS-3H GRAVELAPS-4T.1.20 3 BETA BASE APS-4T APS-4T W/COATINGAPS-4T.1.20 3 NONE FA-2T APS-4T APS-4T W/COATINGAPM-4T.1.20 3 BETA BASE APS-4T APM-4TAPM-4T.1.20 3 NONE FA-2T APS-4T APM-4TAPM4.5T.1.20 3 BETA BASE APS-4T APM-4.5TAPM4.5T.1.20 3 NONE FA-2T APS-2T APM-4.5TSPM4.5T.1.20 3 BETA BASE SPS-3H SPM-4.5TSPM4.5T.1.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-4.5TSPM3.5H.1.20 3 BETA BASE SPS-3H SPM-3.5HSPM3.5H.1.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-3.5HSFM3.5H.1.20 3 BETA BASE SPS-3H SFM-3.5HSFM3.5H.1.20 3 NONE PS-2H OR FS-2H SPS-3H SFM-3.5HSPM-4H.1.20 3 BETA BASE SPS-3H SPM-4HSPM-4H.1.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-4HNEW / REPLACEMENTNAILABLEAPS-4T.2 2 BETA BASE APS-4TAPM-4T.2 2 BETA BASE APM-4TAPM-4.5T.2 2 BETA BASE APM-4.5TSPM-4.5T.2 2 BETA BASE SPM-4.5TSPM-3.5H.2 2 BETA BASE SPM-3.5HSFM-3.5H.2 2 BETA BASE SFM-3.5HSPM-4H.2 2 BETA BASE SPM-4HSPS-3H.2 2 BETA BASE SPS-3H W/COATINGAPS-4T.2.15 3 BETA BASE FA-2T APS-4T W/COATINGAPM-4T.2.15 3 BETA BASE FA-2T APM-4TAPM4.5T.2.15 3 BETA BASE FA-2T APM-4.5TSPM4.5T.2.15 3 BETA BASE PS-2H OR FS-2H SPM-4.5TSPM3.5H.2.15 3 BETA BASE PS-2H OR FS-2H SPM-3.5HSFM3.5H.2.15 3 BETA BASE PS-2H OR FS-2H SFM-3.5HSPM-4H.2.15 3 BETA BASE PS-2H OR FS-2H SPM-4HSPS-3H.2.20 3 BETA BASE SPS-3H SPS-3H GRAVELSPS-3H.2.20 3 NONE PS-2H OF FS-2H SPS-3H SPS-3H GRAVELAPS-4T.2.20 3 BETA BASE APS-4T APS-4T W/COATINGCOMPANY NAMEBITEC INC. (continued)185

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETNEW / REPLACEMENTNAILABLEAPS-4T.2.20 3 NONE FA-2T APS-4T APS-4TW/COATINGAPM-4T.2.20 3 BETA BASE APS-4T APM-4TAPM-4T.2.20 3 NONE FA-2T APS-4T APM-4TAPM4.5T.2.20 3 BETA BASE APS-4T APM-4.5TAPM4.5T.2.20 3 NONE FA-2T APS-4T APM-4.5TSPM4.5T.2.20 3 BETA BASE SPS-3H SPM-4.5TSPM4.5T.2.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-4.5TSPM3.5H.2.20 3 BETA BASE SPS-3H SPM-3.5HSPM3.5H.2.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-3.5HSFM3.5H.2.20 3 BETA BASE SPS-3H SFM-3.5HSFM3.5H.2.20 3 NONE PS-2H OR FS-2H SPS-3H SFM-3.5HSPM-4H.2.20 3 BETA BASE SPS-3H SPM-4HSPM-4H.2.20 3 NONE PS-2H OR FS-2H SPS-3H SPM-4HNEW / REPLACEMENT See New Replacement, Nailable and Non-nailableINSULATEDRECOVEREXISTING ROOFRECOVEREXISTING ROOFINSULATION ADDEDCOMPANY NAMESee New Replacement, Nailable and Non-nailableSee New Replacement, Nailable and Non-nailableCELOTEX CORP.NEW / REPLACEMENTNON-NAILABLESBS-4-C-M 4 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 2 TYPE VI PLY SHEETSSBS-3-C-M 3 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 1 TYPE VI PLY SHEETSSBS-2-C-M 2 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEETSBS-DP-4-C-M 4 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEET& 1 TYPE VI PLY SHEETSSBS-DP-3-C-M 3 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETSBS-DP-2-C-M 2 SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETAPP-4-C-M 4 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 2 TYPE VI PLY SHEETSAPP-4-C-S 4 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 2 TYPE VI PLY SHEETSAPP-3-C-M 3 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 1 TYPE VI PLY SHEETSAPP-3-C-S 3 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 1 TYPE VI PLY SHEETSAPP-2-C-M 2 D 4601 TYPE II BASE SHEET APP 4M CAP SHEETAPP-2-C-S 2 D 4601 TYPE II BASE SHEET APP 4S CAP SHEETNEW / REPLACEMENTNAILABLESBS-4-W-M 4 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 2 TYPE VI PLY SHEETSSBS-3-W-M 3 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 1 TYPE VI PLY SHEETSSBS-2-W-M 2 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEETSBS-DP-4-W-M 4 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEET& 1 TYPE VI PLY SHEETSSBS-DP-3-W-M 3 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETSBS-DP-2-W-M 2 SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETAPP-4-W-M 4 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 2 TYPE VI PLY SHEETSAPP-4-W-S 4 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 2 TYPE VI PLY SHEETSAPP-3-W-M 3 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 1 TYPE VI PLY SHEETSAPP-3-W-S 3 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 1 TYPE VI PLY SHEETSAPP-2-W-M 2 D 4601 TYPE II BASE SHEET APP 4M CAP SHEETAPP-2-W-S 2 D 4601 TYPE II BASE SHEET APP 4S CAP SHEETSBS-H+3-W-M 4 HYDRO-STOP VAP. BARRIER SBS 250 CAP SHEET& 2 TYPE VI PLY SHEETSSBS-H+2-W-M 3 HYDRO-STOP VAP. BARRIER SBS 250 CAP SHEET& 1 TYPE VI PLY SHEETSSBS-H+2-IV-W-M 3 HYDRO-STOP VAP. BARRIER SBS 250 CAP SHEET& 1 TYPE IV PLY SHEETSSBS-DP-H+3-W-M 4 HYDRO-STOP VAP. BARRIER SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEET& 1 TYPE VI PLY SHEETSSBS-DP-H+2-W-M 3 HYDRO-STOP VAP. BARRIER SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEET186

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETAPP-H+3-W-M 4 HYDRO-STOP VAP. BARRIER APP 4/M CAP SHEET& 2 TYPE VI PLY SHEETSAPP-H+3-W-S 3 HYDRO-STOP VAP. BARRIER APP 4/S CAP SHEET& 1 TYPE VI PLY SHEETSAPP-H+2-W-M 3 HYDRO-STOP VAP. BARRIER APP 4/M CAP SHEET& 1 TYPE VI PLY SHEETSAPP-H+2-W-S 3 HYDRO-STOP VAP. BARRIER APP 4/S CAP SHEET& 1 TYPE VI PLY SHEETSAPP-H+2-IV-W-M 3 HYDRO-STOP VAP. BARRIER APP 4/M CAP SHEET& 1 TYPE IV PLY SHEETSAPP-H+2-IV-W-S 3 HYDRO-STOP VAP. BARRIER APP 4/S CAP SHEET& 1 TYPE IV PLY SHEETSNEW / REPLACEMENTINSULATEDSBS-4-C-M 4 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 2 TYPE VI PLY SHEETSSBS-3-C-M 3 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEET& 1 TYPE VI PLY SHEETSSBS-2-C-M 2 D 4601 TYPE II BASE SHEET SBS 250 CAP SHEETSBS-DP-4-C-M 4 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEET& 1 TYPE VI PLY SHEETSSBS-DP-3-C-M 3 D 4601 TYPE II BASE SHEET SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETSBS-DP-2-C-M 2 SBS DUAL PLY FR BASE SHEET SBS DUAL PLY FR CAP SHEETAPP-4-C-M 4 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 2 TYPE VI PLY SHEETSAPP-4-C-S 4 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 2 TYPE VI PLY SHEETSAPP-3-C-M 3 D 4601 TYPE II BASE SHEET APP 4M CAP SHEET& 1 TYPE VI PLY SHEETSAPP-3-C-S 3 D 4601 TYPE II BASE SHEET APP 4S CAP SHEET& 1 TYPE VI PLY SHEETSAPP-2-C-M 2 D 4601 TYPE II BASE SHEET APP 4M CAP SHEETAPP-2-C-S 2 D 4601 TYPE II BASE SHEET APP 4S CAP SHEETRECOVEREXISTING ROOFINSULATION ADDEDSee New / Replacement InsulatedCompany NameNEW / REPLACEMENTCERTAINTEED ROOFING PRODUCTS GROUPNON-NAILABLESTA-C-B2 2 GLASBASE - FLINTLASTIC STASTA-C-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC STASTA-C-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC STAGTA-C-B2 2 GLASBASE - FLINTLASTIC GTA -GTA-C-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC GTAGTA-C-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTAGTAFR-C-B2 2 GLASBASE - FLINTLASTIC GTA-FR -GTAFR-C-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC GTA-FRGTAFR-C-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTA-FRGMS-C-B2 2 GLASBASE - FLINTLASTIC GMS -GMS-C-B3 3 - FLEXIGLAS BASE FLINTGLAS PLY IV FLINTLASTIC GMSGMS-C-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GMSFRP-C-B2 2 GLASBASE - FLINTLASTIC FR-P -FRP-C-B3 3 - FLEXIGLAS BASE FLINTLASTIC PLY IV FLINTLASTIC FR-PFRP-C-B4 4 - FLEXIGLAS BASE FLINTLASTIC PLY IV (2 PLIES) FLINTLASTIC FR-PGTS-C-B2 2 GLASBASE - FLINTLASTIC GTS -GTS-C-B3 3 - FLEXIGLAS BASE FLINTGLAS PLY IV FLINTLASTIC GTSGTS-C-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTSFRBC-C-B2 2 - FLEXIGLAS FR BASE FLINTLASTIC FR CAP -FRBC-C-B3 3 - FLEXIGLAS FR BASE FLEXIGLAS FR BASE FLINTLASTIC FR CAPFRBC-C-B4 4 - FLEXIGLAS FR BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC FR CAPNEW / REPLACEMENTNAILABLESTA-N-B2 2 GLASBASE - FLINTLASTIC STASTA-N-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC STASTA-N-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC STAGTA-N-B2 2 GLASBASE - FLINTLASTIC GTA -GTA-N-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC GTAGTA-N-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTACompany NameCERTAINTEED ROOFING PRODUCTS GROUP (continued)NEW / REPLACEMENTNAILABLE (contd)GTAFR-N-B2 2 GLASBASE - FLINTLASTIC GTA-FR -187

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETGTAFR-N-B3 3 - FLEXIGLAS BASE FLINTLASTIC STA FLINTLASTIC GTA-FRGTAFR-N-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTA-FRGMS-N-B2 2 GLASBASE - FLINTLASTIC GMS -GMS-N-B3 3 - FLEXIGLAS BASE FLINTGLAS PLY IV FLINTLASTIC GMSGMS-N-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GMSFRP-N-B2 2 GLASBASE - FLINTLASTIC FR-P -FRP-N-B3 3 - FLEXIGLAS BASE FLINTLASTIC PLY IV FLINTLASTIC FR-PFRP-N-B4 4 - FLEXIGLAS BASE FLINTLASTIC PLY IV (2 PLIES) FLINTLASTIC FR-PGTS-N-B2 2 GLASBASE - FLINTLASTIC GTS -GTS-N-B3 3 - FLEXIGLAS BASE FLINTGLAS PLY IV FLINTLASTIC GTSGTS-N-B4 4 - FLEXIGLAS BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC GTSFRBC-N-B3 3 GLASBASE - FLEXIGLAS FR BASE FLINTLASTIC FR CAPFRBC-N-B4 4 - FLEXIGLAS FR BASE FLINTGLAS PLY IV (2 PLIES) FLINTLASTIC FR CAPNEW / REPLACEMENT See description of the following specs under New / Replacement Nailable and Non-NailableINSULATEDSTA-N-B2/IN GMS-C-B2/ICSTA-N-B3/IN GMS-C-B3/ICSTA-N-B4/IN GMS-C-B4/ICSTA-C-B2/IC FRP-N-B2/INSTA-C-B3/IC FRP-N-B3/INSTA-C-B4/IC FRP-N-B4/INGTA-N-B2/IN FRP-C-B2/ICGTA-N-B3/IN FRP-C-B3/ICGTA-N-B4/IN FRP-C-B4/ICGTA-C-B2/IC GTS-N-B2/IN & (All New/Replacement Specs /IS)GTA-C-B3/IC GTS-N-B3/INGTA-C-B4/IC GTS-N-B4/INGTAFR-N-B2/IN GTS-C-B2/ICGTAFR-N-B3/IN GTS-C-B3/ICGTAFR-N-B4/IN GTS-C-B4/ICGTAFR-C-B2/IC FRBC-N-B3/INGTAFR-C-B3/IC FRBC-N-B4/INGTAFR-C-B4/IC FRBC-C-B2/INGMS-N-B2/IN FRBC-C-B3/INGMS-N-B3/IN FRBC-C-B4/INGMS-N-B4/INRECOVER See description of the following specs under New / Replacement Nailable and Non-NailableEXISTING ROOFSTA-N-B2/RN GMS-N-B2/RN FRBC-N-B3/RNSTA-N-B3/RN GMS-N-B3/RN FRBC-N-B4/RNSTA-N-B4/RN GMS-N-B4/RN FRBC-C-B2/RCSTA-C-B2/RC GMS-C-B2/RC FRBC-C-B3/RCSTA-C-B3/RC GMS-C-B3/RC FRBC-C-B4/RCSTA-C-B4/RC GMS-C-B4/RCGTA-N-B2/RN FRP-N-B2/RNGTA-N-B3/RN FRP-N-B3/RNGTA-N-B4/RN FRP-N-B4/RNGTA-C-B2/RC FRP-C-B2/RCGTA-C-B3/RC FRP-C-B3/RCGTA-C-B4/RC FRP-C-B4/RCGTAFR-N-B2/RN GTS-N-B2/RNGTAFR-N-B3/RN GTS-N-B3/RNGTAFR-N-B4/RN GTS-N-B4/RNGTAFR-C-B2/RC GTS-C-B2/RCGTAFR-C-B3/RC GTS-C-B3/RCGTAFR-C-B4/RC GTS-C-B4/RCRECOVEREXISTING ROOF(All New/Replacement Specs /R)INSULATION ADDED188

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETCompany NameDANOSA CARIBBEAN, INC.NEW / REPLACEMENTNON-NAILABLE1-RC 2 GLASDAN R-36 GLASDAN AL-80-33-RC 2 ESTERDAN R-36 ESTERDAN RM6-RC 1 GLASDAN AL-807-RC 1 ESTERDAN RM-58-RC 2 GLASDAN R-36 ESTERDAN RM9-RC 2 GLASDAN R-36 GLASDAN RM9-RC 2 BASEDAN IV GLASDAN RMNEW / REPLACEMENTNAILABLE1-LW 3 BASEDAN II ESTERDAN R-36 ESTERDAN RM3-LW 3 BASEDAN II GLASDAN R-36 ESTERDAN RM1-WP 3 BASEDAN II ESTERDAN R-35 ESTERDAN RM2-WP 2 BASEDAN II ESTERDAN RM-53-WP 3 BASEDAN II GLASDAN R-36 ESTERDAN RM5-ID (H/A) 3 BASEDAN II ESTERDAN RMNEW / REPLACEMENTINSULATED1-ID 3 BASEDAN II ESTERDAN R-35 ESTERDAN RM4-ID 3 BASEDAN II GLASDAN R-36 ESTERDAN RMRECOVEREXISTING ROOF1-ID 3 BASEDAN II ESTERDAN R-36 ESTERDAN RM4-ID 3 BASEDAN II GLASDAN R-36 ESTERDAN RMRECOVEREXISTING ROOFINSULATION ADDED1-ID 3 BASEDAN II ESTERDAN R-36 ESTERDAN RM4-ID 3 BASEDAN II GLASDAN R-36 ESTERDAN RMCompany NameDIBITENNEW / REPLACEMENTNON-NAILABLE403 1 NONE POLY/4453 1 NONE POLY/4.5 GRANULAR403-2 2 NONE POLY/4 POLY/4453-2 2 NONE POLY/4 POLY/4.5 GRANULAR503 2 NONE POLY/4NEW / REPLACEMENTNAILABLE401 2 APPROVED POLY/4451 2 APPROVED POLY/4.5 GRANULAR401-2 3 APPROVED POLY/4 POLY/4451-2 3 APPROVED POLY/4 POLY/4.5 GRANULAR501 2 APPROVED POLY/5NEW / REPLACEMENTINSULATED402 2 FIBERGLASS POLY/4152 2 FIBERGLASS POLY/4.5 GRANULAR404 2 FIBERGLASS POLY/4454 2 FIBERGLASS POLY/4.5 GRANULAR402-2 3 FIBERGLASS POLY/4 POLY/4452-2 3 FIBERGLASS POLY/4 POLY/4.5 GRANULAR404-2 3 FIBERGLASS POLY/4 POLY/4454-2 3 FIBERGLASS POLY/4 POLY/4.5 GRANULAR502 2 FIBERGLASS POLY/5504 2 FIBERGLASS POLY/5RECOVEREXISTING ROOFR 405 2 FIBERGLASS POLY/4R 455 2 FIBERGLASS POLY/4.5 GRANULARR 406 2 FIBERGLASS POLY/4R 456 2 FIBERGLASS POLY/4.5 GRANULARR 505 2 FIBERGLASS POLY/5R 506 2 FIBERGLASS POLY/5189

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.Company NameTOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETDIBITEN (continued)NAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETRECOVEREXISTING ROOFINSULATION ADDED402 2 FIBERGLASS POLYL/4452 2 FIBERGLASS POLY/4.5 GRANULAR404 2 FIBERGLASS POLY/4454 2 FIBERGLASS POLY/4.5 GRANULAR402-2 3 FIBERGLASS POLY/4 POLY/4452-2 3 FIBERGLASS POLY/4 POLY/4.5 GRANULAR404-2 3 FIBERGLASS POLY/4 POLY/4454-2 3 FIBERGLASS POLY/4 POLY/4.5 GRANULAR502 2 FIBERGLASS POLY/5504 2 FIBERGLASS POLY/5Company NameECOLOGY ROOF SYSTEMSNEW / REPLACEMENTNON-NAILABLE2000-2-CON-M 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500,600 OR 700 SERIES2000-2-CON-C 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500,600 OR 700 SERIES2000-2-CON-G 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500,600 OR 700 SERIES2000-3-CON-M 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-C0N-C 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-CON0G 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 S0 ANY ERS 500, 600 OR 700 SERIES2002-2-CON-M ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-CON- C ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-CON-G ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES3000-2-CON-M ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES3000-2-CON-C ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES3000-2-CON-G ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES3000-3-CON-M 3 ERS 401 ANY ERS 400, 500 SERIES ANY ERS 400, 500 SERIES3000-3-CON-C 3 ERS 401 ANY ERS 400, 500 SERIES ANY ERS 400, 500 SERIES3000-3-CON-G 3 ERS 401 ANY ERS 400, 500 SERIES ANY ERS 400, 500 SERIESNEW / REPLACEMENTNAILABLE2000-2-ND-M 2 ERS 401 ANY ERS 300 SERIES ANY ERS 500,600 OR 700 SERIES2000-2-ND-C 2 ERS 401 ANY ERS 300 SERIES ANY ERS 500, 600 0R 700 SERIES2000-2-ND-G 2 ERS 401 ANY ERS 300 SERIES ANY ERS 500, 600 OR 700 SERIES2000-2-ND-M 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2000-3-ND-C ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2000-3-ND-G ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600, OR 700 SERIES2002-2-ND-M ERS 401 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-ND-C ERS 401 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-ND-G 2 ANY ERS 500 SERIES ANY 505, 5072002-2-ND-M 3 ANY ERS 500 SERIES ANY ERS 600 SERIES3000-2-ND-C 3 ANY ERS 500 SERIES ANY ERS 600 SERIES3000-3-ND-G 3 ANY ERS 500 SERIES ANY ERS 600 SERIES3000-3-ND-M 3 ERS 400, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-ND-C 3 ERS 400, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-ND-G 3 ERS 400, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIESNEW / REPLACEMENTINSULATED2000-2-IN-M 2 ERS 400 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-2-IN-C 2 ERS 400 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-2-IN-G 2 ERS 400 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-IN-M 3 ERS 400 ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-IN-C 3 ERS 400 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-IN-G 3 ERS 400 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-IN-M ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-IN-C ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-IN-G ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES3000-2-IN-M ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES3000-2-IN-C ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES3000-2-IN-G ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES3000-3-IN-M 3 ERS 400, 400-6, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-IN-C 3 ERS 400, 400-6, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-IN-G 3 ERS 400, 400-6, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIESRECOVEREXISTING ROOF190

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETRECOVEREXISTING ROOFINSULATION ADDED2000-2-IN-M 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2000-2-IN-C 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2000-2-IN-G 2 ERS 401 ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2000-3-IN-M 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-IN-C 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2000-3-IN-G 3 ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES2002-2-IN-M ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2002-2-IN-C ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES2002-2=IN-G ANY ERS 500 SERIES ANY ERS 500, 600 0R 700 SERIES3000-2-IN-M ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES ANY ERS 500, 600 OR 700 SERIES300O-2-IN-C ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES3000-2-IN-G ERS 401 ANY ERS 500 SERIES ANY ERS 500 SERIES3000-3-IN-M 3 ERS 4OO, 400-6 , 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-IN-C 3 ERS 400, 400-6, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIES3000-3-IN-G 3 ERS 400, 400-6, 401 ANY ERS 500, 600 SERIES ANY ERS 500, 600 SERIES ANY ERS 600, 700 SERIESCompany NameFIRESTONE BUILDING PRODUCTSNEW / REPLACEMENTNON-NAILABLEC-PM-16-C 2 MB BASE SHEET APP160C-PM-17-C 2 MB BASE SHEET APP170C-PM-18-M 2 MB BASE SHEET APP180C-PM-18FR-M 2 MB BASE SHEET APP180FRC-PM16-18-M 3 MB BASE SHEET APP160 APP180C-PM16-18FR-M 3 MB BASE SHEET APP160 APP180FRC-PM-30-M 2 MB BASE SHEET SBSC-PM-31-M 2 MB BASE SHEET SBS FRC-PM-32-G 2 MB BASE SHEET SBS SMOOTH FLOOD COATC-PM-33-M 2 MB BASE SHEET SBS PREMIUMC-PS-36-M 2 MB BASE SHEET SBS PREMIUM FRC-PS-40-M 2 MB BASE SHEET SBS TORCHC-PS-34-M 2 - SBS BASE SHEET SBS GLASSC-PS-35-M 2 - SBS BASE SHEET SBS GLASS FRC-PX-34-M 2 - SBS PREMIUM BASE SHEET SBS GLASSC-PX-35-M 2 - SBS PREMIUM BASE SHEET SBS GLASS FRC-P32-33-M 2 - SBS SMOOTH SBS PREMIUMC-P32-36-M 2 - SBS SMOOTH SBS PREMIUM FRL-M-16-C 2 MB BASE SHEET APP160L-M-17-C 2 MB BASE SHEET APP170L-M-18-M 2 MB BASE SHEET APP180L-M-18FR-M 2 MB BASE SHEET APP180FRL-M16-18-M 3 MB BASE SHEET APP160 APP180L-M16-18FR-M 3 MB BASE SHEET APP160 APP180FRL-M30-M 2 MB BASE SHEET SBSL-M31-M 2 MB BASE SHEET SBS FRL-M32-G 2 MB BASE SHEET SBS SMOOTHL-M33-M 2 MB BASE SHEET SBS PREMIUML-M36-M 2 MB BASE SHEET SBS PREMIUM FRL-MS-34-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASSL-MS-35-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASS FRL-MX-34-M 3 MB BASE SHEET SBS PREMIUM BASE SHEET SBS GLASSL-MX-35-M 3 MB BASE SHEET SBS PREMIUM BASE SHEET SBS GLASS FRL-M32-33-M 3 MB BASE SHEET SBS SMOOTH SBS PREMIUML-M32-36-M 3 MB BASE SHEET SBS SMOOTH SBS PREMIUM FRC-P-46-42-M 2 - SBS GLASS TORCH BASE SBS GLASS FR TORCHC-P-46-41-M 2 - SBS GLASS TORCH BASE SBS FR TORCHC-P-45-42-M 2 - SBS POLY TORCH BASE SBS GLASS FR TORCHC-P-45-41-M - SBS POLY TORCH BASE SBS FR TORCHNEW / REPLACEMENTNAILABLEW-M16-C 2 MB BASE SHEET APP160W-M17-C 2 MB BASE SHEET APP170W-M-18-M 2 MB BASE SHEET APP180W-M-18FR-M 2 MB BASE SHEET APP180FRW-M16-18-M 3 MB BASE SHEET APP160 APP180W-M16-18FR-M 3 MB BASE SHEET APP160 APP180FRW-M30-M 2 MB BASE SHEET SBSW-M31-M 2 MB BASE SHEET SBS FRW-M32-G 2 MB BASE SHEET SBS SMOOTH FL00D COATW-M33-M 2 MB BASE SHEET SBS PREMIUMW-M36-M 2 MB BASE SHEET SBS PREMIUM FRW-M40-M 2 MB BASE SHEET SBS TORCH191

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.Company NameTOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETFIRESTONE BUILDING PRODUCTS (continued)NAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETW-MS34-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASSW-MS35-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASS FRW-MX34-M 3 MB BASE SHEET SBS PREMIUM BASE SHEET SBS GLASSW-MX35-M 3 MB BASE SHEET SBS PREMIUM BASE SHEET SBS GLASS FRW-M32-33-M 3 MB BASE SHEET SBS SMOOTH SBS PREMIUMW-M32-36-M 3 MB BASE SHEET SBS SMOOTH SBS PREMIUM FRW-M-46-42-M 2 MB BASE SHEET SBS GLASS TORCH BASE SBS GLASS FR TORCHW-M-46-41-M 2 MB BASE SHEET SBS GLASS TORCH BASE SBS FR TORCHW-M-45-42-M 2 MB BASE SHEET SBS POLY TORCH BASE SBS GLASS FR TORCHW-M-45-41-M 2 MB BASE SHEET SBS POLY TORCH BASEQ SBS FR TORCHNEW / REPLACEMENTINSULATEDI-M16-C 2 MB BASE SHEET APP160I-M17-C 2 MB BASE SHEET APP170I-M18-M 2 MB BASE SHEET APP180I-M18FR-M 2 MB BASE SHEET APP180 FRI-M16-18-M 3 MB BASE SHEET APP160 APP180I-M16-18FR-M 3 MB BASE SHEET APP160 APP180 FRI-M30-M 2 MB BASE SHEET SBSI-M31-M 2 MB BASE SHEET SBS FRI-M32-G 2 MB BASE SHEET SBS SMOOTHI-M33-M 2 MB BASE SHEET SBS PREMIUMI-M36-M 2 MB BASE SHEET SBS PREMIUM FR SBSI-M41-M 2 MB BASE SHEET SBS TORCHI-S34-M 2 SBS BASE SHEET SBS SMOOTHI-S35-M 2 SBS BASE SHEET SBS PREMIUMI-X34-M 2 SBS PREMIUM BASE SHEET SBS PREMIUM FRI-X35-M 2 SBS PREMIUM BASE SHEETI-3233-M 2 SBS SMOOTH SBS GLASSI-3236-M 2 SBS SMOOTH SBS GLASS FRI-46-42-M 2 SBS GLASS TORCH BASE SBS GLASS FR TORCHI-46-41-M 2 SBS GLASS TORCH BASE SBS FR TORCHI-45-42-M 2 SBS POLY TORCH BASE SBS GLASS FR TORCHI-45-41-M 2 SBS POLY TORCH BASE SBS FR TORCHRECOVEREXISTING ROOFE-M16-C 2 MB BASE SHEET APP160E-M17-C 2 MB BASE SHEET APP170E-M18-M 2 MB BASE SHEET APP180E-M18FR-M 2 MB BASE SHEET APP180 FRE-M30-M 2 MB BASE SHEET SBSE-M31-M 2 MB BASE SHEET SBS FRE-M32-G 2 MB BASE SHEET SBS SMOOTHE-M33-M 2 MB BASE SHEET SBS PREMIUME-M36-M 2 MB BASE SHEET SBS PREMIUM FRE-M40-M 2 MB BASE SHEET SBS TORCHE-MS-34-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASSE-MS-35-M 3 MB BASE SHEET SBS BASE SHEET SBS GLASS FRRECOVEREXISTING ROOFINSULATION ADDEDI-M16-C 2 MB BASE SHEET APP160I-M17-C 2 MB BASE SHEET APP170I-M18-M 2 MB BASE SHEET APP180I-M18FR-M 2 MB BASE SHEET APP180 FRI-M30-M 2 MB BASE SHEET SBSI-M31-M 2 MB BASE SHEET SBS FRI-M32-G 2 MB BASE SHEET SBS SMOOTHI-M33-M 2 MB BASE SHEET SBS PREMIUMI-M36-M 2 MB BASE SHEET SBS PREMIUM FRI-M40-M 2 MB BASE SHEET SBS TORCHI-S34-M 2 MB BASE SHEET SBS GLASSI-S35-M 2 MB BASE SHEET SBS GLASS FRCOMPANYGAF MATERIALS CORPORATIONNEW / REPLACEMENTNON-NAILABLENN-0-1-TS 1 NONE RUBEROID TORCH (SMOOTH)NN-1-1-TG 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (GRANULE)NN-1-1-MG 2 GAFGLAS 75 BASE SHEET RUBEROID MOP (GRANULE)NN-1-1-MGFR 2 GAFGLAS 75 BASE SHEET RUBEROID 170 FRNN-1-1-MSG 2 GAFGLAS 75 BASE SHEET RUBEROID MOP SMOOTH (GRAVEL)NEW / REPLACEMENTNON-NAILABLE (contd)192

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETNN-1-1-TS 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (SMOOTH)NN-01-TG 1 NONE RUBEROID TORCH GRANULENN-01-TSC 1 NONE RUBEROID TORCHNN-1-1-TSC 2 GAFGLAS 75 BASE SHEET RUBEROID TORCHNN-1-2-20/30 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30NN-1-2-20/30 FR 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30 FRNEW / REPLACEMENTNAILABLEN-1-1-TG 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (GRANULE)N-1-1-MG 2 GAFGLAS 75 BASE SHEET RUBEROID MOP (GRANULE)N-1-1-TS 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (SMOOTH)N-1-1-TSC 2 GAFGLAS 75 BASE SHEET RUBERIOD TORCH (SMOOTH)N-1-1-M170FR 2 GAFGLAS 75 BASE SHEET RUBEROID MOP 170 FRN-1-1-MG 3 GAFGLAS 75 BASE SHEET RUBERIOD MOP (GRANULE)N-1-2-MGP 3 GAFGLAS 75 BASE SHEET RUBEROID MOP (SMOOTH) RUBEROID MOP PLUSN-1-2-MGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID MOP (SMOOTH) RUBEROID MOP FRN-1-2-TGP 3 STRATAVENT RUBEROID TORCH SMOOTH RUBEROID TORCH PLUSN-1-2-TGPFR 3 STRATAVENT RUBEROID TORCH SMOOTH RUBEROID TORCH FRN-2-1-MGP 3 GAFGLAS 75 BASE SHEET RUBEROID MOP PLUSAND 1 PLY 4 OR PLY 6N-2-1-MGPFR 3 GAFGLAS STRATAVENT RUBEROID MOP FRAND 1 PLY 4 OR PLY 6N-2-1-TGP 3 GAFGLAS STRATAVENT RUBEROID TORCH PLUSAND GAFGLAS PLY 6N-2-1-TGPFR 3 GAFGLAS STRATAVENT RUBEROID TORCH FRAND GAFGLAS PLY 6N-2-(20/P6)-1-M6P 3 GAFGLAS PLY 6 RUBEROID 20 RUBEROID MOP PLUSN-2-(20/P6)-1-M6PFR 3 GAFGLAS PLY 6 RUBEROID 20 RUBEROID MOP FRN-3-1-MGP 4 GAFGLAS STRATAVENT RUBEROID MOP PLUSAND 2 PLY 4 OR PLY 6N-3-1-MGPFR 4 GAFGLAS STRATAVENT RUBEROID MOP FRAND 2 PLY 4 OR PLY 6N-3-1-TGP 4 GAFGLAS STRATAVENT RUBEROID TORCH PLUSAND 2 GAFGLAS PLY 6N-3-1-TGPFR 4 GAFGLAS STRATAVENT RUBEROID TORCH FRAND 2 GAFGLAS PLY 6N-1-2-20/30 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30OR 1 PLY 4 OR PLY 6N-1-2-20/30 FR 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30 FROR 1 PLY 4 OR PLY 6N-1-2-20/MG 3 GAFGLAS STRATAVENT RUBEROID 20 RUBEROID MOP (GRANULE)BASE SHEETN-1-2-20/MGP 3 GAFGLAS STRATAVENT RUBEROID 20 RUBEROID MOP PLUSBASE SHEETN-1-2-20/MGPFR 3 GAFGLAS STRATAVENT RUBEROID 20 RUBEROID MOP FRBASE SHEETNEW / REPLACEMENTINSULATEDI-1-1-TG 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (GRANULE)I-2-1-TG 3 2 GAFGLAS PLY 4 OR 6 RUBEROID TORCH (GRANULE)I-1-2-TGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID TORCH RUBEROID TORCH FRI-2-1-TGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID TORCH FRAND 1 PLY 4 OR PLY 6I-2-1-MGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID MOP FRAND 1 PLY 4 OR PLY 6I-0-2-20-MGPFR 2 NONE RUBEROID 20 (SMOOTH) RUBERIOD MOP FRI-3-1-TGPFR 4 3 GAFGLAS PLY 4 OR 6 RUBEROID TORCH FRI-3-1-MGPFR 4 3 GAFGLAS PLY 4 OR 6 RUBEROID MOP FRI-1-2-20-MGP 3 GAFGLAS 75 BASE SHEET RUBEROID MOP 20 RUBEROID MOP PLUSI-1-2-MGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID MOP (SMOOTH) RUBEROID MOP FRI-1-1-TSC 2 GAFGLAS 75 BASE SHEET RUBEROID TORCH (SMOOTH)I-2-1-TGP 3 2 GAFGLAS PLY 6 RUBEROID TORCH PLUSI-1-2-TGP 3 GAFGLAS 75 BASE SHEET RUBEROID TORCH PLUSI-0-2-MGP 2 NONE RUBEROID MOP 20 RUBEROID MOP PLUSI-1-2-20/30 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30I-1-2-20/30 FR 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID 30 FRI-0-2-20/30 2 NONE RUBEROID 20 RUBEROID 30I-0-2-20/30 FR 2 NONE RUBEROID 20 RUBEROID 30 FRI-1-2-20/MG 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID MOP (GRANULE)I-1-2-20/MGP 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID MOP PLUSI-1-2-20/MGPFR 3 GAFGLAS 75 BASE SHEET RUBEROID 20 RUBEROID MOP FRI-1-1-MGFR 2 GAFGLAS BASE SHEET RUBEROID MOP 170FRI-1-1-MGP 2 GAFGLAS BASE SHEET RUBEROID MOP PLUSI-2-1-MG 3 GAFGLAS PLY 4 OR 6 RUBEROID MOP (GRANULE)I-2-1-MGFR 3 GAFGLAS PLY 4 OR 6 RUBEROID MOP 170FRCOMPANYNEW / REPLACEMENTGAF MATERIALS CORPORATION (continued)193

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETINSULATED (contd)I-O-2-20/MG 2 NONE RUBEROID 20 RUBEROID MOP (GRANULE)I-O-2-20/MGP 2 NONE RUBEROID 20 RUBEROID MOP PLUSI-O-2-20/MGFR 2 NONE RUBEROID 20 RUBEROID MOP FRRECOVEREXISTING ROOFR-1-1-TG 2 GAFGLAS 75 BASE SHEET RUBEROID TORCHR-1-1-MG 2 GAFGLAS 75 BASE SHEET RUBEROID MOPR-1-1-MSG 2 GAFGLAS STRATAVENT RUBEROID MOP SMOOTH (GRAVEL)R-1-1-TS 2 GAFGLAS 75 BASE SHEET RUBEROID TORCHR11M6FR 2 GAFGLAS STRATAVENT RUBEROID MOP 170FRR-0-1-TG 1 NONE RUBEROID TORCHR-0-1-TS 1 NONE RUBEROID TORCHR-1-1-TSC 2 GAFGLAS 75 BASE SHEET RUBEROID TORCHCompany NameICA, INC.NEW / REPLACEMENTNON-NAILABLEPS1-NN 1 NONE ICA PREMIUM APP SMOOTHPS2-NN 2 NONE ICA PREMIUM APP SMOOTH ICA PREMIUM APP SMOOTHPM1-NN 1 NONE ICA PREMIUM APP MINERAL OR SLATE -PM2-NN 2 NONE ICA PREMIUM APP SMOOTH ICA PREMIUM APP MINERAL OR SLATENEW / REPLACEMENTNAILABLEPS1-N 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTHPS2-N 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP SMOOTHPM1-N 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP MINERAL OR SLATE -PM2-N 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP MINERAL OR SLATENEW / REPLACEMENTINSULATEDPS1-NI 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTHPS2-NI 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP SMOOTHPM1-NI 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP MINERAL -PM2-NI 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP MINERAL OR SLATEPS1-NNI 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH -PS2-NNI 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP SMOOTHPM1-NNI 1 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP MINERAL -PM2-NNI 2 ICA FIBERGLASS 62 BASE SHEET ICA PREMIUM APP SMOOTH ICA PREMIUM APP MINERAL OR SLATERECOVER See New / Replacement: Nailable and Non-nailableEXISTING ROOFRECOVEREXISTING ROOF See New / Replacement InsulatedINSULATION ADDEDCompany NameIKO INDUSTRIES INC.NEW / REPLACEMENTNON-NAILABLEIKO #5 2 IKO GLASS BASE IKO ARMOURPLASTOR IKO ORGANIC BASEOR IKO MODIFLEXOR IKO TORCHFLEXNEW / REPLACEMENTNAILABLE OR IKO ORGANIC BASE OR IKO MODIFLEXNEW / REPLACEMENTINSULATEDIKO #4 2 IKO GLASS BASE IKO ARMOURPLASTOR IKO ORGANIC BASEOR IKO MODIFLEXOR IKO TORCHFLEXRECOVEREXISTING ROOFIKO #1 2 IKO GLASS BASE IKO ARMOURPLASTOR IKO ORGANIC BASEOR IKO MODIFLEXOR IKO TORCHFLEX194

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETRECOVEREXISTING ROOFINSULATED ADDEDIKO #2 2 IKO GLASS BASE IKO ARMOURPLASTOR IKO ORGANIC BASEOR IKO MODIFLEXOR IKO TORCHFLEXCompany NameJOHNS MANVILLE INTERNATIONAL, INC.NEW / REPLACEMENTNON-NAILABLE2CID 2 GLASPLY PREMIER DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CID 2 GLASBASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CID 2 NONE DYNABASE DYNAKAP, DYNAKAP FR,DYNAPLY, DYNALASTIC 180S DYNAMAX, OR DYNAMAX FR2CID-C 2 GLASBASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CID-C 2 NONE DYNABASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CIG 2 GLASPLY PREMIER OR DYNAPLY OR DYNAKAPGLASBASE2CIG 2 NONE DYNABASE DYNAPLY OR DYNAKAP2FID 2 GLASPLY IV OR GLASBASE DYNAGLAS OR DYNAGLAS FR2FID 2 NONE DYNABASE DYNAGLAS, DYNAGLAS 30FR,DYNALASTIC 180S DYNAPLYOR DYNAGLAS FR2FID-C 2 NONE DYNABASE DYNAGLAS, DYNAGLAS 30FR,OR DYNAGLAS FR2PID 2 GLASPLY PREMIER DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR2PID 2 PP 28 GLASBASE DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR2PID 2 NONE DYNALASTIC 180S DYNALASTIC 180, DYNALASTIC 180 FR,DYNABASE, DYNAPLY DYNALASTIC 250, OR DYNALASTIC 250 FR3CID 3 TWO GLASPLY PREMIER DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR3CID-C 3 TWO GLASPLY PREMIER DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR3FID 3 TWO GLASPLY PREMIER DYNAGLAS OR DYNAGLAS FR3FID-C 3 TWO GLASPLY PREMIER DYNAGLAS OR DYNAGLAS FR3PID 3 TWO GLASPLY PREMIER DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR3PID-C 3 TWO GLASPLY PREMIER DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR2CBS-W/2PBS-W 2 GLASBASE, PP28 TRICOR, BICOR,OR APPEX SERIES2CBN-W/2PBN-W 2 GLASBASE, PP28 TRICOR M, TRICOR M FR,OR APPEX SERIES3CBS-W/3PBS-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE TRICOR, BICOR,OR APPEX SERIES3CBN-W/3PBN-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE TRICOR M, TRICOR M FROR APPEX SERIES2F1O 2 DYNAWELD BASE DYNAWELD CAP FR3F10 (HW) 3 DYNAWELD BASE DYNAWELD BASE DYNAWELD CAP FR3F10 (A1T) HW 3 TWO GLASS PLY DYNAWELD CAP FR4F10 (HW) A1T 4 THREE GLASS PLY DYNAWELD CAP FRPREMIER IVNEW / REPLACEMENTNAILABLE2CND 2 VENTSULATION OR DYNAKAP, DYNAKAP FR,PP 28GLASBASEDYNAMAX, OR DYNAMAX FR2CND 2 NONE DYNABASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CND-C 2 VENTSULATION OR DYNAKAP, DYNAKAP FR,PP 28 GLASBASE DYNAMAX, OR DYNAMAX FR2CND-C 2 NONE DYNABASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2CNG 2 VENTSULATION OR DYNAKAP, DYNAKAP FR,PP 28 GLASBASE DYNAMAX, OR DYNAMAX FR2CNG 2 NONE DYNABASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR2FND 2 VENTSULATION OR DYNAGLAS OR DYNAGLAS FRPP 28 GLASBASE2FND 2 NONE DYNABASE DYNAGLAS, DYNAGLAS 30FR,OR DYNAGLAS FR195

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.Company NameTOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETJOHNS MANVILLE INTERNATIONAL, INC. (continued)2FND-C 2 VENTSULATION OR DYNAGLAS OR DYNAGLAS FRPP 28 GLASBASE2PND 2 VENTSULATION OR DYNALASTIC 180, DYNALASTIC 180 FR,PP 28 GLASBASE DYNALASTIC 250, OR DYNALASTIC 250 FR2PND 2 NONE DYNALASTIC 180S DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR2PND-C 2 VENTSULATION OR DYNALASTIC 180, DYNALASTIC 180 FR,PP 28 GLASBASE DYNALASTIC 250, OR DYNALASTIC 250 FR3CND 3 VENTSULATION OR DYNAKAP, DYNAKAP FR,PP 28 GLASBASE DYNAMAX, OR DYNAMAX FR3CLD 3 VENTSULATION DYNABASE DYNAKAP, DYNAKAP FR,DYNAMAX, OR DYNAMAX FR3FND 3 VENTSULATION OR DYNAGLAS OR DYNAGLAS FRPP 28 GLASBASE3FLD 3 VENTSULATION DYNABASE DYNAGLAS, DYNAGLAS 30 FR,OR DYNAGLAS FR3PND 3 VENTSULATION OR DYNALASTIC 180, DYNALASTIC 180 FR,3PLD 3 VENTSULATION DYNALASTIC 180S DYNALASTIC 180, DYNALASTIC 180 FR,DYNALASTIC 250, OR DYNALASTIC 250 FR2CNS-W/2PNS-W 2 GLASBASE, PP28 TRICOR, BICOR,OR APPEX SERIES2CNS-W/2PNS-W 2 NONE JOHNS MANVILLE APP BASE TRICOR, BICOR,OR APPEX SERIES2CNN-W/2PNN-W 2 GLASBASE, PP28 CLASSIC SERIES, TRICOR M,TRICOR M FR, OR APPEX SERIES2CNN-W/2PNN-W 2 NONE JOHNS MANVILLE APP BASE TRICOR M, TRICOR M FROR APPEX SERIES3CNS-W/3PNS-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE TRICOR, BICOR,OR APPEX SERIES3CNS-W/3PNS-W 3 NONE JOHNS MANVILLE APP BASE APPEX SERIES TRICOR, BICOROR APPEX SERIES3CNN-W/3PNN-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE CLASSIC SERIES, TRICOR M,TRICOR M FR, OR APPEX SERIES3CNN-W/3PNN-W 3 NONE JOHNS MANVILLE APP BASE APPEX SERIES TRICOR M, TRICOR MFR,OR APPEX SERIES3FLD (HW) 3 PP28, GLASBASE, DYNAWELD BASE DYNAWELD CAP FROR VENTSULATIONNEW / REPLACEMENTINSULATED1CIN-W/1PIS-W 1 NONE TRICOR, BICOR,OR APPEX SERIES1CIN-W/1PIN-W 1 NONE TRICOR M, TRICOR M FR,OR APPEX SERIES2CIS-W/2PIS-W 2 GLASBASE, PP28 TRICOR, BICOR,OR APPEX SERIES2CIS-W/2PIS-W 2 NONE JOHNS MANVILLE APP BASE TRICOR M, TRICOR M FROR APPEX SERIES2CIN-W/2PIN-W 2 GLASBASE, PP28 TRICOR M, TRICOR M FR,OR APPEX SERIES2CIN-W/2PIN-W 2 NONE JOHNS MANVILLE APP BASE TRICOR M, TRICOR M FROR APPEX SERIES3CIS-W/3PIS-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE TRICOR, BICOR,OR APPEX SERIES3CIS-W/3PIS-W 3 NONE JOHNS MANVILLE APP BASE APPEX SERIES TRICOR, BICORAPPEX SERIES3CIN-W/3PIN-W 3 GLASBASE, PP28 JOHNS MANVILLE APP BASE TRICOR M, TRICOR M FROR APPEX SERIES3CIN-W/3PIN-W 3 NONE JOHNS MANVILLE APP BASE APPEX SERIES TRICOR M, TRICOR MFR,OR APPEX SERIESRECOVEREXISTING ROOF See New / Replacement, Non-nailable and InsulatedINSULATION ADDEDCompany NameNEW / REPLACEMENTMALARKEY ROOFING COMPANYNON-NAILABLEM2-CXB 2 #602 ARCTIC SHIELD #601 PREMIUM MINERALM2-DXB 2 #603 SUPERBASE #601 PREMIUM MINERALM2-EXB 2 #605 PANOPLY #601 PREMIUM MINERALM3-BHB 3 #501 PREMIUM I #500 PREMIUM #601 PREMIUM MINERALM3-BIB 3 #501 PREMIUM I #506 SUPER 6 #601 PREMIUM MINERALM3-BBB 3 #501 PREMIUM I #501 PREMIUM I #601 PREMIUM MINERALM3-BCB 3 #501 PREMIUM I #602 ARCTIC SHIELD #601 PREMIUM MINERALM3-BDB 3 #501 PREMIUM I #603 SUPER BASE #601 PREMIUM MINERAL196

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETM3-EHB 3 #605 PANOPLY #500 PREMIUM #601 PREMIUM MINERALM3-EIB 3 #605 PANOPLY #506 SUPER 6 #601 PREMIUM MINERALM3-EBB 3 #605 PANOPLY #501 PREMIUM I #601 PREMIUM MINERALM3-EEB 3 #605 PANOPLY #605 PANOPLY #601 PREMIUM MINERALM3-FHB 3 #1000 ESHAVENT #500 PREMIUM #601 PREMIUM 1 MINERALM3-FIB 3 #1000 ESHAVENT #506 SUPER 6 #601 PREMIUM 1 MINERALM3-FBB 3 #1000 ESHAVENT #501 PREMIUM I #601 PREMIUM 1 MINERALM3-FEB 3 #1000 ESHAVENT #605 PANOPLY #601 PREMIUM 1 MINERALM4-BHB 4 #501 PREMIUM I #500 PREMIUM #601 PREMIUM 1 MINERALM4-BIB 4 #501 PREMIUM I #506 SUPER 6 #601 PREMIUM 1 MINERALM4-BBB 4 #501 PREMIUM I #501 PREMIUM I #601 PREMIUM 1 MINERALM4-EBB 4 #605 PANOPLY #501 PREMIUM I #601 PREMIUM 1 MINERALM4-EHB 4 #1000 ESHAVENT #500 PREMIUM #601 PREMIUM 1 MINERALM4-FIB 4 #1000 ESHAVENT #506 SUPER 6 #601 PREMIUM 1 MINERALM4-FBB 4 #1000 ESHAVENT #501 PREMIUM I #601 PREMIUM 1 MINERALM4-FEB 4 #1000 ESHAVENT #605 PANOPLY #601 PREMIUM 1 MINERALM5-EIB 5 #501 PREMIUM I #506 SUPER 6 #601 PREMIUM 1 MINERALM5-EHB 5 #605 PANOPLY #500 PREMIUM #601 PREMIUM 1 MINERALM5-BIB 5 #605 PANOPLY #506 SUPER 6 #601 PREMIUM 1 MINERALM2-CXC 2 #602 ARCTIC SHIELD #625 PARAGON MINERALM2-DXC 2 #603 SUPERBASE #625 PARAGON MINERALM2-EXC 2 #605 PANOPLY #625 PARAGON MINERALM3-BHC 3 #501 PREMIUM I #500 PREMIUM #625 PARAGON MINERALM3-BIC 3 #501 PREMIUM I #506 SUPER 6 #625 PARAGON MINERALM3-BBC 3 #501 PREMIUM I #501 PREMIUM I #625 PARAGON MINERALM3-EHC 3 #605 PANOPLY #500 PREMIUM #625 PARAGON MINERALM3-EIC 3 #605 PANOPLY #506 SUPER 6 #625 PARAGON MINERALM3-EBC 3 #605 PANOPLY #501 PREMIUM I #625 PARAGON MINERALM3-EEC 3 #605 PANOPLY #605 PANOPLY #625 PARAGON MINERALM3-FHC 3 #1000 ESHAVENT #500 PREMIUM #625 PARAGON MINERALM3-FIC 3 #1000 ESHAVENT #506 SUPER 6 #625 PARAGON MINERALM3-FBC 3 #1000 ESHAVENT #501 PREMIUM I #625 PARAGON MINERALM3-FCC 3 #1000 ESHAVENT #602 ARCTIC SHIELD #625 PARAGON MINERALM3-FDC 3 #1000 ESHAVENT #603 SUPERBASE #625 PARAGON MINERALM3-FEC 3 #1000 ESHAVENT #605 PANOPLY #625 PARAGON MINERALM4-BHC 4 #501 PREMIUM I #500 PREMIUM #625 PARAGON MINERALM4-BIC 4 #501 PREMIUM I #506 SUPER 6 #625 PARAGON MINERALM4-BBC 4 #501 PREMIUM I #501 PREMIUM I #625 PARAGON MINERALM4-EHC 4 #605 PANOPLY #500 PREMIUM #625 PARAGON MINERALM4-EIC 4 #605 PANOPLY #506 SUPER 6 #625 PARAGON MINERALM4-EBC 4 #605 PANOPLY #501 PREMIUM I #625 PARAGON MINERALM4-FHC 4 #1000 ESHAVENT #500 PREMIUM #625 PARAGON MINERALM4-FIC 4 #1000 ESHAVENT #506 SUPER 6 #625 PARAGON MINERALM4-FBC 4 #1000 ESHAVENT #501 PREMIUM I #625 PARAGON MINERALM4-FEC 4 #1000 ESHAVENT #605 PANOPLY #625 PARAGON MINERALM5-BHC 5 #501 PREMIUM I #500 PREMIUM #625 PARAGON MINERALM5-BIC 5 #501 PREMIUM I #506 SUPER 6 #625 PARAGON MINERALM5-BBC 5 #501 PREMIUM I #501 PREMIUM I #625 PARAGON MINERALM5-EBC 5 #605 PANOPLY #501 PREMIUM I #625 PARAGON MINERALM5-FHC 5 #1000 ESHAVENT #500 PREMIUM #625 PARAGON MINERALM5-FIC 5 #1000 ESHAVENT #506 SUPER 6 #625 PARAGON MINERALM5-FBC 5 #1000 ESHAVENT #501 PREMIUM I #625 PARAGON MINERALM2-CXD 2 #602 ARCTIC SHIELD #650 PANOPLY MINERALM2-DXD 2 #603 SUPERBASE #650 PANOPLY MINERALM2-EXD 2 #605 PANOPLY #650 PANOPLY MINERALM3-BHD 3 #501 PREMIUM I #500 PREMIUM #650 PANOPLY MINERALM3-BID 3 #501 PREMIUM I #506 SUPER 6 #650 PANOPLY MINERALM3-BBD 3 #501 PREMIUM I #501 PREMIUM I #650 PANOPLY MINERALM3-EHD 3 #605 PANOPLY #500 PREMIUM #650 PANOPLY MINERALM3-EID 3 #605 PANOPLY #506 SUPER 6 #650 PANOPLY MINERALM3-EBD 3 #605 PANOPLY #501 PREMIUM I #650 PANOPLY MINERALM3-EED 3 #605 PANOPLY #605 PANOPLY #650 PANOPLY MINERALM3-FHD 3 #1000 ESHAVENT #500 PREMIUM #650 PANOPLY MINERALM3-FID 3 #1000 ESHAVENT #506 SUPER 6 #650 PANOPLY MINERALM3-FBD 3 #1000 ESHAVENT #501 PREMIUM I #650 PANOPLY MINERALM3-FED 3 #1000 ESHAVENT #605 PANOPLY #650 PANOPLY MINERALM4-BHD 4 #501 PREMIUM I #500 PREMIUM #650 PANOPLY MINERALM4-BID 4 #501 PREMIUM I #506 SUPER 6 #650 PANOPLY MINERALM4-BBD 4 #501 PREMIUM I #501 PREMIUM I #650 PANOPLY MINERALM4-EHD 4 #605 PANOPLY #500 PREMIUM #650 PANOPLY MINERALM4-EID 4 #605 PANOPLY #506 SUPER 6 #650 PANOPLY MINERALM4-EBD 4 #605 PANOPLY #501 PREMIUM I #650 PANOPLY MINERALM4-FHD 4 #1000 ESHAVENT #500 PREMIUM #650 PANOPLY MINERALM4-FID 4 #1000 ESHAVENT #506 SUPER 6 #650 PANOPLY MINERALM4-FBD 4 #1000 ESHAVENT #501 PREMIUM I #650 PANOPLY MINERALM4-FED 4 #1000 ESHAVENT #605 PANOPLY #650 PANOPLY MINERALM5-EHD 5 #605 PANOPLY #500 PREMIUM #650 PANOPLY MINERALCompany NameMALARKEY ROOFING COMPANY (continued)197

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETM5-EID 5 #605 PANOPLY #506 SUPER 6 #650 PANOPLY MINERALM5-EBD 5 #605 PANOPLY #501 PREMIUM I #650 PANOPLY MINERALM5-FHD 5 #1000 ESHAVENT #500 PREMIUM #650 PANOPLY MINERALM5-FID 5 #1000 ESHAVENT #506 SUPER 6 #650 PANOPLY MINERALM5-FBD 5 #1000 ESHAVENT #501 PREMIUM I #650 PANOPLY MINERALF2-BXG 2 #501 PREMIUM I #1020 ESHALUMF2-EXG 2 #605 PANOPLY #1020 ESHALUMF3-BHG 3 #501 PREMIUM I #500 PREMIUM #1020 ESHALUMF3-BIG 3 #501 PREMIUM I #506 SUPER 6 #1020 ESHALUMF3-BBG 3 #501 PREMIUM I #501 PREMIUM I #1020 ESHALUMF3-EHG 3 #605 PANOPLY #500 PREMIUM #1020 ESHALUMF3-EIG 3 #605 PANOPLY #506 SUPER 6 #1020 ESHALUMF3-EBG 3 #605 PANOPLY #501 PREMIUM I #1020 ESHALUMNEW / REPLACEMENT See descritpion of the following specs under New / Replacement Non-NailableNAILABLEM3-BBB M3-BCB M3-BDBM3-EHB M3-EIB M3-EBBM3-EEB M4-BHB M4-BIBM4-BBB M4-EEB M5-BHBM5-BIB M5-EHB M5-EIBM3-BHC M3-BIC M3-BBCM3-EHC M3-EIC M3-EBCM3-EEC M4-BHC M4-BICM4-BBC M4-EHC M4-EICM4-EBC M5-BHC M5-BICM5-BBC M5-EBC M3-BHDM3-BID M3-BBD M3-EHDM3-EID M3-EBD M3-EEDM4-BHD M4-BID M4-BBDM4-EHD M4-EID M4-EBDM5-EHD M5-EID M5-EBDF2-BXG F2-EXG F3-BHGF3-BIG F3-BBG F3-EHGF3-EIGF3-EBGN3-BHBN3-BIBNEW / REPLACEMENT See description of the following specs under New / Replacement Non-NailableINSULATEDM2-CXB M2-DXB M2-EXBM3-BHB MS-BIB M3-BBBM3-BCB M3-BDB M3-EHBM3-EIB M3-EBB M3-EEBM3-FHB M3-FIB M3-FBBM3-FEB M4-BHB M4-BIBM4-BBB M4-EBB M4-FEBM5-BHB M5-BIB M5-EIBM2-CXC M2-DXC M2-EXCM3-BHC M3-BIC M3-BBCM3-EHC M3-EIC M3-EBCM3-EEC M3-FHC M3-FICM3-FBC M3-FCC M3-FDCM3-FEC M4-BHC M4-BICM4-BBC M4-EHC M4-EICM4-EBC M4-FHC M4-FICM4-FBC M4-FEC M5-BHCM5-BIC M5-BBC M5-EBCM6-FHC M5-FIC M5-FBCM2-CXD M2-DXD M2-EXDM3-BHD M3-BID M3-BBDM3-EHD M3-EID M3-EBDM3-EED M3-FHD M3-FIDM3-FBD M3-FED M4-BHDM4-BID M4-BBD M4-EHDM4-EID M4-EBD M4-FHDM4-FID M4-FBD M4-FEDM5-EHD M5-EID M5-EBDM5-FHD M5-FID M5-FBDF3-BHG F3-BIG F3-BBGF3-EHG F3-EIG F3-EBGRECOVER See description of the following specs under New / Replacement Non-NailableEXISTING ROOFM3-BBBM3-BCBM3-EHB M3-EIB M3-BDBM3-EEB M3-FHB M3-EBBM3-FBB M3-FEB M3-FIBM4-BIB M4-BBB M4-BHBM4-FHB M4-FIB M4-EBBM4-FEB M5-BHB M4-FBB]M5-RHB M5-EIB M5-BIBM3-BIC M3-BBC M3-BHCM3-EIC M3-EBC M3-EHCM3-FHC M3-FIC N3-EECM3-FCC M3-FDC M3-FBCM4-BHC M4-BIC M3-FECM4-EHC M4-EIC M4-BBCM4-FHC M4-FIC M4-EBC198

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETM4-FEC M5-BHC M4-FBCM5-BBC M5-EBC M5-BICM5-FIC M5-FBC M5-FHCM3-BID M3-BBD M3-BHDM3-EID M3-EBD M3-EHDM3-FHD M3-FID M3-EEDM3-FED M4-BHD M3-FBDM4-BBD M4-EHD M4-BIDM4-EBD M4-FHD M4-EIDME-FBD M4-FED M4-FIDM5-EID M5-EBD M5-EHDM5-FID M5-FBD M5-FHDM4-BBE M4-EBE F3-BHGF3-BIG F3-BBG F3-EHGF3-EIGF3-EBGM3-BHBMS-BIBRECOVEREXISTING ROOF See description of the following specs under New / Replacement Non-NailableINSULATED ADDEDM2-CXB M3-FIE M3-BBBM3-BHB M2-DXB M3-EHBM3-BCB MS-BIB M3-EEBM3-EIB M3-BDB M3-FBBM3-FHB M3-EBB M4-BIBM3-FEB M3-FIB M4-EHBM4-BBB M4-BHB M5-EHBM5-BHB M4-EBB M2-DXCM5-BIB M5-EIB M3-BICM2-EXC M2-CXC M3-EICM3-BBC M3-BHC M3-FHCM3-EBC M3-EHC M3-FCCM3-FIC M3-EEC M4-BHCM3-FDC M3-FBC M4-EHCM4-BIC M3-FEC M4-FHCM4-EIC M4-BBC M4-FECM4-FIC M4-EBC M5-BBCM5-BHC M4-FBC M5-FICM5-EBC M5-BIC M2-DXDM5-FBC M5-FHC M3-BIDM2-EXD M2-CXD M3-EIDM3-BBD M3-BHD M3-FHDM3-EBD M3-EHD M3-FEDM3-FID M3-EED M4-BBDM4-BHD M3-FBD M4-EBDM4-EHD M4-BID M4-FBDM4-FHD M4-EID M4-EIDM4-FED M4-FID M5-FIDM4-EBD M4-EHD F2-BXGM5-FBD M5-FHD F3-BIGF2-EXG F3-BHG F3-EIGF3-BBGF3-EHGF3-EBGM2-EXBCompany NameMONSEY BAKOR DIVISION OF HENRY CO.NAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETNew / ReplacementNON-NAILABLECDU/PMR 2004 2 G100s/s[p/s] OR G100gM[MFR] OR NP180gM[MFR] orNP180s/s[p/s][p/p] NP250gM[MFR] or NP250gT4[TFR]CDU 2004 2 COATED GLASS BASE NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]NEW / REPLACEMENTNAILABLEWDU/PMR 2005 2 NONE NP180s/s[p/s][p/p] OR G100s/s[p/s] G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]WDU/PMR 2005 2 COATED GLASS BASE NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]NEW / REPLACEMENTINISULATEDSDI-2000 2 NONE G100s/s[p/s] OR NP180s/s[p/p][p/s] G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]Company NameMONSEY BAKOR DIVISION OF HENRY CO. (continued)CDI-2001 2 NONE G100s/s[p/s] OR NP180s/s[p/p][p/s] G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]199

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETWDI-2002 2 NONE G100s/s[p/s] OR NP180s/s[p/p][p/s] G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]SDI-2000 2 COATED GLASS SHEET NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]CDI-2001 2 COATED GLASS SHEET NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]WDI-2002 2 COATED GLASS SHEET NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]REC-2006 1 NONE NP180gM[MFR] or NP180gT[TFR] orNP250gM[MFR] or NP250gT4[TFR]RECOVEREXISTING ROOFINSULATION ADDEDREC-2006 2 NONE G100s/s[p/s] OR NP180s/s[p/s][p/p G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]REC-2006 2 COATED BASE SHEET G100gM[MFR] OR NP180gM[MFR] orNP250gM[MFR] or NP250gT4[TFR]Company NameNEW / REPLACEMENTNON-NAILABLEPERFORMANCE ROOF SYSTEMS, INC.NNC 2 APPROVED BASE SHEET BITUTAK MB OR MB MINERAL OPTIONAL OPTIONALNEW /REPLACEMENTNAILABLE1N1X-() 2 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS1N1G-() 2 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP2N1X-() 3 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS2N1G-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP3N1X-() 4 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS3N1G-() 4 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP1N2X-() 3 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS DERBIGUM-XPS/DERBICOLOR-XPS1N2G-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-GP/DERBICOLOR-GP2N2X-() 4 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS DERBIGUM-XPS/DERBICOLOR-XPS2N2G-() 4 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-GP/DERBICOLOR-GPND 2 APPROVED BASE SHEET BITUTAK MB OR MB MINERAL OPTIONAL OPTIONALNEW / REPLACEMENTINSULATED1I1X-() 2 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS1I1G-() 2 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP2I1X-() 3 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS2I1G-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP3I1X-() 4 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS3I1G-() 4 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP1I2X-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-XPS/DERBICOLOR-XPS1I2G-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-GP/DERBICOLOR-GP2I2X-() 4 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-XPS/DERBICOLOR-XPS2I2G-() 4 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP DERBIGUM-GP/DERBICOLOR-GP0I2X-() 2 NONE DERBIGUM-XPS/DERBICOLOR-XPS0I2G-() 2 NONE DERBIGUM-GP/DERBICOLOR-GPINS 2 APPROVED BASE SHEET BITUTAK MB OR MB MINERAL OPTIONAL OPTIONALRECOVEREXISTING ROOF1R1X-() 2 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS1R1G-() 2 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GP2R1X-() 3 GLASS FIBER DERBIGUM-XPS/DERBICOLOR-XPS2R1G-() 3 GLASS FIBER DERBIGUM-GP/DERBICOLOR-GPRCV 2RECOVEREXISTING ROOF See New / Replacement InsulatedINSULATION ADDED200

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETCompany NamePOLYGLASS USA, INC.NEW / REPLACEMENTNON-NAILABLE101PS 1 NONE POLYFLEX SMOOTH101PG 1 NONE POLYFLEX GRANULAR201PS 2 APPROVED POLYFLEX SMOOTH201PG 2 APPROVED POLYFLEX GRANULAR201PGFR 2 APPROVED POLYFLEX GRANULAR FR211DS/DG 2 APPROVED DUFLEX SMOOTH/GRANULAR211EST 2 APPROVED ELASTOSHIELD TS4311/DS/DG 3 APPROVED APPROVED DUFLEX SMOOTH/GRANULAR321EST 3 APPROVED APPROVED ELASTOSHIELD TS4341EFGSF 3 APPROVED APPROVED ELASTOFLEX G S6-FR341FVG 3 APPROVED APPROVED ELASTOFLEX VG341FVGF 3 APPROVED APPROVED ELASTOFLEX VG-FR391PS 3 APPROVED APPROVED POLYFLEX SMOOTH391PG 3 APPROVED APPROVED POLYFLEX GRANULAR391DS/DG 3 APPROVED APPROVED DUFLEX SMOOTH/GRANULARNEW / REPLACEMENTNAILABLE202PS 2 APPROVED POLYFLEX SMOOTH202PG 2 APPROVED POLYFLEX GRANULAR104IN 1 NONE INSULROOFINGNEW / REPLACEMENTINSULATED103PS 1 NONE POLYFLEX SMOOTH103PG 1 NONE POLYFLEX GRANULAR203PS 2 APPROVED POLYFLEX SMOOTH203PG 2 APPROVED POLYFLEX GRANULAR203PGFR 2 APPROVED POLYFLEX GRANULAR FR204PS 2 APPROVED POLYFLEX SMOOTH204PG 2 APPROVED POLYFLEX GRANULAR204PGFR 2 APPROVED POLYFLEX GRANULAR FR213DS/DG 2 APPROVED DUFLEX SMOOTH/GRANULAR223EST 2 APPROVED ELASTOSHIELD TS4224EST 2 APPROVED ELASTOSHIELD TS4223PA/PR 2 APPROVED POLYALL OR POLYRAM303PGFR 3 APPROVED APPROVED POLYFLEX GRANULAR FR393PS/PG 3 APPROVED POLYFLEX SMOOTH/GRANULAR304PG/FR 3 APPROVED POLYFLEX GRANULAR FR313DS/DG 3 APPROVED DUFLEX SMOOTH/GRANULAR343EFGS 3 APPROVED ELASTOFLEX GL-S6343EFVG 3 APPROVED ELASTOFLEX VG343EFVGF 3 APPROVED ELASTOFLEX VG-FR333PA/PR 3 APPROVED POLYALL OR POLYRAMRECOVER See New / Replacement, Nailable and Non-NailableEXISTING ROOFRECOVEREXISTING ROOFINSULATION ADDEDCompany NameSee New / Replacement, Nailable and Non-NailableSIPLAST INCNEW / REPLACEMENTNON-NAILABLE2030CPH 3 PUNCHED GLASS BASE PARADIENE 20 PARADIENE 302030CAA 3 PUNCHED GLASS BASE PARADIENE 20 PARADIENE 304040CPT 3 PUNCHED GLASS BASE IREX VERAL5000CPH 2 PUNCHED GLASS BASE PARAFOR 505000CAA 2 PUNCHED GLASS BASE PARAFOR 505000CPT 2 PUNCHED GLASS BASE PARAFOR 501035CPH 3 PUNCHED GLASS BASE PARATECH& PARABASENEW / REPLACEMENTNAILABLE2030PSH 3 PARAGLAS PARADIENE 20 PARADIENE 302030WSH 3 PARAGLAS PARADIENE 20 PARADIENE 302030CBH 3 PARABASE PARADIENE 20 PARADIENE 302030PSA 3 PARAGLAS PARADIENE 20 PARADIENE 302030WSA 3 PARAGLAS PARADIENE 20 PARADIENE 302030CBA 3 PARABASE PARADIENE 20 PARADIENE5000PSA 2 PARAGLAS PARAFOR 50201

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.Company NameTOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETSIPLAST INC (continued)NAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETNEW / REPLACEMENTNAILABLE (contd)5000WSA 2 PARAGLAS PARAFOR 505000CBA 2 PARABASE PARAFOR 505000PIT 2 NONE IREX PARAFOR 505000WIT 2 NONE IREX PARAFOR 505000CBT 2 PARABASE PARAFOR 503040PGH 2 PARABASE PARADIENE 403040CGH 2 PARABASE PARADIENE 401035CBH 3 PARABASE & PARAGLAS PARATECHNEW / REPLACEMENTINSULATED2030IH 2 NONE PARADIENE 20 PARADIENE 302030IA 2 NONE PARADIENE 20 PARADIENE 304040IT 2 NONE IREX VERAL5000IH 1 NONE PARAFOR 505000IA 1 NONE PARAFOR 505000IT 1 NONE PARAFOR 501035IH 2 PARABASE PARATECHRECOVEREXSITING ROOFINSULATION ADDED2030IH 2 NONE PARADIENE 20 PARADIENE 302030IA 2 NONE PARADIENE 20 PARADIENE 304040IT 2 NONE IREX VERAL5000IH 1 NONE PARAFOR 505000IA 1 NONE PARAFOR 505000IT 1 NONE PARAFOR 501035IH 2 PARABASE PARATECHCompany NameTAMKO ROOFING PRODUCTS INC.NEW / REPLACEMENTNAILABLE111 2 VAPOR CHAN AWAPLAN PREMIUM112 2 43 BASE/BASE-N-PLY AWAPLAN PREMIUM113 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM114 3 43 BASE/BASE-N-PLY GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM111C 2 VAPOR CHAN AWAPLAN PREMIUM111HW 2 VAPOR CHAN AWAPLAN HEAT WELD112C 2 43 BASE/BASE-N-PLY AWAPLAN PREMIUM112HW 2 43 BASE/BASE-N-PLY AWAPLAN HEAT WELD113HW 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN HEAT WELD114HW 3 43 BASE/BASE-N-PLY GLASS PLY (NONMODIFIED) AWAPLAN HEAT WELD111FR 2 VAPOR CHAN AWAPLAN PREMIUM FR112FR 2 VAPOR CHAN AWAPLAN PREMIUM FR113FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM FR114FR 3 GLASS BASE GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM FR211 2 VAPOR CHAN AWAPLAN 170212 2 43 BASE/BASE-N-PLY AWAPLAN 170213 3 VAPOR CHAN TAM-GLASS PREMIUM (NONMOD) AWAPLAN 170214 3 43 BASE/BASE-N-PLY TAM-GLASS PREMIUM (NONMOD) AWAPLAN 170211C 2 VAPOR CHAN AWAPLAN 170212C 2 43 BASE/BASE-N-PLY AWAPLAN 170211FR 2 VAPOR CHAN AWAPLAN 170 FR212FR 2 GLASS BASE AWAPLAN 170 FR745 3 VAPOR CHAN AWAPLAN VERSA SMOOTH VERSA CAP FR1013 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAFLEX1014 3 BASE-N-PLY GLASS PLY (NONMODIFIED) AWAFLEX1111 2 VAPOR CHAN SPEEDWELD GRANULATED1112 2 GLASS BASE SPEEDWELD GRANUALTED1211 2 VAPOR CHAN SPEEDWELD SMOOTH1212 2 GLASS BASE SPEEDWELD SMOOTH1312 2 BASE-N-PLY AWAPLAN VERSA FLEX1013FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED)1014FR 3 BASE-N-PLY GLASS PLY (NONMODIFIED)NEW / REPLACEMENTINSULATED101 2 GLASS BASE AWAPLAN PREMIUM102 3 2 TAMKO PLY SHEETS AWAPLAN PREMIUM103 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN PREMIUM107 2 NONE VERSA BASE AWAPLAN PREMIUM108 4 3 TAMKO PLY SHEETS AWAPLAN PREMIUMNEW / REPLACEMENT202

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETINSULATED (contd)109 3 NONE VERSA BASE TAM-GLASS PREMIUM (NONMOD) AWAPLAN PREMIUM101C 2 GLASS BASE AWAPLAN PREMIUM107C 2 NONE VERSA BASE AWAPLAN PREMIUM243 3 NONE AWAPLAN VERSA SMOOTH 2 TAMKO PLY SHEETS (NONMOD)201C 2 GLASS BASE AWAPLAN 170207C 2 NONE VERSA BASE AWAPLAN 170101HW 2 GLASS BASE AWAPLAN HEAT WELDING102HW 3 2 TAMKO PLY SHEETS AWAPLAN HEAT WELDING103HW 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN HEAT WELDING107HW 2 NONE VERSA BASE AWAPLAN HEAT WELDING108HW 4 3 TAMKO PLY SHEETS AWAPLAN VERSA SMOOTH109HW 3 NONE VERSA BASE TAM-GLASS PREMIUM (NONMOD) AWAPLAN HEAT WELDING101FR 2 GLASS BASE AWAPLAN PREMIUM FR102FR 3 2 TAMKO PLY SHEETS AWAPLAN PREMIUM FR107FR 2 NONE VERSA BASE AWAPLAN PREMIUM FR108FR 4 3 TAMKO PLY SHEETS AWAPLAN PREMIUM FR109FR 3 NONE VERSA BASE TAM-GLASS PREMIUM (NONMOD) AWAPLAN PREMIUM FR201 2 GLASS BASE AWAPLAN 170203 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN 170202 3 2 TAMKO PLY SHEETS AWAPLAN 170204 2 AWAPLAN VERSA FLEX AWAPLAN 170207 2 NONE VERSA BASE AWAPLAN 170208 4 3 TAMKO PLY SHEETS AWAPLAN 170209 3 NONE TAM-GLASS PREMIUM (NONMOD) VERSA BASE AWAPLAN 170201FR 2 GLASS BASE AWAPLAN 170 FR203FR 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN 170 FR204FR 2 AWAPLAN VERSA FLEX AWAPLAN 170 FR207FR 2 NONE VERSA BASE AWAPLAN 170 FR208FR 4 3 TAMKO PLY SHEETS AWAPLAN 170 FR209FR 3 NONE TAM-GLASS PREMIUM (NONMOD) VERSA BASE AWAPLAN 170 FR244 2 NONE AWAPLAN VERSA-SMOOTH TAM-CAP701 2 NONE VERSA BASE VERSA CAP FR744 2 GLASS BASE (OPTIONAL) AWAPLAN VERSA SMOOTH VERSA CAP FR703 3 NONE 2 PLIES VERSA BASE VERSA CAP FR704 3 2 PLIES TAM-PLY IV VERSA CAP FR705 4 3 PLIES TAM-PLY IV VERSA CAP FR706 5 4 PLIES TAM-PLY IV VERSA CAP FR1001 2 BASE-N-PLY AWAFLEX1002 3 2 TAMKO PLY SHEETS AWAFLEX103FR 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN PREMIUM FR203FR 2 NONE AWAPLAN VERSA SMOOTH AWAPLAN 170 FR1001 FR 2 BASE-N-PLY AWAFLEX FR1002 FR 3 2 TAMKO PLY SHEETS AWAFLEX FR1101/1101 M 2 GLASS BASE SPEEDWELD GRANULATED1102 3 2 TAMKO PLY SHEETS SPEEDWELD GRANULATED1201/1201 M 2 GLASS BASE SPEEDWELD SMOOTH1202 3 2 TAMKO PLY SHEETS SPEEDWELD SMOOTH1304 2 AWAPLAN VERSA FLEX AWAPLAN VERSA FLEX1343 3 AWAPLAN VERSA FLEX 2 TAMKO PLY SHEETSRECOVEREXISTING ROOF135 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM136 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM135HW 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN HEAT WELDING136HW 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN HEAT WELDING135FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM FR136FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN PREMIUM FR235 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN 170236 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN 170235FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN 170 FRRECOVEREXISTING ROOF236FR 3 VAPOR CHAN GLASS PLY (NONMODIFIED) AWAPLAN 170 FR1134 2 VAPOR CHAN SPEEDWELD GRANUALTED1234 2 VAPOR CHAN SPEEDWELD SMOOTHRECOVEREXISTING ROOF See New / Replacement, InsulatedINSULATION ADDED203

Modified Bitumen Part 3: Modified Bitumen SpecificationsTYPE OF ROOFINSTALLATION &SUBSTRATEMANUFACTURER'SSPECIFICATION NO.TOTALNUMBER OFPLIES INMEMBRANEASSEMBLYBASE SHEETDESCRIPTIONIF OTHER THANMODIFIEDBITUMEN SHEETNAME(S) OF MODIFIED BITUMEN SHEET(S) USED IN MEMBRANEFIRST SHEET SECOND SHEET THIRD SHEETCompany NameTEXAS REFINERY CORP.NEW / REPLACEMENTNON-NAILABLEN-101 3 TYPE II GLASBASE MIGHTYPLATE MIGHTYPLATEN-102 3 APPROVED MIGHTYPLATE MIGHTYPLATENEW / REPLACEMENTNAILABLEN-301 3 TYPE II GLASBASE MIGHTYPLATE MIGHTYPLATEN-302 3 APPROVED MIGHTYPLATE MIGHTYPLATENEW / REPLACEMENTINSULATEDN-201 3 TYPE II GLASBASE MIGHTYPLATE MIGHTYPLATEN-202 3 APPROVED MIGHTYPLATE MIGHTYPLATEN-203 2 NONE MIGHTYPLATE MIGHTYPLATERECOVEREXISTING ROOFE-401 1 NONE MIGHTYPLATERECOVEREXISTING ROOFINSULATION ADDEDE-501 1 NONE MIGHTYPLATEE-502 2 TYPE II GLASBASE MIGHTYPLATEE-503 2 APPROVED MIGHTYPLATECOMPANY NAMENEW / REPLACEMENTNON-NAILABLENEW / REPLACEMENTNAILABLENEW / REPLACEMENTINSULATEDTEXSA, S.A.1 - HIPER M.P.1 - MIN TEXAL -15 FP-S2 - TEXAL FV 3MM TEXAL -15 FP-S 4MM1 - TEXAL -15 FP-S 4MM1 - MIN MOFLEX -20 FP-S2 - TEXAL FV 3MM MIN MOFLEX -20 FP-S1 - M.P. PARKING1 MINERAL M.P. 5KG FM2 TEXAL FV 3MM TEXAL -15 FP-S 4MM2 HIPER M.P. TEXAL PY MIN2 TEXAL FV 3MM MIN MOFLEX -20 FP-S204

THIS PAGE LEFT BLANK INTENTIONALLY

PVC Part 1: <strong>General</strong> Information1. COMPANY NAME DURADEK FIRESTONE FIRESTONE FLEX FLEXBUILDING BUILDING MEMBRANE MEMBRANEPRODUCTS PRODUCTS INTERNATIONAL INTERNATIONAL2. PRODUCT NAME ULTRA ULTRAPLY ULTRAPLY FLEX FLEX0.45 0.6 MF/F 50 MF/R 603. PRODUCT DESCRIPTIONReinforcement POLYESTER 10 POLYESTER POLYESTER REINF POLY. REINF POLY.Colors WHITE WHITE WHITE /OFF WHITEWHITE /OFF WHITEInstalled Weight (lbs./ft 2 w/o ballast) 0.40 0.30 NOM 0.40 NOM 0.35 0.454. COATING REQUIRED NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X XReroofing X X X X X6. FIELD LAP JOINT METHOD HEAT WELD HEAT WELD HEAT WELD HOT AIR WELD HOT AIR WELD7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 LBS. 10 LBS. 10 MIN. 10 MIN.Partially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) ADHESIVE CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X8. MINIMUM SLOPE REQUIRED POSITIVE DRAIN POSITIVE DRAIN POSITIVE DRAIN DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber O O S O S OMineral Fiber O O S O S OPolystyrene O O S O S OCellular Glass O O S O S OPhenolicFiberboard X X X XPerlite X O X OPolyisocyanurate X X X XPolyurethane O OGypsum O O X O X OConcrete X O O S O S OWood Plank O O S O S OPlywood X O O X O X SExisting Built-Up Membrane O O S O S O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 30 - 100 0 – 120 0 – 120 0 – 120 0 – 12012. FLASHING MATERIAL PVC MEMBRANE ULTRAPLY ULTRAPLY ROOF ROOFPVC METAL CTD / METAL / CTD / METAL / MEMBRANE / MEMBRANE /REINFORCED REINFOCED CTD METAL CTD METALMEMBRANEMEMBRANE13. FLASHING METHOD HEAT WELD HEAT WELD HEAT WELD HEAT WELD HEAT WELDORADHESIVEORADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USAManufacture USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1974 1992Within USA 1976 1986 1994 1988 198817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA THOUSANDS THOUSANDS THOUSANDSWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 12 5 5 4 420. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: J. DOYLE J. DOYLE800/338-3568 800/428–4442 800/428–4442 610/286–7788 610/286–778822. FOR TECHNICAL INFORMATION, CONTACT: M GIANGIACOMO M GIANGIACOMO23. SEE APPENDIX IF CHECKED800/338-3568 800/428–4511 800/428–4511 610/286–7788 610/286–7788206

PVC Part 1: <strong>General</strong> InformationGAF GAF GAF GAF GAF GAF GAF GAF GAF GAFMATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALSCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARDEGSR-40 EGSR-45 EGSR-50 EGSR-60 EGSR-80 EGFB-40 EGFB-45 EGFB-50 EGFB-60 EGFB-80POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLY/FLEECE BK POLY/FLEECE BK POLY/FLEECE BK POLY/FLEECE BK POLY/FLEECE BKWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOMWHITE / GRAY /CUSTOM0.26 0.29 0.32 0.38 0.51 0.30 0.33 0.36 0.43 0.55NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XHOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD10 10 10 10 10 10 10 10 10 10MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST MECH. FAST MECH. FAST. MECH. FAST.ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHES/ASPHALT ADHES/ASPHALT ADHES/ASPHALT ADHES/ASPHALT ADHES/ASPHALTX X X X X X X X X XPER CODE PER CODE PER CODE PER CODE PER CODE PER CODE PER CODE PER CODE PER CODE PER CODEX X X X X O O O O OX X X X X X X X X XX X X X XX X X X X X X X X XX X X X X X X X X XX O X O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0 -120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120 0 - 120REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCEDMEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANECOATED METAL COATED METAL COATED METAL COATED METAL COATED METAL COATED METAL COATED METAL COATED METAL COATED METAL COATED METALHOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELDOR OR OR OR OR OR OR OR OR ORADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIV E ADHESIVE ADHESIVE ADHESIVE ADHESIVEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1988 1988 1988 1988 1988 1990 1990 1990 1990 1990MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+ MILLIONS+DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT4 4 4 4 4 4 4 4 4 4YES YES YES YES YES YES YES YES YES YESREGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONALOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICETECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICALSERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES207

PVC Part 1: <strong>General</strong> Information1. COMPANY NAME GENFLEX GLENFLEX GLENFLEX GLENFLEX GLENFLEXROOFING ROOFING ROOFING ROOFING ROOFINGSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS2. PRODUCT NAME GENFLEX GENFLEX GENFLEX GENFLEX GENFLEXRM.048 RM .060 RMT .080 RM-C .048 RM-C .0603. PRODUCT DESCRIPTIONReinforcement POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERColors WHITE / GRAY /TANWHITE / GRAY /TANWHITE WHITE / GRAY /TANWHITE / GRAY /TANInstalled Weight (lbs./ft 2 w/o ballast) 0.30 0.40 0.51 0.30 0.304. COATING REQUIRED NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X XReroofing X X X X X6. FIELD LAP JOINT METHOD HOIT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X X X X XMineral Fiber X X X X XPolystyrene S S S S SCellular Glass X X X X XPhenolicFiberboard X X X X XPerlite X X X X XPolyisocyanurate X X X X XPolyurethaneGypsum X X X X XConcrete O O O O OWood Plank O O O O OPlywood O O O O OExisting Built-Up Membrane O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE SPECS11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 140 0 – 140 0 – 140 0 – 14012. FLASHING MATERIAL PVC MEMBRANE PVC MEMBRANE PVC MEMBRANE PVC MEMBRANE PVC MEMBRANEOR PVC-COATED OR PVC-COATED OR PVC-COATED OR PVC-COATED OR PVC-COATEDMATERIAL MATERIAL MATERIAL MATERIAL MATERIAL13. FLASHING METHOD SOLVENT SOLVENT SOLVENT SOLVENT SOLVENTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR OR OR OR ORHOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USAManufacture USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1983 1983Within USA 1980 1980 1989 1995 199517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 8 8 8 8 820. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES OFFICE SALES OFFICE SALES OFFICE SALES OFFICE SALES OFFICE800/443-4272 800/443-4272 800/443-4272 800/443-4272 800/443-427222. FOR TECHNICAL INFORMATION, CONTACT: TECH. SERVICE TECH. SERVICE TECH. SERVICE TECH. SERVICE TECH. SERVICE23. SEE APPENDIX IF CHECKED800/443-4272 800/443-4272 800/443-4272 800/443-4272 800/443-4272208

PVC Part 1: <strong>General</strong> InformationIB ROOF IB ROOF IB ROOF IB ROOF JOHNS JOHNS JOHNS JOHNS JOHNS MULE-HIDESYSTEMS SYSTEMS SYSTEMS SYSTEMS MANVILLE MANVILLE MANVILLE MANVILLE MANVILLE PRODUCTSINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL CO., INC.IB SINGLE-PLY INSULATED SINGLE-PLY SINGLE-PLY ULTRAGARD ULTRAGARD ULTRAGARD ULTRAGARD ULTRAGARD MH 50BLANKET 60 MIL. 80 MIL.. V250 V260 SR 50 SR 60 SR80POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERWHITE / TAN / WHITE / TAN / WHITE WHIE BLACK BLACK WHITE WHITE WHITE WHITEGRAY / BLUE GRAY / BLUE0.33 0.33 0.41 0.55 0.42 0.44 0.42 0.44 0.58 0.42NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XHOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR HOT AIR HOT AIR HOT AIR HOT AIR HEAT WELDBALLASTED BALLASTED BALLASTED BALLASTEDMECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.NONE NONE NONE NONE NONEX X X X O O O O O OS S S S S O S O S O S O S O S OX S X S X S X S S O S O S O S O S O S OS X S S S O S O S O S O S O S OX X X XX S X S X S X S X X X X X XX X X X X O X O X O X O X O X OX X X X X X X X X XX X X X X X X X X XX X X X X O X O X O X O X O X OX S X S X S X S S O S O S O S O S O S OS S S S S O S O S O S O S O S OS S S S X S X S X S X S X S X SS S S S S O S O S O S O S O S ONONE NONE NONE NONE SEE SPECS SEE SPECS SEE SPECS SEE SPECS SEE MFR SEE SPECS0-120 0-120 0-120 0-120 0 – 120 0 – 120 0 – 120 0 – 120 0 – 120 0 – 120IB MEMBRANE IB MEMBRANE IB MEMBRANE IB MEMBRANE PVC-COATED PVC-COATED PVC-COATED PVC-COATED PVC-COATED PVC-COATEDCPA CLAD METAL CPA CLAD METAL CPA CLAD METAL CPA CLAD METAL METAL / METAL / METAL / METAL / METAL / METAL /PREFABRICATED PREFABRICATED PREFABRICATED PREFABRICATED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCEDFLASHING FLASHING FLASHING FLASHING MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANE MEMBRANEHOT AIR WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEAND AND AND AND AND ORHOT AIR HOT AIR HOT AIR HOT AIR HOT AIR HOT WELDYES YES YES YES YES YES YES YES YES YESUSA USA USA USAUSA & CANADA USA & CANADA USA & CANADA USA & CANADA USA USA USA USA USA USA1987 19871979 1979 1994 1994 1989 1986 1990 1989THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSMILLIONS MILLIONS MILLIONS MILLIONS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DISTRIBUTORS5 5 5 5 4 4 4 4 4 12YES YES YES YES YES YES YES YES YES YES800/426-1626 800/426-1626 800/426-1626 800/426-1626 REGIONAL OFFICEREGIONAL OFFICEREGIONAL OFFICEREGIONAL OFFICEREGIONAL OFFICE 800/786-1492800/426-1626 800/426-1626 800/426-1626 800/426-1626 M. REW M. REW M. REW M. REW M. REW 800/786-1492209

PVC Part 1: <strong>General</strong> Information1. COMPANY NAME MULE-HIDE MULE-HIDE MULE-HIDE SARNAFIL, SARNAFIL,PRODUCTS PRODUCTS PRODUCTS INC. INC.CO., INC. CO., INC. CO., INC.2. PRODUCT NAME MH 60 PEM .040 PEM 060 SARNAFIL SARNAFILG 410 S 3273. PRODUCT DESCRIPTIONReinforcement POLYESTER POLYESTER POLYESTER FIBERGLASS POLYESTERColors WHITE WHITE WHITE ASSORTED ASSORTEDInstalled Weight (lbs./ft 2 w/o ballast) 0.44 0.30 NOM 0.40 NOM 0.33 0.334. COATING REQUIRED NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X XReroofing X X X X X6. FIELD LAP JOINT METHOD HEAT WELD HEAT WELD HEAT WELD HOT AIR HOT AIR7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted (ballast: lbs./ft 2 )Partially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly8. MINIMUM SLOPE REQUIRED NONE NONE NONE9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber O O O O OMineral Fiber S O O O O OPolystyrene S O O O O SCellular Glass S O O O O OPhenolicFiberboard X X X X XPerlite X O X X O OPolyisocyanurate X X X X XPolyurethane X X X X XGypsum X O X O X O O S OConcrete S O S O S O X O S OWood Plank S O S O S O O S OPlywood X S X S X S X O X S OExisting Built-Up Membrane S O S O S O O S O10. RESTRICTED REGIONS (refer to manufacturer's literature) SEE SPECS NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 120 0 – 120 0 – 120 0 – 120 0 – 12012. FLASHING MATERIAL PVC-COATED REINFORCED REINFORCED G410, G459 G410, G459, S327WELDWELDMETAL / MEMBRANE MEMBRANE CLAD METAL ORREINFORCED COATED COATED CLAD METALMEMBRANE METAL METAL13. FLASHING METHOD ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR OR OR AND ANDHOT WELT HOT WELT HOT WELT HEAT WELD HEAT WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. COUNTRY OF:Origin USA USA SWITZERLAND SWITZERLANDManufacture USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1964 1964Within USA 1986 1986 1986 1975 197817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USA THOUSANDS THOUSANDSWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 12 15 15 6 620. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/786-1492 800/786-1492 800/786-1492 SALES DEPT. SALES DEPT.22. FOR TECHNICAL INFORMATION, CONTACT: 800/786-1492 800/786-1492 800/786-1492 TECH. DEPT. TECH. DEPT.23. SEE APPENDIX IF CHECKED X X210

PVC Part 1: <strong>General</strong> InformationSARNAFIL,INC.SARNAFILG 476FIBERGLASSORANGE0.33NONEXXHOT AIRWELDXNONEOOSXXSSSOOOONONE0 – 120G410, G459, S327ORCLAD METALADHESIVEANDHEAT WELDYESSWITZERLANDUSA19641981THOUSANDSTHOUSANDSDIRECT6YESSALES DEPT.TECH. DEPT.X211

PVC Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4434-951. COMPANY NAME DURADEK FIRESTONE FIRESTONE FLEX FLEX GAFBUILDING BUILDING MEMBRANE MEMBRAN MATERIALSPRODUCTS PRODUCTS INTERNATIONAL INTERNATIONAL CORP.2. PRODUCT NAME ULTRA ULTRAPLY ULTRAPLY FLEX FLEX EVERGUARD.045 .060 MF/R 50 MF/R 60 EGSR-403. TYPE I (unreinforced sheet)TYPE II (unreinforced sheet)GRADE 1 (containing fibers)GRADE 2 (containing fabrics)TYPE III (reinforced sheet containing fibers of fabrics) III lll lll lll lll III4. OVERALL THICKNESS (min. in.) 0.045 0.06 0.045 0.060 0.050 0.060 0.0405. TENSILE STRENGTH AT BREAK (min. psi) TYPE I;TYPE II; GRADE 1Machine Direction 1500 NA NA NA NA NACross-Machine Direction 1500 NA NA NA NA NA6. BREAKING STRENGTH (min. lbf/in.) TYPE II,250 450 250 > 230 > 250 305200GRADE 2; TYPE III7. ELONGATION AT BREAK (min. %) TYPE I; TYPEII; GRADE 1Machine Direction 250 NA NA NA NACross-Machine Direction 220 NA NA NA NA NATYPE II, GRADE 2; TYPE IIIMachine Direction 15* 30 30 > 20 > 20 25Cross-Machine Direction 15* 30 30 > 20 > 20 258. SEAM STRENGTH (min. % of tensile or breaking strength) 75.0 75.0 75.0 75.0 > 80 > 80 >959. RETENTION OF PROPERTIES AFTER HEATAGING (min. % of original)Tensile Strength TYPE I; TYPE II, GRADE 1 80.0 NA NA NABreaking Strength (min. lbf/in.) 80.0 80 80 > 80 > 80 >95Elongation at Break (min. %) TYPE I; TYPE II; GRADE 1 80.0 96 80 80 90 90 >9510. TEAR RESISTANCE (min. lbf) TYPE I; TYPE II, GRADE 1 10.0 NA NA NA11. TEARING STRENGTH (min. lbf) TYPE II, GRADE 45.0 50 150 80 > 50 > 50 1552; TYPE III12. LOW TEMPERATURE BEND pass PASS PASS PASS PASS PASS PASS13. ACCELERATED WEATHERING TESTCracking (7X magnification) none NONE NONE NONE NONE NONE NONEDiscoloration (by observation) negligible NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLECrazing (7X magnification) none NONE NONE NONE NONE NONE NONE14. LINEAR DIMENSIONAL CHANGE (max. %)TYPE I 3.0 NA NA NA NA NATYPE II 0.1 NA NA NA NA NATYPE III 0.5 0.3 0.3 0.3 < 0.2 < 0.2 0.515. CHANGE IN WEIGHT AFTER IMMERSION INWATER (max %)16. SEE APPENDIX IF CHECKEDNA=not applicable* for reinforcing fabric only; elongation of PVC material shallbe the same as Type I±3.02 PASS PASS < 0.2 < 0.2 1.4212

PVC Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4434-95GAF GAF GAF GAF GAF GAF GAF GAF GAF GENFLEXMATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS ROOFINGCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. SYSTEMSEVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD EVERGUARD GENFLEXEGSR-45 EGSR-50 EGSR-60 EGSR-80 EGFB-40 EGFB-45 EGFB-50 EGFB-60 EGFB-80 RM .048III III III III III III III III III III0.045 0.050 0.060 0.080 0.055 0.060 0.065 0.075 0.095 0.048320 332 363 416 428 428 442 435 501 210NANANANA25 25 40 40 40 40 40 40 40 1525 25 40 40 35 35 35 35 40 15>95 >95 >95 >95 >95 >95 >95 >95 >95 >75.0NA>95 >95 >95 >95 >95 >95 >95 >95 >95>95 >95 >95 >95 >95 >95 >95 >95 >95 >95NA124 107 97 109 135 135 152 119 89 50PASS PASS PASS PASS PASS PASS PASS PASS PASS PASSNONE NONE NONE NONE NONE NONE NONE NONE NONE NONENEGLIGIBLE NEGLIGIBLE NEBLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLENONE NONE NONE NONE NONE NONE NONE NONE NONE NONENANA0.5 0.5 0.5 0.5 0.5 0.5 0.3 0.2 0.1

PVC Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4434-951. COMPANY NAME GENFLEX GENFLEX GENFLEX GENFLEX IB ROOF IB ROOFROOFING ROOFING ROOFING ROOFING SYSTEMS SYSTEMSSYSTEMS SYSTEMS SYSTEMS SYSTEMS2. PRODUCT NAME GENFLEX GENFLEX GENFLEX GENFLEX IB SINGLE-PLY INSULATEDRM .060 RM-T .080 RM-C .048 RM-C .060 BLANKET3. TYPE I (unreinforced sheet)TYPE II (unreinforced sheet)GRADE 1 (containing fibers)GRADE 2 (containing fabrics)TYPE III (reinforced sheet containing fibers of fabrics) III III III III III III4. OVERALL THICKNESS (min. in.) 0.045 0.060 0.080 0.048 0.060 0.050 0.0505. TENSILE STRENGTH AT BREAK (min. psi) TYPE I;TYPE II; GRADE 1Machine Direction 1500 NA NA NA NACross-Machine Direction 1500 NA NA NA NA6. BREAKING STRENGTH (min. lbf/in.) TYPE II,210 300 210 210 300 300200GRADE 2; TYPE III7. ELONGATION AT BREAK (min. %) TYPE I; TYPEII; GRADE 1Machine Direction 250 NA NA NA NACross-Machine Direction 220 NA NA NA NATYPE II, GRADE 2; TYPE IIIMachine Direction 15* 15 35 15 15 15 15Cross-Machine Direction 15* 15 40 15 15 15 158. SEAM STRENGTH (min. % of tensile or breaking strength) 75.0 >75.0 > 90.0 >75.0 >75.09. RETENTION OF PROPERTIES AFTER HEATAGING (min. % of original)Tensile Strength TYPE I; TYPE II, GRADE 1 80.0 NA NA NA NABreaking Strength (min. lbf/in.) 80.0 80.0 90 90Elongation at Break (min. %) TYPE I; TYPE II; GRADE 1 80.0 >95 80.0 >95 >95 90 9010. TEAR RESISTANCE (min. lbf) TYPE I; TYPE II, GRADE 1 10.0 NA NA NA NA11. TEARING STRENGTH (min. lbf) TYPE II, GRADE 45.0 50 100 50 50 50 502; TYPE III12. LOW TEMPERATURE BEND pass PASS PASS PASS PASS –40 –4013. ACCELERATED WEATHERING TESTCracking (7X magnification) none NONE NONE NONE NONE NONE NONEDiscoloration (by observation) negligible NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLECrazing (7X magnification) none NONE NONE NONE NONE NONE NONE14. LINEAR DIMENSIONAL CHANGE (max. %)TYPE I 3.0 NA NA NA NATYPE II 0.1 NA NA NA NATYPE III 0.5

PVC Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4434-95IB ROOF IB ROOF JOHNS JOHNS JOHNS JOHNS JOHNS MULE-HIDE MULE-HIDE MULE-HIDESYSTEMS SYSTEMS MANVILLE MANVILLE MANVILLE MANVILLE MANVILLE PRODUCTS PRODUCTS PRODUCTSINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL CO., INC. CO., INC. CO., INC.I B 60 MIL. IB 80 MIL. ULTRAGARD ULTRAGARD ULTRAGARD ULTRAGARD ULTRAGARD MH - 50 MH - 60 PEM .040V 250 V 260 SR 50 SR 60 SR 80III III III III III III III III III III0.060 0.080 0.047 0.054 0.047 0.054 0.072 0.050 0.060 0.040NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA340 400 412 396 412 396 420 412 396 > 250NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA60 130 32 32 32 32 33 32 32 3040 90 33 34 33 34 37 33 34 30101 103 101 103 129 101 103 75.0NA NA NA NA NA NA NA90 95 107 91 107 91 99 107 91 8092 96 125 127 125 127 223 125 127 80NA NA NA NA NA NA NA68 73 69 53 69 53 74 69 53 80PASS PASS PASS PASS PASS PASS PASS PASS PASS PASSNONE NONE NONE NONE NONE NONE NONE NONE NONE NONENEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE NEGLIGIBLENONE NONE NONE NONE NONE NONE NONE NONE NONE NONENA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA0.5 0.5 0.14 0.12 0.14 0.12 0.14

PVC Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4434-951. COMPANY NAME MULE-HIDE SARNAFIL SARNAFIL SARNAFILPRODUCTS INC. INC. INC.CO., INC.2. PRODUCT NAME PEM .060 SARNAFIL SARNAFIL SARNAFILG 410 S 327 G 4763. TYPE I (unreinforced sheet)TYPE II (unreinforced sheet) II IIGRADE 1 (containing fibers) 1 1GRADE 2 (containing fabrics)TYPE III (reinforced sheet containing fibers of fabrics) III III4. OVERALL THICKNESS (min. in.) 0.045 0.060 0.048 0.048 0.0485. TENSILE STRENGTH AT BREAK (min. psi) TYPE I;TYPE II; GRADE 1Machine Direction 1500 NA 1600 NA 1650Cross-Machine Direction 1500 NA 1600 NA 16506. BREAKING STRENGTH (min. lbf/in.) TYPE II,> 250 NA 230 NA200GRADE 2; TYPE III7. ELONGATION AT BREAK (min. %) TYPE I; TYPEII; GRADE 1Machine Direction 250 NA 270 NA 280Cross-Machine Direction 220 NA 250 NA 260TYPE II, GRADE 2; TYPE IIIMachine Direction 15* 30 NA 20 NACross-Machine Direction 15* 30 NA 20 NA8. SEAM STRENGTH (min. % of tensile or breaking strength) 75.0 75.0 >80 >85 >809. RETENTION OF PROPERTIES AFTER HEATAGING (min. % of original)Tensile Strength TYPE I; TYPE II, GRADE 1 80.0 95 NA 95Breaking Strength (min. lbf/in.) 80.0 80 NA 95 NAElongation at Break (min. %) TYPE I; TYPE II; GRADE 1 80.0 80 90 90 9010. TEAR RESISTANCE (min. lbf) TYPE I; TYPE II, GRADE 1 10.0 14 NA 1411. TEARING STRENGTH (min. lbf) TYPE II, GRADE 45.0 80 NA 50 NA2; TYPE III12. LOW TEMPERATURE BEND pass PASS PASS PASS PASS13. ACCELERATED WEATHERING TESTCracking (7X magnification) none NONE NONE NONEDiscoloration (by observation) negligible NEGLIGIBLE NEGLIGIBLE NEGLIGIBLECrazing (7X magnification) none NONE NONE NONE14. LINEAR DIMENSIONAL CHANGE (max. %)TYPE I 3.0 NA NA NA NATYPE II 0.1 NA 0.02 NA 0.02TYPE III 0.5

THIS PAGE INTENTIONALLY LEFT BLANK

EPDM Part 1: <strong>General</strong> Information1. COMPANY NAME CARLISLE CARLISLE CARLISLE CARLISLE CARLISLE CARLISLESYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC.2. PRODUCT NAME SURE-SEAL SURE-SEAL SURE-SEAL SURE-SEAL BRITE-PLY SURE-SEALEPDM FR FR HTM REINFORCEDEODM PLUS EPDM EPDM EPDM3. PRODUCT DESCRIPTIONReinforcement NONE NONE NONE YES NONE YESColors BLACK BLACK BLACK BLACK WHITE ON BLACKInstalled Weight (lbs./ft 2 w/o ballast) 0.28 0.31 0.35 0.32 0.35 0.304. COATING REQUIRED NONE NONE NONE NONE NONE NONEBLACK5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD TAPE OR TAPE OR TAPE OR TAPE OR CONTACT TAPE OR7. TYPES OF ROOF SYSTEMSCONTACT CONTACT CONTACT CONTACT ADHESIVE CONTACTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVELoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10 10Partially Adhered (method) MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X8. MINIMUM SLOPE REQUIRED NONE NONE NONE NONE NONE NONE9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X O X O X O X O X O X OMineral Fiber X O X O X O X O O X OPolystyrene X O X O X O X O X O X OCellular Glass X X X X X XPhenolicFiberboard X X X X X XPerlite X O X O X O X O O X OPolyisocyanurate X X X X X XPolyurethane X X X X X XGypsum X O X O X O X O X O X OConcrete X O X O X O X O X O X OWood Plankl X O X O X O X O X O X OPlywood X O X O X O X O X O X OExisting Built-up Membrane X O X O X O X O X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) –49 TO 180 –49 TO 180 –49 TO 180 –49 TO 180 –49 TO 180 –49 TO 18012. FLASHING MATERIAL UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDOR OR OR OR OR ORCURED EPDM CURED EPDM CURED EPDM CURED EPDM CURED EPDM CURED EPDM13. FLASHING METHOD ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE14. 14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1963 1983 1983 1998 1977 1986Within USA 1963 1983 1983 1998 1977 198617. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 70 70 70 70 70 7020. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: C. KUHL C. KUHL C. KUHL C. KUHL C. KUHL C. KUHL717/245–7000 717/245–7000 717/245–7000 717/245–7000 717/245–7000 717/245–700022. FOR TECHNICAL INFORMATION, CONTACT: S. IBRAHIM S. IBRAHIM S. IBRAHIM S. IBRAHIM S. IBRAHIM S. IBRAHIM23. SEE APPENDIX IF CHECKED717/245–7000 717/245–7000 717/245–7000 717/245–7000 717/245–7000 717/245–7000218

EPDM Part 1: <strong>General</strong> InformationCARLISLE CARLISLE CARLISLE CARLISLE CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX CELOTEXSYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC. CORP. CORP. CORP. CORP. CORP. CORP.SURE-SEAL FR SURE-SEAL SURE-SEAL BRITE-PLY CELO I CELO I CELO I CELO I CELO I CELO IREINFORCED REINFORCED FLEECEBACK FLEECEACK .045 .060 .060 .045 .045 .060EPDM EXTRA EPDM EPDM EPDM REINFORCED REINFORCED REINFORCEDYES YES YES YES NONE NONE NONE POLYESTER POLYESTER POLYESTERBLACK BLACK BLACK WHITE ON BLACK BLACK WHITE ON BLACK WHITE ON BLACKBLACK BLACK BLACK0.30 0.35 0.32 0.32 0.27 0.36 0.36 0.27 0.27 0.36NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XTAPE OR TAPE OR TAPE OR CONTACT CONT ADHES & CONT ADHES & CONT ADHES & CONT ADHES & CONT ADHES & CONT ADHES &CONTACT CONTACT CONTACT ADHESIVE SEALANT OR SEALANT OR SEALANT OR SEALANT OR SEALANT OR SEALANT ORADHESIVE ADHESIVE ADHESIVE SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPE10 10MECH. FAST. MECH. FAST.CONT. ADHES. CONT. ADHES. URETHANE ADHES URETHANE ADHESXXNONE NONE NONE NONE 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"X O X O X O X O X X X XX O X O O O X X X XX O X O X O X O X X X XX X X X X X X XX X X X X X X X X XX O X O O O X X X XX X X X X X X X X XX X X X XX O X O X O X O X X X X X XX O X O X O X O X X XX O X O X O X O X X X XX O X O X O X O X X X X X XX O X O X O X O X O X O X O X O X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE–49 TO 180 –49 TO 180 –49 TO 180 –49 TO 180UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UINCURED UNCURED UINCURED UNCUREDOR OR OR OR EPDM EPDM WHITE EPDM WHITE EPDMCURED EPDM CURED EPDM CURED EPDM CURED EPDM EPDM EPDMADHESIVE ADHESIVE ADHESIVE ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVEOR SELF-FLASH OR SELF-FLASH OR SELF-FLASH OR SELF-FLASH OR SELF-FLASH OR SELF-FLASHTAPE TAPE TAPE TAPE TAPE TAPEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1986 19861986 1986 1985 1985 1965 1965 1965 1965 1965 1965MILLIONS MILLIONS MILLIONS MILLIONSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT70 70 70 70 6 6 6 6 6 6YES YES YES YES YES YES YES YES YES YESC. KUHL C. KUHL C. KUHL C. KUHL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL717/245–7000 717/245–7000 717/245–7000 717/245–7000 OFFICE OFFICE OFFICE OFFICE OFFICE OFFICES. IBRAHIM S. IBRAHIM S. IBRAHIM S. IBRAHIM REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL717/245–7000 717/245–7000 717/245–7000 717/245–7000 OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE219

EPDM Part 1: <strong>General</strong> Information1. COMPANY NAME CELOTEX ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMSCORP.2. PRODUCT NAME CELO I ERSYSTEMS ERSYSTEM ERSYSTEMS ERSYSTEMS ERSYSTEMS.060 FR RUBBER ROOF RUBBER ROOF RUBBER ROOF RUBBER ROOF REINFORCED-90.060 BLACK .045 BLACK .060 BLACK FR .045 BLACK .045 BLACK3. PRODUCT DESCRIPTIONReinforcement NONE NONE NONE NONE NONE WOVENPOLY INSERTColors BLACK BLACK BLACK BLACK BLACK BLACKInstalled Weight (lbs./ft 2 w/o ballast) 0.36 0.35 0.25 0.35 0.25 0.304. COATING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD CONT ADHES & CONTACT CONTACT CONTACT CONTACT CONTACT7. TYPES OF ROOF SYSTEMSSEALANT OR ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVESEAM TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPELoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 MIN 10 MIN 10 MIN 10 MIN 10 MINPartially Adhered (method) PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDED MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED 1/4" DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X O O O O OMineral Fiber X O O O O OPolystyrene X O O O O OCellular Glass X O O O O OPhenolic O O O O OFiberboard X X X X X XPerlite X O O O O OPolyisocyanurate X X X X X XPolyurethane O O O O OGypsum O O O O OConcrete O O O O OWood Plankl X O O O O OPlywood X O O O O OExisting Built-up Membrane X O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 120 0 – 120 0 – 120 0 – 120 0 – 12012. FLASHING MATERIAL UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDWHITE EPDM OR EPDM OR EPDM OR EPDM OR EPDM OREPDM NEOPRENE NEOPRENE NEOPRENE NEOPRENE NEOPRENE13. FLASHING METHOD CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR TAPE OR TAPE OR TAPE OR TAPE OR TAPE14. 14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1965 1965 1965 1965 1965 198917. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 6 14 14 14 14 1420. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: REGIONAL T. LEONARD T. LEONARD T. LEONARD T. LEONARD T. LEONARDOFFICE 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–774722. FOR TECHNICAL INFORMATION, CONTACT: REGIONAL J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD23. SEE APPENDIX IF CHECKEDOFFICE 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747220

EPDM Part 1: <strong>General</strong> InformationERSYSTEMS FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONEBUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSERSYSTEMS RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARDREINFORCED-90 .045 .060 .045 FR .060 FR .090 .045 .060 0.45 LSFR 0.060 LSFR.060 BLACK REINFORCED REINFORCEDWOVEN NONE NONE NONE NONE NONE POLYESTER POLYESTER NONE NONEPOLY INSERTBLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK0.40 0.28 0.38 0.32 0.43 0.64 0.28 0.38 0.28 0.38NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XCONTACT SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPE W/ SEAM TAPE SEAM TAPE SEAM TAPE SEAM TAPEADHESIVEFLASHING STRIPOR TAPEOVERLAY10 MIN 10 MIN 10 MIN 10 MIN 10 MIN 10 MIN 10 MIN 10 10MECH. FAST. BATTENS BATTENS BATTENS BATTENS BATTENS BATTENS BATTENS BATTENSCONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.X X X X X X X X XDEAD LEVEL POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAIN POS. DRAINO X O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X O X OO X X X X X X O X X XOX X X X X X X X X XO X O X O X O X O X O X O X O X O X OX X X X X X X X X XO X X X X X X X X XO X O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X O X OO X O X X O X O X O X O X O X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0–120 0–100 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100UNCURED EPDM / EPDM / EPDM / EPDM / EPDM / EPDM / EPDM / EPDM / EPDMEPDM OR QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAM QUICKSEAMNEOPRENE FLASHING FLASHING FLASHING FLASHING FLASHING FLASHING FLASHING FLASHING FLASHINGCONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE / ADHESIVE /OR TAPE TAPE TAPE TAPE TAPE TAPE TAPE TAPE TAPE TAPEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1990 1990 1990 1990 1994 19941989 1982 1982 1985 1985 1982 1990 1990 1994 1994THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSTHOUSANDS MILLIONS MILLIONS MILLIONS MILLIONS THOUSANDS THOUSANDS THOUSANDS MILLIONS MILLIONSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT14 5 5 5 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YEST. LEONARD 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442 800/428–4442800/403–7747J. LEONARD 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511 800/428–4511800/403–7747X221

EPDM Part 1: <strong>General</strong> Information1. COMPANY NAME GENFLEX GENFLEX GENFLEX GENFLEX GENFLEX INTERNATIONALROOFING ROOFING ROOFING ROOFING ROOFING DIAMONDSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS, INC.2. PRODUCT NAME GENFLEX GENFLEX GENFLEX GENFLEX GENFLEX INTERNATIONAL.045 .060 FRM .045 FRM 0.60 AFR .060 BLACKBLACK BLACK BLACK BLACK BLACK EPDM .0453. PRODUCT DESCRIPTIONReinforcement NONE NONE YES YES NONE NONEColors BLACK BLACK BLACK BLACK BLACK BLACKInstalled Weight (lbs./ft 2 w/o ballast) 0.28 0.38 0.28 0.38 0.38 0.304. COATING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD CONTACT CONTACT TAPE TAPE CONTACT CONTACT7. TYPES OF ROOF SYSTEMSADHESIVE ADHESIVE ADHESIVE ADHESIVEOR TAPE OR TAPE OR TAPE OR TAPELoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10Partially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED LEVEL LEVEL LEVEL LEVEL LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X X X X X XMineral Fiber X X X X X XPolystyrene O O O O O OCellular Glass X X X X X XPhenolicFiberboard X X X X X XPerlite X X X X X OPolyisocyanurate X X X X X XPolyurethane X X X X X XGypsum X X X X X XConcrete O O O O O SWood Plankl O O O O O SPlywood O O O O O XExisting Built-up Membrane O O O O O S10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 100 0 – 100 0 – 100 0 – 100 0 – 100 40 – 12012. FLASHING MATERIAL UNCURED EPDM UNCURED UNCURED UNCURED UNCUREDEPDM EPDM EPDM EPDM EPDM13. FLASHING METHOD CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE14. 14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1982Within USA 1979 1979 1989 1989 1994 198217. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS THOUSANDS THOUSANDS MILLIONS MILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 8 8 8 8 8 4020. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES SALES SALES SALES SALES J. DIAS800/443-4272 800/443-4272 800/443-4272 800/443-4272 800/443-4272 S. HALL22. FOR TECHNICAL INFORMATION, CONTACT: TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE A. HONSBERGER23. SEE APPENDIX IF CHECKED800/443–4272 800/443–4272 800/443–4272 800/443–4272 800/443-4272 419/382–0111222

EPDM Part 1: <strong>General</strong> InformationINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL JOHNS JOHNS JOHNS JOHNS JOHNS JOHNSDIAMOND DIAMOND DIAMOND DIAMOND MANVILLE MANVILLE MANVILLE MANVILLE MANVILLE MANVILLESYSTEMS, INC. SYSTEMS, INC. SYSTEMS, INC. SYSTEMS, INC. INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONALINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL SPM 45 SPM 45R SPM 60 SPM 60R SP 60 FR SPM 60 WBLACK FIRE RETARDANT REINFORCED REINFORCED BLACK BLACK BLACK BLACK BLACK WHITE.060 .060 .045 .060NONE NONE SCRIM SCRIM NONE POLYESTER NONE POLYESTER NONE NONEBLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK WHITE0.40 0.50 0.40 0.50 0.29 0.30 0.38 0.39 0.39 0.41NONE NONE SCRIM SCRIM NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XCONTACT CONTACT CONTACT CONTACT CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVEADHESIVE ADHESIVE ADHESIVE ADHESIVE & SEALANT & SEALANT & SEALANT & SEALANT & SEALANT & SEALANTOR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE10 MIN 10 MIN 10 MIN 10 MINMECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST. MECH. FAST.ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEDEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL NONE NONE NONE NONE NONE NONEX X X X O O O O O OX X X X O O O O O OO O O O O O O O O OX X X X O O O O O OX X X X X X X X X XO O O O X X X O X O X O X OX X X X X X X X X XX X X X X X X X X XX X X X X O X O O O O OS S S S X O X O X O X O X O X OS S S S X O X O X O X O X O X OX X X X X O X O X O X O X O X OS S S S O O O O O ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 – 120 40 – 120 25 – 160 25 – 160 25 – 160 25 – 160 25 – 160 25 – 160UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDEPDM EPDM EPDM EPDM OR OR OR OR OR ORCURED EPDM CURED EPDM CURED EPDM CURED EPDM CURED EPDM CURED EPDMCONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPRYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1982 1982 1982 19821982 1982 1982 1982 1979 1993 1979 1993 1983 1983MILLIONS MILLIONS THOUSANDS THOUSANDS MILLIONS THOUSANDS MILLIONS THOUSANDS MILLIONS MILLIONSDISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT40 40 40 40 5 5 5 5 5 5YES YES YES YES YES YES YES YES YES YESJ. DIAS J. DIAS J. DIAS J. DIAS REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONALS. HALL S. HALL S. HALL S. HALL OFFICE OFFICE OFFICE OFFICE OFFICE OFFICEA. HONSBERGER A. HONSBERGER A. HONSBERGER A. HONSBERGER GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE GUARANTEE419/382–0111 419/382–0111 419/382–0111 419/382–0111 SERVICES SERVICES SERVICES SERVICES SERVICES SERVICES223

EPDM Part 1: <strong>General</strong> Information1. COMPANY NAME MULE-HIDE MULE-HIDE MULE-HIDE MULE-HIDE MULE-HIDE OLYMPICPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS RUBBERCO., INC. CO., INC. CO., INC. CO., INC. CO., INC. RFG. SYSTEMS2. PRODUCT NAME M-H M-H M-H M-H M-H WATERSHIELDEPDM EPDM REINFORCED REINFORCED W/B .060 .045.045 .060 0.45 .060 .0603. PRODUCT DESCRIPTIONReinforcement NONE NONE YES YES NONE NONEColors BLACK BLACK BLACK BLACK WHITE/BLACK BLACKInstalled Weight (lbs./ft 2 w/o ballast) 0.30 0.40 0.30 0.40 0.40 0.264. COATING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD CONT ADHESIVE CONT ADHESIVE CONTACT CONTACT CONTACT CONT ADHESIVE7. TYPES OF ROOF SYSTEMS& SEALANT & SEALANT ADHESIVE ADHESIVE ADHESIVE & SEALANTOR TAPE OR TAPE AND TAPE AND SEALANT AND SEALANT OR SEAM TAPELoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10 MINPartially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X8. MINIMUM SLOPE REQUIRED NONE NONE NONE NONE NONE DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber O O O O OMineral Fiber O O O O OPolystyrene X O X O X O X O O OCellular Glass X O X O X O X O X OPhenolic XFiberboard X X X X X XPerlite X O X O X O X O O X OPolyisocyanurate X X X X X X OPolyurethane X X X X X O X OGypsum X O X O X O X O X O OConcrete X O X O X O X O X O X OWood Plankl X O X O X O X O X O X OPlywood X O X O X O X O X O X OExisting Built-up Membrane O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) –49 – 180 –49 – 180 –49 – 180 –49 – 180 –49 – 180 0 – 11012. FLASHING MATERIAL UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDOR OR OR OR OR EPDMCURED EPDM CURED EPDM CURED EPDM CURED EPDM CURED EPDM13. FLASHING METHOD CONTACT CONTACT CONTACT CONTACT CONTACT CONT ADHESIVEADHESIVE OR ADHESIVE OR ADHESIVE OR ADHESIVE OR ADHESIVE OR SELF-FLASHFLASHING TAPE FLASHING TAPE FLASHING TAPE FLASHING TAPE TAPE14. 14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1986 1986Within USA 1963 1963 1986 1986 1986 198117. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRS,DIRECT19. NUMBER OF REGIONAL LOCATIONS 12 12 12 12 1220. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: L. PUNZEL L. PUNZEL L. PUNZEL L. PUNZEL L. PUNZEL E. GRINWALD608/365–3111 608/365–3111 608/365–3111 608/365–3111 608/365–3111 414/442–311722. FOR TECHNICAL INFORMATION, CONTACT: T. MCFARLAND T. MCFARLAND T. MCFARLAND T. MCFARLAND T. MCFARLAND 800/552–539323. SEE APPENDIX IF CHECKED608/365–3111 608/365–3111 608/365–3111 608/365–3111 608/365–3111224

EPDM Part 1: <strong>General</strong> InformationOLYMPIC OLYMPIC PROTECTIVE PROTECTIVE PROTECTIVE PROTECTIVE PROTECTIVE PROTECTIVE PROTECTIVE PROTECTIVERUBBER RUBBER COATINGS COATINGS, COATINGS, COATINGS, COATINGS, COATINGS, COATINGS, COATINGS,RFG SYSTEMS RFG SYSTEMS INC. INC. INC. INC. INC. INC. INC. INC.WATERGUARD WATERGUARD PRO SHIELD PRO SHIELD PRO SHIELD PRO SHIELD PRO SHIELD PRO SHIELD PRO SHIELD PRO SHIELD.060 MR BLACK BLACK BLACK WHITE WHITE WHITE WHITE WHITE - FIRERETARDANTNONE NONE NONE NONE NONE NONE NONE NONE NONE NONEBLACK BLACK BLACK BLACK BLACK WHITE WHITE WHITE WHITE / FIRE WHITE / FIRERETARDANT RETARDANT0.36 0.36 0.40 0.50 0.60 0.40 0.50 0.60 0.40 0.60NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X XX X X X X X X X X XCONT ADHESIVE CONT ADHESIVE CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT& SEALANT & SEALANT ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVEOR SEAM TAPE OR SEAM TAPE AND SEALANT AND SEALANT AND SEALANT AND SEALANT AND SEALANT AND SEALANT AND SEALANT AND SEALANT10 10 10 10 10 10PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDED PLATE BONDEDCONT. ADHES. CONT. ADHES. CONT. CEMENT CONT. CEMENT CONT. CEMENT CONT. CEMENT CONT. CEMENT CONT. CEMENT CONT. CEMENT CONT. CEMENTX X XDEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVELO X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X OO O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X OX X X O X O X X O X O X O X O X OO X X X X X X X XX X X X X X X X X XX O X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X OO X O X O X O X O X O X O X O X OX O X X O X O X O X O X O X O X O X OX O X O X O X O X O X O X O X O X ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE0 – 110 0 – 110 0 – 120 0 – 120 0 – 120 0 – 160 0 – 160 0 – 160 0 – 160 0 – 160UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDEPDM EPDM EPDM EPDM EPDM EPDM EPDM EPDM EPDM EPDMCONT ADHESIVE CONT ADHESIVE CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTOR SELF-FLASH OR SELF-FLASH ADHESIVE & ADHESIVE & ADHESIVE & ADHESIVE & ADHESIVE & ADHESIVE & ADHESIVE & ADHESIVE &TAPE TAPE SEALANT SEALANT SEALANT SEALANT SEALANT SEALANT SEALANT SEALANTYES YES YES YES YES YES YES YES YES YESMETALMETALUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1982 1982 19821981 1986 1965 1965 1965 1965 1965 1965 1982 1982THOUSANDS THOUSANDS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS MILLIONS 1,000,000 1,000,000DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT10 10 10 10 10 10 10 10YES YES YES YES YES YES YES YES YES YESE. GRINWALD E. GRINWALD SALES SALES SALES SALES SALES SALES SALES SALES414/442–3117 414/442-3117 MANAGER MANAGER MANAGER MANAGER MANAGER MANAGER MANAGER MANAGER800/552–5393 800/552-5393 MURRELL MURRELL MURRELL MURRELL MURRELL MURRELL MURRELL MURRELL225

EPDM Part 1: <strong>General</strong> Information1. COMPANY NAME ROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGPRODUDTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL2. PRODUCT NAME RPE EPDM RPI EPDM RPI EPDM RPI EPDM RPI EPDM RPI EPDMBLACK BLACK BLACK BLACK WHITE WHITE.045 .060 .045 .060 .045 .0603. PRODUCT DESCRIPTIONReinforcement NONE NONE POLYESTER POLYESTER NONE NONEColors BLACK BLACK BLACK BLACK WHITE WHITEInstalled Weight (lbs./ft 2 w/o ballast) 0.28 0.38 0.30 0.404. COATING REQUIRED NONE NONE NONE NONE NONE NONE5. USE INNew <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD CONT ADHESVIE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE7. TYPES OF ROOF SYSTEMS& SEALANT & SEALANT & SEALANT & SEALANT & SEALANT & SEALANTOR TAPE OR TAPE OR TAPE OR TAPE OR TAPE OR TAPELoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10 10Partially Adhered (method) BATTEN BATTEN PLATES PLATES BATTEN BATTENFully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X X X8. MINIMUM SLOPE REQUIRED LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber O O O O O OMineral Fiber O O O O O OPolystyrene O O O O O OCellular Glass O O O O O OPhenolic O O O O O OFiberboard X X X X X XPerlite O O O O O OPolyisocyanurate X O X O X O X O X O X OPolyurethane O O O O O OGypsum X O X O X O X O X O X OConcrete X O X O X O X O X O X OWood Plankl O O O O O OPlywood X O X O X O X O X O X OExisting Built-up Membrane S O S O S O S O S O S O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 & ABOVE 40 & ABOVE 40 & ABOVE 40 & ABOVE 40 & ABOVE 40 & ABOVE12. FLASHING MATERIAL UNCURED UNCURED UNCURED UNCURED UNCURED UNCUREDEPDM EPDM EPDM EPDM EPDM EPDM13. FLASHING METHOD CONTACT CONTACT CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE14. 14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1965 1965 1965 1965 1965 196517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 75 75 75 75 75 7520. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: 800/628–2957 800/628–2957 800/628–2957 800/628–2957 800/628–2957 800/628–295722. FOR TECHNICAL INFORMATION, CONTACT: 800/628–2957 800/628–2957 800/628–2957 800/628–2957 800/628–2957 800/628–295723. SEE APPENDIX IF CHECKED226

EPDM Part 1: <strong>General</strong> InformationROOFING ROOFING VERSICO VERSICO VERSICO VERSICO VERSICO VERSICO VERSICO VERSICOPRODUCTS PRODUCTS INC. INC. INC. INC. INC. INC. INC. INC.INTERNATIONAL INTERNATIONALRPI EPDM FR RPI EPDM FR VERSIGARD VERSIGARD VERSIGARD VERSIGARD PE VERSIGARD II VERSIGARD VERSIGARD II VERSIGARD IBLACK BLACK EPDM EPDM EPDM EPDM FR REINFORCED FR.045 .060 .045 .050 .060 .050 EPDM .060 EPDM .045 REINFORCED WHITENONE NONE NONE NONE NONE NONE NONE YES YES NONEBLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK WHITE ONBLACK0.30 0.40 0.28 0.31 0.38 0.31 0.40 0.30 0.30 0.40NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X XX X X X X X X X X XCONT ADHESIVE CONT ADHESIVE CONTACT CONTACT CONTACT METAL CONTACT CONTACT CONT ADHESIVE CONT ADHESIVE& SEALANT & SEALANT ADHESIVE OR ADHESIVE ADHESIVE RAIL ADHESIVE ADHESIVE & SEALANT & SEALANTOR TAPE OR TAPE TAPE OR TAPE OR TAPE ASSEMBLY OR TAPE OR TAPE OR TAPE10 10 10 – 15 10 – 15 10 – 15 10 – 15 10 – 15 10 – 15BATTEN BATTEN BATTENS BATTENS BATTENS METAL RAIL ASSY. MECH. FAST. MECH. FAST.CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.X X X X X XLEVEL LEVEL NONE NONE NONE 1/2" IN 12" NONE NONE NONE 1/8"O O X X O O O X O X O X OO O X X O O O X O X O X OO O X X O O O O O OO O X X O X X X O X O XO O OX X X X X X X X X XO O O O O O O O X O OX O X O X X X X X X X XOOX O X O S S O O S O S O OX O X O S O X O X O X O X O X OO O S O O O O O OX O X O S X X O X O X O X O X OS O S O S X S X O X S X S ONONE NONE NONE NONE NONE NONE NONE NONE NONE NONE40 & ABOVE 40 & ABOVE –25 – 180 –25 – 180 –25 – 180 –25 – 180 –25 – 180 –25 – 180 –25 – 180 –25 – 180UNCURED UNCURED EPDM EPDM EPDM GALVALUME EPDM EPDM EPDM EPDMEPDM EPDM UNCURED EPDM UNCURED EPDM UNCURED EPDM UNCURED EPDM UNCURED EPDM UNCURED EPDM UNCURED EPDMMETAL METAL METAL METAL METAL METAL METALCONTACT CONTACT CONTACT CONTACT CONTACT METAL RAIL CONTACT CONTACT CONTACT CONTACTADHESIVE ADHESIVE ADHESIVE OR ADHESIVE OR ADHESIVE OR ASSEMBLY ADHESIVE ADHESIVE ADHESIVE ADHESIVETAPE TAPE TAPE OR TAPE OR TAPE OR TAPE OR TAPEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA1982 1986 1982 19771965 1965 1965 1986 1965 1986 1983 1986 1986 1977THOUSANDS THOUSANDS MILLIONS MILLIONS MILLIONS THOUSANDS THOUSANDS MILLIONS THOUSANDS THOUSANDSDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS75 75 150 150 150 150 150 150 150 150YES YES YES YES YES YES YES YES YES YES800/628–2957 800/628–2957 M. MCAULEY M. MCAULEY M. MCAULEY M. MCAULEY M. MCAULEY M. MCAULEY M. MCAULEY M. MCAULEY800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663800/628–2957 800/628–2957 R. GIANGIULI R. GIANGIULI R. GIANGIULI R. GIANGIULI R. GIANGIULI R. GIANGIULI R. GIANGIULI R. GIANGIULI800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663 800/992–7663227

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-961. COMPANY NAME CARLISLE CARLISLE CARLISLE CARLISLE CARLISLE CARLISLESYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC. SYNTEC INC.2. PRODUCT NAME SURE-SEAL SURE-SEAL SURE-SEAL SURE-SEAL BRITE-PLY SURE-SEALEPDM FR FR HTM REINFORCEDEPDM PLUS EPDM EPDM EPDM3. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U U U U UCLASS SR (scrim or fabric internally reinforced)SR5. THICKNESS (min. in.)Sheet Overall 0.039 0.045 0.060 0.060 0.045 0.060 0.045Coating Over Scrim Class SR 0.015 NA NA NA NA NA 0.0156. BREAKING STRENGTH (min. lbf) CLASS SR 90 NA NA NA NA NA 1807. TENSILE STRENGTH (min. psi) CLASS U 1305 1630 1630 1830 2000 1685 NA8. ELONGATION, ULTIMATE (min. %)CLASS U 300 520 520 580 500 550 NACLASS SR 250 NA NA NA NA NA 5009. TENSILE SET (max. %) CLASS U 10 5 5 5 5 7 NA10. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 230 230 230 200 200 NA11. TEARING STRENGTH (min. lbf) CLASS SR 5 NA NA NA NA NA 3012. BRITTLENESS POINT (max. F) –49 –85 –85 –85 -85 -75 –7513. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 NA NA NA NA NA 175Tensile Strength (min. psi) CLASS U 1205 1500 1500 1860 2100 1550 NAElongation, Ultimate (min. %) 200 310 310 250 250 250 250Tear Resistance (min. lbf/in.) CLASS U 125 215 215 240 215 185 NALinear Dimensional Change (max. %) ± 2 –0.4 –0.4 –0.6 -0.4 -0.5 –0.715. WATER ABSORPTION (max. mass %) +8, –2 +2.0 +2.0 +2.0 +2.0 +3.6 +2.016. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet17. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDfailure X X X X NA NAor crazing PASS PASS PASS PASS PASS PASS1. COMPANY NAME CARLISLE CARLISLE CARLISLE CARLISLE CELOTEX CELOTEXSYNTEC, INC. SYNTEC, INC. SYNTEC, INC. SYNTEC, INC. CORP. CORP.2. PRODUCT NAME SURE-SEAL FR SURE-SEAL SURE-SEAL BRITE-PLY CELO I CELO IREINFORCED REINFORCED FLEECEBBACK FLEECEBACK .045 .060EPDM EXTRA EPDM EPDM EPDM3. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U UCLASS SR (scrim or fabric internally reinforced) SR SR FR FR5. THICKNESS (min. in.)Sheet Overall 0.039 0.045 0.066 0.100, 0.115 0.100, 0.115Coating Over Scrim Class SR 0.015 0.015 0.020 0.045 0.0456. BREAKING STRENGTH (min. lbf) CLASS SR 90 180 230 200 200 NA NA7. TENSILE STRENGTH (min. psi) CLASS U 1305 NA NA NA NA 1500 15008. ELONGATION, ULTIMATE (min. %)CLASS U 300 NA NA NA NA 350 350CLASS SR 250 500 500 520 520 NA NA9. TENSILE SET (max. %) CLASS U 10 NA NA NA NA 10 1010. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 NA NA NA NA 175 17511. TEARING STRENGTH (min. lbf) CLASS SR 5 30 60 45 45 NA NA12. BRITTLENESS POINT (max. F) –49 –75 –75 –75 –75 –75 –7513. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 175 220 200 200 NA NATensile Strength (min. psi) CLASS U 1205 NA NA NA NA 1450 1450Elongation, Ultimate (min. %) 200 250 250 310 250 225 225Tear Resistance (min. lbf/in.) CLASS U 125 NA NA NA NA 150 150Linear Dimensional Change (max. %) ± 2 –0.7 –0.7 –0.7 –0.7 –0.3 –0.315. WATER ABSORPTION (max. mass %) +8, –2 +2.0 +2.0 +2.0 +2.0 ±1.0 ±1.016. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet17. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDNA=not applicablefailure NA NA NA NA NA NAor crazing PASS PASS PASS PASS NA NA228

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-96CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMSCORP. CORP. CORP. CORP. CORP.CELO I CELO I CELO I CELO I CELO I ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS.060 .045 .045 .060 .060 FR RUBBER ROOF RUBBER ROOF RUBBER ROOF RUBBER ROOF REINFORCED 90REINFOFCED REINFORCED REINFORCED .060 BLACK .045 .060 BLACK FR .045 BLACK FR .045 BLACK1 1 1 1 1U SR SR SR U U U U USR0.055 0.040 0.055 0.040 0.045NA NA NA NA 0.015NA 100 100 100 NA NA NA NA NA 1001500 NA NA NA 1500 1305 1305 1305 1305 NA350 NA NA NA 350 300 300 300 300 NANA 400 400 400 NA NA NA NA NA 40010 NA NA NA 10 10 10 10 10 NA175 NA NA NA 175 150 150 150 150 NANA 35 35 35 NA NA NA NA NA 200–75 –75 –75 –75 –75 –49 –49 –49 –49 –75PASS PASS PASS PASS PASS PASS PASS PASS PASS PASSNA 90 90 90 NA NA NA NA NA 901450 NA NA NA 1450 1205 1205 1205 1205 NA225 250 250 250 225 200 200 200 200 250150 NA NA NA 150 125 125 125 125 NA–0.3 –0.3 –0.3 –0.3 –0.3 ±2 ±2 ±2 ±2 +1.0±1.0 ±1.0 ±1.0 ±1.0 ±1.0 +8, –2 +8, –2 +8, –2 +8, –2 +1.0NA 55 55 55 NA X X X X 50NA NA NA NA NA PASS PASS PASS PASS PASSERSYSTEMS FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONE FIRESTONEBUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDING BUILDINGPRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS CO PRODUCTS COERSYSTEMS RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGARD RUBBERGRARD RUBBERGARDREINFORCED 90 .045 .060 .045 FR .060 FR .090 .045 .060 .045 LSFR .060 LSFR.060 BLACK REINFORCED REINFORCED1 1 1 1 1 1 1 1 1 1U U U U U U USR SR SR0.060 0.045 0.060 0.045 0.060 0.090 0.045 0.060 0.045 0.045NA NA NA NA NA NA 0.015 0.015 NA NANA NA NA NA NA 90 90 NA NANA 1305 1305 1305 1305 1305 NA NA 1305 1305NA 300 300 300 300 300 NA NA 300 300400 NA NA NA NA NA 250 250 NA NANA 10 10 10 10 10 NA NA 10 10NA 150 150 150 150 150 NA NA 150 150200 NA NA NA NA NA 10 5 NA NA–75 –49 –49 –49 –49 –49 –49 –49 –49 –49PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS90 NA NA NA NA NA 80 80 NA NANA 1205 1205 1205 1205 1205 NA NA 1205 1205250 200 200 200 200 200 200 200 200 200NA 125 125 125 125 125 NA NA 125 125+1.0 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1+1.0 +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –250 X X X X X X X X XPASS PASS PASS PASS PASS PASS PASS PASS PASS PASS229

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-961. COMPANY NAME GENFLEX GENFLEX GENFLEX GENFLEX GENFLEX INTERNATIONALROOFING ROOFING ROOFING ROOFING ROOFING DIAMONSSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS, INC.2. PRODUCT NAME GENFLEX GENFLEX GENFLEX GENFLEX GENFLEX INTERNATIONAL.045 .060 FRM 0.45 FRM .060 AFR BLACKBLACK BLACK BLACK BLACK .060 BLACK EPDM .0453. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U U U UCLASS SR (scrim or fabric internally reinforced) SR SR5. THICKNESS (min. in.)Sheet Overall 0.039 0.043 0.058 0.043 0.058 0.058 0.045Coating Over Scrim Class SR 0.015 NA NA 0.015 0.015 NA NA6. BREAKING STRENGTH (min. lbf) CLASS SR 90 NA NA 90 90 NA NA7. TENSILE STRENGTH (min. psi) CLASS U 1305 1305 1500 NA NA 1305 13058. ELONGATION, ULTIMATE (min. %)CLASS U 300 300 450 NA NA 300 300CLASS SR 250 NA NA 300 300 NA NA9. TENSILE SET (max. %) CLASS U 10 10 10 NA NA 10 510. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 150 150 NA NA 150 15011. TEARING STRENGTH (min. lbf) CLASS SR 5 NA NA 50 50 NA NA12. BRITTLENESS POINT (max. F) –49 –49 –49 –49 –49 –49 –4913. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 NA NA 80 80 NA NATensile Strength (min. psi) CLASS U 1205 1500 1500 NA NA 1500 1305Elongation, Ultimate (min. %) 200 225 225 200 200 225 300Tear Resistance (min. lbf/in.) CLASS U 125 230 230 NA NA 230 150Linear Dimensional Change (max. %) ± 2 +1.0 +1.0 +1.0 +1.0 +1.0 +215. WATER ABSORPTION (max. mass %) +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –2 +8, –216. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet 3017. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDfailure X X X X Xor crazing PASS PASS PASS PASS PASS PASS1. COMPANY NAME INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL JOHNS JOHNSDIAMOND DIAMOND DIAMOND DIAMOND MANVILLE MANVILLESYSTEMS, INC. SYSTEMS, INC. SYSTEMS, INC. SYSTEMS, INC. INTERNATIONAL INTERNATIONAL2. PRODUCT NAME INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL SPM 45 SPM 45 RBLACK FIRE RETARDANT REINFORCED REINFORCED BLACK BLACK0.06 0.06 0.045 0.063. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U U SR SR U SRCLASS SR (scrim or fabric internally reinforced)5. THICKNESS (min. in.)Sheet Overall 0.039 0.060 0.060 0.040 0.0\58 0.043 0.040Coating Over Scrim Class SR 0.015 NA NA 0.015 0.015 NA 0.0156. BREAKING STRENGTH (min. lbf) CLASS SR 90 NA NA 90 90 NA 907. TENSILE STRENGTH (min. psi) CLASS U 1305 1305 1305 NA NA 1650 NA8. ELONGATION, ULTIMATE (min. %)CLASS U 300 300 300 NA NA 450 NACLASS SR 250 NA NA 250 250 NA 2509. TENSILE SET (max. %) CLASS U 10 5 5 NA NA 4 NA10. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 150 150 NA NA 200 NA11. TEARING STRENGTH (min. lbf) CLASS SR 5 NA NA 10 10 NA 1012. BRITTLENESS POINT (max. F) –49 –49 –49 -49 -49 –72 –4913. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 NA NA 80 80 NA 80Tensile Strength (min. psi) CLASS U 1205 1305 1305 NA NA 1650 NAElongation, Ultimate (min. %) 200 300 300 200 200 320 200Tear Resistance (min. lbf/in.) CLASS U 125 150 150 NA NA 182 NALinear Dimensional Change (max. %) ± 2 +2 +2 ±2 ±2 –0.50 ± 215. WATER ABSORPTION (max. mass %) +8, –2 +8, –2 +8, –2 +8, -2 +8, -2 +1.7 +4.016. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet 30 3017. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDNA=not applicablefailure X X X Xor crazing PASS PASS PASS PASS PASS PASS230

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-96JOHNS JOHNS JOHNS JOHNS MULE-HIDE MULE-HIDE MULE-HIDE MULE-HIDE MULE-HIDE OLYMPICMANVILLE MANVILLE MANVILLE MANVILLE PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS RUBBERINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL CO., INC. CO., INC. CO., INC. CO., INC. CO., INC. RFG SYSTEMSSPM 60 SPM 60 R SP 60 FR SPM 60W M-H M-H M-H M-H M-H WATERSHIELDBLACK BLACK BLACK WHITE EPDM 0.45 EPDM .060 REINFORCED REINFORCED W/B .045EPDM .045 EPDM .060 EPDM .060 0.061 1 1 1 1 1 1 1 1 1U SR U U U U U USR SR0.058 0.058 0.058 0.058 0.045 0.060 0.045 0.060 0.060 0.045NA 0.025 NA NA NA NA NA NA NA NANA 90 NA NA NA NA 210 210 NA NA1485 NA 1470 1440 1405+ 1405+ NA NA 1405+ 1305470 NA 425 635 350+ 350+ NA NA 350+ 300NA 250 NA NA NA NA 250+ 250+ NA NA4 NA 3 2 10 10 NA NA 10

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-961. COMPANY NAME ROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL2. PRODUCT NAME RPI RPI RPI RPI RPI RPIEPDM EPDM EPDM EPDM EPDM EPDMBLACK .045 BLACK .060 BLACK .045 BLACK .060 WHITE .045 WHITE .0603. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U U R R U UCLASS SR (scrim or fabric internally reinforced)5. THICKNESS (min. in.)Sheet Overall 0.039 0.040 0.054 0.040 0.054Coating Over Scrim Class SR 0.015 NA NA NA NA6. BREAKING STRENGTH (min. lbf) CLASS SR 90 NA NA NA NA7. TENSILE STRENGTH (min. psi) CLASS U 1305 1305 1305 1305 13058. ELONGATION, ULTIMATE (min. %)CLASS U 300 300 300 300 300CLASS SR 250 NA NA NA NA9. TENSILE SET (max. %) CLASS U 1010. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 150 150 125 12511. TEARING STRENGTH (min. lbf) CLASS SR 5 NA NA NA NA12. BRITTLENESS POINT (max. F) –49 –49 –49 –49 –4913. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 NA NA NA NATensile Strength (min. psi) CLASS U 1205 1205 1205 1205 1205Elongation, Ultimate (min. %) 200 200 200 200 200Tear Resistance (min. lbf/in.) CLASS U 125 125 125 125 125Linear Dimensional Change (max. %) ± 2 –2 –2 –2 –215. WATER ABSORPTION (max. mass %) +8, –2 0.05 0.05 0.05 0.0516. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet17. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDfailure X X X Xor crazing PASS PASS PASS PASS1. COMPANY NAME ROOFING ROOFING VERSICO, VERSICO, VERSICO, VERSICO,PRODUCTS PRODUCTS INC. INC. INC. INC.INTERNATIONALINTERNATIONAL2. PRODUCT NAME RPI RPI VERSIGARD VERSIGARD VERSIGARD VERSIGARD PEEPDM FR EPDM FR EPDM EPDM EPDM EPDMBLACK 0.045 BLACK 0.060 .045 .050 .060 .0503. GRADE 1 (greater than 95% principal polymer) or 1 1 1 1 1 1GRADE 2 (50% to 95% principal polymer)4. CLASS U (unreinforced) or U U U U U UCLASS SR (scrim or fabric internally reinforced)5. THICKNESS (min. in.)Sheet Overall 0.039 0.040 0.054 0.040 0.045 0.054 0.045Coating Over Scrim Class SR 0.015 NA NA NA NA NA NA6. BREAKING STRENGTH (min. lbf) CLASS SR 90 NA NA NA NA NA NA7. TENSILE STRENGTH (min. psi) CLASS U 1305 1305 1305 1305 1305 1305 13058. ELONGATION, ULTIMATE (min. %)CLASS U 300 300 300 300 300 300 300CLASS SR 250 NA NA NA NA NA NA9. TENSILE SET (max. %) CLASS U 10 10 10 10 1010. TEAR RESISTANCE (min. lbf/in.) CLASS U 150 150 150 150 150 150 15011. TEARING STRENGTH (min. lbf) CLASS SR 5 NA NA NA NA NA NA12. BRITTLENESS POINT (max. F) –49 –49 –49 -75 -75 -75 -7513. OZONE RESISTANCE (pass/fail) no cracks PASS PASS PASS PASS PASS PASS14. HEAT AGINGBreaking Strength (min. lbf) CLASS SR 80 NA NA NA NA NA NATensile Strength (min. psi) CLASS U 1205 1205 1205 1205 1205 1205 1205Elongation, Ultimate (min. %) 200 200 200 200 200 200 200Tear Resistance (min. lbf/in.) CLASS U 125 125 125 125 125 125 125Linear Dimensional Change (max. %) ± 2 –2 –2 ± 2 ± 2 ± 2 ± 215. WATER ABSORPTION (max. mass %) +8, –2 0.05 0.05 +8, -2 +8, -2 +8, -2 +8, -216. FACTORY SEAM STRENGTH (min. lbf/in.) 51 or sheet17. WEATHER RESISTANCE (pass/fail) no cracks18. SEE APPENDIX IF CHECKEDNA=not applicablefailure X X X X X Xor crazing PASS PASS PASS PASS PASS PASS232

EPDM Part 2: Test ResultsTest description and suggested values as specified in ASTM D 4637-96VERSICO, VERSICO, VERSICO, VERSICO,INC. INC. INC. INC.VERSIGARD II VERSIGARD VERSIGARD II VERSIGARD1 1 1 1USRSRU0.054 0.045 0.045 0.054NA 0.015 0.015 NANA 210 210 NA1780 NA NA 1305495 NA NA 300NA 290 290 NA0.10 NA NA 10215 NA NA 150NA 50 50 NA-85 –75 –75 –75PASS PASS PASS PASSNA 220 220 NA1205 NA NA 1200200 200 200 200125 NA NA 125± 2 –0.7 –0.7 +–2+8, -2 +4.0 +4.0 +4X X X XPASS PASS PASS PASS233

CSPE (Hypalon) Part 1: <strong>General</strong> Information1. COMPANY NAME BURKE BURKE BURKE CONKLIN MULE-HIDE STEVENSINDUSTRIES INDUSTRIES INDUSTRIES CO., INC. PRODUCTS ROOFINGCO., INC. SYSTEMS2. PRODUCT NAME BURKELINE BURKELINE BURKELINE HY-CROWN M-H STEVENSM-358 MF M-358 FA M-350 VAC Q 45 MILS HYPALON HYPALON0.045 0.0453. PRODUCT DESCRIPTIONReinforcement POLYESTER POLYESTER POLYESTER POLYESTER 10 X 10 10 X 10POLYESTERPOLYESTERColor VARIOUS VARIOUS VARIOUS VARIOUS WHITE WHITEInstalled Weight (lbs./ft 2 w/o ballast) 0.32 0.32 0.32 0.32 0.29 MIN 0.29 MIN4. COATING REQUIRED NONE NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD SOLVENT, SOLVENT, SOLVENT, WELD SOLUTION HEAT WELD HEAT WELD7. TYPES OF ROOF SYSTEMSHEAT OR HEAT OR HEAT OR ORWELD SOLUTION WELD SOLUTION WELD SOLUTIONHEAT WELDLoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10 10Partially Adhered (method) MECH. FAST. LOOSE LAID MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered (method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED DEAD LEVEL DEAD LEVEL DEAD LEVEL POS DRAIN NONE NONE9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some/all circumstances)Glass Fiber X X X X XMineral Fiber X O X X X XPolystyrene S O S S X S O X OCellular Glass X X X X X X OPhenolic X X X X X OFiberboard X X X X X X OPerlite X O X X X X OPolyisocyanurate X X X X X XPolyurethane X X X X X XGypsum X X O X X X XConcrete O X X O X XWood Plank S X O X X O X XPlywood S X X X O X XExisting Built-Up Membrane O O X O O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) –40 – 140 –40 – 140 –40 – 140 –25 – 140 –25 – 140 –25 – 14012. FLASHING MATERIAL REINFORCED & REINFORCED & REINFORCED & REINFORCED & REINFORCED & REINFORCED &UNREINFORCED UNREINFORCED UNREINFORCED UNREINFORCED UNREINFORCED UNREINFORCEDCLAD METAL CLAD METAL CLAD METAL CLAD METAL HYPALON HYPALON13. FLASHING METHOD CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONT ADHESIVE CONTACT CONTACT& SOLUTION & SOLUTION & SOLUTION & SOLUTION ADHESIVE & ADHESIVEOR HEAT WELD OR HEAT WELD OR HEAT WELD OR HEAT WELD HEAT WELD & HEAT WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1982 1982 1986 1977Within USA 1976 1976 1986 1985 1978 197817. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAMILLIONSWithin USA MILLIONS MILLIONS >100,000 >2,000,000 MILLIONS MILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 54 54 54 5 12 20020. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: B. ROADES B. ROADES B. ROADES BLDG. PRODS. L. PUNZEL B. ABBOTT800/888-8838 608/365–3111 R. DUCLOS22. FOR TECHNICAL INFORMATION, CONTACT: B. ROADES B. ROADES B. ROADES PROD. SERVS. T. MCFARLAND TECH. DEPT.23. SEE APPENDIX IF CHECKED800/669–7010 800/669–7010 800/669–7010 800/888-8838 608/365–3111 800/621–ROOF234

CSPE (Hypalon) Part 1: <strong>General</strong> InformationSTEVENS TREMCOROOFING INC.SYSTEMSSTEVENS TREMCOHYPALON HP 45100.0610 X 10 10 X 10 WOVENPOLYESTER P[OLYESTERWHITE WHITE/BLACK0.43 MINNONENONEXXHEAT WELDXXCONTACTADHESIVEOR HEAT WELD10 10MECH. FAST. MECH. FAST.CONT. ADHES. CONT. ADHES.XXNONE 1/4"XXXX O OX O OX OX O XX O OXXXXXOXOXOXOX O ONONENONE–25 – 140REINFORCED & REINFORCEDUNREINFORCED HYPALONHYPALONCONTACT CONTACTADHESIVE ADHESIVE& HEAT WELD & HEAT WELDYESYESUSAUSAUSAUSA19771978 1981THOUSANDSDISTRIBUTORS DIRECT200 18YESYESB. ABBOTT SALES OFFICER. DUCLOSTECH. DEPT. TECH. DEPT.800/621–ROOF235

CSPE (Hypalon) Part 2: Test Resultssuggested values as specified in ASTM D 5019-96Test description and1. COMPANY NAME BURKE BURKE BURKE CONKLIN MULE-HIDEINDUSTRIES INDUSTRIES INDUSTRIES CO., INC. PRODUCTSCO., INC.2. PRODUCT NAME BURKELINE BURKELINE BURKELINE HY-CROWN M-HM-358 M-358 M-358 45 MILS HYPALONMF FA VAC Q 0.0453. SHEET CONSTRUCTIONGrade 1 (backed without fibers)Grade 2 (internally reinforced with fabric) 2 2 2 2 2PHYSICAL PROPERTIES OF SHEET4. THICKNESS (min. in.) 0.036 0.045 0.045 0.045 0.045 0.0455. BREAKING STRENGTH (min. lbf)Grade 1 50 NA NA NA NA NAGrade 2 (fabric) 125 225 225 225 225 2256. ELONGATION (min. %)Grade 1 250 NA NA NA NA NAGrade 2 (fabric) 15 81 81 81 81 157. TEARING STRENGTH (min. lbf)Grade 1 10 NA NA NA NA NAGrade 2 (fabric) 25 90 90 90 90 908. LOW-TEMPERATURE BEND pass PASS PASS PASS PASS PASS9. LINEAR DIMENSIONAL CHANGE (max. %)Grade 1 1.0 NA NA NA NA NAGrade 2 (fabric) 2.0 1.0 1.0 1.0 1.0 2.010. FABRIC ADHESION (min. lbf/in. width)Grade 1 A* NA NA NA NA NA11. PLY ADHESION (min. lbf/in.)Grade 2 6 10 10 10 10 1012. HYDROSTATIC RESISTANCE (min. psi)Grade 1 15 NA NA NA NA NAGrade 2 160 300 300 300 300 30013. OZONE RESISTANCE OF SHEET (no cracks) pass PASS PASS PASS PASS PASS14. WEATHER RESISTANCE (no cracks or crazing) pass PASS PASS PASS PASS PASSPHYSICAL PROPERTIES OF THE COATINGPORTION OF THE WEATHER SIDE OF SHEET13. TENSILE STRENGTH (min. psi) 700 1000 1000 1000 1000 100014. ELONGATION (min. %) 300 400 400 400 400 30015. TEAR RESISTANCE (min. lbf/in.) 150 320 320 320 320 15016. OZONE RESISTANCE (no cracks) pass PASS PASS PASS PASS PASS17. WATER ABSORPTION (max. mass %) 10 8 8 8 8 1018. SEE APPENDIX IF CHECKEDNA=not applicableA=internal delamination of backing occurs prior tofailure to bond between backing and coating236

CSPE (Hypalon) Part 2: Test Resultssuggested values as specified in ASTM D 5019-96Test description andSTEVENS STEVENS TREMCOROOFING ROOFING INC.SYSTEMS SYSTEMSSTEVENS STEVENS HP 4510HYPALON HYPALON0.045 0.062 2 20.0405 .054 0.045NA NA NA280 280 225NA NA NA15 15 25NA NA NA110 110 225PASS PASS PASSNA NA NA.1 .1 0.1NA NA NA10 10 10NA NA NA400 400 300PASS PASS PASSPASS PASS PASS1000 1000300 300150 150PASS PASS10 10237

PIB (Polyisobutylene ) Part 1: <strong>General</strong> Information1. COMPANY NAME REPUBLIC TREMCOPOWDERED INC.METALS2. PRODUCT NAME REPUBLIC SINGLE- TREMFASTPLY SYSTEMS:GEOFLEX3. PRODUCT DESCRPTIONReinforcement POLYESTER POLYESTERColor(s) WHITE WHITEInstalled Weight(lbs./ft 2 w/o ballast) 0.574. COATING REQUIRED NONE NONE5. USE IN:New <strong>Roofing</strong> X XReroofing X X6. FIELD LAP JOINT METHOD PEEL & SELF-STICK ADHESIVE7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted (ballast: lbs./ft 2 ) 10Partially Adhered (method)ASPH OR ADHESHOT OR COLDFully Adhered (method) ADHESIVE COLD ADHS.Protected Roof Membrane Assembly X X8. MINIMUM SLOPE REQUIRED POS DRAIN POS DRAIN9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X XMineral Fiber X XPolystyrene OCellular Glass X XPhenolicXFiberboard X XPerlite X OPolyisocyanurate X O XPolyurethane O XGypsum X O OConcrete X O OWood Plank X O OPlywood X O OExisting Built-up Membrane X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 40 – 100 20 – 10012. FLASHING MATERIAL REINFORCED REINFORCEDAND ANDUNREINFOCED PIB UNREINFORCED PIB13. FLASHING METHOD SELF-SEAL SELF-SEALAND ANDCONTACT ADHESIVE CONTACT ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES15. COUNTRY OF:Origin GERMANY GERMANYManufacture USA USA16. YEAR OF FIRST COMMERCIAL USEOutrside USA 1950 1950Within USA 197717. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outrside USAMILLIONSWithin USATHOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 6 1820. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES21. FOR SALES INFORMATION, CONTACT: 800/551-7081 SALES OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: 800/551-7081 TECH. DEPT.23. SEE APPENDIX IF CHECKED238

PIB (Polyisobutylene ) Part 2: Test ResultsTest description and suggested values as specified in ASTM D 5019-961. COMPANY NAME REPUBLIC TREMCOPOWDERED INC.METALS2. PRODUCT NAME REPUBLIC SINGLE- TREMFASTPLY SYSTEMSGEOFLEXPHYSICAL PROPERTIES OF SHEET3. THICKNESS (min. in.) 0.087 0.100 0.1204. BREAKING STRENGTH (min. lbf) 140 175 1755. ELONGATION (min. %) 50 60 606. TEARING STRENGTH (min. lbf) 30 30 307. LOW TEMPERATURE BEND pass PASS PASS8. LINEAR DIMENSIONAL CHANGE (max. %) 1.0 0.5 0.59. FABRIC ADHESION (min. lbf/in.) 7 12 1210. HYDROSTATIC RESISTANCE (min. psi) 175 200 20011. OZONE RESISTANCE (no cracks) pass PASS PASS12. WEATHER RESISTANCE (no cracks or crazing) pass PASS PASSPHYSICAL PROPERTIES OF THTE COATINGPORTION ON THE WEATHER SIDE OF SHEET13. TENSILE STRENGTH (min. psi) 600 70014. ELONGATION (min. %) 400 40015. TEAR RESISTANCE (min. lbf/in.) 100 10016. OZONE RESISTANCE (no cracks) pass PASS17. WATER ABSORPTION (max. mass %) 1.0 1.018. SEE APPENDIX IF CHECKEDNA=not applicable239

TPO Part 1: <strong>General</strong> Information1. COMPANY NAME FIRESTONE FIRESTONE GAF GAF GENFLEXBUILDING BUILDING MATERIALS MATERIALS ROOFINGPRODUCTS PRODUCTS CORP. CORP. SYSTEMS2. PRODUCT NAME ULTRA PLY ULTRA PLY EVERGUARD EVERGUARD .045 TPO45 MIL 60 MIL TPOSR-45 TPOSR-603. PRODUCT DESCRIPTIONReinforcement POLY/SCRIM POLY/SCRIM POLYESTER POLYESTER POLYESTERColor(s) WHITE WHITE WHITE / WHITE / WHITE/BLACK/BLACK BLACK GRAYInstalled Weight (lbs./ft 2 w/o ballast) 0.25 0.35 0.29 0.38 0.214. COATING REQUIRED NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X XReroofing X X X X X6. FIELD LAP JOINT METHOD HEAT WELD HEAT WELD HOT AIR WELD HOT AIR WELD HOT AIR WELD7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted (ballast: lbs./ft 2 ) 10 10 10 10 10 - 15Partially Adhered (method) MECH FAST MECH FAST MECH FAST MECH FAST MECH FASTFully Adhered (method) ADHESIVE ADHESIVE ADHESIVE ADHESIVE CONT ADHESProtected Roof Membrane Assembly N/A N/A X X X8. MINIMUM SLOPE REQUIRED 1/4" 1/4" PER CODE PER CODE LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber O O OMineral Fiber O O XPolystyrene X X X X OCellular Glass X X XPhenolicFiberboard X X X X XPerlite O O XPolyisocyanurate X X X X XPolyurethane O O X X XGypsum X X X O X O XConcrete X X X O X O OWood Plank X X X O X O OPlywood X X X O X O OExisting Built-Up Membrane O O X O X O O10. RESTRICTED REGIONS (refer to manufacturer's literature) N/A N/A NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 - 150 0 - 150 0 - 120 0 - 120 0 - 14012. FLASHING MATERIAL REINFORCED REINFORCED MEMBRANEMEMBRANE MEMBRANE OR COATEDCOATED METAL COATED METAL METAL13. FLASHING METHOD HEAT WELD HEAT WELD HOT AIR HOT AIR CONT ADHESOR TAPE OR TAPE WELD OR WELD OR OR HOT AIRADHESIVE ADHESIVE WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES15. YEAR OF FIRST COMMERCIAL USEOutside USA 1978 1978Within USA 1998 1998 1998 1998 199516. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS17. MANUFACTURING PLANT LOCATION(S) (City, State) HENDERSON, NV HENDERSON, NV HENDERSON, NV HENDERSON, NV JEANNETTE, PA18. METHODS OF DISTRIBUTION (distributors and/or direct) DIST/DIRECT DIST/DIRECT DIST/DIRECT DIST/DIRECT DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 4 4 820. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: PAUL OLIVERA PAUL OLIVERA REGIONAL REGIONAL 800/443-4272317/575-7186 317/575-7186 OFFICE OFFICE22. FOR TECHNICAL INFORMATION, CONTACT: JEFF HENEGAR JEFF HENEGAR REGIONAL REGIONAL 800/443-427223. SEE APPENDIX IF CHECKED317;/575-7028 317;/575-7028 OFFICE OFFICE240

TPO Part 1: <strong>General</strong> InformationGENFLEX STEVENS STEVENSROOFING ROOFING ROOFINGSYSTEMS SYSTEMS SYSTEMS.060 TPO STEVENS EP STEVENS EP0.045 0.060POLYESTER 10 X 10 POLY 10 X 10 POLYWHITE/BLACK/ BLACK/WHITE/ BLACK/WHITE/GRAY GRAY/OTHERS GRAY/OTHERS0.29 0.21 0.3NONE NONE NONEX X XX X XHOT AIR WELD HEAT WELD HEAT WELD10 -15 10 10MECH FAST MECH FAST MECH FASTCONT ADHES CONT ADHES CONT ADHESX X XLEVEL NONE NONEO X XX X XO X O X OX X O X OX O X OX X O X OX X O X OX X XX X XX X XO X XO X XO X XO X O X ONONE NONE NONE0 - 140 -15 - 140 -15 - 140MEMBRANE REINFORCED & REINFORCED &OR COATED UNREINFORCED UNREINFORCEDMETAL EP MEMBRANE EP MEMBRANECONT ADHES CONT ADHES CONT ADHESOR HOT AIR AND ANDWELD HEAT WELD HEAT WELDYES YES YES1992 19921995 1992 1992MILLIONS MILLIONSTHOUSANDS MILLIONS MILLIONSJEANNETTE, PA WESTFIELD, NC WESTFIELD, NCDISTRIBUTORS DIST/DIRECT' DIST/DIRECT'8 200 200YES YES YES800/443-4272 B. ABBOTT B. ABBOTTR. DUCLOS R. DUCLOS800/443-4272 800/621-ROOF 800/621-ROOF241

TPO Part 2: Test ResultsTest description as specified in Draft ASTM Standard1. COMPANY NAME FIRESTONE FIRESTONE GAF GAFBUILDING BUILDING MATERIALS MATERIALSPRODUCTS PRODUCTS CORP. CORP.2. PRODUCT NAME ULTRA PLY ULTRA PLY EVERGUARD EVERGUARD45 MIL 60 MIL TPOSR-45 TPOSR-45TYPE/CLASS3A. Type I (Sheets with internal fabric or scrim)Class P (polypropylene) X X X XClass E (polyethylene)Class O (other olefinic materials)3B. Type II (Sheets with fibers incorporated into production process)Class P (polypropylene)Class E (polyethylene)Class O (other olefinic materials)4. PHYSICAL PROPERTIESThickness:Overall, minimum, inches (ASTM D751) 0.041 0.054 0.045 0.060Coating over scrim, minimum, inches (ASTM D751) Type II: NA 0.018 0.024Tensile strength (ASM D412, Die C):Machine direction, minimum, psiType I: NACross direction, minimum, psiType I: NABreaking strength, minimum, lbf Type II: NA 350 350 250 250Elongation, ultimate, minimum, % (ASTM D751, Grab Method) Type I: NAElongation at break, minimum, % (ASTM D751, Grab Method) Type II: NA 25 25 20 20Tensile set, maximum, % (ASTM D412, Method A, Die C) Type I: NATear Strength, minimum, lbf/inch (ASTM D624, Die C)Type I: NATear Strength, minimum, lbf (ASTM D751, Procedure B) Type II: NA 120 120 80 80Brittleness point, maximum ºF (ASTM D2137) -60 -60 -45 -45Ozone resistance, no cracks (ASTM D1149) PASS PASS PASS PASSProperties after heat aging (retained values) (ASTM D573):Tensile strength , % minimumType I: NABreaking strength, % minimum Type II: NA 90 90 >95 >95Elongation, ultimate, % minimumType I: NAElongation at break, % minimum Type II: NA 90 90 >95 >95Tear strength, % minimumType I: NATearing strength, % minimum Type II: NA 90 90Weight change (mass), maximum %Linear dimensional change, maximum, % (ASTM D1204) -0.10 -0.10 1.5 1.5Water absorption, maximum, mass % (ASTM D471 for 166hours at 158 ºF)Factory seam strength, minimum, lbf/inch (ASTM D751, GrabMethod)0.6 0.6 2.5 2.556 56Weather resistance (Practice G154 or G155):Visual inspection (Pass/Fail) PASS PASSTensile strength, % minimumType I: NABreaking strength, % minimum Type II: NAElongation, ultimate, % minimum Type I: NAElongation at break, minimum, % Type II: NA5. SEE APPENDIX IF CHECKEDNA=not applicable242

TPO Part 2: Test ResultsTest description as specified in Draft ASTM StandardGENFLEX GENFLEX STEVENS STEVENSROOFING ROOFING ROOFING ROOFINGSYSTEMS SYSTEMS SYSTEMS SYSTEMS.045 TPO .060 TPO EP 0.045 EP 0.06X X X X0.039 0.054 0.040 0.0400.012 0.012 0.011 0.011225 225 225 22515 15 20 2055 55 55 55-40 -40 -40 -40PASS PASS PASS PASS100 100 202.5 202.5100 100 18 18100 100 49.5 49.51 1±2 ±2 .5 .5±4 ±4 2 275% OF SHEET 75% OF SHEETSTRENGTH STRENGTHPASS PASS PASS PASS90 9090 90243

Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong> Information1. COMPANY NAME BONDCOTE BONDCOTE BONDCOTE BONDCOTE CARLISLE CARLISLEROOFING ROOFING ROOFING ROOFING SYNTEC SYNTECSYSTEMS SYSTEMS SYSTEMS SYSTEMS INC. INC.2. PRODUCT NAME BONDCOTE BONDCOTE BONDCOTE BONDCOTE SURE-WELD SURE-SEAL350 SERIES 400 SERIES 500 SERIES FLEECEBOND & GSO POLYEPICHLO-1000 ROHYDRIN3. PRODUCT DESCRIPTIONReinforcement 18 X 12 18 X 12 18 X 12 18 X 12 POLYESTER NONEPOLYESTER POLYESTER POLYESTER POLYESTERColor WHITE WHITE WHITE WHITE WHITE, GRAY OR GRAY /TAN ON BLACKInstalled Weight (lbs./ft 2 w/o ballast)` 0.24 0.28 0.33 0.30 0.25 0.484. COATING REQUIRED: NONE NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HEAT WELD HEAT WELD HEAT WELD HEAT WELD HEAT WELD CONTACT7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted(ballast: lbs./ft 2 ) 10 10 10 10Partially Adhered (method) MECHANICALLY MECHANICALLY MECHANICALLY MECHANICALLY MECH. FAST.BLACKADHESIVEFully Adhered(method) CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES. CONT. ADHES.Protected Roof Membrane Assembly X X X X8. MINIMUM SLOPE REQUIRED (inches per foot) DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL 1/4"9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X O X O X O XMineral Fiber X O X O X O X O OPolystyrene S O S O S O X O OCellular Glass X X X X X XPhenolicFiberboard X X X X X XPerlite X X X X O OPolyisocyanurate X X X X X XPolyurethane X X X X X XGypsum X X X X O X OConcrete O O O X O X OWood Plank O O O X O X OPlywood O O O X O X OExisting Built-up Membrane O O O X O X O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 180 0 – 180 0 – 180 0 – 180 –25 – 140 –20 – 18012. FLASHING MATERIAL ROOF MEMB ROOF MEMB ROOF MEMB ROOF MEMB REINFORCED & UNCUREDNBP-COATED NBP-COATED NBP-COATED NBP-COATED UNREINFORCED OR CUREDMETAL METAL METAL METAL MEMBRANE EPDM & ECO/CO13. FLASHING METHOD HEAT WELD & HEAT WELD & HEAT WELD & HEAT WELD & HEAT WELD & CONTACTCONTACT CONTACT CONTACT CONTACT CONTACT ADHESIVEADHESIVE ADHESIVE ADHESIVE ADHESIVE ADHESIVE14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES NO15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USA 1987 1977Within USA 1977 1977 1995 1991 1991 197717. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS THOUSANDS MILLIONS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT DIRECT DISTRS, DIRECT DISTRS, DIRECT19. NUMBER OF REGIONAL LOCATIONS 4 4 4 4 70 7020. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. C. KUHL C. KUHL800/368–2160 800/368–2160 800/368–2160 800/368–2160 717/245–7000 717/245–700022. FOR TECHNICAL INFORMATION, CONTACT: TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. S. IBRAHIM S. IBRAHIM800/368–2160 800/368–2160 800/368–2160 800/368–2160 717/245–7000 717/245–700023. SEE APPENDIX IF CHECKED X X X244

Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong> InformationCOOLEY COOLEY COOLEY DURO-LAST DURO-LAST ECOLOGY ERSYSTEMS ERSYSTEMS FLEX FLEXENGINEERED ENGINEERED ENGINEERED INC. INC. ROOF MEMBRANE MEMBRANEMEMBRANE MEMBRANE MEMBRANE SYSTEMS INTERNATIONAL INTERNATIONALC3 RAM C3 - TPO DURO-LAST DURO-LAST ERS 900 PERMAWELD PERMAWELD FLEX FLEX40 MIL 50 MIL FLEECE-BACKED FB 100 FB ELVALOYPOLYESTER WOVEN & POLYESTER REINFORCED REINFORCED POLYESTER CPA MEMBRANE CPA REINFORCED REINFORCEDNONWOVEN POLYESTER POLYESTER REINFOR W/FLEECE POLYESTER POLYESTER W/ POLYESTEER W/POLYESTER BACK POLY FAB REINFORCED FLEECE BACKING FLEECE BACKINGWHITE / TAN / WHITE & WHITE / TAN / WHITE / TAN / GRAY BLACK WHITE WHITE WHITE / WHITE /GRAY BLACK GRAY GRAY OFF-WHITE OFF-WHITE0.030 NOM. 0.25 0.3O 0.40 0.4 0.33 0.44 0.35NONE NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XHOT AIR HOT AIR HOT AIR HEAT WELD HEAT WELD HEAT WELD HEAT WELD OR HEAT WELD HOT AIR WELD HOT AIR WELDSOLVENT WELD10 10 10 10 10 10 10 MIN 10 MINMECHANICALLY MECHANICALLY MECHANICALLY MECHANICALLY MECH. FAST. MECHANICALLY MECH. FAST. MECH. FAST.CONT. ADHES. BITUMEN HOT AS./CLD AD. COLD ADHES HOT AS./CLD AD. HOT AS./CLD AD.X X X X X X X X X XLEVEL LEVEL LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVELX X X X X O X X X XO O X X X O X X X OX O X S S O X O X O X O XO O X X X O O O X XX X O O O X XX X X X O X X X XO O X X O X X X XX X X X X O X X X X OX X X S S O X X X OX O X X X O X X X X OO O X X X O X O X O X XX O X X X O X X X X OX O X X X O X X X X OO O X S O S O O S O S O X X ONONE NONE N/A NONE NONE NONE NONE NONE NONE NONE40 – 120 40 – 120 40 -120 –30 – 120 –30 – 120 40 - 120 –30 – 160 –30 – 160 0 – 120 0 – 120C3, RAM, C3, RAM, REINFORCED SAME SAME SAME ROOF ROOF ROOF ROOFC3-COATED C3-COATED & NON- MATERIAL MATERIAL MATERIAL MEMBRANE / MEMBRANE / MEMBRANE / MEMBRANE /METAL METAL REINFORCED COATED METAL COATED METAL COATED METAL COATED METALHOT AIR HOT AIR & HOT AIR / HEAT WELD HEAT WELD SELF ADHERED HEAT WELD HEAT WELD HOT AIR HOT AIRBONDING ADHESIVE W/HEAT WELD OR OR WELD WELDADHESIVE WALL MASTIC WALL MASTIC OR ADHESIVE OR ADHESIVEYES YES YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA USA19971988 1990 1997 1978 1988 1+99 1994 1984 1988 1988THOUSANDS THOUSANDS>1,000,000 >1,000,000 >1,000,000 THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSDIRECT DIRECT DIRECT DISTRS, DIRECT DISTRS, DIRECT DIRECT DIRECT10 10 4 4 20 14 14 4YES YES YES YES YES YES YES YES YESJ. SMITH J. SMITH J. SMITH SALES DEPT. SALES DEPT. E. NELSON T. LEONARD T. LEONARD J. DOYLE J. DOYLE800/248–0280 800/248–0280 800/403-7747 800/403–7747 610/286–7788 610/286–7788T. SAILLANT T. SAILLANT T. SAILLANT ENGR. DEPT. ENGR. DEPT. B. PFIEFER J. LEONARD R. BAKER M GIANGIACOMO M GIANGIACOMO800/248–0280 800/248–0280 800/403-7747 800/403–7747 610/286–7788 610/286–7788X X X X245

Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong> Information1. COMPANY NAME FLEX GENFLEX GENFLEX INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTALMEMBRANE ROOFING ROOFING COATINGS CORP. COATINGS CORP COATINGS CORP.INTERNATIONAL SYSTEMS SYSTEMS (I-CON) (I-CON) (I-CON)2. PRODUCT NAME FLEX GENFLEX GENFLEX ROOFTEC ROOF TEC SA ROOFMF/R ELVALOY .045 TPO .060 TPO HA CA TEC3. PRODUCT DESCRIPTIONReinforcement REINFORCED POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERPOLYESTERColor WHITE / WHITE / BLACK / WHITE / BLACK / BLACK BLACK BLACKOFF-WHITE GRAY GRAYInstalled Weight (lbs./ft 2 w/o ballast)` 0.30 0.21 0.29 0.40 0.40 0.404. COATING REQUIRED: NONE NONE NONE NONE NONE NONE5. USE IN:New <strong>Roofing</strong> X X X X X XReroofing X X X X X X6. FIELD LAP JOINT METHOD HOT AIR WELD HEAT WELD HEAT WELD HEAT WELD HEAT WELD SELF-ADHERED7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted(ballast: lbs./ft 2 ) 10 MIN 10-15 10-15Partially Adhered (method) MECH. FAST. MECH. FAST. MECH. FAST.Fully Adhered(method) CONT. ADHES. CONT. ADHES. CONT. ADHES. BITUMEN CONT. ADHES. SELF-ADHEREDProtected Roof Membrane Assembly X X X X X8. MINIMUM SLOPE REQUIRED (inches per foot) DEAD LEVEL LEVEL LEVEL DEAD LEVEL DEAD LEVEL DEAD LEVEL9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass Fiber X O O O O OMineral Fiber X X X O O OPolystyrene S O O O O O OCellular Glass X O X X O O OPhenolic O O OFiberboard X X X O O OPerlite X O X X O O OPolyisocyanurate X O X X O O OPolyurethane X O X X O O OGypsum X O X X O O OConcrete S O O O O OWood Plank O O O O O OPlywood X O O O O O OExisting Built-up Membrane X O O O O O O10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE NONE NONE NONE NONE NONE11. WORKABLE TEMPERATURE RANGE (degrees F) 0 – 120 0 – 140 0 – 140 40 – 120 40 – 120 40 – 12012. FLASHING MATERIAL ROOF MEMBRANE MEMBRANE H150 E, HYLOAD HYLOAD WS SAME MATRLMEMBRANE / OR COATED OR COATED SAM, WS STRAPPED STRAPPEDCOATED METAL METAL METAL STRAP METHOD METHOD METHOD13. FLASHING METHOD HOT AIR CONT. ADHES. CONT. ADHES. SELF-ADHERING SELF-ADHERING SELF-ADHERINGWELD OR HOT AIR OR HOT AIR WITH WITHOR ADHESIVE WELD WELD HEAT WELD HEAT WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES YES YES YES YES YES15. COUNTRY OF:Origin USA USA USA USA USA USAManufacture USA USA USA USA USA USA16. YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA 1988 1995 1995 1969 1977 198517. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USA THOUSANDS THOUSANDS THOUSANDS > 1 MILLION THOUSANDS THOUSANDS18. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DISTRIBUTORS DISTRIBUTORS DIRECT DIRECT DIRECT19. NUMBER OF REGIONAL LOCATIONS 4 8 8 20 20 2020. LICENSED APPLICATOR AGREEMENT (yes/no) YES YES YES YES YES YES21. FOR SALES INFORMATION, CONTACT: J. DOYLE SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT.610/286–7788 800/443-4272 800/443-4272 JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM22. FOR TECHNICAL INFORMATION, CONTACT: M GIANGIACOMO TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT.610/286–7788 800/443-4272 800/443-427223. SEE APPENDIX IF CHECKED X X X246

Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong> InformationINTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL INTERCONTINENTAL SEAMAN SEAMANCOATINGS CORP. COATINGS CORP. COATINGS CORP. COATINGS CORP. COATINGS CORP. COATINGS CORP. COATINGS CORP. COATINGS CORP. CORP. CORP.(I-CON) (I-CON) (I-CON) (I-CON) (I-CON) (I-CON) (I-CON) (I-CON)SA ROOFTEC SA ROOFTEC SA ROOFTEC ROOFTEC ROOFTEC SA ROOFTEC SA ROOFTEC SA ROOFTEC FIBERTITE FB FIBERTITEWS BWS BVWS PM WHA WCA W W WWSPOLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER REINFORCED REINFORCEDPOLYESTER W/ POLYESTERFLEECE BACKINGBLACK BLACK WHITE WHITE WHITE WHITE LIGHT BEIGE LIGHT BEIGE0.50 0.50 0.70 0.40 0.40 0.40 0.40 0.40 < 0.28 < 0.25NONE NONE NONE NONE NONE NONE NONE NONE NONEX X X X X X X X X XX X X X X X X X X XHEAT WELD HEAT WELD SELF-ADHERED HEAT WELD HEAT WELD SELF-ADHERED SELF-ADHERED HEAT WELD HEAT WELD HEAT WELD10 MINBONDING ADHS.SELF-ADHERED X SELF-ADHERED BITUMEN ADHESIVE SELF-ADHERED SELF-ADHERED SELF-ADHERED ADHESIVE BONDING ADHS.X X X XDEAD LEVEL DEAD LEVEL DEAD LEVEL 1 1 1 1 1 NONE NONEO O O O O O X XO O O O O O O XO O O O O O O O X S OO O O O O O O X S OO O O O O O O XO X O O O O O XO O O O O O O XO X O O O O O X XO O O O O O O X O XO X X O O O O O O X O X OO X X O O O O O O X O SO X O O O O O O X O SO O X O O O O O O X O X S OO X O O O O O X O X S ONONE NONE NONE NONE NONE NONE NONE NONE NONE40 – 120 40 - 120 40 – 120 40 – 120 40 – 120 40 – 120 40 – 120 0 – 120 –30 – NO LIMITSAME MATRL SAME SAME MATRL ALPSAM WS ALPSAM WS SAME MATRL SAME MATRL SAME MATRL ROOF ROOFSTRAPPED MATERIAL STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED MEMBRANE MEMBRANEMETHOD METHOD METHOD METHOD METHOD METHOD METHOD COATED METAL COATED METALSELF-ADHERING STRAPPED SELF-ADHERING SELF-ADHERING SELF-ADHERING SELF-ADHERING SELF-ADHERING SELF-ADHERING HEAT WELD, HEAT WELD,WITH WITH WITH WITH WALL MASTIC WALL MASTICHEAT WELD HEAT WELD HEAT WELD HEAT WELD OR ADHESIVE OR ADHESIVEYES NO YES YES YES YES YES YES YES YESUSA USA USA USA USA USA USA USA USAUSA USA USA USA USA USA USA USA USA1995 19821985 1989 1989 1989 1989 1989 1989 1994 1978THOUSANDS THOUSANDSTHOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS >1,000,000DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT20 20 20 20 20 20 20 20 20 20YES YES YES YES YES YES YES YES YES YESSALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. 800/927-8578 800/927-8578JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUM JOE NUSSBAUMTECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. 800/927-8578 800/927-8578X X X X X X X X X X247

Other Prefabricated Sheet-Applied Membranes Part 1: <strong>General</strong> Information1. COMPANY NAME VERSICO,INC.2. PRODUCT NAME VERSIWELDPREMIER.045, .0603. PRODUCT DESCRIPTIONReinforcementColorGRAY, TANWHITE ON BLACKInstalled Weight (lbs./ft 2 w/o ballast)` 0.22 - 0.324. COATING REQUIRED: NONE5. USE IN:New <strong>Roofing</strong>Reroofing6. FIELD LAP JOINT METHOD HEAT WELDXX7. TYPES OF ROOF SYSTEMSLoose Laid/Ballasted(ballast: lbs./ft 2 ) 10-15Partially Adhered (method)Fully Adhered(method)Protected Roof Membrane AssemblyMECH. FAST.CONT. ADHES.8. MINIMUM SLOPE REQUIRED (inches per foot) NONE9. ACCEPTABLE SUBSTRATES(X=direct application permitted)(S=separator sheet required)(O=overlayment required in some or all circumstances)Glass FiberMineral FiberPolystyreneCellular GlassPhenolicFiberboardPerlitePolyisocyanuratePolyurethaneGypsumConcreteWood PlankPlywoodExisting Built-up Membrane10. RESTRICTED REGIONS (refer to manufacturer's literature) NONE11. WORKABLE TEMPERATURE RANGE (degrees F) –25 – 18012. FLASHING MATERIAL VERSIWELDOXXXXXXXXOOOOXFLASHING ORCOATED METAL13. FLASHING METHOD CONTACTADHESIVE &HEAT WELD14. PREFORMED ACCESSORIES AVAILABLE (yes/no) YES15. COUNTRY OF:OriginManufacture16. YEAR OF FIRST COMMERCIAL USEOutside USAWithin USA17. NUMBER OF SQUARES INSTALLED (100 ft 2 )Outside USAWithin USAUSAUSAMILLIONS18. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS19. NUMBER OF REGIONAL LOCATIONS 15020. LICENSED APPLICATOR AGREEMENT (yes/no) YES21. FOR SALES INFORMATION, CONTACT: M. MCAULEY800/992–766322. FOR TECHNICAL INFORMATION, CONTACT: R, GIANGIULI23. SEE APPENDIX IF CHECKED800/992–7663248

THIS PAGE LEFT BLANK INTENTIONALLY

Other Prefabricated Sheet-Applied Membranes Part 2: Test Results1. COMPANY NAME BONDCOTE ROOFING SYSTEMS BONDCOTE ROOFING SYSTEMS BONDCOTE ROOFING SYSTEMS BONDCOTE ROOFING SYSTEMS2. PRODUCT NAME BONDCOTE 350 SERIES BONDCOTE 400 SERIES BONDCOTE 500 SERIES BONDCOTE FLEECEBOND 10003. PRODUCT DESCRIPTION ACRYLONITRILE BUTADIENE POLYMER BLEND (NBP) ACRYLONITRILE BUTADIENE ACRYLONITRILE BUTADIENEPOLYMER BLEND (NBP) POLYMER BLEND (NBP) POLYMER BLEND (NBP)4. THICKNESS METHOD ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 751RESULTS 35 MILS 40 MILS 50 MILS 100 MILS5. TENSILE STRENGTH METHOD ASTM D 751 GRAB METHOD ASTM D 751 GRAB METHOD ASTM D 751 GRAB METHOD ASTM D 751 GRAB METHODASTM D 882 ASTM D 882 ASTM D 882 ASTM D 882RESULTS 390 X 300 LBS. 390 X 300 LBS. 450 X 330 LBS. 390 X 300 LBS.6000 PSI 6000 PSI 7500 PSI 6000 PSI6. LAP JOINT METHOD METHOD ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 751RESULTS EXCEED PRODUCT STRENGTH EXCEED PRODUCT STRENGTH EXCEED PRODUCT STRENGTH EXCEED PRODUCT STRENGTH7. ELONGATION AT BREAK METHOD ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 751RESULTS 30 X 35% 30 X 35% 30 X 35% 30 X 35%8. TENSILE SET METHODRESULTS9. LOW TEMPERATURE METHOD ASTM D 2136 ASTM D 2136 ASTM D 2136 ASTM D 2136FLEXIBILITYRESULTS –40 F, NO CRACKS –40 F, NO CRACKS –40 F, NO CRACKS –40 F, NO CRACKS10. WATER ABSORPTION METHOD ASTM D 570 ASTM D 570 ASTM D 570 ASTM D 570RESULTS 95% OF BREAKING STRENGTH>90% OF ELONGATION >90% OF ELONGATION >90% OF ELONGATION13. OZONE RESISTANCE METHOD ASTM D 1149, 100 PPHM, 104 F, ASTM D 1149, 100 PPHM, 104 F, ASTM D 1149, 100 PPHM, 104 F, ASTM D 1149, 100 PPHM, 104 F,1/8" BENT LOOP 1/8" BENT LOOP 1/8" BENT LOOP 1/8" BENT LOOPRESULTS NO CRACKS, NO CRACKS, NO CRACKS, NO CRACKS,7X MAGNIFICATION 7X MAGNIFICATION 7X MAGNIFICATION 7X MAGNIFICATION14. RESISTANCE TO METHOD FS191, METHOD 5804, CARBON FS191, METHOD 5804, CARBON FS191, METHOD 5804, CARBON FS191, METHOD 5804, CARBONACCELERATED ASTM G90 EMMAGUA ASTM G90 EMMAGUA ASTM G90 EMMAGUA ASTM G90 EMMAGUAWEATHERING RESULTS NO CRACKING, 10,000 HOURS NO CRACKING, 10,000 HOURS NO CRACKING, 10,000 HOURS NO CRACKING, 10,000 HOURS4,000,000 LANGLEYS 4,000,000 LANGLEYS 4,000,000 LANGLEYS 4,000,000 LANGLEYS15. DYNAMIC IMPACTING METHOD FS 1018, METHOD 2031 FS 1018, METHOD 2031 FS 1018, METHOD 2031 FS #1018 METHOD 2031(PUNCTURING)RESULTS 290 LBS. 290 LBS. 325 LBS. 290 LBS.16 TEAR RESISTANCE METHODRESULTS17. TEARING STRENGTH METHOD ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 7518 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLERESULTS 120 X 110 LBS. 125 X 115 LBS. 130 X 120 LBS. 125 X 115 LBS.18. LOW TEMPERATURE METHODIMPACTRESULTS19. PERMEABILITY METHOD ASTM E 96, METHOD A ASTM E 96, METHOD A ASTM E 96, METHOD A ASTM E 96, METHOD ARESULTS 0.22 US PERMS 0.22 US PERMS 0.22 US PERMS 0.22 US PERMS20. DIMENSIONAL CHANGE METHOD ASTM D 1204 ASTM D 1204 ASTM D 1204 ASTM D 1204AFTER STRESSRELAXATION RESULTS

Other Prefabricated Sheet-Applied Membranes Part 2: Test ResultsCARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED COOLEY ENGINEERED MEMBRANE COOLEY ENGINEERED MEMBRANE COOLEY ENGINEERED MEMBRANESURE-WELD REINFORCED TPO POLYEPICHLORHYDRIN ECO/CO C3 RAM C3-TPOREINFORCED THERMOPLASTIC NONREINFORCED TRI-POLYMER ALLOY TRI-POLYMER ALLOY POLYPROPYLENEPOLYOLEFIN MEMBRANE POLYEPICHLOROHYDRIN ELVALOY KEE ELVALOY KEEASTM D 751 ASTM D412 ASTM D 751 ASTM D 751 ASTM D 75160 MIL0.045 IN., 0.060 IN. ±10% 40 MILS 45 MILS 45±10%ASTM D 751 ASTM D 412 ASTM D 751, GRAB ASTM D 751, GRAB ASTM 7 751340 LBF 1500 PSI (MIN) 300 X 300 LBS. 350 X 325 LBS. 300 X 300HEAT WELD ASTM D 638 ASTM D 638 HEAT WELDRUPTURE OUTSIDE SEAM 90% 90%OVERLAPASTM D 751 (FABRIC RUPTURE) ASTM D 412 ASTM D 751 ASTM D 75125% 200% (MIN) 17% X 19% 40% X 30%ASTM D 2137 ASTM D 746 ASTM D 2136 ASTM D 2136 ASTM D 2136–50 F –20F (MIN) –40 F, PASS –40 F, PASS -40 FASTM D 471 (7 DAYS @ 158 F) ASTM D 750 ASTM D 750 ASTM D 4717 DAYS @ 158 F 7 DAYS @ 158 F2.0% 1% MAX. 1% MAX. ± 4%ASTM D 573 (28 DAYS @ 240 F) ASTM D 573,168 HRS @240F ASTM D 3045 ASTM D 3045TENSILE -- 340 LBF 1500PSI (MIN) TENSILE 80% X 80% 80% X 80%TEAR -- 130 LBF150% (MIN) ELONGATIONASTM D 1149 ASTM D 1149, 100 PPHM @ 50% ASTM D 1149 ASTM D 1149168 HOURS @ 100 mPa) STRAIN 168 HOURS @ 140 FNO CRACKS NO CRACKS PASS, NO CRACKS PASS, NO CRACKS7X MAGNIFICATION7X MAGNIFICATIONASTM G 26 ASTM D 882, ASTM D882,(5040 KJ/M 2 , 176 F) ASTM E 838 ASTM E 838NO LOSS OF BREAKING OR TEARING PASS PASSSTRENGTH, NO SURFACE CRACKS 2 MILLION LANGLEYS 2 MILLION LANGLEYSFS 1018 METHOD 2031 FS 1018 METHOD 2031280 LB. 280 LB.ASTM D 624 (DIE C) ASTM D 751 ASTM D 751 ASTM D 751150 LBF/IN (MIN) 100 LB. X 100 LB. 100 LB. X 100 LB. 100 X 100ASTM D 751 ASTM D 751 ASTM D 751TONGUE TEAR130 LBF 100 X 100 LBS. 100 X 100 LBS.CTM 028 CTM 028–20 F, NO CRACKS –20 F, NO CRACKSASTM E 96 ASTM E 96, ASTM E 96 ASTM E96PROCEDURE B OR BWPROCEDURE B OR BW0.05 PERMS 0.040 PERMS 0.003 PERMS 0.003 PERMSASTM D 1204 ASTM 12046 HOURS @ 176 F 6 HOURS @ 176 F0.3% 0.3%251

Other Prefabricated Sheet-Applied Membranes Part 2: Test Results1. COMPANY NAME DURO-LAST INC. DURO-LAST INC. ECOLOGY ROOF SYSTEMS ERSYSTEMS2. PRODUCT NAME DURO-LAST 40 MIL DURO-LAST 50 MIL ERS 900 PERMAWELD FLEECE-BACKED3. PRODUCT DESCRIPTION PVC BLEND REINFORCED PVC BLEND REINFORCED POLYESTER REINFORCED CPA MEMBRANE REINFORCEDW/POLYESTER FABRIC W/POLYESTER FABRIC KEE W/POLYESTER FLEECE FABRIC4. THICKNESS METHOD ASTM D 751 ASTM D 751 ASTM 2083 ASTM D 751RESULTS 40 MILS NOMINAL 50 MILS 60 MIL 40 MILS NOM.5. TENSILE STRENGTH METHOD ASTM D 751, GRAB METHOD ASTM D 751, GRAB METHOD ASTM D 412 ASTM D 882ASTM D 882 ASTM D 882 ASTM D 751RESULTS 435 X 350 LBS. 450 X 380 LBS. 1699 LBS. SQ. IN. 300 X 325 LBS.7200 PSI 8780 PSI 8000 PSI6. LAP JOINT METHOD METHOD ASTM D 751 ASTM D 751 HEAT WELD ASTM D 751RESULTS 350 LBS. (MIN) 350 LBS. (MIN) > 35O LBS.7. ELONGATION AT BREAK METHOD ASTM D 751 ASTM D 751 ASTM D 412 ASTM D 751RESULTS 35% 35% 170% 35%8. TENSILE SET METHODRESULTS9. LOW TEMPERATURE METHOD ASTM D 2136 ASTM D 2136 CGSB-37-6PS6M ASTM D 2136FLEXIBILITYRESULTS –40 F, NO CRACKS –40 F, NO CRACKS PASS –40 F, PASS10. WATER ABSORPTION METHOD ASTM D 570 @ 70 F@ 122 F 48 HOURSRESULTS 1.4%11. DIMENSIONAL STABILITY METHOD ASTM D 1204 ASTM D 1204 ASTM D 570AFTER WATER 7 MILLION LANGLEYS 4.5 MILLION LANGLEYS15. DYNAMIC IMPACTING METHOD FS 1018, METHOD 2031 FS 1018, METHOD 2031 CBSB-37-GP56M FS 101B, METHOD 2031(PUNCTURING)RESULTS 350 LBS. 375 LBS. PASS 225 LBS.16 TEAR RESISTANCE METHOD ASTM D 751 ASTM D 751 ASTM D 624 ASTM D 751TONGUE TONGUE 8 IN X 8 IN SAMPLERESULTS 130 X 110 LBS. 140 X 100 LBS. 330 LBS. 90 X 120 LBS.17. TEARING STRENGTH METHOD ASTM D 751 ASTM D 751 ASTM D 751TONGUETONGUERESULTS 130 X 110 LBS. 140 X 100 LBS. 120 LBS.18. LOW TEMPERATURE METHOD ASTM D 2136, –40 F ASTM D 2136, –40 F ASTM D 2136, –30 FIMPACTRESULTS NO CRACKING NO CRACKING NO CRACK19. PERMEABILITY METHOD ASTM E 96, PROCEUDRE BW ASTM E 96, PROCEDURE BW ASTM D 96, PROCEDURE A ASTM E 96, PROCEDURE AASTM E 96, WVT. PROC B, M, A ASTM E 96, WVT. PROC B, M, A WATER VAPOR EMISSIONRESULTS 0.25 US PERMS 0.22 PERMS 0.136/GRAINS/IN SQ FT 0.2 US PERMS0.086 G/HR/MXM 0.07 G/HR/MXM 1..39 G/MXM/2420. DIMENSIONAL CHANGE METHOD ASTM D 1204AFTER STRESSRELAXATION RESULTS 0.2%21. CONE PENETRATION METHODRESULTS22. SEE APPENDIX IFCHECKEDX252

Other Prefabricated Sheet-Applied Membranes Part 2: Test ResultsERSYSTEMS FLEX MEMBRANE INT'L INC. FLEX MEMBRANE INT'L INC. FLEX MEMBRANE INT'L INC. GENFLEX ROOFING SYSTEMSPERMAWELD FLEX FB 100 FLEX FB ELVALOY FLEX MF/R ELVALOY GENFLEX TPO .045POLYESTER-REINFORCED CPA POLYESTER REINFORCED WITH POLYESTER REINFORCED WITH POLYESTER REINFORCED WITH TPO THERMOPLASTIC OLEFINFLEECE, ELVALOY KEE FLEECE, ELVALOY KEE FLEECE, ELVALOY KEEASTM D 751 ASTM D 751 ASTM D 751 ASTM D 751, GRAB ASTM D 75140 MIL NOM. AND 48 MIL NOM. 100 MIL NOM. 45 MIL NOM. 40 MIL NOM. 0.045 INASTM D 882 ASTM D 638, PSI ASTM D 751, GRAB ASTM D 751 ASTM D 751ASTM D 751315 X 325 LBS. MD 1844 > 340 LBS. 235 LBS. 225 LB./F7450 PSI TD 2111ASTM D 751 ASTM D 638 ASTM D 638 ASTM D 751 HEAT WELD> 35O LBS. > 90% 90 % > 400 LBS.ASTM D 751 ASTM D 638, % ASTM D 751 ASTM D 751 ASTM D 412 DIEC35% X 35% MD 183 > 28% > 28% 500% ULTIMATETD 108ASTM D 2136 –30 F ASTM D 2136 ASTM D 2136 ASTM D 2136 ASTM D 2137NO CRACKS –40 F, PASS –40 F, PASS –40 F, PASS -40 F, PASSASTM D 750 @ 70 F ASTM D 0573 ASTM D 570 ASTM D 570 ASTM D 471@122 F 48 HOURS> 1% 1.5 % MAX. 1.5% MAX. 1.5% MAX. ±2%ASTM D 570NO CHANGE14 DAYS @ 175 F ASTM D 0573 ASTM D 0573 ASTM D 3045 ASTM D 573100% STRENGTH RETENTION, NO 90% STRENGTH RETENTION OF ORIGINAL 90% STRENGTH RETENTION OF 90% STRENGTH RETENTION OF TENSILE STRENGTH 225 LB/FCRACKING, CRAZING, BLISTERING ORIGINAL ORIGINALASTM D 1149 ASTM D 1149 3 DAYS @ 100 PPHM -- 100 F AND ASTM D 11493 DAYS @ 300 PPHM -- 100 FPASS, NO CRACKS PASS, NO CRACKS NO CRACKING PASS7 X MAGNIFICATION 7X MAGNIFICATIONASTM D 2565 ASTM D 2565 ASTM D 2565 ASTM D 2565 ASTM G 26ASTM E 838 (XENON ARC) (XENON ARC) (XENON ARC)20,000 HOURS 10 M HRS., NO CHANGE 10 M HRS., NO CHANGE 10 M HRS., NO CHANGE PASS4.5 MILLION LANGLEYSFS 101B, METHOD 2031 FS 1018, METHOD 2031 FS 1018, METHOD 2031 FS 1018, METHOD 2031 FTM 101C, METHOD 2031250 LBS. 295 LBS. 260 LBS. 260 LBS. 200 LBS. MINIMUMASTAM D 751 ASTM D 751 ASTM D 751 ASTM D 7518 IN. X 8 IN. SAMPLE90 X 120 LBS. 110 X 100 LBS. 100 X 100 LBS. 120 X 120 LBS.ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 751 ASTM D 7518 IN. X 8 IN. SAMPLE PROCEDURE B90 X 120 120 X 110 LBS. 100 X 100 LBS. 120 X 120 LBS. 55 LB./FASTM D 2136, –30 F ASTM D 2136 ASTM D 2136 ASTM D 2136 ASTM D 2137NO CRACK –40 F, NO CRACKS –40 F, NO CRACKS –40 F, NO CRACKS –40 FASTM E 96, PROCEDURE A ASTM E 96 ASTM E 96 ASTM E 96 ASTM 3 96WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION0.2 US PERMS 3.5/M 2 /DAY 3.5/M 2 /DAY 3.5/M 2 /DAY 12 PERMSASTM D 1204 ASTM D 1204 ASTM D 1204 ASTM D 1204 ASTM D 12040.2% < 0.5% < 0.5% < 0.5% ±2%37-GP-54PASSX253

Other Prefabricated Sheet-Applied Membranes Part 2: Test Results1. COMPANY NAME GENFLEX ROOFING SYSTEMS INTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGS2. PRODUCT NAME GENFLEX TPO .060 ROOFTEC HA ROOFTEC CA SA ROOFTEC3. PRODUCT DESCRIPTION TPO THERMOPLASTIC OLEFIN POLYESTER REINFORCED KEE POLYESTER REINFORCED KEE POLYESTER REINFORCED KEE4. THICKNESS METHOD ASTM D 751 ASTM D 2083 ASTM D 2083 ASTM D 2083RESULTS 0.060 IN. 60 MIL 60 MIL 60 MIL5. TENSILE STRENGTH METHOD ASTM D 751 ASTM D 412 ASTM D 412 ASTM D 412RESULTS 225 LB./F 1600 LB/SQ.IN 1600 LB/SQ.IN 1500 LB/SQ.IN6. LAP JOINT METHOD METHOD HEAT WELD HEAT WELD HEAT WELD SELF-ADHEREDRESULTS7. ELONGATION AT BREAK METHOD ASTM D 412 DIEC ASTM D 412 ASTM D 412 ASTM D 412RESULTS 500% ULTIMATE 170% 170% 170%8. TENSILE SET METHODRESULTS9. LOW TEMPERATURE METHOD ASTM D 2137 CGSB 37-GP56M CGSB 37GP56M CGSB 37GP56MFLEXIBILITYRESULTS -40 F, PASS PASS PASS PASS10. WATER ABSORPTION METHOD ASTM D 471RESULTS ±2%11. DIMENSIONAL STABILITY METHODAFTER WATERABSORPTIONRESULTS12. HEATING AGING METHOD ASTM D 573RESULTSTENSILE STRENGTH 225 LB/F13. OZONE RESISTANCE METHOD ASTM D 1149RESULTSPASS14. RESISTANCE TO METHOD ASTM G 26 CGSB 37-GP56M CGSB 37-GP56M CGSB 37-GP56MACCELERATEDWEATHERING RESULTS PASS PASS PASS PASS15. DYNAMIC IMPACTING METHOD FTM 101C, METHOD 2031 CGSB37 - CGSB37 - CGSB37 -(PUNCTURING) GP56M GP56M GP56MRESULTS 200 LBS. MINIMUM PASS PASS PASS16 TEAR RESISTANCE METHOD ASTM D 624 ASTM D 624 ASTM D 624RESULTS 330 LBS. 330 LBS. 270 LBS.17. TEARING STRENGTH METHOD ASTM D 751PROCEDURE BRESULTS 55 LB./F18. LOW TEMPERATURE METHOD ASTM D 2137IMPACTRESULTS –40 F19. PERMEABILITY METHOD ASTM E 96 ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A12 PERMS WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSIONRESULTS 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT.20. DIMENSIONAL CHANGE METHOD ASTM D 1204AFTER STRESSRELAXATION RESULTS ±2%21. CONE PENETRATION METHOD22. SEE APPENDIX IFCHECKEDRESULTS254

Other Prefabricated Sheet-Applied Membranes Part 2: Test ResultsINTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGS INTERCONTINENTAL COATINGSSA ROOFTEC WS SA ROOFTEC BWS BVWS SA ROOFTEC PM ROOFTEC WHA ROOFTEC WCAPOLYESTER REINFORCED KEE POLYESTER REINFORCED KEE POLYESTER REINFORCED KEE POLYESTER REINFORCED KEEASTM D 2083 ASTM D 2083 ASTM D 2083 ASTM D 208375 MIL 75 MIL 70 MIL 60 MIL 60 MILASTM D 412 ASTM D 412 ASTM D 412 ASTM D 412 ASTM D 4121500 LB/SQ.IN 1500 LB/SQ IN 1500 LB/SQ.IN 1600 LB/SQ.IN 1600 LB/SQ.INHEAT WELD HEAT WELD SELF-ADHERED HEAT WELD HEAT WELDASTM D 412 ASTM D 412 ASTM D 412 ASTM D 412 ASTM D 412170% 170% 170% 170% 170%CGSB 37-GP56M CGSB 37-GP56M CGSB 37-GP56M CGSB 37GP56M CGSB 37-GP56MPASS PASS PASS PASS PASSCGSB 37-GP56M CGSB 37-GP56M CGSB 37-GP56M CGSB37 - CGSB37 -GP56MGP56MPASS PASS PASS PASS PASSCGSB37 - CGSB 37-GP56M CGSB 37-GP56M CGSB37 - CGSB37 -GP56M GP56M GP56MPASS PASS PASS PASS PASSASTM D 624 ASTM D 624 ASTM D 624 ASTM D 624165 LBS. 165 LBS. 330 LBS. 330 LBS.ASTM E 96 PROCEDURE A ASTM E 96, PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE AWATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION0.136/GRAINS/IN. HG. SQ. FT. 0.136 GRAIN/IN HG SQ FT 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT.255

Other Prefabricated Sheet-Applied Membranes Part 2: Test Results1. COMPANY NAME INTERCONTINENTAL COATINGS INTERCONTINENTAL SEAMAN CORP. SEAMAN CORP.2. PRODUCT NAME SA ROOFTEC W SA ROOFTEC WWS FIBERTITE FB FIBERTITE3. PRODUCT DESCRIPTION POLYESTER REINFORCED KEE POLYESTER REINFORCED KEE POLYESTER REINFORCED EIP POLYESTER REINFORCED EIPW/FLEECE BACKING4. THICKNESS METHOD ASTM D 2083 ASTM D 2083 ASTM D 751 ASTM D 751RESULTS 60 MIL 60 MIL 40 MIL 33 MILS NOM5. TENSILE STRENGTH METHOD ASTM D 412 ASTM D 412 ASTM D 751 ASTM D 751, GRAB METHODASTM D 882 ASTM D 882RESULTS 1300 LB/SQ.IN 1500 LB/SQ.IN 375 X 300 LBS. 450 LBS. X 450 LBS.8500 PSI 8500 PSI6. LAP JOINT METHOD METHOD SELF-ADHERED HEAT WELD ASTM D 751 ASTM D 751RESULTS > 400 LBS. >400 LBS.7. ELONGATION AT BREAK METHOD ASTM D412 ASTM D 412 ASTM D 751 ASTM D 751RESULTS 170% 170% 15% WARP X 15% FILL 20% WARP, 30% FILL8. TENSILE SET METHODRESULTS9. LOW TEMPERATURE METHOD CGSB 37-GP56M CGSB 37-GP56M ASTM D 2146 ASTM D 2136FLEXIBILITYRESULTS PASS PASS –30 F, NO CRACKS –30 F, NO CRACKS10. WATER ABSORPTION METHOD ASTM D 471 ASTM D 47114 DAYS @ 70 C 14 DAYS @ 70 CRESULTS 1% 1%11. DIMENSIONAL STABILITY METHODAFTER WATERABSORPTIONRESULTS12. HEATING AGING METHOD ASTM D 3045 (160 F/7 DAYS) ASTM D 30457 DAYS @ 160 FRESULTS >90% STRENGTH RETENTION >90% STRENGTH RETENTION13. OZONE RESISTANCE METHOD 3 DAYS @ 100PPHM -- 100F AND 3 DAYS @ 100PPHM -- 100F AND3 DAYS @ 300 PPHM -- 100 F 3 DAYS @ 300 PPHM -- 100 FRESULTS NO CRACKING NO CRACKING14. RESISTANCE TO METHOD CGSB37 - CGSB37 - ASTM D 2565 ASTM D 2565ACCELERATED GP56M GP56M ASTM E 838WEATHERING RESULTS PASS PASS 5,000 HOURS, NO CRACKING 5,000 HOURS, NO CRACKING3 MILLION LANGLEYS15. DYNAMIC IMPACTING METHOD CGSB37 - CGSB37 - ASTM D 5635 ASTM D 5635(PUNCTURING) GP56M GP56MRESULTS PASS PASS 20 JOULES 15 JOULES16 TEAR RESISTANCE METHOD ASTM D 624 ASTM D 624 ASTM D 751 ASTM D 7518 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLERESULTS 165 LBS. 165 LBS. 50 X 50 LBS. 120 X 12017. TEARING STRENGTH METHOD ASTM D 751 ASTM D 7518 IN. X 10 IN. SAMPLE 8 IN. X 10 IN. SAMPLERESULTS 50 X 50 LBS. 120 X 12018. LOW TEMPERATURE METHOD ASTM D 2136, –30 F ASTM D 2136,–30 FIMPACTRESULTS NO CRACKING NO CRACKING19. PERMEABILITY METHOD ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96 PROCEDURE A ASTM E 96, PROCEDURE AWATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSION WATER VAPOR TRANSMISSIONRESULTS 0.136/GRAINS/IN. HG. SQ. FT. 0.136/GRAINS/IN. HG. SQ. FT. 1.3 G/MXM/24H 1.3 G/MXM/24H20. DIMENSIONAL CHANGE METHOD ASTM D 1204 37-GP-54MAFTER STRESSRELAXATION RESULTS 0.005 SHALL NOT CHANGE MORE21. CONE PENETRATION METHOD 37-GP-54M 37-GP-54MRESULTS PASS PASS22. SEE APPENDIX IFCHECKEDXX256

Other Prefabricated Sheet-Applied Membranes Part 2: Test ResultsVERSICO INCORPORATEDVERSIWELD PREMIERTPO THERMOPLASTIC OLEFINASTM D 4120.385 MM MIN0.015 IN. MINASTM 0751 GRAB METHOD1 KN225 LBFHEAT WELDASTM D 75125 TYPICALFABRIC ONLYASTM D 471@ 70 C FOR 166 HOURS+4, –4 ON EXPOSED SURFACEASTM D 573AGE BREAKING STRENGTH1-0 KN225 LBFASTM D 1149PASSASTM G260.70 W/M² ­ 80 C G.P.T.PASSFTM 101C250 MIN - 300 TYPICAL LBFASTM D 751PROCEDURE B55N300 LBFASTM E 960.05 PERMS TYPICAL0.10 PERMS MAXASTM D1204 AT 212 o F+2, –2257

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> Information1. COMPANY NAME ALDO ALDO ALDO ALDOPRODUCTS PRODUCTS PRODUCTS PRODUCTSCO., INC. CO., INC. CO., INC. CO., INC.2. PRODUCT NAME ALDOCOAT ALDOCOAT ALDOCOAT ALDOCOAT374 374 384 384BASE TOP BASE/TOP BASE/TOP3A. COATING DESCRIPTIONAcrylilc X XButylHypalonNeopreneSiliconeUrethane X XVinylModified AsphaltOther (type)3B. VAPOR RETARDER (yes, perm rating 1.0) YES YES YES YES3C. COLORS AVAILABLE GRAY WHITE ALUMINUM4. BASE COATING (Name of Product) ALCOCOAT 374 ALDOCOATGRAY 384TOP COATING (Name of Product) ALDOCOAT 374 ALDOCOATWHITE 3845. NUMBER OF COATING APPLICATIONS REQUIREDBase Coatings 1 1Top Coatings 1 1Granules Required (yes, no or optional) OPTIONAL OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)Base Coating 13 – 15 13 – 15Tom Coating 13 – 15 13 – 157. FILM CURE TIMEBase Coating 8 HOURS 6 HOURSTop Coating 12 HOURS 8 HOURS8. MINIMUM SLOPE REQUIRED (inches per foot) 1/8" 1/8" 1/8" 1/8"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)Concrete Decks X X X XPlywood Decks X X X XMetal Decks X X X XExisting Spudded Built-up <strong>Roofing</strong> P P P POther Coatings X X X X10. FLASHING MATERIAL (type or self-flashing) SELF SELF SELF SELF11. APPLICATION CONDITIONSRecommended Ambient Air Temperature Range (degrees F) 40 – 85 40 – 85 40 – 85 40 – 85Maximum Permitted Wind Velocity Without Screen (mph) 10 10 10 10Maximum Permitted Wind Velocity With Wind Screen (mph) 15 15 15 1512. APPLICATION EQUIPMENT REQUIREMENTSSingle-Component Airless Spray X X X XMulti-Component Airless SprayOther (roller, brush, etc.) ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH13. RESTRICTED REGIONS (yes/none) NONE NONE NONE NONE14. RESTRICTED BUILDING USES (yes/none) YES YES NONE NONE15. RECOMMENDED RECOATING SCHEDULE (years or none) 5 5 5 516. PHYSICAL PROPERTIES OF THE COATINGTensile Strength Per ASTM D 412 or Other (psi) 450 450 950 950Elongation Per ASTM D 412 or Other (%) 315 315 300 300Impact Resistance Per ASTM D 2794 or Other (inch lbs) 160 160 160 160Accelerated Weathering Per ASTM D 882 or Other (color change) NO CHANGE NO CHANGEHeat Aging Per ASTM D 573 or Other (%)Water Absorption Per ASMT D 570 or Other (%) 0.5 MAX 0.5 MAX 0.3 MAX 0.3 MAX17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES YES18. FOAM INSULATION REQUIREMENTSMinimum Thickness (inches) 1 1 1 1Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 – 3.5 2.5 – 3.5 2.5 – 3.5 2.5 – 3.5Compressive Strength Per ASTM D 1621 or Other (psi) 40 MIN. 40 MIN. 40 40Closed Cell Content Per ASTM D 2856 or Other (%) 90 MIN. 90 MIN. 90 9019. FOAM AVAILABLE FROM MANUFACTURER (yes/no) NO NO NO NO20. YEAR OF FIRST COMMERCIAL USE 1980 1980 1980 198021. NUMBER OF SQUARES INSTALLED (100 ft 2 ) 100,000 100,000 100,000 100,00022. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) YES YES YES YES23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT24. NUMBER OF REGIONAL SERVICE LOCATIONS 5 525. FOR SALES INFORMATION, CONTACT: R. BRENK R. BRENK R. BRENK R. BRENKFOR TECHNICAL INFORMATION, CONTACT: W. KRAMER W. KRAMER W. KRAMER W. KRAMER26. SEE APPENDIX IF CHECKEDNA=not applicable258

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationANDEK ANDEK ANDEK ANDEK ANDEK CONKLIN CONKLIN CONKLIN CONKLINCORP. CORP. CORP. CORP. CORP. CO., INC. CO., INC. CO., INC. CO., INC.R.A.C. R.A.C. OZ POLAROOF NW POLAROOF AC POLAROOF RAPID ROOF II RAPID ROOF III POLYTUFF II POLYTUFF IIFIREGARD BASE COAT TOP COAT BASE COAT TOP COATX X XXX X XETHYLENE ELASTOMERPVCNO NO YES NO NO NO NO YES YESSILVER SILVER ANY COLOR ANY COLOR ANY COLOR TAN WHITE, TAN, SILVER, GRAY WHITEGRAYR.A.C. R.A.C. OZ POLAROOF NW POLAROOF AC POLARROOF RAPID ROOF III POLYTUFF IIFIREGARD BASE COAT BASE COATR.A.C. R.A.C. OZ POLAROOF NW POLAROOF AC POLAROOOF RAPID ROOF III POLYTUFF IIFIREGARD TOP COAT TOP COAT1 1 1 1 1 1 11 1 1 1 1 1 1NO NO NO NO NO OPTIONAL NO NO15 15 12 15 10 13 16.015 15 12 15 10 12 4.08 HOURS 8 HOURS 14 2 1 HOUR 2 – 8 HOURS 2 – 4 HOURS8 HOURS 8 HOURS 16 1 1 HOUR 2 – 8 HOURS 30 MINSNONE NONE NONE 2 1/4" 1/4" 1/4" 1/4" 1/4"X X P P P P P P PP P P P P P P P PX X X X X X X X XX X X X X X X X XX X X X XSELF SELF SELF SELF SELF SELF SELF SELF SELF30 – 100 20 – 100 0 – 90 45 – 90 45 50 – 100 50 – 100 40 – 100 40 – 10010 10 10 10 10 15 15 15 1515 15 15 15 15 25 25 25 25X X X X X X X X XROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER ROLLER ROLLER ROLLERNONE NONE NONE NONE NONE NONE NONE NONE NONENONE NONE YES YES NONE YES YES NONE NONE10 10 10 10 10 10+ 10+ 10+ 10+620 1400 864 250 520 67 201 1400 1400570 570 550 500 1000 377 262 630 630210 630 280 120 140 160 160 160 160NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGENONE NONE NONE NONE NONENONE NONE NONE 1.3% 2.5%YES YES NO YES YES YES YES YES YES1 1 2 1 1 1 1 1 12.5 – 3.5 2.5 – 3.5 2.5 – 3.5 2.5 – 3.5 2.5 - 3.5 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.040 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN.90 MIN. 90 MIN. 90 MIN. 90 MIN. 40 MIN. 90 MIN. 90 MIN. 90 MIN. 90 MIN.NO NO NO NO NO NO NO NO NO1978 1988 1985 1996 1975 1994 1994 1982 1982340,000 60,000 65,000 40,000 10,000 >1,000,000 >1,000,000 > 150,000 > 150,000YES YES YES YES YES NO NO NO NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS5 5 5 5 5 5 5 5 5HARVEY LISS HARVEY LISS HARVEY LISS HARVEY LISS HARVEY LISS BUILD. PRODS. BUILD. PRODS. BUILD. PRODS. BUILD. PRODS.800/800-2844 800/800-2844 800/800-2844 800/800-2844 800/800-2844 800/888-8838 800/888-8838 800/888-8838 800/888-8838NEIL SHEARER NEIL SHEARER NEIL SHEARER NEIL SHEARER NEIL SHEARER BUILD. PRODS. BUILD. PRODS. BUILD. PRODS. BUILD. PRODS.888/882-6335 888/882-6235 888/882-6235 888/882-6235 888/882-6235 800/888-8838 800/888-8838 800/888-8838 800/888-8838X X X259

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationCONKLIN 1. COMPANY NAME CONKLIN DOW ERSYSTEMSCO., INC. CO., INC. CORNINGCORP.BENCHMARK 2. PRODUCT NAME BENCHMARK DOW CORNING ERATHANEBASE COAT TOP COAT 3-5000 SILICONE 300ROOF COATING BASE3A. COATING DESCRIPTIONX Acrylilc XButylHypalonNeopreneSiliconeXUrethaneXVinylModified AsphaltOther (type)YES 3B. VAPOR RETARDER (yes, perm rating 1.0) YES NOBLUE 3C. COLORS AVAILABLE WHITE, GRAY DK GRAY, GRAY, GRAYWHITE, BEIGEBENCHMARK 4. BASE COATING (Name of Product) SAME ERATHANE 300BASE COATTOP COATING (Name of Product) BENCHMARK SAME ERATHANE 300TOP COAT5. NUMBER OF COATING APPLICATIONS REQUIRED1 Base Coatings 1 1Top Coatings 1Granules Required (yes, no or optional) OPTIONAL OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)13.5 Base Coating 8 – 10 25Tom Coating 13.5 7 – 107. FILM CURE TIME2 – 8 HOURS Base Coating 2 – 6 HOURS 24 HRS @ 75FTop Coating 2 – 8 HOURS 2 – 6 HOURS1/4" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/4" NO PONDING 1/8"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P Concrete Decks P P XP Plywood Decks P X XX Metal Decks X X XX Existing Spudded Built-up <strong>Roofing</strong> X X XOther Coatings X XSELF 10. FLASHING MATERIAL (type or self-flashing) SELF SELF SELF11. APPLICATION CONDITIONS50 – 100 Recommended Ambient Air Temperature Range (degrees F) 50 – 100 >32 40+15 Maximum Permitted Wind Velocity Without Screen (mph) 15 10 725 Maximum Permitted Wind Velocity With Wind Screen (mph) 25 25 2512. APPLICATION EQUIPMENT REQUIREMENTSX Single-Component Airless Spray X X XMulti-Component Airless SprayROLLER Other (roller, brush, etc.) ROLLERNONE 13. RESTRICTED REGIONS (yes/none) NONE NONE NONENONE 14. RESTRICTED BUILDING USES (yes/none) NONE YES YES10+ 15. RECOMMENDED RECOATING SCHEDULE (years or none) 10+ NONE NONE16. PHYSICAL PROPERTIES OF THE COATING325 Tensile Strength Per ASTM D 412 or Other (psi) 476 400 975375 Elongation Per ASTM D 412 or Other (%) 118 150 825160 Impact Resistance Per ASTM D 2794 or Other (inch lbs) 160NO CHANGE Accelerated Weathering Per ASTM D 882 or Other (color change) NO CHANGE NONE NO CHANGEHeat Aging Per ASTM D 573 or Other (%)NO CHANGE1,000,000 MILLIONS THOUSANDSNO 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) NO YES YESDISTRIBUTORS 23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRIBUTORS DIRECT DISTRS, DIRECT5 24. NUMBER OF REGIONAL SERVICE LOCATIONS 5 7 14BUILD. PRODS. 25. FOR SALES INFORMATION, CONTACT: BUILD. PRODS. PROD INFORM. J. LEONARD800/888-8838 800/888-8838 517/496–6000 800/403-7747BUILD. PRODS. FOR TECHNICAL INFORMATION, CONTACT: BUILD. PRODS. B. SWISHER J. LEONARD800/888-8838 800/888-8838 770/751–7979 800/403-7747X 26. SEE APPENDIX IF CHECKED XNA=not applicableBASE260

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS GACO GACO GACOWESTERN WESTERN WESTERNINC. INC. INC.ERATHANE ERAGUARD ERATHANE ERAGUARD ERATHANE ERAKOTE URECAP URESHIELD URECAP300 4000 300 1000 300BASEXXX X X X X X XYES YES YESGRAY GRAY AND WHITE GRAY WHITE AND GRAY WHITE AND GRAY, BLACK, ALUMINUM BLACKCUSTOM CUSTOM ALUMINUMERAGUARD ERATHANE ERAGUARD ERATHANE 300 URECAP URESHIELD SAME4000 300 1000 BASEERATHANE 300 ERAGUARD ERATHANE ERAGUARD ERAKOTE URECAP URESHIELD URESHIELD4000 300 10001 1 1 1 2 2 11 1 1 1 1 1 1OPTIONAL OPTIONAL OPTIONAL OPTIONAL NO NO NO NO11 16 16 MIN. 25 22 22 2210 11 16 16 MIN. 7 14 144 HRS @ 70F 12 HRS @ 75F 24 HRS @ 70F 24 HRS. @ 75F 12 HOURS 12 HOURS 12 HOURS12 HRS @ 75F 4 HRS @ 70F 12 HRS @ 75F 24 HRS @ 70F 6 HRS. @ 75F 12 HOURS 12 HOURS1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4"X X X X X X P P PX X X X X X P P PX X X X X X P P PX P X X X X X X XX X X X X P P PSELF SELF SELF SELF SELF SELF SELF SELF SELF40+ 40+ 40+ 40+ 40+ 40+ 40 – 100 40 – 100 40 – 1007 5 7 7 7 7 15 15 1525 25 25 25 25 25 25 25 25X X X X X X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONEYES YES YES YES YES YES YES YES YESNONE NONE NONE NONE NONE NONE NONE NONE NONE660 450 660 250 975 1500 2200 1600 1000200 200 200 300 825 350 350 400 350NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGEYES YES YES YES YES YES YES YES YES1 1 1 1 1 1 1 1 12.5 2.5 2.5 2.5 2.5 2.5 2.4 – 3.2 2.4 – 3.2 2.4 – 3.240 40 40 MIN. 40 MIN. 40 MIN. 40 MIN. 43 – 58 43 – 58 43 – 5890 90 90 90 90 90 90 – 91 90 – 91 90 – 91YES YES YES YES YES YES YES YES1979 1981 1979 1982 1993 1979 1988 1974 1989THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDS THOUSANDSYES YES YES YES YES YES NO NO NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT14 14 14 14 14 14 3 3 3J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. FREEMESSER J. FREEMESSER J. FREEMESSER800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/869-0958 800/869-0958 800/869-0958J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD A. JENKINS A. JENKINS A. JENKINS800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/403-7747 800/456–4226 800/456–4226 800/456–4226X X X261

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationGACO GACO 1. COMPANY NAME GACO GACOWESTERN WESTERN WESTERN WESTERNINC. INC. INC. INC.URESHIELD URECAP 2. PRODUCT NAME URECAP A-55113A. COATING DESCRIPTIONAcrylilcXButylHypalonNeopreneSiliconeX X Urethane XVinylModified AsphaltOther (type)YES YES 3B. VAPOR RETARDER (yes, perm rating 1.0) YES NOALUMINUM BLACK 3C. COLORS AVAILABLE GRAY, BLACK, GRAYALUMINUMURECAP SAME 4. BASE COATING (Name of Product) URECAP SAMESAME URECAP TOP COATING (Name of Product) SAME A-55005. NUMBER OF COATING APPLICATIONS REQUIRED1 Base Coatings 21 Top Coatings 1NO NO Granules Required (yes, no or optional) NO NO6. REQUIRED DRY FILM THICKNESS: (mils)22 Base Coating 2210 Tom Coating 147. FILM CURE TIME12 HOURS Base Coating 18 HOURS12 HOURS Top Coating 12 HOURS1/4" 1/4" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/4" 1/4"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P P Concrete Decks P PP P Plywood Decks P PP P Metal Decks P PX X Existing Spudded Built-up <strong>Roofing</strong> X XP P Other Coatings P PSELF SELF 10. FLASHING MATERIAL (type or self-flashing) SELF SELF11. APPLICATION CONDITIONS40 – 100 40 – 100 Recommended Ambient Air Temperature Range (degrees F) 40 – 100 50 – 10015 15 Maximum Permitted Wind Velocity Without Screen (mph) 15 1525 25 Maximum Permitted Wind Velocity With Wind Screen (mph) 25 2512. APPLICATION EQUIPMENT REQUIREMENTSX X Single-Component Airless Spray X XMulti-Component Airless SprayOther (roller, brush, etc.)NONE NONE 13. RESTRICTED REGIONS (yes/none) NONE NONEYES YES 14. RESTRICTED BUILDING USES (yes/none) YES YESNONE NONE 15. RECOMMENDED RECOATING SCHEDULE (years or none) NONE NONE16. PHYSICAL PROPERTIES OF THE COATING1600 1000 Tensile Strength Per ASTM D 412 or Other (psi) 2200 225400 350 Elongation Per ASTM D 412 or Other (%) 350 200Impact Resistance Per ASTM D 2794 or Other (inch lbs)Accelerated Weathering Per ASTM D 882 or Other (color change)Heat Aging Per ASTM D 573 or Other (%)Water Absorption Per ASMT D 570 or Other (%)YES YES 17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES18. FOAM INSULATION REQUIREMENTS1 1 Minimum Thickness (inches) 1 12.4 – 3.2 2.4 – 3.2 Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.4 – 3.2 2.4 – 3.243 – 58 43 – 58 Compressive Strength Per ASTM D 1621 or Other (psi) 43 – 58 43 – 5890 – 91 90 – 91 Closed Cell Content Per ASTM D 2856 or Other (%) 90 – 91 90 – 91YES YES 19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) YES YES1974 1989 20. YEAR OF FIRST COMMERCIAL USE 1988 197821. NUMBER OF SQUARES INSTALLED (100 ft 2 )NO NO 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) NO NODISTRS, DIRECT DISTRS, DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT3 3 24. NUMBER OF REGIONAL SERVICE LOCATIONS 3 3J. FREEMESSER J. FREEMESSER 25. FOR SALES INFORMATION, CONTACT: J. FREEMESSER J. FREEMESSER800/869-0958 800/869-0958 800/869-0958 800/869-0958A. JENKINS A. JENKINS FOR TECHNICAL INFORMATION, CONTACT: A. JENKINS A. JENKINS800/456–4226 800/456–4226 800/456–4226 800/456–4226X X 26. SEE APPENDIX IF CHECKED X XNA=not applicable262

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationGACO GACO GACO GACO GACO GACO GACO GACO GACOWESTERN WESTERN WESTERN WESTERN WESTERN WESTERN WESTERN WESTERN WESTERNINC. INC. INC. INC. INC. INC. INC. INC. INC.A-5500 URECAP A-5500 UB-64 UA-6500 UB-64 A-5500 URECAP UA-6500X X XX X X X X XNO YES NO YES YES YES NO YES YESWHITE BLACK WHITE GRAY WHITE GRAY WHITE BLACK WHITEA-5511 SAME URECAP SAME UB-64 SAME UB-64 SAME URECAPSAME A-5500 SAME UA-6500 SAME UA-5500 SAME UA-6500 SAME1 2 2 11 1 1 1 1NO NO NO NO NO NO NO NO NO22 22 22 229.5 9.5 12 9.5 1212 HOURS 12 HOURS 12 HOURS 12 HOURS18 HOURS 18 HOURS 24 HOURS 18 HOURS 24 HOURS1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"P P P P P P P P PP P P P P P P P PP P P P P P P P PX X X X X X X X XP P P P P P P P PSELF SELF SELF SELF SELF SELF SELF SELF SELF50 – 100 40 – 100 50 – 100 40 – 100 40 – 100 40 – 100 50 – 100 40 – 100 40 – 10015 15 15 15 15 15 15 15 1525 25 25 25 25 25 25 25 25X X X X X X X X XX X X XNONE NONE NONE NONE NONE NONE NONE NONE NONEYES YES YES YES YES YES YES YES YESNONE NONE NONE NONE NONE NONE NONE NONE NONE225 1000 225 2500 2700 2500 225 1000 2700200 350 200 450 250 450 200 350 2502.0 2.8 2.0 2.8YES YES YES YES YES YES YES YES YES1 1 1 1 1 1 1 1 12.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.2 2.4 – 3.243 – 58 43 – 58 43 – 58 43 – 58 43 – 58 43 – 58 43 – 58 43 – 58 43 – 5890 – 91 90 – 91 90 – 91 90 – 91 90 – 91 90 – 91 90 – 91 90 – 91 90 – 91YES YES YES YES YES YES YES YES YES1978 1989 1978 1984 1977 1984 1978 1989 1977NO NO NO NO NO NO NO NO NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT3 3 3 3 3 3 3 3 3J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS800/456–4226 800/456–4226 800/456–4226 800/456–4226 800/456–4226 800/456–4226 800/456–4226 800/456–4226 800/456–4226X X X X X X X X X263

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationGACO GACO GACO 1. COMPANY NAME GACOWESTERN WESTERN WESTERN WESTERNINC. INC. INC. INC.UB-7050 URESHIELD UB-7050 2. PRODUCT NAME UA-65003A. COATING DESCRIPTIONAcrylilcButylHypalonNeopreneSiliconeX X X Urethane XVinylModified AsphaltOther (type)YES YES YES 3B. VAPOR RETARDER (yes, perm rating 1.0) YESOLIVE ALUMINUM OLIVE 3C. COLORS AVAILABLE WHITESAME UB-7050 SAME 4. BASE COATING (Name of Product) UB-7050URESHIELD SAME UA-6500 TOP COATING (Name of Product) SAME5. NUMBER OF COATING APPLICATIONS REQUIRED1 1 Base Coatings1 Top Coatings 1NO NO NO Granules Required (yes, no or optional) NO6. REQUIRED DRY FILM THICKNESS: (mils)22 22 Base Coating10 Tom Coating 107. FILM CURE TIME0.50 HR 0.50 HR Base Coating12 HOURS Top Coating 24 HOURS1/4" 1/4" 1/4" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/4"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P P P Concrete Decks PP P P Plywood Decks PP P P Metal Decks PX X X Existing Spudded Built-up <strong>Roofing</strong> XP P P Other Coatings PSELF SELF SELF 10. FLASHING MATERIAL (type or self-flashing) SELF11. APPLICATION CONDITIONS50 – 100 40 – 100 50 – 100 Recommended Ambient Air Temperature Range (degrees F) 40 – 10015 15 15 Maximum Permitted Wind Velocity Without Screen (mph) 1525 25 25 Maximum Permitted Wind Velocity With Wind Screen (mph) 2512. APPLICATION EQUIPMENT REQUIREMENTSX Single-Component Airless Spray XX X Multi-Component Airless Spray XOther (roller, brush, etc.)NONE NONE NONE 13. RESTRICTED REGIONS (yes/none) NONEYES YES YES 14. RESTRICTED BUILDING USES (yes/none) YESNONE NONE NONE 15. RECOMMENDED RECOATING SCHEDULE (years or none) NONE16. PHYSICAL PROPERTIES OF THE COATING2900 1600 2900 Tensile Strength Per ASTM D 412 or Other (psi) 2700190 400 190 Elongation Per ASTM D 412 or Other (%) 250Impact Resistance Per ASTM D 2794 or Other (inch lbs)Accelerated Weathering Per ASTM D 882 or Other (color change)Heat Aging Per ASTM D 573 or Other (%)2.5 2.5 Water Absorption Per ASMT D 570 or Other (%) 2.8YES YES YES 17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES18. FOAM INSULATION REQUIREMENTS1 1 1 Minimum Thickness (inches) 12.4 – 3.2 2.4 – 3.2 2.4 – 3.2 Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.4 – 3.243 – 58 43 – 58 43 – 58 Compressive Strength Per ASTM D 1621 or Other (psi) 43 – 5890 – 91 90 – 91 90 – 91 Closed Cell Content Per ASTM D 2856 or Other (%) 90 – 91YES YES YES 19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) YES1990 1974 1990 20. YEAR OF FIRST COMMERCIAL USE 197721. NUMBER OF SQUARES INSTALLED (100 ft 2 )YES NO YES 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT3 3 3 24. NUMBER OF REGIONAL SERVICE LOCATIONS 3J. FREEMESSER J. FREEMESSER J. FREEMESSER 25. FOR SALES INFORMATION, CONTACT: J. FREEMESSER800/869-0958 800/869-0958 800/869-0958 800/869-0958A. JENKINS A. JENKINS A. JENKINS FOR TECHNICAL INFORMATION, CONTACT: A. JENKINS800/456–4226 800/456–4226 800/456–4226 800/456–4226X X X 26. SEE APPENDIX IF CHECKED XNA=not applicable264

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationGACO GACO GACO GACO GARDNER GARDNER GARDNER G.E. SILICONES G.E. SILICONESWESTERN WESTERN WESTERN WESTERN ASPHALT CORP/ ASPHALT CORP/ ASPHALT CORP/ DIV OF GENERAL DIV OF GENERALINC. INC. INC. INC. APOC DIVISION APOC DIVISION APOC DIVISION ELECTRIC ELECTRICUB-7050 A-5500 UB-64 U-66 APOC #252 GARDNER APOC #337 SCM 3308 SCM 3304SUN-WHITE ELASTOMERIC BASE COAT TOP COATELASTOMERIC ROOF COATINGXXX X X XX X XXYES NO YES YES YES YES YES NO NOOLIVE WHITE GRAY SIX STANDARD WHITE, TAN, WHITE BLACK DARK GRAY MEDIUM GRAYRED, GRAYSAME UB-7050 SAME UB-64 APOC #252 GARDNER WHITE APOC #337 SCM3308ROOF COATING ROOF PATCH BASE COATA-5500 SAME U-66 SAME APOC #252 SAME APOC #252SCM3304 TOP COATROOF COATING1 2 1 1 1 11 1 1 2 1 1NO NO NO NO NO NO YES YES22 22 8 – 10 10 – 12 10 – 12 10-129.5 10 8 – 10 10 – 12 8 – 10 10-120.50 HR 12 HOURS 4 – 6 HOURS 4 – 6 HOURS 4 – 6 HOURS 20 MINS.18 HOURS 18 HOURS 4 – 6 HOURS 4 – 6 HOURS 4 – 6 HOURS 1 HR1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/8" 1/8"P P P P P P PP P P P T T TP P P P X X XX X X X P P PP P P P X X X X XSELF SELF SELF SELF SELF SELF50 – 100 50 – 100 40 – 100 40 – 100 50 – 100 50 – 90 60 – 100 40 MIN. 40 MIN.15 15 15 15 10 10 15 10 1025 25 25 25 15 15 15 15 15X X X X X XX X X X X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONEYES YES YES YES NONE NONE NONE YES YESNONE NONE NONE NONE 5 5 5 NONE NONE2900 225 2600 1400 250 – 300 250 – 300 150 500 – 600 500 – 600190 200 300 450 250 – 300 250 – 300 150 – 200 100 – 150 100 – 150NO CHANGE NO CHANGE NO CHANGE NONE NONENONENONE2.5 2.0 2.0

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationG.E. SILICONES G.E. SILICONES NATIONAL NEOGARD, A 1. COMPANY NAMEDIV OF GENERAL DIV OF GENERAL COATINGS DIVISION OFELECTRIC ELECTRIC CORP. JONES-BLAIR CO. JONES-BLAIR CO.SCM 3408 SCM 3404 ACRYSHIELD PERMATHANE II 2. PRODUCT NAMEBASE COAT TOP COAT FRBASE COAT3A. COATING DESCRIPTIONXAcrylilcButylHypalonNeopreneX X SiliconeXUrethaneVinylModified AsphaltOther (type)NO NO NO 3B. VAPOR RETARDER (yes, perm rating 1.0)DARK GRAY MEDIUM GRAY GRAY, OFF-WHITE, GRAY 3C. COLORS AVAILABLEWHITE, CUSTOMSCM3408 ACRYSHIELD PERMATHANE II 4. BASE COATING (Name of Product)BASE COATSCM 3404 ACRYSHIELD TOP COATING (Name of Product)TOP COATFR5. NUMBER OF COATING APPLICATIONS REQUIRED1 1-2 Base Coatings1 Top CoatingsOPTIONALGranules Required (yes, no or optional)6. REQUIRED DRY FILM THICKNESS: (mils)10 – 12 12 26 Base Coating10 – 12 12 Tom Coating7. FILM CURE TIME.5 – 2 HOURS 2 – 8 HOURS 8-12 HOURS Base Coating.5 – 2 HOURS 2 – 8 HOURS Top Coating1/8" 1/8" 1/8" NONE 8. MINIMUM SLOPE REQUIRED (inches per foot)9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)PConcrete DecksPPlywood DecksXMetal DecksPExisting Spudded Built-up <strong>Roofing</strong>X X X Other CoatingsSELF SELF 10. FLASHING MATERIAL (type or self-flashing)11. APPLICATION CONDITIONS40 MIN. 40 MIN. 50 – 110 40 – 110 Recommended Ambient Air Temperature Range (degrees F)10 10 15 15 Maximum Permitted Wind Velocity Without Screen (mph)15 15 25 25 Maximum Permitted Wind Velocity With Wind Screen (mph)12. APPLICATION EQUIPMENT REQUIREMENTSX X X X Single-Component Airless SprayMulti-Component Airless SprayX X ROLLER X Other (roller, brush, etc.)NONE NONE NONE NONE 13. RESTRICTED REGIONS (yes/none)YES YES YES YES 14. RESTRICTED BUILDING USES (yes/none)NONE NONE 10 10+ 15. RECOMMENDED RECOATING SCHEDULE (years or none)16. PHYSICAL PROPERTIES OF THE COATING200 200 646 1000 Tensile Strength Per ASTM D 412 or Other (psi)400 400 402 375 Elongation Per ASTM D 412 or Other (%)160 Impact Resistance Per ASTM D 2794 or Other (inch lbs)NO CHANGEAccelerated Weathering Per ASTM D 882 or Other (color change)N./A Heat Aging Per ASTM D 573 or Other (%) 100,000 21. NUMBER OF SQUARES INSTALLED (100 ft 2 )YES YES YES YES 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no)DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct)10 10 5 8 24. NUMBER OF REGIONAL SERVICE LOCATIONSW. BILINSKI W.BILINSKI D. VARAIS ROOFING SALES 25. FOR SALES INFORMATION, CONTACT:770/662-1083 770/662-1083 805/388–7112 800/321–6588J. LINDYBERG J. LINDYBERG TECHNICAL DEPT. TECHNICAL DEPT. FOR TECHNICAL INFORMATION, CONTACT:518/233-2313 518/233-2313 805/388–7112 800/321–6588X X 26. SEE APPENDIX IF CHECKEDNA=not applicable266

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationNEOGARD, A NEOGARD, A NEOGARD, A NEOGARD, A NEOGARD, A NEOGARD, A NEOGARD, A PLASTIC PLASTICDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF COATINGS COATINGSJONES-BLAIR CO. JONES-BLAIR CO. JONES-BLAIR CO. JONES-BLAIR CO. JONES-BLAIR CO. JONES-BLAIR CO. JONES-BLAIR CO. CORP. CORP.PERMATHANE II PERMATHANE PERMATHANE ELASTACRYL SILICONE PERMA-SIL PERMA-SIL JAXSAN 600 JAXSAN 601FR FR FR FR FR TC FR TC FRTOP COAT BASE COAT TOP COATX X XX XX X X XNO NO NO NO NO NO NO NOGRAY, WHITE, BLACK GRAY, WHITE, GRAY, WHITE GRAY, WHITE, BLACK GRAY, WHITE, WHITE, GRAY, BRITE WHITETAN TAN TAN TAN TAN SPECIAL COLORSPERMAGARD ELASTACRYL SILICONE FR PERMAGARD JAXSAN 600 JAXSAN 601FR FR TC FRPERMATHANE II URETHANE R ELASTACRYL SILICONE FR SILICONE FR JAXSAN 600 JAXSAN 601FRFR2 1 – 2 1 OR 2 1 OR 21 2 2-3 2-3 1OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL26 24 15 – 20 15 – 2013 12 27 30 16 15 – 20 15 – 208-12 HOURS 8-12 HOURS 1 – 3 HOURS 2 – 4 HOURS8-12 HOURS 8-12 HOURS 8-12 HOURS 2-4 HOURS 2-4 HOURS 1 – 3 HOURS 2 – 4 HOURSNONE NONE NONE 1/2" 1/2" 1/4" 1/4" NONPONDING NONPONDINGPPPPPPXXXXSELF SELF SELF SELF SELF SELF SELF SELF SELF40 – 110 40 – 110 40 – 110 60 – 110 40 – 110 40 – 110 40 – 110 50+ 50+15 15 15 15 15 15 15 15 1525 25 25 25 25 25 25 25 25X X X X X X X X XXX X X X X X XNONE NONE NONE NONE NONE NONE NONE NONE NONEYES YES YES YES YES YES YES YES YES10+ NONE 10+ 10+ 10+ NONE 10+ 10 + 10 +1500 400 2500 125 350 275 350 375 375360 500 450 300 200 500 200 200 + 200 +160 160 160 160 160 160 160 98 98N/A SLIGHT SLIGHT SLIGHT N/A SLIGHT NO CHANGE NO CHANGESLIGHT 100,000 > 100,000 > 50,000 8,000 8,000 > 6 MILLION > 6 MILLIONYES YES YES YES YES YES YES NO NODIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DISTRS, DIRECT DISTRS, DIRECT8 8 8 8 8 8 8 10 10ROOFING SALES ROOFING SALES ROOFING SALES ROOFING SALES ROOFING SALES ROOFING SALES ROOFING SALES L. WIDDECOMBE III L. WIDDECOMBE III800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588TECHNICAL DEPT. TECHNICAL DEPT. TECHNICAL DEPT. TECHNICAL DEPT. TECHNICAL DEPT. TECHNICAL DEPT. TECHNICAL DEPT. G. WIDDECOMBE G. WIDDECOMBE800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588 800/321–6588267

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationPLASTIC POLYDYNE POLYDYNE POLYDYNE POLYDYNE 1.COATINGSCORP.JAXSAN 607 AQUADYNE UREDYNE UREDYNE UREDYNE 2.50-0771 30-8000 30-0102 30-8000X3A.X X XMOISTURE CURENO YES YES YES 3B.WHITE, GRAY, GRAY AMBER STRAW, GRAY AMBER 3C.SPECIAL COLORSJAXSAN 607 SAME AQUADYNE SAME UREDYNE 4.50-0771 30-0102JAXSAN 607 UREDYNE SAME UREDYNE UREDYNE30-8000 30-8000 30-80001 2 11 1 1OPTIONAL15 – 20 18-24 18 – 2415 – 20 10-12 10 – 127.1 – 4 HOURS 6 HOURS 4 HOURS1 – 4 HOURS 4 HOURS 4 HOURSNONPONDING 1/4" 1/4" 1/4" 1/4" 8.5.6.9.P P P P PPX P P P PXX P P P PSELF SELF SELF SELF SELF 10.50+ 75 75 75 751525X X X X XXNONE NONE NONE NONE NONE 13.YES NONE NONE NONE NONE 14.10 – 15 15.320 450 – 600 2500 1700 2500240 300 – 400 500 300 – 350 500NO CHANGE10 D-471: 1.5 D-471: 1.5 1.5 1.5YES YES YES YES YES 17.18.1 1 1 1 12.5 - 3.0 2.5 2.5 2.5 2.52.5 38 38 38 3890 90 90 90NO NO NO NO NO 19.1995 1986 1986 1986 1986 20.>2 MILLION 21.NO NO NO NO NO 22.DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT 23.10 7 7 7 7 24.L. WIDDECOMBE III R. EWALD R. EWALD R. EWALD R. EWALD 25.11.12.16.G. WIDDECOMBE T. MEYER T. MEYER T. MEYER T. MEYERR. EWALD R. EWALD R. EWALD R. EWALD26.268

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationCOMPANY NAME POLYDYNE POLYDYNE POLYDYNE POLYDYNE POLYDYNEPRODUCT NAME UREDYNE ACRYDYNE AQUADYNE POLY SIL POLY PERM30-0750 40-0226 50-0771 20-0200 60-0003COATING DESCRIPTIONAcrylilc X XButylXHypalonNeopreneSiliconeXUrethane XVinylModified AsphaltOther (type)VAPOR RETARDER (yes, perm rating 1.0) NO NO YESCOLORS AVAILABLE BURGUNDY WHITE GRAY LIGHT/DARK GRAY. BLACKWHITEBASE COATING (Name of Product) SAME UREDYNE AQUADYNE POLY SIL POLY PERM30-0750 50-0771 208 60-0003TOP COATING (Name of Product) ACRYDYNE SAME AQUADYNE POLY SIL POLY PERM40-0216 50-0771 208 60-0003NUMBER OF COATING APPLICATIONS REQUIREDBase Coatings 1 1 1 1 – 2Top Coatings 1 2 1 NAGranules Required (yes, no or optional)OPTIONALREQUIRED DRY FILM THICKNESS: (mils)Base Coating 18 – 24 18 – 24 15 20+Tom Coating 10 – 14 18 – 24 10FILM CURE TIMEBase Coating 2 – 4 MIN. 2 – 4 MIN. 1 HR 24 HOURSTop Coating 4 1/2 HOURS 6 HOURS 1 HRMINIMUM SLOPE REQUIRED (inches per foot) 0 1" 1/4" 0 1" – 12"REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)Concrete Decks P P P P XPlywood Decks P P P XMetal Decks P P P P XExisting Spudded Built-up <strong>Roofing</strong> P P P XOther Coatings P P P P XFLASHING MATERIAL (type or self-flashing) SELF SELF SELF SELFAPPLICATION CONDITIONSRecommended Ambient Air Temperature Range (degrees F) 70 70 70 75 70Maximum Permitted Wind Velocity Without Screen (mph) 15 15Maximum Permitted Wind Velocity With Wind Screen (mph) 30 30APPLICATION EQUIPMENT REQUIREMENTSSingle-Component Airless Spray X X X XMulti-Component Airless SprayXOther (roller, brush, etc.) ROLLER, BRUSHRESTRICTED REGIONS (yes/none) NONE NONE NONE NONE NONERESTRICTED BUILDING USES (yes/none) NONE NONE NONE NONE NONERECOMMENDED RECOATING SCHEDULE (years or none)PHYSICAL PROPERTIES OF THE COATINGTensile Strength Per ASTM D 412 or Other (psi) 3200±200 200 450 – 600 700 200Elongation Per ASTM D 412 or Other (%) 125 300 – 400 150 180Impact Resistance Per ASTM D 2794 or Other (inch lbs) 300 – 400 280 NAAccelerated Weathering Per ASTM D 882 or Other (color change) NA NAHeat Aging Per ASTM D 573 or Other (%)NAWater Absorption Per ASMT D 570 or Other (%) D-471: 1.5 D-411:1.5 0.5%UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES YES NOFOAM INSULATION REQUIREMENTSMinimum Thickness (inches) 1 1 1 1 1Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 2.5 2.5 2.5 2.5Compressive Strength Per ASTM D 1621 or Other (psi) 50 50 40 40 40Closed Cell Content Per ASTM D 2856 or Other (%) 90 90 40 90 90FOAM AVAILABLE FROM MANUFACTURER (yes/no) NO NO NO NO NOYEAR OF FIRST COMMERCIAL USE 1986 1986 1986 1992 1992NUMBER OF SQUARES INSTALLED (100 ft 2 )MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) NO NO NO YES YESMETHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECTNUMBER OF REGIONAL SERVICE LOCATIONS 7 7 7 7 7FOR SALES INFORMATION, CONTACT: R. EWALD R. EWALD R. EWALD R. EWALD R. EWALDFOR TECHNICAL INFORMATION, CONTACT: T. MEYER T. MEYER T. MEYER T. MEYER T. MEYERR. EWALD R. EWALD R. EWALD R. EWALD R. EWALDSEE APPENDIX IF CHECKEDNA=not applicable269

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationPOLYTHANE POLYTHANE POLYTHANE QUANTUM QUANTUM QUANTUM QUANTUM QUANTUM QUANTUMSYSTEMS, INC SYSTEMS INC. SYSTEMS, INC COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC.GE SILICONES EVEREST EVEREST FUTURA-THANE FUTURA-FLEX FUTURA-THANE FUTURA-THANE FUTURA-THANE FUTURA-THANEACRYLIC HIGH PERFORM 5007 550 5600 5650 5600 5625ACRYLICXXXX X X X X XNO NO NO YES YES YES YES YES YESANY COLOR ANY COLOR ANY COLOR GRAY WHITE, BUFF WHITE BUFF ALUMINUMOTHER COLORSSCM3408 EVERCOAT EVERCOAT SAME FUTURA-THANE SAME FUTURA-THANE SAME FUTURA-THANE510 5410 5007 5600 5600SCM3404 EVERCOAT EVERCOAT FUTURA-THANE SAME FUTURA-THANE SAME FUTURA-FLEX SAME500 5400 550 5650 56251 1 1 1 1 – 2 1 – 21 1 1 1 1 1YES OPTIONAL OPTIONAL NO NO NO NO NO NO20 30 30 20 – 40 20 – 24 20 – 2610 10 – 15 10 – 201 HR 1 HR 1 HR

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> Information1. COMPANY NAME QUANTUM QUANTUM QUANTUM QUANTUMCOATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC.2. PRODUCT NAME FUTURA-THANE ELASTO-BOND FUTURA-FLEX ELASTO-BOND516 801 550 8203A. COATING DESCRIPTIONAcrylilcButylXHypalonNeopreneSiliconeXUrethane X XVinylModified AsphaltOther (type)3B. VAPOR RETARDER (yes, perm rating 1.0) YES YES YES NO3C. COLORS AVAILABLE GRAY BLACK, GRAY WHITE, DARK GRAY,OTHER COLORS LIGHT GRAY4. BASE COATING (Name of Product) SAME SAME ELASTO-BOND ELASTO-BOND801 (BASE) 820TOP COATING (Name of Product) SAME FUTURA-FLEX 550FUTURA-THANE 550 ELASTOBOND(TOP) OR SAME 8205. NUMBER OF COATING APPLICATIONS REQUIREDBase Coatings 1 – 2 1 – 3 1Top Coatings 1 1Granules Required (yes, no or optional) OPTIONAL NO NO OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)Base Coating 30 – 40 20 – 35 10 – 12 1/2Tom Coating 10 – 15 10 – 12 1/27. FILM CURE TIMEBase Coating 6-12 HRS @ 75F 8-10 HRS @ 75F 3 – 4 HRS @ 75FTop Coating 6 – 8 HRS @ 75F 3 – 4 HRS @ 75F8. MINIMUM SLOPE REQUIRED (inches per foot) 1/8" 1/8" 1/8" 1/2"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)Concrete Decks X P X P X P X PPlywood Decks X P T X P T X P T X P TMetal Decks X P X P X P X PExisting Spudded Built-up <strong>Roofing</strong> X P X P X P X POther Coatings P P P P10. FLASHING MATERIAL (type or self-flashing) SELF SELF SELF SELF11. APPLICATION CONDITIONSRecommended Ambient Air Temperature Range (degrees F) 40 – 110 40 – 110 40 – 110 40 – 110Maximum Permitted Wind Velocity Without Screen (mph) 10 10 10 10Maximum Permitted Wind Velocity With Wind Screen (mph) 15 15 15 1512. APPLICATION EQUIPMENT REQUIREMENTSSingle-Component Airless Spray X X X XMulti-Component Airless Spray XOther (roller, brush, etc.) ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH13. RESTRICTED REGIONS (yes/none) NONE NONE NONE NONE14. RESTRICTED BUILDING USES (yes/none) YES NO YES YES15. RECOMMENDED RECOATING SCHEDULE (years or none) 5 – 10 5 – 10 5 – 10 5 – 1016. PHYSICAL PROPERTIES OF THE COATINGTensile Strength Per ASTM D 412 or Other (psi) 500±100 375±25 2700±50 450-550Elongation Per ASTM D 412 or Other (%) 200±30 180±25 275±25 140±10Impact Resistance Per ASTM D 2794 or Other (inch lbs)Accelerated Weathering Per ASTM D 882 or Other (color change) NO CHANGE NO CHANGE NO CHANGE NO CHANGEHeat Aging Per ASTM D 573 or Other (%) NO CHANGE NO CHANGE NO CHANGE NO CHANGEWater Absorption Per ASMT D 570 or Other (%) 1 MAX 0.5 1.5 0.5±0.117. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES YES18. FOAM INSULATION REQUIREMENTSMinimum Thickness (inches) 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 – 3 2.5 – 3 2.5 – 3 2.5 – 3Compressive Strength Per ASTM D 1621 or Other (psi) 40 MIN. 40 MIN. 40 MIN. 40 MIN.Closed Cell Content Per ASTM D 2856 or Other (%) 90 MIN. 90 MIN. 90 MIN. 90 MIN.19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) NO NO NO NO20. YEAR OF FIRST COMMERCIAL USE 1988 1980 1979 198721. NUMBER OF SQUARES INSTALLED (100 ft 2 ) 600,000+ 1 MILLION+ 5 MILLION+ 1.2 MILLION+22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) YES YES YES YES23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT24. NUMBER OF REGIONAL SERVICE LOCATIONS 5 5 5 525. FOR SALES INFORMATION, CONTACT: B. SCHENKE B. SCHENKE B. SCHENKE B. SCHENKE314/521–4100 314/521–4100 314/521–4100 314/521–4100FOR TECHNICAL INFORMATION, CONTACT: B. SCHENKE B. SCHENKE B. SCHENKE B. SCHENKE26. SEE APPENDIX IF CHECKEDNA=not applicable314/521–4100 314/521–4100 314/521–4100 314/521–4100271

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationQUANTUM QUANTUM QUANTUM QUANTUM QUANTUM QUANTUM QUANTUM SWD SWDCOATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. COATINGS, INC. URETHANE URETHANECOMPANY COMPANYACRO-BOND ACRO-BOND ACRO-BOND FUTURA-THANE FUTURA-FLEX 5615 5615 SWD 1929 SWD 1929 F440 442 448 17060 510 BASE TOPX X X X XX X X XNO NO NO YES YES YES YES NO NOLIGHT BLUE WHITE WHITE, GRAY ALUMINUM BLACK GRAY ALUMINUM WHITE, GRAY WHITE,GRAY,OTHERS BUFF BUFFSAME ACRO-BOND SAME FUTURA-FLEX SAME SAME 5615 SWD 1929 SWD 1929 F440 510 BASEACRO-BOND SAME SAME SAME FUTURA-THANE 5615 SAME SAME442 17060 TOP1 1 1 – 2 1 – 2 1 11 1 1 1 1 1 1NO OPTIONAL OPTIONAL OPTIONAL NO OPTIONAL OPTIONAL OPTIONAL OPTIONAL15 – 18 15 – 18 20 – 60 20 – 40 15 3615 – 18 15 – 18 10 – 20 10 – 15 8 121 1/2 – 3 HOURS 1 1/2 – 3 HOURS 4 – 6 HOURS 6 – 8 HRS @ 75F 24 HOURS 24 HOURS1 1/2 – 3 HOURS 1 1/2 – 3 HOURS 6 – 8 HOURS 6 – 8 HRS @ 75F 24 HOURS 24 HOURS1/2" 1/2" 1/2" 1/8" 1/8" 1/8" 1/8" 1/4" 1/4"X P X P X P X P X P X P X P P PX P T X P T X P X P X P X P X P P PX P X P X P X P X P X P X P P PX P X P X P X P X P X P X P P PP P P X P X P X X P PSELF SELF SELF SELF SELF SELF SELF SELF SELF50+ 50+ 50+ 32 – 120 45 – 110 32 – 120 32 – 120 < 50 < 5010 10 10 10 10 10 10 15 1515 15 15 15 15 15 15 25 25X X X X X X XROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH ROLLER, BRUSH X XNONE NONE NONE NONE NONE NONE NONE NONE NONEYES YES YES YES YES YES YES NONE NONE5 – 10 5 – 10 5 – 10 8 – 10 5 – 10 8 – 10 8 – 10 5 5300 300 300 700 300 250 280270 270 120 120 300 400 400 489 35562 62NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGENO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE1.5% MAX. .75 MAX. 5 5YES YES YES YES YES YES YES YES YES1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 – 1 1/2 1 12.5 – 3 2.5 – 3 2.5 – 3 2.5 – 3 2.5 – 3 2.5 2.5 2.5 2.540 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 40 40 40 4090 MIN. 90 MIN. 90 MIN. 90 MIN. 90 MIN. 90 90

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationSWD 1. COMPANY NAME UCSC UCSC UCSCURETHANECOMPANY1929 H 2. PRODUCT NAME DURASIL DURASHIELD DURATHANE3A. COATING DESCRIPTIONX Acrylilc XButylHypalonNeopreneSiliconeXUrethaneXVinylModified AsphaltOther (type)NO 3B. VAPOR RETARDER (yes, perm rating 1.0) NO YES NOWHITE, GRAY, 3C. COLORS AVAILABLE GRAY, WHITE WHITE, TAN, DARK GRAYBUFFCUSTOM1929 H 4. BASE COATING (Name of Product) DURASIL DURASHIELD DURATHANESAME TOP COATING (Name of Product) DURASIL TOP DURASHIELD DURATHANE,DURASHIELD5. NUMBER OF COATING APPLICATIONS REQUIRED1 Base Coatings 1 – 2 2 21 Top Coatings 1 – 2 1 – 2 1OPTIONAL Granules Required (yes, no or optional) OPTIONAL OPTIONAL OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)36 Base Coating 10 – 15 25 2412 Tom Coating 10 – 15 10 167. FILM CURE TIME24 HOURS Base Coating 4 HOURS 4 – 8 HOURS 12 – 16 HOURS24 HOURS Top Coating 24 HOURS 12 HOURS 72 HOURS1/4" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/8" 1/8" 1/8"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P Concrete Decks P P PP Plywood Decks P P PP Metal Decks X X XP Existing Spudded Built-up <strong>Roofing</strong> X X XP Other Coatings P P PSELF 10. FLASHING MATERIAL (type or self-flashing) SELF SELF SELF11. APPLICATION CONDITIONS160Accelerated Weathering Per ASTM D 882 or Other (color change) NONE 10,000 HOURSHeat Aging Per ASTM D 573 or Other (%)Water Absorption Per ASMT D 570 or Other (%) >0.1 2.4YES 17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES18. FOAM INSULATION REQUIREMENTS1 Minimum Thickness (inches) 1 – 2 1 – 2 1 – 22.5 Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 2.5 2.540 Compressive Strength Per ASTM D 1621 or Other (psi) 40 40 4090 > 90 > 90YES 19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) YES YES YES1972 20. YEAR OF FIRST COMMERCIAL USE 1981 1981 1981MILLIONS 21. NUMBER OF SQUARES INSTALLED (100 ft 2 )YES 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) YES YES YESDISTRS, DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT1 24. NUMBER OF REGIONAL SERVICE LOCATIONS 9 9 9R. WHIPPLE 25. FOR SALES INFORMATION, CONTACT: L. WRIGHT L. WRIGHT L. WRIGHT800/828–1394 800/289–8272 800/289–8272 800/289–8272R. WHIPPLE FOR TECHNICAL INFORMATION, CONTACT: L. WRIGHT L. WRIGHT L. WRIGHT800/828–1394 800/289–8272 800/289–8272 800/289–827226. SEE APPENDIX IF CHECKEDNA=not applicableBASE273

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationUNITED UNITED UNITED UNITED UNITED UNITED UNITED UNITED UNITEDCOATINGS COATINGS COATINGS COATINGS COATINGS COATINGS COATINGS COATINGS COATINGSDIATHON DIATHON DIATHON DIATHON DIATHON ACRON UNISIL UNISIL ELASTRONQUICK SET HIGH TENSILE SOLAR CURE 4500 60 600 858X X X X X XXXXNO NO NO NO NO NO NO NO YESPEARL WHITE, MED PEARL WHITE, MED PEARL WHITE, MED WHITE PEARL WHITE, MED LIGHT GRAY, LIGHT GRAY, GRAY, TANGRAY, CUSTOM GRAY, CUSTOM GRAY, CUSTOM GRAY, CUSTOM GRAY, WHITE WHITE, CUSTOMDIATHON DIATHON QS DIATHON HT DIATHON SC DIATHON 4500 ACRON 60 UNISIL 600 UN ISIL SAMEDIATHON DIATHON QS DIATHON HT DIATHON SC DIATHON 4500 ACRON 60 UNISIL 600 UNISIL DIATHON,ELASTUFF 1021 1 1 1 1 1 1 1 11 1 1 1 1 1 1 1 1OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL11 MIN. 11 MIN. 11 MIN. 11 MIN. 11 MIN. 11 MIN. 6 – 11 MIN. 6 – 11 MIN. 15 – 1811 11 MIN. 11 MIN. 11 MIN. 11 MIN. 11 MIN. 11 MIN. 11 MIN. 7 – 93 HRS (MED GRAY) 3 HRS (MED GRAY) 3 HRS (MED GRAY) 3 HRS (MED GRAY) 3 HRS (MED GRAY) 2 – 3 HOURS 2 – 3 HOURS 4 – 6 HOURS4 1/2 HRS (WHITE) 4 1/2 HRS (WHITE) 4 1/2 HRS (WHITE) 4 1/2 HRS (WHITE) 4 1/2 HRS (WHITE) 4 1/2 HRS (WHITE) 2 – 3 HOURS 2 – 3 HOURS1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2 " 1/2 " 1/2"P P P P P PX X X P P XX X X X X X P P XX X X XX X X P P XSELF SELF SELF SELF SELF SELF SELF SELF SELF50 – 110 50 – 110 50 – 110 40 – 110 40 – 110 50 – 11012 12 12 12 12 12 12 12 1220 20 20 20 20 20 20 20 20X X X X X X X X XX X X X X X X X XNONE NONE NONE NONE NONE NONEYES YES YES YES YES YES YES YES YES5 5 5 5 5250 – 440 250 – 440 425 250 240 200 650 650 300280 – 320 280 – 320 475 300 145 180 150 150 75NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE NO CHANGE8% 0.1 MAXYES YES YES YES YES YES YES YES YES1 1 1 1 1 12.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.0 2.5 – 3.040 MIN. 40 MIN. 40 MIN. 40 MIN. 40 MIN. 4090 MIN. 90 MIN. 90 MIN. 90 MIN. 90 MIN. 90NO NO NO NO NO NO NO YES NO1971 1995 1993 1995 1986 1989 1994 1987 19655 MILLION 20 MILLION 50 MILLION 3 MILLION 20,000 500,000NO NO NO NO NO NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT8 8 8 8 4 4B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383 800/541-4383274

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationUNITED UNITED 1. COMPANY NAME UNITED UNITEDCOATINGS COATINGS COATINGS COATINGSELASTUFF ELASTUFF 2. PRODUCT NAME BERM UNISEAL101 102 600 EPOXYSEALER3A. COATING DESCRIPTIONAcrylilcXButylHypalonNeopreneSiliconeX X UrethaneVinylModified AsphaltOther (type)EPOXYNO NO 3B. VAPOR RETARDER (yes, perm rating 1.0) NO NOMEDIUM GRAY IVORY WHITE, 3C. COLORS AVAILABLE LIGHT GRAY, CLEAR, BLACKLIMITED CUSTOMTAN, CUSTOMSAME ELASTUFF 101 4. BASE COATING (Name of Product) BERM 500DIATHIONELASTUFF 102 SAME TOP COATING (Name of Product) BERM 6005. NUMBER OF COATING APPLICATIONS REQUIRED1 Base Coatings 11 Top Coatings 1NO OPTIONAL Granules Required (yes, no or optional) OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)17 Base Coating 11 MIN. 1/2 – 2 MIN.7 Tom Coating 11 MIN.7. FILM CURE TIME6 – 8 HOURS Base Coating 1 1/2 – 2 HOURS 8 HOURS8 – 12 HOURS Top Coating 1 1/2 – 2 HOURS1/2" 1/2" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/2"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P P Concrete Decks XP P Plywood Decks XP P Metal Decks PExisting Spudded Built-up <strong>Roofing</strong>XX X Other Coatings XSELF SELF 10. FLASHING MATERIAL (type or self-flashing) SELF SELF11. APPLICATION CONDITIONS40 – 110 40 – 110 Recommended Ambient Air Temperature Range (degrees F) 50 – 110 50 – 11012 12 Maximum Permitted Wind Velocity Without Screen (mph) 12 1220 20 Maximum Permitted Wind Velocity With Wind Screen (mph) 20 2012. APPLICATION EQUIPMENT REQUIREMENTSX X Single-Component Airless Spray X XMulti-Component Airless SprayX X Other (roller, brush, etc.) X XNONE NONE 13. RESTRICTED REGIONS (yes/none) NONE NONEYES YES 14. RESTRICTED BUILDING USES (yes/none) YES YES5 5 15. RECOMMENDED RECOATING SCHEDULE (years or none) 516. PHYSICAL PROPERTIES OF THE COATING1000 2500 Tensile Strength Per ASTM D 412 or Other (psi) 250500 400 Elongation Per ASTM D 412 or Other (%) 240Impact Resistance Per ASTM D 2794 or Other (inch lbs)NO CHANGE Accelerated Weathering Per ASTM D 882 or Other (color change) NO CHANGEHeat Aging Per ASTM D 573 or Other (%)1.0 MAX 2.5 MAX Water Absorption Per ASMT D 570 or Other (%)YES YES 17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES18. FOAM INSULATION REQUIREMENTS1 1 Minimum Thickness (inches) 12.5 – 3.0 2.5 – 3.0 Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 – 3.040 40 Compressive Strength Per ASTM D 1621 or Other (psi) 40 MIN.90 90 Closed Cell Content Per ASTM D 2856 or Other (%) 90 MIN.NO NO 19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) NO1989 1989 20. YEAR OF FIRST COMMERCIAL USE 1990 19953,000 5,000 21. NUMBER OF SQUARES INSTALLED (100 ft 2 )NO NO 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) NO NODISTRS, DIRECT DISTRS, DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS, DIRECT4 4 24. NUMBER OF REGIONAL SERVICE LOCATIONS 8 8B. MANN B. MANN 25. FOR SALES INFORMATION, CONTACT: B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-4383B. MANN B. MANN FOR TECHNICAL INFORMATION, CONTACT: B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-438326. SEE APPENDIX IF CHECKEDNA=not applicable275

Spray Polyurethane Foam-Based Systems; Protective Coatings -<strong>General</strong> InformationUNITED UNITED UNITED UNITEDCOATINGS COATINGS COATINGS COATINGSUNI-TILE ACRILEX 300 UNIBASE ADHERE-ITEPOXY ACRYLIC ACRYLIC EPDMSEALER PRIMER ADHES/PRIMER PRIMERXXXEPOXYNO NO NO NOCLEAR, BLACK LIGHT GRAY TRANSPARENT CLEARGREEN1/2 – 2 MIN. 1/2 – 2 MIN.3 HOURS 1 – 24 1 – 2 1/2 – 1X50 – 110 50 – 110 50 – 110 50 – 11012 12 12 1220 20 20 20X X X XX X X XNONE NONE NONE NONEYES YES YES YES10006501970 1993 1996 1995NO NO NO NODISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT DISTRS, DIRECT8 8 8 8B. MANN B. MANN B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-4383B. MANN B. MANN B. MANN B. MANN800/541-4383 800/541-4383 800/541-4383 800/541-4383276

Spray Polyurethane Foam-Based Systems; Insulation - <strong>General</strong> Information1. COMPANY NAME ERSYSTEMS ERSYSTEMS GACO GACO GACO GACOWESTERN WESTERN WESTERN WESTERNINC. INC. INC. INC.2. PRODUCT NAME ER FOAM 2.5 ER FOAM 3.0 POLYFOAM POLYFOAM POLYFOAM FOLYFOAM303 303 303 275WINTER SPEED REG. SPEED SUMMER SPEED WINTER SPEED3. RECOMMENDED TYPES OF PROTECTIVE COVERINGSAcrylic X X X X X XButyl X X X X X XHypalon X X X X X XNeoprene X X X X X XSilicones X X X X X XUrethanes X X X X X XVinyls X X X X X XModified Asphalts X X X X X XAggregate X X X X X X4. SYSTEM COATING AVAILABLE FROM MANUFACTURER (yes/no) YES YES YES YES YES YES5. REQUIRED APPLICATION CONDITIONSAmbient Air Temperature Ranges (degrees F) 40-50 40 – 50 40 – 55 55 – 80 80 – 120 50 – 70Maximum Ambient Relative Humidity (%) 80-85 80 – 85 85 85 85 85Maximum Allowable Wind Velocity Withoug Wind Screen (mph) 15 15 10 15 15 10Maximum Allowable Wind Velocity With Wind Screen (mph) 25-30 25 – 30 20 25 25 206. PHYSICAL PROPERTIES OF THE FOAMNominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5-2.65 3 – 3.2 3.0 3.0 3.0 2.75Compressive Strength Per ASTM D 1621 or Other (psi) 35-45 50 52 52 52 42Closed-Cell Content Per ASTM D 2856 or Other (% min) 90 90 95 95 95 94Thermal Resistance R-Value at: 1 inch 6.25 6.25 7 7 7 7Thermal Resistance R-Value at: 2 inches 12.5 12.5 14 14 14 14Thermal Resistance R-Value at: 3 inches 18.75 18.75 21 21 21 217. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES YES YES YES8. YEAR OF FIRST COMMERCIAL USE 1996 1996 1986 1986 1986 19959. NUMBER OF SQUARES INSTALLED (100 ft 2 ) THOUSANDS THOUSANDS 11,500 16,000 5,700 14,40010. MANUFACTURER-QUALIFIED APPLICATORS REQUIRED (yes/no) NO NO YES YES YES YES11. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS, DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT12. NUMBER OF REGIONAL SERVICE LOCATIONS 14 14 3 3 3 313. FOR SALES INFORMATION, CONTACT: T. LEONARD T. LEONARD J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER800/403-7747 800/403-7747 800/869-0958 800/869-0958 800/869-0958 800/869-0958FOR TECHNICAL INFORMATION, CONTACT: T. LEONARD T. LEONARD A. JENKINS A. JENKINS A. JENKINS A. JENKINS800/403-7747 800/403-7747 800/456-4226 800/456-4226 800/456-4226 800/456-422614. SEE APPENDIX IF CHECKED1. COMPANY NAME GACO GACO GACO GACO GACO NATIONALWESTERN WESTERN WESTERN WESTERN WESTERN COATINGSINC. INC. INC. INC. INC.2. PRODUCT NAME POLYFOAM 251 POLYFOAM POLYFOAM POLYFOAM POLYFOAM SPRAY FOAM251 251 251 275 275WINTER SPEED REG. SPEED SUMMER SPEED REG. SPEED SUMMER SPEED3. RECOMMENDED TYPES OF PROTECTIVE COVERINGSAcrylic X X X X X XButyl X X X X XHypalon X X X X XNeoprene X X X X XSilicones X X X X XUrethanes X X X X XVinyls X X X X XModified Asphalts X X X X XAggregate X X X X X4. SYSTEM COATING AVAILABLE FROM MANUFACTURER (yes/no) YES YES YES YES YES YES5. REQUIRED APPLICATION CONDITIONSAmbient Air Temperature Ranges (degrees F) 40 – 55 55 – 80 80 – 120 70 – 90 90 – 120 50 – 110Maximum Ambient Relative Humidity (%) 85 85 85 85 85 95Maximum Allowable Wind Velocity Withoug Wind Screen (mph) 10 15 15 15 15 15Maximum Allowable Wind Velocity With Wind Screen (mph) 20 25 25 25 25 256. PHYSICAL PROPERTIES OF THE FOAMNominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 2.5 2.5 2.75 2.75 2.5 – 3.0Compressive Strength Per ASTM D 1621 or Other (psi) 44 44 44 42 42 42+Closed-Cell Content Per ASTM D 2856 or Other (% min) 95 95 95 94 94 91Thermal Resistance R-Value at: 1 inch 7 7 7 7 7 7Thermal Resistance R-Value at: 2 inches 14 14 14 14 14 14Thermal Resistance R-Value at: 3 inches 21 21 21 21 21 217. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES YES YES YES8. YEAR OF FIRST COMMERCIAL USE 1986 1986 1986 1995 1995 19819. NUMBER OF SQUARES INSTALLED (100 ft 2 ) 3,750 13,500 7,000 67,800 45,000 50,00010. MANUFACTURER-QUALIFIED APPLICATORS REQUIRED (yes/no) YES YES YES YES YES YES11. METHODS OF DISTRIBUTION (distributors and/or direct) DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT DIRECT12. NUMBER OF REGIONAL SERVICE LOCATIONS 3 3 3 3 3 513. FOR SALES INFORMATION, CONTACT: J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER J. FREEMESSER D. VARVAIS800/869-0958 800/869-0958 800/869-0958 800/869-0958 800/869-0958 805/388–7112FOR TECHNICAL INFORMATION, CONTACT: A. JENKINS A. JENKINS A. JENKINS A. JENKINS A. JENKINS TECH. DEPT800/456-4226 800/456-4226 800/456-4226 800/456-4226 800/456-4226 805/388–711214. SEE APPENDIX IF CHECKEDNA=not applicable276

Spray Polyurethane Foam-Based Systems; Insulation - <strong>General</strong> InformationNO. CAROLINA NO. CAROLINA NO. CAROLINA NO. CAROLINA POLYTHANE POLYTHANE POLYTHANE PREMIUM SWD SWDFOAM FOAM FOAM FOAM SYSTEMS, SYSTEMS, SYSTEMS, POLYMERS URETHANE URETHANEINDUSTRIES INDUSTRIES INDUSTRIES ENTERPRISES INC. INC. INC. COMPANY COMPANYNCFI SYSTEM NCFI SYSTEM NCFI SYSTEM NCFI SYSTEM PSI-SH200-25 PSI-SH200-27 PSI-SH200-30 PREMIUM SWD 525-2.0 SWD 525-2.5591-25 591-28 692-2.5 692-2.8 241-30X X X X X X X XX X X X X XX X X X X XX X X X X XX X X X X XX X X X X X X XX XX X XX X X X X X X X X XNO NO NO NO YES YES YES YES YES YES50 MIN. 50 MIN. 50 MIN 50 MIN 50 – 110 50 – 110 50 – 110 40 – 95 55 5578 78 78 78 80 8015 15 15 15 10 10 10 15 15 1525 25 25 25 20 20 20 20 25 252.7 3.0 2.7 3.0 2.5 2.7 3.0 3.0 1.8 – 2.1 2.3 – 2.635 45 35 45 40 45 50 47 25 – 30 35 – 4090 90 90 90 90 90 90 95 90 – 95 90 – 956.7 6.7 6.7 6.7 6.7 6.7 6.7 6.5 6.7 6.713.0 13.0 13.0 13.0 13.4 13.4 13.4 13 13.4 13.420.0 20.0 20.0 20.0 20.1 20.1 20.1 19.5 20.1 20.1YES YES YES YES YES YES YES YES NO YES1991 1991 1992 1992 1981 1981 1981 1991 1972 1972500,000 275,000 3,500 1,000 300,000 300,000 300,000 HUNDREDS THOUSANDSNO NO YES YES YES YES YES YES NO NODIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DIRECT DISTRS,DIRECT DISTRS,DIRECT DISTRS,DIRECT1 1 1 1 15 15 15 9 1 1S. RIDDLE S. RIDDLE S. RIDDLE S. RIDDLE R. STOCKDALE R. STOCKDALE R. STOCKDALE SALES R. WHIPPLE R. WHIPPLE336/789–9161 336/789–9161 336/789–9161 336/789–9161 713/350–9000 713/350–9000 713/350–9000 800/756–3626 800/828–1394 800/828–1394C. TOLBERT C. TOLBERT C. TOLBERT C. TOLBERT R. STOCKDALE R. STOCKDALE R. STOCKDALE TECH. SERVICE R. WHIPPLE R. WHIPPLE336/789–9161 336/789–9161 336/789–9161 336/789–9161 713/350–9000 713/350–9000 713/350–9000 800/756–3626 800/828–1394 800/828–1394X X X XSWD UCSC UCSC UCSC UCSC UCSCURETHANECOMPANYSWD 525-3.0 UCSC 1.5 UCSC 1.7 UCSC 2.0 UCSC 2.5 UCSC 3.0X X X X X XX X X XX X X XX X X X XX X X X X XX X X X X XYES YES YES YES YES YES55 40 – 110 40 – 110 40 – 110 40 – 110 40 – 11080 85 85 85 85 8515 15 15 15 15 1525 25 25 25 25 252.8 – 3.2 1.5 1.5 2.0 2.5 3.050 – 55 19 22 29 40 5090 – 95

Metal Roof Panels1. COMPANY NAME AEP-SPAN AEP-SPAN2. PRODUCT NAME SPAN-LOK (SL) SNAP-SEAM (SN)3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.) 22, 24 / KYNAR, BARE 22, 24 / KYNAR, BAREAluminized Steel (ga.)Aluminum (ga.) 0.032, 0.040 / KYNAR 0.032 / KYNARCopper (ga.) 16, 20Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 45 454D. PANEL WIDTHS (in.) 16, 18 10, 12, 18, 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/4:12 2:12Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA) NA 30-LB. FELT6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 2.3 / FRoll Formed (180 degrees) 2.3 / FDouble Roll Formed (two 180 degrees) 2.3 / FRoll and LockSnap-on CapSnap Together 1-3/4 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, Concealed X XCLIP, CONCEALEDFixed ClipSlip ClipMoveable Clip (designed allowable movement, inches) 19. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1993 1985Number of Squares Installed 50,000+ 50,000+Licensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 40 40For Sales Information, Contact: S. CORDOVA S. CORDOVAFor Technical Information, Contact: J. DAHDAH J. DAHDAH11. ASTM E331 WATER PENETRATION TEST RESULTS 0/6.24 PSF 0 @ 6.24 PSF(results or none)XX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.013/6.24 PSF 0.0238 @ 6.24 PSF(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable278

Metal Roof PanelsAEP-SPAN AEP-SPAN AEP-SPAN AEP-SPANSTRUCTURAL BATTEN SEAM SN (SBS) HIGH-SEAM (HS) CAP-SEAM (CS) BATTEN SEAM (BS)YES YES YES YESYES YES YESSTRUCTURAL BATTEN STANDING SEAM STANDING SEAM BATTEN SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24 / KYNAR, BARE 22, 24 / KYNAR, BARE 22, 24 / KYNAR, BARE 22, 24 / KYNAR, BARE0..032 / KYNAR 0.032, 0.040 / KYNAR 0.032 / KYNAR 0.032, 0.040 / KYNAR16, 20 16, 20 16, 20 16, 2045 45 45 4510, 12, 18, 24 12, 20 12, 20 16, 242:12 3:12 3:12 3:12OPTIONAL REQUIRED REQUIRED REQUIRED30-LB. FELT 30-LB. FELT 30-LB. FELT 30-LB. FELTXXXXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2 / F 1-1/2 / N1 / F 2 / NX X X XX X X XXX X XX1985 1980 1989 197850,000+ 50,000+ 25,000+ 20,000+YES YES YES YESDIRECT DIRECT DIRECT DIRECT40 40 40 40S. CORDOVA S. CORDOVA S. CORDOVA S. CORDOVAJ. DAHDAH J. DAHDAH J. DAHDAH J. DAHDAH0 @ 6.24 PSF NONE 0 @ 6.34 PSF NONE0.059 @ 6.24 PSF NONE 0 .059 @ 6.24 PSF NONEUL-90 UL-90 UL-90 NONE279

Metal Roof Panels1. COMPANY NAME AEP-SPAN AEP-SPAN2. PRODUCT NAME BERMUDA SQUARE BATTEN (SB)3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no)PANEL CONFIGURATION4A. Panel Description BERMUDA STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.) 22, 24 / KYNAR, BARE 24 / KYNAR, BAREAluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 30 454D. PANEL WIDTHS (in.) 9.5 125. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 4:12 3:12Solid Decking (required, optional, or not used) REQUIRED REQUIREDUnderlayment (type or NA) 40-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical LegTrapezoidalBattenOther (specify)HORIZONTAL7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and Lock 1 / N 1 / NSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, Concealed X XCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1975 1975Number of Squares Installed 5,000+ 10,000+Licensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 40 40For Sales Information, Contact: S. CORDOVA S. CORDOVAFor Technical Information, Contact: J. DAHDAH J. DAHDAH11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE NONE16. SEE APPENDIX IF CHECKEDNA=not applicable280

Metal Roof PanelsAEP-SPAN AMERICAN BUILDING ROOFING & AMERICAN BUILDING ROOFING & AMERICAN BUILDING ROOFING &ARCHITECTURAL PRODUCTS ARCHITECTURAL PRODUCTS ARCHITECTURAL PRODUCTSSTANDING SEAM (SS) STANDING SEAM II PANELS STANDING SEAM 360 LONG SPAN PANELSYES YES YESYES YES YESSTANDING SEAM FIELD-LOCKED STANDING SEAM FIELD FORMED STANDING SEAM LAPPED SEAMSTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR, BARE 24, 22 / UNFINISHED, KYNAR 500 24, 22 / UNFINISHED, KYNAR 500 24, 26 / UNFINISHED, KYNAR 50045 60 60 4512 24 24 363:12 1/4: 12 1/4:12 1/2: 12REQUIRED OPTIONAL OPTIONAL OPTIONAL30-LB. FELTX X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/4 / E1 / N3 / F3 / FXXX X X2/1/02 2/1/021975 1977 1996 197310,000+YES YES YES YESDIRECT40S. CORDOVA K. FISCHER K. FISCHER K. FISCHERJ. DAHDAH J. SAVAGE J. SAVAGE J. SAVAGENONE NONE NONE NONENONE NONE NONE NONENONE UL-90 UL-90, UL-90,FM I-60, I-90, I-120 FM I-150X X X281

Metal Roof Panels1. COMPANY NAME AMERICAN BUILDING ROOFING & AMERICAN BUILDING ROOFING &ARCHITECTURAL PRODUCTS ARCHITECTURAL PRODUCTS2. PRODUCT NAME MANSARD FASCIA LOC-SEAM PANEL3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO YESPANEL CONFIGURATION4A. Panel Description FIELD LOCKED STANDING SEAM FIELD-FORMED STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.) 24 / UNFINISHED, KYNAR 500 22, 24 / UNFINISHED, KYNAR 500Aluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 30 644D. PANEL WIDTHS (in.) 10, 18 12, 165. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 1/4:12Solid Decking (required, optional, or not used) REQUIRED OPTIONALUnderlayment (type or NA) 30-LB. FELT6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 2, 3 / FRoll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together 1 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipXMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1989 1989Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct)Number of Regional Service LocationsFor Sales Information, Contact: K. FISCHER K. FISCHERFor Technical Information, Contact: J. SAVAGE J. SAVAGE11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NO LEAKAGE @ 20 PSF(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE 0.009 SCFM/SF @ 20 PSF(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable282

Metal Roof PanelsAMERICAN BUILDING ROOFING & AMERICAN BUILDING ROOFING & AMERICAN BUILDING ROOFING & AMERICAN STEELARCHITECTURAL PRODUCTS ARCHITECTURAL PRODUCTS ARCHITECTURAL PRODUCTS BUILDING CO., INC.MULTI-RIB PANEL LOC-SEAM 360 SEAM-LOC EXPANDEK STANDING SEAMYES YES YES YESYES YES YES YESLAPPED SEAM FIELD FORMED STANDING SEAM FIELD LOCKED STANDING SEAM HINGE LOCKED STAIND SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES23, 24, 26 / DEXSTAR 850, UNFINISHED26, 24 / UNFINISHED, KYNAR 500 22, 24 / UNFINISHED, KYNAR 500 24 / UNFINISHED, KYNAR 500 22, 24, 26 / DEXSTAR 850, UNFINISHED45 64 40 6036 12, 16 12, 16, 18 18, 20, 241/2: 12 1/4:12 3:12 1/4:12OPTIONAL OPTIONAL NOT USEDN/AXX X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE3/4 / E2 / F1.75 / F 3 / EXXXXX1.25 1WALLS AND FACADES1985 1999 1999 1984YES YES YES NOK. FISCHER K. FISCHER K. FISCHER G. VEILLEUXJ. SAVAGE J. SAVAGE J. SAVAGE S. HALVORSONNONE NONE NONE NONENONENONE NONE NONE NONENONEUL-90 UL-90, UL-90 UL-90XFM 1-60 to FM I-180283

Metal Roof Panels1. COMPANY NAME ARS INDUSTRIES ARS INDUSTRIES2. PRODUCT NAME SSB SSC3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES NOPANEL CONFIGURATION4A. Panel Description LOCK FORM BATTEN SEAM SNAP-ON BATTEN4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 22, 24, 26 / KYNAR 500, SILICONE 22, 24 / KYNAR 500, SILICONEPOLYESTER, UNFINISHEDStainless Steel (ga.) 22, 24 26POLYESTER, UNFINISHEDGalvalume (ga.) 22, 24, 26 / KYNAR 500, SILICONE 24, 26 / KYNAR 500, SILICONEPOLYESTER, UNFINISHEDPOLYESTER, MILLAluminized Steel (ga.) 22, 24 24, 26Aluminum (ga.) 0.032, 0.040 / KYNAR 500, SILICONE 0.032 / KYNAR 500, SILICONEPOLYESTER, ANODIZEDPOLYESTER, ANODIZEDCopper (ga.) 16, 20 16,20Terne Metal (ga.) 24 24, 26Zinc (ga.) 24 24, 264C. MAXIMUM LENGTH (lf.) 60 604D. PANEL WIDTHS (in.) 8, 12, 16, 18, 20, 24 12, 16, 18, 20, 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/4:12 3:12Solid Decking (required, optional, or not used) OPTIONAL REQUIREDUnderlayment (type or NA) 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT6. PANEL PROFILEVertical LegXTrapezoidalBatten X XOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 1-1/2 / F, ERoll Formed (180 degrees) 1-1/2 / F, EDouble Roll Formed (two 180 degrees) 1-1/2 / F, ERoll and Lock 2-1/2 / F, ESnap-on Cap 1-1/2 / N 1 / FSnap Together 1-3/4 / F, E8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipXSlip Clip X XMoveable Clip (designed allowable movement, inches) 1-1/29. SPECIALTY APPLICATIONSCurved X XTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1984 1984Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct) YES YESNumber of Regional Service LocationsFor Sales Information, Contact: 205/836-6777 205/836-6777For Technical Information, Contact: 205/836-6777 205/836-677711. ASTM E331 WATER PENETRATION TEST RESULTS NO PENETRATION @ 20 PSF NONE(results or none)FOR 15 MINUTESXX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS LEAKAGE AT SEAM NOT TO EXCEED 0.005 NONE(results or none)0.005 CFM PSF OF PANEL @ 10 PSFDIFFERENTIAL PRESSURE14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 NONE16. SEE APPENDIX IF CHECKEDNA=not applicable284

Metal Roof PanelsARS INDUSTRIES ARS INDUSTRIES ARS INDUSTRIES ATAS INTERNATIONAL, INC.SS LB SS 1.5 SS 2.5 MONARCH ROOF PANELYES YES YES YESNO YES YES YESBATTEN SEAM LOCK FORM STANDING SEAM SNAP-ON BATTEN INTEGRAL STANDING AND BATTEN SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24 / KYNAR 500, SILICONE 22, 24 / KYNAR 500, SILICONE 22, 24 / KYNAR 500, SILICONE 22, 24 / KYNAR 500, UNFINISHEDPOLYESTER, UNFINISHED POLYESTER, UNFINISHED POLYESTER, UNFINISHED24, 26 22, 24 24 2624, 26 / KYNAR 500, SILICON 22, 24, 26 / KYNAR, SILICON 24, 26 / KYNAR 500, SILICON 22, 24 / KYNAR 500, UNFINISHEDPOLYESTER, MILL POLYESTER, MILL POLYESTER, MILL24, 26 22, 24 24, 2624, 26 / KYNAR 500, SILICON 0.032, 0.040 / KYNAR 500, SILICON 0.032, 0.040 / KYNAR 500, SILICON 0.032, 0.040, 0.050 /POLYESTER, ANODIZED POLYESTER, ANODIZED POLYESTER, ANODIZED KYNAR 50016, 20 16, 20 16, 2024 2424 2460 60 60 708, 12, 16, 18, 20, 24 8, 12, 16, 18, 20, 24 12, 16, 18 12, 163:12 1/4:12 1/4:12 2:12REQUIRED OPTIONAL OPTIONAL OPTIONAL30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FELTXXXXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/2 / F, E1-1/2 / F, E 2-1/2 / F, E1-1/2 / N 2-1/22, 2-1/2 / FXX X X1-1/2 2-1/2X1984 1984 1984 1981>100,000YES YES YES NODISTRIBUTORS2205/836-6777 205/836-6777 205/836-6777 J. BUSH 610/395-8445205/836-6777 205/836-6777 205/836-6777 J. BUSH 610/395-8445NONE NO PENETRATION @ 20 PSF NO PENETRATION @ 20 PSF NO LEAKAGE @ 10 PSFFOR 15 MINUTESFOR15 MINUTESNONE LEAKAGE AT SEAM NOT TO EXCEED LEAKAGE AT SEAM NOT TO EXCEED 0.13 CFM PER SQ FT @ 4.00 PSF0.005 CFM PSF OF PANEL @ 10 PSF 0.005 CFM PSF OF PANEL @ 10 PSFDIFFERENTAIL PRESSUREDIFFERENTAIL PRESSURENONE UL-90 UL-90 UL-90X285

Metal Roof Panels1. COMPANY NAME ATAS INTERNATIONAL, INC. ATAS INTERNATIONAL, INC.2. PRODUCT NAME MULTI-PURPOSE PANEL PC SNAP-ON SYSTEM3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES NOPANEL CONFIGURATION4A. Panel Description STRUCTURAL STANDING AND BATTEN SEAM SNAP-ON SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 24 / KYNAR, UNFINISHED 24 / KYNAR 500, UNFINISHEDStainless Steel (ga.)Galvalume (ga.) 24 / KYNAR 500, UNFINISHED 24 / KYNAR 500, UNFINISHEDAluminized Steel (ga.)Aluminum (ga.) 0.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500,ANODIZEDANODIZEDCopper (ga.) 16, 20 16, 20Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 40 654D. PANEL WIDTHS (in.) 12, 16 12-5/8, 15-1/45. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 3:12Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA) 30-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical LegXTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 1-1/4 / NSnap Together 1-1/4 / N8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip ClipMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1977 1984Number of Squares Installed >100,000 >100,000Licensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct) DISTRIBUTORES DISTRIBUTORSNumber of Regional Service Locations 2 2For Sales Information, Contact: J. BUSH 610/395-8445 J. BUSH 610/395-8445For Technical Information, Contact: J. BUSH 610/395-8445 J. BUSH 610/395-844511. ASTM E331 WATER PENETRATION TEST RESULTS NO LEAKATE @ 9.75 PSF NONE(results or none)XXXXX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.11 CFM PER SQ FT @ 4.00 PSF NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable286

Metal Roof PanelsATAS INTERNATIONAL, INC. ATAS INTERNATIONAL, INC. ATAS INTERNATIONAL, INC. ATAS INTERNATIONAL, INC.PC SNAP-ON SYSTEM METAFOR DUTCH SEAM FIELD LOCK SEAMYES YES YES YESNO YES YES YESSNAP-ON BATTEN CORRUGATED STRUCTURAL STANDING SEAM STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR 500, UNFINISHED 22, 24 / KYNAR 500, UNFINISHED 22, 2424 / KYNAR 500, UNFINISHED 22, 24 / KYNAR 500, UNFINISHED0.032, 0.0400.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500 0.032, 0.040 / KYNAR 500,ANODIZEDANODIZED16, 20 16, 2065 40 65 7012-1/2, 16-1/2 12 11, 15, 1-1/4 14, 183;12 3:12 2:12 1/2:12OPTIONAL OPTIONAL OPTIONAL OPTIONAL30-LB. FELT 30-LB. FELT 30-LB. FELT N/AXXSQUARE CORRUGATIONSHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONEX1-1/2 / N5/8 / N 1-5/8 / FXXXXXXXXX1984 1981 1981 1999>100,000 >100,000 >100,000 >100NO NO NO YESDISTRIBUTORS DISTRIBUTORS DISTRIBUTORS DISTRIBUTORS2 2 2 3J. BUSH 610/395-8445 J. BUSH 610/395-8445 J. BUSH 610/395-8445 J. BUSH 610/395-8445J. BUSH 610/395-8445 J. BUSH 610/395-8445 J. BUSH 610/395-8445 J. BUSH 610/395-8445NONE NONE NO LEAKAGE @12.0 PSF (69 MPH)NONE NONE 0.08 CFM/FE 2@ 1.57 PSF (25 MPH)NONE UL-90 UL-90X X X X287

Metal Roof Panels1. COMPANY NAME BERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO.2. PRODUCT NAME TEE-PANEL HIGH SEAM TEE-PANEL3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO YESPANEL CONFIGURATION4A. Panel Description SNAP-ON STANDING SEAM SNAP-ON CAP STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000Stainless Steel (ga.)Galvalume (ga.) 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000Aluminized Steel (ga.)Aluminum (ga.)Copper (ga.) 16 16Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.)4D. PANEL WIDTHS (in.) 12-3/4 18-1/45. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1:12 1:12Solid Decking (required, optional, or not used) REQUIRED REQIREDUnderlayment (type or NA) 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 1 / F 1, 1-1/2 / FSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurved X XTapered X XOtherFREE-FORM COMPOUND CURVED10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1969 1970Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct)Number of Regional Service LocationsFor Sales Information, Contact: D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009For Technical Information, Contact: R MARKS 800/231-8127 R MARKS 800/231-812711. ASTM E331 WATER PENETRATION TEST RESULTS NO LEAKAGE @ 6.24 PSF NO LEAKAGE @ 6.24 PSF(results or none) DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NO MEASURABLE INFILTRATION NO MEASURABLE INFILTRATION(results or none) @ STATIC PRESSURE @ STATIC PRESSUREDIFFERENTIAL OF 1.57 PSFDIFFERENTIAL OF 1.57 PSF14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable288

Metal Roof PanelsBERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO.BATTEN SEAM PANEL ZEE-LOCK DOUBLE-LOCK, DL-1, DL-1.5 CEE-LOCK PANELYES YES YES YESYES YES YES YESBATTEN STANDING SEAM LOCK-FORMED STANDING SEAM LOCK-FORMED STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 500024 / KYNAR 500, HLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 500016 16 16 1616 16 17, 18 16-1/2401:12 1/2:12 1/2:12 1:12OPTIONAL OPTIONAL OPTIONAL OPTIONAL30-LB. FELT OR EQUIVALENT30-LB. FELT OR EQUIVALENTX X XXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2 / F1, 1-1/2 / N1-3/4 / F1-1/2 / FX X X X1970 1989 1987 1989NO NO NO NOD DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009R MARKS 800/231-8127 R MARKS 800/231-8127 R MARKS 800/231-8127 R MARKS 800/231-8127NONE NO LEAKAGE @ 20 PSF NONE NO LEAKAGE @ 20 PSFDIFFERENTIAL PRESSUREDIFFERENTIAL PRESSURENONE NO MEASUREABLE INFILTRATION NONE NO MEASUREABLE INFILTRATION@ STATIC PRESSURE@ STATIC PRESSUREDIFFERENTIAL OF 6.24 PSFDIFFERENTIAL OF 6.24 PSFUL-90 FM I-60, FM I-20 NONE UL-90UL-90X X X X289

Metal Roof Panels1. COMPANY NAME BERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO.2. PRODUCT NAME R-PANEL M-PANEL3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description CORRUGATED ROOF PANEL CORRUGATED ROOF PANEL4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000Stainless Steel (ga.)Galvalume (ga.) 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000Aluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 40 404D. PANEL WIDTHS (in.) 36 365. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1:12 1:12Solid Decking (required, optional, or not used) NOT USED NOT USEDUnderlayment (type or NA) NA NA6. PANEL PROFILEVertical LegTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlapped 1-1/4 / E 3/4 / ECrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, Exposed X XThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1989 1988Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct)Number of Regional Service LocationsM 800/669-0009 For Sales Information, Contact: D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009For Technical Information, Contact: R MARKS 800/231-8127 R MARKS 800/231-812711. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)X12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 NONE16. SEE APPENDIX IF CHECKEDNA=not applicable290

Metal Roof PanelsBERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO. BERRIDGE MANUFACTURING CO. BUTLER ROOF DIVISIONBERMUDA ROOF CURVED FLAT SEAM S-TILE MR-24YES YES YES YESNO NO NO YESHORIZONTAL PLANK ROOF SYSTEM CURVED FLAT SEAM S-TILE DOUBLE LOCK STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 22, 24 / KYNAR 500, HYLAR 500024 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 24 / KYNAR 500, HYLAR 5000 22, 24 / UNFINISHED1640 40 40 608 32-11/16 243:12 3:12 3:12 1/4:12OPTIONAL REQUIRED OPTIONAL NOT USED30-LB. FELT OR EQUIVALENT ICE/WATER GUARD 30-LB. FELT/ICE, WATER GUARD NAXHORIZONTAL PLANKS-TILEHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONEE2-3/4 / F1 / FXXX2-1/21991 1980 1993 1969> 1 BILLIONNO YES YES YESDISTRIBUTORS, DIRECTDISTRIBUTORS, DIRECT6D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009D DOYLE 800/231-8127 G GILLUM 800/669-0009800/998-7663R MARKS 800/231-8127 R MARKS 800/231-8127 R MARKS 800/231-8127 800/998-7663NONE NONE NONE NONENONE NONE NONE NONEUL-90 NONE UL-90 FM I-60, FM I-90, FM I-120UL-90XX291

Metal Roof Panels1. COMPANY NAME BUTLER ROOF DIVISION BUTLER ROOF DIVISION2. PRODUCT NAME VSR CMR-243. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description CRIMPED STANDING SEAM DOUBLE LOCK STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 22, 24 / KYNAR 500, HYLAR 5000 22, 24, / KYNAR 500,Stainless Steel (ga.)HYLAR 5000Galvalume (ga.) 22, 24 / UNFINISHED 22, 24, / UNFINISHEDAluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 45 604D. PANEL WIDTHS (in.) 16 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/2:12 1/4:12Solid Decking (required, optional, or not used) OPTIONAL REQUIREDUnderlayment (type or NA)6. PANEL PROFILEVertical LegTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 2 / FRoll Formed (180 degrees) 2-3/4 / FDouble Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipXSlip ClipMoveable Clip (designed allowable movement, inches) 2-1/2 2-1/29. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1968 1974Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct)Number of Regional Service Locations 6 6For Sales Information, Contact: 800/998-7663 800/998-7663For Technical Information, Contact: 800/998-7663 800/998-766311. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)XX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN FM I-60, FM I-105, FM I-60, FM I-90, FM I-120UL-90UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable292

Metal Roof PanelsBUTLER ROOF DIVISION BUTLER ROOF DIVISION BUTLER ROOF DIVISION CURVELINE, INC.BULTERIB II GENESIS 360 GENESIS FASCIA CURVELINENO YES YES YESYES NO NO YESROLL FORMED MULTI-RIB DOUBLE LOCK STANDING SEAM INTERLOCKING CURVED TRAPEZOIDAL PANELSTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24, 26, 28 / KYNAR 500, 24 / KYNAR 500, HYLAR 5000 24 / KYNAR, HYLAR 5000 18, 26 / SILICON POLYESTER, CORRESTAN,HYLAR 5000 DEXSTAR 850, KYNAR 500, UNFINISHED22, 2624, 26, 28 / UNFINISHED 24 / UNFINISHED 24 / UNFINISHED 18, 26 / UNFINISHED18, 26 / UNFINISHED240.032, 0.040, 0.050 / UNFINISHED,ANODIZED40 45 45 3036 12, 16, 24 12, 16, 24 18, 24, 36, 401/2:12 1/2:12 3:12 1:12NOT USED REQUIRED REQUIRED NOT USEDNANAXXXXSNAP LOCKHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/2 / E 1 / N1 / F 3/4, 1-1/2, 3, 4 / E3/4, 1-1/2, 3, 4 / E1-1/2, 3 / EXXXX X XXXXMITERED1969 1987 1997 1985YES YES YES NO6800/998-7663 800/998-7663 800/998-7663 T. HOLMAN. D. KLOCEK800/998-7663 800/998-7663 800/998-7663 D. KLOCEK13.24 PSF/15 MIN = 020 PSF = MAX 0.003 CFM/SQ FTFM I-90 UL-90 UL-90 NONEUL-90XX293

Metal Roof Panels1. COMPANY NAME ENGLERT, INC. ENGLERT, INC.2. PRODUCT NAME SERIES 2500 SERIES 10003. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES NOPANEL CONFIGURATION4A. Panel Description MECHANICAL SEAM SNAP-LOCK4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 22, 24 / KYNAR 550, 22, 24 / KYNAR 550,Stainless Steel (ga.)HYLAR 5000, MILLHYLAR 5000, MILLGalvalume (ga.) 22, 24 / KYNAR 500, 22, 24 / KYNAR 500,HYLAR 5000, MILLHYLAR 5000, MILLAluminized Steel (ga.)Aluminum (ga.) 0.032, 0.040 / KYNAR 500, 0.032 / KYNAR 500,HYLAR 5000 HYLAR 5000Copper (ga.) 16, 20 16Terne Metal (ga.) 26Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 200 2004D. PANEL WIDTHS (in.) 12, 16, 18 12, 16, 205. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/4:12 3:12Solid Decking (required, optional, or not used) OPTIONAL REQUIREDUnderlayment (type or NA) 30-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 2 / FRoll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together 1-1/2 / N8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipMoveable Clip (designed allowable movement, inches)X9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1993 1993Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES NOMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 10 10For Sales Information, Contact: K. CORCORAN K. CORCORANFor Technical Information, Contact: J. TRIPOD J. TRIPOD11. ASTM E331 WATER PENETRATION TEST RESULTS 15.1 PSF/15 MIN = 0 NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 6.24 PSF/MAX .013 CFM/FT SQ NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN FM I-90, UL-9016. SEE APPENDIX IF CHECKEDNA=not applicableUL 90294

Metal Roof PanelsENGLERT, INC. ENGLERT, INC. ENGLERT, INC. FABRALSERIES 2000 SERIES 1100 SERIES 2400 SLIM SEAMYES YES YES YESYES NO YES YESSNAP-LOCK SNAP-LOCK STANDING SEAM INTEGRAL STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24 / KYNAR 550, 24, 26 / KYNAR 500, 22, 24 / KYNAR 500, 24 / KYNAR 500HYLAR 5000, MILL HYLAR 5000, MILL HYLAR 5000, MILL22, 24 / KYNAR 500, 24, 26 / KYNAR 500, 22, 24 / KYNAR 500, 24 / KYNAR 500, UNPAINTEDHYLAR 5000, MILL HYLAR 5000, MILL HYLAR 5000, MILL0.032, 0.040 / KYNAR 500, 0.032 / KYNAR 500, 0.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500HYLAR 5000 HYLAR 5000 HYLAR 500016, 20 16, 20 16, 2026200 200 200 4012, 16, 18 16 12, 16, 18 12, 163:12 3:12 1/4:12 1:12OPTIONAL REQUIRED OPTIONAL OPTIONAL30-LB. FELT 30-LB. FELT 30-LB. FELTX X X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2 / N1-3/4 / F 1-1/4 / N 1-1/2 / FX X XXXX1991 1995 1990 1987YES NO NO NODIRECT DIRECT DIRECT10 10 10K. CORCORAN K. CORCORAN K. CORCORAN L. REESEJ. TRIPOD J. TRIPOD J. TRIPOD M. CROCHER, JR.15.1 PSF/15 MIN = 0 NONE NO PENETRATION UNDER 5 GAL-PER-HRSPARY @ 25 PSF PRESSURE DIFFERENTIAL6.24 PSF/MAX .014 CFM/FT SQ NONE MAXIMUM OF 0.09 CU FT PER MINUTEPER SQ FT @ 1.57 PSFUL-90 UL-90 UL-90 UL-90X295

Metal Roof Panels1. COMPANY NAME FABRAL FABRAL2. PRODUCT NAME 2-1/2 SSR 1-1/2 SSR3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description STANDING SEAM ROOF PANEL STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 18, 20, 22, 24, 26 / UNFINISHED, 24 / SUPRE ALURITEStainless Steel (ga.)S.P., KYNAR, VAP18, 20, 22, 24, 26 / MILLGalvalume (ga.)Aluminized Steel (ga.)18, 20, 22, 24, 26 / UNFINISHED,S.P., KYNAR, VAP0.032, 0.04, 0.05 / PLAIN WITH STUCCOEMBOSSING, SP, KYNAR, W/WO STUCCO EMB.Aluminum (ga.) 16Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 42 404D. PANEL WIDTHS (in.) 18 165. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/2:12 1:12Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA)6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 2-1/2 / FSnap Together 1-1/2 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1980 1987Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct)Number of Regional Service LocationsFor Sales Information, Contact: L. REESE L. REESEFor Technical Information, Contact: M. CROUCHER, JR. M. CROUCHER, JR.11. ASTM E331 WATER PENETRATION TEST RESULTS 5 GAL/HR PER SQ FT PRESSURE NO PENETRATION AT 25 PSF(results or none)DIFFERENTIAL 20 PSF 15 MINUTESWATER PENETRATION, NONE12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.0 CU FT/MIN PER SQ FT 0.09 @ 1.57 PSF(results or none)W/20 PSF PRESSURE14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable296

Metal Roof PanelsFABRAL FABRAL FABRAL FOLLANSBEE STEELSTAND'N SEAM 3" SNAP-RIB-SSR GRANDCURVE TCS IIYES NO YES YESYES YES NO NOSTRUCTURAL DOUBLE-LOCK STANDING SEAM STANDING SEAM SNAP-0N BATTEN SEAM DOUBLE LOCK STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24 / KYNAR 500 24, 26 / SILICONIZED POLYESTER, 22, 24 / KYNAR 500KYNAR22 / KYNAR 500, UNPAINTED 24, 26 / SILICONIZED POLYESTER, 22, 24 / KYNAR 500, UNPAINTEDKYNAR, PLAIN24, 26 / PLAIN, S.P.,KYNAR0.032, 0.040 / KYNAR 500 0.032, 0.040 / KYNAR 50016, 20 16,2026, 28 / PREWEATHER WASH COAT ONLY150 42 3512, 16 24 17, 211/2:12 1/2:12 1:12 3:12OPTIONAL NOT USED REQUIRED REQUIRED30-LB. FELT NA 30-LB. FELT ROSIN SIZED PAPERXXXXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2-1/2 / F 1 / N3 / F1-3/4 , 2XXX2 XXX1987 1989 1997 1997NO NO NO NODISTRIBUTORSL. REESE L. REESE L. REESE J. BONARM. CROUCHER, JR. M. CROUCHER, JR. M. CROUCHER, JR. E. THOMASNO PENETRATION UNDER 5 GAL-PER-HR NONE NONESPRAY @ 20 PSF DIFFERENTIALMAXIUMUM OF 0.008 CU FT PER MIN NONE NONEPER SQ FT @ 20 PSFUL-90 UL-60, UL-90 NONEX X X297

Metal Roof Panels1. COMPANY NAME FOLLANSBEE STEEL GALVAMET, INC.2. PRODUCT NAME TERNE II GALVALOK I3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO YESPANEL CONFIGURATION4A. Panel Description DOUBLE LOCK STANDING SEAM STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)22, 24, 26 / BARE, MODIFIEDPOLYESTER, KYNAR 500Galvalume (ga.)Aluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)28, 30 / ACRYLIC SHOP COATZinc (ga.)4C. MAXIMUM LENGTH (lf.) 35 454D. PANEL WIDTHS (in.) 17, 21 12, 18, 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 1/4:12Solid Decking (required, optional, or not used) REQUIRED OPTIONALUnderlayment (type or NA) ROSIN SIZED PAPER RIGID BOARD, ISO, FLEXIBLE FIBERGLASS6. PANEL PROFILEVertical LegXTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees) 1 / NRoll and LockSnap-on CapSnap Together 3 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipXMoveable Clip (designed allowable movement, inches) X 2-1/29. SPECIALTY APPLICATIONSCurvedXTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1998 1995Number of Squares InstalledLicensed Applicator Agreement (yes/no)NOMethod of Distribution (distributors, direct) DISTRIBUTORS DIRECTNumber of Regional Service Locations 22For Sales Information, Contact: J. BONAR J. GEORTNERFor Technical Information, Contact: E. THOMAS J. GEORTNER11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NO LEAKAGE @ 4 PSF(results or none)X12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE 0.043 CFM; 0.029 CFM;(results or none)0.022 CFM @ 4 PSF14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable298

Metal Roof PanelsGALVAMET INC. GARLAND CO., INC, THE INNOVATIVE METALS INNOVATIVE METALSCOMPANY, INC.COMPANY, INC.GALVALOK II R-MER LITE SERIES 300 PANELS SNAP-LOK STANDING SEAMYES YES YES YESYES NO YES YESSTANDING SEAM STRUCTURAL STANDING SEAM ARCHITECTURAL STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24, 26 / BARE, MODIFIED,POLYESTER, KYNAR 50024 / UNFINISHED30 / SILICONE MODIFIED POLYESTER, 22, 24 / KYNAR, UNFINISHED 22, 24 / KYNAR, UNFINISHEDFLUOROCARBON, PLASTISOL0.032, 0.040, 0.050 / KYNAR 0.032, 0.040 / KYNAR16, 20 / UNFINISHED 16, 20 / UNFINISHED45 100 60 6012, 18, 24 144 12, 16, 18 10, 12, 16, 181/4:12 1/4:12 1/2:12 1-1/2:12OPTIONAL REQUIRED OPTIONAL OPTIONALRIGID BOARD, ISO, FLEXIBLE FIBERGLASS NA 30-LB. FELTXXXFLAT SEAMBATTEN OPTIONALHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONEE3 / F2-3/8 / F2-3/8 / F 1-3/4 / FX2-1/2XXXXX X XXFIELD ROLL1995 1980 1985 1991>100,000 100,000+ 50,000+YES YES YESDIRECT DIRECT DIRET DIRECT22 30 30J. GEORTNER D. SOKOL 800/321-9336 H.C. HOLLISTER H.C. HOLLISTERJ. GEORTNER M. HUBER 800/321-9336 G.R. JONES G.R. JONESNO LEAKAGE @ 4 PSF NONE 0/20 PSF 0/20 PSF0.043 CFM; 0.029 CFM; NONE .0036 SCFM/20 PSF .0022 SCFM/20 PSF0.022 CFM @ 4 PSFUL-90 FM, UL I-60, UL I-90 UL-90, FM I-60, FM I-75, FM I-90 UL-90FM I-75, FM I-20, FM I-135299

Metal Roof Panels1. COMPANY NAME INNOVATIVE METALS INNOVATIVE METALSCOMPANY, INC.COMPANY, INC.2. PRODUCT NAME PERM-LOC STANDING SEAM SS PANEL SYSTEM3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO NOPANEL CONFIGURATION4A. Panel Description ARCHITECTURAL STANDING SEAM ARCHITECTURAL STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.) 24 / KYNAR, 24 / KYNAR, UNFINISHEDAluminized Steel (ga.)UNFINISHEDAluminum (ga.) 0.032 / KYNAR 0.032 / KYNARCopper (ga.)Terne Metal (ga.)16, 20 / UNFINISHEDZinc (ga.)4C. MAXIMUM LENGTH (lf.) 45 454D. PANEL WIDTHS (in.) 13, 21 14-1/2 , 22-1/25. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 3:12Solid Decking (required, optional, or not used) REQUIRED REQUIREDUnderlayment (type or NA) 30-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 1 / FSnap Together 7/8 / N8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurved X XTapered X XOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1986 1981Number of Squares Installed 50,000+ 50,000+Licensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 30 30For Sales Information, Contact: H.C. HOLLISTER H.C. HOLLISTERFor Technical Information, Contact: G.R. JONES G.R. JONES11. ASTM E331 WATER PENETRATION TEST RESULTS 0/20 PSF(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0/577/20 PSF(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable300

Metal Roof PanelsIPS INSULATED IPS INSULATED MBCI MBCIPANEL SYSTEMSPANEL SYSTEMSRWP ROOFING PANEL SSP ROOFING PANEL ULTRA-DEK 124 DOULBE-LOK 124YES YES YES YESYES YES YES YESPRE-INSULATED ROLL-FORMED MULTI-RIB PRE-INSULATED ROLL-FORMEDSTANDING SEAMSTANDING SEAMTHICKNESSES / FINISHES THICKNESSESSTANDING/SEAMFINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24, 26 / KYNAR, 22, 24 / KYNAR 500,SILICON POLYESTERSILICON POLYESTER22, 24, 26 / KYNAR 500, SILICON 22, 24, 26 / KYNAR 500, SILICON 22, 24, 26 / BARE, SIGNATURE 200, 22, 24, 26 / BARE, SIGNATURE 200,POLYESTER UNFINISHED POLYESTER UNFINISHED 300 (PVDF), OR 300 METALLIC 300 (PVDF), OR 300 METALLIC48 48 50 (STANDARD) 50 (STANDARD)36 25 12, 18, 24 12, 18, 240.05 1/4:12 1/4:12 1/4:12NOT USED NOT USED OPTIONAL OPTIONALNANAX X X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1 -1/42-7/8 / E 3 / F2-7/8 / E 3 / FXXXX1/2 2-1/2 (1-1/4 EACH DIRECTION) 2-1/2 (1-1/4 EACH DIRECTION)XX1981 1986 1983 1983NO NO YES YESDIRECTDIRECT21 21A. ANDREWS A. ANDREWS W. DICKINSON W. DICKINSONR. WILMER R. WILMER T. WOLFE T. WOLFENO LEAKAGE @ 20 PSF NO LEAKAGE @ 20 PSF NO LEAKAGE @ 4 PSF NO LEAKAGE @ 4 PSFDIFFERENTIAL PRESSUREDIFFERENTIAL PRESSURENO LEAKAGE @ 20 PSF NO LEAKAGE @ 20 PSF 0.022 CFM/SQ FT @ 4 PSF 0.022 CFM/SQ FT @ 4 PSFDIFFERENTIAL PRESSUREDIFFERENTIAL PRESSUREUL-90 UL-90 UL-90301

Metal Roof Panels1. COMPANY NAME MBCI MBCI2. PRODUCT NAME CRAFTSMAN SERIES HIGH BATTEN CRAFTSMAN SERIES LARGE BATTEN3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO NOPANEL CONFIGURATION4A. Panel Description LOCK FORM SEPARATE BATTEN LOCK FORM SEPARATE BATTEN4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.)Aluminized Steel (ga.)22, 24, 26 / BARE, COLOR BOND, SIGNATURE 22, 24, 26 / BARE, COLOR BOND, SIGNATURE200, 300 (PVDF), OR 300 METALLIC 200, 300 (PVDF), OR 300 METALLICAluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 50 (STANDARD) 50 (STANDRAD)4D. PANEL WIDTHS (in.) 12, 16-1/2 12, 16-1/25. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 3:12Solid Decking (required, optional, or not used) REQUIRED REQUIREDUnderlayment (type or NA) 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT6. PANEL PROFILEVertical LegTrapezoidalBatten X XOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 2 / F 2 / FSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip Clip X XMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther TRANSITION, ROOF TO FASCIA, MANSARD TO SOFFIT TRANSITION, ROOF TO FASCIA, MANSARD TO SOFFIT10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1983 1983Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 21 21For Sales Information, Contact: W. DICKINSON W. DICKINSONFor Technical Information, Contact: T. WOLFE T. WOLFE11. ASTM E331 WATER PENETRATION TEST RESULTS NO LEAKAGE @ 4 PSF NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.048 CFM/SQ FT @ 4 PSF; NONE(results or none)0.045 CFM/SQ FT14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable302

Metal Roof PanelsMBCI MBCI MBCI MBCICRAFTSMAN SERIES SMALL BATTEN LOKSEAM BATTENLOK SLIMLINEYES YES YES YESNO YES YES NOLOCK FORM SEPARATE BATTEN STANDING SEAM STANDING SEAM 1 X 16 INTERLOCKING ARCHITECTURALTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSESSTANDING SEAM/ FINISHESROOF22, 24, 26 / BARE, COLOR BOND, SIGNATURE 22, 24, 26 / BARE, SIGNATURE 200, 22, 24, 26 / BARE, SIGNATURE 200, 24, 26, 29 / SMP, PVDF,200, 300 (PVDF), OR 300 METALLIC 300 (PVDF), OR 300 METALLIC 300 (PVDF), OR 300 METALLIC SIGNATURE 200, 300, 300 METALLIC50 (STANDRAD) 50 (STANDARD) 50 (STANDARD) 5012, 16-1/2 12, 16, 18 12, 16 12, 163:12 3:12 1/4:12 3:12REQUIRED OPTIONAL OPTIONAL REQUIRED30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 15-LB. FELTX X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2 / F1 / F1-3/4 / F 1 / NXXXXXTRANSITION, ROOF TO FASCIA, MANSARD TO SOFFITTRANSITION, ROOF TO FASCIA, MANSARD TO SOFFIT1983 1991 1991 1989NO NO YES NODIRECT DIRECT DIRECT DIRECT21 21 21 21W. DICKINSON W. DICKINSON W. DICKINSON W. DICKINSONT. WOLFE T. WOLFE T. WOLFE T. WOLFENONE NO LEAKAGE @ 1.57 PSF NO LEAKAGE @ 1.57 PSF NONENONE 0.0160 CFM/SQ FT @ 1.57 PSF 0.000 @ 1.57 PSF NONEUL-90 UL-90 UL-90 NONE303

Metal Roof Panels1. COMPANY NAME MBCI MBCI2. PRODUCT NAME S-36 SUPERLOK3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description 1-1/2 X 12 X 36 EXPOSEDSTANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSESFASTENER/PANELFINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.) 22, 24, 26, 29 / SMP, PVDF, BARE 22, 24, 26 / BARE, SIGNATURE 200SIGNATURE 200, 300, 300 METALLIC 300, METALLICAluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 55 504D. PANEL WIDTHS (in.) 36 16, 125. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/2:12 1/2:12Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA)6. PANEL PROFILEVertical LegTrapezoidalBatten15-LB. FELTOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 1/2 / FRoll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and Lock 2 / FSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip ClipMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedXXXXX2" (I" EACH DIRECTION)Other10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1991 1993Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO YESMethod of Distribution (distributors, direct) DIRECT DIRECTNumber of Regional Service Locations 21 2For Sales Information, Contact: W. DICKINSON W. DICKINSONFor Technical Information, Contact: T. WOLFE T. WOLFE11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE 0.007 @ 6.24 PSF(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable304

Metal Roof PanelsMBCI MBCI MCELROY METAL INC. MCELROY METAL INC.PBR-36 7.2 MASTERLOK-90 MEDALLION I & IIYES YES YES YESYES YES YES NO1-1/4 X 12 X 36 EXPOSED1-1/2 X 7.2 X 36 SNAP-ON STANDING SEAM BATTEN CAPTHICKNESSESFASTENER/PANELFINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24, 26, 29 / SMP, UNFINISHED26 / BARE, SMP, PVDF, 22, 24, 26, 29 / SIGNATURE 200, 300, 22, 24, 26 / KYNAR, UNFINISHED 22, 24 / KYNAR, UNFINISHEDSIGNATURE 200, 300 300 METALLIC56 55 50 4036 36 12, 18, 24 12, 14, 16, 18, 201/2:12 1/2:12 1/4:12 0.133333333OPTIONAL OPTIONAL OPTIONAL REQUIRED15-LB. FELT 30-LB. FELT 30-LB. FELTX X XXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/4 / F3 / F1, 1-1/2 / NXXXXXX1977 1991 1986 1990NO NO NO NODIRECT DIRECT DISTRIBUTORS / DIRECT DISTRIBUTORS / DIRECT21 21 16 16W. DICKINSON W. DICKINSON K. GIESEKE K. GIESEKET. WOLFE T. WOLFE E. OSTEN E. OSTENNONE NO PENETRATION AT 12 PSF NO LEAKAGE NO LEAKAGEW/ 5 GAL/HR (8"/HR)NONE YES 0.02 @ 1.57 PSF 0.005 @ 1.57 PSFUL-90 UL-90 UL-90 UL-90305

Metal Roof Panels1. COMPANY NAME MCELROY METAL INC. MCELROY METAL INC.2. PRODUCT NAME MEGA-RIB MULTI-RIB3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description OVERLAPPING OVERLAPPING4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)18, 20 / KYNAR,UNFINISHEDGalvalume (ga.) 22, 24, 26 22, 24, 26, 29 / KYNAR, SILICONIZEDAluminized Steel (ga.)POLYESTER, UNFINISHEDAluminum (ga.)Copper (ga.)Terne Metal (ga.)0.024, 0.032 / MILL,STUCCO EMBOSSEDZinc (ga.)4C. MAXIMUM LENGTH (lf.) 40 494D. PANEL WIDTHS (in.) 36 365. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 0.05 0.05Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA) 30-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical LegTrapezoidal X XBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlapped 1-1/2 / E 1-1/4 / ECrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, Exposed X XThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip ClipMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1990 1965Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct) DISTRIBUTORS / DIRECT DISTRIBUTORS / DIRECTNumber of Regional Service Locations 16 16For Sales Information, Contact: K. GIESEKE K. GIESEKEFor Technical Information, Contact: E. OSTEN E. OSTEN11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable306

Metal Roof PanelsMCELROY METAL INC. MCELROY METAL INC. MCELROY METAL INC. MCELROY METAL INC.MAX-RIB MULTI-COR M-COR MEDALLION-LOKYES NO NO YESYES YES YES YESOVERLAPPINGOVERLAPPINGTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES29 / KYNAR, 29 / UNFINISHEDUNFINISHED22, 24, 26, 29 / KYNAR, SILICONIZED 22, 24, 26 / KYNAR, UNFINISHED 22, 24, 26, 29 / KYNAR, UNFINISHED 22, 24 / KYNAR 500, UNFINSIHEDPOLYESTER, UNFINISHED0.017, 0.024 / MILL, 0.024, 0.032 / MILL, 0.024, 0.032 / MILL,STUCCO EMBOSSED STUCCO EMBOSSED STUCCO EMBOSSED40 40 40 4038 29-1/4, 32 34-3/4, 37-3/8 16, 180.091666667 0.05 0.091666667 0.133333333OPTIONAL OPTIONAL OPTIONAL OPTIONAL30-LB. FELT 30-LB. FELT. 30-LB. FELT 30-LB. FELTXCORRUGATEDCORRUGATEDHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE3/4 / E 1/2 / E7/8 / E1-3/4 / FX X XX1976 1976 1983 1993NO NO NO NODISTRIBUTORS / DIRECT DISTRIBUTORS / DIRECT DISTRIBUTORS / DIRECT DISTRIBUTORS / DIRECT16 16 16 16K. GIESEKE K. GIESEKE K. GIESEKE K. GIESEKEE. OSTEN E. OSTEN E. OSTEN E. OSTENNONE NONE NONE NO LEAKAGENONE NONE NONE .57 @ 1.57 PSFNONE NONE NONE UL-90307

Metal Roof Panels1. COMPANY NAME MERCHANT & EVANS, INC. MERCHANT & EVANS, INC.2. PRODUCT NAME INTERLOCK-18 ZIP RIB3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description INTERLOCKING INTERLOCKING, MECHANICALLY SEAMED4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 22, 24 / KYNAR 500 18, 20, 22, 24 / KYNAR 500Stainless Steel (ga.)24 / MILLGalvalume (ga.) 22, 24 / KYNAR 500, MILL 18, 20, 22, 24 / KYNAR 500, MILLAluminized Steel (ga.) 22, 24 / KYNAR 500, 18, 20, 22, 24 / KYNAR 500,MILLAluminum (ga.) 0.032, 0.040 / KYNAR 500, 0.032, 0.040, 0.050 / KYNAR 500,MILL, ANODIZEDMILLMILL, ANODIZEDCopper (ga.) 16, 20 / MILL 16, 20 / MILLTerne Metal (ga.)Zinc (ga.)0.027 / MILL4C. MAXIMUM LENGTH (lf.) 60 1054D. PANEL WIDTHS (in.) 10, 18 12, 165. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 0.05 1/4:12Solid Decking (required, optional, or not used) OPTIONAL OPTIONALUnderlayment (type or NA) NA NA6. PANEL PROFILEVertical Leg X XTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and Lock 2 / F 2-1/2 / FSnap-on CapSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip Clip X XMoveable Clip (designed allowable movement, inches) UNLIMITED 394839. SPECIALTY APPLICATIONSCurvedXTapered X XOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1991 1964Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO YESMethod of Distribution (distributors, direct)Number of Regional Service LocationsFor Sales Information, Contact: D. BROWN D. BROWNFor Technical Information, Contact: T. THOMPSON T. THOMPSON11. ASTM E331 WATER PENETRATION TEST RESULTS NO PENETRATION @ 15 PSF NO PENETRATION @ 15 PSF(results or none) FOR 15 MINUTES FOR 15 MINUTES12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.005 CFM/SQ FT @ 6.24 PSF 0.005 CFM/SQ FT @ 6.24 PSF(results or none) DIFFERENTIAL DIFFERENTIAL14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKED X XNA=not applicable308

Metal Roof PanelsMERCHANT & EVANS, INC. MERCHANT & EVANS, INC. MERCHANT & EVANS, INC. MERCHANT & EVANS, INC.B 1515 R #114 R # 305 # 306YES YES YES YESNO NO NO NOBATTEN SEAM INTEGRAL BATTEN SEAM INTEGRAL STANDING SEAM BATTEN SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 50022, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 500, MILL22, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 500 22, 24 / KYNAR 5000.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500, 0.032, 0.040 / KYNAR 500,MILL, ANODIZED MILL, ANODIZED MILL, ANODIZED MILL, ANODIZED16, 20 / MILL 16, 20 / MILL 16, 20 / MILL 16, 20 / MILL0.027 / MILL 0.027 / MILL 0.027 / MILL 0.027 / MILL60 60 60 4511, 15, 18, 22 9-3/4, 13, 17 12, 15-1/4, 19-1/4 10-1/8, 14, 17-1/2, 21-1/2, 222;12 0.091666667 0.091666667 0.091666667REQUIRED REQUIRED REQUIRED REQUIRED30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FLET OR EQUIVALENTXX X XHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/2 / N 1, 1-1/4, 1-1/2, 2 / F1-1/4 / N 1-3/8 / FX X XXXXXX1971 1968 1984 1989NO NO NO NOD. BROWN D. BROWN D. BROWN D. BROWNT. THOMPSON T. THOMPSON T. TH OMPSON T. THOMPSONNONE NONE NO PENETRATION @ 15 PSF FOR 15 MINUTES NO PENETRATION @ 15 PSFFOR 15 MINUTESNONE NONE 0 CFM @ 6.24 PSF 0 CFM @ 6.24 PSFNONE NONE UL-90 UL-90309

Metal Roof Panels1. COMPANY NAME MERCHANT & EVANS, INC. METAL SALESMANUFACTURING CORP.2. PRODUCT NAME DOME ROOF SYSTEM (BD 1520) MAGNA-LOC3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO YESPANEL CONFIGURATION4A. Panel Description BATTEN SEAM STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)Galvalume (ga.)22, 24 / KYNAR 500 (PVF2), BAREAluminized Steel (ga.)Aluminum (ga.) 0.032, 0.040 / KYNAR 500,Copper (ga.)Terne Metal (ga.)MILL, ANODIZED16, 20 / MILLZinc (ga.)0.027 / MILL4C. MAXIMUM LENGTH (lf.) 45 454D. PANEL WIDTHS (in.) UP TO 46-1/2 16, 185. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/4:12 1/2:12Solid Decking (required, optional, or not used) REQUIRED OPTIONALUnderlayment (type or NA)6. PANEL PROFILEVertical LegTrapezoidalBatten30-LB. FELT OR EQUIVALENTOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 2 / FRoll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 2 / NSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip ClipXMoveable Clip (designed allowable movement, inches) 29. SPECIALTY APPLICATIONSCurvedXTaperedOtherDOME10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1990 1998Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO YESMethod of Distribution (distributors, direct)DIRECTNumber of Regional Service Locations 12For Sales Information, Contact: D. BROWN D. CUNNINGHAMFor Technical Information, Contact: T. THOMPSON D. KIRCHGESSNER11. ASTM E331 WATER PENETRATION TEST RESULTS NO PENETRATION @ 15 PSF NO LEAKAGE(results or none)FOR 15 MINUTESXXX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE 0.060 CFM/SQ FT(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 FM, UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable310

Metal Roof PanelsMETAL SALES PETERSEN ALUMINUM PETERSEN ALUMINUM PETERSEN ALUMINUMMANUFACTURING CORP. CORP. CORP. CORP.SEAM-LOC 24 INTEGRAL BATTEN REDI-R00F STANDING SEAM SNAP-ON STANDING SEAMYES YES YES YESYES NO NO NOSTANDING SEAM BATTEN STANDING SEAM STANDING SEAM STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR 500 24 / KYNAR 500 24 / KYNAR 50022, 24 / KYNAR 500 (PVF2), BARE0.032 / KYNAR 500 0.032 / KYNAR 500 0.032 / KYNAR 50045 45 45 4524 11, 18, 19 12, 18, 20 12, 16, 18, 201/4:12 3:12 3:12 3:12OPTIONAL REQUIRED REQUIRED REQUIRED30-LB. FELT 30-LB. FELT 30-LB. FELTXXXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2-11/16 / F1-1/2 / N1-1/2 / N1 / NX X X2XXX1979 1979 1990 1979> 100,000 > 100,000 > 100,000YES NO NO NODIRECT DISTRIBUTORS, DIRECT DISTRIBUTORS, DIRECT DISTRIBUTORS, DIRECT12 4 4 4D. CUNNINGHAM 800/323-1960 800/323-1960 800/323-1960D. KIRSCGESSNER 800/323-1960 800/323-1960 800/323-1960NO LEAKAGE NO LEAKAGE @ 12 PSF NO LEAKAGE @ 12 PSF NO LEAKAGE @ 12 PSF0.060 CFM/SQ FT 0.008 CFM/SQ FT @ 1.57 PSF 0.004 CFM/SQ FT @ 1.57 PSF 0.006 CFM/SQ FT @ 1.57 PSFUL-90 UL-90 UL-90 UL-90311

Metal Roof Panels1. COMPANY NAME PETERSEN ALUMINUM PETERSEN ALUMINUMCORP.CORP.2. PRODUCT NAME HIGH SNAP-ON \ STANDING SEAM INTEGRAL STANDING SEAM3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO NOPANEL CONFIGURATION4A. Panel Description STANDING SEAM STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 24 / KYNAR 500 24 / KYNAR 500Stainless Steel (ga.)Galvalume (ga.)Aluminized Steel (ga.)Aluminum (ga.) 0.032 / KYNAR 500 0.032 / KYNAR 500Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 45 454D. PANEL WIDTHS (in.) 11, 18, 19 11, 18, 195. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 3:12Solid Decking (required, optional, or not used) REQUIRED REQUIREDUnderlayment (type or NA) 30-LB. FELT 30-LB. FELT6. PANEL PROFILEVertical LegXTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and Lock 1-1/2 / NSnap-on Cap 1-1/2 / NSnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedXTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1979 1979Number of Squares Installed > 100,000 > 100,000Licensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct) DISTRIBUTORS, DIRECT DISTRIBUTORS, DIRECTNumber of Regional Service Locations 4 4For Sales Information, Contact: 800/323-1960 800/323-1960For Technical Information, Contact: 800/323-1960 800/323-196011. ASTM E331 WATER PENETRATION TEST RESULTS NO LEAKAGE @ 12 PSF NO LEAKAGE @ 12 PSF(results or none)XX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS 0.005 CFM/SQ FT @ 1.57 PSF 0.02 CFM/SQ FT @ 1.57 PSF(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable312

Metal Roof PanelsPETERSEN ALUMINUM PETERSEN ALUMINUM PETERSEN ALUMINUM STEELOX ROOFCORP. CORP. CORP. SYSTEMSSNAP-ON BATTEN REDI-ROOF BATTEN SNAP-CLAD LRX (STEELOX LOCK RIB)YES YES YES YESNO NO YES YESBATTEN STANDING SEAM BATTEN STANDING SEAM STANDING SEAM VERTICAL RIB STANDING SEAMTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES24 / KYNAR 500 24 / KYNAR 500 22, 24 / KYNAR 50022, 24 / 70% KYNAR, UNPAINTED0.032 / KYNAR 500 0.032 / KYNAR 500 0.032 / KYNAR 50045 45 45 6511, 12, 18 12 10, 12, 16, 18 163:12 3:12 2:12 1/4:12REQUIRED REQUIRED OPTIONAL OPTIONAL30-LB. FELT 30-LB. FELT 30-LB. FELT 30-LB. FELTX X XXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE2 / F1-1/2 / N 1-1/2 / N1-3/4 / FXXX X X X2XXX1979 1989 1993 1934> 100,000 > 100,000 > 100,000 2 BILLIONNO NO NO YESDISTRIBUTORS, DIRECT DISTRIBUTORS, DIRECT DISTRIBUTORS , DIRECT4800/323-1960 800/323-1960 800/323-1960 T. COLBERT 513/573-5200800/323-1960 800/323-1960 800/323-1960 M. ADE 513573-5200NO LEAKAGE @ 12 PSF NO LEAKAGE @ 12 PSF NO LEAKAGE @ 12 PSF NO INFILTRATION0.02 CFM/SQ FT @ 1.57 PSF 0.03 CFM/SQ FT @ 1.57 PSF 0.04 CFM/SQ FT @ 1.57 PSF 0.012 CFM/SQ FT @ 6.24 PSFUL-90 UL-90 UL-90 UL, CLASS 90,FM I-60, FM I-120313

Metal Roof Panels1. COMPANY NAME STEELOX ROOF UNITED STEELSYSTEMSDECK, INC.2. PRODUCT NAME SENTRY XTR UNI-LOK3. ARCHITECTURAL APPLICATIONS (yes/no) NO YESSTRUCTURAL APPLICATIONS (yes/no) YES YESPANEL CONFIGURATION4A. Panel Description STANDING SEAM SNAP-TOGETHER STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)22, 24, 26 / SILICONIZED POLYESTER,FLUOROCARBON, PLASTISOLGalvalume (ga.) 22, 24 / 70% KYNAR, UNPAINTED 22, 24, 26 / UNFINISHEDAluminized Steel (ga.)22, 24, 26 / UNFINISHEDAluminum (ga.)Copper (ga.)Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 604D. PANEL WIDTHS (in.) 24 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/2:12 1/4:12Solid Decking (required, optional, or not used)Underlayment (type or NA)6. PANEL PROFILEVertical LegOPTIONAL30-LB. FELT OR EQUIVALENTTrapezoidal X XBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on CapSnap Together 3 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipXMoveable Clip (designed allowable movement, inches) 2 29. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1997 1984Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES NOMethod of Distribution (distributors, direct)Number of Regional Service LocationsFor Sales Information, Contact: T. COLBERT 513/573-5200 908/277-1617For Technical Information, Contact: M. ADE 513573-5200 J. MATTINGLY11. ASTM E331 WATER PENETRATION TEST RESULTS NONE(results or none)12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90F16. SEE APPENDIX IF CHECKEDNA=not applicable314

Metal Roof PanelsUNITED STEEL UNITED STEEL UNITED STEEL UNITED STEELDECK, INC. DECK, INC. DECK, INC. DECK, INC.UNILINE RP UNIRIB C36 SS18 STANDING SEAM UTILITY RIBYES YES YES YESYES YES YES YESEXTERIOR EXPOSED FASTENER EXTERIOR EXPOSED FASTENER EXTERIOR EXPOSED FASTENER EXTERIOR EXPOSED FASTENERTHICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHES22, 24, 26 / SILICONIZED POLYESTER, 18, 20, 22, 24 / SILICONIZED POLYESTER, 18, 20, 22, 24 / SILICONIZED POLYESTER, 24, 26 / SILICONIZED POLYESTER,FLUOROCARBON, PLASTISOL FLUOROCARBON, PLASTISOL FLUOROCARBON, PLASTISOL FLUOROCARBON, PLASTISOL22, 24, 26, / UNFINISHED 22, 24, / UNFINISHED 22, 24, / UNFINISHED22, 24, 26 / UNFINISHED0.032, 0.04, 0.05 / UNFINISHED 0.032, 0.04, 0.05 / UNFINISHED 0.032, 0.04, 0.05 / UNFINISHED40 40 40 4036 36 18 301:12 1:12 1/2:12 3:12OPTIONAL OPTIONAL OPTIONAL OPTIONAL30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENTX X XXHEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE E = FIELD APPLIED; N = NONE1-1/4 / E 1-1/2 / E 2-5/16 / E 9/16 / EX X X X1978 1978 1987 1978NO NO NO NO908/277-1617 908/277-1617 908/277-1617 908/277-1617J. MATTINGLY J. MATTINGLY J. MATTINGLY J. MATTINGLYNONE NO LEAKAGE @ 6.24 PSF NONE NONENONE 0.012 CFM/SQ FT @ 1.57 PSF NONE NONEUL-90 NONE NONE NONE315

Metal Roof Panels1. COMPANY NAME UNITED STEEL VINCENTDECK, INC.METAL GOODS2. PRODUCT NAME U230 COLORKLAD SYSTEM 13. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES NOPANEL CONFIGURATION4A. Panel Description EXTERIOR EXPOSED FASTENER SNAP SEAM STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 18, 20, 22, 24 / SILICONIZED POLYESTER, 24 / KYNAR 500,Stainless Steel (ga.)FLUOROCARBON, PLASTISOLUNFINISHED24 / UNFINISHEDGalvalume (ga.)22, 24 / UNFINISHEDAluminized Steel (ga.)Aluminum (ga.) 0.032, 0.04, 0.05 / UNFINISHED 0.032 / KYNAR 500Copper (ga.) 16Terne Metal (ga.)Zinc (ga.)4C. MAXIMUM LENGTH (lf.) 40 404D. PANEL WIDTHS (in.) 30 12, 16, 18, 225. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1:12 3:12Solid Decking (required, optional, or not used) OPTIONAL REQUIREDUnderlayment (type or NA) 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT6. PANEL PROFILEVertical LegXTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlapped 2 / ECrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees)Roll and LockSnap-on Cap 1, 1-1/2 / ESnap Together8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipSlip ClipMoveable Clip (designed allowable movement, inches)9. SPECIALTY APPLICATIONSCurvedTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1989 1970Number of Squares InstalledLicensed Applicator Agreement (yes/no) NO NOMethod of Distribution (distributors, direct)DISTRIBUTORSNumber of Regional Service Locations 45For Sales Information, Contact: 908/277-1617 R. OEHME 612/717-9000For Technical Information, Contact: J. MATTINGLY R. OEHME 612/717-900011. ASTM E331 WATER PENETRATION TEST RESULTS NONE NONE(results or none)XXXX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE NONE(results or none)14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE NONE16. SEE APPENDIX IF CHECKEDNA=not applicable316

Appendix, Roof CoveringsALLIED SIGNALSelected AlliedSignal roof membrane specifications areavailable with a protected roof membrane assemblythermal overlay incorporating extruded polystyreneinsulation board with aggregate surfacing.AMERICAN BUILDING ROOFING ANDARCHITECTURAL PRODUCTSAll American Building Company’s roof systems areavailable in a paragraph Premium 70 Plus paint finish,which as a Kynar 500 resin. It has a proprietary highbuilldprimer and special long-life ceramic pigments. Ithas a chalk rating no lower than than 9 and a fade nohigher than 4 NBS over 20 years. It is warranted for 25years based on actual field testing. It is maintenancefreeand graffiti-proof.ATAS INTERNATIONAL, INC.Atas Internatiopnal, Inc. offers metal rofoing systems ina wide variety of panel profiles, from standing seamand batten seam to tile configuration. Presently it hasover twenty standard colors available in afluoropolymer Kynar 500 coating, in 24-gaugegalvanized steel, and 0.032, 0.040, and 0.050aluminum. Contact Atas International, Inc. at 610-395-8445 for further information on its products andapplicable warranties.BARRETT COMPANYThe Barrett Ram-Tough Elastomeric Built-up <strong>Roofing</strong>System uniquely combines the elastomeric propertiesof single-ply with the application techniques of built-uproofing. The modified asphalt bitumens are engineeredfrom a select blend of highly refined unoxidized asphaltand Shell Kraton block copolymer rubber.Conventional asphalt bitumens and cold processmastics are available options. The "felts," or fabricreinforcement, are either polyester, fiberglass, modifiedbitumen, or a combination thereof depending uponspecification used. Unlike other rubberized asphalts,the Ram-Tough KLB-100 and K-312 bitumens can bemelted in conventional direct-fired roofing kettleswithout degradation, they are pumpable, and can beapplied with conventional hot dispensers and mops.Flashing details are standard built-up roofing detailsgenerally in conformance with NRCA standard detailspecification plates. A base sheet is required onuninsulated nailable decks.Utilizing the Ram-Tough Elastomeric Built-up<strong>Roofing</strong> Systems, the approved roofing contractor, ineffect, "manufacturers" in the field his own monolithic,modified-bitumen sheet without the laps and seamstraditionally associated with preformed modifiedbitumen sheets. The completed polyester-reinforcedsystems afford high elongation, exceptional usablestress/strain properties, high puncture resistance, "self-curing" cold flow, crack bridging capabilities,exceptional low-temperature flexibility, and otherperformance features normally associated withelastoplastic single plies.Because of the uniqueness of each individualreroofing project, Barrett should be consulted beforewriting specifications for actual use in a reroofingapplication. Unusual roof situations are also encounteredfrom time to time and design and specificationassistance is available to the contractor, architect,engineer, or owner upon request for freezer and coldstoragewarehouses, high interior humidity conditions,temporary roofing, and most other unusual roofingproblems.Barrett does not endorse BSS #55 and encouragesadoption of "strain energy" load-elongation test criteria(in conformance with NBS-IR 86-3418, Rossiter &Bentz; NBS-IR 86-3347, Busching, Rossiter & Mathey)as being more relevant to actual in-situ field conditions.Elastomeric interply adhesive meets ASTM 6152-97.BERRIDGE MANUFACTURING CO.Berrided Tee-Panel, High Seam Tee-Panel, BattenSeam, Zee-Lock, Double-Lock, Cee-Lock, andBermuda Roof may be roll formed on site in continuouslengths with a Berridge portable roll former.BITEC, INC.Bitec Mineral Design MDA and MDS are APP and SBSpattern design products available in eight differentdesigns with a variety of color combinations. MDA, anAPP product, can be used when APM-4T is used fortorch application. MDS, an SBS product, can be usedwhen SPM-4H is used and may be applied with hotasphalt or SBS modified cold adhesive.BONDCOTE ROOFING SYSTEMSBarrett does not endorse BSS #55 and encouragesadoption of "strain energy" load-elongation test criteria(in conformance with NBS-IR 86-3418, Rossiter &Bentz; NBS-IR 86-3347, Busching, Rossiter & Mathey)as being more relevant to actual in-situ field conditions.BondCote FleeceBond 1000 membrane combinesthe proven 350 Series membrane with a high-strengthpolyester fleece fabric in the factory. FleeceBond 1000is designed to be installed directly over roof insulationor smooth rigid substrates, such as BUR or plywoodwhen mechanically fastened. FleeceBond may also befully adhered with contact adhesive or hot asphalt to avariety of BondCote-approved substrates.AllBondCote membranes are available in a varietyof custom colors under the BondCote Spectrumproduct category. Underwriters Laboratories Class Aand B fire ratings are available with a number ofstandard colors.317

BUTLER MANUFACTURING COMPANYMR-24 is factory prepunched and is applied only toprepunched or field-drilled structurals. A layer of facedblanket insulation is placed between the purlins andMR-24 for energy conservation and to eliminatecondensation.CMR-24 utilizes a continuous corrugated metal linerpanel (decking) with rigid insulation board and thedouble lock standing seam roof system (MR-24).CMR-24 is factory prepunched and is applied only toprepunched or field-drilled structures. A vapor retarderis placed between the corrugated liner and the rigidboard insulation.VSR can be used structurally (over bar joists orpurlins 5 feet on center) or directly over decking (steelor wood) with clip spacing at 30 inches on center.Blanket insulation should be used when VSR is usedwithout decking over structural members. Rigid boardinsulation (Thermax by Celotex) is preferred overdecking.Genesis7 360 is an architectural panel to be usedprimarily over wood or metal deck. It is a weathertightstanding seam panel system utilizing a ΑPittsburgh≅double-lock seam. Genesis 360 can be installed onslopes as low as 1/2:12" with a weathertightnesswarranty offered. Clip spacing to 32". SMACNA detailsavailable.THE CELOTEX CORP.Built-up roofing specs: All Celotex built-up roofingspecs are published with prefix letters AGS (e.g.,AGS-4-C-G) indicating use of Celo-Glass AGS PlySheet, a premium glass ply sheet with propertiesexceeding ASTM D-2178 Type VI and NBS-BSS #55recommendations. Use of Celotex Celo-Glass AGS PlySheet is required to qualify for Celotex "Specification"Warranty. Celotex APP and Celotex SBS modifiedbitumen products exceed the tensile strengthrecommendations of NBS-BSS #55. Other built-uproofing specs are prefixed with the letters G/A andqualify for warranties other than the specificationwarranty.Celotex base sheets are interchangeable whenused in modified bitumen mopped systems, dependingupon the substrate.Celotex also has available cold process modifiedbitumen systems using Celotex SBS mineral surfacecap sheet with SBS modified bitumen adhesive.Celotex Hydro Stop Vapor Barrier/Venting Base Sheetis designed for use over lightweight insulating concretedecks (see specs indicated by ΑH+...≅). Refer toCelotex literature for details.CERTAINTEED ROOFING PRODUCTS GROUP –COMMERICAL ROOFINGEastern Region: 843/744-7451Central Region: 972/580-5604318Western Region: 510/606-7434CONKLIN COMPANY, INC.Benchmark, Rapid Roof III and Polytuff II coatingsystems are recommended over spray foam systems.Only Benchmark is approved when applications requirecompliance with ICBO, Factory Mutual and Metro DadeCounty Florida. Additionally, Hy-Crown (CSPE) singleplyis ICBO recognized, FM approved and classified byUnderwriters Laboratories. All products comply withEnergyStar Roof Products Program guidelines. Forspecific details contact Conklin Building ProductsDivision.COOLEY ENGINEERED MEMBRANES, INC.Fiberboard may be used for certain applications.Contact CEMI for further information.DERMABIT, WATERPROOFING INDUSTRIES, INC.Dermabit roofing and waterproofing modified bitumenmembranes are manufactured using state-of-the-arttechnology. Dermabit membranes consist of two pliesof APP or SBS modified asphalt reinforced with a oneplypolyester mat. All APP products are sold under theDermabit name. SBS products are sold under theElasphalt name. The product number designates thethickness of the membrane and weight of thereinforcing mat. Thus 4170 indicates a 4mmmembrane with a 170 gram polyester mat.Dermabit also manufactures and sells on a specialorderbasis self-adhering modified bitumen peel andstick as well as membranes with different thicknesses,ranging from 1mm to 5mm, different types ofreinforcements, such as fiberglass, fleece, or polyesterfilm or any combination of the above, depending uponthe application requirement.Dermabit membranes can be torched, hot mopped,cold applied, or self-adhered to all roof decks, includingmetal, wood, or concrete. All Dermabit membranesneed to be applied over an asphalt-saturated basesheet or asphalt base primer. Specification manualscan be ordered free of charge by Don Clark at 302/652-2740, Fax 302/652-0145.All Dermabit and Elasphalt 4170 series modifiedbitumen membranes have successfully passed materialtests conducted by Underwriters Laboratories (UL) andFactory Mutual (FM). Please refer to the appropriateUL and FM guide manuals for specific designs andratings.DIBITENDibiten modified bitumen roofing membranes are APPmodified bitumen bonded to a tough, resilientnonwoven polyester core material. They are availablein both smooth-surfaced (Dibiten Poly/4 and DibitenPoly/5) and slate flake-finished (Dibiten Poly/4.5Granular) varieties. Surface color for Dibiten Poly/4 andDibiten a wide range of colors. All the Dibiten APP

products are torch applied. Dibiten modified bitumenmembranes are well suited for most types of roofingand a variety of waterproofing applications as well.Dibiten recommends their specifications manual beconsulted for application requirements and details priorto application of product. Specifications are availablefor single- or double-layer applications. Somespecifications require application of roof coatings. ULlistedspecifications may be obtained by consulting themost current edition of the Dibiten specificationsmanual, and, because these specifications are subjectto continuous change, the technical department shouldbe consulted for verification of current status. Dibitenmembranes have been used successfully in Europesince the late '60s, and in the U.S. since 1978. Dibitenencourages technical inquiries at their toll free number800/DIBITEN or by calling 303-978-2867 from outsidethese areas.ERSYSTEMSERSystems manufactures and distributes a completeline of elastomeric roof systems.Single Ply: The single-ply systems includePermaweld CPA heat-welded and EPDM membraneroof systems, accessories, and sealants. PolyBondEPDM and Permaweld CPA Fleece Back Membraneshave a non-woven polyester fleece backing makingeach ideal for cushioning irregular surfaces. PermaVacEPDM and CPA are vacuum adhesion methods offastening single-ply membranes to an airtight substrateutilizing vacuum air vents and air distribution strips.The Metal Roof Restoration System is designed torenew a metal roof - protect it from rusting, waterproofall seams, fasteners and roof penetrations withoutfabric or tapes, and restore the metallic finish for longterm preservation. Available as a water-based acrylicsystem or polyurethane system.Spray-Applied Polyurethane Foam: The ER FoamSystem consists of sprayed-in-place polyurethane foamused in conjunction with ERSystems elastomericcoatings. 2.7# and 3.0# roofing foam and 2.0#residential foam is available. ER Foam is typified withhigh density high compressive foam with good yieldand smooth texture. Foam is protected for the UV andweather with acrylic elastomers (Eraguard 1000),polyurethane elastomers (Erathane 300), or siliconeelastomers (Eraguard 4000).FABRALFABRAL's metal roofing panels are offered in a widearray of standard Kynar 500 colors, siliconizedpolyester, and vinyl plastisol. A limited 20-yearnonprorated finish warranty is available, coveringmaterial and labor on replacement. Contact FABRAL atLancaster, Pa. (717) 397-2741, Jackson, Ga. (770)775-4484, Gridley, Ill. (309) 747-2937, Idabel, Okla.(500) 286-7521, or Cedar City, Utah (435) 586-1215.FIRESTONE BUILDING PRODUCTS CO.For information concerning acceptable substrates forRubbergard .090 EPDM, contact Firestone forspecifications.FOAM ENTERPRISES, INC.FE 303-2.5, 2.7, 3.0; FE 302-2.5, 2.7, 3.0; and FE 304-3.0. Spray application techniques and conditions canreflect upon the physical properties of sprayed-in-placefoams. These listings show ranges that are obtainedfrom spraying the compounds per our applicationinstructions.Please consult our instructions for further applicationdetails.FE 314.3.0 This system uses new "blowing agents"and long-term insulation figures are not available at thistime. Initial R-values show 6.25.GACO WESTERN, INC.Gaco Western offers 16 different elastomericcoatings to suite the unique requirements of any roof.GacoFlex specialty coatings include: A-62, a waterbasedacrylic/latex for foam, concrete and plywoodroofs; H-25 hypalon for concrete and plywood roofing;S-1000; UA-60 alpiphatic urethane; E-5325 rustinhibiting epoxy primer for metal roofs; UB-7050 fastseturethane; UA-7000 aliphatic urethane. GacoWestern also offers specialty SPF: PolyFoam 251/303which cures to heavy density rigid polyurethaneinsulation; PolyFoam 275 which cures to a mediumdensity rigid insulation; PolyFoam 190 for use whereambient temperature is below 55F; PolyFoam 240 –two part SPF adheres insulation board and felt-backedsingle-ply to a variety of substrates.G. E. SILICONES division of GENERAL ELECTRICAnswers to questions 9 and 10 are not applicable to thecoating requirement because our coating is applied tothe urethane foam. Our specifications do require thatconcrete and plywood be primed prior to the applicationof the urethane foam. Thermal barriers are required tosatisfy UL and FM ratings. Priming is optional whenspraying urethane to metal or to an existing BUR. Thebase coat and top coat are identical except for color,and they may be used in reverse if a darker top coat isrequested.ICA, INC.ICA, Inc. provides roofing materials and sytems to roofingcontractors who have met specified criteria for financial andprofessional stability and integrity, and therefore, qualify toparticipate in ICA’s building owner referral program. . ICAroofing materials are manufactured to ICA=s stringent319

quality specifications and are available exclusively toICA approved contractors. It is the goal of ICA tocontrol both the level of material quality and installationworkmanship in order to offer the highest possiblequality roofing system to the building owner community.IMPERITALIA S.P.A.New roofing and reroofing: Imper Italia membranes arewell suited to all new roofing and most reroofingapplications. In every circumstance the specifier or theroofing contractor must take into consideration thefollowing requirements: type and condition of thesurfacing, insulation and, most important, ensuringproper drainage. To ensure a good bonding, use aproper primer, such as Impertene Primer or oneapproved by Imper Italia S.P.A.Protection: When the black membranes Paralon NT4or Triplene are applied over an insulation, a lightweightprotection with Elastomul G or Parwenol 4822 Alluminiois recommended. Elastomul G is an acrylic modifiedpaint with a water base available in different colors,white Parwenol 4822 Alluminio is a solvent-basedaluminum paint. Other membranes are already selfprotected.Special instructions: The rolls should be stored incovered warehouses and in a vertical position, and, ifpossible, not stacked. It is recommended that they bestored at a temperature of not less than 41 F. Theyshould be unloaded at the worksite or in the warehousewith care.Note: All membranes are treated with Termotene.Termotene is a patented treatment in which a thin filmof thermoplastic resins is applied to the undersurfaceduring the manufacturing process. Under normalcircumstances, the Termotene treatment performs as aseparating layer between the different turns of the roll,but when heated by flame, it becomes a high-poweradhesive. The advantages one obtains with Termoteneinclude a reduced gas consumption and a greaterspeed of application. It is preferable that the flame ofthe torch be directed to the substrate as well as to themembrane being applied.INTERCONTINENTAL COATINGS CORP. (I-CON)Warranties for these products are currently beingrevised, contact manufacturer for information.KOPPERSBUR: Other: Felts for Spec #410 and #420 incorporatecoal-tar-impregnated glass fiber felts (Tar-Glas), ASTMD4490, which is similar to ASTM D2178 Type IV,except that the felts are coal-tar impregnated. Felts forspec #490 and #495 incorporate coal-tar-impregnatedglass fiber felts (Premium Tar-Glas), ASTM D4490,which is similar to ASTM D2178 Type VI, except thatthe felts are coal-tar-impregnated.Koppers IR Series represents a joint agreementbetween Koppers and Dow Chemical Co. for an320insulated roof membrane assembly incorporatingKoppers coal-tar built-up roofing membrane and DowChemical Co. Styrofoam.Modified Bitumen: Koppers modified bitumenspecifications require a base ply. Multiple plies of TypeIV or Type VI asphalt glass reinforced in asphalt is alsoacceptable under SBS membranes in lieu of a basesheet. Contact Koppers Sales and Service Center at 1-800-558-2706 for additional information.MERCHANT & EVANS INC.Zip Rib structural standing seam roofing has been inuse for over 30 years, with installations from Adak,Alaska to the coast of the Caribbean. It is available insteel and aluminum in both 12-and 16-inch widths. Thesystem utilizes allowable load spans in accordance withASTM E-1592 test procedures, which conservativelydepict field service capabilities, not calculated valuesthat may yield nonconservative allowable load ranges.We offer design and engineering assistance for all ofour products. In addition to our standard offeringslisted, we can offer custom profiles and customcornices to meet specific aesthetic requirements. All ofour products are offered in multiple gauges and invarious materials, including aluminum, copper,stainless steel, and zinc, as well as steel. For furtherinformation, call 1-800-257-6215.MONSEY BAKOR – DIV OF THE HENRY CO.Application: Modified Plus modified bitumen systemsconsist of two plies of SBS modified bitumen or one plyof coated base sheet and one ply of modified bitumen.Modified Plus is flexible at temperatures of -30F andlower. Membranes may be applied on any slope fromdead level to vertical. Good roofing practice calls for aminimum of 1/4 inch in slope. The substrate includesmost common decks, concrete, steel and wood as wellas all commercial insulation. Assemblies include bothconventional and protected membrane applications.Modified Plus systems offer many choices in method ofapplication including hot-roofing asphalt, torch-welding,cold adhesives and self-adhesion. Membranes arelapped 3 inches on the side and 6 inches on the end.The cap sheet is surfaced with granules to provide afinished surface on application.For sales information, contact Walt Mullen at610/933-8888 or 800/523-0268. For technicalinformation in Canada, contact Don Taylor at 905/890-4800 or 800/387-9598, Fax 905/890-4866. Fortechnical information in the United States, contact SkipLeonard at 972/484-4855. The websitewww.henry.com can also be used to contact all ofHenry’s divisions.NATIONAL COATINGS CORP.Acryshield complies with ASTM D 6083-97A, StandardSpecification For Liquid Applied Acrylic Coating Used in<strong>Roofing</strong>. Acryflex complies with both ASTM C920-98,

Standard Specification for Elastomeric Joint Sealantsand Federal Specification TT-S-00230C, Class A.NORTH CAROLINA FOAM INDUSTRIESFigures for nominal density per ASTM D 1622 are inplacevalues; core values are: System 591-2.5, 2.5;System 591-2.8, 2.8; and System 692-2.5, 2.5.Systems 591 and 692 are formulated with HCFC 141Bas the blowing agent.North Carolina Foam Industries offers ten-yearwarranties for the NCFI Graveledfoam <strong>Roofing</strong> System(aggregate-covered polyurethane foam) when installedaccording to specifications by NCFI qualifiedapplicators. The maximum ambient relative humidityvaries with the ambient temperature. NCFI offers achart indicating maximum wet bulb temperatures andmaximum relative humidity for ambient temperaturesbetween 50 and 100 F. The maximum allowable windvelocity with screen depends on the type of windscreen and degree of enclosure. Thermal resistance(R) value varies with the age and condition of allinsulating materials.PERFORMANCE ROOF SYSTEMS, INC.Complete information on the Performance RoofSystems line of Derbigum APP and Permax SBSpolymer modified bitumen roofing products and theirapplication is provided inthe Derbigum specificationsand detail book. A video is available to roofingprofessionals describing the application of Derbigumand Permax membranes with Permastic cold adhesive,a system with a 20-year track record.be assured; only approvals required. All seams shallbe hot-air welded. Sarnafil membranes require no firecoatings.G 476: Sarnafil G 476 membrane should be used ininverted roof membrane assemblies and plaza deckwaterproofing applications. It is reinforced with anonwoven fiberglass mat that provides excellent dimensionalstability. The membrane is formulated withexcellent alkaline resistance. Its integral reinforcementand hot-air-welded seam provide the protection againstwicking and seam degradation needed in invertedapplications, where moisture is constantly present onthe membrane surface.S 327: Sarnafil S 327 membranes should be usedfor mechanically fastened applications. Reinforced withpolyester fabric, the S 327 membrane is specifically designedto provide the necessary characteristics ofelongation and tensile strength to control the stressingof the membrane approved insulations and substratesprovide the code that occurs as a result of dynamicwind loading. The fastening technique is determinedfor each individual job, and is calculated based onbuilding height, ground roughness, and wind zone. Thefastening method is special 20-gauge corrosiveresistantplates or 14-gauge perforated U-shapedgalvanized steel bar secured to deck with corrosionresistantscrews or concrete anchors. Depending onwind uplift conditions, plates are installed in membraneoverlaps and overlaps are hot-air welded, or the U-shaped bar is placed on top of membrane at calculatedspacings and sealed with membrane cover strip hot-airwelded. Sarnafil membranes require no fire coating.SEAMAN CORPORATIONPLASTIC COATINGS CORPORATIONJaxsan products include Jaxsan 600, an acrylicelastomer fibered for extra toughness and to enhancefilm build potential without mudcracking. Jaxsan 607 isnot fibered and may be applied by smaller spraypumps. Plastic Coatings Corp. offers five and ten yearwarranties. Foam primers and metal primers are alsoavailable for use in conjunction with SPF. Call 1-800-279-9151 for details.SARNAFIL INC.G 410: Only Sarnafil G 410 membrane should be usedin fully adhered applications. Reinforced withnonwoven fiberglass mat, the 410 membrane hasexcellent dimensional stability, and a very lowcoefficient of thermal expansion, making total adhesionpossible without shear stresses causing loss ofadhesion. The 410 membrane is available in a varietyof stable colors in addition to the standard white andgray. Adhesives are: Sarnacol 2170, a solvent-basedadhesive and Sarnacol 2121, a water-based adhesivethat is restricted for use during temperatures above 40F and over horizontal water-absorbent substrate only.Compatibility of the membrane with the substrate must321FiberTite <strong>Roofing</strong> Systems are made with a proprietaryformulation based on DuPont Elvaloy KEE chemicallybonded to a dense weft inserted fabric, made ofDuPont Dacron polyester fibers. The membrane ismanufactured in standard 28-in. and 56-in.conventional rolls, along with a variety of prefabricated,standard, and custom rolls up to 20-ft. X 102-ft. (2,040square feet). FiberTite <strong>Roofing</strong> Systems are installedby authorized applicators, either mechanically fasteningthe membrane through an unexposed tab in theprefabricated system, attaching the membrane in aconventional roll goods type application or by fullyadhering to approved substrates, or by applying ballast.All membrane seams are hot-air welded.The FiberTite technical customer servicedepartment provides specification and designassistance to contractors, architects, consultants, andowners. Training, project start-ups, and inspectionsare provided free of charge to authorized applicators byregional technical service representatives. Foradditional information, contact Seaman formulationbased on DuPont Elvaloy KEE chemically bonded to adense weft inserted fabric, made of DuPont Dacronpolyester fibers. The membrane is manufactured instandard 28-in. and 56-in. conventional rolls, along witha variety of prefabricated, standard, and custom rolls

up to 20-ft. X 102-ft. (2,040 square feet). FiberTiteroofing systems are installed by authorized applicators,either mechanically fastening the membrane throughan unexposed tab in the prefabricated system,attaching the membrane in a conventional roll goodstype application or by fully adhering to approvedsubstrates, or by applying ballast. All membrane seamsare hot-air welded.The FiberTite technical customer servicedepartment provides specification and designassistance to contractors, architects, consultants, andowners. For additional information, contact SeamanCorporation at 800/927-8578.SIPLASTSiplast developed SBS (Styrene-Butadiene-Styrene)modified bitumens in 1968, which has exceptionalelongation/recovery properties over a wide range oftemperatures. Many Siplast roofs applied in the earlyyears of the SBS blend are still in service today.Siplast’s Veral Aluminium Face, Veral Copper andVeral Stainless Steel SBS Modified Bitumens meet orexceed ASTM D 6298.Siplast is part of the Icopal Group, a multi-nationalindustrial corporation. The Siplast product line includessystems developed specifically for the varied designand field requirements of modern construction. Thesesystems have been applied over all types of deckconstructions in the widely varying climates of overforty countries, from Canada to Saudi Arabia.Domestically, all Siplast roofing products aremanufactured at its plant in Arkadelphia, Arkansas andare stocked at nine warehouse locations across thecountry.TAMKO ROOFING PRODUCTS INC.insulation board. Be sure to install one-way moisturevents.Cold weather application: Modified bitumen may beinstalled at any temperature, although there are severalprecautions that should be observed. Tri-Ply’srecommendations for cold weather applications are asfollows: (1) Rolls may be installed without anyprecautions to approximately 40 degrees F; (2) Below40 degrees F (a) rolls should be kept in heated areas,(b) rolls should be lifted onto the roof and installedquickly without allowing them to become brittle fromfreezing temperatures, (c) rolls should never behandled when frozen – always thaw membrane beforehandling; (3) if cracking does occur: (a) stop installingthe membrane immediately (please notifymanufacturer), (b) the rolls should continue to beheated and installed again when warmer weatherpermits.Cold weather precaution notice: The followingguidelines and precautions should be taken forinstalling an APP modified bitumen membrane in coldweather: Rolls must be stored in an enclosedwarehouse. Warm rolls should be lifted onto the roofand installed quickly without allowing membrane tofreeze and become brittle. Rolls should never behandled when frozen, or allowed to be dropped.Always thaw membrane before handling. Cold weatherapplication may lead to surface cracking if not installedand/or properly prepared. If this cracking occurs, stopinstallation immediately.Tri-Ply membrane protection: Note: Prior to applyingany type of surfacing to the Tri-Ply membrane, themembrane must weather a minimum of 30 days. Aftera minimum of 30 days, apply roof surfacing whenweather permits, as per manufacturer’srecommendations.Awaplan Preium was the first SBS modified asphaltpolyester base roll roofing product in America. Since1977 Awaplan Premium has been applied on differenttypes of roofs all over the country. Awaplan Premiumis manufactured in Joplin, MO using the latest instatistical quality-control methods to insure the roofingcontractor a consistent product. Introduced in June of1986, Awaplan 170 is a variation of Awaplan Premiumproducec on a 180 gram-per-square-meter polyestermat. Awaplan VersaFlex, Awaflex, and Awaflex FR areTamko’s newest addition to the Awaplan family.Tamko produces a complete specfiication manual andtechnical literature for your use. For futher details,contact the Technical Services Division in Joplin, MO at417/624-6644.TRI-PLYTP-4, Karifalt 308, 307, 306: Coal-tar pitch roofs:When reroofing over an existing coal-tar pitch roof, theold roof must be isolated from the new roof. This canbe accomplished by mechanically fastening anapproved base sheet over a minumum 1-in. rigid322

Information on Section 2: Rigid Board Insulation<strong>General</strong> InformationSection 2: Rigid Board Insulation in the 2000 edition ofNRCA’s Low-Slope <strong>Roofing</strong> Materials Guide is dividedinto seven primary sections based on rigid boardinsulation product type. These primary sections are asfollows:• Expanded polystyrene• Extruded polystyrene• Cellular glass• Wood fiberboard• Perlite• Polyisocyanurate• CompositeA specific description of each particular rigid boardinsulation type and a general description of the specificinformation contained within each primary section areincluded at the conclusion of this <strong>General</strong> Informationsection.An index of the manufacturers included in Section 2:Rigid Board Insulation and locations of their specificproducts within this section immediately follows thisRigid Board Insulation section.Expanded PolystyreneExpanded polystyrene (EPS) insulation board is formedwith a polystyrene polymer. The polymer isimpregnated with a foaming agent which, whenexposed to heat, creates an expanded, relativelyuniform, closed-cell material that is resistant to heatflow and moisture penetration.EPS is available in several different densities, severalboard sizes and a number of board thicknesses. EPSis also available in tapered thickness boards.The material standard that applies to EPS is AmericanSociety for Testing and Materials (ASTM) C578, titled“Standard Specification for Preformed, CellularPolystyrene Thermal Insulation.”Information on EPS is presented in the guide in theExpanded Polystyrene Roof Insulation Board section.Specific listing information included is as follows:1. Company name2. State3. Product name4. Density5. Surface treatments6. Available as tapered material7. Year first used in commercial roofing system8. Estimated percentage of thermal valueretention9. UL “P” design numbers, building code agencyapproved design numbers10. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding EPS are encouraged to refer toThe NRCA <strong>Roofing</strong> and Waterproofing Manual, FourthEdition.Extruded PolystyreneExtruded polystyrene (XPS) insulation board is formedwith a polystyrene polymer. The blended polystyrenepolymer is heated, put through an extrusion processand then exposed to normal atmospheric conditions sothe material will expand. Closed cells are formed withinthe material during this expansion process. Theextrusion process provides smooth, skin-like surfaceson the material.XPS is available in several different densities, severaldifferent board sizes and a number of boardthicknesses.The material standard that applies to XPS is AmericanSociety for Testing and Materials (ASTM) C578, titled“Standard Specification for Preformed, CellularPolystyrene Thermal Insulation.”Information on XPS is presented in the guide in theExtruded Polystyrene Roof Insulation Board section.Specific listing information included is as follows:1. Company name2. State3. Product name4. Density5. Surface treatment6. Available as tapered material7. Year first used in commercial roofing systems8. Meets applicable standards9. Compressive strength10. Water absorption11. Flexural strength12. Common available sizes13. Common available thicknesses14. Estimated percentage of thermal valueretention15. UL “P” design numbers; building code agencyapproved design numbers16. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding XPS are encouraged to refer toThe NRCA <strong>Roofing</strong> and Waterproofing Manual, FourthEdition.325

Cellular GlassCellular glass insulation board is manufactured as arigid insulating material composed of heat-fused,closed glass cells.Cellular glass insulation board is available in severaldifferent board sizes and a number of boardthicknesses. It is also available in tapered thicknessboards.The material standard that applies to cellular glassinsulation board is American Society for Testing andMaterials (ASTM) C552, titled “Standard Specificationfor Cellular Glass Thermal Insulation.”Information on cellular glass insulation board ispresented in the guide in the Cellular Glass RoofInsulation Board section. Specific listing informationincluded is as follows:1. Company name2. State3. Product name4. Surface treatment5. Available as tapered material6. Year first used in commercial roofing system7. Meets applicable standards8. Compressive strength9. Water absorption10. Flexural strength11. Common available sizes12. Common available thicknesses13. Estimated percentage of thermal valueretention14. UL “P” design numbers; building code agencyapproved design numbers15. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding cellular glass insulation areencouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth Edition.Wood FiberboardWood fiberboard roof insulation is a rigid insulatingmaterial manufactured from wood or cane fibers andvarious binders.Wood fiberboard insulation board is available in severaldensities, several different board sizes and a number ofboard thicknesses.The material standard that applies to the woodfiberboard roof insulation is American Society forTesting and Materials (ASTM) C208, titled “StandardSpecification for Cellulosic Fiber Insulating Board.”Information on wood fiberboard insulation board ispresented in the guide in the Wood Fiberboard RoofInsulation Board section. Specific listing informationincluded is as follows:1. Company name2. State3. Product name4. Surface treatment5. Available as tapered material6. Year first used in commercial roofing system7. Meets applicable standards8. Common available sizes9. Common available thicknesses10. Estimated percentage of thermal valueretention11. UL “P” design numbers; building code agencyapproved design numbers12. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding wood fiberboard insulation areencouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth Edition.PerlitePerlite board roof insulation is a rigid insulating materialmanufactured from expanded volcanic materialscombined with organic fibers and binders. The topsurface of perlite roof insulation generally is treatedwith an asphalt emulsion to minimize bitumenabsorption.Perlite insulation board is available in several differentboard sizes and a number of board thicknesses. It isalso available in tapered thickness boards.The material standard that applies to the perliteinsulation board is American Society for Testing andMaterials (ASTM) C728, titled “Standard Specificationfor Perlite Thermal Insulation Board.”Information on perlite insulation board is presented inthe guide in the Perlite Roof Insulation Board section.Specific listing information included is as follows:1. Company name2. State3. Product name4. Surface treatment5. Available as tapered material6. Year first used in commercial roofing system7. Meets applicable standards8. Compressive strength9. Water absorption10. Flexural strength11. Common available sizes12. Common available thicknesses13. Estimated percentage of thermal valueretention326

14. UL “P” design numbers; building code agencyapproved design numbers15. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding perlite insulation board areencouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth Edition.PolyisocyanuratePolyisocyanurate foam roof insulation board ismanufactured as a closed cell rigid foam insulation.For rigid roof insulation, the polyisocyanurate foammaterial is typically sandwiched between asphaltsaturatedorganic or inorganic felt facers or inorganicglass fiber mat facers.Polyisocyanurate roof insulation is available in severaldifferent board sizes and a number of boardthicknesses. It is also available in tapered thicknessboards.The material standard that applies to polyisocyanurateinsulation board is American Society for Testing andMaterials (ASTM) C1289, titled “Standard Specificationfor Faced Rigid Polyisocyanurate Thermal InsulationBoard.”Information on polyisocyanurate insulation board ispresented in the guide in the Polyisocyanurate RoofInsulation Board section in two parts: part 1: <strong>General</strong>Information and Part 2: Test Results.Specific listing information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. State3. Product name4. Homogeneous or composite5. Density6. Composite components7. Surface treatment8. Available as tapered material9. Year first used in commercial roofing system10. Common available sizes11. UL “P” design numbers; building code agencyapproved design numbers12. Limitations and/or restrictionsare encouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth EditionCompositeComposite insulation boards consist of multiple layersof insulation and/or a variety of other board materials,such as perlite, polyisocyanurate, fiberboard, plywood,or gypsum board that form a unified, bonded multi-layercomponent. Top and/or bottom surfaces may or maynot be coated or impregnated with facer materials, suchas foils, organic felts, glass fibers, and kraft paper.Composite insulation board is available in severaldifferent board sizes and a number of boardthicknesses.Information on composite insulation board is presentedin the guide in the Composite Roof Insulation Boardsection. Specific listing information included is asfollows:1. Company name2. State3. Product name4. Composite components5. Surface treatment6. Available as tapered material7. Year first used in commercial roofing system8. Common available sizes9. Common available thicknesses10. Estimated percentage of thermal valueretention11. UL “P” design; building code agency approveddesign numbers12. Limitations and/or restrictionsUsers of the guide who are interested in additionalinformation regarding composite insulation board areencouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth EditionIn Part 2: Test Results, specific information included isas follows:1. Company name2. Product name3. Product type, physical properties, minimumthermal resistanceUsers of the guide who are interested in additionalinformation regarding polyisocyanurate insulation board327

<strong>Index</strong> to Rigid Board InsulationCOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENECOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENEA F M R-CONTROL BUILDING SYSTEMS 332 334 356 CELOTEX CORP. 342 345 347P. O. Box 246 4010 Boy Scout Blvd. 351Excelsior, MN 55331 Tampa, FL 33607800/255-0176 813/873-1700FAX:E-mail: afm@r-control.comWeb Site: www.r-cotrol.comALLIEDSIGNAL INC. COMMERCIAL 340 342 344 346 DOW CHEMICAL COMPANY, THE 335 358FAX:E-mail:Web:ROOFING SYSTEMS 351 Fabricated Products Business Center2000 Regency Parkway Suite 255 1605 Joseph Drive, Larkin 200 BuildingCary, NC 27511-8507 Midland, MI 48674919/461-0670 (NC) 800/221-6490 517/638-5225FAX 919/461-4720FAX:E-mail: alliedroof@alliedsignal.comE-mail:Web: www.alliedroof.comWeb:ARVRON INC. 332 FIRESTONE BUILDING PRODUCTS, INC. 3474720 Clay S.W. 525 Congressional Blvd. 352Grand Rapids, MI 49548 Carmel, IN 46032-5607616/530-1888 800/428-4442FAX:FAX:E-mail:E-mail:Web:Web:ATLAS ROOFING CORPORATION 346 FOAM PLASICS OF NEW ENGLAND 3321775 The Exchange, Suite 160 350 Route 69Atlanta, GA 30339 Prospect, CT 06712770/933-4478 203/758-6651 (CT) 800/237-3763FAX 770/952-3170 FAX 203/758-3162E-mail:E-mail: foamplastic@sprintmail.comWeb: www.atlasroofing.comWeb:BENCHMARK FOAM INC. 332 356 GAF MATERIALS CORP. 332 356 343 345 3473200 9th Ave., S.E. 1361 Alps Road 353Watertown, SD 57201-9102 Wayne, NJ 07470800/658-3444 973/628-3000FAX 605/886-8099 FAX 973/628-3356E-mail: getfoam@benchmarkfoam.comE-mail:Web: www.benchmarkfoam.comWeb:BIG SKY INULATIONS INC. 332 357 GEORGIA PACIFIC CORP. 34315 Arden Drive 133 Peachtree St. NEP.O. Box 838 P.O. Box 105624Belgrade, MT 59714 Atlanta, GA 30348-5624406/388-4146 404/652-5547 800/879-7781FAX: FAX 404/230-7845E-mail:E-mail:Web:Web:BMCA INSULATION PRODUCTS INC. 344 HUEBERT FIBERBOARD CO. 343300 N. Haven Avenue 1545 E Morgan Street, Box 167Ontario, CA 91761 Boonville, MO 65233800/858-8868 660/882-2704FAX 909/390-8764 FAX 660/882-2704E-mail:E-mail:Web:CARLISLE SYNTEC INCORPORATED 332 334 342 346 INSUL-BOARD, INC. 333P.O. Box 7000 351 2120 Colonial AvenueCarlisle, PA 17013 P.O. Box 8103717/245-7000 Erie, PA 16505FAX: 814/833-7400E-mail: FAX 814/838-4774Web:E-mail: insul@erie.netCARPENTER INSULATION CO. 332 357 INSULATED BUILDING SYSTEMS, INC. 333 358P. O. Box 27205 9912 Georgetown Pike, Suite D2Richmond, VA 23261 Great Falls, VA 22066800/288-3836 703/757-0118FAX: FAX 703/757-0119E-mail:E-mail: aol.com/insblgsys/ibs.htmWeb:Web:328

<strong>Index</strong> to Rigid Board InsulationCOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENECOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENEINSULATION CORP. OF AMERICA 333 PLYMOUTH FOAM INCORPORATED 3332571 Mitchell Avenue 1800 Sunset DriveAllentown, PA 18103 Plymouth, WI 53073610/791-4200 920/893-0535FAX: FAX 920/892-4986E-mail:Web:Web: www.plymouthfoam.comJOHNS MANVILLE INTERNATIONAL INC. 340 345 347 POLY FOAM INC. 333<strong>Roofing</strong> Systems Group 354 116 Pine Street SouthP.O. Box 5108 Lester Prairie, MN 55354-0218Denver, CO 80217 320/395-2551303/978-2000 FAXj:FAX 303/978-3904E-mail:E-mail:Web:Web:KNAUF USA POLYSTYRENE 333 POLYFOAM PACKERS CORP. 3582725 Henkle Drive CONSTRUCTION PRODUCTS DIV.Lebanon, OH 450363751 Sunset Ave.513/922-6823 Waukegan, IL 60067FAX 513/932-3506 800/800-0359 847/263-0200FAX 847/263-0350E-mail:KOPPERS INDUSTRIES INC. 343 345 348 R-MAX INC. 348Commercial <strong>Roofing</strong> Dept. 355 13524 Welch Road 358436 Seventh Avenue Dallas, TX 75244Pittsburgh, PA 15219-1800 972/387-4500800/558-2706 FAX: 972/387-4673FAX: 412/227-2002E-mail:E-mail:Web: www.rminc.comWeb: www.koppers.comLUCAS SALES CO., INC. 336 345 T-CLEAR CORPORATION 35810623 Baur Blvd. P. O. Box 416St. Louis, MO 63132 Hamilton, OH 45012314/993-9610 800/ 544-7398 or 513/870-9243FAX 314/993-4836 FAX 513/870-9606E-mail:E-mail: telesouth1.comWeb:Web:OWENS CORNING 357 TEMPLE 343275 Southwest Avenue P.O. Drawer NTallmadge, OH 44278 Diboll, TX 75941330/633-6735 409/829-1254800/231-6060FAX:FAX:E-mail:E-mail: gkeeling@temple.comWeb:Web: www.temple.comOWENS CORNING FALCON FOAM CORP. 333 TENNECO BUILDING PRODUCTS 3398240 Byron Center Road 2907 Log Cabin DriveByron Center, MI 49315 Smyma, GA 30080-7013616/878-1588 800/241-4402FAX 616/878-0874 FAX 404/350-1489E-mail:E-mail:Web:Web:PACEMAKER PLASTICS CO., INC. 333 THERMCO INDUSTRIES INC. 333126 New Pace Road., P.O. Box 279 809 East 15th St., P.O. Box 49Newcomerstown, OH 43832 Washington, IA 52353800/446-2188 800/247-7831 319/653-6216FAX 740/498-4184FAX:E-mail: pacemaker@tusco.netE-mail:Web: www.pacemakerplastics.comWeb:PITTSBURGH CORNING CORP. 341 U.S. INTEC, INC. 349800 Presque Isle Drive 1361 Alps Road 355Pittsburg, PA 15239 Wayne,NJ 07470800/359-8433 800/624-6832FAX: 724/327-5890 FAX: 973/628-4167E-mail:E-mail:Web: www.foamglas/insulation.comWeb: www.usintec.com329

<strong>Index</strong> to Rigid Board InsulationCOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENECOMPOSITEPOLYISOCYANURATEPERLITEWOOD FIBERBOARDCELLULAR GLASSGLASS FIBEREXTRUDED POLYSTYRENEEXPANDED POLYSTYRENEWOOLLEY & COMPANY 3336865 Mimms DriveDoraville, GA 30340770/448-8473FAX 770/448-3061330

THIS PAGE LEFT BLANK INTENTIONALLY

Expanded Polystyrene Roof Insulation Board(Homogeneous Only)1. COMPANY NAME AFM R-CONTROL AFM R-CONTROL AFM R-CONTROL ARVRON BENCHMARKBUILDING BUILDING BUILDING INC. FOAM INC.SYSTEMS SYSTEMS SYSTEMS2. STATE MN MN MN MI SD3. PRODUCT NAME AFM AFM CONTOUR AFM PERFORM STEER-O-CELL PERMA-FOAMPERFORM TAPER TILE PROTECT4. DENSITIES PER ASTM C 303 OR OTHER1.00 lbs/ft 2 X X X X X1.25 lbs/ft 2 X X X X X1.50 lbs/ft 2 X X X X X2.00 lbs/ft 2 X X X X X5. SURFACE TREATMENTS<strong>Roofing</strong> Felt X XFoil Faced Kraft X X XTreated kraftKraftXOther X X X X6. AVAILABLE AS TAPERED MATERIALWith Facer YES YES YESWithout Facer YES YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1966 1966 1994 1978 19778. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(Assuming a continuous mean temperature @1 year 100 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100 100@10 years 100 100 100 100 1009. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY APPROVED SEE APPENDIX SEE APPENDIX UL 1256 ASTM C 578-87ADESIGN NUMBERS; ICBO, BOCA, SBCCI (OTHERS) CO. NO. 411 RADCO 1165CO. NO. 412P225, P701P801, P803SEE APPENDIXP814, P815P817UL 1256FM 445010. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX11. SEE APPENDIX IF CHECKED X X X1. COMPANY NAME BIG SKY CARLISLE CARPENTER FOAM GAFINSULATIONS SYNTEC INSULATION PLASTICS OF MATERIALSINC. INC. COMPANY NEW ENGLAND CORP.2. STATE MT PA VA CT NJ3. PRODUCT NAME SNOFOAM SURE-SEAL CARPENTER DURAFOAM EVERGARD EPSEPS EPS STYRODECK4. DENSITIES PER ASTM C-303 OR OTHER1.00 lbs/ft 2 X X X X X1.25 lbs/ft 2 X X X X X1.50 lbs/ft 2 X X X X X2.00 lbs/ft 2 X X X X X5. SURFACE TREATMENTS<strong>Roofing</strong> Felt X XFoil Faced Kraft X X XTreated kraft X XKraft X X XOther X X X6. AVAILABLE AS TAPERED MATERIALWith Facer YES NO YES YESWithout Facer YES YES YES YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1977 1981 1977 1976 1,9858. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(Assuming a continuous mean temperature @1 year 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100@10 years 100 100 100 100 >909. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY APPROVED SEE APPENDIX BOCA 93-39 ASTM C 578-91 P225,P231 CONTACTDESIGN NUMBERS; ICBO, BOCA, SBCCI (OTHERS) ICBO 3826 P234,P703 GAFSBCCI 9457 ICBO 3504DADE COUNTY: BOCA 79-0697-1110 HH-I-524-CNEW YORK CITYASTM C578-87a10. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX11. SEE APPENDIX IF CHECKED X X XFor thermal conductance (C) and thermal resistance (R), see the expandedpolystyrene material data sheetNA=not applicable332

Expanded Polystyrene Roof Insulation Board(Homogeneous Only)INSUL-BOARD INSULATED INSULATED INSULATION KNAUF USA OWENS CORNING OWENS CORNING OWENS CORNING PACEMAKERINC. BUILDING BUILDING CORPORATION POLYSTYRENE FALCON FOAM FALCON FOAM FALCON FOAM PLASTICSSYSTEMS SYSTEMS OF AMERICA CORP. CORP. CORP. CO., INC.PA VA VA PA OH MI MI CA OHINSUL-BOARD AFM AFM CONTOUR ICA LITE ROOF EPS FALCON FOAM FALCON FOAM FALCON FOAM CHEMFOAMPERFORM TAPER TILE INSULATION (PERFORM)X X X X X X X X XX X X X X X X X XX X X X X X X X XX X X X X X X X XXXX X X X XX X X X XYES YES NO NO YES YES YESYES YES YES YES YES YES YES1978 1966 1966 1979 1970 1980 1980 1980 1975100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100P225, P701 SEE APPENDIX SEE APPENDIX ASTM C 578-92 UL R8997 ICBO 4059, 3401 UL R6705 UL 418415 SEE APPENDIXP801, P803 NY-13B86,P211 FM 2W1A7.AM 3504, 3530 ICBO 4059 ICBO 4059P814, P815 P701,P801 ASTM C 578-91 FM J10T0A6 P211, P225P817 P803, P814 P211, P225 P 701, P801UL-13450 P815, P817 P701, P801 P803, P817UL CO. NO. 458 BOCA 876-5 P803, P814 P815, P817ICBO 1717 P815, P817 UL 458PA1349B UL 458UL 9702XPLYMOUTH POLYFOAM POLYFOAM THERMCO WOOLLEYFOAM INC. PACKERS INDUSTRIES & CO.INC. CORP. IINC.WI MN IL IA GAPOLYTEC DRI-LITE THERMOSAFE THERMOC ACRASPANEPSX X X X XX X X X XX X X X XX X X X XX X X XX X X XXX X XX X XYES YES YESYES YES YES YES YES1978 1960 1990 1963 1976100 100 100 100 100100 100 100 100 100100 100 100 100 100ICBO 4169 UL R14213, ASTM C-578-92P225,P701 CONSTR. NO 458 UL 5287P801,P803 FM OV8A0.AC,P814,P815 FM OV8A1.ACP817 FM OV8A2.ACCABO 236,238, 384, 479WISC. APPROVALNO. 960041-ISEE APPENDIX SEE APPENDIXXX333

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)1. COMPANY NAME AFM R-CONTROL AFM R-CONTROL CARLISLE CARLISLE CARLISLEBUILDING BUILDING SYNTEC SYNTEC SYNTECSYSTEMS SYSTEMS INC. INC. INC.2. STATE MN MN PA PA PA3. PRODUCT NAME AFM CONTOUR AFM CONTOUR FOAMULAR FOAMULAR FOAMULARTAPER TILE-X TAPER TILE-X THERMAPINK 18 THERMAPINK 25 THERMAPINK 404. DENSITY PER ASTM C 303 OR OTHER (lbs/ft 3 ) 1.8 1.4 1.3 MIN 1.6 MIN 1.8 MIN5. SURFACE TREATMENTTop Surface CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUSSKIN 1 SIDE SKIN 1 SIDE EXTRUDED EXTRUDED EXTRUDEDTAPER ONE SIDE TAPER ONE SIDE SKIN SKIN SKINBottom Surface CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUSSKIN 1 SIDE SKIN 1 SIDE EXTRUDED EXTRUDED EXTRUDEDTAPER ONE SIDE TAPER ONE SIDE SKIN SKIN SKIN6. AVAILABLE AS TAPERED MATERIAL YES YES NO YES NO7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1980 1980 1996 1996 19968. MEETS APPLICABLE STANDARDS ASTM C 578–95a ASTM C 578–95a ASTM C 578–92 ASTM C 578–92 ASTM C 578–92TYPE IV TYPE X TYPE X TYPE IV TYPE VIHH1524C9. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 25 MIN 15 18 MIN 25 MIN 40 MIN10. WATER ABSORPTION PER ASTM C 272 OR OTHER (% by volume) 0.15 0.20

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)DOW DOW DOW DOW DOW DOW DOW DOW DOWCHEMCIAL CHEMICAL CHEMICAL CHEMICAL CHEMICAL CHEMICAL CHEMICAL CHEMICAL CHEMICALCO., THE CO., THE CO., THE CO., THE CO., THE CO., THE CO., THE CO., THE CO., THEMI MI MI MI CANADA CANADA MI CANADA MISTYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM SYTROFOAMROOFMATE BOARD PLAZAMATE DECKMATE DECKMATE PLUS DECKMATE DECKMATE 200 RECOVERMATE ROOFMATE HIGHLOAD 1001.8 MIN 2.2 MIN 1.35 MIN 1.6 MIN 2.0 3CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUSCLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELLEXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKINCONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUSCLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELLEXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKINYES YES YES YES YES YES NO YES YES1971 1981 1995 1995 1990 1990 1994 1971 1981ASTM C 578–92 ASTM C 578–92 ASTM C 578–92 ASTM C 578-92 CAN/CGSB 51-20-M87 CAN/CGSB 51-20- CAN/CGSB 51-20- ASTM C 578-92TYPE VI TYPE VII TYPE X TYPE IV M87 M87 M87 TYPE VTYPE 2 TYPE 340 MIN 60 MIN 18 MIN 25 MIN 16 MIN 20 MIN 15 MIN 35 MIN 100 MIN95 >95 95 95 94 >96ICBO 2257 ICBO 2257 ICBO 2257 ICBO 2257 ICBO 2257 ICBO 2257BOCA 95-33 BOCA 95-33 BOCA 95-33 BOCA 95-33 BOCA 95-33 BOCA 95-33SBCCI 9576B SBCCI 9576B SBCCI 9576B SBCCI 9576B SBCCI 9576B SBCCI 9576BSEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXSEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X X335

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)1. COMPANY NAME GAF GAF LUCAS LUCAS LUCASMATERIALS MATERIALS SALES SALES SALESCORP. CORP. CO., INC. CO., INC. CO., INC.2. STATE NJ NJ MO MO MO3. PRODUCT NAME EVERGUARD EVERGUARD XPS LUCAS LITE LUCAS LITE LUCAS LITEXPS FAN-FOLD TAPERED TAPERED TAPERED4. DENSITY PER ASTM C 303 OR OTHER (lbs/ft 3 ) 2 3.6 1.35 MIN 1.6 MIN 1.8 MIN5. SURFACE TREATMENTTop Surface CONTINUOUS PLASTIC CONTINUOUS CONTINUOUS CONTINUOUSCLOSED-CELL CAP SHEET EXTRUDED EXTRUDED EXTRUDEDEXTRUDED SKIN SKIN SKIN SKINBottom Surface CONTINUOUS PLASTIC SAW CUT SAW CUT SAW CUTCLOSED-CELL CAP SHEET SURFACE SURFACE SURFACEEXTRUDED SKIN6. AVAILABLE AS TAPERED MATERIAL YES NO YES YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1989 1987 1983 1983 19848. MEETS APPLICABLE STANDARDS ASTM C 578-92 ASTM C 578-87a ASTM C 578-87a ASTM C 578-87aTYPE IV TYPE X TYPE IV TYPE VITYPE VI9. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 1-40 AVE 20 AVE. 15 MIN 25 MIN 40 MIN10. WATER ABSORPTION PER ASTM C 272 OR OTHER (% by volume) 0.1 0.4 95@ 10 years >90 >90 >90 >90 >9015. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY CONTACT GAF CONTACT GAFAPPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI(OTHERS)16. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX17. SEE APPENDIX IF CHECKED X X XNA=not applicable336

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)LUCAS OWENS OWENS OWENS OWENS OWENS OWENS OWENS OWENSSALES CORNING CORNING CORNING CORNING CORNING CORNING CORNING CORNINGCO., INC.MO OH OH OH OH OH OH OH OHLUCAS LITE FAOMULAR FAOMULAR FAOMULAR FAOMULAR FAOMULAR FAOMULAR FAOMULAR FAOMULARTAPERED 150 250 400 404 404RB 600 604 604RB2.2 MIN 1.30 MIN 1.6 MIN 1.8 MIN 1.8 MIN 1.8 MIN 2.2 MIN 2.2 MIN 2.2 MINCONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CHANNELED CONTINUOUS CONTINUOUS CHANNELEDEXTRUDED EXTRUDED EXTRUDED EXTRUDED EXTRUDED EXTRUDED EXTRUDEDSKIN SKIN SKIN SKIN SKIN SKIN SKINSAW CUT CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUS CONTINUOUSSURFACE CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELL CLOSED-CELLEXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKINYES NO NO NO NO NO NO NO NO1984 1983 1983 1984 1984 1991 1984 1984 1991ASTM C 578-87a ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578TYPE VII TYPE X TYPE IV TYPE VI TYPE VI TYPE VI TYPE VII TYPE VII TYPE VII60 MIN 15 MIN 25 MIN 40 MIN 40 MIN 40 MIN 60 MIN 60 MIN 60 MIN

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)1. COMPANY NAME OWENS OWENS OWENS OWENS OWENSCORNING CORNING CORNING CORNING CORNING2. STATE OH OH OH OH OH3. PRODUCT NAME FAOMULAR DURAPINK DURAPINK DURAPINK THERMAPINK1000 FA PLUS 184. DENSITY PER ASTM C 303 OR OTHER (lbs/ft 3 ) 3.0 MIN 1.6 MIN 1.6 MIN 1.5 MIN 1.3 MIN5. SURFACE TREATMENTTop Surface CONTINUOUS CONTINUOUS CONTINUOUS LAMINATED CONTINUOUSEXTRUDED EXTRUDED EXTRUDED GLASS FIBER EXTRUDEDSKIN SKIN SKIN SKINBottom Surface CONTINUOUS CONTINUOUS LAMINATED LAMINATED CONTINUOUSCLOSED-CELL CLOSED-CELL POLYETHYLENE POLYETHYLENE CLOSED-CELLEXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN6. AVAILABLE AS TAPERED MATERIAL NO NO NO NO NO7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1997 1993 1993 1994 19968. MEETS APPLICABLE STANDARDS ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578TYPE V TYPE IV TYPE X9. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 100 MIN 25 MIN 25 MIN 18 MIN 18 MIN10. WATER ABSORPTION PER ASTM C 272 OR OTHER (% by volume)

Extruded Polystyrene Roof Insulation Board(Homogeneous Only)OWENS OWENS OWENS TENNECO TENNECO TENNECOCORNING CORNING CORNING BUILDING BUILDING BUILDINGPRODUCTS PRODUCTS PRODUCTSOH OH OH GA GA GATHERMAPINK THERMAPINK THERMAPINK AMOCOR AMOCOR PLYGOOD AMOFOAM25 40 60 PB-6 PG38 & PB 391.6 MIN 1.8 MIN 2.2 MIN 3.6 3.6 2.0CONTINUOUS CONTINUOUS CONTINUOUS EXTRUDED CORE, EXTRUDED CORE, CONTINUOUSEXTRUDED EXTRUDED EXTRUDED PLASTIC PLASTIC EXTRUDEDSKIN SKIN SKIN CAPSHEETS CAPSHEETS SKINCONTINUOUS CONTINUOUS CONTINUOUS EXTRUDED CORE, EXTRUDED CORE, CONTINUOUSCLOSED-CELL CLOSED-CELL CLOSED-CELL PLASTIC PLASTIC EXTRUDEDEXTRUDED SKIN EXTRUDED SKIN EXTRUDED SKIN CAPSHEETS CAPSHEETS SKINYES YES YES NO NO YES1996 1996 1996 1987 1988 1989ASTM C 578 ASTM C 578 ASTM C 578 ASTM C 578–92TYPE IV TYPE VI TYPE VII TYPE IVTYPE VI25 MIN 40 MIN 60 MIN 25 AVG. 25 AVG. 1"-40 AVG.< 0.10 < 0.05 < 0.05 0.40 0.40 0.1070 MIN 115 MIN 140 MIN 50 MINX X X XX (2' X 8') X (4' x 50') X (4' x 9') X (2' x 8')1.0 1.5 1.5 0.38 0.38 1.00.185 0.123 0.123 0.1850.20 0.133 0.133 0.67 0.67 0.205.4 8.1 8.1 5.415.0 7.5 7.5 1.5 1.5 5.00.13 0.23 0.28 0.11 0.11 0.171.5 2.0 2.0 1.50.123 0.093 0.093 0.1230.133 0.10 0.10 0.1338.1 10.8 10.8 8.17.5 10.0 10.0 7.50.20 0.30 0.37 0.252.0 3.0 3.0 2.00.093 0.062 0.062 0.0930.10 0.067 0.067 0.1010.8 16.2 16.2 10.810.0 15.0 15.0 10.00.27 0.45 0.55 0.333.0 2.50.062 0.0740.067 0.0816.2 13.515.0 12.50.40 0.424.0 3.00.046 0.0620.05 0.06721.6 16.220.0 15.00.53 0.5095 95 9590 90 90 >90 >90 >90SEE APPENDIX SEE APPENDIX SEE APPENDIX UL A184 UL A184 UL A183ICBO 4280 ICBO 4280 ICBO 4280BOCA 95-44 BOCA 95-44 BOCA 90-78SBCCI 9855 SBCCI 9855 SBCCI 9855SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X X339

Glass Fiber/Mineral Fiber Roof Insulation Board1. COMPANY NAME ALLIED JOHNSSIGNALMANVILLEINTERNATIONAL2. STATE NC CO3. PRODUCT NAME ARMO-R GLAS FIBER GLASSINSULATION4. SURFACE TREATMENTTop Surface GLASS GLASSASPHALT & KRAFT ASPHALT & KRAFTCAP SHEET CAP SHEETROOFBottom Surface NONE NONE5. AVAILABLE AS TAPERED MATERIAL YES YES6. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1941 19417. MEETS APPLICABLE STANDARDS ASTM C 726 ASTM C 7268. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 12 129. WATER ABSORPTION PER ASTM C 272 OTHER (% by volume) 10 1010. FLEXURAL STRENGTH PER ASTM C 203 (psi)11. COMMON AVAILABLE SIZES2' x 4'3' x 4'4' x 4' X X4' x 8' X XOtherCOMMON AVAILABLE THICKNESSES(C-VALUE, R-VALUE, WEIGHT/ft 2 )12.1 Thickness (inches) 0.75 0.75Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.36 0.36Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 2.78 2.78Weight (lbs/ft 2 ) 0.98 0.7812.2 Thickness (inches) 0.938 0.938Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.27 0.27Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 3.70 3.70Weight (lbs/ft 2 ) 1.03 0.9412.3 Thickness (inches) 1.063 1.063Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.24 0.24Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 4.17 4.17Weight (lbs/ft 2 ) 1.06 0.9412.4 Thickness (inches) 1.313 1.63Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.19 0.15Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 5.26 6.67Weight (lbs/ft 2 ) 1.30 1.3212.5 Thickness (inches) 2.063 2.000Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.12 0.13Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 8.33 8.00Weight (lbs/ft 2 ) 1.70 1.5912.6 Thickness (inches) 2.437 2.25Thermal Conductance (C) @40 FThermal Conduyctance (C) @75 F 0.10 0.11Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 10.0 9.09Weight (lbs/ft 2 ) 1.95 1.7113. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100 100differential and constant moisture content) @ 5 years 100 100@ 10 years 100 10014. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIXAPPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI(OTHERS)15. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX16. SEE APPENDIX IF CHECKED XNA=not applicable340

Cellular Glass Roof Insulation Board1. COMPANY NAME PITTSBURGHCORNINGCORP.2. STATE PA3. PRODUCT NAME FOAMGLAS4. SURFACE TREATMENTTop SurfaceBottom SurfaceKRAFT SHEETKRAFT SHEET5. AVAILABLE AS TAPERED MATERIAL YES6. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 19437. MEETS APPLICABLE STANDARDS ASTM C 5528. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 1009. WATER ABSORPTION PER ASTM C 272 OR OTHER (psi) 0.210. FLEXURAL STRENGTH PER ASTM C 203 (psi) 8011. COMMON AVAILABLE SIZES2' x 4' X3' x 4'4' x 4'4' x 8'OtherCOMMON AVAILABLE THICKNESSES(C–VALUE, R–VALUE, WEIGHT/FT2)12.1 Thickness (inches) 1.5Thermal Conductance (C) @40 F 0.21Thermal Conductance (C) @75 F 0.22Thermal Resistance (R) @40 F 4.76Thermal Resistance (R) @75 F 4.55Weight (lbs/ft2) 0.9412.2 Thickness (inches) 2.0Thermal Conductance (C) @40 F 0.155Thermal Conductance (C) @75 F 0.165Thermal Resistance (R) @40 F 6.45Thermal Resistance (R) @75 F 6.06Weight (lbs/ft2) 1.2512.3 Thickness (inches) 3.0Thermal Conductance (C) @40 F 0.103Thermal Conductance (C) @75 F 0.11Thermal Resistance (R) @40 F 9.71Thermal Resistance (R) @75 F 9.09Weight (lbs/ft2) 1.8812.4 Thickness (inches) 4.0Thermal Conductance (C) @40 F 0.078Thermal Conductance (C) @75 F 0.083Thermal Resistance (R) @40 F 12.82Thermal Resistance (R) @75 F 12.05Weight (lbs/ft2) 2.512.5 Thickness (inches)Thermal Conductance (C) @40 FThermal Conductance (C) @75 FThermal Resistance (R) @40 FThermal Resistance (R) @75 FWeight (lbs/ft2)12.6 Thickness (inches)Thermal Conductance (C) @40 FThermal Conductance (C) @75 FThermal Resistance (R) @40 FThermal Resistance (R) @75 FWeight (lbs/ft2)13. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100differential and constant moisture content) @ 5 years 100@ 10 years 10014. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY P 227, P 259, P 508,APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI P 701, P 717, P 801(OTHERS)P 819, NYCMEA138 81-M, BSA131-44-SM, LAAPVL #RR2253415. LIMITATIONS AND/OR RESTRICTIONS16. SEE APPENDIX IF CHECKEDNA=not applicable341

Wood Fiberboard Roof Insulation Board(Homogeneous Only)1. COMPANY NAME ALLIED ALLIED CARLISLE CELOTEX CELOTEXSIGNAL SIGNAL SYNTEC CORP. CORP.INC. INC. INC.2. STATE NC NC PA FL FL3. PRODUCT NAME ARMOR BOARD ARMOR BOARD HP RECOVERBY REGULAR HIGH-DENSITYREGULAR HIGH DENSITY BOARD FIBERBOARD ROOF FIBERBOARD ROOFINSULATION INSULATION4. SURFACE TREATMENTTop Surface SURFACE SURFACE ASPHALT SURFACE SURFACETREATMENT TREATMENT EMULSION TREATMENT TREATMENTBottom Surface NONE NONE NONE NONE NONE5. AVAILABLE AS TAPERED MATERIAL NO NO NO YES YES6. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1928 1928 1981 1928 19287. MEETS APPLICABLE STANDARDS LLLI535B LLLI535B ASTM C 208 LLLI535B LLLI535BASTM C 208 ASTM C 208 TYPE II, GRADE 2 ASTM C 208, ASTM C 208,TYPE II, GRADE 1 TYPE II, GRADE 18. COMMON AVAILABLE SIZES2' x 4' X X3' x 4'4' x 4' X X X X X4' x 8' X X X X XOtherCOMMON AVAILABLE THICKNESSESWATER ABSORPTION, TRANSVERSE STRENGTH, C-VALUES,R-VALUES, PERCENT BY VOLUME9.1 Thickness (inches) 0.5 0.5 0.5 0.5 0.5Water Absorption Per ASTM C-209 or Other (% by volume)7 MAXTransverse Strength ASTM C-209 or Other (psi) 12Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.72 0.77 0.80 0.72 0.77Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 1.39 1.3 1.25 1.39 1.3Weight (lbs/ft 2 ) 0.70 0.80 0.65 0.70 0.809.2 Thickness (inches) 1.0 1.0 1.0 1.0 1.0Water Absorption Per ASTM C-209 or Other (% by volume) 7 MAXTransverse Strength ASTM C-209 or Other (psi) 14Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.36 0.40 0.4 0.36 0.40Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 2.78 2.5 2.5 2.78 2.5Weight (lbs/ft 2 ) 1.4 1.6 1.4 1.4 1.69.3 Thickness (inches) 1.5 1.5 1.5 1.5Water Absorption Per ASTM C-209 or Other (% by volume)Transverse Strength ASTM C-209 or Other (psi)Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.24 0.26 0.24 0.26Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 4.17 3.8 4.17 3.8Weight (lbs/ft 2 ) 2.1 2.4 2.1 2.49.4 Thickness (inches) 2.0 2.0Water Absorption Per ASTM C-209 or Other (% by volume)Transverse Strength ASTM C-209 or Other (psi)Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.18 0.18Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 5.56 5.56Weight (lbs/ft 2 ) 2.8 2.89.5 Thickness (inches)Water Absorption Per ASTM C-209 or Other (% by volume)Transverse Strength ASTM C-209 or Other (psi)Thermal Conductance (C) @40 FThermal Conductance (C) @75 FThermal Resistance (R) @40 FThermal Resistance (R) @75 FWeight (lbs/ft 2 )9.6 Thickness (inches)Water Absorption Per ASTM C-209 or Other (% by volume)Transverse Strength ASTM C-209 or Other (psi)Thermal Conductance (C) @40 FThermal Conductance (C) @75 FThermal Resistance (R) @40 FThermal Resistance (R) @75 FWeight (lbs/ft 2 )10 ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100@ 10 years 100 100 100 10011. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY BOCA 93-39, ICBO:APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI 3826; SBCCI: 9457(OTHERS) DADE CTY 97-111012. LIMITATIONS AND/OR RESTRICTIONS13. SEE APPENDIX IF CHECKEDNA=not applicable342

Wood Fiberboard Roof Insulation Board(Homogeneous Only)GAF GAF GEORGIA GEORGIA HUEBERT HUEBERT KOPPERS KOPPERS TEMPLEMATERIALS MATERIALS PACIFIC PACIFIC FIBERBOARD FIBERBOARD INDUSTRIES INDUSTRIESCORP. CORP. CORP. CORP. CO. CO. INC. INC.NJ NJ VA VA MO MO PA PA TXGAFTEMP GAFTEMP HIGH DENSITY REGULAR DENSITY HFB H.D. COATED REGULAR DENSE FIBERBASE H.D.REGULAR HIGH DENSITY FIBERBOARD FIBERBOARDFIBERBOARD FIBERBOARDSURFACE SURFACE ASPHALT ASPHALT NONE ASPHALT ASPHALT ASPHALT ASPHALT COATED,TREATMENT TREATMENT EMULSION EMULSION EMULSION EMULSION EMULSION OR UNCOATEDNONE NONE NONE NONE NONE NONE NONE NONE ASPHALT COATED,OR UNCOATEDNO YES NO NO NO NO NO NO NO1928 1928 1986 1986 1961 1990 1986 1986 1982LLLI535B LLLI535B ASTM C208-94, GRADE 2 ASTM C208-94, GRADE 1 ASTM C 208 ASTM C 208 LLLI535B LLLI535B ASTM C 208ASTM C 208, ASTM C 208, ANSI/AHA 194.1-1985 ANSI/AHA 194.1-1985 LLLI535B,ClsC LLLI535B ASTM C 208-94 ASTM C 208-94 ANSI/AHA A 194.1ASTM C 209 ASTM C 209 TYPE IV, CLASS 1 TYPE VI PS57-73 GRADE 1 GRADE 2X X X X X XX X X X X X X XX X X X X X X X X0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.57 MAX 10 MAX 5 to 10 7 MAX 10 MAX 7 MAX 7 MAX14 7 7 MIN 12 MIN 7 14 140.72 0.77 0.78 0.78 0.72 0.72 0.78 0.78 0.7581.39 1.3 1.25 1.25 1.39 1.39 1.25 1.28 1.320.70 0.80 0.67 0.65 0.75 0.81 0.65 0.67 0.751.0 1.0 1.0 0.75 0.75 0.75 0.7817 MAX 5 to 10 7 MAX 7 MAX 7 MAX30 12 MIN 18 MIN 24 250.36 0.40 0.36 0.48 0.48 0.48 0.501.1 1.12.78 2.5 0.28 2.08 2.08 2.10 1.951.4 1.6 1.13 1.1 1.1 0.875 1.351.5 1.5 0.75 1.0 1.0 1.07 MAX 5 to 10 7 MAX 7 MAX24 14 MIN 24 MIN 300.24 0.26 0.48 0.36 0.36 0.364.17 3.8 2.1 2.78 2.78 2.782.1 2.4 0.875 1.5 1.6 1.132.0 2.0 1.50.240.18 0.16 0.242.35.56 5.0 4.172.8 3.2 2.32.00.195.263.0100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100UL P517SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X X343

Perlite Roof Insulation Board(Homogeneous Only)1. COMPANY NAME ALLIED ALLIED BMCA BMCASIGNAL SIGNAL INSULATION INSULATIONINC. INC. PRODUCTS INC. PRODUCTS INC.2. STATE NC NC CA CA3. PRODUCT NAME ARMOR LITE ARMOR LITE 1/2" PERMALITE 1/2" RECOVERRECOVERBOARD ROOF INSULATION BOARD4. SURFACE TREATMENTTop Surface COATED COATED COATED COATEDBottom Surface NONE NONE NONE NONE5. AVAILABLE AS TAPERED MATERIAL YES NO YES NO6. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1962 1985 1962 19857. MEETS APPLICABLE STANDARDS HHI529b ASTMC 728-91 HHI529b ASTM C 728–91ASTM C 728–91 ASTM C 728–918. COMPRESSIVE STRENGTH PER ASTM D 1621 OR OTHER (psi) 35 NOM. 40 NOM. 35 NOM. 40 NOM.9. WATER ABSORPTION PER ASTM C 272 OR OTHER (% by volume) 1.2 NOM. 3.5 MAX. 1.5 MAX. 3.5 MAX.10. FLEXURAL STRENGTH PER ASTM C 203 (psi) 60 NOM. 60 NOM. 100 NOM.11. COMMON AVAILABLE SIZES2' x 4' X X X X3' x 4'4' x 4' X X X X4' x 8' XOtherXCOMMON AVAILABLE THICKNESSES(C–VALUE, R–VALUE, WEIGHT/FT 2 )12.1 Thickness (inches) 0.75 0.50 0.75 0.50Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.48 0.72 0.48 0.72Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 2.08 1.39 2.08 1.32Weight (lbs/ft 2 ) 0.60 0.55 0.6 0.5012.2 Thickness (inches) 1.0 1.0Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.36 0.36Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 2.78 2.78Weight (lbs/ft 2 ) 0.8 0.812.3 Thickness (inches) 1.5 1.5Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.24 0.24Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 4.17 4.17Weight (lbs/ft 2 ) 1.2 1.212.4 Thickness (inches) 2.0 2.0Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.18 0.18Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 5.56 5.56Weight (lbs/ft 2 ) 1.60 1.612.5 Thickness (inches) 2.5 2.5Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.15 0.15Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 6.67 6.67Weight (lbs/ft 2 ) 2.0 2.012.6 Thickness (inches) 3.0 3.0Thermal Conductance (C) @40 FThermal Conductance (C) @75 F 0.12 0.12Thermal Resistance (R) @40 FThermal Resistance (R) @75 F 8.33 8.33Weight (lbs/ft 2 ) 2.4 2.413. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100@ 10 years 100 100 100 10014. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCYAPPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI(OTHERS)15. LIMITATIONS AND/OR RESTRICTIONS16. SEE APPENDIX IF CHECKEDNA=not applicable344

Perlite Roof Insulation Board(Homogeneous Only)CELOTEX GAF GAF JOHNS JOHNS JOHNS KOPPERS KOPPERS LUCAS SALESCORP. MATERIALS MATERIALS MANVILLE MANVILLE MANVILLE INDUSTRIES INDUSTRIES COMPANYCORP. CORP. INTERNATIONAL INTERNATIONAL INTERNATIONAL IINC. INC. INC.FL NJ NJ CO CO CO PA PA MOCELOTHERM GAFTEMP 1/2" RECOVER NORD BOARD FESCO BOARD 1/2" RETROFIT PERLITE 1/2" RECOVER LUCASPERLITE PERMALITE BOARD BOARD ROOF INSULATION BOARD TAPERED PERLITECOATED COATED MODIFIED APP COATED COATEDASPHALTNONE NONE NONE NONE NONE NONE NONE NONE SAW CUTSURFACEYES YES NO NO YES NO YES NO YES1958 1958 1985 1987 1958 1982 1962 1985 1974HHI529b HHI529b ASTM C 728–91 ASTM C 728 ASTM C 728 ASTM C 728 HHI529b ASTM C 728–91 ASTM C 728–91ASTM C 728–91 ASTM C 728–91 ASTM C 728–9135 32 35 NOM 35 20 NOM. 35 NOM. 35 NOM. 40 NOM. 351.5 1.5 3.5 MAX. 3.5 1.5 MAX. 3.5 MAX. 1.5 MAX. 3.5 MAX. 1.540 40 1.0 NOM. 60 MIN. 40 MIN. 60 MIN. 60 NOM. 1.0 NOM. 40X X X X X X X XX X X X X X X X XX X XX X X0.75 0.75 0.50 0.50 0.75 0.5 0.75 0.50 0.750.48 0.48 0.72 0.76 0.48 0.76 0.48 0.72 0.482.08 2.08 1.39 1.32 2.08 1.32 2.08 1.32 2.080.6 0.6 0.50 0.8 0.6 0.46 0.6 0.50 0.61.0 1.0 1.0 1.0 1.00.36 0.36 0.36 0.36 0.362.78 2.78 2.78 2.78 2.780.8 0.98 0.8 0.8 0.081.5 1.5 1.5 1.5 1.50.24 0.24 0.24 0.24 0.244.17 4.17 4.17 4.17 4.171.2 1.2 1.2 1.2 1.22.0 2.0 2.0 2.0 2.00.18 0.18 0.18 0.18 0.185.56 5.56 5.56 5.56 5.561.6 1.6 1.6 1.6 1.62.5 3.0 2.5 3.00.15 0.12 0.15 0.126.67 8.33 6.67 8.332.0 2.4 2.0 2.43.0 3.00.12 0.128.33 8.332.4 2.4100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100SEE APPENDIXSEE APPENDIXSEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X345

Polyisocyanurate Roof Insulation Board Part 1: <strong>General</strong> Information(Homogeneous and Composite Boards)1. COMPANY NAME ALLIED ATLAS ATLAS ATLAS ATLASSIGNAL, ROOFING ROOFING ROOFING ROOFINGINC. CORP. CORP. CORP. CORP.2. STATE NC GA GA GA GA3. PRODUCT NAME ARMOR-R ACFOAM ACFOAM ACFOAM ACFOAMPLUS RECOVERBOARD SUPREME COMPOSITE NAIL BASEINSULATION4. HOMOGENEOUS OR COMPOSITE HOMOGENOUS HOMEGENEOUS HOMOGENOUS COMPOSITE COMPOSITE5. DENSITY PER ASTM D 1622 OR OTHER (homogeneous boards only) (lbs/ft 3 ) 2.0 NOM. 1.8 NOM. 2.0 NOM.6. COMPOSITE COMPONENTS: POLYISOCYANURATE INSULATION ANDExpanded PolystyreneExtruded PolystyrenePolyurethanePerliteXGypsum BoardFiber BoardPlywoodOtherOSB7. SURFACE TREATMENTTop Surface GLASS COATED GLASS MULTILAYER PERLITE OSBREINFORCED FOIL INSULATIONFELTBottom Surface GLASS COATED GLASS MULTILAYER FIBER FIBERREINFORCED FOIL REINFORCED REINFORCEDFELT FELT FELT8. AVAILABLE AS TAPERED MATERIAL (yes/no) YES NO NO YES NO9. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1987 1995 1988 1985 198510. COMMON AVAILABLE SIZES2' x 4'3' x 8'4' x 4' X X X X4' x 8' X X X X XOther (specify)11. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXAPPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI(OTHERS)12. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X X X X X1. COMPANY NAME ATLAS ATLAS ATLAS ATLAS CARLISLEROOFING ROOFING ROOFING ROOFING SYNTECCORP. CORP. CORP. CORP. INC.2. STATE GA GA GA GA PA3. PRODUCT NAME ACFOAM ACFOAM-II ACFOAM-III GEMINI POLYISOVENTED-R CRICKET HP4. HOMOGENEOUS OR COMPOSITE COMPOSITE HOMOGENEOUS HOMOGENEOUS HOMOGENEOUS HOMOGENOUS5. DENSITY PER ASTM D 1622 OR OTHER (homogeneous boards only) (lbs/ft 3 ) 2.0 NOM. 2.0 NOM. 2.0 NOM. 2.0 NOM.6. COMPOSITE COMPONENTS: POLYISOCYANURATE INSULATION ANDExpanded PolystyreneExtruded PolystyrenePolyurethanePerlitePERLITE OSBGypsum BoardFiber BoardPlywoodOtherOSB WITH VENTSPACERS7. SURFACE TREATMENTTop Surface VENTED OSB GLASS COATED GLASS GLASS FIBROUSREINFORCED REINFORCED FELTFELTFELTBottom Surface FIBER ELT GLASS COATED GLASS GLASS FIBROUSREINFORCED REINFORCED REINFORCED FELTFELT FELT FELT8. AVAILABLE AS TAPERED MATERIAL (yes/no) NO YES YES YES YES9. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1991 1987 1995 1998 198510. COMMON AVAILABLE SIZES2' x 4'3' x 8'4' x 4' X X X4' x 8' X X X XOther (specify)PRECUT CRICKET11. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX BOCA 93-39APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI ICBO 3826(OTHERS) SBCCI 9457METRO-DADE, FL97-111012. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X X X X X346

Polyisocyanurate Roof Insulation Board Part 1: <strong>General</strong> Information(Homogeneous and Composite Boards)CARLISLE CARLISLE CARLISLE CELOTEX CELOTEX CELOTEX FIRESTONE FIRESTONE FIRESTONESYNTEC SYNTEC SYNTEC CORP. CORP. CORP. BUILDING BUILDING BUILDINGINC. INC. INC. PRODUCTS INC. PRODUCTS, INC. PRODUCTS INCPA PA PA FL FL FL IN IN INPOLYISO POLYISO POLYISO HY-THERM HY-THERM HY-THERM AP ISO 95+ FIRESTONE FIRESTONEHP-N HP-W HP-H COMPOSITE NAIL-LINE ISOCYANURATE NAILBASE COMPOSITEHOMOGENOUS HOMOGENOUS HOMOGENOUS COMPOSITE COMPOSITE HOMOGENEOUS HOMOGENEOUS COMPOSITE COMPOSITE2.0 NOM. 2.0 NOM. 2.0 NOM. 2.0 NOM. 2.0 NOM.XXXXORIENTEDSTRAND BOARD7/16-IN. OSB1/2-IN STOCKFIBROUS FIBROUS FIBROUS FIBERBOARD OSB GLASS GLASS ORIENTED PERLITE ORFELT FELT FELT REINFORCED REINFORCED STRAND BOARD WOOD FIBERFELT ORGANIC MATFIBROUS FIBROUS FIBROUS GLASS GLASS GLASS GLASS GLASS GLASSFELT FELT FELT REINFORCED REINFORCED REINFORCED REINFORCED REINFORCED REINFORCEDFELT FELT FELT ORGANIC MAT ORGANIC MAT ORGANIC MATYES YES YES NO NO YES YES NO YES1985 1985 1998 1980 1980 1980X X X X X X X X XX X X X X X X XXBOCA 93-39 BOCA 93-39 BOCA 93-39 ICBO 2602 ASTM C 1289-95, ASTM C 1289-95, SEE APPENDIX SEE APPENDIX SEE APPENDIXICBO 3826 ICBO 3826 ICBO 3826 BOCA 2603.0 TYPE V TYPE IISBCCI 9457 SBCCI 9457 SBCCI 9457 SBCCI 2603METRO-DADE, FL METRO-DADE, FL METRO-DADE, FL ASTM C 1289-95,97-1110 97-1110 97-1110 TYPE IVSEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X X XFIRESTONE GAF GAF GAF GAF GAF GAF GAF JOHNSBUILDING MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MANVILLEPRODUCTS INC CORP CORP CORP. CORP. CORP. CORP. CORP. INTERNATIONALIN NJ NJ NJ NJ NJ NJ NJ COFIRESTONE EVEGUARD GAFTEMP GAFTEMP GAFTEM GAFTEMP GAFTEMP RA GAFTEMP RN ISO 1COMPOSITE ISO ISOTHERM R ISOTHERM RA ISOTHERM RN COMPOSITE COMPOSITE COMPOSITEBOARD BOARD BOARDCOMPOSITE HOMOGENEOUS HOMOGENEOUS HOMOGENEOUS HOMOGENOUS COMPOSITE COMPOSITE COMPOSITE HOMOGENOUS2.0 NOM. 2.0 NOM.X X XXX1/2-IN STOCKPERLITE OR ORGANIC / COMPOSITE GLASS GLASS FACER FIBERGLASSWOOD FIBER INORGANIC NON- FACER FACER REINFORCEDASPHALT FELTFACERGLASS R ORGANIC / COMPOSITE GLASS GLASS FACER COMPOSITE COMPOSITE COMPOSITE FIBERGLASSREINFORCED INORGANIC NON- FACER FACER FACER FACER FACER REINFORCEDORGANIC MAT ASPHALT FELT FACERYES YES YES YES YES YES YES YES YES1980 1985 1988 1992 1992 1988 1992 1992 1987X X X X X X X X XX X X X X X X X XX X XSEE APPENDIX CONTACT GAF SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXSEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXX X X X X X X X347

Polyisocyanurate Roof Insulation Board Part 1: <strong>General</strong> Information(Homogeneous and Composite Boards)1. COMPANY NAME JOHNS JOHNS JOHNS JOHNS JOHNSMANVILLE MANVILLE MANVILLE MANVILLE MANVILLEINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL2. STATE ME CO ME ME ME3. PRODUCT NAME NAILBOARD FESCO FOAM E'NRG'Y 2 E'NRG'Y 2 E'NRG'Y 2COMPOSITE PLUSCOMPOSITE4. HOMOGENEOUS OR COMPOSITE COMPOSITE COMPOSITE HOMOGENEOUS COMPOSITE COMPOSITE5. DENSITY PER ASTM D 1622 OR OTHER (homogeneous boards only) (lbs/ft 3 )6. COMPOSITE COMPONENTS: POLYISOCYANURATE INSULATION ANDExpanded PolystyreneExtruded PolystyrenePolyurethanePerlite X XGypsum BoardFiber BoardXPlywoodOtherX7. SURFACE TREATMENTTop Surface OSB FIBERLASS GLASS PERLITE WOODREINFORCED REINFORCED FELT FIBERBOARDFACERFELTBottom Surface GLASS PERLITE GLASS PERLITE GLASSREINFORCED REINFORCED FELT REINFORCEDFELT FELT FELT8. AVAILABLE AS TAPERED MATERIAL (yes/no) NO YES YES YES YES9. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1970 198310. COMMON AVAILABLE SIZES2' x 4'3' x 8'4' x 4' X X X X4' x 8' X X X X XOther (specify) X X11. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE UL DIRECT. SEE APPENDIX SEE UL DIRECT. SEE UL DIRECT. SEE UL DIRECT.APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI NBC 2603, NBC 2603, NBC 2603, NBC 2603,(OTHERS) SBC 717, SBC 717, SBC 717, SBC 717,UBC 1713 UBC 1713 UBC 1713 UBC 171312. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X X X X X1. COMPANY NAME KOPPERS KOPPERS RMAX, RMAX, RMAX,INDUSTRIES INDUSTRIES INC. INC. INC.INC.INC.2. STATE PA PA TX TX TX3. PRODUCT NAME KOP-R KOP-R MULTI-MAX MULTI-MAX FA TAPEREDISOCYANURATE COMPOSITE THERMAROOF4. HOMOGENEOUS OR COMPOSITE HOMOGENOUS COMPOSITE HOMOGENOUS HOMOGENOUS HOMOGENOUS5. DENSITY PER ASTM D 1622 OR OTHER (homogeneous boards only) (lbs/ft 3 ) 2.0 NOM. 2 2.0 2.06. COMPOSITE COMPONENTS: POLYISOCYANURATE INSULATION ANDExpanded PolystyreneExtruded PolystyrenePolyurethanePerliteXGypsum BoardFiber BoardPlywoodOther7. SURFACE TREATMENTTop Surface GLASS PERLITE GLASS FIBER GLASS FIBER GLASS FIBERREINFORCED INSULATIONFELTBottom Surface GLASS FIBER GLASS FIBER GLASS FIBER GLASS FIBERREINFORCED REINFORCEDFELTRELT8. AVAILABLE AS TAPERED MATERIAL (yes/no) YES YES NO YES9. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1987 1985 1985 1988 198610. COMMON AVAILABLE SIZES2' x 4'3' x 8'4' x 4' X X X X4' x 8' X X X XOther (specify) X X11. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIXAPPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI(OTHERS)12. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X X X X X348

Polyisocyanurate Roof Insulation Board Part 1: <strong>General</strong> Information(Homogeneous and Composite Boards)RMAX,INC.TXTHERMAROOFPLUSU.S. INTECINC.NJUSISOHOMOGENOUS HOMOGENOUS2.0 2.0 NOM.XGLASS FIBER GLASSALUMINUM REINFORCEDFOILFELTGLAS FIBER GLASSALUNINUM REINFORCEDFOILFELTNOYES1978 1987XXXSEE APPENDIXXXXSEE APPENDIXX349

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-951. COMPANY NAME ALLIEDSIGNAL ATLAS ATLAS ATLAS ATLASSIGNAL ROOFING ROOFING ROOFING ROOFINGCORP. CORP. CORP. CORP.2. PRODUCT NAME ARMOR-R PLUS ACFOAM-II ACFOAM-III ACFOAM ACFOAMRECOVERBOARD SUPREME3.1 PRODUCT TYPE*Type 1, Class 1 or Class 2 CLASS 1Type II X X X XType IIIType IVType VType VI3.2 PHYSICAL PROPERTY3.2.1 COMPRESSIVE STRENGTH (min., psi, nominal 1-in. core foam) 16 20 20 20 16 203.2.2 DIMENSIONAL STABILITY (nominal, 1-in. core foam)Percent linear change, max. (-40 O F)Type I, Class 1; Types II-VI 2.0 < 2 < 2 < 2 < 2 < 2Type I, Class 2 (amb. RH 158 O F) 1.5Type I, Class 1 2.0 < 2Type II-VI 4.0 < 4 < 4 < 4 < 4Type I, Class 2 (97% RH 200 O F) 1.5Type I, Class 1; Types II-VI 4.0Type I, Class 2 1.53.2.3 FLEXURAL STRENGTH (nominal, 1-in. core foam)Modulus of rupture, psi, min.Types I-V 40 40 40 40 40 40Type VI 50Break load, lbf, min.Type I 8Types II-V 17 17 17 17 8Type VI 333.2.4 TENSILE STRENGTH (psf, min., perpendicular to board surface,nominal 1-in. core foam) 500 500 500 500 500 5003.2.5 WATER ABSORPTION (2H % by vol., max., nom. 1-in. core surface)Types I, III, V 1.0 < 1Types II, VI 1.5 < 1 < 1 < 1 < 1Type IV 2.03.2.6 WATER TRANSMISSION (perm., max., nominal 1-in. core surface)Type I 0.3Type II 1.0

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-95ATLAS ATLAS ATLAS ATLAS CARLISLE CARLISLE CARLISLE CARLISLE CELOTEXROOFING ROOFING ROOFING ROOFING SYNTEC SYNTEC SYNTEC SYNTEC CORP.CORP. CORP. CORP. CORP. INC. INC. INC. INC.ACFOAM ACFOAM NAIL- ACFOAM GEMINI CRICKET POLYISO POLYISO POLYISO POLYISOO HY-THERMCOMPOSITE BASE INSULATION VENTED-R CRICKET HP HP-N HP-W HP-H COMPOSITEXXXX X X XX20 20 20 20 16 16 16 16< 2 < 2 < 2 < 2 2< 4 < 4 < 4 < 4 2.0 2.0 2.0 2.0 4< 4 < 4 < 4 < 4 440 40 40 40 40 40 40 40 4017 17 17 17 17 17 17 17 17500 500 500 500 500 500 500 500 500< 1 < 1 < 1 < 11.5 1.5 1.52

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-951. COMPANY NAME CELOTEX CELOTEX FIRESTONE FIRESTONE FIRESTONECORP. CORP. BUILDING BUILDING BUILDINGPRODUCTS INC. PRODUCTS INC. PRODUCTS INC.2. PRODUCT NAME HY-THERM HY-THERM AP ISO 95+ FIRESTONE FIRESTONENAIL-LINE ISOCYANURATE COMPOSITE COMPOSITE3.1 PRODUCT TYPE*Type 1, Class 1 or Class 2Type II X XType IIIXType IVXType VXType VI3.2 PHYSICAL PROPERTY3.2.1 COMPRESSIVE STRENGTH (min., psi, nominal 1-in. core foam) 16 16 16 20 20 203.2.2 DIMENSIONAL STABILITY (nominal, 1-in. core foam)Percent linear change, max. (-40 O F)Type I, Class 1; Types II-VI 2.0 2 2 2.0 2 2Type I, Class 2 (amb. RH 158 O F) 1.5Type I, Class 1 2.0Type II-VI 4.0 4 4.0 4 4Type I, Class 2 (97% RH 200 O F) 1.5Type I, Class 1; Types II-VI 4.0 4 4.0 4 4Type I, Class 2 1.53.2.3 FLEXURAL STRENGTH (nominal, 1-in. core foam)Modulus of rupture, psi, min.Types I-V 40 40 40 40 40 40Type VI 50Break load, lbf, min.Type I 8Types II-V 17 17 17 17 17 17Type VI 333.2.4 TENSILE STRENGTH (psf, min., perpendicular to board surface,nominal 1-in. core foam) 500 500 500 500 500 5003.2.5 WATER ABSORPTION (2H % by vol., max., nom. 1-in. core surface)Types I, III, V 1.0 1 1Types II, VI 1.5 1.5 1.5Type IV 2.0 23.2.6 WATER TRANSMISSION (perm., max., nominal 1-in. core surface)Type I 0.3Type II 1.0 1 1Types III-VINA3.3 MINIMUM THERMAL RESISTANCE @ 40 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 7.21-inch product Type I, Class 2 7.91-inch product Type II 6.6 6.61.5-inch product Type I, Class 1 10.81.5-inch product Type I, Class 2; Type II 11 11.01.5-inch product Type III 8.1 8.11.5-inch product Type IV 8.0 81.5-inch product Type V 7.1 7.12-inch product Type I, Class 1 14.32-inch product Type I, Class 2 15.82-inch product Type II 15.7 15.72-inch product Type III 12.5 12.52-inch product Type IV 12.4 12.42-inch product Type V 11.5 11.52-inch product Type VI 8.6MINIMUM THERMAL RESISTANCE @ 75 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 6.51-inch product Type I, Class 2 7.21-inch product Type II 6.0 6 6.01.5-inch product Type I, Class 1 9.81.5-inch product Type I, Class 2; Type II 10.0 10 10.01.5-inch product Type III 7.4 7.41.5-inch product Type IV 7.3 7.31.5-inch product Type V 6.5 6.52-inch product Type I, Class 1 13.02-inch product Type I, Class 2 14.42-inch product Type II 14.3 14.3 14.32-inch product Type III 11.4 11.42-inch product Type IV 11.3 11.32-inch product Type V 10.5 10.52-inch product Type VI 7.5MINIMUM THERMAL RESISTANCE @ 110 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 5.91-inch product Type I, Class 2 6.51-inch product Type II 5.4 5.41.5-inch product Type I, Class 1 8.81.5-inch product Type I, Class 2; Type II 9.0 9.01.5-inch product Type III 6.7 6.71.5-inch product Type IV 6.6 6.61.5-inch product Type V 5.9 5.92-inch product Type I, Class 1 11.72-inch product Type I, Class 2 13.02-inch product Type II 12.9 12.92-inch product Type III 10.3 10.32-inch product Type IV 10.2 10.22-inch product Type V 9.5 9.52-inch product Type VI 6.74. SEE APPENDIX IF CHECKED X X X* See Introduction to insulation section for full descriptions of product typesNA=not applicable352

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-95FIRESTONE GAF GAF GAF GAF GAF GAF GAF JOHNSBUILDING MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MANVILLEPRODUCTS INC. CORP. CORP. CORP. CORP. CORP. CORP. CORP. INTERNATIONALFIRESTONE GAFTEMP GAFTEMP GAFTEM EVERGUARD ISO COMPOSITEBOARD GAFTEMP RA GAFTEMP RN ULTRAGARDNAILBASE ISOTHERM R ISOTHERM RA ISOTHERM RN COMPOSITE COMPOSITEXX X X X XXXXX20 20 20 20 16 20 20 20 202 2.0 2 2.0 2 2 2 2 < 2.04 2.0 2 2.0 2 2 2 2 < 4.04 4.0 4.0 4.0 2 4 4 4 < 4.040 40 40 40 40 40 40 40 > 4017 17 17 17 8 17 17 17 > 17500 500 500 500 500 500 500 500 > 5001 1 11.5 1.5 1.5 1.0 < 1.52 21.0 1.0 1.0 1.0 > 1.06.6 6.6 6.6 6.6 > 6.67.111.0 11.0 11.0 1.0 > 11.08.1 8.18 811.515.7 15.7 15.7 15.7 > 15.712.5 12.512.4 12.46.0 6.0 6.0 6.0 > 6.06.510.0 10.0 10.0 10.0 > 10.07.4 7.47.3 7.310.514.3 14.3 14.3 14.3 > 14.311.4 11.411.3 11.35.4 5.4 5.4 5.4 > 5.45.99 9 9 9 > 9.06.7 6.76.6 6.69.5X12.9 12.9 12.9 12.9 > 12.910.3 10.310.2 10.2X353

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-951. COMPANY NAME JOHNS JOHNS JOHNS JOHNS JOHNSMANVILLE MANVILLE MANVILLE MANVILLE MANVILLEINTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL INTERNATIONAL2. PRODUCT NAME FESCO FOAM E'NRGY' 2 E'NRG'Y 2 E'NRG'Y 2 E'NRG'Y 2FF COMPOSITE PLUS3.1 PRODUCT TYPE*Type 1, Class 1 or Class 2XType IIXType III X XType IVXType VType VI3.2 PHYSICAL PROPERTY3.2.1 COMPRESSIVE STRENGTH (min., psi, nominal 1-in. core foam) 16 16 20/25 20/25 20/25 20/253.2.2 DIMENSIONAL STABILITY (nominal, 1-in. core foam)Percent linear change, max. (-40 O F)Type I, Class 1; Types II-VI 2.0 < 2.0 2 2 2 2Type I, Class 2 (amb. RH 158 O F) 1.5Type I, Class 1 2.0 2Type II-VI 4.0 < 4.0 2 2 2Type I, Class 2 (97% RH 200 O F) 1.5Type I, Class 1; Types II-VI 4.0 < 4.0 2 2 2 2Type I, Class 2 1.53.2.3 FLEXURAL STRENGTH (nominal, 1-in. core foam)Modulus of rupture, psi, min.Types I-V 40 > 40 40 40 40 40Type VI 50Break load, lbf, min.Type I 8 8Types II-V 17 > 17 17 17 17Type VI 333.2.4 TENSILE STRENGTH (psf, min., perpendicular to board surface,nominal 1-in. core foam) 500 500 500 500 500 5003.2.5 WATER ABSORPTION (2H % by vol., max., nom. 1-in. core surface)Types I, III, V 1.0 < 1.0 1 1Types II, VI 1.5 1.5Type IV 2.0 23.2.6 WATER TRANSMISSION (perm., max., nominal 1-in. core surface)Type I 0.3 0.3Type II 1.0 1Types III-VINA3.3 MINIMUM THERMAL RESISTANCE @ 40 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 7.2 7.91-inch product Type I, Class 2 7.91-inch product Type II 6.6 6.61.5-inch product Type I, Class 1 10.8 111.5-inch product Type I, Class 2; Type II 11 111.5-inch product Type III 8.1 > 8.1 81.5-inch product Type IV 8.0 81.5-inch product Type V 7.12-inch product Type I, Class 1 14.3 15.72-inch product Type I, Class 2 15.82-inch product Type II 15.7 15.72-inch product Type III 12.5 > 12.5 12.52-inch product Type IV 12.4 12.52-inch product Type V 11.52-inch product Type VI 8.6MINIMUM THERMAL RESISTANCE @ 75 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 6.5 7.21-inch product Type I, Class 2 7.21-inch product Type II 6.0 61.5-inch product Type I, Class 1 9.8 10.81.5-inch product Type I, Class 2; Type II 10.0 101.5-inch product Type III 7.4 > 7.4 7.41.5-inch product Type IV 7.3 7.31.5-inch product Type V 6.52-inch product Type I, Class 1 13.0 14.42-inch product Type I, Class 2 14.42-inch product Type II 14.3 14.32-inch product Type III 11.4 > 11.4 11.42-inch product Type IV 11.3 11.32-inch product Type V 10.52-inch product Type VI 7.5MINIMUM THERMAL RESISTANCE @ 110 ± 2 O F MEAN TEMPERATURE1-inch product Type I, Class 1 5.9 5.91-inch product Type I, Class 2 6.51-inch product Type II 5.4 6.41.5-inch product Type I, Class 1 8.8 8.81.5-inch product Type I, Class 2; Type II 9.0 91.5-inch product Type III 6.7 > 6.7 6.71.5-inch product Type IV 6.6 6.61.5-inch product Type V 5.92-inch product Type I, Class 1 11.7 132-inch product Type I, Class 2 13.02-inch product Type II 12.9 12.92-inch product Type III 10.3 > 10.3 10.32-inch product Type IV 10.2 10.22-inch product Type V 9.52-inch product Type VI 6.74. SEE APPENDIX IF CHECKED X* See Introduction to insulation section for full descriptions of product typesNA=not applicable354

Polyisocyanurate Roof Insulation Board Part 2: Test ResultsTest description and suggested values as specified in ASTM C 1289-95JOHNS JOHNS KOPPERS KOPPERS RMAX, INC. RMAX, INC. RMAX, INC. RMAX, INC. U.S. INTECMANVILLE MANVILLE INDUSTRIES INDUSTRIESINTERNATIONAL INTERNATIONAL INC. INC.NAILBOARD E'NRG'Y 2 GYPSUM KOP-R KOP-R MULTI-MAX MULTI-MAX FA TAPERED THERMAROOF USISOCOMPOSITE ISOCYANURATE COMPOSITE THERMAROOF PLUSCLASS 1X X X X XXX20/25 20/25 20 20 > 16 > 16 > 16 > 16 202 2 < 2.0 < 2.0 < 2.0 < 2.0 < 2.0 < 2.0 < 2.0< 2.02 2 < 4.0 < 4.0 < 4.0 < 4.0 < 4.0 < 4.02 2 < 4.0 < 4.0 < 4.0 < 4.0 < 4.040 40 > 40 > 40 > 40 > 4017 17 > 17 > 17 > 17> 8500 500 500 > 500 > 500 > 500 > 5001 < 1.0 1.01.5 < 1.5 < 1.5 < 1.5 1.0 > 1.0 > 1.0

Composite Roof Insulation Board1. COMPANY NAME AFM R-CONTROL AFM R-CONTROL BENCHMARK BENCHMARK BENCHMARKBUILDING BUILDING FOAM FOAM FOAMSYSTEMS SYSTEMS INC. INC. INC.2. STATE MN MN SD SD SD3. PRODUCT NAME AFM PERFORM AFM CONTOUR PERMAFOAM ENERCEPT PERMAFOAM1, 2 & 3 TAPER TILE COMPOSITE PANELS COMOSITE4. COMPOSITE COMPONENTSExpanded Polystyrene X X X XExtruded PolystyrenePolyurethanePolyisocyanuratePerlite X X XGypsum BoardXFiber Board X XPlywood X X X XOther X X5. SURFACE TREATMENTAsphalt <strong>Roofing</strong> FeltFoil Facer X XKraft PaperOther X X6. AVAILABLE AS TAPERED MATERIAL NO YES YES NO YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1971 1966 1977 1982 19778. COMMON AVAILABLE SIZES2' x 4' X X X X3' x 4'4' x 4' X X X X4' x 8' X X X XOther X X 4 x 12 OR 4 x 16COMMON AVAILABLE THICKNESSESWATER ABSORPTION, TRANSVERSE STRENGTH, C-VALUES, R-VALUES, PERCENT BY VOLUME9.1 Thickness (inches) 2.67 2.67 2.0 8.0 2.0Thermal Conductance (C) @75 F 0.103 0.103 0.10 0.033 0.10Thermal Resistance (R) @75 F 9.73 9.73 10.0 30.30 10.0Weight (lbs/ft 2 ) 0.8 0.89.2 Thickness (inches) 4.16 4.16 4.0 6.0 4.0Thermal Conductance (C) @75 F 0.065 0.065 0.06 0.045 0.05Thermal Resistance (R) @75 F 15.47 15.47 16.67 22.22 20.0Weight (lbs/ft 2 ) 0.93 0.939.3 Thickness (inches) 7.36 7.36 6.0 6.0Thermal Conductance (C) @75 F 0.036 0.036 0.04 0.04Thermal Resistance (R) @75 F 27.79 27.79 25.0 25.0Weight (lbs/ft 2 ) 1.2 1.29.4 Thickness (inches) 2.67 2.67 8.0 8.0Thermal Conductance (C) @75 F 0.093 0.093 0.03 0.03Thermal Resistance (R) @75 F 10.77 10.77 33.33 33.33Weight (lbs/ft 2 ) 0.98 0.989.5 Thickness (inches) 4.16 4.16Thermal Conductance (C) @75 F 0.058 0.058Thermal Resistance (R) @75 F 17.3 17.3Weight (lbs/ft 2 ) 1.23 1.239.6 Thickness (inches) 7.36 7.36Thermal Conductance (C) @75 F 0.032 0.032Thermal Resistance (R) @75 F 31.21 31.21Weight (lbs/ft 2 ) 1.76 1.7610. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100 100@ 10 years 100 100 100 100 10011. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIX SEE APPENDIX ICBO 4246APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCI HUD 1067(OTHERS) RADCO 116512. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X XNA=not applicable356

Composite Roof Insulation BoardBENCHMARK BIG SKY BIG SKY BIG SKY CARPENTER CARPENTER CARPENTER CARPENTER CARPENTERFOAM INSULATIONS INSULATIONS INSULATIONS INSULATION INSULATION INSULATION INSULATION INSULATIONINC. INC. INC. INC. COMPANY COMPANY COMPANY COMPANY COMPANYSD MT MT MT VA VA VA VA VAPERMAFOAM EPS-PERLITE EPS-GYPSUM EPS-FIBERBOARD CARPENTER CARPENTER CARPENTER CARPENTER CARPENTERCOMPOSITE COMPOSITE COMPOSITE COMPOSITE EPS / PLYWOOD EPS / PERLITE EPS / SYTROFOIL EPS / GYPSUM EPS /WAFERBOARDX X X X X X X X XX X XXXXXXXXXYES YES YES YES YES YES YES YES YES1977 1981 1981 1981 1977 1977 1977 1977 1977X X X X XX X X X X X X XX X X X X X X XX2.0 1.75 1.5 1.5 1.5 1.75 1.0 1.5 1.50.10 0.169 0.233 0.193 0.22 0.168 0.259 0.23 0.2010.0 5.92 4.29 5.18 4.48 5.94 3.86 4.28 5.080.769 1.062 0.753 1.5 0.68 0.085 2.18 1.54.0 2.25 2.0 2.0 2.0 2.25 2.0 2.0 2.00.06 0.127 0.161 0.14 0.156 0.126 0.129 0.16 0.1416.67 7.87 6.21 7.14 6.40 7.86 7.75 6.21 7.00.811 1.104 0.795 1.53 0.73 0.17 2.23 1.536.0 2.75 2.5 2.5 2.5 2.75 2.5 2.5 2.50.04 0.102 0.123 0.11 0.12 0.102 0.104 0.12 0.1125.0 9.80 8.13 9.09 8.33 9.78 9.62 8.13 8.930.853 1.146 0.837 1.57 0.77 0.22 2.27 1.578.0 3.25 3.0 3.0 3.0 3.25 3.0 3.0 3.00.03 0.085 0.099 0.091 0.097 0.085 0.086 0.099 0.09233.33 11.76 10.10 10.99 10.35 11.71 11.63 10.06 10.850.845 1.187 0.878 1.61 0.81 0.255 2.31 1.613.75 3.5 3.5 3.5 3.75 3.5 3.5 3.50.073 0.083 0.077 0.082 0.073 0.074 0.083 0.07813.70 12.05 12.99 12.18 13.63 13.51 11.98 12.770.936 1.229 0.92 1.65 0.85 0.30 2.35 1.654.25 4.0 4.0 4.0 4.25 4.0 4.0 4.00.064 0.072 0.067 0.07 0.064 0.065 0.072 0.06815.63 13.89 14.93 14.11 15.55 15.38 13.90 14.700.978 1.271 0.96 1.7 0.90 0.34 2.4 1.7100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100100 100 100 100 100 100 100 100 100357

Composite Roof Insulation Board1. COMPANY NAME CARPENTER DOW INSULATED INSULATED POLYFOAMINSULATION CHEMICAL BUILDING BUILDING PACKERSCOMPANY COMPANY SYSTEMS SYSTEMS CORP.2. STATE VA CANADA VA VA IL3. PRODUCT NAME CARPENTER ROOFMATE CT AFM PERFORM AFM CONTOUR THERMOSAFEEPS / 1, 2 & 3 TAPER TILE PLUS WITHWAFERBOARDFIBERBOARD4. COMPOSITE COMPONENTSExpanded Polystyrene X X X XExtruded PolystyreneXPolyurethanePolyisocyanuratePerlite X XGypsum BoardFiber Board X X X XPlywood X XOther X X5. SURFACE TREATMENTAsphalt <strong>Roofing</strong> FeltXFoil Facer X X XKraft PaperXOther X X X X6. AVAILABLE AS TAPERED MATERIAL YES NO NO YES YES7. YEAR FIRST USED IN COMMERCIAL ROOFING SYSTEM 1977 1985 1971 1966 19908. COMMON AVAILABLE SIZES2' x 4' X X X3' x 4' X4' x 4' X X X X4' x 8' X X XOther X X XCOMMON AVAILABLE THICKNESSESWATER ABSORPTION, TRANSVERSE STRENGTH, C-VALUES, R-VALUES, PERCENT BY VOLUME9.1 Thickness (inches) 1.5 1.5 1.5 1.5Thermal Conductance (C) @75 F 0.19 0.193 0.193 0.174Thermal Resistance (R) @75 F 5.17 5.18 5.18 5.74Weight (lbs/ft 2 ) 0.83 0.83 0.83 0.769.2 Thickness (inches) 2.0 2.0 2.0 2.5Thermal Conductance (C) @75 F 0.14 0.141 0.141 0.099Thermal Resistance (R) @75 F 7.10 7.09 7.09 10.09Weight (lbs/ft 2 ) 0.88 0.85 0.85 0.939.3 Thickness (inches) 2.5 2.5 2.5 3.5Thermal Conductance (C) @75 F 0.11 0.111 0.111 0.069Thermal Resistance (R) @75 F 9.02 9.01 9.01 14.44Weight (lbs/ft 2 ) 0.92 0.88 0.88 1.19.4 Thickness (inches) 3.0 3.0 3.0 4.5Thermal Conductance (C) @75 F 0.091 0.091 0.091 0.053Thermal Resistance (R) @75 F 10.95 10.99 10.99 18.79Weight (lbs/ft 2 ) 0.96 0.92 0.92 1.279.5 Thickness (inches) 3.5 3.5 3.5 5.5Thermal Conductance (C) @75 F 0.078 0.078 0.078 0.043Thermal Resistance (R) @75 F 12.87 12.82 12.82 23.14Weight (lbs/ft 2 ) 0.99 0.964 0.964 1.439.6 Thickness (inches) 4.0 4.0 4.0 6.5Thermal Conductance (C) @75 F 0.068 0.068 0.068 0.036Thermal Resistance (R) @75 F 14.80 14.71 14.71 27.49Weight (lbs/ft 2 ) 1.04 1.0 1.0 1.610. ESTIMATED PERCENTAGE OF THERMAL VALUE RETENTION(assuming a continuous mean temperature @ 1 year 100 100 100 100differential and constant moisture content) @ 5 years 100 100 100 100@ 10 years 100 100 100 10011. UL "P" DESIGN NUMBERS; BUILDING CODE AGENCY SEE APPENDIX SEE APPENDIX UL R14213,APPROVED DESIGN NUMBERS; ICBO, BOCA, SBCCIFM OV8A0.AC,(OTHERS)FM OV8A1.AC,FM OV8A2.AC,CABO 236,238, 384, 47912. LIMITATIONS AND/OR RESTRICTIONS SEE APPENDIX SEE APPENDIX SEE APPENDIX13. SEE APPENDIX IF CHECKED X X XNA=not applicable358

Composite Roof Insulation BoardPOLYFOAM POLYFOAM T-CLEAR T-CLEARPACKERS PACKERS CORPORATION CORPORATIONCORP.CORP.IL IL OH OHTHERMOESAFE THERMOSAFE PLUS LIGHTGUARD HEAVYGUARDPLUS WITH WITH FIBERBOARDPERLITE AND PERLITEXXXXXXXCONCRETECONCRETEXXXX 3/8" CONCRETE 15/16" CONCRETEYES YES NO NO1990 1990 1976 1983X X X XXXXXXXXX1.75 2.25 2 2.00.155 0.127 0 0.16.43 7.82 10 100.76 1.36 5 112.75 3.25 3 30.092 0.082 0 0.0610.78 12.17 15 150.93 1.53 5 113.75 4.250.066 0.0615.13 16.521.1 1.74.75 5.250.051 0.04819.48 20.871.27 1.875.75 6.250.042 0.0423.83 25.221.43 2.036.75 7.250.035 0.03428.18 29.571.6 2.2100 100 100 100100 100 98 98100 100 95 95UL R14213, UL R14213, P 225, 229, 230, P 225, 229, 230,FM OV8A0.AC, FM OV8A0.AC, 235, 404, 505, 235, 404, 505,FM OV8A1.AC, FM OV8A1.AC, 507, 714, 803, 507, 714, 803,FM OV8A2.AC, FM OV8A2.AC, 904 904CABO 236, CABO 236,238, 384, 479 238, 384, 479SEE APPENDIX SEE APPENDIX PMR INSULATION PMR INSULATIONXX359

Appendix, Rigid Board InsulationAFM R-CONTROL BUILDING SYSTEMSThe following companies, included in the Low-SlopeGuide <strong>Index</strong> to Listed Roof Board Insulations,manufacture AFM Perform, AFM Contour Taper Tile,and AFM Perform Protect expanded polystyreneinsulations; AFM Contour Taper Tile-X extrudedpolystyrene insulation in both 1.4 and 1.8 densities;and AFM Perform 1, 2, and 3 and AFM PerformContour Taper Tile composite insulations: AdvanceFoam Plastics, Inc., Colo. (5250 N. Sherman St.,Denver 80216, 303/297-3844); Advance Foam Plastics,Inc., Utah (111 W. Fireclay Ave., Murray, UT84107, 801/265-3465); Advance Foam Plastics, Inc.,Nevada (902 Kleppe Lane, Sparks, NV 89431775/355-7655); Allied Foam Products, Inc. (1604Athens Hwy/Box 2861, Gainesville, GA 30503,770/536-7900); Big Sky Insulations, Inc., 15 ArdenDrive, P.O. Box 838, Belgrade, MT 59714, 406/388-4146; Branch River Foam Plastics, Inc., 15 ThruberBlvd., Smithfield, RI 02917, 401/232-0270; ContourProducts, Inc. Kansas City and Newton, Kansas (4001Kaw Drive, Kansas City, KS 66102, 913/321-4114);Flexible Packaging, Co. (P.O. Box 4321, Bayamon, PR00958, 787/786-8405 Insulated Building Systems, Inc.,326 McGhee Road, Winchester, VA 22603, 540/662-0882); Team Industries, Inc. (4580 Airwest Drive S.E.,Grand Rapids, MI 49508, 616/698-2001; NPSCorporation (Industrial Drive/POB 348, Perryville, MO63775, 573/547-8388); Pacemaker Plastics Co., Inc.(126 New Pace Rd. P.O. Box 279, Newcomerstown,OH 43832, 800/446-2188); Pacific Allied Products,Ltd. (Campbell Industrial Park, 91-102B Kaomi Loop,Kapolei, HI 96707, 808/682-2038); Poly Foam,Inc.(116 Pine Street So., Lester Prairie, MN 55354,320/345-2351); Stanark Plastics (Highway 70East/Box 3231, North Little Rock, AR 72117,501/945-1114); Therma Foams, Inc. (P.O. Box161128, Ft. Worth, TX 76161, (817 / 624 -7204) ;Thermal Foam, Inc., 2101 Kenmore Ave., Buffalo, NY14207 (716/874-6474); Thermal Foams/Syracuse, Inc.(6173 South Bay Rd/Box 396, Cicero, NY 13039,315/699-8734, 800/873-6267); Wisconsin EPS, (90Trowbridge Drive/FOB 669, Fond Du Lac, WI 54935;920/923-4146). See the appropriate listing under AFMCorporation for a description of these products.AFM Perform, Contour Taper Tile, and AFMPerform Protect Roof Insulations: UL listing: AFMPerform and Contour Taper Tile EPS Roof Insulationshave been tested under UL 790 and ASTM E108 forflame-spread classification. The AFM listing providesfor the use of Perform and Contour Taper Tile inunlimited thickness in any UL-classified roof membraneassembly. EPS may be of uniform thickness ortapered. AFM UL-classified EPS may be used in thefollowing assemblies as designated in the 1999 ULFire Resistance Directory: P211, P225, P230, P231,P238, P246, P250, P251, P254, P255, P261, P262,P410, P411, P508, P509, P510, P511, P513, P514,P515, P701, P710, P711, P713, P717, P801, P803,P814, P815, P817, P818, P902, P909, P912, P915,P919, P920, P921, P922, P923, J999, K902, Const.No. 237, Cons. No. 458. AFM EPS may be substitutedfor other UL-listed insulation products in UL-rated roofassemblies. See UL <strong>Roofing</strong> Materials Directory forcomplete listing. Building Codes: ICBO 4169, , BOCA94-65, SBCCI 94136, AFM UL file number R11812.The AFM Quality-Control Program and Third-PartyCertification Program meet or exceed all requirementsfor ICBO, BOCA, and SBCCI.Installation: Follow recommended installationguidelines contained in AFM Perform, Contour TaperTile Spec-Data form. Warranty: AFM Perform andContour Taper Tile, and Perform Protect are coveredby a 20-year, 100 percent R-value-retention warranty.Consult AFM for specific details.ALLIEDSIGNALAlliedSignal Armor-R Plus features a closed-cellpolyisocyanurate foam core laminated to heavy black(nonasphaltic) glass fiber reinforced felt facers.Compliances: Federal specifications: HH-I-1972/GEN;HH-I-1972/2, Class 1; HH-I-1972/1, Class 1; H-I-1972/3; Metro-Dade County, Fla.; California StateInsul. Qual. Standards & Title 25 Foam FlammabilityCriteria (License #TC 1231); BOCA, ICBO, and SBCCIsections on foam insulation; FM Standard 4450/4470approval for Class 1 insulated roof deck construction;UL Standard 1256 Classification: insulated metal deckconstruction assemblies, Construction Nos. 120 & 123;UL Standard 790 Classification: Class A; UL Standard263 Fire Resistance Classification listings: P225,P230, P259, P263, P508, P510, P514, P701, P713,P717, P718, P719, P720, P722, P723, P724, P725,P728, P729, P730, P732, P801, P814, P815, P817,P818, P819, and P823. Canada/CGSB 51.26-M86-Type 3 CCMC No. 12-464-R.APACHE PRODUCTS COMPANYPlease refer to Apache Products catalogs forapplication and installation information. Please followall restrictions, limitations, and warnings containedtherein. Following are Apache plant locations:isocyanurate insulation only: Belvidere, Ill., 1005McKinley Ave. P.O. Box 7, 61008, 815/544-3193,360

800/435-5493; Jackson, Miss., 100 Apache Road,P.O. Box 7111, 39282-7111, 601/373-1222, 800/648-2154; Linden, N.J., 2025 East Linden Ave., P.O. Box1009, 07036, 908/486-6723, 800/526-4056; andRiverside, Calif., 6942 Ed Perkic St., 92504, 909/687-7070, 800/241-7444; isocyanurate and expandedpolystyrene: Anderson, S.C., 5720 Highway 81 South,Starr, SC 29684, 803/296-3424, 800/845-3080;expanded polystyrene only: Lakeland, Fla., 4500 SouthFrontage Rd., 33801, 813/688-8879; Miami, Fla., 1020S.W. 69th Ave., P.O. Box 4440488, 33144, 305/261-4637; Union, Miss., Industrial Park, P.O. Box 160,Union, MS 39365, 601/774-8285, 800/530-7762.ATLAS ROOFING CORPORATIONACFoam-II features a closed-cell polyisocyanuratefoam core laminated to heavy black (nonasphaltic)glass-fiber reinforced felt facers. This product issuitable for all single-ply systems. Available in non-HCFC formulation.ACFoam III also features the closed-cell foam coreintegrally laminated to heavy coated glass facers. It isspecifically designed for all single-ply, cold-appliedBUR, and cold-applied modified bitumen membranesystems. Do not use with hot-applied membranes.ACFoam Supreme has a polyisocyanurate foamcore with tri-laminate foil facers and provides THEhighest R-value of all ACFoam products. Specificallydesigned for use with mechanically fastened and looselaid ballasted single-ply systems, ACFoam Supremeshould not be used directly with hot asphalt or torchappliedsystems.ACFoam Composite consists of a polyisocyanuratefoam core bonded to 1/2-in. perlite on one side and aheavy black (nonasphaltic) glass-fiber reinforced felt onthe other side. The perlite eliminates the need forcover boards or vented base sheets normallyrecommended over foam insulation. The product isrecommended for use with BUR, modified bitumen,and single-ply roofing systems.ACFoam Recover Board is part of the Atlas familyof thermally efficient polyiso foam board insulations.The foam core of Recover Board is a Class 1 fire-ratedfoam core and is coverd on both sides with a heavy,strong coated fibrous facer.Tapered ACFoam features a closed-cellpolyisocyanurate foam core laminated to heavy black(nonasphaltic) glass-fiber reinforced felt facers. It isavailable in 4' x 4' panels with slopes of 1/8-in., 1/4-in.,and 1/2-in./ft.ACFoam Nail Base Insulation provides a base fornon-asphaltic shingles, tile, or metal roof panels andmay be applied over wood or steel decking. Particularlysuited for cathedral ceiling and log home applications,the product is a polyisocyanurate foam core that isfaced with glass-fiber reinforced facers and bonded to7/16-in. APA-rated OSB.Vented-R is a polyiso insulation, laminated to OSB,constructed with ventilation spaces to reduce heatbuildup.Compliances: (Check with Atlas for specificapplications for each product.) federal specificationsHH-I-1972/GEN; HH-I-1972/2, Class 1; HH-I-1972/1,Class 1; HH-I-1972/3; Metro-Dade County, FL No. 96-0612.01; Calif. State Insul. Qual. Standards & Title 25Foam Flammability Criteria (License #TC 1231);BOCA, ICBO, and SBCCI sections on foam insulation;FM Standard 4450/4470 approval for Class 1 insulatedroof deck construction; UL Standard 1256Classification: insulated metal deck constructionassemblies, Construction Nos. 120 & 123; ULStandard 790 Classification: Class A with most roofmembrane systems; UL Standard 263 Fire ResistanceClassification (ACFoam-II/ACFoam Composite, NailBase and Vented-R): some listings are P225, P230,P232, P259, P263, P508, P510, P514, P701, P710,P713, P717, P718, P719, P720, P722, P723, P724,P725, P728, P729, P730, P732, P801, P814, P815,P817, P818, P819, and P823. ASTM C1289-95, TypeII; C1289-95, Type V; C1289-95, Type I, Class I;C1289-95, Type III. Meets Can/CGSB Standards,CCMC No. 12464-L, CCMC No. 12423-L, and CCMCNo. 12422-R.BIG SKY INSULATIONS, INC.SnoFoam EPS: Approvals: ASTM C-578-87a, ICBO4169, UL P design numbers: P211, P225, P230,P231, P232, P238, P246, P250, P251, P254, P255,P261, P262, P410, P411, P508, P509, P510, P511,P513, P514, P515, P701, P710, P713, P715,P717,P801, P803, P814, P815, P817, P818, P902,P909, P912, P915, P919, P920, P921, P922, P923,J999, K901, K902, K903.CARLISLE SYNTEC INCORPORATEDSure-Seal EPS Insulation: UL Classified, FMApproved; Sure-Seal EPS Foam must be protectedfrom: (a) temperatures greater than 160 F.; (b) oil,solvents, and other aliphatic or hydrocarbonsubstances that could degrade the foam. When usedover coal tar roof membranes, the following proceduresapply: (a) The coal tar roof membrane to be coveredmust have been exposed in field surface environmentfor at least five years. (b) A minimum one-half inchbutt-joined wood fiberboard separation barrier isinstalled prior to laying of the EPS. (c) The systemdesign temperature does not exceed 130 F at the coaltar membrane/wood fiberboard interface. Protect fromsunlight during storage. Review the Carlisle EPS361

Material Safety Data Sheet for complete safetyinformation prior to use.Thermapink 18/25/40; and Dow Dechmate,Plazamate and Recovermate; FM approved. Productshould not be used in contact with chimneys, heatervents, steam pipes, or other surfaces wheretemperatures exceed 150 F. Product should beinstalled under a membrane applied to a substratehaving an adequate fire rating as required by buildingcodes, over metal or combustible deck. Separatorsheet should be used where insulation may come incontact with PVC membrane if required by membranemanufacturer. Any material containing organicsolvents should not be used in direct contact withpolystyrene insulation unless previously evaluated.Protect from extended exposure of sunlight. Theproduct will ignite if exposed to fire of sufficient heatand intensity, although it does contain a flameretardant additive to inhibit ignition from small firesources.Polyisocyanurate HP, HP-H, HP-N, HP-W: ULClassified, FM Approved: Carlisle SynTec'sPolyisocyanurate products are non-structural, non-loadbearing materials. They are not designed for directtraffic usage unless adequately protected. All roofinsulation should be kept dry and protected from theelements. No more insulation should be installed thancan be covered in the same day. Isocyanurate foamwill burn if exposed to a flame of sufficient heat andintensity. Contact Carlisle SynTec for advice on theuse of these products if there is any doubt concerningthe proper product for the job, the proper installationprocedure or the proper code approvals.HP Recovery Board: UL classified, FM approved.HP Recovery Board is a wood fiberboard underlaymentfor use with Carlisle roofing systems. All roof insulationshould be kept dry and protected from the elements.No more insulation should be installed than can becovered in the same day. Wood fiberboard will burn ifexposed to a flame of sufficient heat and intensity.CARPENTER INSULATION COMPANYStyrodeck flat and tapered expanded polystyrene:Styrodeck is preferred for building roofs having normaltemperature conditions but should not be used incontact with chimneys, heater vents, steam pipes, orother surfaces where temperatures exceed 150 F. It isnot recommended for unballasted applications wheresustained roof temperatures exceed 165 F andintermittent temperatures exceed 180 F. Consult theroofing department at Carpenter Insulation Companybefore using EPS with coal tar pitch. ContactCarpenter Insulation for compliance with UL design "P"assemblies.CELOTEX CORPORATIONHy-Therm AP: UL Design Numbers: P225, P230,P232, P263, P508, P510, P514, P701, P710, P713,P717, P719, P720, P722, P723, P724, P727, P728,P729, P730, P732, P734, P735, P739, P801, P814,P815, P818, P819, P823, P827, P828. UL 1256 RoofDeck constructions: 99, 120 and 123. FM approvedFMRC Standard 4450/4470 for Class 1 Insulated SteelDeck Roofs.THE DOW CHEMICAL COMPANYBlue Styrofoam Brand Roofmate Insulation, BlueStyrofoam Brand Plazamate Insulation, Blue StyrofoamBrand Square Edge Insulation, Blue Styrofoam BrandTongue & Groove Insulation, Blue Styrofoam BrandRecovermate, Blue Styrofoam Brand DeckmateInsulation, Blue Styrofoam Brand Deckmate PlusInsulation, Styrofoam Brand Insulations: UL DesignNumbers: D2708, P225, P229, P230, P235, P248,P250, P251, P254, P255, P259, P261, P404, P505,P507, P508, P510, P513, P514, P701, P710, P711,P713, P714, P715, P717, P801, P803, P805, P811,P813, P814, P815, P817, P818, P902, P904, P907,P908, P909, P912, P915, P921, U326, U330, U460,U902, U912, P923. UL Roof Deck ConstructionNumbers: 1, 2, 3, 9, 14, 58, 87, 200, 237, 260, 276,380, 287, 440.Limitations and/or restrictions: Styrofoam Brand<strong>Roofing</strong> Material insulation is designed for use abovewaterproofing membranes in roof construction.Styrofoam Brand Plazamate and Styrofoam BrandHigh Load 100 insulations are designed for use abovewaterproofing membranes in plaza and parking roofdeck construction and in other areas where highcompressive strength insulation is required. Styrofoam-Brand <strong>Roofing</strong> Recovery Board, Styrofoam brandRecovermate, and Styrofoam Deckmate andDeckmate Plus insulations are intended for usebeneath loose-laid and ballasted or mechanicallyfastened sheet membranes in roof construction.Styrofoam brand insulations have poor resistance toaromatic hydrocarbons, chlorinated hydrocarbons,olefins, napthas, ketones, gasoline, fuel oil, and oilbasedpaint. Maximum service temperature: 165 F,except for Styrofoam brand Recovermate, which has amaximum service temperature of 200 F. Lightstability: When stored outdoors for extended periods,Styrofoam brand insulations should be shielded fromthe sunlight with an opaque, light-colored covering.Notice: Styrofoam brand insulation are combustibleand should be stored, handled, and used properly.They should be installed with code-acceptable thermalbarriers or used in approved alternative constructions.For more information, contact Dow (800-441-4DOW).362

FIRESTONE BUILDING PRODUCTS, INC.ISO 95+: FM Class 1, 1-60 or 1-90. Firestone roofinsulation products are non-structural, non-loadbearing materials. They are not designed for directtraffic usage unless adequately protected. All roofinsulation should be kept dry and protected from theelements. Asphalt mopping temperature must notexceed 450 F. No more insulation should be installedthan can be covered in the same day. Isocyanuratefoam will burn if exposed to a flame of sufficient heatand intensity. Contact Firestone for advice on the useof these products if there is any doubt concerning theproper product for the job, the proper installationprocedure or the proper code approvals. Code approvals:Classified in UL designs, P225, P230, P232, P259,P263, P508, P510, P514, P701, P710, P717, P718,P719, P722, P723, P724, P725, P727, P728, P729,P730, P732, P801, P814, P815, P818, P819, P823,P828; meets the requirements of ICBO Section 2602,SBCCI Section 2603, and BOCA Section 2603;Classified in UL deck construction 120 and 123.Composite Roof Insulation: UL Classification, FMClass 1, 1-60 or 1-90. Firestone's roof insulationproducts are non-structural, non-load bearingmaterials. They are not designed for direct trafficusage unless adequately protected. All roof insulationshould be kept dry and protected from the elements.Asphalt mopping temperature must not exceed 450 F.No more insulation should be installed than can becovered in the same day. Isocyanurate foam will burnif exposed to flame of sufficient heat and intensity.Contact Firestone for advice on the use of theseproducts if there is any doubt concerning the properproduct for the job, the proper installation procedure, orthe proper code approvals. Classified in UL designs,P225, P230, P232, P508, P510, P514, P701, P710,P717, P718, P719, P723, P801, P815, P818, P828;BOCA 2603; meets the requirements of ICBO Section2602, SBCCI Section 2603, and BOCA Section 2603;Classified in UL deck construction 120 and 123.GAF MATERIALS CORPORATIONGAFTEMP Permalite: UL Design Numbers: P001,P004, P201, P202, P203, P204, P206, P210, P211,P224, P225, P230, P232, P237, P238, P250, P254,P259, P263, P267, P404, P508, P514, P701, P708,P710, P713, P718, P801, P803, P805, P810, P814,P815, P817, P818, P819, P904, P909, P912, P915,S601, S702, S716, S717, S718.Limitations and Restrictions: GAFTEMPPermalite roof insulation should not be left exposed tothe weather. GAFTEMP Permalite insulation productsare not recommended for continuous use at temperaturesover 200 F. All insulation boards must bemaintained in a dry condition prior to installation. Forambient temperatures below 40 degrees F, the use ofhot bitumen application is not recommended due therapid cooling of the bitumen. Direct torching: GAFdoes not recommend that modified bitumen roofmembranes be directly torched to any insulation. Abase sheet should be applied to the surface of theinsulation and the torchable membrane torched to thebase sheet.GAFTEMP Isotherm: GAFTEMP Isotherm roofinsulation is a non-structural, non-loadbearing material.It is not designed for direct traffic usage unlessadequately protected. GAFTEMP Isotherm roofinsulation should be stored dry and protected from theelements. No more insulation should be installed thancan be completely covered with roofing on the sameday. As unprotected urethane will burn, fire safetyprecautions should be observed wherever anyisocyanurate products are used. GAFTEMP Isothermis an insulation board made up of composite matfacers bonded to a core of isocyanurate foam. ULDesign Numbers: P225, P230, P232, P259, P508,P510, P514, P710, P713, P715, P717, P718, P719,P720, P722, P723, P724, P727, P728, P729, P730,P732, P735, P738, P801, P815, P814, P818, P819,P823, 0827.Mechanical Fasteners: GAF recommends the use ofGAFTITE Coated or Stainless Steel mechanicalfasteners for the attachment of GAFTEMP roofinsulation products to steel decks. The correct numberand type, per the Factory Mutual Approval Guide,should be used. Limitations: The values listed hereinare typical, nominal values obtained under laboratoryconditions using industry-standard test methods.These values are subject to change at any time withoutnotice.GEORGIA-PACIFIC CORP.Georgia-Pacific cellulosic wood fiberboard insulation isproduced in 1/2", ¾” and 1" thick homogenous (nonlaminated)panels and are available in sizes 4 x 8, 4 x4 and, upon request, 2 x 4. High Density is producedin 1/2" and 1" thickness for adhered roof systems andRegular Density is produced in 1/2" for ballasted ormechanically fastened systems. High Density is FMapproved for adhered roof systems for I-60 and I-90wind uplift in FM report J.I. OV7A2.AM and is alsoavailable, upon request, UL classified.Compliances: ASTM C-208-1994, Grade 1(Regular Density) and Grand II (High Density). Itshould be noted that Georgia-Pacific High Density rooffiberboard insulation is produced under ASTM C-208-1994 (14# transverse strength), and not under ASTMC-208-1995 (12# transverse strength) which is363

important for adhered roof systems and wind upliftdesign.HUEBERT FIBERBOARD, CO.HFB Insulation Board: Contact Huebert Fiberboard,Co. for any information on limitations or restrictions.KOPPERS INDUSTRIES, INC.Refer to Koppers current literature for additionalproduct information, application instructions, andtechnical details. Contact Koppers Sales and ServiceCenter at 800-558-2706 for additional information andassistance.LUCAS SALES COMPANY, INC.Lucas Lite Tapered Extruded Polystyrene: Lucas Liteis practical for building roofs having normal rooftemperature conditions, but should not be used incontact with chimneys, heat vents, steam pipes, orother surfaces where temperatures exceed 150 F. It isnot recommended for unballasted applications wheresustained roof temperatures exceed 165 F. or intermittenttemperatures exceeding 180 F. Lucas Lite isrecommended for flat roofs only (less than 2:12 slope).Lucas Lite is not to be applied with plastic, oil, orsolvent-based roof cements. Lucas Lite will provideslope on flat roof decks. Deflected areas or low spotsshould be filled to provide a relatively level deck for thenew tapered system.The Lucas Tapered System: UL Design Numbers:P001, P004, P201, P202, P203, P204, P205, P206,P210, P211, P221, P224, P225, P230, P232, P233,P237, P238, P243, P252, P404. Building Codes:ICBO 3549, BOCA 8336, SBCCI 80108. Limitationsand/or restrictions: Lucas Tapered System is notstructural in nature; while highly moisture resistant, itshould not be left exposed to the elements. Therefore,no more insulation should be applied than can becompletely protected the same day. Lucas TaperedSystem is not designed for direct traffic unlessappropriately protected. Lucas Tapered System is notacceptable for applications where it shall be exposedto direct interface with continuous soakingtemperatures of 250 F. Lucas Tapered System willprovide slope on flat roof decks. Deflected areas orlow spots should be filled to provide a relatively leveldeck for new tapered roof insulation system. Whenapplying directly over metal decks, 3/4" thickness atlow points is recommended as a minimum. Check flutespan requirements for specific minimum thicknessrequirements.OWENS CORNING SPECIALTY & FOAMPRODUCTS<strong>General</strong>: Product should not be used in contact withchimneys, heater vents, steam pipes, or other surfaceswhere temperatures exceed 150 F. Product should beapplied to a substrate having an adequate fire rating asrequired by building codes, over metal or combustibledeck. Some Thermapink applications may be directlyover steel decking without the need for a thermalbarrier, such as, gypsum board. Durapink Plus or aseparator sheet should be used where insulation maycome in contact with PVC membrane if required bymembrane manufacturer. Any material containingorganic solvents should not be used in direct contactwith polystyrene insulation unless previously evaluated.Protect from extended exposure to sunlight. Productwill ignite if exposed to fire of sufficient heat andintensity, although it does contain a flame retardantadditive to inhibit ignition from small fire sources. Foradditional information, contact Owens Corning S&FPtechnical service (800) GET-PINK.364

Insulated Roof Deck; UL Roof Deck Constr. 200,219, 237, 289; UL Class A; See UL Fire Resistancedirectory for below membrane design numbers P225,P230, P251, P513, P701, P801, P803, P814, P815,P902, P922, P923.Foamular 404: UL Roof Deck Constr. 1, 2, 3, 9, 14,27, 58, 87, 200; UL Class A; FM Class I & 60 or 90PSF, Insulated Steel Roof Deck; UL Design Numbersfor inverted roof insulation: P225, P226, P229, P235,P248, P404, P505, P507, P701, P801, P803, P805,P811, P813, P902, P908, P909, P912, P915, P708.Thermapink 18/25/40/60: Thermapink products areused in all applications where the Foamular product ofsimilar compressive strength is used. Thermapink hasthe added advantage of being listed for use by UL inRoof Deck construction #457, applied directly oversteel roof decks without the use of a thermal barrier.<strong>Roofing</strong> assemblies that require timed fire resistanceor surface flame spread ratings may still require agypsum board layer. See the UL <strong>Roofing</strong> Materialsand Systems Directory for necessary details.Tapered Insulation: Tapered Termapink 25, 40, and60 are available for use in UL listed assemblies. Seethe appropriate listing directory for complete details.Foamular 404 RB/Foamular 604 RB: For use inprotected roof membrane assemblies and plaza deckswhen pavers are used as ballast or as a wearingsurface. These are high-compressive-strengthextruded polystyrene boards with drainage channelson the bottom four edges, as well as channels cut inthe top of the board to separate the paver from theinsulation.Foamular 400/Foamular 600: High-compressivestrengthproducts able to withstand heavy loadswithout damage to the panels or deterioration of theinsulating value.Durapink/Durapink FA, Durapink Plus: Speciallydesigned for use in reroofing applications, either totaltear-off or over existing BUR under single-plymechanically fastened black EPDM without the needfor any overlayment protection, ballast, or pavers and,in the case of Durapink Plus, directly under PVC.These products are not intended for use as a coverboard in new roof construction or over added insulationin reroofing. Durapink FA can be used directly underfully adhered single-ply membranes, including blackEPDM, by using water-based adhesives. Durapinkand Durapink Plus provide excellent moistureresistance properties and a 25-psi compressivestrength that endures foot traffic abuse and exposureto moisture; UL Class A and FM Class I-60 or 90recover systems available with a wide variety of singleplymembranes. Durpink Plus has an 18 psicompressive strength and excellent moistureresistance. See UCI guide specification for detailedinstructions.Insul-Drain: Designed to be installed on belowgradefoundation walls to the exterior side of thewaterproofing membrane, the product has a network ofprecision-cut channels covered with filter fabric toprovide drainage, protection, and insulation for thefoundation.PACEMAKER PLASTICS CO., INC.Expanded polystyrene roof insulation available flat ortapered in sheet sizes to 48-in. x 96-in. Productsmanufactured under quality control program are ULclassified and can be used in place of other roofinsulations in UL-classified assemblies. FactoryMutual listed products; 20-year, 100 percent R-valuewarranty; laminated products; and Dow taperedinsulation are also available.Chemfoam: Approvals: ASTM C-578-87a, ICBO4169, BOCA 8715, SBCCI 8735, UL R 12372, FM.UL P design numbers: P211, P225, P230, P232,P238, P246, P250, P251, P254, P261, P262, P410,P411, P508, P509, P510, P511, P514, P701, P710,P713, P715, P717, P803, P814, P815, P817, P818,P902, P909, P912, P915, P919, P920, P921, P922,P923, J999, K901, K902, K903.POLYFOAM PACKERS CORPORATIONThermoSafe EPS and EPS/Composite BoardInsulation: Available in sizes up to 192 inches long by48.5 inches wide by 1/2-in to 40 inches thick. Boardsbetween 2 and 8 inches thick are cut with 1/2-in. x 1/2-in. thickness shiplap edges on all sides as standard(ThermoLock) and at no additional charge. Boardswith square edges are available on request. Taperedboards (ThermoSafe DrainMaster), for slope-to-drainsystems are available with complete shop drawings.Both flat and tapered insulation boards are availablewith factory-laminated thermal barriers, facers, andcoverboards (ThermoSafe-Plus) on one or two sides.Approvals: ASTM C-578; CABO 236, 238, 384 and479; Factory Mutual file no. 0V8A0.AC, 0V8A1.AC,0V8A2.AC; UL classification file R14213: tested underUL 790, 1256, and modified full-scale, ASTM E-108,and ASTM E-84 for flame spread and smoke,developed for use as designated in the UL Fire ResistanceDirectory. UL Design numbers: P211, P225,P226, P230, P232, P235, P238, P254, P325, P404,P413, P508, P510, P514, P904, P909, P912, J925,J941, J970. UL Construction number 458, and WisconsinWisconsin DILHR number 960041-I.Quality Control: The ThermoSafe quality controlprogram and UL classification meet or exceedrequirements for building codes across the UnitedStates. ThermoSafe EPS roof insulation may be usedwith UL-approved (or equivalent) roof membrane365

systems and in place of other roof insulation in ULclassifiedassemblies.Installation: Follow guideline specifications incurrent ThermoSafe EPS roof insulation literature orcontact Polyfoam Packers Corp., 3751 Sunset Ave.,Waukegan, IL 60087; (800) 800-0359.Warranty: 20 year for 100 percent R-value retentionand dimensional stability when installed as specified.See current literature for details.R-MAX, INC.Thermaroof Plus: Uses: Designed for use undermechanically fastened or ballasted single-ply systemsonly over steel or non-combustible roof decks.Attachment: Use four FM-approved screw and platefasteners per 4' x 8' sheet under mechanically fastenedsingle-ply membranes. Consult membrane supplier foradditional fastening requirements. Restrictions: Not foruse under fully adhered single-plies, modified bitumen,or built-up roof membranes. Not to be used in exposedinsulation systems.Multi-Max: Uses: Designed for use undermechanically fastened or ballasted single-ply, built-uproof, or modified bitumen membranes. Consult Rmaxfor applications. Attachment: Use one FM-approvedscrew and plate mechanical fastener per three or foursquare feet of insulation under built-up roofmembranes. Use one FM-approved mechanicalfastener per two square feet of insulation undermodified bitumen systems.Multi-Max FA: Uses: Designed and suitable for useunder built-up roofs or modified bitumen membranesystems. May be overlaid with perlite, woodfiberboard, or other suitable overlay to obtainmembrane warranty from membrane manufacturer.Consult membrane manufacturer for requirements.Designed for use under all types of single-plymembranes: fully adhered, loose-laid and ballasted,and mechanically fastened. Attachment: Suitable forattachment with hot bitumens according to NRCAspecifications, or use FM-listed and approvedmechanical screw-and-plate fasteners at recommendeddensity according to Rmax, Inc.: typically, oneper four square feet for BUR or solid mopped-inoverlay. Use one per two square feet for fully adheredsingle-ply membranes.Thermaroof Composite: Uses: Designed for useunder built-up roof or modified bitumen membranes.May be used under single-ply membranes when perlitelayer specified over roof deck. May be applied to deckwith perlite layer up to receive torch applied modifiedbitumen or hot mopped built-up roof membrane.Attachment: Use one FM-approved screw and platemechanical fastener per three or four square feet ofinsulation under built-up roof membranes. Use oneFM-approved mechanical fastener per two square feetof insulation under modified bitumen systems.TEMPLEFiber Base HD: FM-approved roof insulation for I-60and I-90 wind uplift rated systems as outlined in FMreports J.I. 2M3A2.AM and J.I. 1T6A2.AM. Approvalunder these reports includes 25/32” Fiber Base HD,effective June 1, 1999. FM allows Fiber Base HDwherever generic wood fiber insulation is specified.Fiber Base HD is available by special order as ULclassifiedproduct for the built-up roof coveringmaterial. See R11115(N) under TGFU in UL BuildingMaterials directory for specific details. Consult theroofing membrane manufacturer and the current FMapproval guide for system compatibility and specificapplication instructions. Warning: Do not apply flamedirectly to Fiber Base HD. When applying modifiedbitumen membranes, a base sheet is required. FiberBase HD may smolder or burn. Extinguish completely ifignited. Refer to Fiber Base HD applicationinstructions for specific recommendations.Compliances: Industry Standard ANSI/AHA A 194.1and ASTM C208.TENNECO BUILDING PRODUCTSExtruded Polystyrene <strong>Roofing</strong> Recover Board (3/8-in.thickness): available as 4 ft. x 50 ft. fanfolded bundle(Amocor-PB6), 4 ft. x 8 ft. sheets (Amocor Plygood-PG38), or 4 ft. x 9 ft. sheets (Amocor Plygood-PG39).Extruded Polystyrene Insulation Board: Available asAmofoam-CM (square edge), or Amofoam-SL (sidelapedge), Amofoam-DC (drainage channels). Amofoamavailable as 2 ft. x 8 ft. and 4 ft. x 8 ft. sizes. R-valuesand C-value for Amofoam are for Type IV.Underwriters Laboratories, Inc. Roof deck constructionnumbers: Amofoam-CM, SL, 1, 2, 3, 9, 14, 58, 87, 200.366

Limitations and/or restrictions: Amocor-PB6,Amocor-Plygood-PG38, and Amocor Plygood-PG39<strong>Roofing</strong> Recovery Boards are designed for use inmechanically fastened or loose-laid and ballastedsingle-ply roofing systems. Amofoam <strong>Roofing</strong>Insulation Boards are designed for use in partially orfully adhered (1/2-in. wood fiberboard must be appliedprior to membrane application), mechanically fastenedor loose-laid and ballased, protected roof membraneassemblies, and tapered systems. All Amocor <strong>Roofing</strong>Recovery and Amofoam Insulation Boards have poorresistance to fuel oil, oil-based paint, olefins, ketones,gasoline, chlorinated and aromatic hydrocarbons, andnapthas. Although these products contain a flameretardant additive intended to inhibit a small sourcefire, they, like most commercially available foam plasticinsulations, are combustible and should not beexposed to flame or other ignition sources. Thesematerials may constitute a fire hazard if improperlyused. Fire and building codes should be followed.Specific information: Obtain installation instructionsfrom your supplier or Tenneco Building Products, 2907Log Cabin Drive, Smyrna, GA 30080-7013.367

THIS PAGE LEFT BLANK INTENTIONALLY368

Information on Section 3: Roof Fasteners<strong>General</strong> InformationSection 3: Roof Fasteners in the 2000 edition ofNRCA’s Low-Slope <strong>Roofing</strong> Materials Guide providesa comprehensive listing of fastener products used inlow-slope roofing. Such fasteners are typically usedto attach rigid board insulation and/or single-plymembranes to structural roof deck substrates.Information on roof fasteners is presented in theguide in four sections, based on the substrate intowhich fasteners will be attached. These four sectionsare as follows:• Steel decks• Wood decks• Concrete decks• Lightweight concrete, gypsum or cementitiouswood fiber decksAn index of the manufacturers included in Section 3:Roof Fasteners and locations of their specificproducts within this section immediately follows thisRoof Fasteners section.Roof Fastener Products: Steel DecksSpecific listing information on roof fastener productsused for steel roof decks is as follows:1. Company name2. Product name3. Country of manufacture4. Used with5. Material type6. Coating type7. Shank type8. Point type9. Method of attachment10. Diameter, length, fastening range,penetration11. Head shape12. Head dimensions13. Plates14. Plate shape, dimensions and material15. Installation equipment16. Average pullout resistance17. Meets FM approval requirements as acomponent of a Class I steel roof deck18. Passes FM 4470 for corrosion resistance19. Acceptable by the following codes20. Warranty available from manufacturerRoof Fastener Products: Wood DecksSpecific listing information on roof fastener productsused for wood roof decks is as follows:1. Company name2. Product name3713. Country of manufacture4. Used with5. Material type6. Coating type7. Shank type8. Point type9. Method of attachment10. Diameter, length, fastening range, penetration11. Head shape12. Head dimensions13. Plates14. Plate shape, dimensions and material15. Installation equipment16. Average pullout resistance17. Meets FM approval requirements as acomponent of a Class I wood roof deck18. Acceptable by the following codes19. Warranty available from manufacturerRoof Fastener Products: Concrete DecksSpecific listing information on roof fastener products usedfor concrete roof decks is as follows:1. Company name2. Product name3. Country of manufacture4. Used with5. Material type6. Coating type7. Shank type8. Point type9. Method of attachment10. Diameter, length, fastening range, penetration11. Head shape12. Head dimensions13. Plates14. Plate shape, dimensions and material15. Installation equipment16. Average pullout resistance17. Meets FM approval requirements as acomponent of a Class I concrete roof deck18. Acceptable by the following codes19. Warranty available from manufacturerRoof Fastener Products: LightweightConcrete, Gypsum or Cementitious WoodFiber DecksSpecific listing information on roof fastener products usedfor lightweight concrete, gypsum or cementitious woodfiber roof decks is as follows:1. Company name2. Product name3. Country of manufacture4. Deck type5. Used with6. Material type7. Coating type

8. Shank type9. Point type10. Method of attachment11. Diameter, length, fastening range,penetration12. Head shape13. Head dimensions14. Plates15. Plate shape, dimensions and material16. Installation equipment17. Average pullout resistance18. Acceptable by the following codes19. Warranty available from manufacturerAdditional InformationUsers of the guide who are interested in additionalinformation regarding roof fasteners are encouragedto refer to The NRCA <strong>Roofing</strong> and WaterproofingManual, Fourth Edition.372

<strong>Index</strong> to Roof FastenersLTWT CONCRETE, GYPSUM, ORWOOD FIBER DECKSLTWT CONCRETE, GYPSUM, ORWOOD FIBER DECKSCONCRETE DECKSCONCRETE DECKSWOOD DECKSSTEEL DECKSWOOD DECKSSTEEL DECKSBMCA INSULATION PRODUCTS INC. 376 HILTI INC. 385 410 439 462300 N. Haven Avenue P.O. Box 21148Ontario, CA 91761 Tulsa, OK 74121800/858-8868 800/879-8000FAX 909/390-8764 FAX 918/252-6988E-mail:E-mail: ushilti.comWeb:WebLCARLISLE SYNTEC INCORPORATED 376 402 434 452 ITW BUILDEX 386 411 441 4631285 Ritner Hwy. 1349 W. Bryn Mawr Ave.P.O. Box 7000 Itasca, IL 60143Carlisle, PA 17013 800/284-5339 630/595-3500717/245-7000 FAX 630/595-6329FAX 717/245-7053E-mail:E-mail:Web:Web: JOHNS MANVILLE INTERNATIONAL INC. 389 414 443 464CELOTEX CORP. 378 403 435 454 <strong>Roofing</strong> Systems Group4010 Boy Scout Blvd. P.O. Box 5108Tampa, FL 33607 Denver, CO 80217813/873-4000 303/978-2000FAX: FAX 303/978-3904E-mail:E-mail:Web:Web:CONSTRUCTION FASTENERS INC. 379 405 436 454 NATIONAL NAIL CORP. 415 443DEKFAST PRODUCT GROUP2964 Clydon SWSpring & Van Reed Box 6326 Grand Rapids, MI 49509Wyomissing, PA 19610 800/746-5659610/376-5751 FAX 616/531-5970FAX 610/376-8551E-mail:E-mail:Web:Web:DURO-LAST INC. 381 407 437 OLYMPIC MANUFACTURING GROUP INC. 391 417 443 465525 Morley Drive P.O. Box 508Saginaw, MI 48601153 Bowles Road800/248-0280 Agawam, MA 01001FAX 800/432-9331 800/633-3800 or 413/789-0252E-mail: FAX 413/789-1069Web:E-mail: info@olyfast.comES PRODUCTS INC. 407 455 POWERS RAWL, POWERS FASTENERS, INC.393 418 445 467280 Franklin Street P.O. Box 810 New Rochelle, NY 10801Bristol, RI 02809 914/235-6300401/253-8600 FAX 914/576-6483FAX 401/253-8896E-mail:E-mail:Web: www.powers.comWeb:FIRESTONE BUILDING PRODUCTS 381 407 437 459 SENCO PRODUCTS 420525 Congressional Blvd. 8485 Broadwell RoadCarmel, IN 46032 Cincinnati, OH 45244800/428-4442 800/543-4596FAX 317/575-7100 FAX 800/543-3299E-mail:E-mail:Web:Web: www.senco.comGAF MATERIALS CORP. 382 408 438 460 SFS STADLER INC. 394 421 446 4681361 Alps Road 5460 Wegman DriveWayne, NJ 07470 Valley City, OH 44280973/628-3000 330/273-7171 or 800/648-6032FAX 973/628-3356 FAX 330/273-7181E-mail:E-mail:Web:Web:373

<strong>Index</strong> to Roof FastenersLTWT CONCRETE, GYPSUM, ORWOOD FIBER DECKSLTWT CONCRETE, GYPSUM, ORWOOD FIBER DECKSCONCRETE DECKSCONCRETE DECKSWOOD DECKSSTEEL DECKSWOOD DECKSSTEEL DECKSSIMPLEX NAILS & FASTENERS, INC. 424 448 469 TRU-FAST CORPORATION 399 431 449 471100 Petty Road, Suite A 02105 Williams County Road 12-CLawrenceville, GA 30043-4813 Bryan, OH 43506800/622-3354 800/443-9804FAX 770/822-6822 FAX 419/636-1784E- Mail: technical@www.simplexnails.com E-mail: tru-fast@bright.netWeb:Web Site: trufast.comTRI-PLY 399 449 471 U.S. INTEC, INC. 401 433 451 472P.O. Box 26851361 Alps RoadPort Arthur, TX 77643 Wayne, NJ 07470800/331-3007 800/624-6832 (Tech Hotline)FAX: 409/727-0771 800/231-4631E-mail:FAX:374

THIS PAGE LEFT BLANK INTENTIONALLY

Roof Fasteners: Steel Decks1. COMPANY NAME BMCA INSULATION PRODUCTS INC. CARLISLE SYNTEC INCORPORATED2. PRODUCT NAME LEXSUCO INSULATION CLIP HP FASTENER3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED STEEL CARBON STEEL6. COATING TYPE PROPRIETARY EPOXY ELECTRODEPOSITION7. SHANK TYPE MULTI-HOOK SINGLE LEAD, BUTTRESS THREAD8. POINT TYPE HARDENED PIERCING MINI-DRILL POINT9. METHOD OF ATTACHMENT MECHANICAL LOCKING TONGUES THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)NA 2-3/8 1-3/8 15/16 0.180 1-1/4 1/2 3/4NA 3-5/8 2-5/8 15/16 0.180 1-3/4 1 3/4NA 4-5/8 3-5/8 15/16 O.180 2-1/4 1-1/2 3/40.180 2-3/4 2 3/40.180 3-1/4 2-1/2 3/40.180 3-3/4 3 3/40.180 4-1/4 3-1/2 3/40.180 5 4-1/4 3/40.180 6 5-1/4 3/40.180 7 6-1/4 3/40.180 8 7-1/4 3/40.180 9 8-1/4 3/40.180 10 9-1/4 3/40.180 11 10-1/4 3/40.180 12 11-1/4 3/40.180 13 12-1/4 3/40.180 14 13-1/4 3/40.180 15 14-1/4 3/411. HEAD SHAPE FLAT RECTANGLE WAFER12. HEAD DIMENSIONS (inches)Thickness 0.105Diameter 1.00 X 0.6875 0.4313. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3-1/8 STEEL SQUARE 2-7/8 GALVALUME(w/rounded corners)ROUND 2 GALVALUMELOCKING 2 GALVALUME W/PLASROUND 2 PLASTICROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)RUBBER MALLET (REQUIRED)OtherAUTOMATIC FASTENING TOOL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge20 Gauge22 Gauge 32517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) NO YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no NO YES19. ACCEPTED BY THE FOLLOWING CODES UL FM20. MANUFACTURER WARRANTY AVAILABLE (yes/no) NO YES21. SEE APPENDIX IF CHECKED XNA = not applicable376

Roof Fasteners: Steel DecksCARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATEDHP PURLIN FASTENER HP-X FASTENER SURE FAST FASTENERSU.S. U.S. U.S.XXXXCARBON STEEL CARBON STEEL CARBON STEELEPOXY ELECTRODEPOSITION EPOXY ELECTRODEPOSITION EPOXY ELECTRODEPOSITIONSINGLE LEAD "V" THREAD SINGLE LEAD, BUTTRESS THREAD SINGLE LEAD, BUTTRESS THREADDRILL POINT MINI-DRILL POINT DRILL POINTTHREADED THREADED THREADED0.160 3 2 1 -- 2 1-1/4 3/4 0.160 2-1/4 1-1/2 3/40.160 4 3 1 -- 3 2-1/4 3/4 0.160 2-7/8 2-1/8 3/40.160 5 4 1 -- 4 3-1/4 3/4 0.160 3-1/4 2-1/2 3/40.160 6 5 1 -- 5 4-1/4 3/4 0.160 3-3/4 3 3/40.160 7 6 1 -- 7 5-1/4 3/4 0.160 4-1/2 3-3/4 3/4-- 7 6-1/4 3/4 0.160 5 4-1/4 3/4-- 8 7-1/4 3/4 0.160 6 5-1/4 3/4-- 10 9-1/4 3/4 0.160 7 6-1/4 3/4-- 12 11-1/4 3/4 0.160 8 7-1/4 3/4-- 14 13-1/4 3/4HEX TRUSS #3 PHILLIPS TRUSS #3 PHILLIPS0.140 0.115 0.1000.430 0.435 0.425YES YES YESYES YES YESLOCKING 2 GALVALUME W/PLAS ROUND 2-3/8 CARBON STEEL ROUND 3 GALVALUMEROUND 2 PLASTICREQUIRED REQUIRED REQUIREDAUTOMATIC FASTENING TOOLNO YES YESYESYESFMFMYES YES YES377

Roof Fasteners: Steel Decks1. COMPANY NAME CELOTEX CORPORATOIN CELOTEX CORPORATOIN2. PRODUCT NAME ANCHORBOND #12 ANCHORBOND #143. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED STEEL HARDENED CARBON STEEL6. COATING TYPE ORGANIC FLOUROPOLYMERS ORGANIC FLUOROPOLYMERS7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE SELF-DRILLING SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)O.222 1-5/8 1-1/4 3/8 0.238 1-1/4 7/8 3/80.222 2-1/4 1-7/8 3/8 0.238 1-5/8 1-1/4 3/80.222 2-7/8 2-1/2 3/8 0.238 1-7/8 1-7/8 3/80.222 3-3/4 3-3/8 3/8 0.238 2-7/8 2-1/2 3/80.222 4-1/4 4-1/8 3/8 0.238 3-1/4 3-3/8 3/80.222 5 4-5/8 3/8 0.238 4-1/2 4-1/8 3/80.238 5 4-5/8 3/80.238 6 5-5/8 3/80.238 7 6-5/8 3/80.238 8 7-5/8 3/811. HEAD SHAPE #3 PHILLIPS FLAT TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.109 0.109Diameter 0.438 0.43813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 STAINLESS STEELHEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 3 PLASTICHEXAGONL 2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 637 72120 Gauge 551 63922 Gauge 430 50717. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM FM, UL20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKED XNA = not applicable378

Roof Fasteners: Steel DecksCELOTEX CORPORATION CELOTEX CORPORATION CONSTRUCTION FASTENERS, INC.ANCHORBOND #15 HEAVY DUTY ANCHORBOND #14 STAINLESS STEEEL DEKFAST #12U.S. U.S. U.S.X X XX X XX X XHARDENED CARBON STEEL STAINLESS STEEEL (#304) HARDENED CARBON STEELORGANIC FLUOROPOLYMERS ORGANIC FLUOROPOLYMERS ORGANICSPIRAL THREAD SPIRAL THREAD SPIRAL THREADSELF-DRILLING SELF-DRILLING SELF-DRILLINGTHREADED THREADED THREADED0.264 1-1/4 3/4 1/2 0.264 3 2 1 0.222 1-5/8 7/8 3/40.264 2 1-1/2 1/2 0.264 4 3 1 0.222 2-1/4 1-1/2 3/40.264 3 2-1/2 1/2 0.264 5 4 1 0.222 2-7/8 2-1/8 3/40.264 4 3-1/2 1/2 0.264 6 5 1 0.222 3-1/4 2-1/2 3/40.264 5 4-1/2 1/2 0.264 7 6 1 0.222 3-3/4 3 3/40.264 6 5-1/2 1/2 0.264 8 7 1 0.222 4-1/2 3-3/4 3/40.264 7 6-1/2 1/2 0.222 5 4-1/4 3/40.264 8 7-1/2 1/2 0.222 6 5-1/4 3/40.264 10 9-1/2 1/2 0.222 7 6-1/4 3/40.264 12 11-1/2 1/2 0.222 8 7-1/4 3/40.264 14 13-1/2 1/20.264 16 15-1/2 1/2#3 PHILLIPS TRUSS #3 PHILLIPS TRUSS #3 PHILLIPS TRUSS & 1/4" HEX WASHER HEAD0.109 0.109 0.109 0.1900.438 0.438 0.438 0.438YES YES YESYES YES YESHEXAGONAL 2-7/8 STAINLESS STEEL HEXAGONAL 2-7/8 STAINLESS STEEL HEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 RECESS GALVLMHEXAGONL 2 GALVALUME HEXAGONAL 3 PLASTIC HEXAGONAL 3 PLASTICHEXAGONL 2 GALVALUME ROUND 2 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL735 790 756689 5550 561493 457 445YES YES YESYES YES YESFM FM FM, METRO-DATE COUNTYYES YES YESX379

Roof Fasteners: Steel Decks1. COMPANY NAME CONSTRUCTION FASTENERS INC. CONSTRUCTION FASTENERS, INC.2. PRODUCT NAME DEKFAST #14 DEKFAST #15 HI-STRENGTH3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE ORGANIC ORGANIC7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE SELF-DRILLING SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.238 1-1/4 1/2 3/4 0.264 1-1/4 1/2 3/40.238 1-5/8 7/8 3/4 0.264 2 1-1/4 3/40.238 2-1/4 1-1/2 3/4 0.264 3 2-1/4 3/40.238 2-7/8 2-1/8 3/4 0.264 4 3-1/4 3/40.238 3-1/4 2-1/2 3/4 0.264 5 4-1/4 3/40.238 3-3/4 3 3/4 0.264 6 5-1/4 3/40.238 4-1/2 3-3/4 3/4 0.264 7 6-1/4 3/40.238 5 4-1/4 3/4 0.264 8 7-1/4 3/40.238 6 5-1/4 3/4 0.264 10 9-1/4 3/40.238 7 6-1/4 3/4 0.264 12 11-1/4 3/40.238 8 7-1/4 3/4 0.264 14 13-1/4 3/40.238 10 9-1/4 3/4 0.264 16 15-1/4 3/40.238 12 11-1/4 3/4 0.264 18 17-1/4 3/40.264 20 19-1/4 3/40.264 22 21-1/4 3/40.264 24 23-1/4 3/40.264 26 25-1/4 3/411. HEAD SHAPE #3 PHILLIPS FLAT TRUSS #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.109 0.118Diameter 0.438 0.43813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 3 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME ROUND 2-1/2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 900 114020 Gauge 749 89822 Gauge 600 72517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicable380

Roof Fasteners: Steel DecksCONSTRUCTION FASTENERS, INC. DURO LAST INC. FIRESTONE BUILDING PRODUCTS#14 DEKFAST STAINLESS STEEL DURO LAST SCREWS #14 FIRESTONE ALL PURPOSEU.S. U.S. U.S.X X XXX X XSTAINLESS STEEL (TRIMRITE) STEEL SAE 1022, HEAT TREATEDNONE CLUOROCARBON EPOXYSPIRAL THREAD SPIRAL THREAD SPIRAL THREADEDSELF-DRILLING SELF-DRILLING DRILL POINTTHREADED THREADED THREADED0.235 1-1/2 3/4 3/4 0.190 1-3/4 1 3/4 0.235 1-1/4 1/2 3/40.235 2 1-1/4 3/4 0.190 2 1-1/4 3/4 0.235 1-5/8 7/8 3/40.235 3 2-1/4 3/4 0.190 2-1/2 1-3/4 3/4 0.235 2-1/4 1-1/2 3/40.235 4 3-1/4 3/4 0.190 3 2-1/4 3/4 0.235 2-7/8 2-1/8 3/40.235 5 4-1/4 3/4 0.190 3-1/2 2-3/4 3/4 0.235 3-1/4 2-1/2 3/40.235 6 5-1/4 3/4 0.190 4 3-1/4 3/4 0.235 3-3/4 3 3/40.235 7 6-1/4 3/4 0.190 4-1/2 3-3/4 3/4 0.235 4-1/2 3-3/4 3/40.235 8 7-1/4 3/4 0.190 5 4-1/4 3/4 0.238 5 4-1/4 3/40.235 10 9-1/4 3/4 0.190 5-1/2 4-3/4 3/4 0.235 6 5-1/4 3/40.235 12 11-1/4 3/4 0.190 6 5-1/4 3/4 0.235 7 6-1/4 3/40.190 7 6-1/4 3/4 0.235 8 7-1/4 3/40.190 8 7-1/4 3/40.190 9 8-1/4 3/40.190 10 9-1/4 3/40.190 11 10-1/4 3/40.190 12 11-1/4 3/4#3 PHILLIPS TRUSS TRUSS ROUND MUSHROOM #3 PHILLIPS0.118 0.103 0.1100.440 0.438 0.437YES YES YESYES YES YESROUND 2 GALVALUME ROUND 2 POLYCARBONATE HEX (insulation) 2-7/8 GALVALUMEROUND 3 GALVALUME ROUND (in-seam) 2 GALVALUMEROUND (in-seam) 2-3/8 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL830 900656 517 650472 450YES YES YESYES YES YESFM, METRO-DADE COUNTY FM, ICBO, BOCA, SBCCI FM, ICBO, UL, SBCCIYES YES YES381

Roof Fasteners: Steel Decks1. COMPANY NAME FIRESTONE BUILDING PRODUCTS GAF MATERIALS CORPORATION2. PRODUCT NAME FIRESTONE HEAVY DUTY GAFTITE #12-11/EVERGUARD EGIN3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE SAE 1022, HEAT TREATED STAINLESS, SPECIAL, 400-SERIES BLEND6. COATING TYPE EPOXY CR-10 FLUOROCARON7. SHANK TYPE BUTTRESS THREAD THREADED8. POINT TYPE DRILL POINT PINCH, SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.264 1-1/4 1/2 3/4 0.172 1-5/8 1-3/8 1/20.264 2 1-1/4 3/4 0.172 2-1/4 1-3/4 1/20.264 3 2-1/4 3/4 0.172 2-1/8 2-3/8 1/20.264 4 3-1/4 3/4 0.172 3-1/4 2-3/4 1/20.264 5 4-1/4 3/4 0.172 4-1/2 4 1/20.264 6 5-1/4 3/4 0.172 5 4-1/2 1/20.264 7 6-1/4 3/4 0.172 6 5-1/2 1/20.264 8 7-1/4 3/4 0.172 7 6-1/2 1/20.264 10 9-1/4 3/4 0.172 8 7-1/2 1/20.264 12 11-1/4 3/40.264 14 13-1/4 3/411. HEAD SHAPE ROUND MUSHROOM #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.110 0.110Diameter 0.437 0.43513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEX (insulation) 2-7/8 GALVALUME ROUND 2 STAINLESS STEELROUND (in-seam) 2 GALVALUME ROUND 3 STAINLESS STEELROUND (in-seam) 2-3/8 GALVALUME ROUND 2 STEELROUND 2 PLASTICROUND 3 STEELROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 950 54020 Gauge 730 50122 Gauge 690 45617. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, ICBO, UL, SBCCI FM, UL, ICBO, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicable382

Roof Fasteners: Steel DecksGAF MATERIALS CORPORATION GAF MATERIALS CORPORATION GAF MATERIALS CORPORATIONGAFTITE #14-10/EVERGUARD EGHD GAFTITE #12-11/EVERGUARD EGIN GAFTITE #14-10/EVERGUARD EGHDU.S. U.S. U.S.X X XX X XX X XHARDENED CARBON STEEL HARDENED CARBON STEEL STAINLESS STEEL, SPECIAL 400-SERIES BLENDCR-1O FLUOROCARBON CR-10 FLUOROCARBON CR-10-FLUOROCARBONTHREADED THREADED THREADEDPINCH, SELF-DRILLILNG OR TAPEX PINCH, SELF-DRILLING, GIMLET, OR TAPEX PINCH, SELF-DRILLINGTHREADED THREADED THREADED0.190 1-1/4 3/4 1/2 0.160 1-5/8 1-1/8 1/2 0.201 1-1/4 3/4 1/20.190 1-3/4 1-1/4 1/2 0.160 2-1/4 1-3/4 1/2 0.201 1-3/4 1-1/4 1/20.190 2 1-1/2 1/2 0.160 2-7/8 2-3/8 1/2 0.201 2 1-1/2 1/20.190 3 2-1/2 1/2 0.160 3-1/4 2-3/4 1/2 0.201 3 2-1/2 1/20.190 4 3-1/2 1/2 0.160 4-1/2 4 1/2 0.201 4 3-1/2 1/20.190 5 4-1/2 1/2 0.160 5 4-1/2 1/2 0.201 5 4-1/2 1/20.190 6 5-1/2 1/2 0.160 6 5-1/2 1/2 0.201 6 5-1/2 1/20.190 7 6-1/2 1/2 0.160 8 7-1/2 1/2 0.201 7 6-1/2 1/20.190 8 7-1/2 1/2 0.201 8 7-1/2 1/20.190 9 8-1/2 1/2 0.201 9 8-1/2 1/20.190 10 9-1/2 1/2 0.201 10 9-1/2 1/20.190 11 10-1/2 1/2 0.201 12 11-1/2 1/20.190 12 11-1/2 1/2 0.201 14 13-1/2 1/20.190 14 13-1/2 1/2 0.201 16 15-1/2 1/20.190 16 15-1/2 1/2 0.201 18 17-1/2 1/20.190 18 17-1/2 1/2 0.201 20 19-1/2 1/20.190 20 19-1/2 1/2 0.201 21 20-1/2 1/20.190 21 20-1/2 1/2 0.201 22 21-1/2 1/20.190 22 21-1/2 1/2 0.201 24 23-1/2 1/20.190 24 23-1/2 1/2ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS0.110 0.110 0.1080.435 0.435 0.435YES YES YESYES YES YESROUND 2 STEEL ROUND 2 STEEL ROUND 2 STAINLESS STEELROUND 2 PLASTIC ROUND 2 PLASTIC ROUND 3 STAINLESS STEELROUND 3 STEEL ROUND 3 STEEL ROUND 2 STAINLESSROUND 3 PLASTIC ROUND 2 STAINLESS STEEL ROUND 2 PLASTICROUND 2 STAINLESS STEEL ROUND 3 STAINLESS STEEL ROUND 3 STAINLESSROUND 3 STAINLESS STEEL ROUND 3 PLASTIC ROUND 3 PLASTICREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL585 540 585535 501 535505 436 505YES YES YESYES YES YESFM, UL, ICBO, METRO-DADE COUNTY FM, U, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTYYESYES383

Roof Fasteners: Steel Decks1. COMPANY NAME GAF MATERIALS CORPORATION GAF MATERIALS CORP/N.T.B. FASTENING SYSTEM2. PRODUCT NAME EVERGUARD EGX N-C3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL NYLON6. COATING TYPE CR-10 FLUOROCARBON NA7. SHANK TYPE THREADED SPIRAL THREAD8. POINT TYPE DOUBLE-EDGE DRILL9. METHOD OF ATTACHMENT THREADED THREADED, SPIN WELD10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.201 2 1-1/4 1/4 0.250 4 3-3/4 1/20.201 3 2-1/4 1/4 0.250 6 5-3/4 1/20.201 4 3-1/4 1/4 0.250 8 7-3/4 1/20.201 5 4-1/4 1/4 0.250 10 9-3/4 1/20.201 6 5-1/4 1/4 0.250 12 11-3/4 1/20.201 7 6-1/4 1/40.201 8 7-1/4 1/40.201 10 9-1/4 1/40.201 12 11-1/4 1/40.201 14 13-1/4 1/40.201 16 15-1/4 1/411. HEAD SHAPE ROUND TRUSS, #3 PHILLIPS DOUBLE HEX12. HEAD DIMENSIONS (inches)Thickness 0.110 0.100Diameter 0.435 1.013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2-3/8 STEEL ROUND W/SPIKES 2 NYLONROUND W/SPIKES 3 CARBON STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 1114 500+20 Gauge 937 500+22 Gauge 718 500+17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES NA19. ACCEPTED BY THE FOLLOWING CODES FM, UL FM20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicable384

Roof Fasteners: Steel DecksHILTI, INC. HILTI INC. HILTI INC.HILTI FASTENERS #12 HILTI FASTENERS #12 S.S. HILTI FASTNERS #10U.S. U.S. U.S.X X XX X XX X XCARBON STEEL C-1022 STAINLESS STEEL (TRIMRITE ALLOY #S42010) CARBON STEEL C-1022TRU-KOTE PC-3 (FLUOROCARBON PAINT)TRU-KOTE PC-3 (FLUOROCARBON PAINT)THREADED THREADED THREADEDDOUBLE FLUTE SELF-DRILLING SELF-DRILLING GIMLETTHREADED THREADED THREADED0.160 1-5/8 1-1/8 1/2 0.160 1-5/8 1-1/8 1/2 0.150 1-5/8 1-1/8 1/20.160 2-1/4 1-3/4 1/2 0.160 2-1/4 1-3/4 1/2 0.150 2-1/4 1-3/4 1/20.160 2-7/8 2-3/8 1/2 0.160 2-7/8 2-3/8 1/2 0.150 2-7/8 2-3/8 1/20.160 3-1/4 2-3/4 1/2 0.160 3-3/4 3-1/2 1/2 0.150 3-3/4 3-1/2 1/20.160 3-3/4 3-1/2 1/2 0.160 4-1/2 4 1/2 0.150 4-1/2 4 1/20.160 4-1/2 4 1/2 0.160 5 4-1/2 1/2 0.150 5 4-1/2 1/20.160 5 4-1/2 1/2 0.160 6 5-1/2 1/2 0.150 6 5-1/2 1/20.160 6 5-1/2 1/2 0.160 7 6-1/2 1/2 0.150 7 6-1/2 1/20.160 7 6-1/2 1/2 0.160 8 7-1/2 1/2 0.150 8 7-1/2 1/20.160 8 7-1/2 1/2 0.160 10 9-1/2 1/2 0.150 10 9-1/2 1/20.160 10 9-1/2 1/2 0.160 12 11-1/2 1/2 0.150 12 11-1/2 1/20.160 12 11-1/2 1/2TRUSS #3 PHILLIPS, 1/4 HEX WASHER TRUSS #3 PHILLIPS #10 TRUSS, PHILLIPS #30.105 0.105 0.1100.440 0.440 0.390YES YES YESYES YES YESROUND 2 GALVALUME ROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 3 PLASTICREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL558 720456 620 610452 473 494YES YES YESYES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YES385

Roof Fasteners: Steel Decks1. COMPANY NAME HILTI INC. ITW BUILDEX2. PRODUCT NAME HILTI FASTENERS #14 HEXTRA3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL C-1022 HARDENED CARBON STEEL6. COATING TYPE TRU-KOTE PC-3 (FLUOROCARBON PAINT) CLIMASEAL OR SPEX7. SHANK TYPE THREADED MODIFIED BUTTRESS THREAD8. POINT TYPE DOUBLE FLUTE SELF-DRILLING X-POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.180 1-1/2 1 1/2 0.215 1-5/8 7/8 3/40.180 2 1-1/2 1/2 0.215 2-1/4 1-1/2 3/40.180 3 2-1/2 1/2 0.215 2-7/8 2-1/8 3/40.180 4 3-1/2 1/2 0.215 3-1/4 2-1/2 3/40.180 5 4-1/2 1/2 0.215 3-3/4 3 3/40.180 6 5-1/2 1/2 0.215 4-3/8 3-5/8 3/40.180 7 6-1/2 1/2 0.215 5 4-1/4 3/40.180 8 7-1/2 1/2 0.215 6 5-1/4 3/40.180 10 9-1/2 1/2 0.215 6 5-1/4 3/40.180 12 11-1/2 1/2 0.215 7 6-1/4 3/40.215 8 7-1/4 3/411. HEAD SHAPE #10 TRUSS, PHILLIPS #3 1/4-IN. HEX HEAD12. HEAD DIMENSIONS (inches)Thickness 0.105 0.180Diameter 0.440 0.39213. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME SQUARE 3 X 3 GALVALUMEROUND 3 GALVALUME GEARLOCK 3 POLYOLEFINROUND 3 PLASTIC ROUND 2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)OPTIONALSpecial Tool Needed (optional/required)ACCUDRIVE XL PLUS (OPTIONAL)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 850 89420 Gauge 656 56522 Gauge 472 48817. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicable386

Roof Fasteners: Steel DecksITW BUILDEX ITW BUILDEX ITW BUILDEXROOF GRIP ROOF GRIP PLUS ACCUTRAC FASTENERU.S. U.S. U.S.X X XXXHARDENED CARBON STEEL CARBON STEEL HARDENED CARBON STEELSPEX CLIMASEAL SPEX OR CLIMASEALMODIFIED BUTTRESS THREAD MODIFIED BUTTRESS THREAD MODIFIED BUTTRESS THREADX-POINT X-POINT X-POINTTHREADED THREADED THREADED0.215 1-5/8 7/8 3/4 0.215 2-1/4 1-1/2 3/4 0.215 1-5/8 7/8 3/40.215 2-1/4 1-1/2 3/4 0.215 2-7/8 2-1/8 3/4 0.215 2-1/4 1-1/2 3/40.215 2-7/8 2-1/8 3/4 0.215 3-1/4 2-1/2 3/4 0.215 2-7/8 2-1/8 3/40.215 3-1/4 2-1/2 3/4 0.215 3-3/4 3 3/4 0.215 3-1/4 2-1/2 3/40.215 3-3/4 3 3/4 0.215 4-3/8 3-5/8 3/4 0.215 3-3/4 3 3/40.215 4-3/8 3-5/8 3/4 0.215 5 4-1/4 3/4 0.215 4-3/8 3-5/8 3/40.215 5 4-1/4 3/4 0.215 6 5-1/4 3/4 0.215 5 4-1/4 3/40.215 6 5-1/4 3/4 0.215 7 6-1/4 3/4 0.215 6 5-1/4 3/40.215 6 5-1/4 3/4 0.215 8 7-1/4 3/40.215 7 6-1/4 3/40.215 8 7-1/4 3/4#3 PHILLIPS PAN-HEAD #3 PHILLIPS PAN HEAD 1/4-IN. HEX HEAD OR #3 PHILLIPS PAN HEAD0.118 0.180 0.1800.448 0.392 0.392YES YES YESYES YES YESSQUARE 3 X 3 GALVALUME ROUND 3 GALVALUME SQUARE 3 X 3 GALVALUMEGEARLOCK 3 POLYOLEFINROUND 2 GALVALUMEREQUIREDREQUIREDACCUDRIVE XL PLUS (OPTIONAL) ACCUFAST STAND-UP TOOL (OPTIONAL) ACCUTRAC I, II, OR III (REQUIRED)894 894 894656 656 656488 488 488YES YES YESYES YES YESFM, METRO-DADE COUNTY FM FM, METRO-DADE COUNTYYES YES YESXX387

Roof Fasteners: Steel Decks1. COMPANY NAME ITW BUILDEX ITW BUILDEX2. PRODUCT NAME #14 ROOF GRIP #15 ROOF GRIP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE CLIMASEAL CLIMASEAL7. SHANK TYPE MODIFIED STANDARD THREAD STANDARD THREAD8. POINT TYPE X-POINT DRILL POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.252 1-1/2 3/4 3/4 0.260 1-1/4 1/2 3/40.252 2 1-1/4 3/4 0.260 2 1-1/4 3/40.252 3 2-1/4 3/4 0.260 3 1-3/4 3/40.252 4 3-1/4 3/4 0.260 4 3-1/4 3/40.252 5 4-1/4 3/4 0.260 5 4-1/4 3/40.252 6 5-1/4 3/4 0.260 6 5-1/4 3/40.252 7 6-1/4 3/4 0.260 7 6-1/4 3/40.252 8 7-1/4 3/4 0.260 8 7-1/4 3/40.260 10 9-1/4 3/40.260 12 11-1/4 3/40.260 14 13-1/4 3/40.260 16 15-1/4 3/411. HEAD SHAPE #3 PHILLIPS PAN HEAD #3 PHILLIPS PAN HEAD12. HEAD DIMENSIONS (inches)Thickness 0.118 0.118Diameter 0.448 0.44813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME ROUND 2 GALVALUMESQUARE 3 GALVALUME SQUARE 3 GALVALUMEROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)ACCUDRIVE XL PLUS (OPTIONAL)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 97120 Gauge 68622 Gauge 56017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no)YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/noYES19. ACCEPTED BY THE FOLLOWING CODES FM20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES21. SEE APPENDIX IF CHECKEDNA = not applicable388

Roof Fasteners: Steel DecksITW BUILDEX JOHNS MANVILLE INTERNATIONAL, INC. JOHNS MANVILLE INTERNATIONAL, INC.HEXTRA PLUS ULTRAFEST/HEX HEAD ULTRAGRIP/PHILLIPS HEAD #12U.S. U.S. U.S.X X XCARBON STEEL HARDENED CARBON STEEL HARDENED CARBON STEELCLIMASEAL CLIMASEAL SPEXMODIFIED BUTRESS THREAD MODIFIED BUTTRESS THREAD MODIFIED BUTTRESS THREADX-POINT SELF-DRILLING X-POINT SELF-DRILLING X-POINTTHREADED THREADED THREADED0.215 2-1/4 1-1/2 3/4 0.215 1-5/8 1-1/8 1/2 0.215 1-5/8 1-1/8 1/20.215 2-7/8 2-1/8 3/4 0.215 2-1/4 1-3/4 1/2 0.215 2-1/4 1-3/4 1/20.215 3-1/4 2-1/2 3/4 0.215 2-7/8 2-3/8 1/2 0.215 2-7/8 2-3/8 1/20.215 3-3/4 3 3/4 0.215 3-1/4 2-3/4 1/2 0.215 3-1/4 2-3/4 1/20.215 4-3/8 3-5/8 3/4 0.215 3-3/4 3-1/4 1/2 0.215 3-3/4 3-1/4 1/20.215 5 4-1/4 3/4 0.215 4-3/8 3-7/8 1/2 0.215 4-3/8 3-7/8 1/20.215 6 5-1/4 3/4 0.215 5 4-1/2 1/2 0.215 5 4-1/2 1/20.215 7 6-1/4 3/4 0.215 6 5-1/2 1/2 0.215 6 5-1/2 1/20.215 8 7-1/4 3/4 0.215 7 6-1/2 1/2 0.215 7 6-1/2 1/20.215 8 7-1/2 1/2 0.215 8 7-1/2 1/21/4-IN. HEX HEAD 1-4-IN. HEX HEAD #3 PHILLIPS HEAD0.180 0.180 0.1180.392 0.392 0.448YES YES YESYES YES YESROUND 3 GALVALUME SQUARE 3 X 3 CARBON STEEL W/ SQUARE 3 X 3 CARBON STEEL W/GALVALUME GALVALUMEMANVILLE ROUNDMANVILLE ROUNDLOCKING PLATE 3 POLYOLEFIN LOCKING PLATE 3 POLYOLEFINREQUIRED REQUIRED REQUIREDOPTIONAL (ACCUDRIVE XL)OPTIONAL (ACCUDRIVE XL)ACCUFACT STAND-UP TOOL (OPTIONAL)894 674 674656 502 502488 425 425YES YES YESYES YES YESFM FM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTYYES YES YESX389

Roof Fasteners: Steel Decks1. COMPANY NAME JOHNS MANVILLE INTERNATIONAL INC. JOHNS MANVILLE INTERNATIONAL, INC.2. PRODUCT NAME HIGHLOAD FASTENER HIGHLOAD ASAP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation AttachmentBuilt-Up MembranesSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE CLIMASEAL CR-107. SHANK TYPE MODIFIED BUTTRESS THREAD MODIFIED BUTTRESS THREAD8. POINT TYPE SELF-DRILLING X-POINT SPADE POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.20 1-1/4 3/4 1/2 0.16 2-1/4 1-3/4 1/20.20 2 1-1/2 1/2 0.16 2-7/8 2-3/8 1/20.20 2 2-1/2 1/2 0.16 3-1/4 2-3/4 1/20.20 4 3-1/2 1/2 0.16 3-3/4 3-1/4 1/20.20 5 4-1/2 1/2 0.16 4-1/2 4 1/20.20 6 5-1/2 1/2 0.16 5 4-1/2 1/20.20 7 6-1/2 1/2 0.16 6 5-1/2 1/20.20 8 7-1/2 1/2 0.16 7 6-1/2 1/20.20 10 9-1/2 1/2 0.16 8 7-1/2 1/20.20 12 11-1/2 1/211. HEAD SHAPE #3 PHILLIPS HEAD #3 PHILLIPS HEAD12. HEAD DIMENSIONS (inches)ThicknessDiameter 0.435 0.43513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND PREM CARBON STEEL W/ ROUND 2 NYLON (LOCKING)LOCKING PLATE 2 POLYOLEFIN (LOCKING)MANVILLE ROUNDLOCKING PLATE 3 POLYOLEFIN15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 850 57520 Gauge 675 52522 Gauge 500 47517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM FM20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKED X XNA = not applicable390

Roof Fasteners: Steel DecksOLYMPIC MANUFACTURING GROUP / N.T.B. OLYMPLIC MANUFACTURING GROUP OLYMPLIC MANUFACTURING GROUPN-C OLYMPIC FASTENER STD #12 (C-STEEL) OLYMPIC FASTENER #12-11 (S-STEEL)U.S. U.S. U.S.X X XX X XX X XNYLON HARDENED CARBON STEEL STAINLESS STEEL, SPECIAL 400-SERIES BLENDNA CR-10 FLUOROCARBON CR-10 FLUOROCARBONSPIRAL THREAD THREADED THREADEDPINCH, SELF-DRILLING, GILMENT OR TAPEXPINCH, SELF-DRILLINGTHREADED THREADED THREADED0.250 4 3-3/4 1 /2 0.160 1-5/8 1-1/8 3/4 0.168 1-5/8 1-1/8 3/40.250 6 5-3/4 1/2 0.160 2-1/4 1-3/4 3/4 0.168 2-1/4 1-3/4 3/40.250 8 7-3/ 4 1/2 0.160 2-7/8 2-3/8 3/4 0.168 2-7/8 2-3/8 3/40.250 10 9-3/4 1/2 0.160 3-1/4 2-3/4 3/4 0.168 3-1/4 2-3/4 3/40.250 12 11-3/4 1/2 0.160 3-3/4 3-1/4 3/4 0.168 3-3/4 3-1/4 3/40.160 4-1/2 4 3/4 0.168 4-1/2 4 3/40.160 5 4-1/2 3/4 0.168 5 4-1/2 3/40.160 6 5-1/2 3/4 0.168 6 5-1/2 3/40.160 7 6-1/2 3/4 0.168 7 6-1/2 3/40.160 8 7-1/2 3/4 0.168 8 7-1/2 3/4DOUBLE HEX ROUND TRUSS, #3 PHILLIPS, OR HEX HEAD ROUND TRUSS, #3 PHILLIPS0.100 0.110 0.1101.0 AND 2.0 0.435 0.4.35YESYESYES YES YESROUND W/SPIKES 2 STEEL ROUND 2 STEEL ROUND 2 STAINLESS STEELROUND W/SPIKES 3 STEEL ROUND 2 PLASTIC ROUND 3 STAINLESS STEELROUND 3 STEEL ROUND 2 STEELROUND 3 PLASTIC ROUND 2 PLASTICROUND 3-1/2 STEEL ROUND 3 STEELROUND 2 STAINLESS STEEL ROUND 3 PLASTICROUND 3 STAINLESS STEEL ROUND 3-1/ 2 STEELREQUIRED REQUIRED REQUIREDOPTIONALOPTIONAL500+ 540 540500+ 501 501500+ 456 456YES YES YESNA YES YESFM FM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTYYES YES YES391

Roof Fasteners: Steel Decks1. COMPANY NAME OLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUP2. PRODUCT NAME OLYMPIC FASTENER HD #14 (C-STEEL) OLYMPIC FASTENER HD #14 (S-STEEL)3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL STAINLESS STEEL, SPECIAL 400-SERIES BLEND6. COATING TYPE CR-10 FLUOROCARBON CR-10 FLUOROCARBON7. SHANK TYPE THREADED THREADED8. POINT TYPE PINCH, SELF-DRILLING, OR TAPEX PINCH, SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.190 1-1/4 3/4 3/4 0.201 1-1/4 3/4 3/40.190 1-3/4 1-1/4 3/4 0.201 1-3/4 1-1/4 3/40.190 2 1-1/2 3/4 0.201 2 1-1/2 3/40.190 3 2-1/2 3/4 0.201 3 2-1/2 3/40.190 4 3-1/2 3/4 0.201 4 3-1/2 3/40.190 5 4-1/2 3/4 0.201 5 4-1/2 3/40.190 6 5-1/2 3/4 0.201 6 5-1/2 3/40.190 7 6-1/2 3/4 0.201 7 6-1/2 3/40.190 8 7-1/2 3/4 0.201 8 7-1/2 3/40.190 9 8-1/2 3/4 0.201 9 8-1/2 3/40.190 10 9-1/2 3/4 0.201 10 9-1/2 3/40.190 11 10-1/2 3/4 0.201 12 11-1/2 3/40.190 12 11-1/2 3/4 0.201 14 13-1/2 3/40.190 14 13-1/2 3/4 0.201 16 15-1/2 3/40.190 16 15-1/2 3/4 0.201 17 16-1/2 3/40.190 17 16-1/2 3/4 0.201 18 17-1/2 3/40.190 18 17-1/2 3/4 0.201 20 19-1/2 3/40.190 20 19-1/2 3/4 0.201 21 20-1/2 3/40.190 21 20-1/2 3/4 0.201 21 20-1/2 3/40.190 22 21-1/2 3/4 0.201 22 21-1/2 3/40.190 24 23-1/2 3/4 0.201 24 23-1/2 3/411. HEAD SHAPE ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.110 0.108Diameter 0.435 0.43513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STEEL ROUND 2 STAINLESS STEELROUND 2 PLASTIC ROUND 3 STAINLESS STEELROUND 3 STEEL ROUND 2 STEELROUND 3 PLASTIC ROUND 2 PLASTICROUND 3-1/2 STEEL ROUND 3 STEELROUND 2 STAINLESS STEEL ROUND 3 PLASTICROUND 3 STAINLESS STEEL ROUND 3-1/ 2 STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 585 58520 Gauge 535 53522 Gauge 505 50517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicableAPPROPRIATE DRIL392

Roof Fasteners: Steel DecksPOWERS FASTENERS, INC. POWERS FASTENERS, INC. POWERS FASTENERS, INC.POWER RAWL SPEED-LOCK TOGGLE POWERS RAWL #12 DECK SCREW POWERS RAWL #14 DECK SCREWU.S. U.S. U.S.X X XX X XX X XCARBON STEEL & STAINLESS STEEL CASE HARDENED CARBON STEEL CASE HARDENED CARBON STEELPERMA-SEAL FLUOROPOLYME (on carbon steel bolt only) PERMA-SEAL FLUOROPOLYMER PERMA-SEAL FLUOROPOLYMERANNULAR THREAD SPIRAL THREAD SPIRAL THREADNA DRILL TYPE DRILL TYPECLAMPING THREADED THREADED0.250 5 3-1/2 1-1/2 0.226 1-5/8 7/8 3/4 0.238 1-5/8 7/8 3/40.250 6 4-1/2 1-1/2 0.226 2-1/4 1-1/2 3/4 0.238 2-1/4 1-1/2 3/40.250 7 5-1/2 1-1/2 0.226 2-7/8 2-1/8 3/4 0.238 2-7/8 2-1/8 3/40.250 8 6-1/2 1-1/2 0.226 3-1/4 2-1/2 3/4 0.238 3-3/4 3 3/40.250 9 7-1/2 1-1/2 0.226 3-3/4 3 3/4 0.238 4-1/2 3-3/4 3/40.250 10 8-1/2 1-1/2 0.226 4-1/2 3-3/4 3/4 0.238 5 4-1/4 3/40.250 12 10-1/2 1-1/2 0.266 5 4-1/4 3/4 0.238 6 5-1/4 3/40.250 14 12-1/2 1-1/2 0.266 6 5-1/4 3/4 0.238 7 6-1/4 3/40.266 7 6-1/4 3/4 0.238 8 7-1/4 3/40.266 8 7-1/4 3/4 0.238 10 9-1/4 3/40.238 12 11-1/4 3/4PHILLIPS FLAT HEAD #3 RECESS PHILLIPS TRUSS HEAD #3 RECESS WASHER / 1/4-IN HEX HEAD PHILLIPS FLAT TRUSS HEAD #3 RECESS0.042 0.130 , 0.140 0.1180.426 0.448, 0.385 0.448YES YES YESYES YES YESROUND 3 GALVALUME ROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3 PLASTIC ROUND 3 PLASTICOPTIONAL REQUIRED REQUIREDOPTIONAL STAND UP TOOL (OPTIONAL) STAND UP TOOL (OPTIONAL)APPROPRIATE DRILL & BIT FOR DRILLING THROUGH DECK (REQUIRED)725 735655 630975 550 505YES YES YESYES YES YESFM FM FMYES YES YESXX393

Roof Fasteners: Steel Decks1. COMPANY NAME POWERS FASTENERS, INC. SFS STADLER INC.2. PRODUCT NAME POWERS RAWL #15 DECK SCREW ISOFAST IF2-M3. COUNTRY OF MANUFACTURE U.S. U,S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CASE HARDENED CARBON STEEL CARBON STEEL6. COATING TYPE PERMA-SEAL FLUOROPOLYMER TUFF-TITE II7. SHANK TYPE SPIRAL THREAD THREADED8. POINT TYPE RICOH "S" POINT SELF-DRILLING 2-FLUTE DRILL POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.264 1-1/4 1/2 3/4 0.189 2 1-1/2 1/20.264 2 1-1/4 3/4 0.189 2-1/4 1-3/4 1/20.264 3 2-1/4 3/4 0.189 2-3/4 2-1/4 1/20.264 4 3-1/4 3/4 0.189 3-1/8 2-5/8 1/20.264 5 4-1/4 3/4 0.189 3-7/8 3-3/8 1/20.264 6 5-1/4 3/4 0.189 4-3/4 4-1/4 1/20.264 7 6-1/4 3/4 0.189 5-1/2 4-3/4 1/20.264 8 7-1/4 3/4 0.189 6-1/4 5-1/2 1/20.264 10 9-1/4 3/40.264 12 11-1/4 3/40.264 14 13-1/4 3/40.264 16 15-1/4 3/411. HEAD SHAPE PHILLIPS TRUSS HEAD #3 RECESS 5/16 HEX HEAD12. HEAD DIMENSIONS (inches)Thickness 0.130 0.156Diameter 0.448 0.40613. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND BARBED 2 GALVALUME OVAL 3-1/4 X 1-5/8 GALVALUMEROUND 3 GALVALUME SQUARE 2-3/4 X 2-3/4 GALVALUMEROUND 3 STAINLESS STEEL DOMED COVEX 3-1/4 X 1-5/8 GALVALUMEROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) STAND UP TOOL (OPTIONAL) REQUIREDSpecial Tool Needed (optional/required)REQUIREDOther16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 800 --20 Gauge 690 55222 Gauge 485 50517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM FM, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKED XNA = not applicable394

Roof Fasteners: Steel DecksSFS STADLER INC. SFS STADLER INC. SFS STADLER INC.ISOFAST IF2-C-M ISOFAST IF-2-S SYSTEM METAL ESU.S. SWITZERLAND U.S.X X XX XXXCARBON STEEL 300 SERIES STAINLESS STEEL HARDENED STEELTUFF-TITE IITUFF TITE IITHREADED THREADED SPIRAL THREADSELF-DRILLING 2 FLUTE DRILL POINT SELF-DRILLING 2 FLUTE DRILL POINT SELF-DRILLING AND FLUTE DRILL POINTTHREADED THREADED THREADED0.189 2-1/8 1-5/8 1/2 0.189 2 1-1/2 1/2 0.189 2 1-1/2 1/20.189 2-1/4 1-3/48 1/2 0.189 3-1/8 2-5/8 1/2 0.189 2-1/4 1-3/4 1/20.189 2-3/4 2-1/4 1/2 0.189 3-7/8 3-3/8 1/2 0.189 2-3/4 2-1/4 1/20.189 3-1/8 2-5/8 1/2 0.189 4-3/4 4-1/4 1/2 0.189 3-1/8 2-5/8 1/20.189 3-7/8 3-3/8 1/2 0.189 5-1/2 4-3/4 1/2 0.189 3-7/8 3-3/8 1/20.189 4-3/4 4-1/4 1/2 0.189 6-1/4 5-1/2 1/2 0.189 4-3/4 4-1/4 1/20.189 5-1/2 4-3/4 1/2 0.189 5-1/2 4-3/4 1/20.189 6-1/4 5-1/2 1/2 0.189 6-1/4 5-1/2 1/2#2 POSI-DRIVE COUNTERSUNK 8mm HEX HEAD 8mm HEX HEAD0.156 0.156 0.1560.406 0.406 0.406YESYESYESYESOVAL 3-1/4 X 1-5/8 GALVALUME OVAL 3-1/4 X 1-5/8 GALVALUME ROUND 3 GALVALUMESQUARE 2-3/4 X 2-3/4 GALVALUME SQUARE 2-3/4 X 2-3/4 GALVALUMEDOMED COVEX 3-1/4 X 1-5/8 GALVALUME DOMED COVEX 3-1/4 X 1-5/8 GALVALUMEREQUIRED REQUIRED REQUIREDREQUIRED OPTIONAL OPTIONALREQUIRED OPTIONAL OPTIONAL-- -- --552 552 552505 451 451YES YES YESYESYESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YESX X X395

Roof Fasteners: Steel Decks1. COMPANY NAME SFS STADLER INC. SFS STADLER INC.2. PRODUCT NAME INSUL-FIXX #12-11 INSUL-FIXX #14-103. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED STEEL HARDENED STEEL6. COATING TYPE TUFF-TITE II TUFF-TITE II7. SHANK TYPE SPIRAL THREAD THREADED8. POINT TYPE DRILL POINT DRILL POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.172 1-5/8 1-3/8 1/2 0.190 1-1/4 3/4 1/20.172 2-1/4 1-3/4 1/2 0.190 2 1-1/2 1/20.172 2-7/8 2-3/8 1/2 0.190 3 2-1/2 1/20.172 3-1/4 2-3/4 1/2 0.190 4 3-1/2 1/20.172 4-1/2 4 1/2 0.190 5 4-1/2 1/20.172 5 4-1/2 1/2 0.190 6 5-1/2 1/20.172 6 5-1/2 1/2 0.190 7 6-1/2 1/20.172 7 6-1/2 1/2 0.190 8 7-1/2 1/20.172 8 7-1/2 1/2 0.190 10 9-1/2 1/20.190 12 11-1/2 1/20.190 14 13-1/2 1/20.190 16 15-1/2 1/20.190 18 17-1/2 1/20.190 20 19-1/2 1/20.190 22 21-1/2 1/20.190 24 23-1/2 1/20.190 26 25-1/2 1/211. HEAD SHAPE ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.103 0.103Diameter 0.425 0.42513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3 POLYETHYLENE ROUND 3 POLYETHYLENEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUMEROUND 2 NYLON WITH GLASS15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 660 69020 Gauge 575 61022 Gauge 481 53517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKED XNA = not applicable396

Roof Fasteners: Steel DecksSFS STADLER INC. SFS STADLER INC. SFS STADLER INC.SYSTEM ES I $14-10 SYSTEM ES I #12-11 SYSTEM ES I #14-10U.S. U.S. U.S.X X XX X XX X XHARDENED STEEL HARDENED STEEL HARDENED STEELTRUFF-TITE II TUFF-TITE II TUFF-TITE IITHREADED SPIRAL THREAD THREADEDDRILL POINT DRILL POINT DRILL POINTTHREADED THREADED THREADED0.190 2 1-3/8 1/2 0.172 2-1/4 1-3/4 1/2 0.190 2 1-3/8 1/20.190 3 2-1/2 1/2 0.172 2-7/8 2-3/8 1/2 0.190 3 2-1/2 1/20.190 4 3-1/2 1/2 0.172 3-1/4 2-3/4 1/2 0.190 4 3-1/2 1/20.190 5 4-1/2 1/2 0.172 4-1/2 4 1/2 0.190 5 4-1/2 1/20.190 6 5-1/2 1/2 0.172 5 4-1/2 1/2 0.190 6 5-1/2 1/20.190 7 6-1/2 1/2 0.172 6 5-1/2 1/2 0.190 7 6-1/2 1/20.190 8 7-1/2 1/2 0.172 7 6-1/2 1/2 0.190 8 7-1/2 1/20.190 10 9-1/2 1/2 0.172 8 7-1/2 1/2 0.190 10 9-1/2 1/20.190 12 11-1/2 1/2 0.190 12 11-1/2 1/2ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS0.103 0.103 0.1030.425 0.425 0.425YES YES YESYES YES YESROUND 3 POLYETHYLENE ROUND 3 POLYETHYLENE ROUND 2 NYLON WITH GLASSROUND 3 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL REQUIREDOPTIONAL OPTIONAL REQUIRED690 650 690610 575 610535 481 535YES YES YESYES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YESX X X397

Roof Fasteners: Steel Decks1. COMPANY NAME SFS STADLER INC. SFS STADLER2. PRODUCT NAME EXTRA LOAD FASTENER HD TPR-THE PEEL RIVET3. COUNTRY OF MANUFACTURE U.S. ISRAEL4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED STEEL ALUMINUM ALLOY6. COATING TYPE TUFF-TITE II NA7. SHANK TYPE THREADED HOLLOW RIVET BODY8. POINT TYPE DRILL POINT PIERCING MANDREL9. METHOD OF ATTACHMENT THREADED CLAMPING10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.205 1-1/4 3/4 1/2 0.250 1-1/4 1/4 10.205 2 1-1/2 1/2 0.250 2 1 10.205 3 2-1/2 1/2 0.250 3 2 10.205 4 3-1/2 1/2 0.250 4 3 10.205 5 4-1/2 1/2 0.250 5 4 10.205 6 5-1/2 1/2 0.250 6 5 10.205 8 7-1/2 1/2 0.250 7 6 10.205 10 9-1/2 1/2 0.250 8 7 10.205 12 11-1/2 1/2 0.250 9 8 10.205 14 13-1/2 1/2 0.250 10 9 10.205 16 15-1/2 1/211. HEAD SHAPE ROUND WITH #3 PHILLIPS TRUSS LOW PROFILE MUSHROOM12. HEAD DIMENSIONS (inches)Thickness 0.103 0.075Diameter 0.425 0.48013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)OPTIONALSpecial Tool Needed (optional/required)REQUIREDOther16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge -- --20 Gauge -- 60522 Gauge 782 57617. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKED XNA = not applicable398

Roof Fasteners: Steel DecksTRI-PLY TRU-FAST CORPORATION TRU-FAST CORPORATIONTRI-FAST DP HD DRILL POINT STAINLESS STEEL TPU.S. U.S. U.S.X X XX X XX X XCARBON STEEL STAINLESS STEEL (TRIMTITE ALLOY #S-42010) CARBON STEEL C-1022TRU-KOTE PC-3 (FLUOROCARBON PAINT)TRU-KOTE PC-3 (FLUOROCARBON PAINT)THREADED THREADED THREADEDDOULBE FLUTE SELF-DRILLING DOUBLE FLUTE SELF-DRILLING GIMLETTHREADED THREADED THREADED0.160 1-5/8 1-1/8 1/2 0.180 1-1/2 1 1/2 0.150 1-5/8 1-1/8 1/20.160 2-1/4 1-3/4 1/2 0.180 2 1-1/2 1/2 0.150 2-1/4 1-3/4 1/20.160 2-7/8 2-3/8 1/2 0.180 3 2-1/2 1/2 0.150 2-7/8 2-3/8 1/20.160 3-3/4 3-1/4 1/2 0.180 4 3-1/2 1/2 0.150 3-3/4 3-1/4 1/20.160 4-1/2 4 1/2 0.180 5 4-1/2 1/2 0.150 4-1/2 4 1/20.160 5 4-1/2 1/2 0.180 6 5-1/2 1/2 0.150 5 4-1/2 1/20.160 6 5-1/2 1/2 0.180 7 6-1/2 1/2 0.150 6 5-1/2 1/20.160 7 6-1/2 1/2 0.180 8 7-1/2 1/20.160 8 7-1/2 1/2 0.180 10 9-1/2 1/20.160 10 9-1/2 1/2 0.180 12 11-1/2 1/20.160 12 11-1/2 1/21/4" HEX HEAD TRUSS #3 PHILLIPS TRUSS #3 PHILLIPS0.105 0.105 0.1100.440 0.440 0.390YESYESROUND 3 GALVALUME ROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 3 PLASTIC ROUND 2.4 GALVALUME ROUND 2.4 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTICREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL795 830605 656 610428 472 494YES YES YESYES YES YESFM FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YES399

Roof Fasteners: Steel Decks1. COMPANY NAME TRU-FAST CORPORATION TRU-FAST CORPORATION2. PRODUCT NAME DP (DRILL POINT) HD (HEAVY DUTY) #143. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL C-1022 CARBON STEEL C-10226. COATING TYPE TRU-KOTE PC-3 (FLUOROCARBON PAINT) TRU-KOTE PC-3 (FLUOROCARBON PAINT)7. SHANK TYPE THREADED THREADED8. POINT TYPE DOUBLE FLUTE SELF-DRILLING DOUBLE FLUTE SELF-DRILLING9. METHOD OF ATTACHMENT THREADS THREADS10. SHANK DIAMETER (INCHES) / SHANK LENGTH (INCHES) /THICKNESS (INCHES) / DECK PENETRATION (INCHES)0.160 1-5/8 1-1/8 1/2 0.180 1-1/2 1 1/20.160 2-1/4 1-3/4 1/2 0.180 2 1-1/2 1/20.160 2-7/8 2-3/8 1/2 0.180 3 2-1/2 1/20.160 3-1/4 2-3/4 1/2 0.180 4 3-1/2 1/20.160 3-3/4 3-1/4 1/2 0.180 5 4-1/2 1/20.160 4-1/2 4 1/2 0.180 6 5-1/2 1/20.160 5 4-1/2 1/2 0.180 7 6-1/2 1/20.160 6 5-1/2 1/2 0.180 8 7-1/2 1/20.160 7 6-1/2 1/2 0.180 10 9-1/2 1/20.160 8 7-1/2 1/2 0.180 12 11-1/2 1/211. HEAD SHAPE TRUSS #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.105 0.105Diameter 0.440 0.44013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 2.4 GALVALUME ROUND 2.4 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required) REQUIRED REQUIREDSpecial Tool Needed (optional/required) OPTIONAL OPTIONALOther16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)18 Gauge 558 85020 Gauge 456 65622 Gauge 452 47217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I STEEL ROOF DECK (yes/no) YES YES18. PASSES FM TEST PROCEDURE 4470 FOR CORROSIONRESISTANCE (yes/no YES YES19. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY20. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES21. SEE APPENDIX IF CHECKEDNA = not applicable400

Roof Fasteners: Steel DecksTRU-FAST CORPORATIONEHD (EXTRA HEAVY DUTY) #15U.S.XXCARBON STEEL C-1022TRU-KOTE PC-3 (FLUOROCARBON PAINT)THREADEDDOUBLE FLUTE SELF-DRILLINGTHREADSU.S. INTECDRILL-TEC CDPU.S.XXXCARBON STEELFLUOROPOLYMER PAINTTHREADEDDRILL POINTMECHANICAL0.204 1-1/4 3/4 1/2 0.180 1-1/4 1/4 10.204 2 1-1/2 1/2 0.180 1-3/4 3/4 10.204 3 2-1/2 1/2 0.180 2-1/4 1-1/4 10.204 4 3-1/2 1/2 0.180 2-3/4 1-3/4 10.204 5 4-1/2 1/2 0.180 3-1/4 2-1/4 10.204 6 5-1/2 1/2 0.180 3-3/4 2-3/4 10.204 7 6-1/2 1/2 0.180 4-1/4 3-1/4 10.204 8 7-1/2 1/2 0.180 5 4 10.204 9 8-1/2 1/2 0.180 6 5 10.204 10 9-1/2 1/2 0.180 7 6 10.204 11 10-1/2 1/2 0.180 8 7 10.204 12 11-1/2 1/20.204 14 13-1/2 1/20.204 16 15-1/2 1/20.204 18 19-1/2 1/20.204 20 19-1/2 1/2TRUSS #3 PHILLIPSHEX OR #3 PHILLIPS0.1050.440YESYESYESYESROUND 3 GALVALUME ROUND 2.7 GALVALUMEROUND 2 GALVALUME ROUND 3 PLASTICROUND 2.4 GALVALUMEROUND 3 PLASTICREQUIREDOPTIONALREQUIREDOPTIONALOPTIONAL-- 558-- 456452YESYESFM, METRO-DADE COUNTYYESYESYESFM, METRO-DADE COUNTYYES401

Roof Fasteners: Wood Decks1. COMPANY NAME CARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED2. PRODUCT NAME HP FASTENER HP WOODIE3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL ZAMAC6. COATING TYPE EPOXY ELECTRODEPOSITION7. SHANK TYPE SINGLE LEAD, BUTTRESS THREAD SPIRALTHREAD8. POINT TYPE MINI-DRILL POINT PIERCE-POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.180 1-1/4 1/4 1 1 0.500 1-3/4 0 -- --0.180 1-3/4 3/4 1 1 0.500 2-1/2 1/2 to 3/4 -- --0.180 2-1/4 1-1/4 1 1 0.500 3-1/4 1 to 1-1/2 -- --0.180 2-3/4 1-3/4 1 10.180 3-1/4 2-1/4 1 10.180 3-3/4 2-3/4 1 10.180 4-1/4 3-1/4 1 10.180 5 4 1 10.180 6 5 1 10.180 7 6 1 10.180 8 7 1 10.180 9 8 1 10.180 10 9 1 10.180 11 10 1 10.180 12 11 1 10.180 13 12 1 10.180 14 13 1 10.180 15 14 1 111. HEAD SHAPE WAFER FLUSH RECESS12. HEAD DIMENSIONS (inches)Thickness 0.105 0.073Diameter 0.430 0.60013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALSQUARE W/ROUNDED ROUND 2 GALVALUMECORNER 2-7/8 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUMELOCKING 2 GALVALUME W/PLASTICROUND 2 PLASTICROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)OtherAUTOMATIC FASTENING TOOL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood -- --2-inch pine plank -- --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable402

Roof Fasteners: Wood DecksCARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED CELOTEX CORPORATIONHP-X FASTENER SURE FAST FASTENERS ANCHORBOND #12U.S. U.S. U.S.XXXXXCARBON STEEL CARBON STEEL HARDENED CARBON STEELEPOXY ELEXTRODEPOSITION EPOXY ELEXTRODEPOSITION ORGANIC FLUOROPOLYMERSSINGLE LEAD, BUTTRESS THREAD SINGLE LEAD, BUTTRESS THREAD SPIRAL THREADDRILL POINT DRILL POINT SELF-DRILLINGTHREADED THREADED THREADED0.201 2 1 1 -- 0.160 2-1/4 1-1/4 1 1 0.222 1-5/8 5/8 3/4 10.201 3 2 1 -- 0.160 2-7/8 1-7/8 1 1 0.222 2-1/4 1-1/4 3/4 10.201 4 3 1 -- 0.160 3-1/4 2-1/4 1 1 0.222 2-7/8 1-7/8 3/4 10.201 5 4 1 -- 0.160 3-3/4 2-3/4 1 1 0.222 3-3/4 2-3/4 3/4 10.201 6 5 1 -- 0.160 4-1/2 3-1/2 1 1 0.222 4-1/2 3-1/2 3/4 10.201 7 6 1 -- 0.160 5 4 1 1 0.222 5 4 3/4 10.201 8 7 1 -- 0.160 6 5 1 10.201 10 9 1 -- 0.160 7 6 1 10.201 12 11 1 -- 0.160 8 7 1 10.201 14 13 1 --TRUSS, #3 PHILLIPS TRUSS #3 PHILLIPS #3 PHILLIPS TRUSS & 1/4" HEX WASHER HEAD0.115 0.100 0.1090.435 0.425 0.438YES YES YESYES YES YESROUND 2-3/8 CARBON STEEL ROUND 3 GALVALUME HEXAGONAL 2-7/8 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONALAUTOMATIC FASTENING TOOL-- 617-- 1265YESFMFMYES YES YESXYES403

Roof Fasteners: Wood Decks1. COMPANY NAME CELOTEX CORPORATION CELOTEX CORPORATION2. PRODUCT NAME ANCHORBOND #14 ANCHORBOND #15 HEAVY DUTY3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE ORGANIC FLUOROPOLYMERS ORGANIC FLUOROPOLYMERS7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE SELF-DRILLING SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.238 1-1/4 1/4 3/4 1 0.264 1-1/4 1/4 3/4 10.238 1-5/8 5/8 3/4 1 0.264 2 1 3/4 10.238 1-7/8 1-1/4 3/4 1 0.264 3 2 3/4 10.238 2-7/8 1-7/8 3/4 1 0.264 4 3 3/4 10.238 3-1/4 2-1/4 3/4 1 0.264 5 4 3/4 10.238 3-3/4 2-3/4 3/4 1 0.264 6 5 3/4 10.238 4-1/2 3-1/2 3/4 1 0.264 7 6 3/4 10.238 5 4 3/4 1 0.264 8 7 3/4 10.238 6 5 3/4 1 0.264 10 9 3/4 10.238 7 6 3/4 1 0.264 12 11 3/4 10.238 8 7 3/4 1 0.264 14 13 3/4 10.264 16 15 3/4 111. HEAD SHAPE # 3 PHILLIPS FLAT TRUSS #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.109 0.109Diameter 0.438 0.43813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEXAGONAL 2-7/8 STAINLESS STEEL HEXAGONAL 2-7/8 STAINLESS STEELHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 3 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 671 7802-inch pine plank 1470 150017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable404

Roof Fasteners: Wood DecksCELOTEX CORPORATION CONSTRUCTION FASTENERS, INC. CONSTRUCTION FASTENERS, INC.ANCHORBOND #14 STAINLESS STEEL DEKFAST #12 DEKFAST #14U.S. U.S. U.S.X X XX X XX X XSTAINLESS STEEL (#304) HARDENED CARBON STEEL HARDENED CARBON STEELORGANIC FLUOROPOLYMERS ORGANIC ORGANICSPIRAL THREAD SPIRAL THREAD SPIRAL THREADSELF-DRILLING SELF-DRILLING SELF-DRILLINGTHREADED THREADED THREADED0.264 3 1-1/2 3/4 1 0.222 1-5/8 5/8 3/4 1 0.238 1-1/4 1/4 3/4 10.264 4 2-1/2 3/4 1 0.222 2-1/4 1-1/4 3/4 1 0.238 1-5/8 5/8 3/4 10.264 5 3-1/2 3/4 1 0.222 2-7/8 1-7/8 3/4 1 0.238 2-1/4 1-1/4 3/4 10.264 6 4-1/2 3/4 1 0.222 3-1/4 2-1/4 3/4 1 0.238 2-7/8 1-7/8 3/4 10.264 7 5-1/2 3/4 1 0.222 3-3/4 2-3/4 3/4 1 0.238 3-1/4 2-1/4 3/4 10.264 8 6-1/2 3/4 1 0.222 4-1/2 3-1/2 3/4 1 0.238 3-3/4 2-3/4 3/4 10.222 5 4 3/4 1 0.238 4-1/2 3-1/2 3/4 10.222 6 5 3/4 1 0.238 5 4 3/4 10.222 7 6 3/4 1 0.238 6 5 3/4 10.222 8 7 3/4 1 0.238 7 6 3/4 10.238 8 7 3/4 10.238 10 9 3/4 10.238 12 11 3/4 1# 3PHILLIPS TRUSS #3 PHILLIPS TRUSS & 1/4" HEX WASHER HEAD #3 PHILLIPS FLAT TRUSS0.109 0.109, 0.190 0.1090.438 0.438, 0.438 0.438YES YES YESYES YES YESHEXAGONAL 2-7/8 STAINLESS STEEL HEXAGONAL 2-7/8 RECESS GALVALUME HEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUME HEXAGONAL 3 PLASTICHEXAGONAL 3 PLASTIC HEXAGONAL 3 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUME ROUND 2 NYLONROUND 2 NYLONREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL773 575 5901250 1816 1943YES YES YESFM FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YESXX405

Roof Fasteners: Wood Decks1. COMPANY NAME CONSTRUCTION FASTENERS, INC. CONSTRUCTION FASTENERS, INC.2. PRODUCT NAME DEKFAST #15 HI-STRENGTH #14 DEKFAST STAINLESS STEEL3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL STAINLESS STEEL (TRIMRITE)6. COATING TYPE ORGANIC NONE7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE SELF-DRILLING SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.264 1-1/4 1/4 3/4 1 0.235 1-1/4 1/2 3/4 10.264 2 1 3/4 1 0.235 2 1 3/4 10.264 3 2 3/4 1 0.235 3 2 3/4 10.264 4 3 3/4 1 0.235 4 3 3/4 10.264 5 4 3/4 1 0.235 5 4 3/4 10.264 6 5 3/4 1 0.235 6 5 3/4 10.264 7 6 3/4 1 0.235 7 6 3/4 10.264 8 7 3/4 1 0.235 8 7 3/4 10.264 10 9 3/4 1 0.235 10 9 3/4 10.264 12 11 3/4 1 0.235 12 11 3/4 10.264 14 13 3/4 10.264 16 15 3/4 10.264 18 17 3/4 10.264 20 19 3/4 10.264 22 21 3/4 10.264 24 23 3/4 10.264 26 25 3/4 111. HEAD SHAPE # 3 PHILLIPS TRUSS #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.109 0.105Diameter 0.438 0.44013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEXAGONAL 2-7/8 GALVALUME ROUND 2 GALVALUMEROUND 2 GALVALUME ROUND 3 GALVALUMEROUND 2-1/2 GALVALUME ROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 703 5902-inch pine plank 2217 194317. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable406

Roof Fasteners: Wood DecksDURO LAST INC. ES PRODUCTS INC. FIRESTONE BUILDING PRODUCTSDURO LAST SCREWS #14 HARDENED DO-ALL LOC-NAIL FIRESTONE ALL PURPOSEU.S. U.S. U.S.XXX X XSTEEL HARDENED COLD ROLL STEEL SAE 1022, HEAT TREATEDFLUOROCARBON ZINC PLATED EPOXYSPIRAL THREAD SPLIT, SERRATED SPIRAL THREADEDSELF-DRILLING 2 SHARP POINTS DRILL POINTTHREADED SPREAD OF SERRATED SHANKS THREADED0.190 1-3/4 3/4 1 1 0.240 1-3/8 1/4 1/2 1 0.235 1-1/4 1/4 1 10.190 2 1 1 1 0.235 1-5/8 5/8 1 10.190 2-1/2 1-1/2 1 1 0.235 2-1/4 1-1/4 1 10.190 3 2 1 1 0.235 2-7/8 1-7/8 1 10.190 3-1/2 2-1/2 1 1 0.235 3-1/4 2-1/4 1 10.190 4 3 1 1 0.235 3-3/4 1-3/4 1 10.190 4-1/2 3-1/2 1 1 0.235 4-1/2 3-1/2 1 10.190 5 4 1 1 0.235 5 4 1 10.190 5-1/2 4-1/2 1 1 0.235 6 5 1 10.190 6 5 1 1 0.235 7 6 1 10.190 7 6 1 1 0.235 8 7 1 10.190 8 7 1 10.190 9 8 1 10.190 10 9 1 10.190 11 10 1 10.190 12 11 1 1TRUSS SQUARE WITH ROUNDED CORNERS ROUND MUSHROOM #3 PHILLIPS0.103 0.050 0.1100.438 0.375 0.437YES YES YESYES YES YESROUND 2 POLLYCARBONATE ROUND 1-3/16 PRE-TINNED STEEL HEX (INSULATION) 2-7/8 GALVALUMEROUND (IN-SEAM) 2 GALVALUMEROUND (IN-SEAM) 2-3/8 GALVALUMEREQUIREDOPTIONALREQUIREDOPTIONALHAMMER930 134 --983 141 --YESFM, ICBO, BOCA, SBCCIFM, ICBO, UL, SBCCIYES YES YESYES407

Roof Fasteners: Wood Decks1. COMPANY NAME FIRESTONE BUILDING PRODUCTS GAF MATERIALS CORP.2. PRODUCT NAME FIRESTONE HEAVY DUTY GAFTITE #12-11/EVERGUARD EGIN3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE SAE 1022, HEAT TREATED HARDENED CARBON STEEL6. COATING TYPE EPOXY CR-10 FLUOROCARBON7. SHANK TYPE BUTTRESS THREAD THREADED8. POINT TYPE DRILL POINT PINCH, SELF-DRILLING, GIMLET OR TAPEX9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.264 1-1/4 1/4 1 1 0.160 1-5/8 5/8 1/2 10.264 2 1 1 1 0.160 2-1/4 1-1/4 1/2 10.264 3 2 1 1 0.160 2-7/8 1-7/8 1/2 10.264 4 3 1 1 0.160 3-1/4 2-1/4 1/2 10.264 5 4 1 1 0.160 3-3/4 2-3/4 1/2 10.264 6 5 1 1 0.160 4-1/2 3-1/2 1/2 10.264 7 6 1 1 0.160 5 4 1/2 10.264 8 7 1 1 0.160 6 5 1/2 10.264 10 9 1 1 0.160 7 6 1/2 10.264 12 11 1 1 0.160 8 7 1/2 10.264 14 13 1 111. HEAD SHAPE ROUND MUSHROOM #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.110 0.110Diameter 0.437 0.43513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEX (INSULATION) 2-7/8 GALVALUME ROUND 2 STEELROUND (IN-SEAM) 2 GALVALUME ROUND 2 PLASTICROUND (IN-SEAM) 2-3/8 GALVALUME ROUND 2 STAINLESS STEELROUND 3 STEELROUND 3 PLASTICROUND 3 STAINLESS STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood -- 5312-inch pine plank -- 73517. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, ICBO, UL, SBCCI FM, ICBO,UL, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable408

Roof Fasteners: Wood DecksGAF MATERIALS CORP. GAF MATERIALS CORP. GAF MATERIALS CORP.GAFTITE #12-11/EVERGUARD EGIN GAFTITE #14-10/EVEGUARD EGHD GAFTITE #14-10/EVEGUARD EGHDU.S. U.S. U.S.X X XX X XX X XSTAINLESS STEEL, SPECIAL 400-SERIES BLEND HARDENED CARBON STEEL STAINLESS STEEL, SPECIAL 400-SERIES BLENDCR-10 FLUOROCARBON CR-10 FLUOROCARBON CR-10 FLUOROCARBONTHREADED PINCH, SELF-DRILLING OR TAPEX THREADEDPINCH, SELF-DRILLING THREADED PINCH, SELF-DRILLINGTHREADEDTHREADED0.160 1-5/8 1-3/8 1/2 1 0.190 1-1/4 1/2 1/2 1 0.201 1-1/4 1/2 1/2 10.160 2-1/4 1-3/4 1/2 1 0.190 1-3/4 3/4 1/2 1 0.201 1-3/4 3/4 1/2 10.160 2-7/8 2-3/8 1/2 1 0.190 2 1 1/2 1 0.201 2 1 1/2 10.160 3-1/4 2-3/4 1/2 1 0190 3 2 1/2 1 0.201 3 2 1/2 10.160 3-3/4 3-1/4 1/2 1 0.190 4 3 1/2 1 0.201 4 3 1/2 10.160 4-1/2 4 1/2 1 0190 5 4 1/2 1 0.201 5 4 1/2 10.160 5 4-1/2 1/2 1 0.190 6 5 1/2 1 0.201 6 5 1/2 10.160 6 5-1/2 1/2 1 0.190 7 6 1/2 1 0.201 7 6 1/2 10.160 7 6-1/2 1/2 1 0.190 8 7 1/2 1 0.201 8 7 1/2 10.160 8 7-1/2 1/2 1 0.190 10 9 1/2 1 0.201 9 8 1/2 10.190 12 11 1/2 1 0.201 10 9 1/2 10.190 14 13 1/2 1 0.201 12 11 1/2 10.190 16 15 1/2 1 0.201 14 13 1/2 10.190 17 16 1/2 1 0.201 16 15 1/2 10.190 18 17 1/2 1 0.201 18 17 1/2 10.190 20 19 1/2 1 0.201 20 19 1/2 10.190 21 20 1/2 1 0.201 21 20 1/2 10.190 22 21 1/2 1 0.201 22 21 1/2 10.190 24 23 1/2 1 0.201 24 23 1/2 1ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS0.110 0.110 0.1080.435 0.435 0.435YES YES YESYES YES YESROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEELROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 2 STEEL ROUND 2 STEEL ROUND 2 STEELROUND 2 PLASTIC ROUND 2 PLASTIC ROUND 2 PLASTICROUND 3 STEEL ROUND 3 STEEL ROUND 3 STEELROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 3 PLASTICREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL531 590 590735 820 820YES YES YESFM, ICBO, UL, METRO-DADE COUNTY FM, ICBO, UL, METRO-DADE COUNTY FM, ICBO, UL, METRO-DADE COUNTYYES YES YESX X X409

Roof Fasteners: Wood Decks1. COMPANY NAME HILTI INC. HILTI INC.2. PRODUCT NAME HILTI FASTENERS #12 HILTI FASTENERS #12 S.S.3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL C-1022 STAINLESS STEEEL (TRIMLITE ALLOY S-42010)6. COATING TYPE TRU-KOTE PC-3 (FLUOROPOLYMER PAINT) NA7. SHANK TYPE THREADED THREADED8. POINT TYPE DOUBLE FLUTED SELF-DRILLING DOUBLE FLUTED SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.160 1-5/8 5/8 1 1 0.160 1-5/8 5/8 1 10.160 2-1/4 1-1/4 1 1 0.160 2-1/4 1-1/4 1 10.160 2-7/8 1-7/8 1 1 0.160 2-7/8 1-7/8 1 10.160 3-1/4 2-1/4 1 1 0.160 3-3/4 2-3/4 1 10.160 3-3/4 2-3/4 1 1 0.160 4-1/2 3-1/2 1 10.160 4-1/2 3-1/2 1 1 0.160 5 4 1 10.160 5 4 1 1 0.160 6 5 1 10.160 6 5 1 1 0.160 7 6 1 10.160 7 6 1 1 0.160 8 7 1 10.160 8 7 1 1 0.160 10 9 1 10.160 12 11 1 111. HEAD SHAPE #10 TRUSS, PHILLIPS #3 #10 TRUSS, PHILLIPS #312. HEAD DIMENSIONS (inches)Thickness 0.105 0.105Diameter 0.440 0.44013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 566 5662-inch pine plank 1248 124817. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable410

Roof Fasteners: Wood DecksHILTI INC. HILTI INC. ITW BUILDEXHILTI FASTENERS #14 HILTI FASTENERS #10 HEXTRAU.S. U.S. U.S.X X XX X XX X XCARBON STEEL C-1022 CARBON STEEL C-1022 HARDENED CARBON STEELTRU-KOTE PC-3 (FLUOROPOLYME RPAINT) TRU-KOTE PC-3 (FLUOROPOLYME RPAINT) CLIMASEAL OR SPEXTHREADED THREADED MODIFIED BUTTRESS THREADDOUBLE FLUTED SELF-DRILLING GIMLET X-POINTTHREADED THREADED THREADED0.180 1-1/2 1/2 1 1 0.150 1-5/8 5/8 1 1 0.215 1-5/8 5/8 1 10.180 2 1 1 1 0.150 2-1/4 1-1/4 1 1 0.215 2-1/4 1-1/4 1 10.180 3 2 1 1 0.150 2-7/8 1-7/8 1 1 0.215 2-7/8 1-7/8 1 10.180 4 3 1 1 0.150 3-3/4 2-3/4 1 1 0.215 3-1/4 2-1/4 1 10.180 5 4 1 1 0.150 4-1/2 3-1/2 1 1 0.215 3-3/4 2-3/4 1 10.180 6 5 1 1 0.150 5 4 1 1 0.215 4-3/8 3-3/8 1 10.180 7 6 1 1 0.150 6 5 1 1 0.215 5 4 1 10.180 8 7 1 1 0.215 6 5 1 10.180 10 9 1 1 0.215 7 6 1 10.180 11 10 1 1 0.215 8 7 1 1TRUSS #3 PHILLIPS TRUSS #3 PHILLIPS 1/4-IN. HEX HEAD0.105 0.110 0.1800.440 0.390 0.392YES YES YESYES YES YESROUND 2 GALVALUME ROUND 2 GALVALUME SQUARE 3 X 3 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUME GEARLOCK 3 POLYOLEFINROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 2 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONALOPTIONALACCURIVE XL PLUS (OPTIONAL)495 636 544517 938 1292YES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YES411

Roof Fasteners: Wood Decks1. COMPANY NAME ITW BUILDEX ITW BUILDEX2. PRODUCT NAME ROOFGRIP ACCUTRAC FASTENER3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply MembranesX5. MATERIAL TYPE HARDENED CARBON STEEL OR STAINLESS STEEL HARDENED CARBON STEEL6. COATING TYPE SPEX CLIMASEAL7. SHANK TYPE MODIFIED BUTTRESS THREAD MODIFIED BUTTRESS THREAD8. POINT TYPE X-POINT X-POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.215 1-5/8 5/8 1 1 0.215 1-5/8 5/8 1/2 1/20.215 2-1/4 1-1/4 1 1 0.215 2-1/4 1-1/4 1/2 1/20.215 2-7/8 1-7/8 1 1 0.215 2-7/8 1-7/8 1/2 1/20.215 3-1/4 2-1/4 1 1 0.215 3-1/4 2-1/4 1/2 1/20.215 3-3/4 2-3/4 1 1 0.215 3-3/4 2-3/4 1/2 1/20.215 4-3/8 3-3/8 1 1 0.215 4-3/8 3-3/8 1/2 1/20.215 5 4 1 1 0.215 5 4 1/2 1/20.215 6 5 1 1 0.215 6 5 1/2 1/20.215 7 6 1 10.215 8 7 1 111. HEAD SHAPE #3 PHILLIPS PAN HEAD 1/4 IN. HEX HEAD OR #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.118 0.180Diameter 0.448 0.39213. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALSQUARE 3 X 3 GALVALUME SQUARE 3 X 3 GALVALUMEGEARLOCK 3 POLYOLEFINROUND 2 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required) ACCURIVE XL PLUS (OPTIONAL) ACCUTRAC I, II, OR III (REQUIRED)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 544 5442-inch pine plank 1292 129217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable412

Roof Fasteners: Wood DecksITW BUILDEX ITW BUILDEX ITW BUILDEXROOFGRIP PLUS #14 ROOFGRIP #15 ROOFGRIPU.S. U.S. U.S.X X XXXXXCARBON STEEL HARDENED CARBON STEEL HARDENED CARBON STEELSPEX CLIMASEAL CLIMASEALMODIFIED BUTTRESS THREAD MODIFIED STANDARD THREAD MODIFIED STANDARD THREADX-POINT X-POINT DRILL-POINTTHREADED THREADED THREADED0.215 2-1/4 1-1/4 1/2 1/2 0.245 1-1/2 1 1/2 1/2 0.260 1-1/4 3/4 1/2 1/20.215 2-7/8 2-3/8 1/2 1/2 0.245 2 1-1/2 1/2 1/2 0.260 2 1-1/2 1/2 1/20.215 3-1/4 2-3/4 1/2 1/2 0.245 3 2-1/2 1/2 1/2 0.260 3 2-1/2 1/2 1/20.215 3-3/4 3-1/4 1/2 1/2 0.245 4 3-1/2 1/2 1/2 0.260 4 3-1/2 1/2 1/20.215 4-3/8 3-7/8 1/2 1/2 0.245 5 4-1/2 1/2 1/2 0.260 5 4-1/2 1/2 1/20.215 5 4-1/2 1/2 1/2 0.245 6 5-1/2 1/2 1/2 0.260 6 5-1/2 1/2 1/20.215 6 5 1/2 1/2 0.245 7 6-1/2 1/2 1/2 0.260 7 6-1/2 1/2 1/20.215 7 6 1/2 1/2 0.245 8 7-1/2 1/2 1/2 0.260 8 7-1/2 1/2 1/20.215 8 7 1/2 1/2 0.260 10 9-1/2 1/2 1/20.260 12 11-1/2 1/2 1/20.260 14 13-1/2 1/2 1/20.260 16 15-1/2 1/2 1/2#3 PHILLIPS PAN HEAD #3 PHILLIPS PAN HEAD #3 PHILLIPS PAN HEAD0.180 0.118 0.1180.392 0.448 0.448YES YES YESYES YES YESROUND 3 GALVALUME ROUND 2 GALVALUME ROUND 2 GALVALUMESQUARE 3 GALVALUME SQUARE 3 GALVALUMEROUND 3 PLASTICREQUIRED REQUIRED REQUIREDACCUFAST STAND-UP TOOL (OPTIONAL) ACCUDRIVE XL PLUS (OPTIONAL) ACCUDRIVE XL PLUS (OPTIONAL)544 728 6061292 1104 1410YES YES YESFM FM, METRO-DADE COUNTY FMYES YES YESX413

Roof Fasteners: Wood Decks1. COMPANY NAME ITW BUILDEX JOHNS MANVILLE INTERNATIONAL INC.2. PRODUCT NAME HEXTRA PLUS ULTRAFAST/HEX HEAD3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation AttachmentXBuilt-Up MembranesXSingle-Ply Membranes5. MATERIAL TYPE CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE CLIMASEAL CLIMASEAL7. SHANK TYPE MODIFIED STANDARD THREAD MODIFIED BUTTRESS THREAD8. POINT TYPE X-POINT SELF-DRILLING X-POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.215 2-1/4 1-3/4 1/2 1/2 0.215 1-5/8 5/8 1 10.215 2-7/8 2-3/8 1/2 1/2 0.215 2-1/4 1-1/4 1 10.215 3-1/4 2-3/4 1/2 1/2 0.215 2-7/8 1-7/8 1 10.215 3-3/4 3-1/4 1/2 1/2 0.215 3-1/4 2-1/4 1 10.215 4-3/8 3-3/8 1/2 1/2 0.215 3-3/4 2-3/4 1 10.215 5 4-1/2 1/2 1/2 0.215 4-3/8 3-3/8 1 10.215 6 5-1/2 1/2 1/2 0.215 5 4 1 10.215 7 6-1/2 1/2 1/2 0.215 6 5 1 10.215 8 7-1/2 1/2 1/2 0.215 7 6 1 10.215 8 7 1 111. HEAD SHAPE 1/4-IN. HEX HEAD 1/4-IN. HEX HEAD12. HEAD DIMENSIONS (inches)Thickness 0.180 0.180Diameter 0.392 0.39213. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME SQUARE 3 X 3 CARBON STEEL W/GALVALUMEROUND MANVILLE 3 POLYOLEFINLOCKING PLATE15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)OPTIONAL (ACCUDRIVE)Special Tool Needed (optional/required)ACCUFAST STAND-UP TOOL (OPTIONAL)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 544 5442-inch pine plank 1292 129217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM, UL, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable414

Roof Fasteners: Wood DecksJOHNS MANVILLE INTERNATIONAL INC. NATIONAL NAIL CORPORATION NATIONAL NAIL CORPORATIONULTRA GRIP PHILLIPS HEAD #12 R/S ROUND-TOP ROUND-TOP MASONRYU.S. U.S. U.S.X X XXXXXHARDENED CARBON STEEL CARBON STEEL HIGH CARBON STEELSPEX NATIONAL NAIL CORPORATION NATIONAL NAIL CORPORATIONMODIFIED BUTTRESS THREAD ANULAR THREADED FLUTEDSELF-DRILLING X-POINT DIAMOND DIAMONDTHREADED THREADED FRICTION THREADED FRICTION0.215 1-5/8 5/8 1 1 0.990 3/4 1/8 1 1 0.164 5/8 1/8 1/2 10.215 2-1/4 1-1/4 1 1 0.990 7/8 1/8 1 1 0.164 3/4 1/8 1/2 10.215 2-7/8 1-7/8 1 1 0.990 1 1/8 1 1 0.164 7/8 1/8 1/2 10.215 3-1/4 2-1/4 1 1 0.990 1-1/4 1/2 1 1 0.164 1 1/2 1/2 10.215 3-3/4 2-3/4 1 1 0.990 1-1/2 3/4 1 1 0.164 1-1/4 3/4 1/2 10.215 4-3/8 3-3/8 1 1 0.990 1-3/4 1 1 1 0.164 1-1/2 1 1/2 10.215 5 4 1 1 0.990 2 1-1/4 1 1 0.164 1-3/4 1-1/4 1/2 10.215 6 5 1 1 0.990 2-1/2 1-3/4 1 1 0.164 2 1-1/2 1/2 10.215 7 6 1 1 0.990 3 2-1/4 1 1 0.164 2-1/2 2 1/2 10.215 8 7 1 1 0.164 3 2-1/2 1/2 10.164 3-1/2 3 1/2 10.164 4 3-1/2 1/2 1#3 PHILLIPS ROUND ROUND0.118 0.045 0.0450.448 1.00 1.00YES NO NOYESSQUARE 3 X 3 CARBON STEEL W/ -- -- -- -- -- --GALVALUMEROUND MANVILLE 3 POLYOLEFINLOCKING PLATEREQUIREDOPTIONAL (ACCUDRIVE)HAMMER (REQUIRED)HAMMER (REQUIRED)544 -- --1292 -- --YES NO NOFM, UL, METRO-DADE COUNTY BOCA, ICBO BOCA, ICBONO YES YESX415

Roof Fasteners: Wood Decks1. COMPANY NAME NATIONAL NAIL CORPORATION NATIONAL NAIL CORPORATION2. PRODUCT NAME PLASTI-TOP PLASTI-CAP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE NA NA7. SHANK TYPE ANNULAR THREAD SPIRAL THREAD8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT THREADED FRICTION THREADED FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.990 3/4 1/8 1 1 0.110 3/4 1/8 1 10.990 7/8 1/8 1 1 0.110 7/8 1/8 1 10.990 1 1/8 1 1 0.110 1 1/8 1 10.990 1-1/4 1/2 1 1 0.110 1-1/4 1/2 1 10.990 1-1/2 3/4 1 1 0.110 1-1/2 3/4 1 10.990 1-3/4 1 1 1 0.110 1-3/4 1 1 10.990 2 1-1/4 1 1 0.110 2 1-1/4 1 10.990 2-1/2 1-3/4 1 1 0.110 2-1/2 1-3/4 1 10.990 3 2-1/4 1 1 0.110 3 2-1/4 1 111. HEAD SHAPE ROUND OCTAGON12. HEAD DIMENSIONS (inches)Thickness 0.060 0.060Diameter 1.00 1.0013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no)14. PLATE SHAPE / DIMENSIONS (inches) / MATERIAL-- -- -- -- -- --15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other HAMMER (REQUIRED) HAMMER (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood -- --2-inch pine plank -- --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO BOCA, ICBO18. ACCEPTED BY THE FOLLOWING CODES BOCA, ICBO YES19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES X20. SEE APPENDIX IF CHECKED XNA = not applicable416

Roof Fasteners: Wood DecksOLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUPOLYMPIC FASTENER STD #12 OLYMPIC FASTENER STD #12 OLYMPIC FASTENER HD #14 (C STEEL)U.S. U.S. U.S.X X XX X XX X XHARDENED CARBON STEEL STAINLESS STEEL, SPECIAL 400-SERIES BLEND HARDENED CARBON STEELCR-10 FLUOROCARBON CR-10 FLUOROCARBON CR-10 FLUOROCARBONTHREADED THREADED THREADEDPINCH, SELF-DRILLING; GIMLET; OR TAPEX PINCH, SELF-DRILLING PINCH, SELF-DRILLING OR TAPEXTHREADED THREADED THREADED0.160 1-5/8 5/8 1/2 1 0.168 1-5/8 5/8 1/2 1 0.190 1-1/4 3/4 1/2 10.160 2-1/4 1-1/4 1/2 1 0.168 2-1/4 1-1/4 1/2 1 0.190 1-3/4 1-1/4 1/2 10.160 2-7/8 1-7/8 1/2 1 0.168 2-7/8 2-3/8 1/2 1 0.190 2 1-1/2 1/2 10.160 3-1/4 2-1/4 1/2 1 0.168 3-1/4 2-1/4 1/2 1 0.190 3 2-1/2 1/2 10.160 3-3/4 2-3/4 1/2 1 0.168 3-3/4 2-3/4 1/2 1 0.190 4 3-1/2 1/2 10.160 4-1/2 3-1/2 1/2 1 0.168 4-1/2 3-1/2 1/2 1 0.190 5 4-1/2 1/2 10.160 5 4 1/2 1 0.168 5 4 1/2 1 0.190 6 5-1/2 1/2 10.160 6 5 1/2 1 0.168 6 5 1/2 1 0.190 7 6-1/2 1/2 10.160 7 6 1/2 1 0.168 7 6 1/2 1 0.190 8 7-1/2 1/2 10.160 8 7 1 /2 1 0.168 8 7 1 /2 1 0.190 9 8-1/2 1/2 10.190 10 9-1/2 1/2 10.190 12 11-1/2 1/2 10.190 14 13-1/2 1/2 10.190 16 15-1/2 1/2 10.201 17 16-1/2 1/2 10.201 18 17-1/2 1/2 10.201 20 19-1/2 1/2 10.201 21 19-1/2 1/2 10.201 22 21-1/2 1/2 10.201 24 23-1/2 1/2 1ROUND TRUSS, #3 PHILLIPS, OR HEX HEAD ROUND TRUSS, #3 PHILLIPS ROUND TRUSS, #3 PHILLIPS0.110 0.110 0.1100.435 0.435 0.435YES YES YESYES YES YESROUND 2 STEEL ROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEELROUND 2 PLASTIC ROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 2 STAINLESS STEEL ROUND 2 PLASTIC ROUND 2 PLASTICROUND 3 STEEL ROUND 2 PLASTIC ROUND 2 PLASTICROUND 3 PLASTIC ROUND 3 STEEL ROUND 3 STEELROUND 3 STAINLESS STEEL ROUND 3 PLASTIC ROUND 3 PLASTICROUND 3-1/2 STEEL ROUND 3-1/2 STEEL ROUND 3-1/2 STEELREQUIRED REQUIRED REQUIREDOPTIONAL OPTIONAL OPTIONAL531 531 590735 735 820YES YES YESFM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTYYES YES YESX X X417

Roof Fasteners: Wood Decks1. COMPANY NAME OLYMPIC MANUFACTURING GROUP POWERS FASTENERS, INC.2. PRODUCT NAME OLYMPIC FASTENER HD #14 (S.STEEL) POWERS RAWL #14 DECK SCREW3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE STAINLESS STEEL, SPECIAL 400-SERIES BLEND CASE HARDENED CARBON STEEL6. COATING TYPE CR-10 FLUOROCARBON PERMA-SEAL FLUOROPOLYMER7. SHANK TYPE THREADED SPIRAL THREAD8. POINT TYPE PINCH, SELF-DRILLING DRILL TYPE9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.190 1-1/4 3/4 1/2 1 0.238 1-5/8 1-3/8 1/4 --0.190 1-3/4 1-1/4 1/2 1 0.238 2-1/4 2-5/8 1/4 --0.190 2 1-1/2 1/2 1 0.238 2-7/8 3-1/2 1/4 --0.190 3 2-1/2 1/2 1 0.238 3-3/4 4 1/4 --0.190 4 3-1/2 1/2 1 0.238 4-1/2 4-1/4 1/4 --0.190 5 4-1/2 1/2 1 0.238 5 4-3/4 1/4 --0.190 6 5-1/2 1/2 1 0.238 6 5-3/4 1/4 --0.190 7 6-1/2 1/2 1 0.238 7 6-3/4 1/4 --0.190 8 7-1/2 1/2 1 0.238 8 7-3/4 1/4 --0.190 9 8-1/2 1/2 1 0.238 9 8-3/4 1/4 --0.190 10 9-1/2 1/2 1 0.238 10 9-3/4 1/4 --0.190 12 11-1/2 1/2 1 0.238 11 10-3/4 1/4 --0.190 14 13-1/2 1/2 1 0.238 12 11-3/4 1/4 --0.190 16 15-1/2 1/2 10.201 17 16-1/2 1/2 10.201 18 17-1/2 1/2 10.201 20 19-1/2 1/2 10.201 21 19-1/2 1/2 10.201 22 21-1/2 1/2 10.201 24 23-1/2 1/2 111. HEAD SHAPE ROUND TRUSS, #3 PHILLIPS PHILLIPS FLAT TRUSS HEAD #3 RECESS12. HEAD DIMENSIONS (inches)Thickness 0.110 0.118Diameter 0.435 0.44813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STAINLESS STEEL ROUND BARBED 2 GALVALUMEROUND 3 STAINLESS STEEL ROUND 3 GALVALUMEROUND 2 PLASTIC ROUND 3 STAINLESS STEELROUND 2 PLASTIC ROUND 3 PLASTICROUND 3 STEELROUND 3 PLASTICROUND 3-1/2 STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL STAND-UP TOOL (OPTIONAL)Special Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 590 7302-inch pine plank 820 --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, UL, ICBO, METRO-DADE COUNTY FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable418

Roof Fasteners: Wood DecksPOWERS FASTENERS, INC. POWERS FASTENERS, INC. POWERS FASTENERS, INC.POWERS RAWL WOODIE POWERS RAWL #12 DECK SCREW POWERS RAWL #15 DECK SCREWU.S. U.S. U.S.X X XXXXZAMAC ALLOY CASE HARDENED STEEL CASE HARDENED CARBON STEELGALVALUME PERMA-SEAL FLUOROPOLYMER PERMA-SEAL FLUOROPOLYMERTAPERED/THREADED (SPECIAL DESIGN) SPIRAL THREAD SPIRAL THREADSELF-DRILLING RICOH "S" POINT/DRILL TYPE RICOH "S" POINTTHREADED THREADED THREADED0.490 1-3/4 1/8 3/4 -- 0.226 1-5/8 1-3/8 1/4 -- 0.264 1-1/4 1 1/4 --0.490 2-1/2 3/4 3/4 -- 0.226 2-1/4 2 1/4 -- 0.264 2 1-3/4 1/4 --0.490 3-1/4 1-1/2 3/4 -- 0.226 2-7/8 2-5/8 1/4 -- 0.264 3 2-3/4 1/4 --0.490 4 2-1/4 3/4 -- 0.226 3-1/4 3 1/4 -- 0.264 4 3-3/4 1/4 --0.490 4-3/4 3 3/4 -- 0.226 3-3/4 3-1/2 1/4 -- 0.264 5 4-3/4 1/4 --0.226 4-1/2 4-1/4 1/4 -- 0.264 6 5-3/4 1/4 --0.226 5 4-3/4 1/4 -- 0.264 7 6-3/4 1/4 --0.226 6 5-3/4 1/4 -- 0.264 8 7-3/4 1/4 --0.226 7 6-3/4 1/4 -- 0.264 10 9-3/4 1/4 --0.226 8 7-3/4 1/4 -- 0.264 12 11-3/4 1/4 --0.264 14 13-3/4 1/4 --0.264 16 15-3/4 1/4 --FLAT, SQUARE DRIVE RECESS PHILLIPS TRUSS HEAD #3 RECESS WASHER / 1/4-IN HEX HEAD PHILLIPS TRUSS HEAD #3 RECESS0.073 0.130 / 0.140 0.1300.600 0.448 / 0.385 0.448YES YES YESYES YES YESROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUMEROUND BARBED 3 GALVALUME ROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3 PLASTIC ROUND 3 PLASTICREQUIRED REQUIRED REQUIREDSTAND-UP TOOL (OPTIONAL)STAND-UP TOOL (OPTIONAL)SQUARE DRIVER (INCLUDED)591 710 720-- -- --YES YES YESFM FM FMYES YES YESXX419

Roof Fasteners: Wood Decks1. COMPANY NAME POWERS FASTENERS, INC. SENCO PRODUCTS, INC.2. PRODUCT NAME POWERS RAWL SPEED-LOCK TOGGLE SENCO BASE TAPE SYSTEM3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation AttachmentXBuilt-Up Membranes X XSingle-Ply MembranesX5. MATERIAL TYPE CARBON STEEL & STAINLESS STEEL CLASS 1 GALVANIZED STEEL6. COATING TYPE PERMA-SEAL FLUOROPOLYMER (on carbon steel bolt only) SENCOTE PLASTIC POLYMER7. SHANK TYPE ANNULAR THREAD STAPLE-16 GA.8. POINT TYPE NA DIVERGENT9. METHOD OF ATTACHMENT THREADED MECHANICALLY ATTACHED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.250 5 3-1/2 1-1/2 -- 0.062 X 0.55 7/8 -- -- --0.250 6 4-1/2 1-1/2 --0.250 7 5-1/2 1-1/2 --0.250 8 6-1/2 1-1/2 --0.250 9 7-1/2 1-1/2 --0.250 10 8-1/2 1-1/2 --0.250 12 10-1/2 1-1/2 --0.250 14 12-1/2 1-1/2 --11. HEAD SHAPE PHILLIPS FLAT HEAD #3 RECESS STAPLE12. HEAD DIMENSIONS (inches)Thickness 0.042Diameter 0.42613. PLATESRequired (yes/no) YES NOAvailable From Manufacturer (yes/no)YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required)OPTIONALInstallation Tool With Screw Gun (optional/required)REQUIREDSpecial Tool Needed (optional/required)OtherROTARY DRILL WITH WOOD CUTTING BIT (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 7102-inch pine plank --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES NO18. ACCEPTED BY THE FOLLOWING CODES FM ICBO19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES NO20. SEE APPENDIX IF CHECKED XNA = not applicable420

Roof Fasteners: Wood DecksSFS STADLER INC. SFS STADLER INC. SFS STADLER INC.INSUL-FIXX #12-11 INSUL-FIXX #14-10 SYSTEM ESI #14-10U.S. U.S. U.S.X X XX X XX X XHARDENED STEEL HARDENED STEEL HARDENED STEELTUFF-TITE II TUFF-TITE II TUFF TITE IISPIRAL THREAD SPIRAL THREAD SPIRAL THREADDRILL POINT DRILL POINT DRILL POINTTHREADED THREADED THREADED0.172 1-5/8 1-1/8 1/2 1 0.190 1-1/4 3/4 1/2 1 0.190 2 1 1/2 10.172 2-1/4 1-3/4 1/2 1 0.190 2 1-1/2 1/2 1 0.190 3 2 1/2 10.172 2-7/8 2-3/8 1/2 1 0.190 3 2-1/2 1/2 1 0.190 4 3 1/2 10.172 3-1/4 2-3/4 1/2 1 0.190 4 3-1/2 1/2 1 0.190 5 4 1/2 10.172 3-3/4 3-1/4 1/2 1 0.190 5 4-1/2 1/2 1 0.190 6 5 1/2 10.172 4-1/2 4 1/2 1 0.190 6 5-1/2 1/2 1 0.190 7 6 1/2 10.172 5 4-1/2 1/2 1 0.190 7 6-1/2 1/2 1 0.190 8 7 1/2 10.172 6 5-1/2 1/2 1 0.190 8 7-1/2 1/2 1 0.190 10 9 1/2 10.172 7 6-1/2 1/2 1 0.190 10 9-1/2 1/2 1 0.190 12 11 1/2 10.172 8 7-1/2 1/2 1 0.190 12 11-1/2 1/2 10.190 14 13-1/2 1/2 10.190 16 15-1/2 1/2 10.201 18 17-1/2 1/2 10.201 20 19-1/2 1/2 10.201 22 21-1/2 1/2 10.201 24 23-1/2 1/2 10.201 26 25-1/2 1/2 1ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS0.103 0.103 0.1030.425 0.425 0.425YES YES YESYES YES YESROUND 3 POLYETHYLENE ROUND 3 POLYETHYLENE ROUND 3 POLYETHYLENEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 NYLON WITH GLASSROUND 2 GALVALUMEREQUIRED REQUIRED REQUIREDOPTIONALOPTIONAL630 691 691756 819 819YES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YESX X X421

Roof Fasteners: Wood Decks1. COMPANY NAME SFS STADLER INC. SFS STADLER INC.2. PRODUCT NAME SYSTEM ES L #14-10 SYSTEM ES I #12-113. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED STEEL HARDENED STEEL6. COATING TYPE TUFF TITE II TUFF TITE II7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE DRILL POINT DRILL POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.190 2 1 1/2 1 0.172 2-1/4 1-3/4 1/2 10.190 3 2 1/2 1 0.172 2-7/8 2-3/8 1/2 10.190 4 3 1/2 1 0.172 3-1/4 2-3/4 1/2 10.190 5 4 1/2 1 0.172 3-3/4 2-1/4 1/2 10.190 6 5 1/2 1 0.172 4-1/2 4 1/2 10.190 7 6 1/2 1 0.172 5 4-1/2 1/2 10.190 8 7 1/2 1 0.172 6 5-1/2 1/2 10.190 10 9 1/2 1 0.172 7 5-1/2 1/2 10.190 12 11 1/2 1 0.172 8 7-1/2 1/2 111. HEAD SHAPE ROUND WITH #3 PHILLIPS TRUSS ROUND WITH #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.103 0.103Diameter 0.425 0.42513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 NYLON WITH GLASS ROUND 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required) OPTIONAL OPTIONALOther16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 691 6302-inch pine plank 819 75617. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable422

Roof Fasteners: Wood DecksSFS STADLER INC. SFS STADLER INC. SFS STADLER INC.ISOFAST IG-M ISOFAST IW-T-M EXTRA LOAD FASTENER HDU.S. U.S. U.S.X X XX X XX X XCARBON STEEL CARBON STEEL HARDENED STEELTUFF TITE II TUFF TITE II TUFF TITE IITHREADED THREADED THREADEDGIMLET GIMLET DRILL POINTTHREADED THREADED THREADED0.236 2-1/4 1 1-1/4 1-1/4 0.196 1-5/8 1-3/4 1 1 0.205 1-1/4 3/4 1/2 1/20.236 2-3/4 1-1/2 1-1/4 1-1/4 0.196 2-3/4 3/8 1 1 0.205 2 1 1/2 1/20.236 3-1/8 1-7/8 1-1/4 1-1/4 0.205 3 2 1/2 1/20.236 3-7/8 2-5/8 1-1/4 1-1/4 0.205 4 3 1/2 1/20.236 4-3/4 3-1/2 1-1/4 1-1/4 0.205 5 4 1/2 1/20.236 5-1/2 4-1/4 1-1/4 1-1/4 0.205 6 5 1/2 1/20.236 6-1/4 5 1-1/4 1-1/4 0.205 8 7 1/2 1/20.205 10 9 1/2 1/20.205 12 11 1/2 1/20.205 12 11 1/2 1/20.205 14 13 1/2 1/20.205 16 15 1/2 1/25/16 HEX HEAD COUNTERSUNK POSI-DRIVE #2 ROUND WITH #3 PHILLIPS TRUSS0.156 0.156 0.1030.406 0.406 0.425YES YES YESYES YES YESOVAL 3-1/4 X 1-5/8 GALVALUME OVAL 3-1/4 X 1-5/8 GALVALUME ROUND 3 GALVALUMESQUARE 2-3/4 X 2-3/4 GALVALUME SQUARE 2-3/4 X 2-3/4 GALVALUME ROUND 2 GALVALUMEDOMEDCONVEX 3-1/4 X 1-5/8 GALVALUMEREQUIRED REQUIRED REQUIREDREQUIRED REQUIRED OPTIONALREQUIREDREQUIRED545 445 8851100 880 1200YES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE CONTYYES YES YESX X X423

Roof Fasteners: Wood Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME ORIGINAL ROUND METAL CAP AG/RL ORIGINAL ROUND METAL CAP AG/EYD3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE RUST-LOK ELECTRO GALVANIZED YELLOW DISHROMATE7. SHANK TYPE ANNULAR GROOVED ANNULAR GROOVED8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT THREADED FRICTION THREADED FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.106 1/2 1/16 1/4 1/2 0.106 1/2 1/16 1/4 1/20.106 5/8 1/16 1/4 5/8 0.106 5/8 1/16 1/4 5/80.106 3/4 1/16 1/4 5/8 0.106 3/4 1/16 1/4 5/80.106 7/8 1/16 1/4 7/8 0.106 7/8 1/16 1/4 7/80.106 1 1/16 1/4 1 0.106 1 1/16 1/4 10.106 1-1/4 1/4 1/4 1 0.106 1-1/4 1/4 1/4 10.120 1-1/2 1/2 1/4 1 0.120 1-1/2 1/2 1/4 10.120 1-3/4 3/4 1/4 1 0.120 1-3/4 3/4 1/4 10.120 2 1 1/4 1 0.120 2 1 1/4 10.120 2-1/2 1-1/2 1/4 1 0.120 2-1/2 1-1/2 1/4 10.120 3 2 1/4 1 0.120 3 2 1/4 111. HEAD SHAPE ROUND ROUND12. HEAD DIMENSIONS (inches)Thickness 0.037 0.037Diameter 1.000 1.00013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) NO NOInstallation Tool With Screw Gun (optional/required) NO NOSpecial Tool Needed (optional/required) NO NOOtherMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 224 2242-inch pine plank 190 19017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO NO18. ACCEPTED BY THE FOLLOWING CODES APA, FFN-105B APA, FFN-105B19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable424

Roof Fasteners: Wood DecksSIMPLEX SIMPLEX SIMPLEXORIGINAL ROUND METAL CAP AG/B ORIGINAL ROUND METAL CAP B/RL ORIGINAL ROUND METAL CAP B/EGYDU.S. U.S. U.S.X X XX X XX X XCARBON STEEL CARBON STEEL CARBON STEELBRIGHT FINISH RUST-LOK YELLOW DICHROMATEANNULAR GROOVED BARBED BARBEDDIAMOND DIAMOND DIAMONDTHREADED FRICTION FRICTION FRICTION0.106 1/2 1/16 1/4 1/2 0.106 1/2 1/16 1/4 1/2 0.106 1/2 1/16 1/4 1/20.106 5/8 1/16 1/4 5/8 0.106 5/8 1/16 1/4 5/8 0.106 5/8 1/16 1/4 5/80.106 3/4 1/16 1/4 5/8 0.106 3/4 1/16 1/4 5/8 0.106 3/4 1/16 1/4 5/80.106 7/8 1/16 1/4 7/8 0.106 7/8 1/16 1/4 7/8 0.106 7/8 1/16 1/4 7/80.106 1 1/16 1/4 1 0.106 1 1/16 1/4 1 0.106 1 1/16 1/4 10.106 1-1/4 1/4 1/4 1 0.106 1-1/4 1/4 1/4 1 0.106 1-1/4 1/4 1/4 10.120 1-1/2 1/2 1/4 1 0.120 1-1/2 1/2 1/4 1 0.120 1-1/2 1/2 1/4 10.120 1-3/4 3/4 1/4 1 0.120 1-3/4 3/4 1/4 1 0.120 1-3/4 3/4 1/4 10.120 2 1 1/4 1 0.120 2 1 1/4 1 0.120 2 1 1/4 10.120 2-1/2 1-1/2 1/4 1 0.120 2-1/2 1-1/2 1/4 1 0.120 2-1/2 1-1/2 1/4 10.120 3 2 1/4 1 0.120 3 2 1/4 1 0.120 3 2 1/4 1ROUND ROUND ROUND0.037 0.037 0.0371.000 1.000 1.000NO NO NOYES YES YESPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUMENO NO NONO NO NONO NO NOMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER224 99 99190 67 67NO NO NOAPA, FFN-105B APA, FFN-105B APA, FFN-105BYES YES YESX X X425

Roof Fasteners: Wood Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME ORIGINAL ROUND METAL CAP B/B INSULATION ROUND METAL CAP AG/RL3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE BRIGHT FINISH RUST-LOK7. SHANK TYPE BARBED ANNULAR GROOVED8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT FRICTION THREADED FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.106 1/2 1/16 1/4 1/2 0.120 3 2 1/4 10.106 5/8 1/16 1/4 5/8 0.120 3-1/2 2-1/2 1/4 10.106 3/4 1/16 1/4 5/8 0.120 4 3 1/4 10.106 7/8 1/16 1/4 7/8 0.120 5 4 1/4 10.106 1 1/16 1/4 1 0.120 6 5 1/4 10.106 1-1/4 1/4 1/4 1 0.120 7 6 1/4 10.120 1-1/2 1/2 1/4 1 0.120 8 7 1/4 10.120 1-3/4 3/4 1/4 10.120 2 1 1/4 10.120 2-1/2 1-1/2 1/4 10.120 3 2 1/4 111. HEAD SHAPE ROUND ROUND12. HEAD DIMENSIONS (inches)Thickness 0.037 0.037Diameter 1.000 1.00013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) NO NOInstallation Tool With Screw Gun (optional/required) NO NOSpecial Tool Needed (optional/required) NO NOOtherMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 99 2242-inch pine plank 67 27317. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO NO18. ACCEPTED BY THE FOLLOWING CODES APA, FFN-105B APA, FFN-105B19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable426

Roof Fasteners: Wood DecksSIMPLEX SIMPLEX SIMPLEXINSULATION ROUND METAL CAP AG/EGYD INSULATION ROUND METAL CAP AG/B INSULATION ROUND METAL CAP B/RLU.S. U.S. U.S.X X XX X XX X XCARBON STEEL CARBON STEEL CARBON STEELELECTRO GALVANIZED YELLOW DICHROMATE BRIGHT FINISH RUST-LOKANNULAR GROOVED ANNULAR GROOVED BARBEDDIAMOND DIAMOND DIAMONDTHREADED FRICTION THREADED FRICTION FRICTION0.120 3 2 1/4 1 0.120 3 2 1/4 1 0.120 3 2 1/4 10.120 3-1/2 2-1/2 1/4 1 0.120 3-1/2 2-1/2 1/4 1 0.120 3-1/2 2-1/2 1/4 10.120 4 3 1/4 1 0.120 4 3 1/4 1 0.120 4 3 1/4 10.120 5 4 1/4 1 0.120 5 4 1/4 1 0.120 5 4 1/4 10.120 6 5 1/4 1 0.120 6 5 1/4 1 0.120 6 5 1/4 10.120 7 6 1/4 1 0.120 7 6 1/4 1 0.120 7 6 1/4 10.120 8 7 1/4 1 0.120 8 7 1/4 1 0.120 8 7 1/4 1ROUND ROUND ROUND0.037 0.037 0.0371.000 1.000 1.000NO NO NOYES YES YESPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUMENO NO NONO NO NONO NO NOMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER224 224 99273 273 92NO NO NOAPA, FFN-105B APA, FFN-105B APA, FFN-105BYES YES YESX X X427

Roof Fasteners: Wood Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME INSULATION ROUND METAL CAP B/EGYD INSULATION ROUND METAL CAP B/B3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE ELECTRO GALVANIZED YELLOW DICHROMATE BRIGHT FINISH7. SHANK TYPE BARBED BARBED8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT FRICTION FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.120 3 2 1/4 1 0.120 3 2 1/4 10.120 3-1/2 2-1/2 1/4 1 0.120 3-1/2 2-1/2 1/4 10.120 4 3 1/4 1 0.120 4 3 1/4 10.120 5 4 1/4 1 0.120 5 4 1/4 10.120 6 5 1/4 1 0.120 6 5 1/4 10.120 7 6 1/4 1 0.120 7 6 1/4 10.120 8 7 1/4 1 0.120 8 7 1/4 111. HEAD SHAPE ROUND ROUND12. HEAD DIMENSIONS (inches)Thickness 0.037 0.037Diameter 1.000 1.00013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) NO NOInstallation Tool With Screw Gun (optional/required) NO NOSpecial Tool Needed (optional/required) NO NOOtherMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 99 992-inch pine plank 92 9217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO NO18. ACCEPTED BY THE FOLLOWING CODES APA, FFN-105B APA, FFN-105B19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable428

Roof Fasteners: Wood DecksSIMPLEX SIMPLEX SIMPLEXINSULATION ROUND METAL CAP B/EGYD SQUARE HEAD METAL CAP B/B ECONOMY ROUND METAL CAP B/BU.S. U.S. U.S.X X XX X XX X XCARBON STEEL CARBON STEEL CARBON STEELELECTRO GALVANIZED YELLOW DICHROMATE BRIGHT FINISH BRIGHT FINISHBARBED BARBED BARBEDDIAMOND DIAMOND DIAMONDFRICTION FRICTION FRICTION0.106 3/4 1/16 1/4 3/4 0.106 3/4 1/16 1/4 3/4 0.106 1/2 1/16 1/4 1/20.106 7/8 1/16 1/4 7/8 0.106 7/8 1/16 1/4 7/8 0.106 5/8 1/16 1/4 5/80.106 1 1/16 1/4 1 0.106 1 1/16 1/4 1 0.106 3/4 1/16 1/4 5/80.106 1-1/4 1/4 1/4 1 0.106 1-1/4 1/4 1/4 1 0.106 7/8 1/16 1/4 7/80.106 1-1/2 1/2 1/4 1 0.106 1-1/2 1/2 1/4 1 0.106 1 1/16 1/4 10.106 1-3/4 3/4 1/4 1 0.106 1-3/4 3/4 1/4 1 0.106 1-1/4 1/4 1/4 10.120 1-1/2 1/2 1/4 10.120 1-3/4 3/4 1/4 10.120 2 1 1/4 10.120 2-1/2 1-1/2 1/4 10.120 3 2 1/4 1ROUND ROUND ROUND0.037 0.037 0.0371.000 1.000 1.000NO NO NOYES YES YESPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUMENO NO NONO NO NONO NO NOMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER99 99 99113 113 92NO NO NOAPA, FFN-105B APA, FFN-105B APA, FFN-105BYES YES YESX X X429

Roof Fasteners: Wood Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME FLEX-CAP PLASTIC CAP AG/RL FLEX-CAP PLASTIC CAP AG/EGYD3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL/HIGH DENSITY POLYTHEYLENE PLASTIC CARBON STEEL/HIGH DENSITY POLYETHYLENE PLASTIC6. COATING TYPE RUST-LOK ELECTRO GALVANIZED YELLOW DICHROMATE7. SHANK TYPE ANNULAR GROOVED ANNULAR GROOVED8. POINT TYPE DIAMOND DIAMOND9. METHOD OF ATTACHMENT THREADED FRICTION THREADED FRICTION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.099 3/4 1/16 1/4 3/4 0.099 3/4 1/16 1/4 3/40.099 7/8 1/16 1/4 7/8 0.099 7/8 1/16 1/4 7/80.099 1 1/16 1/4 1 0.099 1 1/16 1/4 10.099 1-1/4 1/4 1/4 1 0.099 1-1/4 1/4 1/4 10.099 1-1/2 1/2 1/4 1 0.099 1-1/2 1/2 1/4 10.099 1-3/4 3/4 1/4 1 0.099 1-3/4 3/4 1/4 10.106 2 1 1/4 1 0.106 2 1 1/4 10.106 2-1/2 1-1/2 1/4 1 0.106 2-1/2 1-1/2 1/4 10.106 3 2 1/4 1 0.106 3 2 1/4 111. HEAD SHAPE ROUND ROUND12. HEAD DIMENSIONS (inches)Thickness 0.125 0.125Diameter 1.000 1.00013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) NO NOInstallation Tool With Screw Gun (optional/required) NO NOSpecial Tool Needed (optional/required) NO NOOtherMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER MAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 72 722-inch pine plank 72 7217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) NO NO18. ACCEPTED BY THE FOLLOWING CODES APA, FFN-105B APA, FFN-105B19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable430

Roof Fasteners: Wood DecksSIMPLEX SIMPLEX TRU-FAST CORPORATIONFLEX-CAP PLASTIC CAP AG/B COIL ROOFING NAILS HD DRILL POINT STAINLESS STEELU.S. U.S. U.S.X X XX X XX X XCARBON STEEL/HIGH DENSITY POLYETHYLENE PLASTIC CARBON STEEL STAINLESS STEEL (TRIMRITE ALLOY #S-42010)BRIGHT FINISH ELECTRO GALVANIZED NAANNULAR GROOVED SMOOTH THREADEDDIAMOND DIAMOND DOUBLE FLUTE SELF-DRILLINGTHREADED FRICTION FRICTION THREADED0.099 3/4 1/16 1/4 3/4 0.135 7/8 1/16 1/4 7/8 0.180 1-1/2 1 1 10.099 7/8 1/16 1/4 7/8 0.135 1 1/8 1/4 1 0.180 2 1-1/2 1 10.099 1 1/16 1/4 1 0.135 1-1/4 1/4 1/4 1 0.180 3 2-1/2 1 10.099 1-1/4 1/4 1/4 1 0.135 1-1/2 1/2 1/4 1 0.180 4 3-1/2 1 10.099 1-1/2 1/2 1/4 1 0.135 1-3/4 3/4 1/4 1 0.180 5 4-1/2 1 10.099 1-3/4 3/4 1/4 1 0.180 6 5-1/2 1 10.106 2 1 1/4 1 0.180 7 6-1/2 1 10.106 2-1/2 1-1/2 1/4 1 0.180 8 7-1/2 1 10.106 3 2 1/4 1 0.180 10 9-1/2 1 10.180 12 11-1/2 1 1ROUND ROUND #10 TRUSS PHILLIPS #30.125 0.037 0.1051.000 0.250 0.440NO -- YESYES -- YESPARABOLIC 2 GALVALUME ROUND 1-3 GALVANIZED ROUND 2 GALVALUMEPARABOLIC 3 GALVALUME ROUND 2.4 GALVALUMEROUND 3 GALVALUMEROUND 3 PLASTICNO NO REQUIREDNO NO OPTIONALNOALL BRANDS OF PNEUMATIC NAIL GUNSMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMER72 60 49572 60 517NO NO YESAPA, FFN-105B NONE FM, METRO-DADE COUNTYYES X YESX431

Roof Fasteners: Wood Decks1. COMPANY NAME TRU-FAST CORPORATION TRU-FAST CORPORATION2. PRODUCT NAME TP DP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL C-1022 CARBON STEEL C-10226. COATING TYPE TRU-KOTE PC-3 (FLUOROCARBON PAINT) TRU-KOTE PC-3 (FLUOROCARBON PAINT)7. SHANK TYPE THREADED THREADED8. POINT TYPE GIMLET DOUBLE FLUTE SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / PLYWOOD DECKPENETRATION (inches) / WOOD DECK PENETRATION(inches)0.150 1-5/8 5/8 1 1 0.160 1-5/8 5/8 1 10.150 2-1/4 1-1/4 1 1 0.160 2-1/4 1-1/4 1 10.150 2-7/8 1-7/8 1 1 0.160 2-7/8 1-7/8 1 10.150 3-3/4 2-3/4 1 1 0.160 3-1/4 2-1/4 1 10.150 4-1/2 3-1/4 1 1 0.160 3-3/4 2-3/4 1 10.150 5 4 1 1 0.160 4-1/2 3-1/4 1 10.150 6 5 1 1 0.160 5 4 1 10.160 6 5 1 10.160 7 6 1 10.160 8 7 1 111. HEAD SHAPE #10 TRUSS PHILLIPS #3 #10 TRUSS PHILLIPS #312. HEAD DIMENSIONS (inches)Thickness 0.110 0.105Diameter 0.390 0.44013. PLATESRequired (yes/no) -- --Available From Manufacturer (yes/no) -- --14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 2.4 GALVALUME ROUND 2.4 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required) OPTIONAL OPTIONALSpecial Tool Needed (optional/required)Other16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3/4-inch plywood 636 5662-inch pine plank 938 124817. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I WOOD ROOF (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable432

Roof Fasteners: Wood DecksTRU-FAST CORPORATIONHD (HEAVY DUTY) #14U.S.XXXCARBON STEEL C-1022TRU-KOTE PC-3 (FLUOROCARBON PAINT)THREADEDDOUBLE FLUTE SELF-DRILLINGTHREADSU.S. INTECDRILL-TEC CTPU.SXXXCARBON STEELFLUOROPOLYMER PAINTTHREADEDTHREADED, SELF-TAPPINGMECHANICAL0.180 1-1/2 1/2 1 1 0.150 1-5/8 5/8 1 10.180 2 1 1 1 0.150 2-1/4 1-1/4 1 10.180 3 2 1 1 0.150 2-7/8 1-7/8 1 10.180 4 3 1 1 0.150 3-3/4 2-3/4 1 10.180 5 4 1 1 0.150 4-1/2 3-1/2 1 10.180 6 5 1 1 0.150 5 4 1 10.180 7 6 1 1 0.150 6 5 1 10.180 8 7 1 1 0.150 7 6 1 10.180 10 9 1 1 0.150 8 7 1 10.180 12 11 1 1TRUSS #3 PHILLIPSTRUSS #3 PHILLIPS0.105 0.1100.440 0.391YESYESYESYESROUND 2 GALVALUME ROUND 2.7 GALVALUMEROUND 2.4 GALVALUME ROUND 3 PLASTICROUND 3 GALVALUMEROUND 3 PLASTICREQUIREDOPTIONALREQUIREDOPTIONALOPTIONAL495 636517 938YESFM, METRO-DADE COUNTYYESYESFM, METRO-DADE COUNTYYES433

Roof Fasteners: Concrete DecksCOMPANY NAME CARLISLE SYNTEC CARLISLE SYNTEC INCORPORATED2. PRODUCT NAME HP FASTENER HP CONCRETE SPIKE3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL CARBON STEEL6. COATING TYPE EPOXY ELECTRODEPOSITION EPOXY ELECTRODEPOSITION7. SHANK TYPE SINGLE LEAD, BUTTRESS THREAD --8. POINT TYPE NA NA9. METHOD OF ATTACHMENT THREADED SHANK COMPRESSION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.240 1-1/2 1/4 1-1/40.180 1-3/4 1/2 1-1/4 0.240 2 3/4 1-1/40.180 2-1/4 1 1-1/4 0.240 2-1/2 1-1/4 1-1/40.180 2-3/4 1-1/2 1-1/4 0.240 3 1-3/4 1-1/40.180 3-1/4 2 1-1/4 0.240 3-1/2 2-1/4 1-1/40.180 4-1/4 3 1-1/4 0.240 4 2-3/4 1-1/40.180 5 3-3/4 1-1/4 0.240 4-1/2 3-1/4 1-1/40.180 6 4-3/4 1-1/4 0.240 5 3-3/4 1-1/40.240 5-1/2 4-1/4 1-1/40.240 6 4-3/4 1-1/40.240 6-1/2 5-1/4 1-1/40.240 7 5-3/4 1-1/40.240 7-1/2 6-1/4 1-1/40.240 8 6-3/4 1-1/40.240 8-1/2 7-1/4 1-1/40.240 9 7-3/4 1-1/40.240 9-1/2 8-1/4 1-1/40.240 10 8-3/4 1-1/40.240 10-1/2 9-1/4 1-1/40.240 11 9-3/4 1-1/40.240 12 10-3/4 1-1/40.240 13 11-3/4 1-1/40.240 12 10-3/4 1-1/40.240 12 10-3/4 1-1/40.240 12 10-3/4 1-1/411. HEAD SHAPE WAFER TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.150 0.110Diameter 0.430 0.44013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALSQUARE W/ROUNDEDSQUARE W/ROUNDEDCORNERS 2-7/8 GALVALUME CORNERS 2-7/8 GALVALUMEROUND 2 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME ROUND 2-3/8 GALVALUMEROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)SDS SPIKE HAMMER (OPTIONAL)OtherHAMMER (REQURIED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) -- --17. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable434

Roof Fasteners: Concrete DecksCARLISLE SYNTEC INC. CELOTEX CORP. CELOTEX CORP.HD 14-10 FASTENER ANCHORBOND #14 ANCHORBOND #15 HEAVY DUTYU.S.SU.S.X X XXXX X XCARBON STEEL HARDENED CARBON STEEL HARDENED CARBON STEELEPOXY ELECTRODEPOSITION ORGANIC FLUOROPOLYMERS ORGANIC FLUOROPOLYMERSSINGLE LEAD, V THREAD SPIRAL THREAD SPIRAL THREADSINGLE EDGE DRILL POINT SELF-DRILLING SELF-DRILLINGTHREADED THREADED THREADED.0190 2 1 1 0.238 1-1/4 1/4 1 0.238 1-1/4 1/4 1.0190 3 2 1 0.238 1-5/8 5/8 1 0.238 2 1 1.0190 4 3 1 0.238 1-7/8 1-1/4 1 0.238 3 2 1.0190 5 4 1 0.238 2-7/8 1-7/8 1 0.238 4 3 1.0190 6 5 1 0.238 3-1/4 2-1/4 1 0.238 5 4 1.0190 7 6 1 0.238 3-3/4 2-3/4 1 0.238 6 5 1.0190 8 7 1 0.238 4-1/2 3-1/2 1 0.238 7 5 1.0190 9 8 1 0.238 5 4 1 0.238 8 7 1.0190 10 9 1 0.238 6 5 1 0.238 10 9 1.0190 11 10 1 0.238 7 5 1 0.238 12 11 10.238 7 6 1 0.238 14 13 10.238 16 15 1TRUSS #3 PHILLIPS FLAT TRUSS #3 PHILLIPS FLAT TRUSS0.115 0.109 0.1090.435 0.438 0.438YES YES YESYES YES YESSQUARE W/ROUNDED HEXAGONAL 2-7/8 STAINLESS STEEL HEXAGONAL 2-7/8 STAINLESS STEELCORNERS 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUMEROUND 2 PLASTIC HEXAGONAL 3 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME HEXAGONAL 2 GALVALUMEROUND 3 PLASTICROUND 2-3/8 GALVALUMEREQUIRED REQUIRED REQUIREDHAMMER DRILL (REQUIRED)HAMMER DRILL (REQUIRED)-- 959 935YES YES YESFM FM FMYES YES YES435

Roof Fasteners: Concrete Decks1. COMPANY NAME CONSTRUCTION FASTENERS, INC. CONSTRUCTION FASTENERS, INC.2. PRODUCT NAME DEKFAST #14 DEKFAST #15 HI-STRENGTH3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE ORGANIC ORGANIC7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE SELF-DRILLING SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.238 1- 1/4 1/4 1 0.264 1-1/4 1/4 10.238 1- 5/8 5/8 1 0.264 2 1 10.238 2-1/4 1-1/4 1 0.264 3 2 10.238 2-7/8 1-7/8 1 0.264 4 3 10.238 3-1/4 2-1/4 1 0.264 5 4 10.238 3-3/4 2-3/4 1 0.264 6 5 10.238 4-1/2 3-1/2 1 0.264 7 6 10.238 5 4 1 0.264 8 7 10.238 6 5 1 0.264 10 9 10.238 7 6 1 0.264 12 11 10.238 8 7 1 0.264 14 13 10.238 10 9 1 0.264 16 15 10.238 12 11 1 0.264 18 17 10.264 20 19 10.264 22 21 10.264 24 23 111. HEAD SHAPE #3 PHILLIPS FLAT TRUSS #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.109 0.109Diameter 0.438 0.43813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEXAGONAL 2-7/8 GALVALUME HEXAGONAL 2-7/8 GALVALUMEHEXAGONAL 3 PLASTIC ROUND 2 GALVALUMEROUND 2 GALVALUME ROUND 2-1/2 GALVALUMEROUND 2 NYLON15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other HAMMER DRILL (REQUIRED) HAMMER DRILL (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 784 85017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable436

Roof Fasteners: Concrete DecksCONSTRUCTION FASTENERS, INC. DURO LAST INC. FIRESTONE BUILDING PRODUCTSDEKSPIKE DURO LAST SCREWS #14 FIRESTONE HEAVY DUTYU.S. U.S. U.S.X X XXX X XHARDENED CARBON STEEL STEEL SAE 1022, HEAT TREATEDORGANIC FLUOROCARBON EPOXYFORMED SHANK SPIRAL THREAD BUTTRESS THREADN/A SELF-DRILLING DRILL POINTFRICTION THREADED THREADED0.250 1-1/4 1/8 1-1/8 0.190 1-3/4 3 /4 1 0.264 1-1/4 1/4 10.250 1-1/2 1/4 1-1/4 0.190 2 1 1 0.264 2 1 10.250 2 3/4 1-1/4 0.190 2-1/5 1-1/5 1 0.264 3 2 10.250 2-1/2 1-1/4 1-1/4 0.190 3 2 1 0.264 4 3 10.250 3 1-3/4 1-1/4 0.190 3-1/5 2-1/5 1 0.264 5 4 10.250 3-1/2 2-1/4 1-1/4 0.190 4 3 1 0.264 6 5 10.250 4 2-3/4 1-1/4 0.190 4-1/5 3-1/5 1 0.264 7 6 10.250 4-1/2 3-1/4 1-1/4 0.190 5 4 1 0.264 8 7 10.250 5 3-3/4 1-1/4 0.190 5-1/5 4-1/5 1 0.264 10 9 10.250 5-1/2 4-1/4 1-1/4 0.190 6 5 1 0.264 12 11 10.250 6 4-3/4 1-1/4 0.190 7 6 1 0.264 14 13 10.250 6-1/2 5-1/4 1-1/4 0.190 8 7 10.250 7 5-3/4 1-1/4 0.190 9 8 10.250 7-1/2 6-1/4 1-1/4 0.190 10 9 10.250 8 6-3/4 1-1/4 0.190 11 10 10.250 9 7-3/4 1-1/4 0.190 12 11 10.250 10 8-3/4 1-1/40.250 11 9-3/4 1-1/40.250 12 10-3/4 1-1/40.250 13 11-3/4 1-1/40.250 14 12-3/4 1-1/4TRUSS TRUSS ROUND MUSHROOM #3 PHILLIPS0.120 0.103 0.1100.500 0.438 0.437YES YES YESYES YES YESHEXAGONAL 2-7/8 GALVALUME ROUND 2 POLYCARBONATE HEXROUND 2 GALVALUME (INSULATION) 2-7/8 GALVALUMEROUND(IN-SEAM) 2 GALVALUMEROUND(IN-SEAM) 2-3/8 GALVALUMEN/A REQUIRED REQUIREDN/AOPTIONALHAMMER DRILL / HAMMERHAMEMR DRILL613 1285 810YES YES YESFM, METRO-DADE COUNTY FM, ICBO, BOCA, SBCCI FM, ICBO, UL, SBCCIYES YES YES437

Roof Fasteners: Concrete Decks1. COMPANY NAME FIRESTONE BUILDING PRODUCTS GAF MATERIALS CORP.2. PRODUCT NAME FIRESTONE CONRETE DRIVE GAFTITE CD-10/EVERUARD SPIKE3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE 1038-HARDENED STEEL HARDENED CARBON STEEL6. COATING TYPE FLUOROCARBON CR-10 FLUOROCARBON7. SHANK TYPE SHANK COMPRESSION8. POINT TYPE DIAMOND STARTER POINT9. METHOD OF ATTACHMENT SHANK EXPANSION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.250 1-1/2 1/4 1-1/4 0.215 2 1 10.250 2 3/4 1-1/4 0.215 2-1/2 1-1/2 10.250 2-1/2 1-1/4 1-1/4 0.215 3 2 10.250 3 1-3/4 1-1/4 0.215 3-1/2 2-1/2 10.250 3-1/2 2-1/4 1-1/4 0.215 4 3 10.250 4 2-3/4 1-1/4 0.215 4-1/2 3-1/2 10.250 4-1/2 3-1/4 1-1/4 0.215 5 4 10.250 5 3-3/4 1-1/4 0.215 5-1/2 4-1/2 10.250 5-1/2 4-1/4 1-1/4 0.215 6 5 10.250 6 4-3/4 1-1/4 0.215 6-1/2 5-1/2 10.250 6-1/2 5-1/4 1-1/4 0.215 7 6 10.250 7 5-3/4 1-1/4 0.215 7-1/2 6-1/2 10.250 7-1/2 6-1/4 1-1/4 0.215 8 7 10.250 8 6-3/4 1-1/4 0.215 8-1/2 7-1/2 10.215 9 8 10.215 9-1/2 8-1/2 10.215 10 9 10.215 10-1/2 9-1/2 10.215 11 10 10.215 11-1/2 10-1/2 10.215 12 11 111. HEAD SHAPE NAIL-TYPE ROUND12. HEAD DIMENSIONS (inches)Thickness 0.110 0.105Diameter 0.422 0.43513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALHEX ROUND 2 STEEL(INSULATION) 2-7/8 GALVALUME ROUND 2 PLASTICROUND ROUND 2 STAINLESS STEEL(IN-SEAM) 2 GALVALUME ROUND 3 STEELROUND ROUND 3 PLASTIC(IN-SEAM) 2-3/8 GALVALUME ROUND 3 STAINLESS STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)SDS SPIKE DRIVER (OPTIONAL)Other HAMMER DRILL (REQUIRED) HAMMER DRILL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 1000 116417. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, ICBO, UL, SBCCI FM, UL, ICBO, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable438

Roof Fasteners: Concrete DecksGAF MATERIALS CORP. GAF MATERIALS CORP. HILTI INC.FLUTED CONCRETE NAIL GAFTITE #140-10 (C. STEEL) HILTI FASTNERS #12U.S. U.S. U.S.X X XX X XX X XHARDEND CARBON STEEL HARDENED CARBON STEEL CARBON STEEL C-1022CR-1O FLUOROCARBO CR-10 FLUOROCARBON TRU-KOTE PC-3 (FLUOROCARBON PAINT)SPIRAL FLUTED THREADED THREADEDDIAMOND PINCH, SELF-DRILLING DOUBLE FLUTE SELF-DRILLINGFRICTION THREADED THREADED0.215 1-1/8 1/8 1 0.190 1-1/4 1/4 1 0.160 1-5/8 1-1/8 1/20.215 1-1/2 1/2 1 0.190 1-3/4 3/4 1 0.160 2-1/4 1-3/4 1/20.215 2 1 1 0.190 2 1 1 0.160 2-7/8 2-3/8 1/20.215 2-1/2 1-1/2 1 0.190 3 2 1 0.160 3-1/4 2-3/4 1/20.215 3 2 1 0.190 4 3 1 0.160 3-3/4 3-1/2 1/20.215 3-1/2 2-1/2 1 0.190 5 4 1 0.160 4-1/2 4 1/20.215 4 3 1 0.190 6 5 1 0.160 5 4-1/2 1/20.215 4-1/2 3-1/2 1 0.190 7 6 1 0.160 6 5-1/2 1/20.215 5 4 1 0.190 8 7 1 0.160 7 6-1/2 1/20.215 5-1/2 4-1/2 1 0.190 9 8 1 0.160 8 7-1/2 1/20.215 6 5 1 0.190 10 9 1 0.160 10 9-1/2 1/20.215 6-1/2 5-1/2 1 0.190 11 10 1 0.160 12 11-1/2 1/20.215 7 6 1 0.190 12 11 10.215 7-1/2 6-1/2 1 0.190 14 13 10.215 8 7 1 0.190 16 15 10.190 17 16 10.190 18 17 10.190 20 19 10.190 21 20 10.190 22 21 10.190 24 23 1ROUND ROUND TRUSS, #3 PHILLIPS TRUSS #3 PHILLIPS, 1/4 HEX WASHER0.125 0.110 0.1050.410 0.435 0.440YES YES YESYES YES YESROUND 2 STEEL ROUND 2 STEEL ROUND 2 G90 GALVANIZEDROUND 2 PLASTIC ROUND 2 PLASTIC ROUND 3 G90 GALVANIZEDROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEEL ROUND 3 CO-POLYMER PLASTICROUND 3 STEEL ROUND 3 STEEL ROUND 2 GALFANROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 3 GALFANROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELREQUIREDREQUIREDOPTIONALHAMMER DRILL HAMMER DRILL (REQUIRED) CARBIDE DRILL BIT (REQUIRED)600 800 1285YES YES YESFM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YES439

Roof Fasteners: Concrete Decks1. COMPANY NAME HILTI INC. HILTI INC.2. PRODUCT NAME HILTI FASTENERS #12 S.S. HILTI FASTENERS #143. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE STAINLESS STEEL (TRIMRITE ALLOY #S42010) CARBON STEEL C-10226. COATING TYPE TRU-KOTE PC-3 (FLUOROCARBON PAINT)7. SHANK TYPE THREADED THREADED8. POINT TYPE SELF-DRILLING DOUBLE FLUE SELF-DRILLING9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.160 1-5/8 1-1/8 1 0.180 1-1/2 1 1/20.160 2-1/4 1-3/4 1 0.180 2 1-1/2 1/20.160 2-7/8 2-3/8 1 0.180 3 2-1/2 1/20.160 3-3/4 3-1/2 1 0.180 4 3-1/2 1/20.160 4-1/2 4 1 0.180 5 4-1/2 1/20.160 5 4-1/2 1 0.180 6 5-1/2 1/20.160 6 5-1/2 1 0.180 7 6-1/2 1/20.160 7 6-1/2 1 0.180 8 7-1/2 1/20.160 8 7-1/2 1 0.180 10 9-1/2 1/20.160 10 9-1/2 1 0.180 12 11-1/2 1/20.160 12 11-1/2 111. HEAD SHAPE #10 TRUSS, PHILLIPS #3 TRUSS #3 PHILILPS12. HEAD DIMENSIONS (inches)Thickness 0.105 0.105Diameter 0.440 0.44013. PLATESRequired (yes/no) YESAvailable From Manufacturer (yes/no)YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 G90 GALVANIZED ROUND 2 G90 GALVANIZEDROUND 3 G90 GALVANIZED ROUND 3 G90 GALVANIZEDROUND 3 CO-POLYMER PLASTIC ROUND 3 CO-POLYMER PLASTICROUND 2 GALFAN ROUND 2 GALFANROUND 3 GALFAN ROUND 3 GALFAN15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other CARBIDE DRILL BIT (REQUIRED) CARBIDE DRILL BIT (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 1285 79917. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, BOCA, ICBO, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES20. SEE APPENDIX IF CHECKEDNA = not applicable440

Roof Fasteners: Concrete DecksHILTI INC. HILTI INC. ITW BUILDEXHILTI FASTENERS #10 X-IR FASTENER #14 ROOFGRIPU.S. LIECHTENSTEIN U.S.X X XX X XX X XPOLYETHYLENE/AISI 1061HARDENED CARBON STEELTRU-KOTE PC-3 (FLUOROCARBON PAINT) DACROMET 30 CLIMASEALTHREADED SMOOTH MODIFIED STANDARD THREADGIMLET BALLISTIC X-POINTTHREADED POWDER-ACTUATED THREADED0.150 1-5/8 1-1/8 1/2 0.177 1-1/16 0 - 1/8 1 0.245 1-1/2 1/2 10.150 2-1/4 1-3/4 1/2 0.177 1-7/16 1-1/2 1 0.245 2 1 10.150 2-7/8 2-3/8 1/2 0.177 1-5/8 2 - 2-1/2 1 0.245 3 2 10.150 3-3/4 3-1/2 1/2 0.177 2-5/8 2-1/2 - 3-1/2 1 0.245 4 3 10.150 4-1/2 4 1/2 0.177 3 3-1/2 - 4-3/4 1 0.245 5 4 10.150 5 4-1/2 1/2 0.245 6 5 10.150 6 5-1/2 1/2 0.245 7 6 10.245 8 7 1#10 TRUSS, PHILLIPS #3 DOME #3 PHILLIPS PAN HEAD0.110 0.062 0.1180.390 0.312 0.448INTEGRAL WITH FASTENERYESYESROUND 2 G90 GALVANIZED ROUND 2 POLYAMIDE SQUARE 3 X 3 GALVALUMEROUND 3 G90 GALVANIZED ROUND 3 POLYAMIDE GEARLOCK 3 POLYOLEFINROUND 3 CO-POLYMER PLASTIC OVAL 1-1/2 X 3 POLYAMIDE ROUND 2 GALVALUMEROUND 2 GALFAN OVAL 1-1/2 X 3 CARBON STEELROUND 3 GALFANREQUIREDREQUIREDCARBIDE DRILL BIT (REQUIRED) POWDER ACTUATED TOOL DRILL BIT WITH ROTARY HAMMER799 270 1110YES YES YESFM, BOCA, ICBO, METRO-DADE COUNTY FM FM, METRO-DADE COUNTYYES441

Roof Fasteners: Concrete Decks1. COMPANY NAME ITW BUILDEX ITW BUILDEX2. PRODUCT NAME KING-CON #15 ROOFGRIP3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE CLIMASEAL CLIMASEAL7. SHANK TYPE PARTIALLY SPIRAL FLUTED THREADED8. POINT TYPE NAIL SELF-DRILLING9. METHOD OF ATTACHMENT FRICTION THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.250 1-1/8 1/8 1-1/4 0.260 1-1/4 1/4 10.250 1-1/2 1/4 1-1/4 0.260 2 1 10.250 2 3/4 1-1/4 0.260 3 2 10.250 2-1/2 1-1/4 1-1/4 0.260 4 3 10.250 3 1-3/4 1-1/4 0.260 5 4 10.250 3-1/2 2-1/4 1-1/4 0.260 6 5 10.250 4 2-3/4 1-1/4 0.260 7 6 10.250 4-1/2 3-1/4 1-1/4 0.260 8 7 10.250 5 3-3/4 1-1/4 0.260 10 9 10.250 5-1/2 4-1/4 1-1/4 0.260 12 11 10.250 6 4-3/4 1-1/4 0.260 14 13 10.250 7 5-3/4 1-1/4 0.260 16 15 10.250 8 6-3/4 1-1/40.250 9 7-3/4 1-1/40.250 10 8-3/4 1-1/411. HEAD SHAPE ROUND FLAT HEAD #3 PHILLIPS PAN HEAD12. HEAD DIMENSIONS (inches)Thickness 0.100 0.118Diameter 0.440 0.44813. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME ROUND 2 GALVALUMESQUARE 3 GALVALUME SQUARE 3 GALVALUMEGEARLOCK 3 POLYOLEFIN15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other HAMMER DRILL HAMMER DRILL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 1031 115717. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable442

Roof Fasteners: Concrete DecksJOHNS MANVILLE INTERNATIONAL INC. NATIONAL NAIL CORPORATION OLYMPIC MANUFACTURING GROUPCD-10 ARDOX H.T. GALVANIZE CONCRETE FLUTED CONCRETE NAILU.S. CANADA U.S.X X XXXXXHARDENED CARBON STEEL HARDENED STEEL HARDENED CARBON STEELCR-10 HOT-DIPPED GALVANIZED CR-10 FLUOROCARBONSPLIT SHANK SPIRAL FLUTED SPIRAL FLUTED45 DEGREE DIAMOND STARTER DIAMOND DIAMONDSHANK EXPANSION FRICTION FRICTION0.215 2 1 1 0.212 1-1/8 1/2 1 0.215 1-1/8 1/8 10.215 2-1/2 1-1/2 1 0.212 1-1/2 3/4 1 0.215 1-1/2 1/2 10.215 3 2 1 0212 2 1-1/4 1 0.215 2 1 10.215 3-1/2 2-1/2 1 0.212 2-1/2 1-3/4 1 0.215 2-1/2 1-1/2 10.215 4 3 1 0212 3 2-1/4 1 0.215 3 2 10.215 4-1/2 3-1/2 1 0.212 3-1/2 2-3/4 1 0.215 3-1/2 2-1/2 10.215 5 4 1 0212 4 3-1/4 1 0.215 4 3 10.215 5-1/2 4-1/2 1 0.212 4-1/2 3-3/4 1 0.215 4-1/2 3-1/2 10.215 6 5 1 0212 5 4-1/4 1 0.215 5 4 10.215 7 6 1 0.212 5-1/2 4-3/4 1 0.215 5-1/2 4-1/2 10.215 8 7 1 0212 6 5-1/4 1 0.215 6 5 10.215 9 8 1 0.212 6-1/2 5-3/4 1 0.215 6-1/2 5-1/2 10212 7 6-1/4 1 0.215 7 6 10212 8 6-3/4 1 0.215 7-1/2 6-1/2 10212 9 7-1/4 1 0.215 8 7 10212 10 7-3/4 10212 12 8-1/4 1ROUND COMMON TYPE ROUND0.125 0.09375 0.1250.435 0.4375 0.425YES YES YESYES YES YESROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 2 STEELROUND 2 PLASTICROUND 2 STAINLESS STEELROUND 3 STEELROUND 3 PLASTICROUND 3 STAINLESS STEELROUND 3-1/2 STEELREQUIREDHAMMER DRILL ROTARY DRILL AND HAMMER HAMMER DRILL1164 600 600YES NO YESFM, UL, ICBO, METRO-DADE COUNTY -- FM, UL, ICBO, METRO-DADE COUNTYYES NO YESXX443

Roof Fasteners: Concrete Decks1. COMPANY NAME OLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUP2. PRODUCT NAME OLYMPIC FASTENER HD #14 (C. STEEL) OLYMPIC CD-103. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE HARDENED CARBON STEEL HARDENED CARBON STEEL6. COATING TYPE CR-10 FLUOROCARBON CR-10 FLUOROCARBON7. SHANK TYPE THREADED SPLIT BULB8. POINT TYPE PINCH, SELF-DRILLING OR TAPEX DIAMOND STARTER POINT9. METHOD OF ATTACHMENT THREADED COMPRESSION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.190 1-1/4 1/4 1 0.215 2 1 10.190 1-3/4 3/4 1 0.215 2-1/2 1-1/2 10.190 2 1 1 0.215 3 2 10.190 3 2 1 0.215 3-1/2 2-1/2 10.190 4 3 1 0.215 4 3 10.190 5 4 1 0.215 4-1/2 3-1/2 10.190 6 5 1 0.215 5 4 10.190 7 6 1 0.215 5-1/2 4-1/2 10.190 8 7 1 0.215 6 5 10.190 9 8 1 0.215 7 6 10.190 10 9 1 0.215 8 7 10.190 11 10 1 0.215 9 8 10.190 12 11 1 0.215 10 9 10.190 14 13 1 0.215 12 11 10.190 16 15 1 0.215 14 13 10.190 17 16 10.190 18 17 10.190 20 19 10.190 21 20 10.190 22 21 10.190 24 23 111. HEAD SHAPE ROUND TRUSS, #3 PHILLIPS ROUND12. HEAD DIMENSIONS (inches)Thickness 0.110 0.100Diameter 0.435 0.42513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STEEL ROUND 2 STEELROUND 2 PLASTIC ROUND 2 PLASTICROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEELROUND 3 STEEL ROUND 3 STEELROUND 3 PLASTIC ROUND 3 PLASTICROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3-1/2 STEEL15. INSTALLATION EQUIPMENTScrew Gun (optional/required)REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)OPTIONALOther HAMMER DRILL (REQUIRED) HAMMER DRILL16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 800 80017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, UL, ICBO, METRO-DADE COUNTY FM, UL, ICBO, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) X YES20. SEE APPENDIX IF CHECKEDNA = not applicable444

Roof Fasteners: Concrete DecksPOWERS FASTENERS POWERS FASTENERS POWERS FASTENERSPOWERS RAWL 3/16" SPIKE POWERS RAWL 1/4" SPIKE POWERS RAWL #14 DECK SCREWU.S. U.S. U.S.X X XX X XX X XHEAT TREADED CARBON STEEL HEAT TREADED CARBON STEEL CASE HARDENED CARBON STEELPERMA-SEAL FLUOROPOLYMER PERMA-SEAL FLUOROPOLYMER PERMA-SEAL FLUOROPOLYMERNA NA SPIRAL THREADNA NA DRILL TYPEPRE-EXPANDED SHANK COMPRESSION PRE-EXPANDED SHANK COMPRESSION THREADED0.190 1 1/8 7/8 0.240 1 1/8 7/8 0.238 1-5/8 1/8 1-1/20.190 1-1/4 3/8 7/8 0.240 1-1/4 3/8 7/8 0.238 2-1/4 3/4 1-1/20.190 1-1/2 1/4 1-1/4 0.240 1-1/2 1/4 1-1/4 0.238 2-7/8 1-3/8 1-1/20.190 2 3/4 1-1/4 0.240 2 3/4 1-1/4 0.238 3-3/4 2-1/4 1-1/20.190 2-1/2 1-1/4 1-1/4 0.240 2-1/2 1-1/4 1-1/4 0.238 4-1/2 3 1-1/20.190 3 1-3/4 1-1/4 0.240 3 1-3/4 1-1/4 0.238 5 3-1/2 1-1/20.190 3-1/2 2-1/4 1-1/4 0.240 3-1/2 2-1/4 1-1/4 0.238 6 4-1/2 1-1/20.190 4 2-3/4 1-1/4 0.240 4 2-3/4 1-1/4 0.238 7 5-1/2 1-1/20.190 4-1/2 3-1/4 1-1/4 0.240 4-1/2 3-1/4 1-1/4 0.238 8 6-1/2 1-1/20.190 5 3-3/4 1-1/4 0.240 5 3-3/4 1-1/4 0.238 10 8-1/2 1-1/20.190 5-1/2 4-1/4 1-1/4 0.240 5-1/2 4-1/4 1-1/4 0.238 12 10-1/2 1-1/20.190 6 4-3/4 1-1/4 0.240 6 4-3/4 1-1/40.190 7 5-3/4 1-1/4 0.240 6-1/2 4-3/4 1-1/40.190 8 6-3/4 1-1/4 0.240 7 5-3/4 1-1/40.190 9 7-3/4 1-1/4 0.240 7-1/2 6-1/4 1-1/40.190 10 8-3/4 1-1/4 0.240 8 6-3/4 1-1/40.240 9 7-3/4 1-1/40.240 10 8-3/4 1-1/40.240 11 9-3/4 1-1/40.240 12 10-3/4 1-1/40.240 12 10-3/4 1-1/40.240 13 11-3/4 1-1/40.240 14 12-3/4 1-1/4MUSHROOM MUSHROOM PHILLIPS FLAT TRUSS HEAD #3 RECESS0.110 0.110 0.1180.445 0.422 0.448YES YES YESYES YES YESROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 STAINLESS STEEL ROUND BARBED 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3 PLASTIC ROUND 3 PLASTIC ROUND 3 PLASTICREQUIREDSTAND-UP TOOL (OPTIONAL)HAMMER DRILL (REQUIRED) HAMMER DRILL (REQUIRED) HAMMER DRILL (REQUIRED)975 1100 960YES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FMYES YES YES445

Roof Fasteners: Concrete Decks1. COMPANY NAME POWERS FASTENERS SFS STADLER INC.2. PRODUCT NAME POWERS RAWL #15 DECK SCREW INSUL-FIXX $14-103. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up MembranesXSingle-Ply Membranes X X5. MATERIAL TYPE CASE HARDENED CARBON STEEL HARDENED STEEL6. COATING TYPE PERMA-SEAL FLUOROPOLYMER TUFF-TITE II7. SHANK TYPE SPIRAL THREAD SPIRAL THREAD8. POINT TYPE RICOH "S" POINT DRILL POINT9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.264 1-1/4 -- 1-1/2 0.190 1-1/4 1/4 10.264 2 1/2 1-1/2 0.190 2 1 10.264 3 1-1/2 1-1/2 0.190 3 2 10.264 4 2-1/2 1-1/2 0.190 4 3 10.264 5 3-1/2 1-1/2 0.190 5 4 10.264 6 4-1/2 1-1/2 0.190 6 5 10.264 7 5-1/2 1-1/2 0.190 7 6 10.264 8 6-1/2 1-1/2 0.190 8 7 10.264 9 7-1/2 1-1/2 0.190 9 8 10.264 10 9-1/2 1-1/2 0.190 10 9 10.264 12 10-1/2 1-1/2 0.190 12 11 10.264 14 12-1/2 1-1/2 0.190 14 13 10.264 16 14-1/2 1-1/2 0.190 16 15 111. HEAD SHAPE PHILLIPS TRUSS HEAD #3 RECESS ROUND WITH #3 PHILLIPS TRUSS12. HEAD DIMENSIONS (inches)Thickness 0.130 0.103Diameter 0.448 0.42513. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND BARBED 2 GALVALUME ROUND 3 GALVALUMEROUND 3 GALVALUME ROUND 2 GALVALUMEROUND 3 STAINLESS STEELROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)STAND-UP TOOL (OPTIONAL)Special Tool Needed (optional/required)OtherHAMMER DRILL (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 1015 64817. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable446

Roof Fasteners: Concrete DecksSFS STADLER INC. SFS STADLER INC. SFS STADLER INC.STADLER SPIKE STADLER SPIKE EXTRA LOAD FASTENER HDU.SU.S.X X XX X XX X XHARDENED STEEL HARDENED STEEL HARDENED STEELPERMASEAL PERMASEAL TUFF-TITE II-- -- THREADEDNA NA DRILL POINTCOMPRESSION COMPRESSION THREADED0.187 1-1/2 1/4 1-1/4 0.240 1-1/2 1/4 1-1/4 0.205 1-1/4 3/4 10.187 2 3/4 1-1/4 0.240 2 3/4 1-1/4 0.205 2 1 10.187 2-1/2 1-1/4 1-1/4 0.240 2-1/2 1-1/4 1-1/4 0.205 3 2 10.187 3 1-3/4 1-1/4 0.240 3 1-3/4 1-1/4 0.205 4 3 10.187 3-1/2 2-1/4 1-1/4 0.240 3-1/2 2-1/4 1-1/4 0.205 5 4 10.187 4 2-3/4 1-1/4 0.240 4 2-3/4 1-1/4 0.205 6 5 10.187 4-1/2 3-1/4 1-1/4 0.240 4-1/2 3-1/4 1-1/4 0.205 7 6 10.187 5 3-3/4 1-1/4 0.240 5 3-3/4 1-1/4 0.205 8 7 10.187 5-1/2 4-1/4 1-1/4 0.240 5-1/2 4-1/4 1-1/4 0.205 9 8 10.187 6 4-3/4 1-1/4 0.240 6 4-3/4 1-1/4 0.205 10 9 10.187 6-1/2 5-1/4 1-1/4 0.240 6-1/2 5-1/4 1-1/4 0.205 12 10 10.187 7 5-3/4 1-1/4 0.240 7 5-3/4 1-1/4 0.205 12 11 10.187 7-1/2 6-1/4 1-1/4 0.240 8 6-3/4 1-1/4 0.205 14 13 10.187 8 6-3/4 1-1/4 0.240 9 7-3/4 1-1/4 0.205 16 15 10.187 9 7-3/4 1-1/4 0.240 10 8-3/4 1-1/40.187 10 8-3/4 1-1/4 0.240 10 8-3/4 1-1/40.240 12 10-3/4 1-1/40.240 14 12-3/4 1-1/40.240 14 12-3/4 1-1/4ROUND ROUND ROUND WITH #3 PHILLIPS0.110 0.110 0.1030.422 0.422 0.425YES YES YESYES YES YESROUND 3 GALVALUME ROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUME ROUND 2 GALVALUMESDS SPIKE DRIVER (OPTIONAL) SDS SPIKE DRIVER (OPTIONAL) REQUIREDHAMMER (REQUIRED) HAMMER (REQUIRED) HAMMER DRILL OR IMPACT1100 1100 1345YES YES YESFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYYES YES YESX447

Roof Fasteners: Concrete Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME ZNACHOR DRIVE NAIL EGS-PIN ZNACHOR DRIVE NAIL SS-PIN3. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation AttachmentBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE ZINC (ZAMAK 7) ZINC (ZAMAK 7)6. COATING TYPE ZINC ZINC7. SHANK TYPE ELECTRO GALVANIZED CARBON STEEL STAINLESS STEEL8. POINT TYPE BLUNT BLUNT9. METHOD OF ATTACHMENT SLEEVE EXPANSION SLEEVE EXPANSION10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)1/4 3/4 1/4 1/2 1/4 3/4 1/4 1/23/16 7/8 3/8 1/2 3/16 7/8 3/8 1/21/4 1 1/8 7/8 1/4 1 1/8 7/81/4 1-1/4 3/8 7/8 1/4 1-1/4 3/8 7/81/4 1-1/2 5/8 7/8 1/4 1-1/2 5/8 7/81/4 2 1-1/8 7/8 1/4 2 1-1/8 7/811. HEAD SHAPE MUSHROOM MUSHROOM12. HEAD DIMENSIONS (inches)Thickness 0.125 0.125Diameter 0.550 0.55013. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME15. INSTALLATION EQUIPMENTScrew Gun (optional/required) NA NAInstallation Tool With Screw Gun (optional/required) NA NASpecial Tool Needed (optional/required) TERMINATION BARS CAN BE USED (OPTIONAL) TERMINATION BARS CAN BE USED (OPTIONAL)Other 1/4" DRILL BIT AND DRILL (REQUIRED) 1/4" DRILL BIT AND DRILL (REQUIRED)16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 648, NA, 937, 1151, 1184, 1272 648, NA, 937, 1151, 1184, 127217. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES DADE COUNTY DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable448

Roof Fasteners: Concrete DecksSIMPLEX TRI-PLY TRU-FAST CORPORARTIONMASONRY ROUND METAL CAP TRI-FAST DP EHD (EXTRA HEAVY DUTY) #15U.S. U.S. U.S.X X XX X XX XHARDENED CARBON STEEL CARBON STEEL CARBON STEEL C-1022NA TRU-KOTE TRU-KOTE PC-3 (FLUOROPOLYMER PAINT)FLUTED THREADED THREADEDDIAMONDFLUTED FRICTION THREADED THREADED0.148 3/4 -- 3/4 0.180 1-1/4 1/4 1 0.204 1-1/4 3/4 1/20.148 7/8 -- 7/8 0.180 1-3/4 3/4 1 0.204 2 1-1/2 1/20.148 1 -- 3/4 0.180 2-1/4 1-1/4 1 0.204 3 2-1/2 1/20.148 1-1/4 1/4 1 0.180 2-3/4 1-3/4 1 0.204 4 3-1/2 1/20.148 1-1/2 1/2 1 0.180 3-1/4 2-1/4 1 0.204 5 4-1/2 1/20.148 2 1 1 0.180 3-3/4 2-3/4 1 0.204 6 5-1/2 1/20.148 2-1/2 1-1/2 1 0.180 4-1/4 3-1/4 1 0.204 7 6-1/2 1/20.148 3 2 1 0.180 5 4 1 0.204 8 7-1/2 1/20.148 3-1/2 2-1/2 1 0.180 6 5 1 0.204 9 8-1/2 1/20.148 4 3 1 0.180 7 6 1 0.204 10 9-1/2 1/20.180 8 7 1 0.204 11 10-1/2 1/20.204 12 11-1/2 1/20.204 14 13-1/2 1/20.204 16 15-1/2 1/20.204 18 17-1/2 1/20.204 20 19-1/2 1/2ROUND MODIFIED PHILLIPS #3 TRUSS #3 PHILLIPS0.037 0.118 0.1051.000 0.445 0.440NO -- YESYES -- YESPARABOLIC 2 GALVALUME ROUND 2 GALVALUME ROUND 2 GALVALUMEPARABOLIC 3 GALVALUME ROUND 3 GALVALUME ROUND 2.4 GALVALUMEROUND 3 PLASTIC ROUND 3 GALVALUMEROUND 3 PLASTICNAREQUIREDNA REQUIRED OPTIONALNAOPTIONALMAGNETIC POLE HAMMER OR REGULAR ROOFING HAMMERNA 925 --NO YES YESNONE -- --YES YES YESX449

Roof Fasteners: Concrete Decks1. COMPANY NAME TRU-FAST CORPORATION TRU-FAST CORPORATION2. PRODUCT NAME CF TAP GRIP HD (HEAVY DUTY) #143. COUNTRY OF MANUFACTURE U.S. U.S.4. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X5. MATERIAL TYPE CARBON STEEL C-1022 CARBON STEEL C-10226. COATING TYPE TRU-KOTE PC-3 (FLUOROPOLYMER PAINT) TRU-KOTE PC-3 (FLUOROPOLYMER PAINT)7. SHANK TYPE THREADED THREADED8. POINT TYPE --9. METHOD OF ATTACHMENT THREADED THREADED10. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.180 1-1/4 1/4 1 0.180 1-1/2 1/2 10.180 1-3/4 3/4 1 0.180 2 1 10.180 2-1/4 1-1/4 1 0.180 3 2 10.180 2-3/4 1-3/4 1 0.180 4 3 10.180 3-1/4 2-1/4 1 0.180 5 4 10.180 3-3/4 2-3/4 1 0.180 6 5 10.180 4-1/4 3-1/4 1 0.180 7 6 10.180 5 4 1 0.180 8 7 10.180 5-1/2 4-1/2 1 0.180 9 8 10.180 6 5 1 0.180 10 9 10.180 6-1/2 5-1/2 1 0.180 11 10 10.180 7 6 1 0.180 12 11 10.180 7-1/2 6-1/2 10.180 8 7 10.180 9 8 10.180 10 9 10.180 11 10 10.180 12 11 111. HEAD SHAPE MODIFIED PHILLIPS #3 TRUSS #3 PHILLIPS12. HEAD DIMENSIONS (inches)Thickness 0.118 0.105Diameter 0.445 0.44013. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES14. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 GALVALUME ROUND 2 GALVALUMEROUND 2.4 GALVALUME ROUND 2.4 GALVALUMEROUND 3 GALVALUME ROUND 3 GALVALUMEROUND 3 PLASTIC ROUND 3 PLASTIC15. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required) REQUIRED REQUIREDSpecial Tool Needed (optional/required) OPTIONAL OPTIONALOther16. AVERAGE PULLOUT RESISTANCE (lbs.)(FM TINIUS OLSEN PULLOUT RESISTANCE TESTS)3,000 PSI AGED 28 DAYS) 925 74017. MEETS THE FM APPROVAL REQUIREMENTS AS ACOMPONENT OF A CLASS I CONCRETE ROOFCONSTRUCTION (yes/no) YES YES18. ACCEPTED BY THE FOLLOWING CODES FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable450

Roof Fasteners: Concrete DecksU.S. INTECDRILL-TEC TAP GRIPU.S.XXCARBON STEELFLUOROPOLYMER PAINTTHREADED--MECHANICAL0.180 1-1/4 1/4 10.180 1-3/4 3/4 10.180 2-1/4 1-1/4 10.180 2-3/4 1-3/4 10.180 3-1/4 2-1/4 10.180 3-3/4 2-3/4 10.180 4-1/4 3-1/4 10.180 5 4 10.180 6 5 10.180 8 7 1RECESSED SQUARE----YESYESROUND 2.7 GALVALUMEROUND 3 PLASTICREQUIREDOPTIONAL925YESFM, METRO-DADE COUNTYYES451

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME CARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED2. PRODUCT NAME HP SPEED-LOCK TOGGLE BOLT HP TOGGLE BOLT3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up MembranesSingle-Ply Membranes X X6. MATERIAL TYPE CARBON STEEL CARBON STEEL7. COATING TYPE ZINC-BASED PRIMER, FLUOROPOLYMER COATING ZINC RICH COATING, LOCKING ADHESIVE8. SHANK TYPE THREADED THREADED9. POINT TYPE NA NA10. METHOD OF ATTACHMENT TOGGLE BOLT PLUS WING THROUGH PRE-DRILLED HOLE TOGGLE BOLT PLUS WING THROUGH PRE-DRILLED HOLE11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.215 4 2-1/2 1-1/2 0.215 4 2-1/2 1-1/20.215 6 4-1/2 1-1/2 0.215 6 4-1/2 1-1/20.215 7 5-1/2 1-1/2 0.215 7 5-1/2 1-1/20.215 8 6-1/2 1-1/2 0.215 8 6-1/2 1-1/20.215 9 7-1/2 1-1/2 0.215 10 9-1/2 1-1/20.215 10 9-1/2 1-1/2 0.215 12 10-1/2 1-1/20.215 12 10-1/2 1-1/2 0.215 14 12-1/2 1-1/20.215 14 12-1/2 1-1/2 0.215 16 14-1/2 1-1/20.215 16 14-1/2 1-1/212. HEAD SHAPE ROUND TRUSS WITH #3 PHILLIPS ROUND TRUSS WITH #3 PIHLLIPS13. HEAD DIMENSIONS (inches)Thickness 0.110 0.110Diameter 0.435 0.43514. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALSQUARE W/ROUNDEDSQUARE W/ROUNDEDCORNERS 2-7/8 GALVALUME CORNERS 2-7/8 GALVALUMEROUND 2 GALVALUME ROUND 2 GALVALUME16. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete --- --Gypsum -- --Cementitious Wood Fiber -- --18. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteGypsumCementitious Wood Fiber19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable452

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksCARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC INCORPORATED CARLISLE SYNTEC NCORPORATEDHP LIGHTWEIGHT FASTENER HP NTB WITH & WITHOUT WIRES HP LITE-DECKU.S. U.S. U.S.X XX X XX X XX X XX X XNYLON NYLON HARDENED CARBON STEELNA NA EPOXY ELECTRODEPOSITIONSPIRAL THREAD SPIRAL THREAD THREADEDGIMLET GIMLET PINCHTHREADED, SUBSTRATE COMPACTION THREADED WITH & WITHOUT WIRES THREADED0.430 2 1/2 1-1/2 0.4375 2-1/2 1 1-1/2 0.310 3 1 20.430 2-1/2 1 1-1/2 0.4375 3 1-1/2 1-1/2 0.310 4 2 20.430 3 1-1/2 1-1/2 0.4375 3-1/2 2 1-1/2 0.310 5 3 20.430 3-1/2 2 1-1/2 0.4375 4 2-1/2 1-1/2 0.310 6 4 20.430 4 2-1/2 1-1/2 0.4375 4-1/2 3 1-1/2 0.310 7 5 20.430 4-1/2 3 1-1/2 0.4375 5 3-1/2 1-1/2 0.310 8 6 20.430 5 3-1/2 1-1/2 0.4375 5-1/2 4 1-1/2 0.310 9 7 20.430 5-1/2 4 1-1/2 0.4375 6 4-1/2 1-1/2 0.310 10 8 20.430 6 4-1/2 1-1/2 0.4375 6-1/2 5 1-1/2 0.310 12 10 20.430 6-1/2 5 1-1/2 0.4375 7 5-1/2 1-1/20.430 7 5-1/2 1-1/2 0.4375 7-1/2 6 1-1/20.430 7-1/2 6 1-1/2 0.4375 8 6-1/2 1-1/20.430 8 6-1/2 1-1/2 0.4375 8-1/2 7 1-1/20.430 8-1/2 7 1-1/2 0.4375 9 7-1/2 1-1/20.430 9 7-1/2 1-1/2 0.4375 9-1/2 8 1-1/20.430 9-1/2 8 1-1/2 0.4375 10 8-1/2 1-1/20.430 10 8-1/2 1-1/2ROUND, 1/4-IN. RECESS ROUND, DOUBLE HEX ROUND #3 PHILLIPS0.120 0.100 --1.00 1.00 0.558YES YES YESYES YES YESROUND BARBED 2 GALVALUME ROUND BARBED 2 CARBON STEEL ROUND 3 CARBON STEELROUND BARBED 3 GALVALUME ROUND BARBED 3 CARBON STEELOPTIONALREQUIREDIMPACT WRENCH, ELECTRIC DRILL (OPTIONAL)ELIMINATOR TOOL (OPTIONAL)IMPACT WRENCH/ELIMINATOR (OPTIONAL)-- -- ---- -- ---- -- --FMFM FM FMFM FM FMYES YES YES453

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME CELOTEX CORP. CONSTRUCTION FASTENERS INC.2. PRODUCT NAME ANCHORBOND AUGUR FASTENER DEKLITE3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE NYLON NYLON7. COATING TYPE NA NA8. SHANK TYPE SPIRAL THREAD SPIRAL THREAD9. POINT TYPE GIMLET GIMLET10. METHOD OF ATTACHMENT THREADED, SUBSTRATE COMPACTION THREADED, SUBSTRATE COMPACTION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.430 2 1/2 1-1/2 0.684 2 1/2 1-1/20.430 2-1/2 1 1-1/2 0.687 2-1/2 1 1-1/20.430 3 1-1/2 1-1/2 0.687 3 1-1/2 1-1/20.430 3-1/2 2 1-1/2 0.687 3-1/2 2 1-1/20.430 4 2-1/2 1-1/2 0.687 4 2-1/2 1-1/20.430 4-1/2 3 1-1/2 0.687 4-1/2 3 1-1/20.430 5 3-1/2 1-1/2 0.687 5 3-1/2 1-1/20.430 5-1/2 4 1-1/2 0.687 5-1/2 4 1-1/20.430 6 4-1/2 1-1/2 0.687 6 4-1/2 1-1/20.430 6-1/2 5 1-1/2 0.687 6-1/2 5 1-1/20.430 7 5-1/2 1-1/2 0.687 7 5-1/2 1-1/20.430 7-1/2 6 1-1/2 0.6870 7-1/2 6 1-1/20.430 8 6-1/2 1-1/2 0.687 8 6-1/2 1-1/20.430 8-1/2 7 1-1/2 0.687 8-1/2 7 1-1/20.430 9 7-1/2 1-1/2 0.687 9 7-1/2 1-1/20.430 9-1/2 8 1-1/2 0.687 9-1/2 8 1-1/20.430 10 8-1/2 1-1/2 0.687 10 8-1/2 1-1/212. HEAD SHAPE ROUND, 1/4-IN. RECESS ROUND, 1/4-IN RECESS13. HEAD DIMENSIONS (inches)Thickness 0.120 0.120Diameter 1.00 1.0014. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND BARBED 2 GALVALUME ROUND BARBED 2 GALVALUMEHEX BARBED 2-7/8 GALVALUME ROUND BARBED 3 GALVALUME16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other IMPACT WRENCH, ELECTRIC DRILL (OPTIONAL) IMPACT WRENCH, ELECTRIC DRILL (OPTIONAL)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 450 365Gypsum 450 540Cementitious Wood Fiber 450 44018. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteFM, METRO-DADE COUNTYGypsumFM, METRO-DADE COUNTYCementitious Wood FiberFM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable454

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksES PRODUCTS INC. ES PRODUCTS INC. ES PRODUCTS INC.HARDENED DO-ALL LOC-NAIL INSULDECK LOC-NAIL TWIN LOCK-NAILU.S. U.S. U.S.XXXXXX X XHARDENED COLD-ROLLED STEEL COLD-ROLLED STEEL COLD-R0LLED STEELZINC PLATE GALVALUME (AZ-55) GALVALUME (AZ-55)SPLIT, SERRATED DOUBLE THICKNESS HALF-ROUND TUBETWO SHARP PONTS FINE, SHARP WEDGESPREAD OF SERRATED SHANKS AUTOMATIC KNEE-BEND GRIPPING DIVERGING WIRE LEGS0.240 1-3/8 1/4 1-1/8 0.230 1-7/8 1/4 1-1/8 NA 1.8 NA 1SQUARE WITH ROUNDED CORNERS ROUND, CUPPED ROUND0.050 0.045 --0.375 0.500 2.7YESYESYESYESROUND 1-3/8 PRE-TINNED STEEL ROUND 2.7 GALVALUME ROUND 2.7 GALVALUMEINSULDECK DRIVERHAMMER HAMMER TWIN LOC DRIVER-- 60/100 --60 -- 300-- 79 200ULFM, METRO-DADE COUNTYYES YES YESX455

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME ES PRODUCTS INC. ES PRODUCTS INC.2. PRODUCT NAME FM-75 BASE PLY FASTENER NAIL-TITE TYPE A3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight ConcreteXGypsum XCementitious Wood Fiber5. USED WITH:Insulation AttachmentBuilt-Up Membranes X XSingle-Ply Membranes6. MATERIAL TYPE STEEL CARBON STEEL7. COATING TYPE HOT-DIPPED G-90 GALVANIZED & URETHANE ZINC PLATED8. SHANK TYPE TWO-PIECE RECTANGULAR TAPERED CONE9. POINT TYPE NA ROUND10. METHOD OF ATTACHMENT SHANK EXPANSION CONICAL EXTENDING LEGS11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)NA 1-1/5 NA NA NA 1-1/2 1/16 1-7/1612. HEAD SHAPE ROUND ROUND13. HEAD DIMENSIONS (inches)Thickness -- 0.105Diameter 2.70 1.714. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no)NA15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALNA NA NA NA NA NA16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other MAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 90 MIN NAGypsum NA 159Cementitious Wood Fiber NA NA18. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteFM, METRO-DADE COUNTYGypsum NA UL, FM, METRO-DADE COUNTYCementitious Wood Fiber NA YES19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES20. SEE APPENDIX IF CHECKEDNA = not applicable456

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksES PRODUCTS INC. ES PRODUCTS INC. ES PRODUCTS INC.NAIL-TITE TYPE R ES-90 BASE PLY FASTENER ES-60 BASE PLY FASTENERU.S. U.S. U.S.XXXX X XXXCARBON STEEL STEEL STEELZINC PLATED HOT DIPPED G-90 GALVANIZED HOT DIPPED G-90 GALVANIZEDTAPERED COE TWO-PIECE RECTANGULAR TWO-PIECE RECTANGULARROUND NA NACONICAL EXTENDING LEGS SHANK EXPANSION SHANK EXPANSIONNA 1 1/16 15/16 NA 1-7/10 NA NA NA 1-7/10 NA NAROUND ROUND ROUND0.015 -- --1.7 2.75 1.20NO NO NONA NO NONA NA NA NA NA NA ROUND 2-3/4 GAVALUMEMAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED)NA 90 MIN. 90 MIN.159 NA NANA NA NA-- --UL, FM, METRO-DADE COUNTY NA NAYES NA NAYESYES457

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME ES PRODUCTS INC. ES PRODUCTS INC.2. PRODUCT NAME ES-45 BASE PLY FASTENER FM-90 BASE PLY FASTENER3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsumCementitious Wood Fiber5. USED WITH:Insulation AttachmentBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE STEEL STEEL7. COATING TYPE HOT DIPPED G-90 GALVANIZED HOT DIPPED G-90 GALVANIZED & URETHANE COATING8. SHANK TYPE TWO-PIECE RECTANGULAR TWO-PIECE RECTANGULAR9. POINT TYPE NA NA10. METHOD OF ATTACHMENT SHANK EXPANSION SHANK EXPANSION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)NA 1-1/15 NA NA NA 1-7/10 NA NA12. HEAD SHAPE ROUND ROUND13. HEAD DIMENSIONS (inches)Thickness -- --Diameter 1.20 2.7514. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) NO YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2-3/4 GALVANIZED STEEL16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other MAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 90 MIN. 90 MIN.Gypsum NA NACementitious Wood Fiber NA NA18. ACCEPTED BY THE FOLLOWING CODESLightweight Concrete -- FM, UL, METRO-DADE COUNTYGypsum NA FM, UL, METRO-DADE COUNTYCementitious Wood Fiber NA NA19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable458

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksES PRODUCTS INC. ES PRODUCTS INC. FIRESTONE BUILDING PRODUCTSFM-60 BASE PLY FASTENER FM-45 BASE PLY FASTENER FIRESTONE POLYMER FASTENERSU.S. U.S. U.S.XXXXXXXXXSTEEL STEEL GLASS-REINFORCED NYLONHOT DIPPED G-90 GALVANIZED & URETHANE COATING HOT DIPPED G-90 GALVANIZED & URETHANE COATING NATWO-PIECE RECTANGULAR TWO-PIECE RECTANGULAR TAPERED ROOT, SPIRAL THREADNA NA GIMLETSHANK EXPANSION SHANK EXPANSION THREADEDNA 1-7/10 NA NA NA 1-1/15 NA NA 0.675 2 1/2 1-1/20.675 2-1/2 1 1-1/20.675 2-3/4 1-1/4 1-1/20.675 3 1-1/2 1-1/20.675 3-1/2 2 1-1/20.675 4 2-1/2 1-1/20.675 4-1/2 3 1-1/20.675 5 3-1/2 1-1/20.675 5-1/2 4 1-1/20.675 6 4-1/2 1-1/20.675 6-1/2 5 1-1/20.675 7 5-1/2 1-1/20.675 7-1/2 6 1-1/20.675 8 6-1/2 1-1/20.675 8-1/2 7 1-1/20.675 9 7-1/2 1-1/20.675 9-1/2 8 1-1/20.675 10 8-1/2 1-1/20.675 11 9-1/2 1-1/20.675 12 10-1/2 1-1/20.675 13 11-1/2 1-1/20.675 14 12-1/2 1-1/2ROUND ROUND ROUND, INTERNAL 1/4 IN. SQUARE DRIVE-- -- 0.1401.20 1.20 1.00NO NO NOYES YES YESROUND 2-3/4 GALVALUME ROUND 2-3/4 GALVALUME ROUND INSULATION 3 GALVALUMEROUND (IN-SEAM) 2 GALVALUMEMAGNETIC DRIVER (REQUIRED) MAGNETIC DRIVER (REQUIRED) IMPACT WRENCH, ELECTRIC DRILL (OPTIONAL)90 MIN. 90 MIN. NANA NA 600NA NA 450FM, UL, METRO-DADE COUNTY FM, UL, METRO-DADE COUNTY NAFM, UL, METRO-DADE COUNTY NA FMNA NA FMYES YES YES459

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME GAF MATERIALS CORP. GAF MATERIALS CORP.2. PRODUCT NAME TOGGLE BOLT (STAINLESS STEEL) TOGGLE BOLT (CARBON STEEL)3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply MembranesX6. MATERIAL TYPE STAINLESS STEEL CARBON STEEL7. COATING TYPE NA CR-10 FLUOROCARBON8. SHANK TYPE THREADED THREADED9. POINT TYPE NA NA10. METHOD OF ATTACHMENT TOGGLE BOLT PLUS WING THRU PREDRILLED HOLE TOGGLE BOLT PLUS WING THRU PREDRILLED HOLE11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.215 4 2-1/2 1-1/2 0.215 4 2-1/2 1-1/20.215 6 4-1/2 1-1/2 0.215 6 4-1/2 1-1/20.215 7 5-1/2 1-1/2 0.215 7 5-1/2 1-1/20.215 8 6-1/2 1-1/2 0.215 8 6-1/2 1-1/20.215 10 8-1/2 1-1/2 0.215 10 8-1/2 1-1/20.215 12 10-1/2 1-1/2 0.215 12 10-1/2 1-1/20.215 14 12-1/2 1-1/2 0.215 14 12-1/2 1-1/20.215 16 14-1/2 1-1/2 0.215 16 14-1/2 1-1/20.215 18 16-1/2 1-1/2 0.215 18 16-1/2 1-1/20.215 20 18-1/2 1-1/2 0.215 20 18-1/2 1-1/20.215 22 20-1/2 1-1/2 0.215 22 20-1/2 1-1/20.215 24 22-1/2 1-1/2 0.215 24 22-1/2 1-1/212. HEAD SHAPE ROUND TRUSS WITH #3 PHILLIPS ROUND TRUSS WITH #3 PHILLIPS13. HEAD DIMENSIONS (inches)Thickness 0.110 0.110Diameter 0.435 0.43514. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEELROUND 2 STEEL ROUND 2 STEELROUND 2 PLASTIC ROUND 2 PLASTICROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3 STEEL ROUND 3 STEELROUND 3 PLASTIC ROUND 3 PLASTIC16. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 600 600Gypsum 600 600Cementitious Wood Fiber 600 60018. ACCEPTED BY THE FOLLOWING CODESLightweight Concrete FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYGypsum FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYCementitious Wood Fiber19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable460

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksGAF MATERIALS CORP. GAF MATERIALS CORP. GAF MATERIALS CORP.IRON-LOK TOGGLE BOLT GAFTITE LITE-DECK GAFTITE BASE SHEET FASTENERU.S. U.S. U.S.XXXXXXXXX X XX X XCARBON STEEL HARDENED CARBON STEEL STEELENDURION WITH IRON-LOK ADHESIVE CR-10 FLUOROCARBON G-90 HOT DIPPED GALVANIZED OR CR-10 FLUOROCARBONTHREADED THREADED SPLIT BODYNA PINCH NATOGGLE BOLT PLUS WING THRU PREDRILLED HOLE THREADED SHANK EXPANSION0.215 4 2-1/2 1-1/2 0.310 3 1 2 NA 1.81 NA NA0.215 6 4-1/2 1-1/2 0.310 4 2 2 NA 1.200.215 7 5-1/2 1-1/2 0.310 5 3 20.215 8 6-1/2 1-1/2 0.310 6 4 20.215 10 8-1/2 1-1/2 0.310 8 6 20.215 12 10-1/2 1-1/2 0.310 9 7 20.215 14 12-1/2 1-1/2 0.310 10 8 20.215 16 14-1/2 1-1/2 0.310 12 10 20.215 18 16-1/2 1-1/20.215 20 18-1/2 1-1/20.215 22 20-1/2 1-1/20.215 24 22-1/2 1-1/2ROUND TRUSS WITH #3 PHILLIPS ROUND #3 PHILLIPS RECTANGULAR WITH ROUNDED CORNERS0.110 -- --0.435 0.558 1 X 1.3YES YES NOYES YES YESROUND 2 STAINLESS STEEL ROUND 3 STEEL ROUND 2-3/4 G-90 GALVANIZED &ROUND 2 STEEL GALVALUMEROUND 2 PLASTICROUND 3 STAINLESS STEELROUND 3 STEELROUND 3 PLASTICREQUIREDREQUIREDMALLET (REQUIRED)600 NA 40 MIN.600 450 40 MIN.600 450 NAFM, UL, METRO-DADE COUNTYNANAYES YES NOXX461

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME GAF MATERIALS CORP. HILTI INC.2. PRODUCT NAME TOGGLE-LESS MAGNUM/EVERGUARD POLYMER HILTI TOGGLE BOLT3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE NYLON CARBON STEEL (C1008)7. COATING TYPE NA ZINC PLATED8. SHANK TYPE SPIRAL THREAD THREADED9. POINT TYPE NA NA10. METHOD OF ATTACHMENT THREADED, SPIN WELD WITH & WIHTOUT WIRES PREDRILL HOLE11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.4375 2-1/2 1 1-1/2 0.215 4 2-3/4 1-1/40.4375 3 1-1/2 1-1/2 0.215 5 3-3/4 1-1/40.4375 3-1/2 2 1-1/2 0.215 6 4-3/4 1-1/40.4375 4 2-1/2 1-1/2 0.215 7 5-3/4 1-1/40.4375 4-1/2 3 1-1/2 0.215 8 6-3/4 1-1/40.4375 5 3-1/2 1-1/2 0.215 9 7-3/4 1-1/40.4375 5-1/2 4 1-1/2 0.215 10 8-3/4 1-1/40.4375 6 4-1/2 1-1/2 0.215 11 9-3/4 1-1/40.4375 6-1/2 5 1-1/2 0.215 12 10-3/4 1-1/40.4375 7 5-1/2 1-1/2 0.215 13 11-3/4 1-1/40.4375 7-1/2 6 1-1/2 0.215 14 12-3/4 1-3/40.4375 8 6-1/2 1-1/2 0.215 15 13-3/4 1-1/40.4375 8-1/2 7 1-1/2 0.215 16 14-3/4 1-3/40.4375 9 7-1/2 1-1/2 0.215 17 15-3/4 1-3/40.4375 9-1/2 8 1-1/2 0.215 18 16-3/4 1-1/40.4375 10 8-1/2 1-1/2 0.215 19 17-3/4 1-1/40.215 20 18-3/4 1-1/40.215 22 20-3/4 1-1/40.215 23 21-3/4 1-1/40.215 24 22-3/4 1-1/412. HEAD SHAPE DOUBLE HEX TRUSS13. HEAD DIMENSIONS (inches)Thickness 0.100 0.111Diameter 1.0 0.43714. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND W/SPIKES 2 NYLON ROUND 2 G-90 GALVANIZEDROUND W/SPIKES 2 CARBON STEEL ROUND 2 GALFINROUND W/SPIKES 3 CARBON STEEL ROUND 3 G-90 GALVANIZEDROUND 3 GALFINROUND 3 CO-POLYMER16. INSTALLATION EQUIPMENTScrew Gun (optional/required) OPTIONAL REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)AIR WRENCH OR HANDSET TOLL (OPTIONAL)OtherELECTRIC IMPACT WRENCH/ELIMINATOR (OPTIONAL)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 375 480/590Gypsum 450 476/600Cementitious Wood Fiber 450 476/60018. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteFMGypsumFMCementitious Wood FiberFM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED XNA = not applicable462

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksITW BUILDEX ITW BUILDEX ITW BUILDEXPOLYMER GYPTEC LITE WEIGHT CONCRETE FASTENER 1.2 LITE WEIGHT CONCRETE FASTENERU.S. U.S. U.S.XXXXXXX X XX X XGLASS-FILLED NYLON G-90 STEEL G-90 STEELNA GRAY POLYMER BLACK POLYMERTHREADED AUGER TWO-PIECE RECTANGULAR TWO-PIECE RECTANGULARTAPERED NA NATHREADED SHANK EXPANSION SHANK EXPANSION0.430 2-3/4 1 -1/4 1-1/2 NA 1.7 NA NA NA 1.2 NA NA0.430 3 1-1/2 1-1/20.430 3-1/2 2 1-1/20.430 4 2-1/2 1-1/20.430 4-1/2 3 1-1/20.430 5 3-1/2 1-1/20.430 5-1/2 4 1-1/20.430 6 4-1/2 1-1/20.430 6-1/2 5 1-1/20.430 7 5-1/2 1-1/20.430 7-1/2 6 1-1/20.430 8 6-1/2 1-1/2ROUND, 1/4-IN. SQUARE RECESS ROUND ROUND0.130 -- --1.00 1.1 1.1YES NO YESYES YES YESSQUARE 3 X 3 GALVALUME ROUND 2.7 GALVALUME ROUND 2.7 GALVALUMEROUND 2 GALVALUMEREQUIRED7/16-IN. DRILL BIT (REQUIRED FOR GYPSUM) BX LITE DRIVE BX LITE DRIVENA 140 --528 -- --422 -- --NA FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYFM, METRO-DADE COUNTYFM, METRO-DADE COUNTYYES YES YESXX463

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME JOHNS MANVILLE INTERNATIONAL INC. JOHNS MANVILLE INTERNATIONAL INC.2. PRODUCT NAME NTB LWC CR BASE SHEET FASTENER3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight ConcreteXGypsumXCementitious Wood FiberX5. USED WITH:Insulation AttachmentXBuilt-Up MembranesXSingle-Ply MembranesX6. MATERIAL TYPE NYLON STEEL7. COATING TYPE NA CR-108. SHANK TYPE SPIRAL THREAD TWO-PIECE RECTANGULAR9. POINT TYPE NA NA10. METHOD OF ATTACHMENT THREADED, SPIN WELD WITH & WITHOUT WIRES SHANK EXPANSION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.4375 2-1/2 1 1-1/2 NA 1.75 NA 1.750.4375 3 1-1/2 1-1/20.4375 3-1/2 2 1-1/20.4375 4 2-1/2 1-1/20.4375 4-1/2 3 1-1/20.4375 5 3-1/2 1-1/20.4375 5-1/2 4 1-1/20.4375 6 4-1/2 1-1/20.4375 6-1/2 5 1-1/20.4375 7 5-1/2 1-1/20.4375 7-1/2 6 1-1/20.4375 8 6-1/2 1-1/212. HEAD SHAPE DOUBLE HEX SQUARE, ROUND13. HEAD DIMENSIONS (inches)Thickness 0.10 NADiameter 1.00 1-1/8 -- 2-3/414. PLATESRequired (yes/no) YES YES, NOAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND W/SPIKES 2 NYLON ROUND 2-3/4 GALVALUMEROUND/W/SPIKES 3 CARBON STEEL16. INSTALLATION EQUIPMENTScrew Gun (optional/required) OPTIONAL NAInstallation Tool With Screw Gun (optional/required)NASpecial Tool Needed (optional/required) AIR WRENCH OR HANDSET TOOL (OPTIONAL) NAOther ELECTRIC IMPACT WRENCH/ELIMINATOR (OPTIONAL) MALLET17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 375 40 MIN.Gypsum 450 --Cementitious Wood Fiber 450 --18. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteFM, METRO-DADE COUNTYGypsumFM, METRO-DADE COUNTYCementitious Wood FiberFM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable464

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksOLYMPIC MANUFACTURING GROUP/NTB FASTENERS OLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUPN.T.B. MAGNUM WITH & WITHOUT WIRES TOGGLE BOLT (STAINLESS STEEL) TOGGLE BOLT (CARBON STEEL)U.S. U.S. U.S.X X XX X XX X XX X XX X XXXNYLON STAINLESS STEEL CARBON STEELNA NA CR-10 FLUOROCARBONSPIRAL THREAD THREADED THREADEDNA NA NATHREADED, SPIN WELD WITH & WITHOUT WIRES TOGGLE BOLT PLUS WING THRU PREDRILLED HOLE TOGGLE BOLT PLUS WING THRU PREDRILLED HOLE0.4375 2-1/2 1 1-1/2 0.215 4 2-1/2 1-1/2 0.215 4 2-1/2 1-1/20.4375 3 1-1/2 1-1/2 0.215 6 4-1/2 1-1/2 0.215 6 4-1/2 1-1/20.4375 3-1/2 2 1-1/2 0.215 7 5-1/2 1-1/2 0.215 7 5-1/2 1-1/20.4375 4 2-1/2 1-1/2 0.215 8 6-1/2 1-1/2 0.215 8 6-1/2 1-1/20.4375 4-1/2 3 1-1/2 0.215 10 8-1/2 1-1/2 0.215 10 8-1/2 1-1/20.4375 5 3-1/2 1-1/2 0.215 12 10-1/2 1-1/2 0.215 12 10-1/2 1-1/20.4375 5-1/2 4 1-1/2 0.215 14 12-1/2 1-1/2 0.215 14 12-1/2 1-1/20.4375 6 4-1/2 1-1/2 0.215 16 14-1/2 1-1/2 0.215 16 14-1/2 1-1/20.4375 6-1/2 5 1-1/2 0.215 18 16-1/2 1-1/2 0.215 18 16-1/2 1-1/20.4375 7 5-1/2 1-1/2 0.215 20 18-1/2 1-1/2 0.215 20 18-1/2 1-1/20.4375 7-1/2 6 1-1/2 0.215 22 20-1/2 1-1/2 0.215 22 20-1/2 1-1/20.4375 8 6-1/2 1-1/2 0.215 24 22-1/2 1-1/2 0.215 24 22-1/2 1-1/20.4375 8-1/2 7 1-1/20.4375 9 7-1/2 1-1/20.4375 9-1/2 8 1-1/20.4375 10 8-1/2 1-1/2DOUBLE HEX ROUND TRUSS WITH #3 PHILLIPS ROUND TRUSS WITH #3 PHILLIPS0.100 0.110 0.1101.00 0.435 0.435YES YES YESYES YES YESROUND W/SPIKES 2 NYLON ROUND 2 STAINLESS STEEL ROUND 2 STAINLESS STEELROUND W/ SPIKES 3 CARBON STEEL ROUND 2 STEEL ROUND 2 STEELROUND 2 PLASTIC ROUND 2 PLASTICROUND 3 STAINLESS STEEL ROUND 3 STAINLESS STEELROUND 3 STEEL ROUND 3 STEELROUND 3 PLASTIC ROUND 3 PLASTICROUND 3-1/2 STEEL ROUND 3-1/2 STEELOPTIONAL REQUIRED REQUIREDELIMINATOR TOOL (OPTIONAL)ELECTRIC IMPACT WRENCH/ELIMINATOR (0PTIONAL)375 600 600450 600 600400 600 600FM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYFM, METRO-DADE COUNTY FM, METRO-DADE COUNTY FM, METRO-DADE COUNTYFM, METRO-DADE COUNTYYES YES YESX X X465

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME OLYMPIC MANUFACTURING GROUP OLYMPIC MANUFACTURING GROUP2. PRODUCT NAME IRON-LOK TOGGLE BOLT LITE-DECK3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight ConcreteXGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE CARBON STEEL HARDENED CARBON STEEL7. COATING TYPE CR-1O WITH IRON-LOK ADHESIVE CR-10 FLUOROCARBON8. SHANK TYPE THREADED THREADED9. POINT TYPE NA PINCH10. METHOD OF ATTACHMENT TOGGLE BOLT PLUS WING THRU PREDRILLED HOLE THREADED11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.215 4 2-1/2 1-1/2 0.310 3 1 20.215 6 4-1/2 1-1/2 0.310 4 2 20.215 7 5-1/2 1-1/2 0.310 5 3 20.215 8 6-1/2 1-1/2 0.310 6 4 20.215 10 8-1/2 1-1/2 0.310 8 6 20.215 12 10-1/2 1-1/2 0.310 9 7 20.215 14 12-1/2 1-1/2 0.310 10 8 20.215 16 14-1/2 1-1/2 0.310 12 10 20.215 18 16-1/2 1-1/20.215 20 18-1/2 1-1/20.215 22 20-1/2 1-1/20.215 24 22-1/2 1-1/212. HEAD SHAPE ROUND TRUSS WITH #3 PHILLIPS ROUND #3 SQUARE13. HEAD DIMENSIONS (inches)Thickness 0.110 --Diameter 0.435 0.55814. PLATESRequired (yes/no) YES YESAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND 2 STAINLESS STEEL ROUND 3 STEELROUND 2 STEELROUND 2 PLASTICROUND 3 STAINLESS STEELROUND 3 STEELROUND 3 PLASTICROUND 3-1/2 STEEL16. INSTALLATION EQUIPMENTScrew Gun (optional/required) REQUIRED REQUIREDInstallation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)Other17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 600 NAGypsum 600 450Cementitious Wood Fiber 600 45018. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteFM, METRO-DADE COUNTYGypsum FM, METRO-DADE COUNTY FM, UL, METRO-DADE COUNTYCementitious Wood FiberFM, UL, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable466

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksOLYMPIC MANUFACTURING GROUP POWERS FASTENERS POWERS FASTENERSOLYMPIC BASE SHEET FASTENER POWERS RAWL SPEED-LOCK TOGGLE POWERS RAWL POWERLITEU.S. U.S. U.S.X X XX X XXXXXX X XX X XSTEEL CARBON STEEL & STAINLESS STEEL DUPONT ZYTEL NYLONG-90 HOT DIPPED GALVANIZED & CR-10 FLUOROCARBON PERMA-SEAL FLUOROPOLYMER (ON CARBON STEEL BOLT ONLY) NASPLIT BODY ANNULAR THREAD HIGH THREAD WITH TAPPERED ROOTNA NA SHARPSHANK EXPANSION CLAMPING THREADED, SUBSTRATE COMPACTIONNA 1.75 NA NA 0.250 5 3-1/2 1-1/2 0.675 2 1/2 1-1/2NA 1.20 0.250 6 4-1/2 1-1/2 0.675 2-1/2 1 1-1/20.250 7 5-1/2 1-1/2 0.675 3 1-1/2 1-1/20.250 8 6-1/2 1-1/2 0.675 3-1/2 2 1-1/20.250 9 7-1/2 1-1/2 0.675 4 2-1/2 1-1/20.250 10 8-1/2 1-1/2 0.675 4-1/2 3 1-1/20.250 12 10-1/2 1-1/2 0.675 5 3-1/2 1-1/20.250 14 12-1/2 1-1/2 0.675 5-1/2 4 1-1/20.675 6 4-1/2 1-1/20.675 6-1/2 5 1-1/20.675 7 5-1/2 1-1/20.675 7-1/2 6 1-1/20.675 8 6-1/2 1-1/20.675 8-1/2 7 1-1/20.675 9 7-1/2 1-1/20.675 9-1/2 8 1-1/20.675 10 8-1/2 1-1/20.675 11 9-1/2 1-1/20.675 12 10-1/2 1-1/20.675 13 11-1/2 1-1/20.675 14 12-1/2 1-1/2RECTANGULAR WITH ROUNDED CORNERS PHILLIPS FLAT HEAD #3 RECESS 1/4" SQUARE DRIVE RECESS-- 0.042 0.1341 X 1.3 0.426 1.000NO YES YESYES YES YESROUND 2-3/4 G-90 GALVANIZED & ROUND 3 GALVALUME ROUND BARBED 2 GALVALUMEGALVALUME ROUND BARBED 3 GALVALUMEOPTIONALP090, P060MALLET (REQUIRED) APPROPRIATE DRILL & BIT FOR BASE MATERIAL (REQUIRED) APP. DRILL & BIT FOR BASE MAT'L/ IMPACT WRENCH REQUIRED40 MIN. 995 --NA 620 540NA 570 595FM, UL, METRO-DADE COUNTY FM FMFM, UL, METRO-DADE COUNTY FM FMNA FM FMYES YES YESXX467

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME SFSSTADLER INC. SFS STADLER INC.2. PRODUCT NAME INSUL-LILTE FM-90 BASE PLY3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsumXCementitious Wood FiberX5. USED WITH:Insulation AttachmentXBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE NYLON STEEL7. COATING TYPE NA HOT DIPPED G-90 GALVANIZED & URETHANE8. SHANK TYPE SPIRAL THREAD TWO-PIECE RECTANGULAR9. POINT TYPE GIMLET NA10. METHOD OF ATTACHMENT SUBSTRATE COMPACTION SHANK EXPANSION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.430 2 1/2 1-1/2 NA 1-/710 NA NA0.430 2-1/2 1 1-1/20.430 3 1-1/2 1-1/20.430 3-1/2 2 1-1/20.430 4 2-1/2 1-1/20.430 4-1/2 3 1-1/20.430 5 3-1/2 1-1/20.430 5-1/2 4 1-1/20.430 6 4-1/2 1-1/20.430 7 5-1/2 1-1/20.430 8 6-1/2 1-1/20.430 9 7-1/2 1-1/20.430 10 9-1/2 1-1/212. HEAD SHAPE ROUND ROUND13. HEAD DIMENSIONS (inches)Thickness 0.120 --Diameter 1.000 2.7514. PLATESRequired (yes/no) YES NOAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND BARBED 2 GALVALUMEROUND BARBED 3 GALVALUME16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)MAGNETIC DRIVER (REQUIRED)Special Tool Needed (optional/required)OtherIMPACT WRENCH17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 280 90 MIN.Gypsum 600 NACementitious Wood Fiber 450 NA18. ACCEPTED BY THE FOLLOWING CODESLightweight Concrete FM FM, METRO-DADE COUNTYGypsumFMCementitious Wood FiberFM19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKEDNA = not applicable468

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksSFS STADLER INC SFS STADLER INC. SIMPLEXTPR-THE PEEL RIVET BASE-LOK BASE-LOCISRAEL U.S. U.S.X X XX X XX X XXX X XXXALUMINUM ALLOY NYLON CARBON NYLON GLASS FIBER RESINNA NA NAHOLLOW RIVET BODY HIGH PROFILE THREAD HIGH PROFILE SPIRAL THREADPIERCING MANDRELL DRILL SPADE SHOVEL DRILL POINTCLAMPING THREADED THREADED0.250 1-1/4 1/4 1 0.562 1-5/8 NA 1-1/2 0.562 1.7 0.0625 1.50.250 2 1 10.250 3 2 10.250 4 3 10.250 5 4 10.250 6 5 10.250 7 6 10.250 8 7 10.250 9 8 10.250 10 9 1LOW PROFILE MUSHROOM ROUND ROUND0.075 0.059 0.1250.480 3.000 1.000YES NO NAYES -- NAROUND 2 GALVALUMEROUND 3 GALVALUMEREQUIREDREQUIRED WITH CLUTCHOPTIONALOPTIONALREQUIRED OPTIONAL OPTIONALNA509 186 186507 -- --374 165 191.5FM FM FM, DADE COUNTYFMDADE COUNTYFM FM, METRO-DADE COUNTY FM, DADE COUNTYYES YES YESX469

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME SIMPLEX SIMPLEX2. PRODUCT NAME TUBE-LOK RL TRUBE-LOK EGYD3. COUNTRY OF MANUFACTURE U.S. U.S.4. DECK TYPE:Lightweight Concrete X XGypsum X XCementitious Wood Fiber X X5. USED WITH:Insulation Attachment X XBuilt-Up Membranes X XSingle-Ply Membranes X X6. MATERIAL TYPE CARBON STEEL CARBON STEEL7. COATING TYPE RUST-LOK ELECTRO GALVANIZED YELLOW DICHROMATE8. SHANK TYPE BARBED BARBED9. POINT TYPE CHISEL CHISEL10. METHOD OF ATTACHMENT FISH HOOK & FRICTION FISH HOOK & FRICTION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0.168 1 0 1 0.168 1 0 10.168 1-3/4 1/4 1-1/2 0.168 1-3/4 1/4 1-1/20.168 2-1/2 1 1-1/2 0.168 2-1/2 1 1-1/20.168 3 1-1/2 1-1/2 0.168 3 1-1/2 1-1/20.168 3-1/2 2 1-1/2 0.168 3-1/2 2 1-1/20.168 4-1/2 3 1-1/2 0.168 4-1/2 3 1-1/20.168 5-1/2 4 1-1/2 0.168 5-1/2 4 1-1/20.168 6-1/2 5 1-1/2 0.168 6-1/2 5 1-1/212. HEAD SHAPE ROUND ROUND13. HEAD DIMENSIONS (inches)Thickness 0.037 0.037Diameter 1.000 1.00014. PLATESRequired (yes/no) NO NOAvailable From Manufacturer (yes/no) YES YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALPARABOLIC 2 GALVALUME PARABOLIC 2 GALVALUMEPARABOLIC 3 GALVALUME PARABOLIC 3 GALVALUME16. INSTALLATION EQUIPMENTScrew Gun (optional/required) NA NAInstallation Tool With Screw Gun (optional/required) NA NASpecial Tool Needed (optional/required) NA NAOther NA NA17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 120.2 120.2Gypsum 364.8 364.8Cementitious Wood Fiber 115.0 115.018. ACCEPTED BY THE FOLLOWING CODESLightweight Concrete DADE COUNTY DADE COUNTYGypsum DADE COUNTY DADE COUNTYCementitious Wood Fiber DADE COUNTY DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES YES20. SEE APPENDIX IF CHECKED X XNA = not applicable470

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber DecksSIMPLEX TRI-PLY TRU-FAST CORPORATIONTUBE-LOK B DEKLITE TL (TECTUM LIGHTWEIGHT)U.S. U.S. U.S.X X XX X XX X XX X XX X XX X XCARBON STEEL NYLON DUPONT ZYTEL NYLONBRIGH NA NABARBED SPIRAL THREAD SPIRAL THREADCHISEL GIMLET GIMLETFISH HOOK & FRICTION THREADED THREADED, SUBSTRATE COMPACTION0.168 1 0 1 0.750 2-1/2 3/4 1-3/4 0.430 2 1/2 1-1/20.168 1-3/4 1/4 1-1/2 0.750 3 1-1/4 1-3/4 0.430 2-1/2 1 1-1/20.168 2-1/2 1 1-1/2 0.750 3-1/2 1-3/4 1-3/4 0.430 3 1-1/2 1-1/20.168 3 1-1/2 1-1/2 0.750 4 2-1/4 1-3/4 0.430 3-1/2 2 1-1/20.168 3-1/2 2 1-1/2 0.750 4-1/2 2-3/4 1-3/4 0.430 4 2-1/2 1-1/20.168 4-1/2 3 1-1/2 0.750 5 3-1/4 1-3/4 0.430 4-1/2 3 1-1/20.168 5-1/2 4 1-1/2 0.750 5-1/2 5-3/4 1-3/4 0.430 5 3-1/2 1-1/20.168 6-1/2 5 1-1/2 0.750 6 4-1/4 1-3/4 0.430 5-1/2 4 1-1/20.750 6-1/2 6-3/4 1-3/4 0.430 6 4-1/2 1-1/20.750 7 5-1/4 1-3/4 0.430 6-1/2 5 1-1/20.750 7-1/2 5-3/4 1-3/4 0.430 7 5-1/2 1-1/20.750 8 6-1/4 1-3/4 0.430 7-1/2 6 1-1/20.750 8-1/2 6-3/4 1-3/4 0.430 8 6-1/2 1-1/20.750 9 7-1/4 1-3/4 0.430 8-1/2 7 1-1/20.750 9-1/2 7-3/4 1-3/4 0.430 9 7-1/2 1-1/20.750 10 8-1/4 1-3/4 0.430 9-1/2 8 1-1/20.430 10 8-1/2 1-1/2ROUND ROUND ROUND, 1/4-IN. RECESS0.037 0.125 0.1201.000 1.0 1.00NO YES YESYES YES YESPARABOLIC 2 GALVALUME ROUND 2 GALVALUME ROUND BARBED 2 GALVALUMEPARABOLIC 3 GALVALUME HEX 2-7/8 GALVALUME ROUND BARBED 3 GALVALUMENANANANAREQUIREDIMPACT WRENCH, ELECTRIC DRILL (OPTIONAL)120.2 200 280364.8 400 600115.0 320/250 450DADE COUNTYFMDADE COUNTYFMDADE COUNTYFMYES YES YESX471

Roof Fasteners: Lightweight Concrete, Gypsum,or Cementitious Wood Fiber Decks1. COMPANY NAME U.S. INTEC2. PRODUCT NAME DRILL-TEC LITE DECK3. COUNTRY OF MANUFACTURE U.S.4. DECK TYPE:Lightweight ConcreteXGypsumXCementitious Wood FiberX5. USED WITH:Insulation AttachmentXBuilt-Up MembranesSingle-Ply Membranes6. MATERIAL TYPE DUPONT ZYTEL NYLON7. COATING TYPE NA8. SHANK TYPE SPIRAL THREAD9. POINT TYPE GIMLET10. METHOD OF ATTACHMENT THREADED, SUBSTRATE COMPACTION11. SHANK DIAMETER (inches) / SHANK LENGTH (inches) /FASTENING RANGE THICKNESS (inches) / DECKPENETRATION (inches)0430 2 -- 1-1/20430 2-1/2 -- 1-1/20430 3 -- 1-1/20430 3-1/2 -- 1-1/20430 4 -- 1-1/20430 4-1/2 -- 1-1/20430 5 -- 1-1/20430 5-1/2 -- 1-1/20430 6 -- 1-1/20430 6-1/2 -- 1-1/20430 7 -- 1-1/20430 7-1/2 -- 1-1/20430 8 -- 1-1/20430 8-1/2 -- 1-1/20430 9 -- 1-1/20430 9-1/2 -- 1-1/20430 10 -- 1-1/212. HEAD SHAPE ROUND, 1/4-IN. RECESS13. HEAD DIMENSIONS (inches)Thickness 0.120Diameter 1.0014. PLATESRequired (yes/no)YESAvailable From Manufacturer (yes/no)YES15. PLATE SHAPE / DIMENSIONS (inches) / MATERIALROUND BARBED 3 GALVALUME16. INSTALLATION EQUIPMENTScrew Gun (optional/required)Installation Tool With Screw Gun (optional/required)Special Tool Needed (optional/required)OtherIMPACT WRENCH, ELECTRIC DRILL (REQUIRED)17. AVERAGE PULLOUT RESISTANCE (lbs.)Lightweight Concrete 280Gypsum 600Cementitious Wood Fiber 45018. ACCEPTED BY THE FOLLOWING CODESLightweight ConcreteGypsumFM, METRO-DADE COUNTYCementitious Wood FiberFM, METRO-DADE COUNTY19. MANUFACTURER WARRANTY AVAILABLE (yes/no) YES20. SEE APPENDIX IF CHECKEDNA = not applicable472

Appendix, Roof FastenersBMCA INSULATION PRODUCTS, INC.Lexsuco clips are installed using a rubber mallet.No power tools or power sources are required.Lexsuco clips hook under the deck, cannot backout, and are corrosion resistant. They areavailable in three sizes. Companion plates arerequired.CELOTEX CORPORATIONAnchorbond #12 HWH requires recessed 2 7/8-inch plate only. Anchorbond #12 not available in#3 phillips head in 6-inch lengths.CONSTRUCTION FASTENERS, INC., DEKFASTPRODUCT GROUPFasteners, steel decks: Dekfast #12 HWHrequires recessed 2 7/8-inch hex plate only.Stainless steel (Trimrite) screws require specialplates.Fasteners, wood decks: one-quarter-inchpenetration through the plywood is required on3/4-in. plywood decks. Stainless steel (Trimrite)screws require special plates.Fasteners, lightweight concrete decks:Deklite pull-out data is based on the following: (a)lightweight concrete, 2 1/2-in. penetration, (b)gypsum, 2-in. penetration, (c) cementitious woodfiber, 2-in. penetration.GAF MATERIALS CORPORATIONFor GAFTITE wood deck fasteners, 1/2-inchpenetration is required through plywood.The Fluted Concrete Nail is installed by drivinginto pre-drilled hole with carpenter or small sledgehammer (e.g., two lbs.). For GAFTITE ToggleBolts (carbon and stainless steel) and Iron-LokToggle Bolt, pullout values are expectedaverages. Actual pullouts may vary. 1.2-in. basesheet fastener is recommended.Iron-Lok Toggle Bolts can be used for anyapplication, but primary use is for membraneattachment of mechanically fastened single-plies.Factory-applied adhesives on threads preventloosening of toggle bolt assembly due tomembrane flutter. Lite-Deck Fasteners can beused in specially designed batten strip.GAFTITE #14-10 and #12-11 fasteners areavailable with a 1/4-in. hex head design.GAF MATERIALS CORPORATIONFor GAFTITE wood deck fasteners, 1/2-inchpenetration is required through plywood.The Fluted Concrete Nail is installed by drivinginto pre-drilled hole with carpenter or small sledgehammer (e.g., two lbs.). For GAFTITE ToggleBolts (carbon and stainless steel) and Iron-LokToggle Bolt, pullout values are expectedaverages. Actual pullouts may vary. 1.2-in. basesheet fastener is recommended.Iron-Lok Toggle Bolts can be used for anyapplication, but primary use is for membraneattachment of mechanically fastened single-plies.Factory-applied adhesives on threads preventloosening of toggle bolt assembly due tomembrane flutter. Lite-Deck Fasteners can beused in specially designed batten strip.GAFTITE #14-10 and #12-11 fasteners areavailable with a 1/4-in. hex head design.ITW BUILDEXITW Buildex Accutrac roof insulation fasteningtool installs fasteners and plates in a one-stepcontinuous process. The Accutrac tool wasdesigned exclusively to be used with ITW BuildexAccutrac fasteners and plates.The ITW Buildex Lite Weight ConcreteFastening System combines new packaging thatdoubles as a carrying pouch, a stand-up magneticdriver, and an assembled fastener and plate.The Hextra Plus and Roofgrip Plus systemsconbine the Hextra and Roofgrip fasteners with a3" round galvalume plate in a preassembled form.The Accufast tool installs the preassembled partsfrom a stand-up position.JOHNS MANVILLE INTERNATIONAL, INC.The UltraFast fastener line is available as a preassembledas UltraFast ASAP (metal plate) andUltraFast ASAP (plastic plate) or as separatescrews and plates.NATIONAL NAIL CORP.Round-Top and R/S Round Top round headseliminate tearing or cutting of felt and/or insulationroofing material.Plasti-Top fasteners are not to be used on hotbuilt-up roofs or if application temperaturesexceed 190 F for more than two minutes.473

Plasti-Cap fasteners are not to be used on hotbuilt-up roofs or if application temperaturesexceed 170 F for more than three minutes.Ardox H.T. Galvanized Concrete Fasteners areavailable in 50-lb. cartons or 100-count packages.OLYMPIC MANUFACTURING GROUP, INC.For Olympic wood deck fasteners, 1/2-inchpenetration is required through plywood.The Fluted Concrete Nail is installed by drivinginto pre-drilled hole with carpenter or small sledgehammer (e.g., two lbs.). For Olympic ToggleBolts (carbon and stainless steel) and Iron-LokToggle Bolt, pullout values are expectedaverages. Actual pullouts may vary.Iron-Lok Toggle Bolts can be used for anyapplication, but primary use is for membraneattachment of mechanically fastened single-plies.Factory-applied adhesives on threads preventloosening of toggle bolt assembly due tomembrane flutter. Lite-Deck Fasteners can beused in specially designed batten strip.Olympic HD #14 and STD #12 fasteners areavailable with a 1/4-in. hex head design.Base Sheet Fastener and Plate are alsoavailable assembled.For gypsum, the 1.2-in. base sheet fastener isrecommended.POWERS RAWL, POWERS FASTENERS, INC.The Woodie and specially designed Woodieplates are for attachment of insulation, single-plymembranes, or standing-seam metal roofing clipsto oriented strand board (OSB) or plywood roofdecks.#12 Hex Washer Head Deck Screws may beused with Powers Rawl 3-in. round recessedplates only.Speed Lock Toggles may be used for all decktypes and are preassembled with 3-in. roundplates for insulation attachment.#12 Deck Screws are also availablepreassembled to insulation plates.For further details and technical information onroofing fasteners and other anchoring andfastening systems, please consult the PowersRawl Fastening Systems Design Manualpublished by Powers Fasteners, Inc.Steel Deck: deck screws should penetratethrough a minimum 3/4" per FMRC 1-29.Wood Deck: deck screws should penetratethrough a minimum 1/4" in plywood decks that are3/4" thick per FMRC 1-29.SIMPLEX NAILS & FASTENERS, INC.Abbreviation Chart:Shank Type / Nail FinishB/ = Barbed Shank is recommended whenit is installed into a hard species ofwood, or if a high pull out resistance isnot desiredAG/= Annular Grooved is recommendedwhen it is installed into any type ofwood, or if the appropriate buildingcodes require a high pull outresistance/B = Bright Finish is recommended if it willnot be exposed to a corrosiveenvironment./EGYD = Electro Galvanized Yellow Dichromateis recommended if it is exposed to amoderately corrosive environment/RL= Rust-Lok is recommended if it isexposed to a highly corrosiveenvironmentEGS- = Electro Galvanized Steel isrecommended if it is exposed to amoderately corrosive environmentSS-= Stainless Steel is recommended if it isexposed to a highly corrosiveenvironmentWood Deck Nails:The 3/4≅ plywood average pull out resistance wasperformed by the American Plywood <strong>Association</strong>in accordance to the American Plywood<strong>Association</strong>’s testing procedure. The averagepullout resistance in a nominal 2≅ pine plank wasdone in the Simplex Nails & Fasteners TestingLab. Rust-Lok is the priority coating that will passthe thousand hour salt spray rust test.Original Round Metal Caps Nails are unique tothe roofing industry due to the fact that it is theonly cap nail that has the nail and the cap weldedtogether to prevent the nail from backing throughthe roofing membrane. These nails are used tosecure base sheets to the deck, flashing behindcounter flashing, back nailing of roof membrane,thin insulation to a wood deck and various othermiscellaneous roofing tasks.Insulation Round Metal Cap Nails are designedwith wider shanks and longer lengths in order toinstall all types of roofing insulation into wooddecks.Economy Round Metal Cap Nails is designed tobe less expensive by using friction to hold the474

shank to the cap instead of welding the shank tothe cap. It should be used in situations that wouldnot would not permit the nail to back through theroofing membrane.Square Head Metal Cap Nails are designed to bestrong and economical. It has an extra strong capwelded to the shank.Plex-Cap Plastic Cap Nails are designed to beaffordable and increase the rupture values ofsofter building products. It should be used tosecure roofing felt, insulation and polyfilm fortemporary roofing to wood decks.Coil <strong>Roofing</strong> Nails are designed with a high wirethat will allow it to fit all types of pneumatic nailguns. They have 120 nails per coils and 60 coilsper box.Tube-Loks are designed to secure felts, basesheets, insulation, shingles, slate, to low andsteep sloped cementitious wood fiber, gypsum,cellular and lightweight concrete decks. TheTube-Lok=s average pull out resistance wasperformed accordance with Dade County ProtocolPA 117 (A) testing procedure. Completeinstallation instruction are available from Simplexupon request.Concrete Deck Nails:The Zanchor Drive Nail=s average pull outresistance was performed by Law Engineering,Inc. in accordance to the ASTM E-488-90 testingprocedure using 4,000 psi concrete.Zanchor Drive Nails are designed to fit in to a predrilled1/4≅ hole and with a termination bar or theSimplex 2≅ & 3≅ plate in order to hold the baseflashing, base sheet or insulation board intostructural concrete, brick or mortar.Masonry Round Metal Cap Nails are designedwith a wide fluted hardened steel shank, weldedto a hardened steel cap. They should be used tosecure flashing behind counter flashing andvarious other miscellaneous roofing tasks intobricks or masonry joints.Lightweight Concrete, Gypsum, or CementitiousWood Fiber Decks Nails:Base-Loks are designed to give a superior holdfor base sheets while minimizing the destructionto the deck, by requiring less fasteners than anyequivalent method. The Base-Lok=s average pullout resistance was performed by TrinityEngineering, Inc. in accordance with Dade CountyProtocol PA 105 (A) and 117 (A) testingprocedure. The Base-Lok has been tested withmost of the leading base sheets for its rupturevalue and these results are available fromSimplex upon request. Base-Loks should beused to secure base sheets to low and steepsloped cementitious wood fiber, gypsum, cellularand lightweight concrete decks with the use of aclutched slow speed drill and a standard 1/4≅ hexhead bit.475

THIS PAGE LEFT BLANK INTENTIONALLY

Information on Section 4: Roof Cements and Coatings<strong>General</strong> InformationSection 4: Roof Cements and Coatings in the 2000edition of NRCA’s Low-Slope <strong>Roofing</strong> MaterialsGuide provides a comprehensive listing of cementsand coatings used in low-slope roofing. In addition, itprovides information on cold-applied roof systemsthat employ coating products or cements as theprimary weatherproofing medium and, in someinstances, adhesive and stabilizing properties.An index of the manufacturers included in Section 4:Roof Cements and Coatings and locations of theirspecific products within this section immediatelyfollows this Roof Cements and Coatings sections.Roof Cement and Coating ProductsInformation on roof cements and coatings ispresented in the guide in two parts: Part 1: <strong>General</strong>Information and Part 2: Technical Data.Specific listing information included in Part 1: <strong>General</strong>Information is as follows:1. Company name2. Product name3. Product description4. Uses5. Application methods6. Roof system description7. Country of manufacture and year of firstcommercial use8. Sales and technical information contactsIn Part 2: Test Results, specific information includedis as follows:1. Company name2. Product name3. Fire ratings4. Complies with ASTM standardsWarranty information for cold-applied membrane roofsystems is provided in Section 5: Roof MembraneWarranties.Users of the guide who are interested in additionalinformation regarding roof cements and coatings areencouraged to refer to The NRCA <strong>Roofing</strong> andWaterproofing Manual, Fourth Edition.479

<strong>Index</strong> to Cement and CoatingsCEMENT & COATINGSCEMENT & COATINGSINCOMPLETEINCOMPLETEACRYMAX TECHNOLOGIES INC. 482 677 ERSYSTEMS 493221 Brooke Street 530 Elastomeric <strong>Roofing</strong> Systems 537Media, PA 1906350 Medina Street610/566-7470 Loretto, MN 55357-0056FAX: 610/891-0834 612/479-6690 FAX: 612/479-6691E-mail:E-mail: ersinfo@ersystems.comWeb:Web: www.ersystems.comALCO-NVC, INC. 482 677 FIELDS COMPANY, LLC 495P.O. Box 14001 530 2240 Taylor Way 537Detroit, MI 48214 Tacoma, WA 98421800/323-0029 253/627-4098FAX: 313/331-4726 FAX: 253/383-2181E-mail: alconvc@aol.comE-mail:Web: www.alconvc.comWeb:ALUMINUM COATING MFRS. 483 677 GAF MATERIALS CORP. 4997301 Bessemer Avenue 531 1361 Alps Road 539Cleveland, OH 44127 Wayne, NJ 07470800/556-8030 973/628-3000 800/766-3411FAX: 216/341-5833 FAX: 973/628-3451E-mail: sales@alum.comE-mail:Web:Web: www.gaf.comAMERICAN TAR COMPANY 485 677 GARDNER ASPHALT CORP/APOC 499Division of Fields Company, LLC 532 DIVISION 5402240 Taylor Way P.O. Box 5449Tacoma, WA 98421 Tampa, FL 33675-5449253/627-4099 FAX: 813/248-6768FAX: 253/627-3859E-mail:E-mail:Web:ANDEK CORP. 487 677 GARLAND COMPANY, INC. 678P.O. Box 392 533 3800 E. 91st Street850 Glen Avenue Cleveland, OH 44105Moorestown, NJ 08057 216/641-7500888/88ANDEK FAX: 216/641-0633FAX: 888/44ANDEKE-mail:E-mail:Web:CELOTEX CORP. 488 677 GMX, INC. 5014010 Boy Scout Blvd. 533 9105 Way Avenue 541Tampa, FL 33607 Cleveland, OH 44105813/873-1700 216/641-7502FAX: 813/873-4080 FAX: 216/641-0633E-mail: celotex.comE-mail:Web:Web:CONKLIN CO. 489 677 GRUNDY DIV. OF HENRY CO. 502 678P.O. Box 155 533 1301 Herkimer St. 541Shakopee, MN 55379-0155 Joliet, IL 60432800/888-8838 815/726-5087 800/435-1210FAX: 612/496-4285 FAX: 815/726-7301E-mail: marketing@conklin.comE-mail:Web: www.conklin.comWeb:DEWITT PRODUCTS CO. 489 678 HENRY COMPANY 5055860 Plumer 535 2911 Slauson Avenue 543Detroit, MI 48209 Huntington, CA 90255313/554-0575 800/962-8599 213/583-5000FAX: 313/554-2171 FAX: 213/582-6429E-mail:E-mail:Web: ww.dewitt@globalbiz.comWeb:ECOLOGY ROOF SYSTEMS 491 KARNAK CORPORATION 508505 N. Tustin Avenue #188 535 330 Central Avenue 545Santa Ana, CA 92705 Clark, NJ 07066714/972-1001 732/388-0300 800/526-4236FAX: 714/972-1079 FAX: 732/388-9422E-mail:E-mail:Web: www.ecologyroofsystems.comWeb: www.karnakcorp.com480

<strong>Index</strong> to Cement and CoatingsCEMENT & COATINGSCEMENT & COATINGSINCOMPLETEINCOMPLETEKEMPER SYSTEMS, INC. 511 SPM THERMO-SHIELD INC. 522550 S. Michigan Street 546 Rt. 2, Box 208A 551Seattle, WA 98108 Custer, SD 57730206/767-9505 800/541-5455 605/673-3201FAX: 206/767-9531 FAX: 605/673-3200E-mail: kempersys.comE-mail: spm@thermoshield.comWeb:Web:KOKEM PRODUCTS INC. 511 SUNGUARD MARKETING CORP. 6784432 N.E. Davis 546 4432 N.E. DavisPortland, OR 97213 Portland, OR 97213503/235-9206 503/235-9206FAX: 503/235-9206 FAX: 503/235-9206E-mail:E-mail:Web:Web:METALRYLICS ACRYLIC-POLYESTER 511 TAMKO ROOFING PRODUCTS INC. 522ROOFING PRODUCTS 546 220 W. 4th Street, P.O. Box 1404 551142 N. 27th Street Joplin, MO 64802San Jose, CA 95116 417/624-6644408/280-7733 FAX: 417/624-8935FAX: 408/280-6329E-mail:E-mail: metacrylics@msn.comWeb: www.tamko.comMONSEY DIV OF HENRY CO. 513 669 TEXAS REFINERY CORP. 524 679336 Cold Stream Road 547 One Refinery Place, P.O. Box 711 553Kimberton, PA 19442 Ft. Worth, TX 76101800/523-0268 817/332-1161FAX: 610/933-4598 FAX: 817/332-2340E-mail:monsey-bakor.comE-mail:Web: www.texasrefinery.comNATIONAL COATINGS CORP. 517 TOPCOAT, INC. A SUBSIDIARY OF 524 6791201 Calle Suerte 549 GAF MATERIALS CORP. 553Camarillo, CA 9301224 Industrial Road805/388-7112 Walpole, MA 02081-1305FAX: 805/388-8140 800/323-0009E-mail: nationalcoatings.com FAX: 508/660-2471Web:E-mail:REPUBLIC POWDERED METALS 517 678 TREMCO INC. 5253735 Green Road 549 3735 Green Road 553Beachwood, OH 44122 P.O. Box 228069800/551-7081 Beachwood, OH 44122-8069FAX: 888/742-1759 216/292-5000E-mail: FAX: 216/766-5629Web:Web: www.tremcoroofing.comR.M. LUCAS CO. 518 678 UNIFLEX, INDUSTRIAL DIV. OF 527 6703211 South Wood Street 548 KOOL SEAL, INC. 555Chicago, IL 606081499 Enterprise Parkway773/523-4300 Twinsburg, OH 44087FAX 773/523-3290 216/425-4717E-mail: rmlucas@ix.netcam.com FAX: 216/425-9778web:E-mail:SOMAY PRODUCTS, INC. 678 UNIROOF CORPORATION 528 6764301 N.W. 35th Avenue P.O. Box 160135 555Miami, FL 33142-4382 Altamonte Springs, FL 37216-0133305/633-6333 407/869-5110FAX: 305/638-5524FAX:E-mail:E-mail:Web:Web:SOUTHWESTERN PETROLEUM 521 678 UNITED COATINGS 528CORP. (SWEPCO) 551 19011 E. Cataldo 555534 N. Main St., P.O. Box 961005 Greenacres, WA 99016Ft. Worth, TX 76161-0005 509/926-7143817/332-2336 800/877-9372 FAX: 519/928-1116FAX: 817/877-4047E-mail:E-mail: swepcousa.comWeb:481

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME ACRYMAX ACRYMAX ACRYMAX ALCO–NVC, ALCO-NVC, ALCO-NVC,TECHNOLOGIES TECHNOLOGIES TECHNOLOGIES INC. INC. INC.INC. INC. INC.2. PRODUCT NAME ACRYMAX ACRYMAX ACRYMAX #216 AF #269T AF SBS #269 AF SBSAF-130 AF-130 FR ACM 9000 FLASHING TROWEL PLUS ADHESIVECEMENT GRADE3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar Cement X XAsphalt EmulsionXModified Bitumen Coating or Cement X X XElastomeric Coating or Cement (specify type) ACRYLIC ACRYLIC3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available UNLIMITED WHT, GRAY, TAN BLACK BLACK BLACK BLACKSolids Content (% by volume) 51.0 51.0 50.0 68 ±2 68Weight Per Gallon (lbs.) 12.1 12.1 8.5 9.5 9 8Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1–2 1–2 1–2 48–72 30–40Coverage (gals./square) 2–5 2–5 2–6 8 8 1.5USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XModified Bitumen <strong>Roofing</strong> X X X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X X X XMetal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong> X X X X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong> XConcrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XMetal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong> X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>XRoll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep ProductsX4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X X X XReroofing/Maintenance X X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY BRUSH, SPRAY BRUSH, SPRAY TROWEL TROWEL BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NAROLLER ROLLER ROLLER SQUEEGEESee Built-Up <strong>Roofing</strong> Section If Checked X X6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS ACRYMAX + ACRYMAX + ACRYMAX +POLY 1 POLY 1 POLY 1REINFORCEMENT REINFORCEMENT REINFORCEMENT7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1979 1985 1989 1984 1986 19869. FOR SALES INFORMATION CONTACT: S. BENNING S. BENNING S. BENNING SALES SALES SALES800/553–0523 800/553–0523 800/553–0523 800/323–0029 800/323–0029 800/323–002910. FOR TECHNICAL INFORMATION CONTACT: S. BENNING S. BENNING S. BENNING TECH. DEPT. TECH. DEPT. TECH. DEPT.800/553–0523 800/553–0523 800/553–052311. SEE APPENDIX IF CHECKEDNA=not applicable482

Roof Cements and Coatings Part 1: <strong>General</strong> InformationALCO-NVC, ALCO-NVC, ALCO-NVC, ALCO-NVC, ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMINC. INC. INC. INC. COATING COATING COATING COATING COATING COATINGMANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS#214 AF #215 AF #207 #270 AF FIBRATED RUBBERIZED ROOF NO FIBER ASPHALT COLD-PROCESSALUMAGARD NON ALUMAGARD ASPHALT ROOF CAP LIQUID DAMP SURFACE EMULSION ROOF PRIMER ADHESIVEFIBRATED COAT FIBRATED COAT ROOF PRIMER MASTIC ROOF COATING ROOF COATING FIBERED EMULSIONXXX X X X XXXXNONFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED FIBRATEDALUMINUM ALUMINUM BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK40 + 58 + 70 65 46 45 48 648.5 8.8 7.2 8 7.9 8 8.2 8.6 7.4 8.08–24 8–24 4 6 24 24 12 12 4 241 1–1.5 1–1.5 2–2.5 2–3 2–3 2–3 2–3 0.5–1 1.5–3X X X X X X X XX X X XX X X X XXXX X X X XX X XX X XX X XX X XXXXXX X X X X X X XX X X X X X XXXXXXXXXBRUSH, SPRAY BRUSH, SPRAY BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, SPRAY,ROLLER ROLLER SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SPRAY SQUEEGEENA NA NA NA NA NANA NA NA NA NA NANA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1965 1965 1912 1990 1967 1967 1967 1967 1967 1967SALES SALES SALES SALES R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN800/323–0029 800/323–0029 800/323–0029 800/323–0029 800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030483

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMCOATING COATING COATING COATING COATING COATINGMANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS MANUFACTURERS2. PRODUCT NAME PLASTIC WET / DRY FLASHTITE GLAS–MASTIC NEOPRENE RUBBERIZEDCEMENT CEMENT RUBBER ROOF CEMENTCEMENT3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar Cement X X X X XAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)CEMENT3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDColor(s) Available BLACK BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 70 70 70 68 66 66Weight Per Gallon (lbs.) 9.5 9.5 9.5 9.3 9.1 9.3Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 24 24 24 24 24 24Coverage (gals./square) 4–8 4–8 4–8 4–8 4–8 4–8USES4A. SURFACINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Modified Bitumen <strong>Roofing</strong>Single-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>Coal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL TROWEL, TROWEL TROWEL TROWEL TROWELROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA NACAULKSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1967 1967 1967 1991 1994 19919. FOR SALES INFORMATION CONTACT: R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN R. KAPLAN800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–803010. FOR TECHNICAL INFORMATION CONTACT: C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE C. FRATIANNE800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–8030 800/556–803011. SEE APPENDIX IF CHECKEDNA=not applicable484

Roof Cements and Coatings Part 1: <strong>General</strong> InformationALUMINUM ALUMINUM ALUMINUM AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICANCOATING COATING COATING TAR TAR TAR TAR TAR TAR TARMANUFACTURERS MANUFACTURERS MANUFACTURERS COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY2.0# 2.0# 3.0# # 1818 # 1825 # 1826 #1840 #1850 #1857 #1858ALUMINUM ALUMINUM ALUMINUM ATOCOAT ATCOLAP RAINSTOP ATCOGARD ATOCGARD 2 ATCOSCREEN LIQUID SUNFIBERED NON-FI BERED FIBERED SHIELDX X X X X X X XXXFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED NONFIBRATEDALUMINUM ALUMINUM ALUMINUM BLACK BLACK BLACK BLACK BLACK ALUMINUM ALUMINUM61 44 608.8 7.9 9.0 7.8 8 7.2 8.4 8.4 7.5 7.824 24 24 24–144 24–144 24–144 6–48 6–48 8–24 8–241.5–3 0.5–1 1.5–3 2–6 2–6 2–6 3–12 3–12 0.75–1.5 0.75–1.5X X X X X X X X X XXXX X X X X X XX X XX X X X X X XX X XX X XX X XX X X X X X X XX X X X X X X XXXX X XXXX X XBRUSH, BRUSH, BRUSH, BRUSH, SPRAY BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, ROLLER, ROLLER,SPRAY SPRAY SPRAY SQUEEGEE SQUEEGEE SQUEEGEE SPRAY SPRAY SPRAY SPRAYNA NA NA ADHESIVE, ADHESIVE, NA ADHESIVE, SURFACING, SURFACING, SURFACING,FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTERNA NA NA ADHESIVE, ADHESIVE, NA ADHESIVE, SURFACING, SURFACING, SURFACING,FIELDS GLASS & FIELDS GLASS & FIELDS GLASS, FIELDS GLASS, FIELDS GLASS, FIELDS GLASS,POLYESTER POLYESTER SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLYNA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1967 1967 1926 1926 1926 1926 1926 1926 1926R. KAPLAN R. KAPLAN R. KAPLAN T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/556–8030 800/556–8030 800/556–8030 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098C. FRATIANNE C. FRATIANNE C. FRATIANNE B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/556–8030 800/556–8030 800/556–8030 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098485

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICANTAR TAR TAR TAR TAR TARCOMPANY COMPANY COMPANY COMPANY COMPANY COMPANY2. PRODUCT NAME # 1859 # 1860 # 1864 # 1866 PREMIUM # 1868 PREMIUM # 1868 PREMIUMATCOSHIELD ALUMINUM ATCOSHIELD 2 FIBERED ALUMINUM ALUMINUMASPHALT COAT ALUMINUM COAT COATING COATING3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating X X X X X XAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMSolids Content (% by volume)Weight Per Gallon (lbs.) 8.2 7.8 8.2 8.8 8.8 8.4Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 8–24 8–24 8–24 8–24 8–24 8–24Coverage (gals./square) 0.75–1.5 0.75–1.5 0.75–1.5 0.75–1.5 0.75–1.5 0.75–1.5USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X X X X XModified Bitumen <strong>Roofing</strong> X X X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) ROLLER, ROLLER, ROLLER, ROLLER, ROLLER, ROLLER,ROOF SYSTEM DESCRIPTION (or NA)SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS SURFACING, SURFACING, SURFACING, SURFACING, SURFACING, SURFACING,See Built-Up <strong>Roofing</strong> Section If CheckedFIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS SURFACING, SURFACING, SURFACING, SURFACING, SURFACING, SURFACING,See Modified Bitumen <strong>Roofing</strong> Section If CheckedFIELDS GLASS, FIELDS GLASS, FIELDS GLASS, FIELDS GLASS, FIELDS GLASS, FIELDS GLASS,SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1926 1926 1926 1926 1926 19269. FOR SALES INFORMATION CONTACT: T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409810. FOR TECHNICAL INFORMATION CONTACT: B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409811. SEE APPENDIX IF CHECKEDNA=not applicable486

Roof Cements and Coatings Part 1: <strong>General</strong> InformationAMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN ANDEK ANDEKTAR TAR TAR TAR TAR TAR TAR TAR CORP. CORP.COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY#4200 #5000 #1821 #1822 # 1823 #1897 #1898 FL #1326 RUBBERCOAT RUBBERCOATATCOWHITE ATCOBRITE RAINSEAL ROOF PATCH ATCOMASTIC FLAMEBLOC FLAMEBLOC ATCOSTOP BASE 1047XXXXACRYLIC LATEX ACRYLIC LATEX RESINFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATEDBLACK BLACK BLACK ALUMINUM ALUMINUM BLACK BLACK GRAY55 6211.5 12 8 8.8 8 8.5 8.2 7.2 8.2 9.18–24 8–24 6–12 6–12 6–12 8–24 8–24 4–8 12 241.5–2 1.5–2 0.75–1.5 0.75–1.5 1–3 1.5-2.5 1.5-2.5X X X X X XX X X X X XX X X X X XX X X XX X X XX X X XX X X XX X X XXXXXX X XX X XX X XX X XX X X X X XXX X X XXXXXXROLLER, ROLLER, CAULK TROWEL TROWEL ROLLER, ROLLER, ROLLER, BRUSH, BRUSH, SPRAY,SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY ROLLERSURFACING, SURFACING, NA NA NA SURFACING, SURFACING, NA NA NAFIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER POLYESTERSURFACING, SURFACING, NA NA NA SURFACING, SURFACING, NA NA NAFIELDS GLASS, FIELDS GLASS, FIELDS GLASS, FIELDS GLASS,SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLYNA NA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1926 1926 1926 1926 1926 1926 1926 1975 1989 1993T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA H. LISS H. LISS800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/800–2844 800/800–2844B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN N. SHEARER N. SHEARER800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/800–2844 800/800–2844487

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME ANDEK CELOTEX CELOTEX CELOTEX CELOTEX CELOTEXCORP. CORP. CORP. CORP. CORP. CORP.2. PRODUCT NAME SILVER FILM ELASTIGUM NOAH'S PITCH S.I.S. ADHESIVE AWP SBSROOFERS PLASTIC ALL WEATHER MOD BITCEMENT COMPOUND PLASTIC CEMENT ADHESIVE3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar Cement X X X XAsphalt EmulsionModified Bitumen Coating or CementXElastomeric Coating or Cement (specify type)RESIN3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDColor(s) Available SILVER BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 75Weight Per Gallon (lbs.) 8.7Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 24Coverage (gals./square) 0.25-0.33 1.5 1.5USES4A. SURFACINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XModified Bitumen <strong>Roofing</strong>XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X X XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong> X X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XMetal <strong>Roofing</strong>Other <strong>Roofing</strong> X X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>Coal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X XCold-Process Modified <strong>Roofing</strong>XRoll <strong>Roofing</strong> (Coated Sheets) X X XShingles, Tiles Other Steep Products X X X4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)XX(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, TROWEL TROWEL BRUSH, TGR BRUSH,ROOF SYSTEM DESCRIPTION (or NA)ROLLER SQUEEGEE SQUEEGEE6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 19849. FOR SALES INFORMATION CONTACT: H. LISS CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX800/800–2844 REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL10. FOR TECHNICAL INFORMATION CONTACT: N. SHEARER SALES SALES SALES SALES SALES800/800–2844 OFFICE OFFICE OFFICE OFFICE OFFICE11. SEE APPENDIX IF CHECKEDNA=not applicable488

Roof Cements and Coatings Part 1: <strong>General</strong> InformationCELOTEX CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX CONKLIN CONKLIN DEWITT DEWITTCORP. CORP. CORP. CORP. CORP. CORP. CO., INC. CO., INC. PRODUCTS PRODUCTSCO.CO.SBS ALUMINUM ALUMINUM ELASTIGUM ASPHALT FLAT TOP RAPID ROOF BENCHMARK PRO FLASH PRO WET /MOD BIT ROOF COATING ROOF COATING ROOF COATING PRIMER EMULSION III FLASHING STICK FLASHINGFLASHING CEMENT (FIBERATED) (NONFIBRATED) CEMENT CEMENT WET/DRYXX X X XXXXACRYLICACRYLICFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATEDBLACK ALUMINUM ALUMINUM BLACK BLACK BLACK WHITE/TAN/GRAY WHITE/GRAY BLACK BLACK51.3–54.5 54.0–55.0 72.9 74.411.3 10.4–10.8 9.0 9.02–8 2–8 48–72 48–721.5 1.5 1.5 1.5 3 3–4 3–4 0.7–1 0.7–1X X X X X X X XX X X X X XX X XX X X X X X X XX X X X XX X X X XX X X XX X X X XXXXX X X XX X X XXXX X X XX X X XX X XX X X XXXXXXXXXXTROWEL BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, ROLLER, ROLLER, TROWEL TROWELROLLER ROLLER ROLLER ROLLER ROLLER SPRAY SPRAYNA NA NA NA NA NA NA NANA NA NA NA NA NA NA NANA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1994 1991 1931 1951CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX CELOTEX BLDG PROD DIV BLDG PROD DIV D. MCCLELLAN D. MCCLELLANREGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL 800/888-8838 800/888-8838 800/962–8599 800/962–8599SALES SALES SALES SALES SALES SALES BLDG PROD DIV BLDG PROD DIV J. MCCLELLAN J. MCCLELLANOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE 800/888-8838 800/888-8838 800/962–8599 800/962–8599489

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME DEWITT DEWITT DEWITT DEWITT DEWITT DEWITTPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSCO. CO. CO. CO. CO. CO.2. PRODUCT NAME PRO COAT PRO PRIIMER PRO PRO ASPHALT PRO ASPHALT PROLAPFIBER ASPHALT RESATURANT EMULSION EMULSION CEMENTROOF COATING ASPHALT (FIBRE) (NO FIBRE)3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt Primer X XAsphalt/Coalt Tar Coating X XAsphalt/Coal Tar CementAsphalt Emulsion X XModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED FIBRATEDColor(s) Available BLACK BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 70.9 72.1 76.3 48.5 47.4 71.3Weight Per Gallon (lbs.) 8.2 7.7 8.3 9.0 9.0 81.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 8 4 8 5 5Coverage (gals./square) 5 10 2–3 2.5 2.5 5USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X X X X XModified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>XConcrete/Wood DecksXMetalX4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X X X XReroofing/Maintenance X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) SPRAY, BRUSH SPRAY, ROLL SPRAY, BRUSH SPRAY, ROLL SPRAY, ROLL SPRAY,ROOF SYSTEM DESCRIPTION (or NA)SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1931 1931 1992 1991 1991 19919. FOR SALES INFORMATION CONTACT: D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–859910. FOR TECHNICAL INFORMATION CONTACT: J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–859911. SEE APPENDIX IF CHECKEDNA=not applicable490

Roof Cements and Coatings Part 1: <strong>General</strong> InformationDEWITT DEWITT DEWITT DEWITT DEWITT DEWITT ECOLOGY ECOLOGY ECOLOGY ECOLOGYPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS ROOF ROOF ROOF ROOFCO. CO. CO. CO. CO. CO. SYSTEMS SYSTEMS SYSTEMS SYSTEMSPRO SBS PRO SBS PRO ROOFLOX 300 PRO BRITE 200 PRO SILVERFIBRE PRO SILVER ERS 301 ESR 300A ERS 300 T ERS 304ADHESIVE FLASHING ALUMINUM ALUMINUM SHIELD 300 ALUM SHIELD 200 ALUMCEMENT FIBRE COATING FIBRE COATING COAT NO FIBRE COAT NO FIBREXX X X X X X XXXFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATEDBLACK BLACK ALUMINUM ALUMINUM ALUMINUM ALUMINUM BLACK BLACK BLACK BLACK69.6 70.9 54.5 54.8 30.5 30.5 68.2 75 78 757.9 9.0 9.5 8.7 8.2 8.2 9 9.5 9.8 9.548–72 8 8 8 8 4 48 - 72 48 - 72 48 - 725 07–1 5 5 15 15 1 8 8 9X X X X X XX X X X X XX X X XX X X X X XX X X X X XX X X X X XX X X X X XX X X X X XXXX X X XX X X XXXX X X XXXXXXXXXSPRAY, TROWEL SPRAY, SPRAY, SPRAY, TROWEL BRUSH, SPRAY TROWEL TROWEL TROWELSQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE ROLLERNA NA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NANA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1987 1987 1991 1931 1987 1987 1988 1988 1988 1988D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN D. MCCLELLAN E. NELSON E. NELSON E. NELSON E. NELSON800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN J. MCCLELLAN B. PFIEFER B. PFIEFER B. PFIEFER B. PFIEFER800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599 800/962–8599491

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME ECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGY ECOLOGYROOF ROOF ROOF ROOF ROOF ROOFSYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS SYSTEMS2. PRODUCT NAME ERS 302 ERS 309 ERS 100 ERS 200 ERS 305 ERS 307A3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating X X XAsphalt/Coal Tar CementAsphalt EmulsionXModified Bitumen Coating or Cement X XElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED BOTH BOTH NONFIBRATED FIBRATEDColor(s) Available BLACK BLACK BLACK BLACK ALUMINUM BLACKSolids Content (% by volume) 60 60 45 45 58 68Weight Per Gallon (lbs.) 9.2 9.2 9.0 9.0 9.1 9.1Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 48 - 72 48 - 72 24 - 48 24 - 48 24 - 48 96Coverage (gals./square) 2 - 3 2 - 3USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XModified Bitumen <strong>Roofing</strong> X X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X XCold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets) X XShingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X XReroofing/Maintenance X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, BRUSH, BRUSH, BRUSH, BRUSH, BRUSH,ROOF SYSTEM DESCRIPTION (or NA)SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS ERS 302 PLUS ERS 309 PLUS NA NA NA NA2-3 PLIES 2-3 PLIESERS ROOFING ERS ROOFING7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1988 1988 1988 1988 1988 19889. FOR SALES INFORMATION CONTACT: E. NELSON E. NELSON E. NELSON E. NELSON E. NELSON E. NELSON10. FOR TECHNICAL INFORMATION CONTACT: B. PFIEFER B. PFIEFER B. PFIEFER B. PFIEFER B. PFIEFER B. PFIEFER11. SEE APPENDIX IF CHECKEDNA=not applicable492

Roof Cements and Coatings Part 1: <strong>General</strong> InformationECOLOGY ECOLOGY ECOLOGY ECOLOGY ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMSROOF ROOF ROOF ROOFSYSTEMS SYSTEMS SYSTEMS SYSTEMSERS 307T ERS 308 ERS 315 ERS 306 PRIMER / HER 202 FG ERATHANE 300 ERAKOTE ERATHANE 300 ERAGUARDSURFACER BASE COAT 2000XXXXURETHANE URETHANE URETHANE URETHANE URETHANE MOD. ACRYLICFIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATEDBLACK ALUMINUM BLACK BLACK ALUM GRAY ALUM GRAY ALUM GRAY GRAY, WHITE GRAY GRAY68 60 79 60 51 89 65 65 83 369.1 9.2 9.9 9.2 8.8 10.0 9.0 9.5 9.3 9.196 24 - 48 48 - 72 48 - 72 2 24 24 24 15 10.5 0.5 1.0 1.0–1.5 1.0–2.0 0.5X X X XX X X XX X X XX X XX X X X X X XX X XX X XX X X X X X XX X X X X XXXX X X XX X XX X XX X X XXXXXXXX X XX X X X X XBRUSH, BRUSH, TROWEL TROWEL BRUSH, SPRAY BRUSH SPRAY, SPRAY, SPRAY, BRUSH, SPRAY,SPRAY SPRAY ROLLER ROLLER ROLLER ROLLER ROLLERNA NA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NA NANA NA NA NA PRIMER/ SUR- PRIMER/ SUR- PRIMER/ SUR- PRIMER/ SUR- ERATHANE 300, BASECOAT, ERAGUARD 2000,FACER, HER 202, FACER, HER 202, FACER, HER 202, FACER, HER 202, BASECOAT, HER 202,ERATHANE 300 ERATHANE 300 ERATHANE 300 ERAKOTE ERATHANE 300 ERAGUARD 1000USA USA USA USA USA USA USA USA USA USA1988 1988 1988 1988 1979 1977 1977 1985 1992 1992E. NELSON E. NELSON E. NELSON E. NELSON T. LEONARD T. LEONARD T. LEONARD T. LEONARD T. LEONARD T. LEONARD800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747B. PFIEFER B. PFIEFER B. PFIEFER B. PFIEFER J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747X X X X X X493

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS2. PRODUCT NAME ERAGUARD ERAGUARD ERAGUARD ERAGUARD ERAGUARD ERAGUARD1000 1100 1001 4000 6000 5003.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) ACRYLIC ACRYLIC ACRYLIC SILICONE HYPALON ACRYLIC3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBEREDColor(s) Available GRAY, WHITE GRAY, WHITE UNLIMITED GRAY, WHITE WHITE GRAY, WHITESolids Content (% by volume) 52 55 39 65 29 50Weight Per Gallon (lbs.) 12.0 11.8 9.0 11 10 12Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 6 10 3 2–4 24 6Coverage (gals./square) 1.0–4.0 1.0–4.0 0.75–1.0 3.0 1.0–3.0 1.0–4.0USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XModified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong> X X X XOther <strong>Roofing</strong> X X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XMetal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X X XOther <strong>Roofing</strong> X X X X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X XReroofing/Maintenance X X X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS ERAGUARD 2000,HER 202,ERAGUARD 10007. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1990 1995 1995 1990 1990 19959. FOR SALES INFORMATION CONTACT: T. LEONARD T. LEONARD T. LEONARD T. LEONARD T. LEONARD T. LEONARD800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–774710. FOR TECHNICAL INFORMATION CONTACT: J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD J. LEONARD800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–7747 800/403–774711. SEE APPENDIX IF CHECKED X X X X X XNA=not applicable494

Roof Cements and Coatings Part 1: <strong>General</strong> InformationERSYSTEMS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLCERATHANE 300 F100 C100 M100 F150 F110 F400 F540, 500 F630, F640, F650 F600BASE COAT POWRCOAT ROOF COAT RUBR COAT POWERSEAL POWRLAP POWRPRIME ALUMINUM FIBERED FLAMEBLOCBRUSHABLE COATING ALUM COATXX X X X X X XPOLYURETHANEXNONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATEDGRAY BLACK BLACK BLACK BLACK BLACK BLACK ALUMINUM ALUMINUM ALUMINUM839.4 7.8 7.3 7.6 7.8 8.0 7.0 7.5-8.0 7.5-8.2 8.015 24–144 24–144 24–144 24–144 24–144 4–8 8–24 8–24 8–241.0–2.0 2–6 2–6 2–6 2–6 2–6 0.5–1 0.75–1.50 0.75–1.50 0.75–1.50X X X X X X X X XX X X XX X X X XXX X X X X X X X XX X X X X XXX X X X XX X X X X XXXXXXX X X X X X X XX X X X X X XX X X X X XX X X X XX X X X XX X X X XXBRUSH, SPRAY, BRUSH, SPRAY BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, ROLLER, ROLLER, ROLLER, ROLLER,ROLLER SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SPRAY SPRAY SPRAY SPRAY SPRAYNA ADHESIVE, ADHESIVE, ADHESIVE, ADHESIVE, ADHESIVE, NA SURFACING, SURFACING, SURFACING,FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESER POLYESER POLYESERX X X X X X XNA ADHESIVE, ADHESIVE, ADHESIVE, ADHESIVE, ADHESIVE, NA SURFACING, SURFACING, SURFACING,FIELDS GLASS, FIELDS GLASS , FIELDS GLASS , FIELDS GLASS , FIELDS GLASS , FIELDS GLASS FIELDS GLASS FIELDS GLASSSEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLYNA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1996 1975 1975 1994 1975 1975 1975 1975 1975 1975T. LEONARD T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/403–7747 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098J. LEONARD B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/403–7747 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098X495

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC2. PRODUCT NAME F670 M860 M850 F700 M700 F750MOBLSHIELD POLRBRITE POLRSHIELD POWRGARD RUBRGARD POWRGARD 23.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating XAsphalt/Coal Tar CementAsphalt Emulsion X X XModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) ACRYLIC LATEX ACRYLIC LATEX3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATEDColor(s) Available ALUMINUM WHITE WHITE BLACK BLACK BLACKSolids Content (% by volume)Weight Per Gallon (lbs.) 7.7 12 11.5 8.3 8.4 8.3Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 8–24 8–24 8–24 6–48 6–48 6–48Coverage (gals./square) 0.75–1.50 1.50–2.0 1.50–2.0 3–12 3–4 3–12USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X XModified Bitumen <strong>Roofing</strong> X X X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>XRoll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) ROLLER, ROLLER, ROLLER, BRUSH, BRUSH, BRUSH,ROOF SYSTEM DESCRIPTION (or NA)SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS SURFACING, SURFACING, SURFACING, SURFACING, ADHESIVE, SURFACING,FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESER POLYESER POLYESER POLYESER POLYESTER POLYESERSee Built-Up <strong>Roofing</strong> Section If Checked X X X X6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS SURFACING, SURFACING, SURFACING, SURFACING, ADHESIVE, SURFACING,See Modified Bitumen <strong>Roofing</strong> Section If CheckedFIELDS GLASS FIELDS GLASS FIELDS GLASS FIELDS GLASS FIELDS GLASS, FIELDS GLASSSEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY SEBS & POLY6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1975 1975 1975 1975 1975 19759. FOR SALES INFORMATION CONTACT: T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409810. FOR TECHNICAL INFORMATION CONTACT: B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409811. SEE APPENDIX IF CHECKEDNA=not applicable496

Roof Cements and Coatings Part 1: <strong>General</strong> InformationFIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLCM800 F880 F200 C200 C250 F300 M300 C240 M620 M200RUBRSTAR SUNGARD POWRBOND ROOFBOND ROOFFLASH POWRMASTIC RUBRMASTIC TILEBOND SILVERMASTIC RUBRBONDX X X X XXXX X XALKYD RESINNONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDGRAY ALUMINUM BLACK BLACK BLACK BLACK BLACK BLACK ALUMINUM BLACK9.6 8.8 8.8 8.1 8.2 8.2 8.3 8.1 9.3 8.36–18 6–48 6–12 6–12 6–12 6–12 6–12 6–12 6–12 6–122–4 2–3XXXXXXXXX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XX X X X X X X XXXXXXBRUSH, BRUSH, TROWEL TROWEL TROWEL TROWEL, CAULK TROWEL, TROWEL TROWEL TROWELSPRAY SPRAY CAULKSURFACING, SURFACING, NA NA NA NA NA NA NA NAFIELDS GLASS & FIELDS GLASS &POLYESER POLYESERSURFACING, SURFACING, NA NA NA NA NA NA NA NAFIELDS GLASS FIELDS GLASSSEBS & POLY SEBS & POLYNA NA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1975 1975 1975 1975 1975 1975 1975 1975 1975 1975T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098497

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC2. PRODUCT NAME C300 M400 F460 M150 M600 M630ROOF MASTIC RUBRPRIME WATERSTOP RUBRSEAL FIREBLOC SILVERSHIELD 33.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt Primer X XAsphalt/Coalt Tar Coating X XAsphalt/Coal Tar CementXAsphalt EmulsionModified Bitumen Coating or CementXElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATEDColor(s) Available BLACK BLACK BLACK BLACK ALUMINUM ALUMINUMSolids Content (% by volume)Weight Per Gallon (lbs.) 8 7 7.2 7.6 8 8.1Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 6–12 4–8 4–8 24–144 8–24 8–24Coverage (gals./square) .75–1.5 .75–1.5USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X XModified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4C. PRIMINGBuilt-Up <strong>Roofing</strong> X XConcrete/Wood Decks X XMetal X X4D. FLASHINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>XRoll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL ROLLER, ROLLER, BRUSH, SPRAY, ROLLER, ROLLER,ROOF SYSTEM DESCRIPTION (or NA)SPRAY SPARY SQUEEGEE SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA ADHESIVE, SURFACING, SURFACING,See Built-Up <strong>Roofing</strong> Section If CheckedFIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA ADHESIVE, SURFACING, SURFACING,See Modified Bitumen <strong>Roofing</strong> Section If CheckedFIELDS GLASS & FIELDS GLASS & FIELDS GLASS &POLYESTER POLYESTER POLYESTER6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1975 1975 1975 1975 19759. FOR SALES INFORMATION CONTACT: T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA T. VANDERLINDA800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409810. FOR TECHNICAL INFORMATION CONTACT: B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN B. SHEIN800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–4098 800/627–409811. SEE APPENDIX IF CHECKEDNA=not applicable498

Roof Cements and Coatings Part 1: <strong>General</strong> InformationGAF GAF GAF GAF GAF GAF GAF GAF GARDNER / GARDNER /MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS MATERIALS APOC APOCCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.GAF PREMIUM GAF ALUMINUM GAF ASPHALT / GAF ALUMINUM GAF RUBERIOD RUBEROID GAF JETBLACK APOC 101 APOC 103FIBERED ALUM ROOF PAINT CONCRETE EMULSION WEATHERCOAT MODIFIED BITUMEN MODIFIED BITUMEN PREMIUM PLASTIC ASPHALTROOF COATING PRIMER EMIULSION ADHESIVE FLASHING CEMENT FLASHING CEMENT CEMENT PRIMERXXXXXXXXXXFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBERED NON-FIBEREDALUMINUM ALUMINUM BLACK ALUMINUM BLACK BLACK BLACK BLACK52–56 48–52 61 45 49 58 76–80 75–78 80 608.1–8.5 7.8–8.2 7.4 9.0 9.0 8–8.4 10.1–10.5 8.6–9.0 8.58 4 4 24 5 24 6 6–8 4-8 2-81.5–2.0 0.5 0.5 1–1.5 3–5 1.5 8.0 8.0 12 15X X X X X XX X X X X XX X XX X X XX X XX X XX X XX X XXXXXXXX X XX X XX X XX X XXXXBRUSH, ROLLER, BRUSH, BRUSH, BRUSH, SPRAY, BRUSH, SPRAY BRUSH, SPRAY, TWROWEL, TROWEL, TROWEL BRUSH,SPRAY SPRAY SPRAY ROLLER SQUEEGEE NOTCH, SQUEEGEE CAULK CAULK SPRAYNA NA NA NA NA NA NANA NA NA NA NA NA NA NANA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1945 1945REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL REGIONAL JERRY SMITH JERRY SMITHSALES SALES SALES SALES SALES SALES SALES SALESOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE MIKE YAP MIKE YAP800/ROOF-411 800/ROOF-411 800/ROOF-411 800/ROOF-411 800/ROOF-411 800/ROOF-411 800/ROOF-411 800/ROOF-411499

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER /APOC APOC APOC APOC APOC APOC2. PRODUCT NAME APOC 104 APOC 107 APOC 109 APOC 128 APOC 122 APOC 124PLASTIC FIBRE WET/DRY FLASHING FLASHING WET/DRYCEMENT COLD-PLY CEMENT CEMENT CEMENT CEMENT3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar Cement X X X X X XAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBERED FIBERED FIBERED FIBERED FIBERED FIBEREDColor(s) AvailableSolids Content (% by volume) 80 70 80 80 80 80Weight Per Gallon (lbs.) 8.5 8.5 8.5 8.5 8.5 8.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 4-8 1/2 4 - 8 4-8 4-8 4-8Coverage (gals./square) 12 12 12 12 12USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X X X X XModified Bitumen <strong>Roofing</strong>Single-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XMetal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong> X X X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XMetal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong> X X X X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>Coal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL BRUSH, TROWEL TROWEL TROWEL TROWELROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTSXXXSPRAYSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1945 1945 1945 1945 1945 19459. FOR SALES INFORMATION CONTACT: JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH10. FOR TECHNICAL INFORMATION CONTACT: MIKE YAP MIKE YAP MIKE YAP MIKE YAP MIKE YAP MIKE YAP11. SEE APPENDIX IF CHECKEDNA=not applicable500

Roof Cements and Coatings Part 1: <strong>General</strong> InformationGARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GMX, INC. GMX, INC. GMX, INC.APOC APOC APOC APOC APOC APOC APOCAPOC 133 APOC 136 APOC 211 APOC 212 APOC 300 APOC 302 APOC 252 ULTRA-SHIELD ULTRA-SHIELD ULTRA-SHIELDMBA FLASHING MBA ALUMINUM ALUMINUM ASPHALT FIBERED ELASTOMERIC METAL BUILT-UP WHITE ROOFCEMENT ADHESIVE PAINT COATING EMULSION EMULSION WHITE RUSTPROOFING MASTIC COATINGX X X XXXXXCOATINGXFIBERED NON-FIBERED NON-FIBERED FIBERED NON-FIBERED FIBERED80 70 60 60 45 45 65 48 48 588.6 8.4 9 9.1 8.6 8.6 11.5 8.2 8.2 9.24-8 1/2 4-8 4-8 4-8 4-8 4-8 24–36 24–36 2–312 100 125 100 50-100 50-100 50-100 3–6 2–3 2X X X X X X X XX X X X X X XX X X X X X X XX X X X XX X X X X X X XX X X X XX X X XX X X X X XX X X XXXXX X X XX X XX X X X XX X XXXXXXXX X XX X X X X XTROWEL BRUSH, BRUSH, BRUSH, BRUSH BRUSH BRUSH BRUSH, ROLLER BRUSH, ROLLER BRUSH, ROLLERSPRAY SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY SPRAY SPRAYWITH POLYMATWITH POLYMATUSA USA USA USA USA USA USA USA USA USA1945 1945 1945 1945 1945 1945 1945 1989 1989 1989JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH JERRY SMITH T. CARNEY T. CARNEY T. CARNEY800/321–9336 800/321–9336 800/321–9336MIKE YAP MIKE YAP MIKE YAP MIKE YAP MIKE YAP MIKE YAP MIKE YAP T. CARNEY T. CARNEY T. CARNEY800/321–9336 800/321–9336 800/321–9336501

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME GMX, INC. GMX, INC. GRUNDY GRUNDY GRUNDY GRUNDYDIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME ULTRA-SHIELD ULTRA-SHIELD GRUNDY GRUNDY GRUNDY GURNDYNONFIBERED FIBERED PLASTIC CEMENT PLASTIC CEMENT PLASTIC CEMENT PLASTIC CEMENTALUMINUM ALUMINUM (AF) WET SURFACE WET SURFACE (AF)3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating X XAsphalt/Coal Tar Cement X X X XAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATEDColor(s) Available BLACK BLACK BLACK BLACKSolids Content (% by volume) 40 52 70 ± 2 78 ± 2 70 ± 2 78 ± 2Weight Per Gallon (lbs.) 7.8 8.4 9.5 9.5 9.5 9.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1–2 6 6 6 6Coverage (gals./square) 1 2 8 8 8 8USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong>Modified Bitumen <strong>Roofing</strong> X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X X XMetal <strong>Roofing</strong> X X X XOther <strong>Roofing</strong> X X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X X XMetal <strong>Roofing</strong> X X X XOther <strong>Roofing</strong> X X X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products X X X X4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, ROLLER BRUSH, ROLLER TROWEL TROWEL TROWEL TROWELROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTSSPRAYSPRAYSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1989 1989 1967 1967 1967 19679. FOR SALES INFORMATION CONTACT: T. CARNEY T. CARNEY J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT800/321–9336 800/321–9336 800/435–1210 800/435–1210 800/435–1210 800/435–121010. FOR TECHNICAL INFORMATION CONTACT: T. CARNEY T. CARNEY800/321–9336 800/321–933611. SEE APPENDIX IF CHECKEDNA=not applicable502

Roof Cements and Coatings Part 1: <strong>General</strong> InformationGRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.GRUNDY GRUNDY NO. 22 GRUNDY NO. 22 GRUNDY COLD GRUNDY COLD GRUNDY GRUNDY GRUNDY GRUNDY GRUNDYFLASHING FLASHING CEMENT ELASTOMERIC APPLICATION APPLICATION FIBRE ROOF FIBRE ROOF NONFIBRE ASPHALT ASPHALT BU 68CEMENT (AF) CEMENT (AF) CEMENT CEMENT (AF) COATING COATING (AF) ROOF COATING CONCRETE PRIMER RESATURANTX X X XXx x x XXFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATED FIBRATEDBLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK68 ± 2 76 ± 2 78 ± 2 67 ± 2 73 ± 2 72 ± 2 77 ± 2 68 ± 2 60 ± 2 68 ± 29.5 8.5 9.0 8.5 8.5 8.0 8.0 7.5 7.0 8.06 6 6 6 6 2 2 2 1 68 8 8 2 2 1.5 1.5 1 1 1.5-3.0X X XX X XX X XX X XX X XX X XX X XXXXX X XX X XX X XX X XX X X XX X XXX X XXXXXTROWEL TROWEL TROWEL BRUSH, BRUSH, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEEUSA USA USA USA USA USA USA USA USA USA1967 1990 1990 1967 1985 1967 1985 1967 1967 1967J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210503

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME GRUNDY GRUNDY GRUNDY GRUNDY GRUNDY GRUNDYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME GRUNDY GRUNDY FIBRE GRUNDY GRUNDY GRUNDY #200 GRUNDY #220ASPHALT 68 ROOF MASTIC PLYGRIP ALUMINUM FIBRE ALUMINUM NONFIBERED ALUM.RESATURANT (AF) TYPE II ADHESIVE COATING ROOF COATING ROOF COATING3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating XAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or Cement X X X X XElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available BLACK BLACK BLACK SILVER SILVER SILVERSolids Content (% by volume) 71 ± 2 54 ± 2 59 ± 2 65 ± 2 65 ± 2 64 ± 2Weight Per Gallon (lbs.) 8.0 8.0 8.0 9.4 9.2 9.0Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 6 6 2 2 2 2Coverage (gals./square) 1.5-3.0 1.5 1.5 1.5 1.5 1USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XModified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> XOther <strong>Roofing</strong> X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong> X XRoll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTSSQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEE SQUEEGEESee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1985 1985 1990 1988 1967 19679. FOR SALES INFORMATION CONTACT: J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT J. VAN PELT800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–1210 800/435–121010. FOR TECHNICAL INFORMATION CONTACT:11. SEE APPENDIX IF CHECKED X XNA=not applicable504

Roof Cements and Coatings Part 1: <strong>General</strong> InformationGRUNDY GRUNDY GRUNDY HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO.GRUNDY NO. 20 F GRUNDY NO. 20 NF GRUNDY NO. 120 #307 FIBRATED #403 SPRAY #504 #505 #508 #902 #903AF EMULSION EMULSOIN ALUMINUM ROOF ASPHALT GRADE COLD PLASTIC ROOF FLASHMASTER WET PATCH PERMANENT SOLID MBEMULSION EMULSION APPLIED CEMENT ROOF CEMENT ADHESIVE BOND ADHESIVEX X X XXX X X XXXXXFIBRATED NONFIBRATED NONFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATEDBLACK BLACK SILVER BLACK BLACK BLACK BLACK BLACK BLACK BLACK48 ± 2 48 ± 2 30 ± 2 50 70 70 72 62 65 809.0 9.0 9.0 9 8 10 9 9 9.1 10.52 2 2 8-24 8-24 6-18 8-243 NOM. 3 NOM. 1.5 4 1.5-2 1.5-2 1.5-2X X X XX X X XX X X XX X X XX X XX X XX X XX X XX X XXXXX X XXXX X XBRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, SPRAY TROWEL TROWEL TROWEL BRUSH, SPRAY, BRUSH, SPRAY,SQUEEGEE SQUEEGEE SQUEEGEE SPRAY SQUEEGEE SQUEEGEE SQUEEGEE3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLYCOLD APPLIED COLD APPLIED COLD APPLIED COLD APPLIEDROOF SYSTEM ROOF SYSTEM ROOF SYSTEM ROOF SYSTEMSBS MODIFIEDBITUMEN ROOFSYSTEMSBS MODIFIEDBITUMEN ROOFSYSTEMUSA USA USA USA USA USA USA USA USA USA1967 1967 1992 1945 1989 1985 1980 1982 1982 1998J. VAN PELT J. VAN PELT J. VAN PELT J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN800/435–1210 800/435–1210 800/435–1210 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182505

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #905 #100 #103 #104 #107 #109FLASHMASTER EMULSION ASPHALT ASPHALT ASPHALT LIQUID ROOFPRIMER PRIMER EMULSION3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt Primer X XAsphalt/Coalt Tar Coating X XAsphalt/Coal Tar CementXAsphalt Emulsion X X XModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) X NEOPRENE3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATEDColor(s) Available BLACK BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 75 50 40 40 50 60Weight Per Gallon (lbs.) 9 8.5 7 7 8.5 8.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 0.5-2 0.5-2 8-24 3-24Coverage (gals./square) 3.0 0.5 0.5 3.5 3.0USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XModified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong>Other <strong>Roofing</strong> X X4C. PRIMINGBuilt-Up <strong>Roofing</strong> X X XConcrete/Wood Decks X X XMetal X X X4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL BRUSH, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH,ROOF SYSTEM DESCRIPTION (or NA)SPRAY ROLLER ROLLER SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS 3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLYCOLD APPLIED COLD APPLIED COLD APPLIEDSYSTEM ROOF SYSTEM ROOF SYSTEMSee Built-Up <strong>Roofing</strong> Section If Checked X X X6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1982 1989 1997 1991 1940 19979. FOR SALES INFORMATION CONTACT: J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–766310. FOR TECHNICAL INFORMATION CONTACT: S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-518211. SEE APPENDIX IF CHECKEDNA=not applicable506

Roof Cements and Coatings Part 1: <strong>General</strong> InformationHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.#111 INSULBOND #120 #201 #203 #204 #208 WET PATCH #209 #220 ALUMITOP #229 #280 PREMIUMINSULATION ALUMINUM FIBERED COLD PLASTIC ROOFING ELASTOMERIC FIBRATED ALUMINUM WHITEADHESIVE ROOF PAINT ASPHALT COATING APPLIED ROOF CEMENT CEMENT SBS MOD MASTIC ALUMINUM EMULSION ELASTOMERICXX X XX X XXXNONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATEDBLACK SILVER BLACK BLACK BLACK BLACK BLACK SILVER SILVER WHITE/TAN/GRAY60 45 30 25 72 72 70 50 50 508.5 8.5 8.5 8 10 10 8 10 9 110.5-2 1.0 12.0 8-24 8.0 8.0 4.0 4.0 2.02-2.5 0.3 1.3 1.5-2 1.5-2 1.5 1.5X X X XX X X X XX X X XX X X XX X XX X XX X XX X XX X XX X XXXXXX X X X XX X X XX X X XXXX X XX X XBRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, TROWEL TROWEL TROWEL BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,SQUEEGEE ROLLER ROLL SQUEEGEE ROLL ROLL ROLL3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLY 3 OR 4 PLYCOLD APPLIED COLD APPLIED COLD APPLIED COLD APPLIED COLD APPLIED COLD APPLIEDROOF SYSTEM ROOF SYSTEM ROOF SYSTEM ROOF SYSTEM ROOF SYSTEM ROOF SYSTEMXXUSA USA USA USA USA USA USA USA USA USA1989 1950 1944 1975 1934 1934 1986 1965 1987 1983J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN J. HOLLERAN800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663 800/598–7663S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182507

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME HENRY CO. KARNAK KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP. CORP.2. PRODUCT NAME #287 SOLARFLEX #19 #19 AF #19 ULTRA #66 AF #71 AFWHITE ROOF FLASHING FLASHING RUBERIZED MODIFIED BITUMEN ROOF COATINGCOATING CEMENT CEMENT FLASHING CEMENT ADHESIVE3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingXAsphalt/Coal Tar Cement X XAsphalt EmulsionModified Bitumen Coating or CementXElastomeric Coating or Cement (specify type) X CEMENT3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBERED FIBERED FIBERED FIBERED FIBEREDColor(s) Available WHITE/TAN BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 42Weight Per Gallon (lbs.) 11 8.65Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1.0 24–48Coverage (gals./square) 2.0 8 8 8 1–2 4USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XModified Bitumen <strong>Roofing</strong> X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X XMetal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XMetal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> XOther <strong>Roofing</strong>X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong> XRoll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep Products X X X4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X XReroofing/Maintenance X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, TROWEL TROWEL TROWEL TROWEL, BRUSH,ROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS 3 OR 4 PLYSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSROLL BRUSH SPRAYCOLD APPLIEDROOF SYSTEMSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1988 1945 1982 1998 1989 19489. FOR SALES INFORMATION CONTACT: J. HOLLERAN SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT800/598–7663 800/526–4236 800/526–4236 800/526-4236 800/526–4236 800/526–423610. FOR TECHNICAL INFORMATION CONTACT: S. LEONARD TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT972/494-5182 800/526–4236 800/526–4236 800/526-4236 800/526–4236 800/526–423611. SEE APPENDIX IF CHECKEDNA=not applicable508

Roof Cements and Coatings Part 1: <strong>General</strong> InformationKARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.#78 AF #81 F # 97 # 97AF #100 AF # 107 AF #155 #155 AF #169AF NF #170 AFCOLD ADHESIVE MODIFIED BITUMEN FIBERED NONFIBERED NONFIBERATED VELVET AMPHIBOKOTE AMPHIBIKOTE ALUMINUM TAR CEMENTCEMENT ADHESIVE ALUMINUM ALUMINUM EMULSION ROOF COATING WET / DRY WET / DRYXXX X X XXX X X X XFIBERED FIBERED FIBERED FIBERED NONFIBERED NONFIBERED FIBERED FIBERED NONFIBRATED FIBEREDBLACK BLACK ALUMINUM ALUMINUM BLACK BLACK BLACK BLACK ALUMINUM BLACK58 668.65 8.5 9.5924–48 24 24 4–6 24 24-482–4 1–2 1–1.5 1–1.5 4–6 1–2 1–1.5 4X X X X X X X X XX X X X X X X XX X X X XX X X X XX X X X XX X X XXXXXXXX X XX X XXXX X X X X XX X X X XX X XXXXX X X XX X X XBRUSH, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, TROWEL, TROWEL TROWEL BRUSH, SPRAY, TROWELSPRAY TROWEL,SQUEEGEE ROLLER ROLLER SPRAY SPRAY ROLLERCOLD-PROCESS NA NA NA NASYSTEM + POLY-MAT + ALUMINUMNA NA NA NANA NA SURFACING NAUSA USA USA USA USA USA USA USA USA USA1977 1981 1948 1984 1954 1947 1952 1952 1947 1958SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236509

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME KARNAK KARNAK KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP. CORP. CORP.2. PRODUCT NAME #220 AF #229 AF AR #297 AF AQUA-LUM #298 AF ALUMIN - R #501 #505 AFFIBERED ELASTOMERIC EMULSION ELASTOMERIC ELASTO-BRITE ELASTO-BRITEEMULSION ALUMINUM ALUMINUM M3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingXAsphalt/Coal Tar CementAsphalt EmulsionXModified Bitumen Coating or CementXElastomeric Coating or Cement (specify type) CEMENT/COATING COATING COATING COATING3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBERED FIBERED FIBERED NONFIBERED NONFIBERED NONFIBEREDColor(s) Available BLACK BLACK ALUMINUM ALUMINUM VARIOUS VARIOUSSolids Content (% by volume) 65 50Weight Per Gallon (lbs.) 8.6 8.5 12.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 24-48 24–48 24-48 24–48 48Coverage (gals./square) 4 4–15 1–1.5 1.5–2.0 2 2USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X XModified Bitumen <strong>Roofing</strong> X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetalX4D. FLASHINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong> X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X X X XReroofing/Maintenance X X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, BRUSH, ROLLER BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)SPRAY TROWEL, SPRAY ROLLER ROLLER ROLLER ROLLER6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS COLD PROCESS NA NA NASYSTEMSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS COLD PROCESS COLD PROCESS ELASTOMERIC ARCHITECTURAL METAL ROOFINGSYSTEM SYSTSEM SYSTEM COATING MAINTENANCESYSTEM SYSTEM7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1954 1973 1982 1979 1978 19789. FOR SALES INFORMATION CONTACT: SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT SALES DEPT800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–423610. FOR TECHNICAL INFORMATION CONTACT: TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT TECH DEPT800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–4236 800/526–423611. SEE APPENDIX IF CHECKEDNA=not applicable510

Roof Cements and Coatings Part 1: <strong>General</strong> InformationKARNAK KARNAK KARNAK KEMPER KOKEM METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICSCORP. CORP. CORP. SYSTEMS PRODUCTSINC.INC.#108 #98 AF #502 KEMPEROL SUNGUARD-R ACRYLIC ARCYLIC ACRYLIC ACRYLIC ACRYLICASPHALT FIBERED RC-W PRIMER GEL BASE WHITE GRAYPRIMER ALUMINUM ELASTO-KOTEXXXX COATING ELAS. COATING ADHESIVE ACRYLIC MASTIC COATING COATINGNONFIBERED FIBERED NONFIBERED NONFIBRATED X NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATEDBLACK ALUMINUM VARIOUS VARIETY VARIOUS BLACK, CLEAR WHITE GRAY WHITE GRAY99 70 26 67 65 67 679.5 12 8.5 12 12 12 128 24 24 3 4-24 1–24 24 24–48 24–48 24–480.5-0.75 1-1.5 1-1.5 6.3 1 0.33–1.5 9 5–7 1–4 1–4X X X X X X X XX X X X X XX X X X X XX X X X X X XX X X X X X X X XX X X X XX X X X XX X X X XX X X X XX XXXXXX X X X XX X X X XX X X X XX X X X XX X X X X X XX X X X XX X X X X XX X X X X X XX X X X X XXXX X X X X X X XX X X X X X X XBRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY BRUSH, SPRAY BRUSH, TROWEL, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER RUBBER GLOVE ROLLER ROLLER ROLLERXXARCH COAT POLYESTER RESIN, PRIMER + BASE + PRIMER + BASE + PRIMER + BASE + PRIMER + BASE +SYSTEM / METAL POLYESTER WHITE + FABRIC WHITE + FABRIC WHITE + FABRIC GRAY + FABRICROOFING REINFORCEMENTUSA USA USA GERMANY USA USA USA USA USA USA1945 1998 1975 1960 1979 1972 1981 1981 1981 1981SALES DEPT SALES DEPT SALES DEPT SALES DEPT. R. KO M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN800/526–4236 800/526–4236 800/526–4236 800/541–5455 503/235–9206 408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–7733TECH DEPT TECH DEPT TECH DEPT TECH DEPT R. KO L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN800/526–4236 800/526–4236 800/526–4236 800/541–5455 503/235–9206 408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–7733511

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS2. PRODUCT NAME ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLICSTORM CLOUD BEIGE DESERT SAND BRICK RED CUSTOM PRIMERCOLORS3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerXAsphalt/Coalt Tar CoatingAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) COATING COATING COATING COATING COATING3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATEDColor(s) Available STORM CLOUD BEIGE DESERT SAND BRICK RED CUSTOM BLK, WHT, CLRSolids Content (% by volume) 67 67 67 67 67 25Weight Per Gallon (lbs.) 12 12 12 12 12 8.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 24–48 24–48 24–48 24–48 24–48 4Coverage (gals./square) 1–4 1–4 1–4 1–4 1–4 1USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X X XComposite <strong>Roofing</strong> X X X X X XModified Bitumen <strong>Roofing</strong> X X X X X XSingle-Ply <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong> X X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong> X X XMetal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> XComposite <strong>Roofing</strong> XMetal <strong>Roofing</strong> XOther <strong>Roofing</strong> X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X X X XCoal Tar Built-Up <strong>Roofing</strong> X X X X X XMetal <strong>Roofing</strong> X X X X X XOther <strong>Roofing</strong> X X X X X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X X X X XCold-Process Modified <strong>Roofing</strong>XRoll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X X X X X XReroofing/Maintenance X X X X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS PRIMER + BASE + PRIMER + BASE + PRIMER + BASE + PRIMER + BASE + PRIMER + BASE +STORMCLOUD + BEIGE + FABRIC DESERT SAND + BRICK RED + CUSTOM +FABRIC FABRIC FABRIC FABRIC7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1981 1981 1981 1981 1981 19749. FOR SALES INFORMATION CONTACT: M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–773310. FOR TECHNICAL INFORMATION CONTACT: L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–7733 408/280–773311. SEE APPENDIX IF CHECKEDNA=not applicable512

Roof Cements and Coatings Part 1: <strong>General</strong> InformationMETACRYLICS METACRYLICS METACRYLICS METACRYLICS MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.ACRYLIC ACRYLIC ACRYLIC ACRYLIC METALSHIELD METALSHIELD PREMIUM BLIND NAIL/COLD ELASTIC #227 PRO GRADEBASE WHITE COLORS GEL ELASTOMERIC ELASTOMERIC FIBERED METHOD CEMENT/ ROOF SEALER ASBESTOS FREEROOF COAT/GRAY ROOF COAT/WHITE ROOF COATING ROOF ADHESIVE FLASHING CEMENTXXXXCOATING COATING COATING MASTIC COATING COATINGNONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDGRAY WHITE ANY COLOR WHITE, GRAY GRAY WHITE BLACK BLACK BLACK BLACK65 67 67 66 44.7 44.7 62 66 63 7112.1 12.1 12.1 12.1 11.6 11.6 8.3 8.0 8.6 8.924 12 12 24 2.5 2.5 6 6 65 4 4 9 1.5 1.5 2.0 2.0 8 8X X X X X X XX X X X XX X X X X XX X X XX X X X X XX X X X X XX X X X X XX X X X X XX X X X X XX X XX X XX X XX X XX X X X XX X X XX X X X XX X X XXXXXXXX X X XX X X XBRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, TROWEL BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, TROWEL, TROWEL,ROLLER ROLLER ROLLER RUBBER GLOVE ROLLER ROLLER SPRAY SPRAY CAULK CAULKNA NA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NA NANA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1974 1974 1974 1974M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN M. ANTHENIEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN408/280–7733 408/280–7733 408/280–7733 408/280–7733 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268L. ANTHENIEN L. ANTHENIEN L. ANTHENIEN M. ANTHENIEN S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD408/280–7733 408/280–7733 408/280–7733 408/280-7733 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182513

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #226 PRO GRADE #300 PREMIUM ASBESTOS FREE #842 PRO GRAD #300 #832ASBESTOS FREE ALUMINUM ALUMINUM ASBESTOS FREE ASBESTOS FREE ALUMINUM ROOFFLASHING CEMENT ROOF COATING ROOF COATING ALUM ROOF COAT ALUM ROOF COAT PAINT UNFIBERED3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar Coating X X X X XAsphalt/Coal Tar CementXAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available BLACK ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMSolids Content (% by volume) 70 42 42 42 42 42Weight Per Gallon (lbs.) 10.6 8.2 8.2 8.2 8.2 8.2Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 6 2 2 2 2 1Coverage (gals./square) 8 1.0–1.3 1.0–1.3 1.0–1.3 1.0–1.3 0.5–1.0USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X X XComposite <strong>Roofing</strong> X X X X XModified Bitumen <strong>Roofing</strong> X X X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X X X XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL BRUSH BRUSH BRUSH BRUSH BRUSH, SPRAY.ROOF SYSTEM DESCRIPTION (or NA)CAULK SPRAY SPRAY SPRAY SPRAY ROLLER6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE9. FOR SALES INFORMATION CONTACT: W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-026810. FOR TECHNICAL INFORMATION CONTACT: S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-518211. SEE APPENDIX IF CHECKEDNA=not applicable514

Roof Cements and Coatings Part 1: <strong>General</strong> InformationMONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.#113 PRO GRADE #818 AQUA-BRIGHT ASPHALT FIBERED MBA GOLD SPRAY MASTIC LONG-LIFE #27 PRO GRADE LONG-LIFE MB GOLD #911 PRO GRADEASPHALT ASPHALT EMULSION EMULSION MOD BIT MEMB COATING PREMIUM FIBERED FLASHING ASBESTOS FREE ELASTOMERIC WET SEALPRIMER ALUM ROOF COAT ROOF COATING ADHESIVE ASBESTOS FREE ROOF COATING CEMENT ALL WEATHER CEM. FLASHING CEMENT ROOF REPAIRXXXXXXX X XXNONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDBLACK ALUMINUM BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK56 37 50 62 66 66 68 71 72 657.4 9.0 9.0 8.2 ±2 7.8 8.2 8.6 10.0 9.5 9.64 2 2 6 6 6 6 60.5–1.0 1.5 2 1.5 1.5–2.0 2.0 8.0 8.0 8.0 8.0X X X XX X X XXX X X XX X X XX X X XX X X XXXXX X X XX X X XX X X XX X X XX X X X X X X XXXXBRUSH, SPRAY. BRUSH, SPRAY. BRUSH, SPRAY. BRUSH, SPRAY, SPRAY, BRUSH TROWEL TROWEL TROWEL TROWELROLLER ROLLER ROLLER NOTCH SQUEEGEE SQUEEGEE SPRAY CAULK CAULK CAULK CAULKNA NA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USAW. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182515

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #225 PRO GRADE M.S. M.S. M.S. #230 PLUS #869 ELASTOMERICASBESTOS FREE SEAM SOLVENT BASED SOLVENT BASED ELASTOMERIC ALUMINUMALL WEATHER CEM SEALER PRIMER COATING FLASH CEMENT ROOF COATING3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar CementXAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) COATING COATING COATING CEMENT COATING3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED NONFIBERED NONFIBERED NONFIBERED FIBERED FIBEREDColor(s) Available BLACK WHITE WHITE WHITE BLACK ALUMINUMSolids Content (% by volume) 70.2 39.8 38.7 38.0 65.0-70.0 38.0-42.0Weight Per Gallon (lbs.) 8.8 9.4 9.8 9.4 9.0-9.4 8.6-9.0Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 6–8 2-4 2 2 8 2Coverage (gals./square) 8.0 0.5 0.5 3.0 8 1.5-2.0USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XModified Bitumen <strong>Roofing</strong>XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL BRUSH BRUSH, SPRAY, BRUSH, SPRAY, TROWEL, BRUSH,ROOF SYSTEM DESCRIPTION (or NA)CAULK ROLLER ROLLER CAULK SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE9. FOR SALES INFORMATION CONTACT: W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN W. MULLEN800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-0268 800/523-026810. FOR TECHNICAL INFORMATION CONTACT: S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD S. LEONARD972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-5182 972/494-518211. SEE APPENDIX IF CHECKEDNA=not applicable516

Roof Cements and Coatings Part 1: <strong>General</strong> InformationMONSEY MONSEY NATIONAL NATIONAL REPUBLIC REPUBLIC REPUBLIC REPUBLIC REPUBLIC REPUBLICDIVISION OF DIVISION OF COATINGS COATINGS POWDERED POWDERED POWDERED POWDERED POWDERED POWDEREDHENRY CO. HENRY CO. CORP. CORP. METALS, INC. METALS, NC. METALS, INC. METALS, INC. METALS, INC. METALS, INC.MOD. PLUS HIGH 00-32 ACRYSHIELD ACRYFLEX SOLARGARD SOLARGARD PERMAFLEX ALUMAMATION GEOGARD GEOGARDSOLIDS MOD ADHESIVE HY-BUILD 301 ALUMINUMBIT ADHESIVENONFIBEREDBLACK728.4 XXADHESIVE 0.5-2.0 COATING CEMENT ACRYLIC ACRYLIC URETHANE URETHANEFIBERED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED NONFIBRATEDBLACK WHT, SPECIAL WHITE, GRAY VARIOUS VARIOUS BLACK ALUMINUM GRAY ALUMINUM68.0-72-0 60 60 51 51 60 47 65 809.8-10.2 12.1 8.8 11.5 11.1 8.7 8.8 11.0 102–8 4–12 4–6 1 24 24 24 241.5 2–3 2–3 2–3 2–6 2–4 3–5 2–3X X X X X X X XXXX X X X X X XX X XX X X X X X XX X X XXXXXXXXXX X XXXXX X XXXXX X X X X XX X X X X X XSPRAY, BRUSH, SPRAY, SPRAY TROWEL, BRUSH, BRUSH, SPRAY, BRUSH, SPRAY BRUSH, SPRAY BRUSH, SPRAY BRUSH, SPRAY BRUSH, SPRAYSQUEEGEE SQUEEGEE ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER ROLL, SQUEEGEE ROLL, SQUEEGEENA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NANA NA CLEARSEAL POLY CLEARSEAL POLY NA NA NA NA NA NAFABRIC ACRY- FABRIC ACRY-SHIELD ACRYFLEX SHIELD ACRYFLEXUSA USA USA USA USA USA USA USA USA USA1981 1989 1975 1967 1984 1947 1983 1983W. MULLEN W. MULLEN M. CORDELL M. CORDELL J. MILLIKEN J. MILLIKEN J. MILLIKEN J. MILLIKEN J. MILLIKEN J. MILLIKEN800/523-0268 800/523-0268 805/388–7112 805/388–7112S. LEONARD S. LEONARD M. CORDELL M. CORDELL D. BATKE D. BATKE D. BATKE D. BATKE D. BATKE D. BATKE972/494-5182 972/494-5182 805/388–7112 805/388–7112 800/255–1136 800/255–1136 800/255–1136 800/255–1136 800/255–1136 800/255–1136517

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCOMPANY COMPANY COMPANY COMPANY COMPANY COMPANY2. PRODUCT NAME NO. 748 3 LB. ALUM NO. 779 ASPHALT NO. 301 NO. 714 NO. 315 NO. 351ROOF COATING AF PLAS ROOF CEM FIBRATED LIQUID FIBRATED LIQUID ASPHALT KWIK-SETFIBERATED WET SURFACE -AF ROOF COATING ROOF COATING AF ROOF PRIMER CEMENT3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerXAsphalt/Coalt Tar Coating X X XAsphalt/Coal Tar Cement X XAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED NONFIBRATED FIBRATEDColor(s) Available ALUMINUM BLACK BLACK BLACK BLACK BLACKSolids Content (% by volume) 62 57 67 36 63Weight Per Gallon (lbs.) 8.6 8.4 7.7 8.0 7.3 8.2Drying Time (hours, 50% R.H. at 70 0 F, touch dry)Coverage (gals./square) 1.5 8 3 3 0.75 3USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X XModified Bitumen <strong>Roofing</strong> X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong> X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong> X X X XOther <strong>Roofing</strong>X4C. PRIMINGBuilt-Up <strong>Roofing</strong>XConcrete/Wood DecksXMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> XOther <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>XCold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)XShingles, Tiles Other Steep ProductsX4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, TROWEL BRUSH BRUSH BRUSH BRUSHROOF SYSTEM DESCRIPTION (or NA)SPRAY CAULK SPRAY SPRAY SPRAY6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1990 1990 1912 1989 1959 19549. FOR SALES INFORMATION CONTACT: J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–430010. FOR TECHNICAL INFORMATION CONTACT: R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–054511. SEE APPENDIX IF CHECKEDNA=not applicable518

Roof Cements and Coatings Part 1: <strong>General</strong> InformationR.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCOMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANYNO. 753 NO. 751 NO. 758 2 LB. ALUM NO. 608 2 LB. ALUM NO. 718 3.8-LB. NO. 618 3.8-LB. NO. 371 NO. 771 NO. 379 ASPHALT NO. 071 TAR-BASEPOLYESTER KWIK-SET ROOF COATING ROOF COATING ALUM ROOF COAT ALUM ROOF COAT ASPHALT PLASTIC ASPHALT PLASTIC PLASTIC ROOF CEM PLASTIC ROOFMASTIC AF CEMENT AF AF (FIBRATED) (NONFIBRATED) AF (FIBRATED) (NONFIBRATED) ROOF CEMENT ROOF CEMENT AF WET SURFACE CEMENTX X X XX X X X X XFIBRATED FIBRATED FIBRATED NONFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATED FIBRATEDBLACK BLACK ALUMINUM ALUMINUM ALUMINUM ALUMINUM BLACK BLACK BLACK BLACK58 67 60 44 65 48 657.7 8.1 8.4 7.9 8.8 8.4 7.7 8.4 8.0 9.67 2–3 1.5 0.75 1.5 1 8 8 8 8X X X X X XX X X XX X X X XX X X XX X X X X XX X XX X X XX X XX X X X X XX X X XX X X X XX X XX X X X XX X X X XXXXXXBRUSH BRUSH BRUSH BRUSH BRUSH TROWEL TROWEL TROWEL TROWELSPRAY SPRAY SPRAY SPRAY SPRAYPOLYESTER NA NA NA NA NA NA NA NA NAFABRICNA NA NA NA NA NA NA NA NANA NA NA NA NA NA NA NA NAUSA USA USA USA USA USA USA USA USA USA1982 1990 1990 1954 1990 1975 1912 1989 1959 1956J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300 773/523–4300R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545 773/523–0545519

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCOMPANY COMPANY COMPANY COMPANY COMPANY COMPANY2. PRODUCT NAME NO. 079 TAR-BASE NO. 736 NO. 766 #737 LIQUID NEOPRENE #536PLASTIC ELASTOMERIC MB ELASTOMERIC MB MODIFIED CEMENT INSULATIONWET SURFACE ADHES BRUSH CEMENT TROWEL COATING ADHESIVE3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingAsphalt/Coal Tar CementXAsphalt EmulsionXModified Bitumen Coating or Cement X X X XElastomeric Coating or Cement (specify type)NEOPRENE3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available BLACK BLACK BLACK BLACK WHITE/BLACK BROWNSolids Content (% by volume) 65 60Weight Per Gallon (lbs.) 9.6 8.0 7.9 9 9.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 24–48 24–48 4-24 2Coverage (gals./square) 8 1–2 2–4 4-8 2USES4A. SURFACINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>Modified Bitumen <strong>Roofing</strong>XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X X XCold-Process Modified <strong>Roofing</strong> X X XRoll <strong>Roofing</strong> (Coated Sheets) X XShingles, Tiles Other Steep ProductsX4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL BRUSH TROWEL, BRUSH TROWEL, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NASPRAY CAULK SPRAY CAULK SQUEEGEESee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1956 1995 1995 1997 1995 19969. FOR SALES INFORMATION CONTACT: J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY J. BARRY773/523–4300 773/523–4300 773/523–4300 773/523-4300 773/523-4300 773/523-430010. FOR TECHNICAL INFORMATION CONTACT: R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY R. BARRY773/523–0545 773/523–0545 773/523–0545 773/523-0545 773/523-0545 773/523-054511. SEE APPENDIX IF CHECKEDNA=not applicable520

Roof Cements and Coatings Part 1: <strong>General</strong> InformationR.M. LUCAS R.M. LUCAS SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERNCOMPANY COMPANY PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUMCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.#310 #648 ALUM HEAVY DUTY HEAVY DUTY HEAVY DUTY H.D. GRAVEL H.D. GRAVEL FLEX-SHIELD FLEX-SHIELD ALUMINUMKWIK-DRY ROOF COATING ROOF COATING PRIMER PATCHING ROOF PRESERV. ROOF PRESERV. ROOF "EM" ROOF ROOFPRIMER NF - 3 LB COMPOUND (ASPHALT) (COAL TAR) COATING COATING COATINGXXX X X X XXXXNONFIBRATED NONFIBRATED FIBRATED NON-FIBRATED FIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATEDBLACK ALUMINUM BLACK BLACK BLACK BLACK BLACK BLACK BLACK SILVER-GREEN50 507.2 8.7 8.3 7.2 9.24 8.09 9.75 8.5 8.7 9.692-6 1–2 1–2 1–2 2–4 2–4 1–20.75 0.75 2.0–5.0 0.5–2.0 10 7 7 1.75–9.0 2.5–6.0 1.0–1.5X X X X XX X X XX X X X XX X X XX X X XXXXXXXXXXXXXXXX X X X X XXX X X X XX X X X XBRUSH, SPRAY, BRUSH, SPRAY BRUSH, SPRAY, BRUSH, SPRAY, TROWEL, BRUSH, BRUSH, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROLLER ROLLER ROLLER ROLLER CAULK SPRAY SPRAY ROLLER ROLLER ROLLERX X X X X XX X X X X XUSA USA USA USA USA USA USA USA USA USA1998 1996 1933 1933 1933 1980 1980 1970 1994 1933J. BARRY J. BARRY SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT.773/523-4300 773/523-4300 800/877-9372 800/877-9372 800/877-9372 800/877-9372 800/877-9372 800/877-9372 800/877-9372 800/877-9372R. BARRY R. BARRY TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH. DEPT.773/523-0545 773/523-0545521

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME SOUTHWESTERN SOUTHWESTERN SPM THERMO- SPM THERMO- TAMKO TAMKOPETROLEUM PETROLEUM SHIELD, INC SHEILD, INC. ROOFING ROOFINGCORP. CORP. PRODUCTS PRODUCTS2. PRODUCT NAME ADHESIVE ALUMINUM THERMO SHIELD THERMO SHIELD TAM-PRO TAM-PRO Q-15#9 ROOF ROOF ROOF FIBERED ELASTOMERICSHIELD COATING COATING EMULSION COAT FLASHING CEMENT3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingXAsphalt/Coal Tar Cement X XAsphalt EmulsionXModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) X ACRYLIC3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED NONFIBERED FIBRATED FIBRATEDColor(s) Available BLACK SILVER SEVERAL BLACK BLACKSolids Content (% by volume) 52 50 ±5 70Weight Per Gallon (lbs.) 8.4 8.6 10 8.5 9Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1–2 1–2 1 8–24 8Coverage (gals./square) 1.5–4.0 0.3–0.67 3 3 8USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X X XModified Bitumen <strong>Roofing</strong> X X X XSingle-Ply <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X X X XComposite <strong>Roofing</strong> X X XMetal <strong>Roofing</strong> X X XOther <strong>Roofing</strong> X X X4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksXMetalX4D. FLASHINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X XOther <strong>Roofing</strong> X X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X X X XCoal Tar Built-Up <strong>Roofing</strong> X XMetal <strong>Roofing</strong> X X X XOther <strong>Roofing</strong> X X X X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X XCold-Process Modified <strong>Roofing</strong> X XRoll <strong>Roofing</strong> (Coated Sheets) X XShingles, Tiles Other Steep Products X4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong> X XReroofing/Maintenance X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, ROLLER, BRUSH, SPRAY TROWELROOF SYSTEM DESCRIPTION (or NA)6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTSROLL, SQUEEGEE ROLLER ROLLER SPRAY ROLLERSee Built-Up <strong>Roofing</strong> Section If Checked X X6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTSSee Modified Bitumen <strong>Roofing</strong> Section If Checked X X6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS ACRYLIC UNDER- CAN BE USEDCOAT, POLYFORCE W/POLY REIN-CLOTH, TOPCOAT FORCING FABRIC7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1933 1933 1984 1984 1990 19909. FOR SALES INFORMATION CONTACT: SALES DEPT. SALES DEPT. SALES DEPT. SALES DEPT DISTRICT OFF. DISTRICT OFF.800/877-9372 800/877-9372 605/673-3201 800/538-295510. FOR TECHNICAL INFORMATION CONTACT: TECH. DEPT. TECH. DEPT. TECH. DEPT. TECH DEPT TECH SERVICE TECH SERVICE605/673-3201 800/538-2955 800/641–4691 800/641–469111. SEE APPENDIX IF CHECKEDNA=not applicable522

Roof Cements and Coatings Part 1: <strong>General</strong> InformationTAMKO TAMKO TAMKO TAMKO TAMKO TAMKO TAMKO TAMKO TAMKO TAMKOROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFING ROOFINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSTAM-PRO TAM-PRO TAM-PRO TAM-PRO WET/ TAM-PRO HEAVY- TAM-PRO TAM-PRO TAM-PRO FIRE TAM-PRO TAM-PROPLASTIC FIBERED COLD APPLIED DRY SURFACE BODY FLASHING FIBERED ALUM NONFIBER RATE (FR) FIBER CPA SBS CPS SBSROOF CEMENT ROOF COAT CEMENT PLAS ROOF CEM CEMENT ROOF COAT ALUM COATING ALUM ROOF COAT ADHESIVE FLASH CEMENTX X X XX X X XXXFIBRATED FIBRATED FIBRATED FIBRATED FIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED FIBRATEDBLACK BLACK BLACK BLACK BLACK SILVER SILVER SILVER BLACK BLACK80 ±5 50 60 ±5 80 ±5 75 ±5 40 40 42 58 ±2 68 ±29.5 84 8.4 9.5 9.0 8.4 7.6 8.6 8.5 9.08 8–12 12–24 8 8 2–4 2–4 2–4 1–4 88 1-4 2 8 8 1.5 1 1.5 1.5 8X X X XX X X XX X X XX X X XX X X X X XX X X X X XX X X XX X X X X XX X X X X X XX X X X X X XX X X X X XX X X X X X XXXXX X X X XX X X X XX X X X XX X X X XTROWEL BRUSH, SPRAY, BRUSH TROWEL, TROWEL BRUSH, BRUSH, SPRAY BRUSH, BRUSH, SPRAY TROWEL,ROLL, SQUEEGEE CAULK SPRAY ROLLER SPRAY SQUEEGEE CAULKUSA USA USA USA USA USA USA USA USA USA1990 1990 1990 1990 1990 1990 1990 1990 1990 1990DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF. DISTRICT OFF.TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE TECH SERVICE800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691 800/641–4691523

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME TAMKO TEXAS TEXAS TEXAS TEXAS TOPCOAT, INC.ROOFING REFINERY REFINERY REFINERY REFINERY SUBSIDIARY OFPRODUCTS CORP. CORP. CORP. CORP. GAF MATERIALS2. PRODUCT NAME TAM-PRO TEXOTROPIC QUICK-DRY MIGHTYPLATE MIGHTYPLATE TOPCOATASPHALT ANTIOXIDENE ROOF COATING II MEMBRANEPRIMER3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerXAsphalt/Coalt Tar Coating X X X XAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type)SYN. RUBBER3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATED NONFIBRATEDColor(s) Available BLACK ALUMINUM BLACK BLACK BLACK UNLIMITEDSolids Content (% by volume) 50 ±5 64 71.5 73.5 58Weight Per Gallon (lbs.) 7.6 8.16 7.15 7.83 8.33 12.5Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1–2 0.33 2Coverage (gals./square) 1 1.5–3.25USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong>Modified Bitumen <strong>Roofing</strong>XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong>Metal <strong>Roofing</strong>XOther <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong> X X XConcrete/Wood DecksXMetal X X4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong> X XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong> X X XOther <strong>Roofing</strong>X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong> X XCold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>XReroofing/MaintenanceX5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, SPRAY, BRUSH, SPRAY BRUSH, SPRAY, BRUSH, SPRAY, SPRAYROOF SYSTEM DESCRIPTION (or NA)ROLLER ROLLER ROLLER SQUEEGEE SQUEEGEE6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS MIGHTYPLY II NA MIGHTYPLY II MIGHTYPLY II NASee Built-Up <strong>Roofing</strong> Section If CheckedGLASS-BASE GLASS-BASE GLASS-BASEPOLY-MAT POLY-MAT POLY-MAT6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS MIGHTPLATE NA NA NA NASINGLE-PLYSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA MEMBRANECOMPONENT OFROOF SYSTEM7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1990 19799. FOR SALES INFORMATION CONTACT: DISTRICT OFF. J. MCGEE J. MCGEE J. MCGEE J. MCGEE J. GARDNER800/827–0711 800/827–0711 800/827–0711 800/827–0711 800/323–000910. FOR TECHNICAL INFORMATION CONTACT: TECH SERVICE TECH SERVCIE TECH SERVICE TECH SERVICE TECH SERVICE C. LEIBY800/641–4691 800/827–0711 800/827–0711 800/827–0711 800/827–0711 800/323–000911. SEE APPENDIX IF CHECKEDNA=not applicable524

Roof Cements and Coatings Part 1: <strong>General</strong> InformationTOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TREMCO, TREMCO, TREMCO, TREMCO,SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF INC. INC. INC. INC.GAF MATERIALS GAF MATERIALS GAF MATERIALS GAF MATERIALS GAF MATERIALS GAF MATERIALSFLASHING MP-300 MB PRIMING FLEXSEAL SB-90 SKYLITE ELS POLYROOF TREMFIX FIBERMATGRADE SYSTEM FLASHINGGRADEXXX X XXSYN. RUBBER SYN RUBBER SYN. RUBBER SYN RUBBER CEMENTNONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED NONFIBRATED FIBRATED FIBRATEDLT. GRAY, WHITE LT. BLUE WHITE WHITE WHITE CLEAR BLACK BLACK BLACK BLACK56 42 51 76 78 4012 10 11.5 10 10.5 7.5 9.3 8.1 9.1 10.12 1 1 1 1 0.51 2 5 2 8 8 8 8XX X X XX X X XX X XXX X X XX X XXXXBRUSH, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, BRUSH, CAULK, BRUSH, TROWEL TROWEL TROWEL TROWELCAULK ROLLER ROLLER TROWEL TROWEL ROLLERNA NA NA NA NA NA BUR MESH BUR MESH BUR MESH BUR MESHNA NA NA NA NA NA BUR MESH BUR MESH BUR MESH BUR MESHFLASHING RUST INHIBITOR ASPHALT PATCH INTERNAL GUTTER SOLVENT BASE FIBERGLASS NA NA NA NACOMPONENT OF COMPONENT OF SEALANT COMP. LINER COMP. FLASHING SKYLIGHTROOF SYSTEM ROOF SYSTEM ROOF SYSTEM ROOF SYSTEM COMPONENT SEALERUSA USA USA USA USA USA USA CANADA CANADA USA1979 1980 1983 1993 1984 1989J. GARDNER J. GARDNER J. GARDNER J. GARDNER J. GARDNER J. GARDNER SALES SALES SALES SALES800/323–0009 800/323–0009 800/323–0009 800/323–0009 800/323–0009 800/323–0009 OFFICE OFFICE OFFICE OFFICEC. LEIBY C. LEIBY C. LEIBY C. LEIBY C. LEIBY C. LEIBY TECHNICAL TECHNICAL TECHNICAL TECHNICAL800/323–0009 800/323–0009 800/323–0009 800/323–0009 800/323–0009 800/323–0009 DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT525

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO,INC. INC. INC. INC. INC. INC.2. PRODUCT NAME SHEETING SHEETING TREMPRIME DOUBLE DUTY POLARCOTE TREMLASTICBOND BOND W.B. ALUMINUML.V.3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerXAsphalt/Coalt Tar CoatingXAsphalt/Coal Tar CementAsphalt EmulsionXModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) CEMENT CEMENT ACRYLIC3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATEDColor(s) Available BLACK WHITE BLACK ALUMINUM WHITE BLACKSolids Content (% by volume)Weight Per Gallon (lbs.) 8.7 8.7 8.8 9.1 8.4Drying Time (hours, 50% R.H. at 70 0 F, touch dry)Coverage (gals./square) 4 4 0.5 0.5 4USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X X XComposite <strong>Roofing</strong>Modified Bitumen <strong>Roofing</strong> X X XSingle-Ply <strong>Roofing</strong>Other <strong>Roofing</strong>4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>Concrete/Wood DecksMetal4D. FLASHINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong> X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>Coal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>Other <strong>Roofing</strong>4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>Reroofing/Maintenance5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) TROWEL TROWEL BRUSH, SPRAY, ROLLER, BRUSH ROLLER,ROOF SYSTEM DESCRIPTION (or NA)XROLLER BRUSH SPRAY BRUSH6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NA POLYESTERXXXMAT CPSee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NA POLYESTERMAT CPSee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA NA NA NA NA7. COUNTRY OF MANUFACTURE CANADA CANADA CANADA USA USA USA8. YEAR OF FIRST COMMERCIAL USE9. FOR SALES INFORMATION CONTACT: SALES SALES SALES SALES SALES SALESOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE10. FOR TECHNICAL INFORMATION CONTACT: TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL11. SEE APPENDIX IF CHECKEDNA=not applicableDEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT526

Roof Cements and Coatings Part 1: <strong>General</strong> InformationTREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, UNIFLEX UNIFLEXINC. INC. INC. INC. INC. INC. INC. INC.ECOLASTIC TREMLAR TREMAR TREMLITE TREMLITE TREMLITE POLARCOTE TREMLASTIC S UNIFLEX 500 LO-VOCLRM-H LRM-V METAL PRIMER MASTIC COATING FR ALUMINUM ALUMINUMWB (10 YEAR) (10 YEAR0XXXXXACRYLIC ACRYLIC ACRYLIC ACRYLICXFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED NONFIBRATED FIBRATED FIBRATEDBLACK BLACK BLACK GRAY WHITE WHITE WHITE BLACK67 50 42 ± 2 61 ± 28.6 8.8 9.1 9.9 10.3 11.7 12.2 8.4 8.75 9.64–6 4–67 4 4 0.2 6 0.75 1/COAT 4 2.0–2.5 2.0–3.0X X X XXXX X X XX X XXXXXX X XXX X XXXXXXXXROLLER, SQUEEGEE TROWEL BRUSH, SPRAY, TROWEL BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,BRUSH, SPRAY ROLLER ROLLER ROLLER ROLLER ROLLER ROLLERNA NA NA NA NA NA NA POLYESTER NA NAMAT CPNA NA NA NA NA NA NA POLYESTER NA NAMAT CPNA NA NA NA NA NA NA NAUSA CANADA CANADA USA USA USA CANADA USA USA USA1946 1984SALES SALES SALES SALES SALES SALES SALES SALES SALES SALESOFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE 800/321–0572 800/321–0572TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL TECHNICAL D. DESTRO D. DESTRODEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT DEPARTMENT527

Roof Cements and Coatings Part 1: <strong>General</strong> Information1. COMPANY NAME UNIFLEX UNIFLEX UNIROOF UNITED UNITED UNITEDCORPORATION COATING COATINGS COATINGS2. PRODUCT NAME SUPERBRITE WATERBASED FORMFLEX ROOFMATE UNISEAL ACRYLEXALUMINUM METAL 6,000 300PAINT PRIMER3.1 PRODUCT DESCRIPTION, GENERAL CATEGORYAsphalt PrimerAsphalt/Coalt Tar CoatingXAsphalt/Coal Tar CementAsphalt EmulsionModified Bitumen Coating or CementElastomeric Coating or Cement (specify type) ACRYLIC ACRYLIC EPOXY ACRYLIC3.2 PRODUCT DESCRIPTION, GENERAL FEATURESFibrated/Nonfibrated NONFIBRATED NONFIBRATEDColor(s) AvailableMANYSolids Content (% by volume) 34 ± 2 39 60 20 38Weight Per Gallon (lbs.) 7.6 10.1 11.8 8.4 10.2Drying Time (hours, 50% R.H. at 70 0 F, touch dry) 1 1–2 4 2 0.50 0.50Coverage (gals./square) 2.5 2.5 1.5 2–4 0.33 0.40USES4A. SURFACINGBuilt-Up <strong>Roofing</strong> X XComposite <strong>Roofing</strong> X XModified Bitumen <strong>Roofing</strong> X XSingle-Ply <strong>Roofing</strong>XOther <strong>Roofing</strong> X X X4B. PATCHING/REPAIRINGBuilt-Up <strong>Roofing</strong>Composite <strong>Roofing</strong>Metal <strong>Roofing</strong>XOther <strong>Roofing</strong>4C. PRIMINGBuilt-Up <strong>Roofing</strong>XConcrete/Wood DecksXMetal X X X4D. FLASHINGBuilt-Up <strong>Roofing</strong>XComposite <strong>Roofing</strong>XMetal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4E. RESATURATION/RESURFACINGAsphalt Built-Up <strong>Roofing</strong>XCoal Tar Built-Up <strong>Roofing</strong>Metal <strong>Roofing</strong>XOther <strong>Roofing</strong>X4F. COLD-PROCESS ADHESIVE/LAP CEMENTCold-Process Built-Up <strong>Roofing</strong>Cold-Process Modified <strong>Roofing</strong>Roll <strong>Roofing</strong> (Coated Sheets)Shingles, Tiles Other Steep Products4G. LIQUID-APPLIED MEMBRANENew <strong>Roofing</strong>XReroofing/Maintenance X X X5. APPLICATION METHOD(S)(Brush, Caulk, Roller, Spray, Squeegee, Trowel) BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROOF SYSTEM DESCRIPTION (or NA)ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER6A. ASPHALT BUILT-UP ROOF MEMBRANE COMPONENTS NA NA NA NA NASee Built-Up <strong>Roofing</strong> Section If Checked6B. MODIFIED BITUMEN ROOF MEMBRANE COMPONENTS NA NA NA NA NASee Modified Bitumen <strong>Roofing</strong> Section If Checked6C. LIQUID-APPLIED MEMBRANE ROOF COMPONENTS NA NA ROOF MATE BASE NA NACOAT, TOP COAT& POLY FABRIC7. COUNTRY OF MANUFACTURE USA USA USA USA USA USA8. YEAR OF FIRST COMMERCIAL USE 1984 1984 1985 1973 1993 19939. FOR SALES INFORMATION CONTACT: SALES SALES D. KONSTAN B. MANN B. MANN B. MANN800/321–0572 800/321–0572 407/869–5110 800/541–4383 800/541–4383 800/541–438310. FOR TECHNICAL INFORMATION CONTACT: D. DESTRO D. DESTRO D. KONSTAN B. MANN B. MANN B. MANN407/869–5110 800/541–4383 800/541–4383 800/541–438311. SEE APPENDIX IF CHECKEDNA=not applicable528

Roof Cements and Coatings Part 1: <strong>General</strong> InformationUNITED UNITED UNITED UNITED UNITED UNITED UNITED UNITEDCOATINGS COATINGS COATINGS COATINGS COATINGS COATINGS COATINGS COATINGSROOF SHIELD BERM 500 BERM 600 / ELASTRON UNI-TILE ALUMISEAL ADHERE-IT UNIBASE60 UNITED 600 858 SEALER PRIMER EPDM PRIMER PRIMERXACRYLIC ACRYLIC BUTYL EPOXY URETHANE URETHANE ACRYLICTANTRANS. GREEN60 60 55 60 15 55 5511.5 12 11.5 8.6–9.2 8.92 4 2 4–6 30 MIN. 1–2 1 12–3 3–5 1.5–2 3 0.25–0.5 0.33 0.33–0.5 0.5–1XXXX X XX X XX X X XXX X XX X XXXXXXXX X XXXXX X X X XX X X X X XXXXBRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY, BRUSH, SPRAY,ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER ROLLER ROLLERNA NA NA NA NA NA NA NANA NA NA NA NA NA NA NAROOF MATE BASE BERM 500, BERM 500, ELASTRON UNI-TILE ALUMISEAL ADHERE-IT UNIBASECOAT, TOP COAT BERTM 600 & BERM 600 & 858 SEALER& POLY FABRIC POLY FABRIC POLY FABRICUSA USA USA USA USA USA USA USA1988 1990 1990 1965 1970 1995 1996B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN B. MANN800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383 800/541–4383529

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME ACRYMAX ACRYMAX ACRYMAX ALCO-NVC,TECHNOLOGIES TECHNOLOGIES TECHNOLOGIES INC.INC. INC. INC.2. PRODUCT NAME ACRYMAX ACRYMAX ACRYMAX #216 AFAF-130 AF-130 FR ACM 9000 FLASHING3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO YES NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)TYPE III4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDCEMENTTYPE I1. COMPANY NAME ALCO-NVC, ALCO-NVC, ALCO-NVC, ALCO-NVC,INC. INC. INC. INC.2. PRODUCT NAME #269T AF SBS #269 AF SBS#214 AF #215 AFTROWEL PLUS ALUMABARD NON ALUMAGARDGRADE ADHESIVE FIBRATED COAT FIBRATED COAT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A CLASS A, B CLASS A, BFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE I TYPE III4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED530

Roof Cements and Coatings Part 2: Technical DataALCO-NVC, ALCO-NVC, ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMINC. INC. COATING COATING COATING COATING COATING COATING COATING COATINGMFRS MFRS MFRS MFRS MFRS MFRS MFRS MFRS#207 #270 AF FIBRATED FIBRATED LIQUID RUBBERIZED RUBBERIZED ROOF NO FIBER ASPHALT COLDASPHALT ROOF CAP LIQUID ROOF COATING DAMP SURFACE DAMP SURFACE EMULSION ROOF PRIMER PROCESSROOF PRIMER MASTIC ROOF COATING ASESTOS FREE ROOF COATING ROOF COAT AF FIBERED EMULSION ADHESIVECLASS AYESYESTYPE I TYPE IV TYPE IITYPE ITYPE II TYPE I TYPE ITYPE IIALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUMCOATING COATING COATING COATING COATING COATING COATING COATING COATING COATINGMFRS MFRS MFRS MFRS MFRS MFRS MFRS MFRS MFRS MFRSPLASTIC PLASTIC WET / DRYWET / DRY FLASHTITE FLASHTITE, GLAS-MASTICNEOPRENE RUBBERIZED2.0#CEMENT CEMENT CEMENT CEMENT, ASBESTOS FREE RUBBER CEMENT ALUMINUMASBESTOS FREE ASBESTOS FREE ROOF CEMENT FIBEREDTYPE I, CLASS II TYPE I, CLASS II TYPE I, CLASS II TYPEII, CLASS IITYPE I TYPE I TYPE I TYPE I TYPE ITYPE III531

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME ALUMINUM ALUMINUM AMERICAN AMERICANCOATING COATING TAR TARMFRS MFRS COMPANY COMPANY2. PRODUCT NAME 3.0# 2.0# # 1818 # 1825ALUMINUM ALUMINUM ATCOCOAT ATCOLAPFIBERED NO FIBER3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B CLASS A, BFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A, B CLASS A, BFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)TYPE II4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE III TYPE II4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; orTYPE III4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME AMERICAN AMERICAN AMERICAN AMERICANTAR TAR TAR TARCOMPANY COMPANY COMPANY COMPANY2. PRODUCT NAME # 1826 # 1840 # 1850 # 1857RAINSTOP ATCOGARD ATCOGARD 2 ATCOSCREEN3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B CLASS A, B CLASS A, BFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A, B CLASS A, B CLASS A, BFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO NO NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)TYPE III TYPE IV4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE III4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED532

Roof Cements and Coatings Part 2: Technical DataAMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICAN AMERICANTAR TAR TAR TAR TAR TAR TAR TAR TAR TARCOMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY COMPANY#1858 # 1859 # 1866 PREMIUM # 1868 PREMIUM # 1823 #1897 #1898 #1326 # 1821 # 1822LIQUID ATCOSHIELD FIBERED ALUMINUM ATCOMASTIC FLAMEBLOC FLAMEBLOC ATCOSTOP RAINSEAL ROOF PATCHSUN SHIELDALUMINUMCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BNO NO NO NO NO NO NO NOYESTYPE I TYPE III TYPE III TYPE I TYPE III TYPE ITYPE I TYPE I TYPE IIYESYESAMERICAN AMERICAN AMERICAN AMERICAN ANDEK ANDEK ANDEK CELOTEX CELOTEX CELOTEXTAR TAR TAR TAR CORP. CORP. CORP. CORP. CORP. CORP.COMPANY COMPANY COMPANY COMPANY# 1860 # 1864 # 4200 #5000ANDEKANDEK ANDEK ELASTIGUM NOAH'S PITCH S.I.S.ALUMINUM ATCOSHIIELD 2 ATCOWHITE ATCOBRITE RUBBERCOAT SILVER FILM RUBBERCOAT ROOFERS PLASTIC ADHESIVEASPHALT COAT 1047 BASE CEMENT COMPOUNDCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, B, C CLASS A, B, C CLASS A, B, CCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, B, C CLASS A, B, C CLASS A, B, CNO NO NO NO YES YES YESYESTYPE I TYPE III TYPE ITYPE I, IITYPE IIIYESYES533

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME CELOTEX CELOTEX CELOTEX CELOTEXCORP. CORP. CORP. CORP.2. PRODUCT NAME SBS MOD BIT ALUMINUM ALUMINUM ELASTIGUMFLASHING ROOF COATING ROOF COATING ROOF COATINGCEMENT (FIBRATED) (NONFIBRATED)3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B, C CLASS A, B, C CLASS A, B, CFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A, B, C CLASS A, B, C CLASS A, B, CFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) YES YES YESCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)TYPE I, II4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE III TYPE I4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; orTYPE III4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME CELOTEX CELOTEX CELOTEX CELOTEXCORP. CORP. CORP. CORP.2. PRODUCT NAME AWP SBS MODIFIED ASPHALT FLAT TOPALL WEATHER BITUMEN PRIMER EMULSIONPLASTIC CEMENT ADHESIVE3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B, C CLASS A, B, C CLASS A, B, C CLASS A, B, CFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A, B, C CLASS A, B, C CLASS A, B, C CLASS A, B, CFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) YES YES YES YESCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)TYPE IV4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I, II4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; orTYPE III4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED534

Roof Cements and Coatings Part 2: Technical DataCONKLIN CONKLIN DEWITT DEWITT DEWITT DEWITT DEWITT DEWITT DEWITT DEWITTCO., INC. CO., INC. PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTSCO. CO. CO. CO. CO. CO. CO. CO.RAPID ROOF BENCHMARK PRO FLASH PRO WET / STICK PRO SBS PRO ROOFLOX 300 PRO BRITE 200 PRO COAT PRO PRIMER PROIII FLASHING FLASH. CEMENT FLASHING ALUMINUM FIBRE ALUMINUM FIBRE FIBER ROOF ASPHALT RESATURANTCEMENT WET / DRY CEMENT COATING COATING COATING ASPHALTCLASS ACLASS AYESYESTYPE ITYPE ITYPE IIITYPE IIITYPE ITYPE ITYPE II, IIIYESDEWITT DEWITT DEWITT DEWITT DEWITT DEWITT ECOLOGY ECOLOGY ECOLOGY ECOLOGYPRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS ROOF ROOF ROOF ROOFCO. CO. CO. CO. CO. CO. SYSTEMS SYSTEMS SYSTEMS SYSTEMSPRO ASPHALT PRO ASPHALT PRO PRO PRO SILVER PRO SILVERERS 309 ERS 100 ERS 200 ERS 305EMULSION EMULSION LAP CEMENT SBS ADHESIVE SHIELD 300 ALUM SHIELD ALUM(FIBRE) (NO FIBRE) COAT NO FIBRE COAT NO FIBRECLASS A, B, CCLASS A, B, CCLASS A, B, CTYPE III TYPE IV TYPE II TYPE IITYPE ITYPE ITYPE IIITYPE II, III TYPE II, III TYPE III535

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME ECOLOGY ECOLOGY ECOLOGY ECOLOGYROOF ROOF ROOF ROOFSYSTEMS SYSTEMS SYSTEMS SYSTEMS2. PRODUCT NAME ERS 307A ERS 307T ERS 308 ERS 3153. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDTYPE ITYPE ITYPE IIITYPE I1. COMPANY NAME ECOLOGY ECOLOGY ECOLOGY ECOLOGYROOF ROOF ROOF ROOFSYSTEMS SYSTEMS CEMENT CEMENT2. PRODUCT NAME ERS 306 ERR 302 ERS 301 ERS 300A3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDTYPE ICLASS A, B, CCLASS A, B, CCLASS A, B, CTYPE IIIYESTYPE I536

Roof Cements and Coatings Part 2: Technical DataECOLOGY ECOLOGY ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMSROOFROOFCEMENT CEMENTERS 300T ERS 304 ERATHANE 300 ERAKOTE ERATHANE 300 T ERAGUARD ERAGUARD ERAGUARD ERAGUARD ERAGUARDBASE COAT 2000 1000 1100 1001 4000CLASS ACLASS A CLASS A CLASS A CLASS A CLASS ANO YES YES NO NO YESTYPE ITYPE IYESERSYSTEMS ERSYSTEMS ERSYSTEMS ERSYSTEMS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLCPRIMER / ERAGUARD 500ERAGUARDHER 202 FG F 100 M 100 F 150 F 110 F 440 F540, 500SURFACER 6000 POWRCOAT RUBRCOAT POWRSEAL POWRLAP POWRPRIM ALUMINUMCOATINGCLASS A CLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BCLASS A CLASS A CLASS A CLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BNO YES YES NO NO NO NO NO NOYESTYPE II TYPE I TYPE IITYPE ITYPE III537

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC2. PRODUCT NAME F670 M860 M850 F700MOBL SHIELD POLRBRITE POLRSHIELD POWRGARD3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B CLASS A, B CLASS A, B CLASS A, BFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A, B CLASS A, B CLASS A, B CLASS A, BFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO NO NO NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)TYPE III4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE III4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC2. PRODUCT NAME F880 F200 C250 F300SUNGUARD POWERBOND FOOF FLASH POWERMASTIC3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDCLASS A, BCLASS A, BNOTYPE IIITYPE IITYPE II, CLASS ITYPE IYES538

Roof Cements and Coatings Part 2: Technical DataFIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDSCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLCM300 C240 M620 C100 M150 M200 F630, F640, F650 F 600 M 700 POWRGARD 2RUBBER TILEBOND SILVER ROOF COAT RUBRSEAL RUBROND FIBERED ALUM FLAMEBLOC RUBRGARDMASTIC MASTIC COATINGCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BCLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, B CLASS A, BNO NO NO NO NO NOTYPE IIITYPE IVTYPE IITYPE ITYPE IIITYPE IIITYPE II, CLASS ITYPE ITYPE IYESFIELDS FIELDS FIELDS FIELDS FIELDS FIELDS FIELDS GAF GAF GAFCO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC CO., LLC MATERIALS MATERIALS MATERIALSCORP. CORP. CORP.M 800 C 300 C 200 M 400 F 460 M 600 M 630 GAF PREMIUM GAF ALUMINUM GAF ASPHALTRUBRSTAR ROOF ROOFBOND RUBRPRIME WATERSTOP SILVRBLOC SILVRSHEILD 3 FIBERED ALUM ROOF PAINT CONCRETEMASTIC ROOF COATING PRIMERCLASS A, B CLASS A, B CLASS A, B CLASS ACLASS A, B CLASS A, B CLASS A, BNO NO NO NO NOYES YES YESTYPE IIITYPE III TYPE III TYPE III TYPE ITYPE I, CLASS IITYPE II, CLASS IYES539

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME GAF GAF GAF GAFMATERIALS MATERIALS MATERIALS MATERIALSCORP. CORP. CORP. CORP.2. PRODUCT NAME GAF RUBEROID RUBEROID MB GAF JETBLACK3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDWEATHERCOAT MOD BIT FLASHING PREMIUMEMULSION ADHESIVE CEMENT FLASHING CEMCLASS ATYPE IVTYPE IIITYPE IYESTYPE IYES1. COMPANY NAME GAF GARDNER / GARDNER / GARDNER /MATERIALS APOC APOC APOCCORP.2. PRODUCT NAME GAF APOC 101 APOC 103 APOC 104ALUMINUM PLASTIC ASPHALT PLASTICEMULSION CEMENT CEMENT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)TYPE I, CLASS II4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response) YES4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED540

Roof Cements and Coatings Part 2: Technical DataGARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER / GARDNER /APOC APOC APOC APOC APOC APOC APOC APOC APOC APOCAPOC 107 APOC109 APOC 122 APOC 124 APOC 128 APOC 133 APOC 136 APOC 211 APOC 212 APOC 300FIBREX WET / DRY FLASHING WET - R - DRY FLASHING MBA FLASHING MBA ADHESIVE ALUMINUM ALUMINUM ASPHALTCOLD-PLY CEMENT CEMENT CEMENT CEMENT PAINT COATING EMULSIONCLASS A, B, C CLASS A, B, C CLASS A, B, C CLASS ATYPE IIITYPE ITYPE IIITYPE I, CLASS IITYPE I, CLASS ITYPE I TYPE I TYPE ITYPE IIITYPE IIIYESYESGARDNER / GARDNER / GMX, GMX, GMX, GMX, GMX, GRUNDY DIV. GRUNDY DIV. GRUNDY DIV.APOC APOC INC. INC. INC. INC. INC. OF HENRY CO. OF HENRY CO. OF HENRY CO.APOC 302 APOC 252 ULTRA-SHIELD ULTRA-SHIELDULTRA-SHIELD ULTRA-SHIELDULTRA-SHIELDGRUNDY GRUNDY GRUNDYFIBERED WHITE BUILT-UP WHITE ROOF FIBERED NONFIBERED METAL PLASTIC ROOF CEMENT PLASTIC CEMEMULSION ELASTOMERIC MASTIC COATING ALUMINUM ALUMINUM RUSTPROOFING CEMENT (AF) WET SURFACECLASS ACLASS ATYPE II TYPE II TYPE IITYP E IITYP E IITYPE II TYPE I TYPE ITYPE I, CLASS ITYPE I, CLASS ITYPE IYES541

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV.OF HENRY CO. OF HENRY CO. OF HENRY CO. OF HENRY CO.2. PRODUCT NAME GRUNDY GRUNDY GRUNDY GRUNDYCOLD APPLIED COLD APPLIED FIBRE ROOF FIBRE ROOFCEMENT CEMENT (AF) COATING COATING (AF)3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response) TYPE I TYPE I4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)TYPE ITYPE I4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV.HENRY CO. HENRY CO. OF HENRY CO. OF HENRY CO.2. PRODUCT NAME GRUNDY 1MB-AF GRUNDY #200GRUNDY ASPHALT GRUNDYALUMINUM FIBRE ALUMINUM CONCRETE ASPHALT BU 68COATING ROOF COATING PRIMER RESATURANT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)CLASS BFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response) TYPE I4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE III TYPE III4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED X542

Roof Cements and Coatings Part 2: Technical DataGRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV. GRUNDY DIV.OF HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. OF HENRY CO. HENRY CO. HENRY CO. HENRY CO.GRUNDY GRUNDY PLASTIC GRUNDY GRUNDY NO. 22 GRUNDY NO. 22 GRUNDY GRUNDY GRUNDY #220 GRUNDY NO. 20 GRUNDY NO. 20NONFIBRE ROOF CEMENT WET FLASHING FLASHING ELASTOMERIC PLYGRIP FIBRE ROOF NONFIBERED AF NFCOATING SURFACE (AF) CEMENT CEMENT (AF) CEMENT (AF) MB ADHESIVE MASTIC II ALUM ROOFCOATEMULSIONEMULSIONCLASS A CLASS A CLASS ATYPE IVTYPE IITYPE IIITYPE ITYPE I, CLASS ITYPE I TYPE I TYPE ITYPE I,GRADE 2YES YES YESXXGRUNDY DIV. GRUNDY DIV. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY COOF HENRY CO. HENRY CO.GRUNDYGRUNDY NO. 120#100 #103 PRIMER #107 #280 PREMIUM #287 #307 FIBRATED#109 #111ASPHALT BU 68 ALUMINUM ROOF ELASTO- ASPHALT WHITE SOLAR- ASPHALT LIQUID INSULBONDRESATURANT AF EMULSION EMULSION EMULSION ELASTOMERIC FLEX EMULSION ROOFCLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS AYESTYPE IIITYPE IVTYPE I543

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #120 #201 FIBERED #203 #204PREMIUM ASPHALT COLD-AP PLASTIC3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDALUMINUM COATING ROOF CEMENTTYPE ITYPE ICLASS ATYPE IIITYPE I, CLASS I1. COMPANY NAME HENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #104#208 #209 #220 FIBEREDASPHALT WET ELASTOMERIC ALUMINUMPRIMER PATCH COATING3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE II4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)TYPE I, CLASS I4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED544

Roof Cements and Coatings Part 2: Technical DataHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. KARNAK KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP. CORP.#229 #403 #520 FIBERED #902 #903 # 19 # 19AF #19 ULTRA #66AF # 71AFALUMINUM SPRAY GRADE ALUMINUM PERMANENT HI-SOLIDS FLASHING FLASHING FLASHING MOD BIT ROOFEMULSION COLD AP COATING BOND ADHES MB ADHESIVE CEMENT CEMENT CEMENT ADHESIVE COATINGCLASS A CLASS CLASS A CLASS A CLASS A CLASS ACLASS AYESYESTYPE ITYPE IIITYPE I, CLASS ITYPE ITYPE ITYPE III TYPE III, GRADE I TYPE III, GRADE I TYPE IIIYESKARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP. CORP.# 78AF # 155AF # 229AF AR # 297AF AQUA-#501 AF # 505AF #97 #97 AF #100 AF #19 ULTRACOLD ADHESIVE AMPHIBIKOTE ELASTOMERIC LUM EMULSION ELASTO-BRITE ELASTO-BRITE FIBERED FIBERED NONFIBERED RUBBERCEMENT WET / DRY ALUMINUM M ALUMINUM ALUMINUM EMULSION FLASH CEMENTPENDING PENDING CLASS A CLASS A CLASS AYESYESTYPE IIITYPE ITYPE IITYPE IIITYPE I TYPE I TYPE ITYPE IIIYESYESTYPE II545

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME KARNAK KARNAK KARNAK KARNAKCORP. CORP. CORP. CORP.2. PRODUCT NAME #81 AF # 169AF NF # 170AF # 220AFMOD BIT ALUMINUM TAR BRUSHADHESIVE CEMENT EMULSION3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)YESCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)TYPE II4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE I4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; orTYPE III4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)YES4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)TYPE II4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME KARNAK KEMPER KOKEM METACRYLICSCORP. SYSTEMS, INC. PRODUCTS,INC.2. PRODUCT NAME # 155KEMPEROL SUNGUARD ACRYLICAMPHIBIKOTEGRAYWET / DRY3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A, B CLASS A, B CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)CLASS AFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)TYPE I4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)YES4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED X546

Roof Cements and Coatings Part 2: Technical DataMETACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICS METACRYLICSACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC GEL BASE ACRYLICSTORM CLOUD BEIGE DESERT BRICK RED CUSTOM PRIMER BASE WHITESANDCLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS ANONONO YES YES YESTYPE I, IIITYPE IMETACRYLICS METACRYLICS METACRYLICS METACRYLICS MONSEY MONSEY MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO.ACRYLIC ACRYLIC ACRYLIC PRIMERMETALSHIELD #227 PRO GRADE #226 PRO GRADE #300 PREMIUM ASBESTOS FREE #842 PRO GRADEWHITE GEL COLORS ELASTOMERIC ASBESTOS FREE AF PLASTIC ALUMINUM ALUMINUM AF ALUMINUMROOF COAT WHITE FLASH CEMENT ROOF CEMENT ROOF COATING ROOF COATING FOOF COATINGCLASS A CLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS A CLASS ANO NO YES YESYESYESNOTYPE ITYPE ITYPE II TYPE III TYPE IIITYPE ITYPE I547

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME #300 AF ALUMINUM PREMIUM BLIND NAILINGALUMINUM ROOF PAINT FIBERED ROOF COLD CEMENT /3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDROOF COATING UNFIBERED COATING ROOF ADHESIVETYPE IIITYPE ITYPE ITYPE II1. COMPANY NAME MONSEY MONSEY MONSEY MONSEYDIVISION OF DIVISION OF DIVISION OF DIVISION OFHENRY CO. HENRY CO. HENRY CO. HENRY CO.2. PRODUCT NAME METALSHIELDELASTIC #27 PRO GRADE LONG-LIFE AFELASTOMERIC ROOF FLASHING ALL WEATHERROOF COATING SEALER CEMENT CEMENT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)YESCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)TYPE I, CLASS 1, 2 TYPE I, CLASS I4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)YES4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED548

Roof Cements and Coatings Part 2: Technical DataMONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY MONSEY NATIONALDIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF DIVISION OF COATINGSHENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. HENRY CO. CORP.#818 AQUA- ASPHALT FIBERED MBA GOLD MOD MB GOLD #911 PRO GRADE #113 PRO GRADE #225 PRO GRADE SPRAY MASTIC LONG-LIFE ACRYSHIELDBRIGHT ASPH EMULSION BIT MEMBRANE ELASTOMERIC WET SEAL ASPHALT AF ALL WEATHER COATING PREMIUM FIBEREMUL ALUMCOATCLASS AROOF COATING ADHESIVE FLASHING CEM ROOF REPAIR PRIMER CEMENT ASBESTOS FREE ROOF COATCLASS ACLASS AYESYESTYPE II, CLASS ITYPE ITYPE ITYPE I TYPE I TYPE ITYPE IIIYESYESXNATIONAL REPUBLIC REPUBLIC REPUBLIC REPUBLIC REPUBLIC R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCOATINGS POWDERED POWDERED POWDERED POWDERED POWDERED CO. CO. CO. CO.CORP. METALS INC. METALS INC. METALS INC. METALS INC. METALS INC.ACRYFLEXPERMAFLEX ALUMIINATION GEOGARDSOLARGARD SOLARGARD NO. 301 NO. 714 NO. 315 NO. 071 TAR BASE301 HY-BUILDE FIBRATED LIQUID FIBRATED LIQUID ASPHALT PLASTICROOF COATING ROOF COAT AF ROOF PRIMER ROOF CEMENTCLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS A CLASS A CLASS AYESYESTYPE IITYPE ITYPE ITYPE IIIYESX549

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCO. CO. CO. CO.2. PRODUCT NAME N0. 351 NO. 753 NO. 751 NO. 215 ALUMKWIK-SET POLYESTER KWIK-SET ROOF COATING3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDCEMENT MASTIC CEMENT AF AF (FIBRATED)TYPE IITYPE IITYPE IITYPE III1. COMPANY NAME R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCASCO. CO. CO. CO.2. PRODUCT NAME NO. 215 ALUM NO. 079 TAR BASE NO. 736 ELASTO-NO. 779 ASPHALT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKEDROOF COATING PLASTIC MERIC MOD BIT ROOF CEMENT(NONFIBRATED) WET SURFACE ADHES BRUSH WET SURFACEAFTYPE IYESTYPE I, GRADE 2TYPE IYES550

Roof Cements and Coatings Part 2: Technical DataR.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS R.M. LUCAS SOUTHWESTERN SOUTHWESTERN SOUTHWESTERNCO. CO. CO. CO. CO. CO. CO. PETROLEUM PETROLEUM PETROLEUMCORP. CORP. CORP.NO. 718 3.8-LB. NO. 618 3.8-LB. NO. 371 ASPHALT NO. 771 ASPHALT NO. 379 ASPHALT NO. 766 ELASTO- NO. 748 3 LB. HEAVY DUTY HEAVY DUTY HEAVY DUTYALUM ROOF ALUM ROOF PLASTIC PLASTIC ROOF PLASTIC WET MERIC MOD BIT ALUM ROOF COAT ROOF COATING PRIMER PATCHINGAF (FIBRATED) COAT (NONFIBRATED) COAT ROOF CEMENT CEMENT AF SURFACE ADHES TROWEL AF FIBERATED COMPOUNDYESTYPE III TYPE I TYPE IIITYPE ITYPE I, CLASS IITYPE I, CLASS ITYPE I TYPE I TYPE IYESTYPE III, GRADE 2SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SOUTHWESTERN SPM THERMO- TAMKO TAMKOPETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM PETROLEUM SHIELD INC. ROOFING ROOFINGCORP. CORP. CORP. CORP. CORP. CORP. CORP. PRODUCTS PRODUCTSHD GRAVEL ROOFFLEX-SHIELD ALUMINUM ADHESIVE #9 ALUMINUMHD GRAVEL ROOF FLEX-SHIELDSPM THERMO-TAM-PRO HEAVY TAM-PROPRESERVATIVE "EM" ROOF ROOF ROOF RESERVATIVE ROOF COATING SHIELD ROOF BODY FLASHING FIBERED ALUM(ASPHALT) COATING COATING SHIELD (COAL TAR) COATING CEMENT ROOF COATCLASS A, B, C CLASS A CLASS ACLASS A, B, CCLASS AYES NO NOTYPE IVTYPE IVTYPE ITYPE III TYPE I TYPE IIITYPE ITYPE IIIYESYES551

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME TAMKO TAMKO TAMKO TAMKOROOFING ROOFING ROOFING ROOFINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS2. PRODUCT NAME TAM-PRO TAM-PRO FIRE TAM-PRO CPA TAM-PRO CPANONFIBER ALUM RATE (FR) FIBER SBS ADHESIVE SBS FLASHINGROOF COAT ALUM ROOF COAT CEMENT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A CLASS AFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO YES NO NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)TYPE I TYPE III4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; orTYPE II4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)YES4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME TAMKO TAMKO TAMKO TAMKOROOFING ROOFING ROOFING ROOFINGPRODUCTS PRODUCTS PRODUCTS PRODUCTS2. PRODUCT NAME TAM-PRO Q-15TAM-PRO TAM-PRO TAM-PROELASTOMERIC ASPHLAT PLASTIC FIBEREDFLASHING CEM PRIMER ROOF CEMENT ROOF COAT3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C)Fire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C)FM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no) NO NO NO NOCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)YES4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)TYPE I4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)TYPE ITYPE I4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)YES4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED552

Roof Cements and Coatings Part 2: Technical DataTAMKO TAMKO TAMKO TEXAS TEXAS TEXAS TOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC.,ROOFING ROOFING ROOFING REFINERY REFINERY REFINERY SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OFPRODUCTS PRODUCTS PRODUCTS CORP. CORP. CORP. GAF MATERIALS GAF MATERIALS GAF MATERIALS GAF MATERIALSTAM-PRO TAM-PRO TAM-PRO WET / TEXOTROPIC MIGHTYPLATE MIGHTYPLATE II TOPCOAT FLASHING SB-900 SKYLITEFIBERED EMUL COLD APPLY DRY PLASTIC ROOF MEMBRANE GRADE FLASHINGCOATING CEMENT ROOF CEMENT COATING GRADECLASS A CLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS AYES NO NO YES YES NO NOTYPE IVTYPE ITYPE IIIYESTOPCOAT, INC., TOPCOAT, INC., TOPCOAT, INC., TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO, TREMCO,SUBSIDIARY OF SUBSIDIARY OF SUBSIDIARY OF INC. INC. INC. INC. INC. INC. INC.GAF MATERIALS GAF MATERIALS GAF MATERIALSMB PRIMING FLEXSEAL MP-300 POLYROOF TREMFIX FIBERMAT SHEETING TREMPRIME DOUBLE DUTY POLARCOTESYSTEM L.V. BOND W.B. ALUMINUML.V.CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS ANO NO NO YES YES YES553

Roof Cements and Coatings Part 2: Technical Data1. COMPANY NAME TREMCO, TREMCO, TREMCO, TREMCO,INC. INC. INC. INC.2. PRODUCT NAME TREMLASTIC ECOLASTIC ELS TREMLARLRM-H3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A CLASS A CLASS A CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A CLASS A CLASS A CLASS AFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)YESCOMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED1. COMPANY NAME TREMCO, TREMCO, TREMCO, TREMCO,INC. INC. INC. INC.2. PRODUCT NAME TREMLAR TREMLITE TREMLITE TREMLITELRM-V METAL PRIMER MASTIC COATINGWB3. FIRE RATINGUL Classification(s) as a Part of Any <strong>Roofing</strong> System Per ANSI/UL 790 (Class A, B, and.or C) CLASS A CLASS A CLASS A CLASS AFire Rating(s) as a Part of Any Roof System Per ASTM E 108 (Class A, B, and/or C) CLASS A CLASS A CLASS A CLASS AFM CLASS 1 Fire Rating as a Part of Any Roof System (yes/no)COMPLIES WITH:4A ASTM D 41-94 Standard Specification For Asphalt Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4B. ASTM D 43-94 Standard Specification For Coal Tar Primer Used in <strong>Roofing</strong>, Dampproofing, andWaterproofing (yes or no)4C. ASTM D 1227-95 Standard Specification For Emulsified Asphalt Used As A Protective Coating ForBuilt-Up <strong>Roofing</strong> (Type I, II, III, IV, or no response)4D. ASTM D 2823-90 Standard Specification for Asphalt Roof Coatings (Type I, II, or no response)4E. ASTM D 4479-93 Standard Specification Foro Asphalt Roof Coatings - Asbestos Free (Type I, II orno response)4F. ASTM D 2824-94 Standard Specification For Aluminum Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, And Fibered Without Asbestos (Type I, II, III or no response)4G. ASTM D 2822-91 Standard Specification For Asphalt Roof Cement (Type I and Class I or Class II,or Type II and Class I or II, or no response)4H. ASTM D 4586-93 Standard Specification for Asphalt Roof Cement, Asbestos Free (Type I, II, or noresponse)4I. ASTM D 3019-94 Standard Specification For Lap Cement Used with Asphalt Roll <strong>Roofing</strong>, Nonfibered,Asbestos Fibered, and Non-Asbestos Fibered (Grade 1 or 2, Type I; Type II; Type III; or4J. ASTM D 3409-93 Standard Test Method For Adhesion Of Asphalt-Roof Cement To Damp, Wet, OrUnderwater Surfaces (yes or no response)4K. ASTM D 4022-94 Standard Specification For Coal Tar Roof Cement (yes or no response)4L. ASTM D 3747-95 Standard Specification For Emulsified Asphalt Adhesive For Adhering RoofInsulation (Type I, II, or no response)4M. ASTM D 1187-95 Standard Specification For Asphalt-Base Emulsion Used As Protective CoatingsFor Metal (Type I, II, or no response)4N. ASTM D 3468-90 Standard Specification For Liquid-Applied Neoprene And ChlorosulfonatedPolyethylene Used In <strong>Roofing</strong> And Waterproofing (Grade or 2, Type I; Type II; or no response)5. SEE APPENDIX IF CHECKED554

Roof Cements and Coatings Part 2: Technical DataTREMCO, TREMCO, UNIFLEX UNIFLEX UNIFLEX UNIROOF UNITED UNITED UNITED UNITEDINC. INC. COATINGS COATINGS COATINGS COATINGSPOLARCOTE TREMLASTIC S UNIFLEX 500 ALUMINUM LO-VOC FORMFLEX ROOFMATE BERM 500 BERM 600 / ELASTRON 858FR ALUMINUM PATCH ALUMINUM 6000 UNITED 600(10 YR.) CEMENT (10 YEAR)CLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS ACLASS A CLASS A CLASS A CLASS A CLASS A CLASS A CLASS AYES YES YES YES YES YES NOTYPE IIITYPE IIITYPE III555

Appendix, Cement and CoatingsERSYSTEMSCoatings: The elastomeric coatings include acrylic,urethane, silicone and Hypalon7 coatings for metal,concrete and foam roof and metal and concrete wallsystems.The Metal Roof Restoration System is designed torenew a metal roof - protect it from rusting, waterproofall seams, fasteners and roof penetrations withoutfabric or tapes, and restore the metallic finish for longterm preservation. Available as a water-based acrylicsystem or polyurethane system.The Single Ply Restoration System addresses thelimitations of the original single-ply system (i.e., weakEPDM seams and flashings) and then provides forcoating the membrane to reduce the temperature of theroof and deterioration against the elements.Spray-Applied Polyurethane Foam: The ER FoamSystem consists of sprayed-in-place polyurethane foamused in conjunction with ERSystems elastomericcoatings. 2.7# and 3.0# roofing foam and 2.0#residential foam is available. ER Foam is typified withhigh density high compressive foam with good yieldand smooth texture. Foam is protected for the UV andweather with acrylic elastomers (Eraguard 1000),polyurethane elastomers (Erathane 300), or siliconeelastomers (Eraguard 4000).Slo-Low Rise Adhesive: Used for rapid means offully adhering the board stock to the deck and can beeasily applied with the ERSprayer. Perfect for adheringinsulation board to hard-to-fasten decks.NATIONAL COATINGS CORP.Acryshield complies with ASTM D 6083-97A, StandardSpecification For Liquid Applied Acrylic Coating Used in<strong>Roofing</strong>. Acryflex complies with both ASTM C920-98,Standard Specification for Elastomeric Joint Sealantsand Federal Specification TT-S-00230C, Class A.GRUNDY DIVISION OF HENRY CO.PlyGrip Modified Bitumen Adhesive acheives a ULClass A rating as an alternative to hot mopping asphaltfor adherence of base/ply and/or SBS modified bitumenmembranes for many roofing systems classifications.When using PlyGrip with SBS modified bitumenproducts, obtain the membrane manufacturers’sapproval before proceeding.A1MB-AF applied at a rate of 1 to 2 gallons persquare provides a UL Class A rating over BUR andnumerous modified bitumen membranes.HENRY COMPANY#111 Insulboard Roof Insulation Adhesiver is a solventfreerubberized asphalt emulsion formulated forlaminating solvent-sensitive polystyrene foam boardsand adhering it to a variety of overlay boards andsubstrates. It is ideal for tapered insulation systems.556

Information on Section 5: Roof Membrane Warranties<strong>General</strong> InformationSection 5: Roof Membrane Warranties in the 2000edition of NRCA’s Low-Slope <strong>Roofing</strong> MaterialsGuide provides information on warranties offered bymaterial manufacturers applicable to their built-up,modified bitumen, and single-ply membrane productslisted. The information is derived from two sources:an examination of the warranty or guaranteedocument itself and the manufacturer’s responses toa questionnaire sent by NRCA.All manufacturers with the referenced categories ofmembrane products appearing in the guide areinvited to submit their warranties for examination andlisting. Those without warranty listings have electednot to participate.For each warranty there are 27 categories, or items,of information listed. The information provided in thefollowing categories was obtained by examination ofthe document itself:No.Item of Information1 Identity of issuing entity4 Scope of coverage6 Nature of remedy8 Notification of requirements9 Exclusive of additional remedy10 Inclusion of consequential damages11 Determination of warranty applicability12 Specific exclusions from coverage14 Specific conditions to make warrantyineffective or null and void25 Assignability26 Special features/conditions27 Executed by ownerIn addition, information in the following categorieswas provided by the manufacturer in response to aquestionnaire accompanying the warranty document.No.Item of Information2 Title, original publication date, and identifyingsymbol (if any)3 Product specification5 Length of coverage13 Wind coverage/exclusion15 Cost to obtain16 Minimum charge18 Pre-construction notice and approvalrequirement19 Approved, authorized, or licensed contractor20 Job inspection policy21 Contractor’s post-installation obligation23 Issuing entity manufacturers and/or sellsproducts24 Conditions for renewal or extensionIn response to this information, NRCA endeavors toprepare an accurate, comprehensive, and objectivelisting for each warranty submitted by a manufacturer.<strong>General</strong>ly, a separate listing is generated for eachdocument; sometimes, however, a manufacturer uses thesame warranty document to cover different roofingsystems, specifications, or products, and in addition, thelengths of coverage, the cost to obtain it, the minimumcharge, or the monetary limitations may vary. In suchcases, there may be more than one listing for a particularwarranty reflecting these differences.A blank space appears for a category of information if amanufacturer does not provide the relevant data.Brackets ([ ]) are used in the listing to indicate informationthat a manufacturer feels is pertinent but may not becontained in the document or at least was not apparent toNRCA in its review. In effect, the use of bracketedstatements provides a means for manufacturers todisagree with the analysis made of the document byNRCA; in some instances, these statements may evencontradict NRCA’s conclusions concerning the import oflanguage in a warranty.It should be noted that the name of the manufacturer as itappears in Item 1, Issuing Entity, may not necessarily beidentical to or even the same as the one listed in themembrane index or elsewhere in the membrane section.This is because the name appearing in the warrantysection is the name of the entity appearing in thewarranty document itself. For example, if a manufacturerchanges its corporate name but does not change awarranty document that bore its original name, theoriginal name will appear in the warranty section. Or ifone company purchases the assets of another, uponrequest NRCA simply moves the name of the companythat acquired it. In the warranty section, on the otherhand, this is not possible until warranty documentsbearing the new corporate name are provided to NRCA.The name of the entity must remain as it appears in thedocument. An explanation of such situations issometimes provided in a footnote in the warranty sectionin order to clarify an apparent discrepancy in its corporatename.By necessity, the warranty listing in the guide presentsrather succinctly a great deal of information contained inthe manufacturers’ warranties, as well as the policiessurrounding them. For this reason, the reader shouldobtain and examine the warranty document itself, discussadditional questions with a representative of the partyissuing the warranty, and obtain professional advice fromcounsel when desired. A warranty has significant legalconsequence; therefore, all parties should understand thedocument at the outset of a construction project topreclude subsequent misunderstandings.The firm of Hendrick, Phillips, Schemm & Salzman,Atlanta, Ga., in coordination with NRCA staff prepares559

the warranty section of the Low-Slope <strong>Roofing</strong>Materials Guide.Understanding the Warranty ListingFollowing are descriptions of the kind of data that iscontained in the 27 categories of information includedin each warranty listing.1. Identity of issuing entity: This is the name of thelegal entity that issues and is obligated to honor thewarranty document. In most cases, this entity is themanufacturer of the product covered by the warranty(but see the explanation of item 23 for moreinformation in this regard.)2. Title, original publication date, and identifyingsymbol (if any): The title listed is the title printed onthe warranty document. The original publication dateis the date that the manufacturer first promulgatedthe warranty form; the document may subsequentlybe reprinted in the exact same form. Somemanufacturers' warranties contain an identifyingsymbol, or code, that is frequently a combination ofnumbers and letters, usually in the bottom right-handor left-hand corner of the document. This identifyingsymbol indicates the precise document that wasreviewed by NRCA. (For the reader to be certain thatthe warranty document he has in his possession isthe same one listed in the guide, the title of thedocument and the identifying symbol, if any, shouldmatch exactly.)3. Product, specification, or system covered:This is an enumeration of the manufacturer’sproducts, roof specification, or roofing systems thatare covered by the warranty. If properly updated bythe manufacturer, the reader should be able toidentify these product listings in the membranesection.4. Scope of coverage: In most cases, the initialportion of this entry will be either material andworkmanship or material only* (Material andworkmanship indicates that the warranty covers botha defect in the materials supplied by themanufacturer and a deficiency in the workmanship ofthe application. The term workmanship refers to theworkmanship of the contractor and is meant toindicated whether proper or defective workmanshipon the part of the roofing contractor/applicator isencompassed under the manufacturer’s warranty.)After this entry is made, ensuing information suppliedin this category usually corresponds to the languageused in the warranty document. Virtually all roofmembrane warranties provide only for repairs toleaks, regardless of whether they cover materialsonly or materials and workmanship.*Note: If the manufacturer’s warranty covers defectivematerial and the remedy includes replacement of thedefective material plus labor necessary to replace thatdefective material with the new material, but the warrantydoes not state that a leak caused by improper applicationon the roofing applicator is covered, the initial entry underscope of coverage will not state material andworkmanship. The fact that the manufacturer will providethe labor necessary to replace defective material iscovered under Item 6 Nature of Remedy.5. Length of coverage: This is the number of years forwhich the manufacturer will issue the warranty. In mostinstances, this period commences upon the completion ofthe roof installation final inspection and approval by themanufacturer. In a few instances, particularly in cases ofmaterial-only warranties, the coverage period may beginat the time of sale or invoice date.6. Nature of remedy: This states what action themanufacturer will take in the event that there is a problemwith the roof covered under the warranty. The languageused in this category generally parallels that appearing inthe warranty document. For most roof membranewarranties, the remedy provided is the repair of leaks.7. Monetary limitations: The information provided forthis category indicates whether a warranty contains amonetary limitation of the manufacturer’s obligation underits warranty. The phrase none stated indicates that thereis no monetary limitation stated in the document,meaning that the manufacturer is obligated to spendwhatever sum is necessary in order to honor its warranty.Although most commercial roofing warranties in usetoday do not contain specific penal sum limitations (ashistorically was included in roofing bonds offered byroofing materials manufacturers and their sureties), manywarranties limit the manufacturer’s liability over the life ofthe warranty to the owner’s original cost of the installedroof system. Some warranties, particularly material-onlyones, are limited to the original purchase price of thematerials; others are limited to a particular per-squareamount based on the size of the roof. The existence ofor the amount of a monetary limitation may be dependentupon the specific manufacturer’s specification or productused. If the manufacturer prorates the maximum amountavailable over the life of the warranty, proratinginformation is included as well. The prorating is usuallyexpressed in terms of a percentage available in the lateryears of a roof warranty.8. Notification requirements: In this category isinformation concerning the action that an owner or otherclaimant is to take in order to make a warranty claim; ofparticular importance is the prescribed time period inwhich a leak or defect is to be reported to themanufacturer. If the warrant contains specific notificationrequirements, they are set forth here. Most warrantiesrequire that claimants provide the manufacturer with560

written notice of a warranty claim within 30 days ofthe discovery of a leak or purported defect. Somewarranties require notice within 10 days and/or thatwritten notice be sent by registered or certified mail.9. Exclusive or additional remedy: Under generallegal principles, unless the warranty documentspecifically excluded other warranties and remediesthat may be available to the owner and the owneragrees to be bound by the warranty terms, the rightsand remedies set forth in the warranty document arein addition to those warranties, rights and remediesthat may be available to the owner or other claimantunder state statutory or common law. In addition toproviding an owner with specific rights, warrantydocuments are frequently used as a liability-limitingdevice so that the liability of the party issuing thewarranty is limited to what is prescribed in thewarranty document. If the warranty states that it is anexclusive warranty and is issued in lieu of all otherwarranties, the claimant may not be entitled to seekrecovery from the manufacturer based on the breachof any other warranties, express or limited.The manufacturer’s warranty may exclude or seek toexclude the implied and express warrantiesestablished by the Uniform Commercial Code (UCC).The UCC, as adopted in most states, provides that awarranty is implied in a contract for sale of goods thatthe goods shall be merchandise if the seller is amerchant of goods of that kind. To be merchantable,goods must be fit at least for the ordinary purpose ofwhich such goods are used, must conform to thepromises or affirmations made on the container orlabel, and must pass without objection in the tradeunder the contract description. An implied warrantyof fitness for a particular purpose is created under theUCC when the seller at the time of contracting hasreason to know any particular purpose for which thegoods as required and that the buyer is relying on theseller’s skill or judgment to select or furnish suitablegoods.In addition to those implied warranties, the UCCprovides that express warranties are created whenthe seller (1) makes an affirmation of fact or promiseto the buyer that relates to the goods and becomes apart of the basis of the bargain; (2) gives adescription of the goods that is made part of the basisof the bargain; (3) provides a sample or model of thegoods that is made a part of the basis of the bargain.UCC implied warranties may be excluded inaccordance with the requirements set forth in theUniform Commercial Code.In addition to seeking to make the warranty anexclusive warranty, a manufacturer’s warranty mayseek to limit the other remedies that the law wouldotherwise make available to a claimant. A warrantythat states that it is the owner’s exclusive remedymight limit the claimant’s rights to the terms of thewarranty and preclude a claim based on another legaltheory of liability. Some warranty documents state thatremedy provided in the warranty is the owner’s “sole andexclusive remedy” and is the manufacturer’s sole liabilityand obligation in the event of a roof problem regardlessof whether the owner might otherwise be entitled topursue a legal claim for breach of contract, negligence oranother legal theory of recovery.The purpose of the category Exclusive or AdditionalRemedy is to give the reader an indication as to how themanufacturer’s warranty may impact other warranties andremedies that may be available to an owner. The phraseexcludes UCC warranties in this category means that itappears that the warranty document complies with theUCC requirement to exclude warranties establishedunder the Uniform Commercial Code.10. Inclusion of consequential damages: Theword no in this category indicates that the warranty doesnot have to cover consequential damages that may resultfrom a roof leak, such as damage to the interior of thebuilding. The majority of roof warranties expresslyexclude consequential damages.11. Determination of warranty applicability: Somewarranties state explicitly that the manufacturer has theright to determine whether a leak is covered or excludedfrom warranty coverage. The entry manufacturer’sdetermination indicates that the manufacturer reserves toitself the right to determine whether a leak is covered orexcluded from warranty coverage. Under thesecircumstances, the manufacturer’s determination may bebinding, even if it is erroneous and regardless of whetherother parties disagree, provided that the manufacturer’sdetermination was made in good faith. If the entry in thiscategory states neutral (no provision), themanufacturer’s warranty does not contain an explicitprovision giving it the right to determine whether thewarranty is or is not applicable to a problem. In the eventof a dispute concerning the warranty’s applicability, aneutral party would ultimately decide whether thewarranty is applicable in this case.12. Specific exclusions from coverage: Most roofingwarranties state the leaks resulting from certainenumerated caused (e.g., natural disasters, tornadoes,abuse or misuse) will not be covered. A numeric code isused in this category to reference specific exclusionsfrom coverage, a key for which is provided below. Thelist of specific exclusions is a compilation of thoseappearing in the warranty documents submitted toNRCA; the language appearing in the index is notnecessarily the exact language appearing in a specificwarranty document, but it reflects the same exclusion.The absence of a specific exclusion from coverage doesnot necessarily mean that a warranty will be applicable toa condition or occurrence not specifically excluded. Theapplicability of the warranty will generally be determined561

from the information contained under the categoryScope of Coverage.<strong>Index</strong> of Specifically Enumerated Exclusion fromCoverage1. Natural disasters and acts of God (lightning,tornadoes, earthquakes)2. Hail3. Acts of negligence, abuse or misuse, accidents,vandalism, civil disobedience, war4. Damage by structural failure, settlement,movement, distortion, warpage, displacement ofstructure5. Failure of the material and/or metal work notsupplied by the manufacturer issuing thewarranty; movement of metal work6. Repairs or alterations of roof or installation ofstructures, fixtures, or utilities on or through roofwithout prior approval of manufacturer7. Defects in, failure or improper application of, roofinsulation, roof deck, or any other underlyingsurface or material used as a base over whichthe roof is applied8. Change in usage of building without prior writtenapproval of manufacturer9. Traffic or storage of materials on roof10. Moisture entering roof system through walls,copings, or any part of the building structure,including adjacent building11. Damage resulting from lack of positive, proper, oradequate drainage; ponding on the roof12. Negligence or failure of owner to use reasonablecare in maintenance of roof or failure to followmanufacturer’s maintenance specifications13. Environmental fallout, chemical attack or usewithin building of commercial or industrialsolvents, acids, caustic fluids, oils, waxes,greases, absorbent clays, or plasticizers14. Discoloration or change in usual appearance dueto acceleration or streaking of dirt or otherairborne material.15. Repairs performed or materials furnished byothers in correcting leaks unless specificallyauthorized and approved by manufacturer;unauthorized repairs; roof maintenance forcorrections other than leaks16. Fire17. Faulty construction or design of building,including parapet walls, copings, chimneys,skylights, vents, or roof deck18. Contaminants that may have not been approvedfirst or accepted by manufacturer; exposure to orcontact with damaging substances ordeteriorating substances or agents19. Defects or failure caused by misapplication ofmaterials or by application not in strict adherencewith roofing specification, application instructions,and approved practices20. Installation of roofing membrane21. Abnormal climatic conditions22. Infiltration or condensation of moisture in or throughunderlying area; vapor condensation beneath the roof23. Damages caused by falling objects24. Acts of parties other than manufacturer orunauthorized roofing contractor25. Penetration of the roof membrane by vegetation13. Wind coverage/exclusion: The purpose of thiscategory is to convey the manufacturer’s policy in regardto whether damage to the roof caused by wind is coveredunder the warranty. The information presented is basedupon an examination of the warranty document todetermine if it addresses the issue of leaks, damages, orconditions resulting from wind and the manufacturer’sresponse to questions concerning this issue.Many manufacturers’ warranties list either gales, stronggales, wind storm, and/or hurricanes and tornadoes asexamples of natural disaster or acts of God that arespecifically excluded from warranty coverage. In order toprovide more specific, affirmative information regardingthe manufacturer’s policy concerning wind coverage,NRCA asks manufacturers to identify the wind speed thatis covered by each of their warranties or to state that thewarranty does not cover damage to the roof caused bywind regardless of speed – meaning that any damageresulting from wind, even at extremely low speeds, isexcluded from the warranty coverage.The second sentence under Wind Coverage exclusioncategory, based on NRCA’s questions indicates whatspeeds, if any, the manufacturer covers. If NRCAbelieves that the manufacturer’s response is potentiallyinconsistent with the wind exclusions stated in thewarranty or creates an ambiguity, the manufacturer’sresponse is included in brackets. If the warrantydocument does not address the subject of wind, theinformation is based exclusively upon the manufacturer’sresponses to the NRCA wind questions. If themanufacturer does not respond to the wind questions butthe warranty addresses the subject of wind, theinformation is based exclusively on an examination of thewarranty document. If the category remains blank, thewarranty does not address the wind issue and themanufacturer did not respond to the wind questions.For example, a warranty may indicate that repairs,alterations, or additions without the prior approval of themanufacturer make the warranty null and void; this differsfrom the statement that a leak resulting from a repair oralteration not previously approved by the manufacturer isexcluded, or not covered, under the warranty. Analphabetic code is used in this category to referencespecific conditions to make warranty ineffective or nulland void; a key for which follows. The list of specificconditions is a compilation of conditions that appear inroof warranties submitted to NRCA; the languageappearing in the various conditions is not necessarily theexact language appearing in a specific warrantydocument.562

14. <strong>Index</strong> of Specific Conditions to MakeWarranty Ineffective or Null and VoidA. Lack of inspection at time of application orowner’s refusal to allow inspection.B. Repairs, alterations, and additions without priorapproval of manufacturer.C. Failure of the owner to pay all bills for roofinstallation and materials.D. Failure to notify within specified number of daysor transfer of ownership.E. Failure to submit accurate, completed inspectionreport or checklist, within prescribed time periodF. Failure to use reasonable care in maintenance;failure to follow manufacturer’s maintenanceinstructions.G. Failure to comply with terms and conditions ofwarranty.H. Failure to notify manufacturer within prescribedtime of discovery of leak.I. Owner’s unwillingness to accept manufacturer’swarranty in lieu of all other remedies and toreturn signed copy to manufacturer; owner’sfailure to execute the warranty.J. Change in building usage or a significant changein use of building affecting roof membrane.K. Assignment of warrant without written approval ofmanufacturer.L. Lack of validation by manufacturer.M. Failure of owner to make repairs to leaks notcovered by manufacturer’s warranty.N. Repair work by any contractor other thanapproved contractor or use of unapprovedcontractor.O. Building is used in any manner or for anypurpose other than the purpose for which it wasintended.P. Roof is used as a promenade or work deck.Q. Roof is flooded.R. Membrane or materials supplied by manufacturerare not applied according to manufacturer’sspecifications or instructions.S. Failure to repair damaged roof within specifiedtime period, by approved applicator.15. Cost to obtain: This is the amount, if any, thatthe manufacturer charges to obtain the warranty.The word None entered in this category means thatthere is no separate charge, apart from the cost ofpurchasing materials, for the warranty. When there isa separate charge, it will generally be stated on aper-square (100 square feet) basis.16. Minimum charge: If the manufacturer has aminimum charge policy for obtaining the warranty, theamount will be entered in this category.17. Ineligible structures or building use: If themanufacturer does not offer its warranties for roofson certain types of buildings or for buildings used forcertain purposes, the types of structures or usesineligible for warranty coverage will be listed here.Private residences may not be eligible for warrantycoverage even though a specific exclusion is not listed.<strong>General</strong>ly manufacturers with a warranty that excludesresidential properties intend to exclude single-familyhomes and similar structures, but they may still offer thewarranty for apartment buildings, cooperatives, orcondominium properties.18. Pre-construction notice and approvalrequirements: This category is where it is noted whetherthe manufacturer requires that it give notice and approvalprior to construction if the warranty is to be obtained atthe completion of the roofing installation. The preconstructionnotice and approval requirements, whereapplicable, generally pertain to the procedure to beemployed by the roofing contractor prior to commencingapplication.19. Approved, authorized, or licensed applicators:Most manufacturers require that the roof be installed by aroofing contractor who is “approved,“ “authorized,” or“licensed” by the manufacturer in order for the warranty tobe obtained. The entry of Yes here means that thecontractor must be so approved, authorized, or licensed.(The nature of the relationship between the manufacturerand the contractor is frequently defined in a separatecontract.) The entry of No indicates that themanufacturer does not require the use of a contractorapproved, authorized or licensed by the manufacturer inorder for the warranty to be obtained.20. Job-inspection policy: This category encompassesin a summary manner the job-inspection policy, if any, ofthe manufacturer and is where it will be indicated if themanufacturer’s representative makes an on-siteinspection prior, during, or upon completion ofapplication, as well as some time after application. In thiscategory it will also be indicated whether there is aninspection charge or fee for any on-site job inspections.21. Contractor’s post-installation obligation: Thiscategory briefly covers the manufacturer’s policyregarding an obligation by the contractor to make repairsafter issuance of the warranty. While the manufacturer’swarranty itself rarely makes a reference to any obligationby the contractor to make repairs, there may be aseparate agreement between the manufacturer and thecontractor concerning such an obligation.22. Backed by name insurance or surety company: Inthis category it will be indicated whether an insurancecompany or surety is listed on the face of the warrantydocument and whether the manufacturer has insuranceapplicable to its warranty obligations. The entry of Noindicates that no surety or insurance company is namedon the face of the warranty document, meaning that theowner or other claimant would not be entitled to assert aclaim against an insurance company or surety in theevent the manufacturer was unable to satisfy its warrantycommitments.563

NRCA also asks manufacturers if they carryinsurance covering their warrant obligations, and, ifso, the type and amount of coverage. Themanufacturer’s response is included as the secondpart of the information provided in this category.23. Issuing entity manufactures and/or sellsproducts: In this category is indicated whether theentity issuing the warranty is both the manufacturerand seller of the roofing materials covered under thewarranty or whether the party issuing the warranty isonly the seller of these materials. The information issupplied to NRCA in response to a questionconcerning this issue.24. Conditions for renewal or extension: In thiscategory is indicated whether a manufacturer’swarranty can be extended or renewed and, if so, theprocedures to be employed as well as additionalcosts incurred in doing so.25. Assignability: Like other legal documents,warranties can generally be “assigned” or“transferred” by one party to another, unless there isa specific prohibition against such assignment.Some roofing warranties contain such prohibitions,and some state specifically that no assignment ortransfer will be allowed without the prior writtenpermission of the manufacturer. The phrase Norestrictions stated indicates that the warrantycontains no provisions barring, limiting, orconditioning the owner’s right to assign the warrantyto a subsequent building owner, tenant, or otherparty.26. Special features/conditions: In this categoryare relatively unique or unusual features, conditions,or limitations. This category is generally based onthe warranty document itself, but sometimes may bebased on information supplied by the manufacturer.27. Executed by owner: In this category is indicatedwhether the manufacturer’s warranty form states onits face that it is to be signed by the owner. Requiringthe roofing warranty to be executed by the ownermakes it more likely the owner will be bound to theterms and conditions set forth in the document in theevent that a question subsequently arises as towhether the owner agreed to the terms andconditions in the warranty.564

<strong>Index</strong> to WarrantiesWarrantyWarrantyALLIED SIGNAL ROOFING SYSTEMS 570 CELOTEX CORP. 5842000 Regency Parkway, Suite 225 4010 Boy Scout Blvd.Cary, NC 27511-8507 Tampa, FL 33607919/461-0670 or 800/221-6490 813/873-1700FAX: 919/461-4720 FAX: 813/873-4080E-mail: alliedroof@alliedsignal.comE-mail:Web: alliedroof.comWeb:AMERICAN LUBRICANTS CO. 574 CONKLIN CO. 5881227 Deeds Avenue P.O. Box 155Dayton, OH 45401 Shakopee, MN 55379-0155937/222-2851 800/888-8838FAX: 937/461-7729 FAX: 612/496-4285E-mail:E-mail: marketing@conklin.comWeb:Web: www.conklin.coBARRETT COMPANY 574 DANOSA CARIBBEAN, INC. 5903422 Old Capitol Trail Box 13757, Santurce StationWilmington, DE 19808 San Juan, PR 00908800/647-0100 809/785-4545FAX: FAX: 809/787-3092E-mail:E-mail: danosapr@icepr.comWeb:Web:BITEC INC. 578 DERMABIT WATERPROOFING IND. 590#2 Industrial Park Drive P.O. Box 273Morrilton, AR 72110 Alexandria, VA 22313-0273800/535-8597 703/739-2801FAX: 501/354-3019 FAX: 703/739-2802E-mail: dga@bitec.comE-mail:Web: www.bi-tec.comWeb: www.dewitt@globalbiz.comBONDCOTE ROOFING SYSTEMS 580 DIBITEN 592984 Southford Road P.O. Box 5108Middlebury, CT 06762 Denver, CO 80217-5108800/368-2160 800/342-4836FAX: FAX: 303/978-3904E-mail:E-mail:Web:Web:BURKE INDUSTRIES 580 DURO-LAST INC. 5942250 South 10th Street 525 Morley DriveSan Jose, CA 95112 Saginaw, MI 48601408/297-3500 or 800/297-7010 800/248-0280FAX: 408/280-0938 FAX: 800/432-9331E-mail:E-mail:Web:Web:CARLISLE SYNTEC INC. 582 (ENSURCO) DURADEK, U.S., LTD. 596P.O. Box 70001722 Iron StreetCarlisle, PA 17013 North Kansas City, MO 84116717/245-7000 800/338-3568FAX: 717/245-7245 FAX: 816/421-2924E-mail:E-mail: duradek@kcnet.comWeb:Web:565

<strong>Index</strong> to WarrantiesWarrantyWarrantyERSYSTEMS 598 HERBERT MALARKEY COMPANY 618Elastomeric <strong>Roofing</strong> Systems, Inc. P.O. Box 1721750 Medina Street Portland, OR 97217-0217Loretto, MN 55357-0056 603/283-1191 or 800/545-1191612/479-6690 FAX: 612/479-6691 FAX:E-mail: ersinfo@ersystems.comE-mail:Web: www.ersystems.comWeb:FIRESTONE BUILDING PRODUCTS CO. 600 IMPERITALIA S.P.A. 620525 Congressional Blvd. Strada Lanzo 131Carmel, IN 4603210148 Torino, ITALY800/428-4442 11-262-0941FAX: FAX: 11-262-1621E-mail: firestonebpco.comE-mail:Web:Web:FLEX MEMBRANE INTERNATIONAL 604 INTEC/PERMAGLAS 620Bethelem Drive P.O. Boxo 2845Morgantown, PA 19543 Port Arthur, TX 77643610/286-7788 800/231-4631FAX: 610/286-7786 FAX: 409/724-2348E-mail: flexroof@compuserv.comE-mail: support@usintec.comWeb:Web:GAF MATERIALS CORP. 606 INTERNATIONAL DIAMOND SYSTEMS 6201361 Alps Road P.O. Box 351950Wayne, NJ 07470 Toledo, OH 43635973/628-3000 419/382-0111FAX: 973/628-3451 FAX: 419/382-3275E-mail:E-mail:Web: gaf.comWeb:GENFLEX ROOFING SYSTEMS 612 JOHNS MANVILLE INTERNATIONAL 6221722 Indian Wood Circle <strong>Roofing</strong> Systems GroupMaumee, OH 43537 P.O. Box 5108800/448-4272 Denver, CO 80217FAX: 419/891-4436 303/978-2000E-mail: FAX: 303/978-3904Web: www.genflex.comE-mail:GRACE & CO., W.R. 616 JPS ELASTOMERICS 62862 Whittemore Avenue 9 Sullivan RoadCambridge, MA 02140 Holyoke, MA 01040-2800617/876-1400 800/621-ROOFFAX: FAX: 413/552-1198E-mail:E-mail: info@stvroof.comWeb:Web:HENRY COMPANY 618 KOPPERS INDUSTRIES INC. 6302911 Slauson Avenue 436 Seventh AvenueHuntington Park, CA 90255 Pittsburgh, PA 15219213/583-5000 800/558-2706FAX: 213/582-6429 FAX: 412/227-2002E-mail:E-mail:Web:Web: www.koppers.com566

<strong>Index</strong> to WarrantiesWarrantyWarrantyMBTECHNOLOGY CORPORATION 632 ROOFING PRODUCTS INTERNATIONAL 644188 South Teilman Avenue 57460 Dewitt StreetFresno, CA 93706 Elkhart, IN 46517800/621-9281 800/628-2957 or 219/293-9096FAX: 209/233-4607 FAX: 219/294-3450E-mail:E-mail:Web:Web: www.roofingproductsint. ComMONSEY BAKOR 636 SARNAFIL INC. 646363 Cold Stream Road 100 Dan RoadKimberton, PA 19442 Canton, MA 02021800/523-0268 800/451-2504FAX: 610/933-4598FAX:E-mail: monsey-bakor.comE-mail:Web:Web:MULE HIDE PRODUCTS CO., INC. 636 SEAMAN CORPORATION 6462924 Wyetta Drive FiberTite <strong>Roofing</strong> SystemsBeloit, WI 535111000 Venture Blvd.608/365-3111 Wooster, OH 44691FAX: 800/927-8578E-mail: FAX: 800/649-2737Web:E-mail:OLYMPIC RUBBER ROOFING SYSTEM 638 SIPLAST INC. 650P.O. box 0910821111 Hwy. 67 SouthMilwaukee, WI 53209 Arkadelphia, AR 71923800/552-5393 or 414/442-3117 870/246-8094FAX: FAX: 800/649-2737E-mail:E-mail: kersey@siplast.comWeb:Web:PERFORMANCE ROOF SYSTEMS 638 SOPREMA, INC. 6524821 Chelsea Avenue 310 Quadral DriveKansas City, MO 64130 Wadsworth, OH 44281816/921-0221 330/334-0066 or 800/356-3521FAX: 816/921-5540 FAX: 330/334-4289E-mail: prshunt@aol.comE-mail:Web:Web:PROTECTIVE COATINGS INC. 642 SOUTHWESTERN PETROLEUM CORP. 6521620 Birchwood Avenue 534 North Main Street, P.O. Box 961005Fort Wayne, IN 46803 Ft. Worth, TX 76161-0005800/992-8299 817/332-2336 or 800/877-9372FAX: 219/422-7147 FAX: 817/877-4047E-mail:E-mail: swepcousa.comWeb:Web:REPUBLIC POWDERED METALS 642 TAMKO ROOFING PRODUCTS, INC. 6543735 Green Road 220 W. 4th St., P.O. Box 1404Beachwood, OH 44122 Joplin, MO 64802800/551-7081 417/624-6644FAX: 888/742-1759 FAX: 417/624-2340E-mail:E-mail:Web:Web: www.tamko.com567

<strong>Index</strong> to WarrantiesWarrantyWarrantyTEXAS REFINERY CORP. 660 U.S. INTEC INC. 662One Refinery Place, P.O. Box 711 P.O. Box 2845Ft. Worth, TX 76101 Port Arthur, TX 77643817/332-1161 800/624-6832 (Tech Hotline)FAX: 817/332-2340800/231-4631 (US)E-mail:800/392-4216 (TX)Web: www.texasrefinery.comTREMCO INC. 660 VERSICO INC. 6643735 Green Road 3485 Fortuna DriveP.O. Box 228069 Akron, OH 44312Beachwood, OH 44122-8069 216/644-6700 or 800/992-7663216/292-5000 FAX: 216/644-2613FAX: 216/292-5629E-mail:Web: www.tremcoroofing.comWeb:UNIROOF W.P. HICKMAN SYSTEMS INC. 664P.O. Box 18013330700 Solon Industrial ParkwayAltamonte Springs, FL 32716-0133 Solon, OH 44139407/869-5100 440/248-7780FAX: FAX: 440/248-6524E-mail:E-mail: wphickman@wphickman.comWeb:Web:568

THIS PAGE LEFT BLANK INTENTIONALLY569

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity AlliedSignal, Inc. AlliedSignal, Inc. AlliedSignal, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑBlack Armor NDL <strong>Roofing</strong> System Warranty≅; April 1990; 004590 ΑPRMA NDL <strong>Roofing</strong> System Warranty≅; February 1991 ΑRoof Materials 10-Year Limited Warranty≅; 1987; GOES 681Built-up roofing specifications: RP-40, RP-41, RP-50TC, RP51-TC, RP-40-5, RP-41-5, RP-60, RP-61, RP-60-5, RP-61-5 (SeeSpecial Features/Conditions.)4. Scope of coverage Material and workmanship; Allied-Signal warrants that it will at itsexpense repair or cause to be repaired the roofing system to theextent necessary to return the roof system to a watertight conditiononly when leaks result from (1) defects in workmanship or ordinarywear and tear of the Black Armor Roof Membrane and theapproved base-flashing; (2) blisters, bare spots, fishmouth,wrinkles, ridges, and splits in the built-up roofing membrane notcaused by structural movement or failure or movement of anymaterial underlying the roof membrane or base flashing system;and (3) slippage of the built-up roofing membrane or base flashing.Deterioration of the membrane caused by standing water alone isnot excluded from this warranty. [AlliedSignal indicates that whenthe specification requires a Αprotected roof membrane assembly,≅an addendum is added to the warranty stating that warrantyincludes removal and replacement of the thermal overlay systemas required to repair a membrane leak.]Built-up roofing specifications RP-40, RP-41, RP-50TC, RP51-TC,RP-40-5, RP-41-5, RP-60, RP-61, RP-60-5, and RP-61-5.Material and workmanship; AlliedSignal warrants that it will, at itsexpense, repair or cause to be repaired the roofing system to theextent necessary to return it to a watertight condition and/or thePRMA insulation overlay system to its original installedconfiguration with no more than a 10 percent variation from itsoriginal published thermal resistance value only when leaks resultfrom (1) defects in workmanship or ordinary wear and tear of theBlack Armor Membrane and the approved base flashing; (2)blisters, bare spots, fishmouth, wrinkles, ridges, and splits in thebuilt-up roofing membrane not caused by structural movement orfailure or movement of any material underlying the roof membraneor base flashing system; and (3) slippage of the built-up roofingmembrane or base flashing. Deterioration of the membrane causedby standing water alone is not excluded from this warranty.Built-up roofing specifications: RP-40, RP-41, RP-50TC, RP51-TC,RP-40-5, RP-41-5, RP-60, RP-61, RP-60-5, RP-61-5Material only; AlliedSignal Corporation warrants that its coal tarpitch and coal tar saturated felt, when used together in a roofmembrane system, meet or exceed all of its publishedspecifications in effect on the date of sale and will not vary beyondthe specified values, except for normal exposure and wear andtear.5. Length of coverage 5, 10, 15, 20, or 25 years: BUR Specs: RP-40, RP-41, RP-50TC,RP51-TC, RP-40-5, RP-41-5, RP-60, RP-61, RP-60-5, RP-61-5with Flashing Spec BS-250; 5-and 10-year coverage available forall BUR specifications with Flashing Spec BS 210. A Αprotectedroof membrane assembly≅ can be warranted up to 20 years5 or 10 years: All BUR specs with flashing spec BS-210; 5, 10, 15,or 20 years: all BUR specs with flashing spec BS-25010 years6. Nature of remedy AlliedSignal will at its expense, take appropriate action, asnecessary, to return the roofing system to a watertight condition.AlliedSignal will, at its expense, take appropriate action, asnecessary, to return the roofing system to a watertight condition.If tests confirm that Allied products do not meet publishedspecifications, adjusted for normal exposure and wear and tear, thecosts of such tests shall be paid by Allied and Allied shallreimburse owner the original purchase price of the defectiveproducts, prorated by year over the ten-year period of the warranty.7. Monetary limitations None stated. None stated. Prorated of purchase price of defective materials8. Notification requirements Written notification upon discovery of a leak to AlliedSignal Inc.Commercial <strong>Roofing</strong> Systems, 2000 Regency Parkway, Suite 255Cary, NC 27511-8507. (See Special Features/Conditions.)9. Exclusive or additional remedy AlliedSignal shall not be liable for any damages based uponnegligence, breach of warranty, strict liability, or any other theory ofliability other than exclusive liability set forth in warranty; excludesUCC warranties.Written notification upon discovery of a leak to AlliedSignal, Inc.,Black Armor Coal Tar <strong>Roofing</strong> Systems, 2000 Regency Parkway,Suite 255, Cary, NC 27511-8507. (See Special Features/Conditions.)AlliedSignal shall not be liable for any damages based uponnegligence, breach of warranty, strict liability, or any other theory ofliability other than exclusive liability set forth in warranty; excludesUCC warranties.Written notification within 30 days to Allied if the owner believesthat Allied products no longer meet published specifications,adjusted for normal exposure and wear and tear. Warrantyregistration form must be completed, executed on behalf of owner,and mailed to Allied.If warranty fails of its essential purpose, the owner's exclusiveremedy shall be refund of purchase price of defective products.Warranty provides that buyer agrees that Allied has no liability forany consequential, incidental, special, or punitive damages arisingfrom breach of warranty, breach of contract, negligence, strictliability, or otherwise; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoAlliedSignal's determination AlliedSignal's determination Owner takes samples, at his expense, of products in presence ofAllied representative and submits samples to independent testinglaboratory approved by Allied. Laboratory conducts tests accordingto appropriate ASTM procedures. Its findings are final and bindingon all parties.12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 9, 10, 22. Warranty also excludes failure of ownerto make repairs not covered under warranty.1, 2, 3, 4, 6, 7, 9, 10, 15, 22. Warranty also excludes failure ofowner to make repairs not covered under warranty.None listed; material-only warranty13. Wind coverage/exclusions Warranty covers damage caused by winds up to gale force. Warranty covers roof damage caused by winds up to gale force. No coverage for damage caused by wind.

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)M, R (See Special Features/Conditions.) M, R (See Special Features/Conditions.) I, R15. Cost to obtain 5 years: $8.00/square; 10 years: $10.00/square; 15 years: $12.00/-sq; 20 years: $15.00/sq, 25 years: $20.00/sq16. Minimum charge 5 years: $700; 10 years: $800; 15 years: $900; 20 years: $1,000;20 years $1,5005 years: $8.00/square; 10 years: $10.00/square; 15 years:$12.00/square; 20 years: $15.00/squareNone5 years: $700; 10 years: $800; 15 years: $900; 20 years: $1,000 None17. Ineligible structure or building use Cold-storage and freezer roofs; private residences Cold-storage and freezer roofs, private residences None18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsContractor required to submit request for warranty not less than 14days prior to date of project start to regional or home office forapproval, along with minimum warranty charge.Contractor required to submit request for warranty not less than 14days prior to date of project start to regional or home office forapproval, along with minimum warranty charge.Yes Yes No20. Job inspection policy Independent field auditor typically makes on-site inspections priorto, during (depending on length of coverage), and after application,as well as two years after issuance of warranty; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionContractor obligated to repair workmanship deficiencies for twoyears.Independent field auditor typically makes on-site inspections priorto (depending on length of coverage), and after application, as wellas two years after issuance of warranty; no charge.None; material-only warrantyContractor to provide notice prior to commencement of installation;no approval required.No on-site inspectionsNone; material-only warrantyNo; AlliedSignal indicates that it is self-insured. No; AlliedSignal indicates that it is self-insured. No; AlliedSignal indicates that it is self-insured.AlliedSignal Inc. manufactures and sells product AlliedSignal, Inc. manufactures and sells product. AlliedSignal Inc. manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability Warranty may be transferred to a subsequent owner only if: (1)building owner provides written notification of any transfer ofownership to AlliedSignal Inc., Tar Products, P.O. Box 1053R,Morristown, NJ 07962 within 30 days of such transfer; (2) anyrepairs required by AlliedSignal Inc. after an inspection of the roofare made; and (3) owner pays to AlliedSignal Inc. the then-currentpublished warranty transfer fee.No restrictions stated.Warranty is not transferable to any other party, including anysubsequent building owners.26. Special features/conditions If roofing system utilizes insulation, insulation must be supplied orapproved by AlliedSignal. If emergency conditions exist andimmediate temporary repairs are required to avoid buildingdamage, AlliedSignal Inc. will reimburse the owner for reasonablerepair expenses that would have otherwise been AlliedSignal Inc.'sresponsibility but for the emergency condition. If the roofing systemexperiences reoccurring leaks (more than two in a given roof area)during a twelve-month period, the owner may request AlliedSignalto inspect the affected roof area and AlliedSignal technical servicesrepresentative will make an inspection. AlliedSignal willfollow the recommendations of its technical services department asto the appropriate remedy for the problem or, if the leaks are notthe responsibility of AlliedSignal under the terms of the warranty,AlliedSignal will advise owner of repairs required to make roofmembrane watertight and the cost of such repairs will be theresponsiility of the owner. Warranty shall be governed by the lawsof the state of New Jersey.If emergency conditions exist and immediate temporary repairs arerequired to avoid building damage, AlliedSignal, Inc. will reimbursethe owner for reasonable repair expenses that would haveotherwise been AlliedSignal, Inc.'s responsibility but for theemergency condition. If the roofing system experiences reoccurringleaks (more than two in a given roof area) during a twelve-monthperiod, the owner may request AlliedSignal to inspect the affectedroof area, and AlliedSignal technical services representative willmake an inspection. AlliedSignal will follow the recommendationsof its technical services department as to the appropriate remedyfor the problem or, if the leaks are not the responsibility ofAlliedSignal under the terms of the warranty, AlliedSignal willadvise owner of repairs required to make roof membrane watertightand the cost of such repairs will be the responsibility of the owner.In the event of a reported diminution in the thermal resistance(R-value) of the overlay insulation, samples shall be taken underthe direction of AlliedSignal, Inc. and tested by a qualified laboratoryin accordance with ASTM Test Method C518-85. If it isdetermined that the thermal resistance (R-value) is more than 10percent below its original published value, AlliedSignal, Inc. shallpay all sampling and testing costs; otherwise, said costs shall bepaid by the building owner. Warranty shall be governed by thelaws of the state of New Jersey.Any action for breach of warranty shall be commenced within oneyear after the cause of action has accrued.27. Executed by owner No No Yes; warranty registration form must be signed on behalf of ownerand mailed to Allied.571

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity AlliedSignal, Inc. AlliedSignal, Inc. AlliedSignal, Inc.2. Title, original publication date, andidentifying symbol, if any"Millenniumϑ NDL <strong>Roofing</strong> System Warranty;" August 1994 “Infinitee NDL <strong>Roofing</strong> System Warranty;” March 1998 ΑBlack Armor Premier Series Warranty≅; March 1989; CS3. Product, specification, or systemcoveredMillenniumϑ - standard base, premium base, ST, SM, GTC, GMC Infinitee <strong>Roofing</strong> Systems Built-up <strong>Roofing</strong> Specifications: RP-41, RP51-TC, RP-61. If roofingsystem utilizes insulation, insulation must be supplied by Allied-Signal.Warranty requires use of Black Armor Pitch, Black Armor Felts, BlackArmor Base Flashings, and AlliedSignal roof insulations.4. Scope of coverage Material and workmanship; AlliedSignal warrants that it will at itsexpense repair or cause to be repaired the roofing system to the extentnecessary to return the roof system to a watertight condition only whenleaks result from (1) defects in workmanship or ordinary wear and tearof the Millennium roof membrane and the approved base-flashing; (2)blisters, bare spots, fishmouth wrinkles, ridges, and splits in the roofingmembrane not caused by structural movement or failure from movementof any material underlying the roof membrane or base flashing system;and (3) slippage of the roofing membrane or base flashing.Deterioration of the membrane caused by standing water alone is notexcluded from this warranty.Material and workmanship; AlliedSignal warrants that it will at itsexpense repair or cause to be repaired the roofing system to the extentnecessary to return the roof system to a watertight condition only whenleaks result from (1) defects in workmanship or ordinary wear and tear ofthe Infinitee roof membrane and the approved base-flashing; (2) blisters,bare spots, fishmouths, wrinkles, ridges, and splits in the roofingmembrane system not caused by structural movement or failures ormovement of any material underlying the roof membrane or baseflashing system; and (3) slippage of the roofing membrane or baseflashingMaterial and workmanship; AlliedSignal warrants that it will pay for allappropriate repairs to return the roofing system to a watertight conditiononly when leaks result from (1) defects in workmanship or ordinary wearand tear of the Black Armor <strong>Roofing</strong> Membrane and the approved baseflashing; (2) blisters, bare spots, fishmouths, wrinkles, ridges, and splitsin the built-up roofing membrane not caused by structural movement orfailure or movement of any material underlying the roof membrane orbase flashing systems; and (3) slippage of the built-up roofingmembrane or base flashing.5. Length of coverage 5 years: Millennium Specification Nos.: 100-C-N, 100-C-NN, 140-C-N,140-C-NN, 145-C-N, 145-C-NN, 150-C-N, 100-MP-N, 100-MP-NN, 120-MP-N, 120-MP-NN, 140-MP-N, 140-MP-NN, 145-MP-N, 145-MP-NN,150-MP-NN, 160-MP-N, 160-MP-NN10 years: Millennium Specification Nos.: 100-C-NN, 140-C-N, 140-C-NN, 145-C-N, 145-C-NN, 150-C-NN, 100-MP-NN, 120-MP-N, 120-MP-NN, 140-MP-N, 140-MP-NN, 145-MP-N, 145-MP-NN, 150-MP-NN, 160-MP-N, 160-MP-NN10 years: Millennium Specification Nos.: 100-C-NN, 140-C-N, 140-C-NN, 145-C-N, 145-C-NN, 150-C-NN, 100-MP-NN, 120-MP-N, 120-MP-NN, 140-MP-N, 140-MP-NN, 145-MP-N, 145-MP-NN, 150-MP-NN, 160-MP-N, 160-MP-NN15 years: Millennium Specification Nos.: 140-C-N, 140-C-NN, 145-C-N, 145-C-NN, 150-C-NN, 120-MP-N, 120-MP-NN, 140-MP-N, 140-MP-NN, 145-MP-N, 145-MP-NN, 150-MP-NN, 160-MP-N, 160-MP-NN20 years: Millennium Specification Nos.: 145-C-N, 145-C-NN, 150-C-NN, 120-MP-N, 120-MP-NN, 140-MP-N, 140-MP-NN, 145-MP-N, 145-MP-NN, 150-MP-NN, 160-MP-N, 160-MP-NN25 Years: Millennium Specification Nos.: 160-MP-N, 160-MP-NN5 years: Infinitee Specification Nos.: 100-MA-N, 100-MA-NN, 105-PM-N, 105-PM-NN, 120-MA-N, 120-MA-NN, 125-PM-N, 125-PM-NN, 130-MA-NN, 135-PM-NN, 140-MA-N, 140-MA-NN, 145-PM-N, 145-PM-NN,160-MA-N, 160-MA-NN, 165-PM-N, 165-PM-NN, 100-C-N, 100-C-NN,105-C-N, 105-C-NN, 140-C-N, 140-C-NN, 145-C-N, 145-C-NN, 150-C-N, 150-C-NN, 100-T-N, 140-T-N, 140-T-NN10 years: Infinitee Specification Nos.: 100-MA-NN, 105-PM-NN, 120-MA-N, 120-MA-NN, 125-PM-N, 125-PM-NN, 130-MA-NN, 135-PM-NN, 140-MA-N, 140-MA-NN, 145-PM-N, 145-PM-NN, 160-MA-N, 160-MA-NN, 165-PM-N, 165-PM-NN, 100-C-NN, 105-C-NN, 140-C-N, 140-C-NN, 145-C-N, 145-C-NN, 150-C-N, 150-C-NN, 140-T-N, 140-T-NN15 years: Infinitee Specification Nos.: 120-MA-N, 120-MA-NN, 125-PM-N,125-PM-NN, 130-MA-NN, 135-PM-NN, 140-MA-N, 140-MA-NN, 145-PM-N,145-PM-NN, 160-MA-N, 160-MA-NN, 165-PM-N, 165-PM-NN, 150-C-N,150-C-NN, 140-T-N, 140-T-NN20 years Infinitee Specification Nos.: 125-PM-N, 125-PM-NN, 135-PM-NN, 140-MA-NN, 145-PM-N, 145-PM-NN, 160-MA-N, 160-MA-NN, 165-PM-N, 165-PM-NN, 140-T-N, 140-T-NN25 years: Infinitee Specification Nos.: 165-PM-N, 165-PM-NN5 or 10 years: all BUR specs with flashing spec BS-210;5, 10, 15 or 20 years: all BUR specs with flashing spec BS-250;25 years: BUR specs RP-41, RP51-TC, and RP-61 with flashing specBS-2506. Nature of remedy AlliedSignal will, at its own expense, take appropriate action to returnthe roofing system to a watertight condition.AlliedSignal will at its expense, take appropriate action, as necessary, toreturn the roofing system to a watertight condition.AlliedSignal will take appropriate action to make the roofing systemwatertight.7. Monetary limitations None stated None stated Warranty states that there is no aggregate dollar limit to the cost ofany “appropriate repairs” over the term of this warranty. However,if a repair otherwise covered by warranty is not an “appropriaterepair,” owner's sole remedy and AlliedSignal's total remainingliability shall be payment to owner of “remaining roof value,” whichis prorated, based on years roof has been in service, and totalinstalled cost.8. Notification requirements Written notification upon discovery of a leak to AlliedSignal, Inc.Commercial <strong>Roofing</strong> Systems, 2000 Regency Parkway, Suite 255, Cary,NC 27511-8507.]9. Exclusive or additional remedy AlliedSignal shall not be liable for any damages which are based uponnegligence, breach of warranty, strict liability, or any other theory ofliability other than the exclusive liability set forth in warranty; excludesUCC warranties10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Written notification within 30 days to AlliedSignal Inc. Commercial<strong>Roofing</strong> Systems, 2000 Regency Parkway, Suite 255, Cary, NC 27511-8507AlliedSignal shall not be liable for any damages which arebased upon negligence, breach of warranty, strict liability, orany other theory of liability other than the exclusive liability setforth in warranty; excludes UCC warranties.No No NoAlliedSignal’s determination AlliedSignal’s determination Neutral (no provision)Written notification within 30 days after discovery of all leaks to AlliedSignalCommercial <strong>Roofing</strong> Systems, 2000 Regency Parkway, Suite 255, Cary, NC27511-8507AlliedSignal not liable for any damages based upon negligence,breach of warranty, strict liability, or any other theory of liabilityother than exclusive liability set forth in warranty; excludes UCCwarranties.1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 22. 1, 2, 3, 4, 5, 6, 9, 11, 13, 15, 22 1, 2, 3, 4, 6, 7, 9, 10, 15, 22. Warranty also excludes failure ofowner to make repairs not covered under warranty.

13. Wind coverage/exclusions AlliedSignal indicates warranty covers roof damage caused by winds upto gale force, Warranty excludes wind storms and gales. [A gale isdefined on the Beaufort Scale as winds between 39-46 mph.]AlliedSignal indicates warranty covers roof damage caused by winds upto gale force, Warranty excludes wind storms and gales. [A gale isdefined on the Beaufort Scale as winds between 39-46 mph.]Warranty excludes gales.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, M, R C, M. R R15. Cost to obtain 5 years: $3.50/square10 years: $5.00/square15 years: $7.50 square20 years: $12.50/square25 years: $20.00/square5 years: $ 3.50/square10 years: $ 5.00/square15 years: $ 7.50/square20 years: $12.50/square25 years: $20.00/square5 years: $ 8.00/square10 years : $10.00/square15 years: $12.00/square20 years: $15.00/square25 years: $20.00/square16. Minimum charge 5 years: $35010 years: $50015 years: $75020 years: $1,00025 years: $1,5005 years: $ 35010 years: $ 50015 years: $ 75020 years: $1,00025 years: $1,5005 years: $ 70010 years: $ 80015 years: $ 90020 years: $1,00025 years: $1,50017. Ineligible structure or building use Cold storage and freezer roofs; private residences Cold storage and freezer roofs; private residences Cold-storage or freezer roofs; private residences18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsContractor required to submit request for warranty not less than 14 daysprior to date of project start to home office for approval, along withminimum warranty charge.Contractor required to submit request for warranty not less than 14 daysprior to date of project start to home office for approval, along withminimum warranty charge.Yes Yes YesContractor required to submit request for warranty not less than 14 daysprior to date of project start to regional or home office for approval, alongwith minimum warranty charge.20. Job inspection policy Independent field auditor typically makes on-site inspections prior to or atjob start-up, during and after application ,as well as two years afterissuance of warranty; no charge.Independent field auditor typically makes on-site inspections prior to orat job start-up, and after application, as well as two years after issuanceof warranty; no chargeIndependent field auditor typically makes on-site inspections prior to,during, and/or after application, as well as two years after issuance ofwarranty; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionContractor obligated to repair all leaks, any defects and workmanshipdeficiencies for two years.Contractor obligated to repair all leaks, any defects and workmanshipdeficiencies for two years.No; AlliedSignal indicates that it is self-insured. No; AlliedSignal indicates that it is self-insured.Contractor obligated to repair workmanship deficiencies for two yearsand for longer than two years if it is found that roof was misapplied beyondwhat could be reasonably considered a minor infraction ofstandard practice, per terms of AlliedSignal authorized contractor'sagreement.No; AlliedSignal indicates that it is self-insured.AlliedSignal manufactures and sells product. AlliedSignal Inc. sells product only AlliedSignal, Inc. manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability No restrictions stated Warranty may be transferred to a subsequent owner only if: (1)owner provides written notification of any transfer of ownershipto AlliedSignal Commercial <strong>Roofing</strong> Systems, 2000 RegencyParkway, Suite 255, Cary, NC 27511-8507, within 30 days ofsuch transfer; (2) any repairs required by AlliedSignal after aninspection of the roof are made and properly performed; and (3)owner pays to AlliedSignal the then current published warrantytransfer fee.26. Special features/conditions If the roof system utilizes insulation, insulation must be supplied or approved byAlliedSignal. If emergency conditions exist and immediate temporary repairs arerequired to avoid building damage, AlliedSignal will reimburse the owner forreasonable repair expense that would have otherwise been AlliedSignal’sresponsibility but for the emergency condition.If the roofing system experiences recurring leaks (more than two in a given roofarea) during a twelve-month period, the owner may request AlliedSignal to inspectthe affected roof area, and AlliedSignal will follow the recommendations of itstechnical services department as to the appropriate remedy for the problem. Ifleaks are not the responsibility of AlliedSignal under the terms of the warranty,AlliedSignal will advise owner of repairs required to make roof membranewatertight and the cost of such repairs will be the responsibility of the owner.Warranty shall be governed by the laws of the state of New JerseyIf the roof system utilizes insulation, insulation must be supplied or approvedby AlliedSignal. If emergency conditions exist and immediate temporary repairsare required to avoid building damage, AlliedSignal will reimburse the owner forreasonable repair expense that would have otherwise been AlliedSignal’sresponsibility but for the emergency condition.If the roofing system experiences recurring leaks (more than two in a givenroof area) during a twelve-month period, the owner may request AlliedSignal toinspect the affected roof area, and AlliedSignal will follow the recommendationsof its technical services department as to the appropriate remedy for theproblem at its expense, including, but not limited to crediting the owner with theremaining value of roof based on service life received. If leaks are not theresponsibility of AlliedSignal under the terms of the warranty, AlliedSignal willadvise owner of repairs required to make roof membrane watertight and the costof such repairs will be the responsibility of the owner.Warranty shall be governed by the laws of the State of New Jersey27. Executed by owner No No NoWarranty may be transferred to a subsequent owner only if: (1) ownerprovides written notification of any transfer of ownership to AlliedSignalTar Products, P.O. Box 1053R, Morristown, NJ 07960, within 30 days ofsuch transfer; (2) any repairs required by AlliedSignal Inc. after an inspectionof the roof are made; and (3) owner pays to AlliedSignal Inc.the then-current published warranty transfer fee.5- and 10-year Premier Series warranties are available for retrofitapplications over an existing roof with prior approval by AlliedSignal.Warranty shall be governed by the laws of the state of New Jersey.573

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity AlliedSignal, Inc. American Lubricants Company The Barrett Company, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑBlack Armor Premier Series Warranty≅; March 1989; MFS ΑTiffany Division Limited Material Warranty≅; November 1, 1989;10/89Built-up <strong>Roofing</strong> Specifications: RP-40, RP-41, RP-50TC, RP51-TC, RP-60, RP-61. Warranty requires use of Black Armor Pitch,Black Armor Felts, and Black Armor Base Flashing; no insulationrequirement.Tiffany Modified BitumenBarrett Company ΑRam-Tough Elastomeric Built Up Roof FiveYear Material Limited Warranty≅; 1986; DT 1249KLB-100-2F KLB-100-1MBKLB-100-2M, KLB-100-3F,KLB-100-2MBKLB-100-3M, KLB-100-4FKLB-100-4M, K-312-2FK-312-3, FK-312-4 F4. Scope of coverage Material and workmanship; AlliedSignal warrants that it will pay forall appropriate repairs to return the roofing system to a watertightcondition only when leaks result from (1) defects in workmanshipor ordinary wear and tear of the Black Armor <strong>Roofing</strong> Membraneand the approved base flashing; (2) blisters, bare spots, fishmouths,wrinkles, ridges, and splits in the built-up roofing membranenot caused by structural movement or failure or movement of anymaterial underlying the roof membrane or base flashing system;and (3) slippage of the built-up roofing membrane or base flashing.Material only; Tiffany Division warrants its products against leakswhen properly applied to all structures subject to normal usage.Tiffany does not warrant the application of the product. Applicationis solely the responsibility of the purchaser.Material only; Barrett warrants that the Ram Tough KLBelastomeric built-up roofing components sold by Barrett will be freefrom manufacturing defects at the time of delivery to the originalpurchaser and that the KLB component materials will notprematurely deteriorate to the point of failure because ofweathering, if properly installed, maintained and used for thepurpose Barrett intended, in accordance with Barrett publishedspecifications in effect at the time of sale.5. Length of coverage 5 or 10 years: All BUR specs with flashing spec BS-210; 5, 10, 15or 20 years: All BUR specs with flashing spec BS-250; 25 years:BUR specs RP-41, RP51-TC, and RP-61 with flashing specBS-2505 years: uncoated; 10 years: if coated at original installation withSilver-Bright Liquid-Aluminum Roof Coating, Tiff-A-Lume, granulesor gravel and re-coated after five years; 15 years: see conditionsfor renewal or extension.5 years6. Nature of remedy AlliedSignal will take appropriate action to make the roofingsystem watertight.If leak occurs within the warranty coverage, American Lubricantswill furnish, freight collect, sufficient additional materials of Tiffany'smanufacture to make necessary repairs for the duration of thewarranty.If the Barrett-supplied membrane components or bitumenevidences manufacturing defects, Barrett will, at its option, repair orreplace defective material at original FOB point. If the Barrett membranecomponents show premature deterioration, Barrett will, at itsoption, provide repair material for original membrane or will providecredit to be applied towards the purchase of new membranecomponents at the then current prices for the membrane.7. Monetary limitations Warranty states there is no aggregate dollar limit to the cost of anyΑappropriate repairs≅ over the term of this warranty. However, if arepair otherwise covered by warranty is not an Αappropriaterepair,≅ owner's sole remedy and AlliedSignal's total remainingliability shall be payment to owner of Αremaining roof value≅ whichis prorated based on years roof has been in service and total installedcost.Amount of adjustment material provided by American Lubricantswill in no case exceed the amount on the original purchase.Barrett's maximum liability shall be for the full value of the originalBarrett supplied material componentsΧonly purchase price. In caseof premature deterioration, maximum value allowed as credit shallnot exceed the original Barrett supplied components purchaseprice.8. Notification requirements Written notification within 30 days after discovery of all leaks toAlliedSignal Commercial <strong>Roofing</strong> Systems, 2000 RegencyParkway, Suite 255, Cary, NC 27511-85079. Exclusive or additional remedy AlliedSignal not liable for any damages based upon negligence,breach of warranty, strict liability, or any other theory of liabilityother than exclusive liability set forth in warranty; excludes UCCwarranties.None stated.Excludes UCC warrantiesNoneBarrett makes no other warranty or guarantee and is in lieu of allother obligations or liability; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoNeutral (no provision) Neutral (no provision) Barrett shall have sole and exclusive right of determination ofwarranty applicability.12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 9, 10, 15, 22. Warranty also excludes failure ofowner to make repairs not covered under warranty.1, 2, 3, 4, 6, 11, 13, 17, 18, 19, 20 1913. Wind coverage/exclusions Warranty excludes gales. No coverage for damage caused by wind No coverage for damage caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)R C, R I, O (See Special Features/Conditions.)

15. Cost to obtain 5 year: $6.00/square; 10 year: $7.00/square; 15 year: $8.00/-square; 20 year: $12.00/square; 25 year: $15.00/squareNoneNone16. Minimum charge 5 year: $700; 10 year: $800; 15 year: $900; 20 year: $1,000; 25year: $1,500NoneNone17. Ineligible structure or building use Cold-storage or freezer roofs; private residences Cold-storage buildings, heated tanks, roofs without positivedrainage, Double T or prestressed T prefabricated concrete; privateresidences.Unusual or unique applications may require specificationmodifications or other special considerations.18. Pre-construction notice andapproval requirementsContractor required to submit request for warranty not less than 14days prior to date of project start to regional or home office forapproval, along with minimum warranty charge.Contractor required to submit roof record and signed warranty form.Contractor must file Barrett pre-construction form and intent towarrant application with Barrett prior to commencement ofinstallation.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Independent field auditor typically makes on-site inspections priorto, during, and after application, as well as two years afterissuance of warranty.;.No manufacturer inspections; contractor makes prejob inspection athis discretion.Barrett makes on-site inspections prior to, during, and aftercompletion, as well as two years after issuance of warranty, asrequired or deemed necessary; no charge.21. Contractor’s post-installationobligationContractor obligated to repair workmanship deficiencies for twoyears.None; material-only warrantyAlthough this is a material only warranty, contractor is obligated tomake repairs to all workman ship deficiencies for two years.22. Backed by named insurance orsuretyNo; AlliedSignal indicates that it is self-insuredNo; American Lubricants Company indicates that it does not carryinsurance covering its warranty obligations.No; Barrett indicates that it carries $1-million-per-occurrenceproducts liability insurance.23. Issuing entity manufacturesand/or sells productsAlliedSignal, Inc. manufactures and sells product. American Lubricants Company manufactures and sells product. Barrett manufactures some, but not all, components and sells theproducts as a complete system.24. Conditions for renewal orextensionNo renewal provision15-year warranty is in effect providing Silver Bright Aluminum RoofCoating is applied 30 days after installation and at 5-year intervalsthereafter.No renewal provision25. Assignability Warranty may be transferred to a subsequent owner only if: (1)building owner provides written notification of any transfer ofownership to AlliedSignal, Inc. Black Armor Coal Tar <strong>Roofing</strong> Systems,P.O.Box 1053R, Morristown, NJ 07962, within 30 days ofsuch transfer; (2) any repairs required by AlliedSignal, Inc. after aninspection of the roof are made; and (3) owner pays to AlliedSignal,Inc. the then-current published warranty transfer fee.No restrictions stated.No restrictions stated.26. Special features/conditions 5- and 10-year Premier Series warranties are available for retrofitapplications over an existing roof with prior approval byAlliedSignal. Warranty shall be governed by the laws of the stateof New Jersey.If purchaser does not accept delivery of the products supplied byBarrett for the purpose of work indicated, the products are to bereturned forth with, unopened. Should the owner fail to properlyexecute and return a signed copy of warranty within 90 days ofissuance, warranty shall be null and void in its entirety and anyproducts sold shall become a materials-only sale without anywarranty or guarantee as expressly provided for on Barrett invoicesand terms of sale.27. Executed by owner No Yes Yes575

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity The Barrett Company, Inc. The Barrett Company, Inc. The Barrett Company, Inc.2. Title, original publication date, andidentifying symbol, if anyBarrett Company ΑRam-Tough Elastomeric Built-up RoofLimited Warranty≅; 1986; DT 1247Barrett Company ΑRam-Tough Elastomeric Built-Up RoofMaterial Components Ten Year Limited Warranty≅; 1986; DT1248Barrett ΑProtected Membrane Roof Limited Warranty≅; 1984;19843. Product, specification, or systemcoveredKLB-100-1PG, KLB-100-2FKLB-100-2MB, KLB-100--2PGKLB-100-3FK-312-2F, KLB-100-3PGKLB-100-4FK-312-3F, KLB-100-4PGKLB-100-2MK-312-4F, KLB-100-2-PKLB-100-3MK-312-2P, KLB-100-3PKLB-100-4MK-312-3P,KLB-100-4PKLB-100-1MBK-312-4PKLB-100-1 PG, KLB-100-2 PG, KLB-100-3 PG, KLB-100-4 PG,KLB-100-2P, KLB-100-3 P,KLB-100-4 P, K-312-2 P, K-312-3P, K-312-4 PRam-Tough TM-500; Ram-Tough KLB Specifications KLB 3-F;KLB 3P; KLB 3-M; KLB 4PG; KLB 4F; KLB 4P; KLB 4M; KLB4HS4. Scope of coverage Material and workmanship; Barrett warrants that the BarrettRam-Tough Membrane Components will remain in awatertight condition.Material only; Barrett warrants that the Ram-Tough KLBelastomeric built-up roofing components sold by Barrett will befree from manufacturing defects at the time of delivery to theoriginal purchaser and that the KLB component materials willnot prematurely deteriorate to the point of failure because ofweathering, if properly installed, maintained, and used for thepurpose Barrett intended, in accordance with Barrett publishedspecifications in effect at the time of sale.Material and workmanship; Barrett warrants that its BarrettRam-Tough Roof Membrane will remain in a watertightcondition and will not fail to function due to workmanship ordefective product.5. Length of coverage 5, 8, 10, 12, 15, 20, or 25 years, depending on specificationused6. Nature of remedy In the event of failure of the product to function as warranted,whether caused by workmanship or defective product, Barrettwill make or cause to be made such repairs and maintenancenecessary to enable the product to perform as warranted, exceptfor the removal and replacement of any materialscovering the system.10 years 10 and 20 yearsIf the Barrett-supplied membrane components or bitumenevidences manufacturing defects, Barrett will, at its option,repair or replace defective material at original F.O.B. point. Ifthe Barrett membrane components show prematuredeterioration, Barrett will, at its option, provide repair materialfor original membrane or will provide credit to be appliedtowards the purchase of new membrane components at thethen current prices for the membrane.Barrett will make or cause to be made such repairs andmaintenance necessary to enable the Ram-Tough RoofMembrane to perform as warranted, except for the removal andreplacement of any materials covering the waterproofmembrane.7. Monetary limitations Barrett's repair obligations over the life of the warranty arelimited to the owner's original cost of product.For the first five years from date of completion, Barrett'smaximum liability shall be for the full value of the originalBarrett-supplied material componentsΧonly purchase price.Thereafter, Barrett's liability shall be reduced by 20 percent ofthe original warranty value each successive year until warrantyexpiration. In the case of premature deterioration, themaximum value allowed for credit shall not exceed the originalpurchase price.Barrett's repair obligations over the life of the warranty arelimited to the owner's original cost of the Barrett Ram-ToughRoof Membrane.8. Notification requirements Prompt notification and confirmation, in writing, sent byregistered or certified mail of any failure of the product within30 days following such failure.NoneWritten notification within 30 days of any failure covered by thewarranty.9. Exclusive or additional remedy Owner's sole and exclusive remedy; Barrett not liable orobligated for any loss or damage based on breach of warrantyor negligence; excludes UCC warranties.Barrett makes no other warranty or guarantee and is in lieu ofall other obligations or liability; excludes UCC warranties.Excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoBarrett shall have the sole and exclusive right of good faithdetermination of warranty applicability.Barrett shall have sole and exclusive right of determination ofwarranty applicability.Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 8, 12, 16, 18 19 1, 2, 4, 6, 7, 8, 12, 1613. Wind coverage/exclusions Warranty excludes high winds, gales, hurricanes, andtornadoes. [Barrett indicates that coverage of wind speeds isup to 72 miles per hour.]Warranty covers roof damage caused by wind speeds up to 72miles per hour.Warranty excludes high winds, gales, hurricanes, andtornadoes. [Barrett indicates that warranty covers roof damagefrom wind speeds up to 72 miles per hour.]

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, H, I, R I, O (See Special Features/Conditions.) B, C, H, R15. Cost to obtain $5.00/square $2.00/square $5.00/square16. Minimum charge $500 $250 $50017. Ineligible structure or building use Unusual or unique applications may require specificationmodifications or other special considerations.Unusual or unique applications may require specificationmodifications or other special considerations.Unusual installations are subject to technical review andapproval.18. Pre-construction notice andapproval requirementsContractor must file Barrett pre-construction form and intent towarrant application with Barrett prior to commencement ofinstallation.Contractor must file Barrett pre-construction form and intent towarrant application with Barrett prior to commencement ofinstallation.Contractor must submit request form with pertinent informationprior to job start.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Barrett makes on-site job inspections prior to, during and aftercompletion, as well as two years after issuance of warranty asrequired or deemed necessary; no charge.Barrett makes on-site inspections prior to, during and aftercompletion, as well as two years after issuance of warranty asrequired or deemed necessary; no charge.Barrett technical representative makes on-site inspectionsprior, during, and after application, as well as two years aftercompletion depending on job conditions; no charge.21. Contractor’s post-installationobligationContractor obligated to make repairs to workmanshipdeficiencies for two years.Although this is a material only warranty, contractor is obligatedto make repairs to all workmanship deficiencies for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; Barrett indicates that it carries $1-million-per-occurrenceproducts liability insurance.No; Barrett indicates it carries $1-million-per-occurrenceproducts liability insurance.Surety not named on warranty; Barrett indicates it hasinsurance coverage of $1 million per occurrence.23. Issuing entity manufactures and/orsells productsBarrett manufactures some, but not all, components and sellsthe products as a complete system.Barrett manufactures some, but not all, components and sellsthe products as a complete system.Barrett manufactures and sells some products and only sellssome products.24. Conditions for renewal orextensionNo renewable provision No renewal provision No renewal provision25. Assignability Not assignable No restrictions stated Not assignable26. Special features/conditions No representative of Barrett has authority to make anyrepresentation or promises except as stated on warranty.Should the owner fail to properly execute and return a signedcopy of warranty within 90 days of issuance, warranty shall benull and void in its entirety and any products sold shall becomea materials-only sale without warranty or guarantee asexpressly provided for on Barrett invoices and terms of sale.If purchaser does not accept delivery of the products suppliedby Barrett for the purpose of work indicated, the products are tobe returned forth with, unopened. Should the owner fail toproperly execute and return a signed copy of warranty within 90days of issuance, warranty shall be null and void in its entiretyand any products sold become a materials-only sale withoutany warranty or guarantee as expressly provided for on Barrettinvoices and terms of sale.27. Executed by owner Yes Yes No577

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity The Barrett Company, Inc. Bitec, Inc. Bitec, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredBarrett Company ΑRam-Tough Platinum System Warranty≅; 1986;DT 1246KLB-100-3PG-PMR, K-312-3P-PMR, KLB-100-4PG--PMRK-312-4P-PMR, KLB-100-3P-PMRK-312-4F-PMR,KLB-100-4P-PMR, KLB-100-4F-PMR4. Scope of coverage Material and workmanship; Barrett warrants that the BarrettRam-Tough Membrane Components will remain in a watertightcondition and that the Foamular extruded polystyrene insulationmaterial will retain at least 80 percent of its thermal resistance andthat the ballast will remain on the roof.ΑLimited Ten-Year Material Warranty≅; June 1986; (F-203-1/89) Limited ΑInsured≅ <strong>Roofing</strong> Warranty; June 1987All Bitec modified bitumen membranesMaterial only; Bitec, Inc. warrants that the manufactured modifiedbitumen waterproofing roofing product, at the time of installation,conforms toBitec's published specifications, provided that the membrane hasbeen stored, handled, and that the installation meets or exceedsthe published use,and is installed in accordance with governingindustry standards, the Bitec product will be freeof manufacturing defects and will remain free.All Bitec modified bitumen membranesMaterial only, first two years; material and workmanship for balanceof warranty. Bitec warrants that the roofing installation will be freeof defects in material and workmanship that cause it to leak. Duringthe first two years, Bitec will be responsible only for defects inmaterial only. During remaining years, Bitec will pay cost to repairleaks caused by ordinary wear and tear. (See Special Features/Conditions.)5. Length of coverage 10, 15, 20, or 25 years, depending upon specification used 10 years 10 years: APS4T.1, APS4T.2, APM4T.1, APM4T.2, SPM4.5T.1,SPM4.5T.2, SPM3.5H.1, SPM3.5H.2, SPM4H.1, SPM4H.2,SPS3H.1, SPS3H.2, SFM3.5H.1, SFM3.5H.2, SFM3.5HFR.1,SFM3.5HFR.2; 15 years: APS4T.1.15, APS4T.2.15, APM4T.1.15,APM4T.2.15, SPM4.5T.1.15, SPM4.5T.2.15, SPM3.5H.1.15,SPM3.5H.2.15, SPM4H.1.15, SPM4H.2.15, SPS3H.1.15,SPS3H.2.15, SFM3.5H.1.15, SFM3.5H.2.15, SFM3.5HFR.1.15,SFM3.5HFR.2.15; 20 years: APS4T.1.20, APS4T.2.20,APM4T.1.20, APM4T.2.20, SPM4.5T.1.20, SPM4.5T.2.20, SPM3-.5H.1.20, SPM3.5H.2.20, SPM4H.1.20, SPM4H.2.20, SPM3H.1.20,SPS3H.2.20, SFM3.5H.1.20, SFM3.5H.2.20, SFM3.5HFR.1.20,SFM3.5HFR.2.206. Nature of remedy In the event of failure of the product to function as warranted,Barrett will make or cause to be made such repairs andmaintenance necessary to enable the product to perform aswarranted, except for the removal and replacement of anymaterials covering the system.If manufacturing defects cause the membrane to lose its watertightintegrity, Bitec, at its sole option, will refund to the owner a portionof the original purchase cost of the membrane or replace a portionof the membrane.After the first two years, Bitec will pay the cost of repairs to correctroof water leaks that are caused by ordinary wear and tear.7. Monetary limitations Barrett's repair obligations over the life of this warranty are limitedto the owner's original cost of the product.Bitec's liability limited to refunding to owner a portion of themembrane's original cost, or replacing a portion of the membraneaccording to a pro-rated scheduled, reduced 10 percent per year,ranging from 100 per-cent in years 1 and 2 to 10 percent in year 10.Bitec's obligations limited to the amount of the original cost of laborand material for installation of the defective membrane.8. Notification requirements Written notification within 30 days following any failure of theproduct covered by the warranty.Notification of any manufacturing defect must be submitted toBitec's general offices within five days after discovery of any suchdefect and include cert-ificate number. (See Special Features/Conditions.)Claims must be directed to Bitec, Inc., P.O. Box 497, Morrilton, AR72110, must be received within 72 hours of the original occurrence,and must be confirmed in writing and received by Bitec within tendays of the occurrence.9. Exclusive or additional remedy Owner's sole and exclusive remedy; Barrett not liable or obligatedfor any loss or damage based on breach of warranty or negligence;excludes UCC warranties.Owner's sole and exclusive remedy. Owner shallnot be entitled to additional remedies; owner expressly waives anyand all other claims fordamages, being direct or indirect, consequential or incidental,including but not expressly limited to the following: propertydamage, personal injury, dam-age to the owner or third parties,and/or loss of business or profit; excludes UCC warranties.Owner's sole and exclusive right and remedy and Bitec, Inc.'s soleobligation for any failure of the roofing installation or material;excludes UCC warranties.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicabilityBarrett shall have the sole and exclusive right of good faithdetermination of warranty applicability.Neutral (no provision)Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 8, 12, 16, 18 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including ionized radiation orcontamination from any hazardous substance or waste), 15, 16, 23.Warranty also specifically excludes damage caused by food.1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including ionized radiation orcontamination), 15, 16, 23. Warranty also specifically excludesdamage caused by food, birds, vermin, rodents, insects, or anyother animal or pest.

13. Wind coverage/exclusions Warranty excludes gales, windstorms with gust wind speeds inexcess of 70 mph, hurricanes, and tornadoes. [Barrett indicatesthat warranty covers roof damage resulting from wind speeds up to70 miles per hour.]No coverage for damage caused by windNo coverage for damage caused by wind14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, H, I, R I, L B, C15. Cost to obtain $10.00/square None 10 years: no charge for coated membrane; $3.00/square foruncoated membranes; 15 years: $4.00/square; 20 years:$5.00/square16. Minimum charge $500 None 10 years: $300; 15 years: $400; 20 years: $50017. Ineligible structure or building use Unusual or unique applications may require specificationmodifications or other special considerations.Roofs installed over cold storage or freezer compartments.Cold storage, freezer compartments, residences, apartmentbuildings, and condominiums18. Pre-construction notice andapproval requirementsContractor must file Barrett pre-construction form and intent towarrant application with Barrett prior to commencement ofinstallation.None requiredContractor required to give notice and obtain approval at least14 days before project is started.19. Approved, authorized, or licensedrequirementsYes No Yes20. Job inspection policy Barrett makes on-site job inspections prior to, during, and aftercompletion, as well as two years after issuance of warranty, asrequired or deemed necessary; no charge.No on-site inspectionsBitec field technical representative makes on-site jobinspections prior to, during, and after completion prior toissuance of warranty; no charge. Per diem cost for extrainspection.21. Contractor’s post-installationobligationContractor obligated to make repairs to all workmanshipdeficiencies for two years.NoneContractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextensionNo; Barrett indicates that it carries $1-million-per-occurrenceproducts liability insurance.Barrett manufactures some, but not all, components and sellsthe products as a complete system.No; Bitec indicates that it does not carry insurance covering itswarranty obligations.Bitec, Inc. manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability Not assignable Warranty is transferable or assignable only with the priorwritten approval of Bitec's manager of technical services, andpayment of applicable transfer fee, which includes inspectionfee and travel expenses.26. Special features/conditions No representative of Barrett has authority to make anyrepresentation or promises except as stated on warranty.Should the owner fail to properly execute and return a signedcopy of warranty within 90 days of issuance date, the warrantyshall be null and void in its entirety and any products sold shallbecome a materials-only sale without warranty or guaranteeas expressly provided for on Barrett Invoices and Terms ofSale.For warranty to be validated, registration form must becompleted and mailed to Bitec's offices, P.O. Box 497,Morrilton, AR 72110, within 30 daysafter job completion.No; Bitec indicates that it does not carry insurance covering itswarranty obligations.Bitec, Inc. manufactures and sells product.Not assignableOwner agrees that the Bitec authorized roofing contractor shallbe solely responsible for any and all costs to repair or correctany and all water leaks caused by defective workmanship orinstallation for two years, and Bitec shall be held harmlessagainst any and all claims arising from workmanship orinstallation during the first two years.27. Executed by owner Yes Owner signs Bitec registration form. No579

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Bitec, Inc. Bondcote Corp.2. Title, original publication date, andidentifying symbol, if any"Mineral Design Limited Warranty"; January 1997; Form MDW- 12/96BondCote <strong>Roofing</strong> Systems ΑStandard Warranty≅; Feb. 1,1993Burke Rubber Company, adivision of Burke IndustriesBurkeline <strong>Roofing</strong> Systems Warranty for CommercialBuilding≅; April 1988; BR003223. Product, specification, or systemcoveredMineral Design MDA or MD5 BondCote Single Ply <strong>Roofing</strong> Systems CSPE Hypalon CSPE Hypalon4. Scope of coverage Material only; Bitec warrants that the Mineral Designmembrane will be free from manufacturing defects whichresult in leaks. Warranty covers the Bitec Mineral Designmembrane only when installed on slope of 3:12 or greater.Material and workmanship; BondCote <strong>Roofing</strong> Systems willrepair leaks caused by defects in the roofing systemmanufactured or supplied by it and installed by an authorizedBondCote dealer/installer.Material and workmanship; Burke warrants that Burke willcause to be repaired leaks in Burkeline <strong>Roofing</strong> Systemcaused by defects in roofing system's material or workmanshipof the Burke authorized roofing applicator.5. Length of coverage 25 years 10 years; 15 years, only for new construction or tear-offapplications using certain insulations5 or 10 years (See Conditions for Renewal or Extension.)6. Nature of remedy Bitec will make repairs or cause repairs to be made or willreplace the Mineral Design membrane (exclusive of all otherroofing components) as required to prevent leaks resultingdirectly from and solely from manufacturing defects. Extent ofrepair or replacement is at sole discretion of Bitec.7. Monetary limitations Bitec's maximum liability is limited to the original cost of theMineral Design membrane when purchased, and thereasonable repair or replacement cost of the membrane. Afterthe first year, Bitec's maximum liability is the original cost ofthe Mineral Design membrane reduced by 4% per year.8. Notification requirements Owner must notify Bitec by certified mail at P.O. Box 497,Morrilton, AR, 72110 within 30 days of the alleged discovery ofleaks allegedly to have been caused by manufacturingdefects. (See Special Features/Conditions)9. Exclusive or additional remedy Warranty is expressly in lieu of any other obligations,warranties and guarantees, or liability on the part of Bitec;excludes UCC warranties.BondCote <strong>Roofing</strong> Systems will provide owner with repair tocorrect any leaks caused by defects in the manufacture orinstallation of roofing materials supplied by BondCote <strong>Roofing</strong>Systems.BondCote's cost not to exceed the owner's original installedcost of materials supplied by BondCote <strong>Roofing</strong> Systems.Written notification to BondCote <strong>Roofing</strong> Systems, 984Southford Road, Middlebury, CT, 06762, within 30 days afterleaks are discovered or should have been discoveredWarranty is expressly agreed to be an exclusive warranty;warranty is in lieu of any other remedy and all other warrantieswhether arising under contract, tort, negligence, productliability, or any other action; excludes UCC warranties.Burke will cause to be repaired leaks in the Burkeline <strong>Roofing</strong>SystemBurke's liability not to exceed owner's original cost of theinstalled roof over the life of warrantyWritten notice within 30 days of discovery of any leaksWarranty excludes all other warranties; Burke not liable for anyother damages resulting from the use of the roofing system orcaused by any defect, failure, or malfunction of the roofingsystem whether a claim is based upon warranty, contract,negligence, or otherwise; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoBitec's determination BondCote's good-faith determination Burke's determination; Burke's sole judgment whetherexclusions apply12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including ionizedradiation or contamination from any hazardous substance orwaste.1, 2, 3, 4, 6, 8, 12, 16 1, 3, 4, 5, 7, 1813. Wind coverage/exclusions Warranty covers wind speeds up to 60 mph for five years afterinitial application if the Mineral Design membrane has beeninstalled in accordance with published installationrequirements and leaks occur. Warranty excludes gales,windstorms, hurricanes and tornadoes.Warranty excludes wind equal to or exceeding strong gale,hurricanes, and tornadoes. Warranty covers roof damageresulting from wind speeds up to 46 miles per hour.Warranty excludes winds of peak gust speeds of __ mphmeasured 35 feet above the ground, hurricanes, andtornadoes. Burke indicates that warranty covers roof damageresulting from wind speeds up to 60 miles per hour14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)I, L C, I B, C, F, G15. Cost to obtain None 5 years: $6.00/square; 10 years: $8.00/square16. Minimum charge 5 years: $800; 10 years: $600

17. Ineligible structure or building use Roof installed over cold storage or freezer compartments. Residential buildings; there may be other buildings with specialrequirements.18. Pre-construction notice andapproval requirementsNone required.Contractor must complete project approval form and forward toBondCote <strong>Roofing</strong> Systems for approval prior to job start.Contractor must provide roof layout plan and all details toBurke prior to job start; Burke approval required.19. Approved, authorized, or licensedrequirementsNo Yes Yes20. Job inspection policy No on-site inspections. BondCote technical field representative makes inspectionsafter completion prior to issuing warranty; BondCote willinspect prior to and during application for Αnew contractors≅and on large or difficult installations.Burke field service employees make inspection prior to, during,and after application prior to issuance of warranty as well astwo years later; $350/day charge plus expenses for re-inspectionsonly.21. Contractor’s post-installationobligationNone; material-only warranty.Contractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor oblibated to make repairs to all leaks and materialsand workmanship for two years.22. Backed by named insurance orsuretyNo; Bitec indicates that it does not carry insurance covering itswarranty obligations.No; BondCote indicates that it does not carry insurancecovering its warranty obligations.No; Burke indicates it does carry insurance that covers itswarranty obligations.23. Issuing entity manufacturesand/or sells productsBitec manufactures and sells the product.BondCote <strong>Roofing</strong> Systems manufactures and sells theproduct.Burke manufactures and sells product.24. Conditions for renewal orextensionNo renewal provision.NoneWarranty may be extended for five years. If owner notifiesBurke at the time of issuance of original warranty of intent toseek an extension, there is no fee for inspection. If ownerseeks extension later, owner pays $350/day plus expenses forinspection. Burke makes inspection; owner pays for worknecessary to bring roof to condition acceptable to Burke andpays fee for extension.25. Assignability Non-transferable. Warranty solely benefits the first consumer,purchaser or owner of Bitec Mineral Design membrane; itcannot be transferred in any form to anyone.Not assignable without written permission from BondCote<strong>Roofing</strong> Systems.No restrictions stated.26. Special features/conditions Claims require proof of purchase of the Mineral Designmembrane. Owner must provide Bitec with a receipt whichcan be traced to a Bitec distributor who sold the MineralDesign membrane.Bitec has ninety days after receipt of notification to make,or cause to be made repairs or replacements covered underwarranty. Prior to expiration of the ninety day period, Bitec willnot be liable for any cost of repair or replacement unless Bitechas given written approval of the repair or replacement ofMineral Design membrane.Warranty may not be changed or modified. No one,including any representative or employee of Bitec has theauthority to assume any additional liability for Bitec inconnection with Mineral Design membranes.BondCote <strong>Roofing</strong> Systems has no obligation under thewarranty without owner's signature accepting the warranty inlieu of all other remedies and the return of signed copy toBondCote <strong>Roofing</strong> Systems; the extended warranty has thesame limitations as the original ten-year warranty. Owner shallbe responsible for the cost of investigation if any leaks aredetermined not to be covered under warranty.No representative of Burke has authority to make anyrepresentation or promises except as stated in warrantydocument27. Executed by owner Warranty registration card must be completed and sent toBitec within 10 days of membrane installation.Yes (See Special Features/Conditions.) No581

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredBurke Rubber Company, adivision of Burke IndustriesBurkeline Gold Total <strong>Roofing</strong> System Warranty for CommercialBuilding; April 1988; BR00355CSPE HypalonBurke Rubber Company, adivision of Burke IndustriesBurkeline Standard Limited Material Warranty; February1988; BR 00352CSPE HypalonCarlisle SynTec IncorporatedCarlisle Golden Seal Total <strong>Roofing</strong> System Warranty;” WA-F0001 (1/99)Sure-Seal EPDM, Brite-Ply EPDM, Fleeceback EPDM, Sure-Weld TPO <strong>Roofing</strong> Systems4. Scope of coverage Material and workmanship; Burke warrants that Burke willcause to be repaired leaks in Burkeline <strong>Roofing</strong> Systemcaused by defects in roofing system's material or workmanshipof the Burke approved roofing applicator.Material only; Burke warrants that Burkeline roofing productsmanufactured by or for it will be free from defects in materials.Products may not always conform exactly to illustrations orsamples.Material and workmanship; Carlisle warrants to repair leaks inthe Carlisle Golden Seal Total <strong>Roofing</strong> System caused by adefect in the Carlisle Total <strong>Roofing</strong> System’s materials orworkmanship of Carlisle-authorized roofing applicator ininstalling the Total <strong>Roofing</strong> System. Carlisle Total <strong>Roofing</strong>System is defined as Carlisle membrane, flashings, counterflashings, adhesives and sealants, insulation, recovery board,fasteners, fastener plates, fastening bars, metal edging, metaltermination bars, and any other Carlisle-brand products utilizedin installation.5. Length of coverage 15 years (See Conditions For Renewal or Extension.) 2 years (See Conditions for Renewal or Extension.)6. Nature of remedy Burke's sole obligation is the repair or replacement ofBurkeline roofing products that prove defective within thelimited warranty.7. Monetary limitations Burke's liability not to exceed owner's original cost of theinstalled roof over the life of warranty.Burke's sole obligation is the repair or replacement ofBurkeline roofing products that prove defective within thelimited warranty.Burke's liability shall not exceed the price paid for the defectiveproduct, and Burke may, at its option, discharge such liability, ifany, by supplying free of charge an equal quantity of roofingproducts to replace those found to be defective or by issuingcredit to the customer in the amount of a net billing price aftercash and other discounts allowed.8. Notification requirements Written notice within 30 days of discovery of any leaks Written notice describing any claimed defect must be given toBurke immediately upon discovery and in no case later than 30days from discovery.10 years: Brite-Ply and Brite-Ply Fleeceback10 or 15 years: all other systemsCarlisle will repair leaks in the Carlisle Golden Seal Total<strong>Roofing</strong> System.None statedWritten notice within 30 days of discovery of any leak in theCarlisle Total <strong>Roofing</strong> System to Carlisle’s Warranty ServicesDepartment, P.O. Box 7000, Carlisle, PA 170139. Exclusive or additional remedy Warranty excludes all other warranties; Burke not liable for anyother damages resulting from the use of the roofing system orcaused by any defect, failure, or malfunction of the roofingsystem, whether a claim is based upon warranty, contract,negligence, or otherwise; excludes UCC warranties.Excludes all other warranties; Burke is not liable for any otherdamages resulting from the use of the product or caused byany defect, failure, or malfunction of the product, whether aclaim is based upon warranty, contract, negligence orotherwise; excludes UCC warranties.Owner’s remedies and Carlisle’s liability limited to Carlisle’srepair of leaks; remedy stated in warranty is owner’s sole andexclusive remedy for failure of the Carlisle Total <strong>Roofing</strong>System or its components; excludes UCC warranties.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicabilityBurke's determination; Burke's sole judgment whetherexclusions applyBurke's determination; Burke's sole judgment whetherexclusions applyCarlisle's determination. (See Special Features/Conditions.)12. Specific exclusions from coverage(see item 12 in Introduction)1, 3, 4, 5, 7, 18 1, 3, 4, 5, 7, 18, 20 1, 2, 3, 5, 7, 13, 16, 17. Warranty also specifically excludesinsect infestation13. Wind coverage/exclusions Warranty excludes coverage for roof damage for winds of peakgust speed of __ mph measured 35 feet above the ground,hurricanes, and tornadoes. Manufacturer indicates that thewarranty covers roof damage from wind speeds up to 70 milesper hour. If higher wind speeds are required, Burke will designand approve increased fastener patterns and attachments toaccommodate the request.Warranty excludes damage to the product caused by gales,hurricanes, and tornadoes. [Burke indicates that there is nocoverage for damage caused by wind.Warranty form states it excludes winds of peak gust speeds___ mph or higher measured at 10 meters above ground,hurricanes, and tornadoes. Carlisle indicates that warrantycovers roof damage resulting from wind speeds up to 55 mph.Carlisle indicates that, when a request is made, warranty canbe obtained to cover higher speeds after a project specificationand detail review.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F, G B,F,G B, C, F (including failure of owner to comply with Carlisle’s careand maintenance information sheet)582

15. Cost to obtain $11.00/square None16. Minimum charge $1,100 NoneManufacturer charges for this warranty; however, they refusedto provide costs. Contact manufacturer directly for specificpricing information.Manufacturer charges for this warranty; however, they refusedto provide costs. Contact manufacturer directly for specificpricing information17. Ineligible structure or building use Private residences, condominiums, townhomes None Single-family residential structures; however, warranty isavailable for apartment homes, co-ops, condominiums, andthe like.18. Pre-construction notice andapproval requirementsContractor must submit completed Burke Form BR00339 toBurke; approval number and changes/requirements thenforwarded by Burke to applicator; must have approval numberto apply for final warranty inspection.NoCarlisle must be contacted for a project specification and detailreview19. Approved, authorized, or licensedrequirementsYes No Yes20. Job inspection policy Burke field service employees make on-site inspections priorto, during (depending on job) and after application prior toissuance of warranty, as well as two years later; $350/day plusexpenses for re-inspections only.21. Contractor’s post-installationobligationContractor obligated to make repairs to all leaks, any defectsand materials and workmanship for two years.No on-site inspectionsAlthough this is a material-only warranty, contractor obligatedto make repairs to workmanship deficiencies for two years.If requested by owner or applicator, Carlisle technicalrepresentative makes on-site inspections prior to and duringapplication; Carlisle makes on-site inspection after completionprior to issuance of warranty; two inspections at no charge.Each additional inspection will cost $500Contractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; Burke indicates that it carries insurance that covers itswarranty obligations.No; Burke indicates that it carries general liability and blanketumbrella insurance that covers its warranty obligations.No; Carlisle indicates that it does not carry insurance coveringits warranty obligation.23. Issuing entity manufactures and/orsells productsBurke manufactures and sells product. Burke manufactures and sells product. Carlisle manufactures and sells system components.24. Conditions for renewal orextensionWarranty may be extended for five years. If owner notifiesBurke at time of issuance of original warranty of intent to seekan extension, there is no charge for inspection. If owner seeksextension later, owner pays $350/day plus expenses forinspection.25. Assignability No restrictions stated. No restrictions stated.26. Special features/conditions No representative of Burke has authority to make anyrepresentation or promises except as stated in warrantyWarranty may be extended for up to 15 years by payment offee. Fee varies depending on length of warranty and systemused.Warranty states that it is expressly understood that (1)theproducts may not always conform exactly to illustrations orsamples and (2) Burke has no control over the customer's useof the products or the advisability of using such products forany particular installation. Warranty also states that if anywarranty provisions are held or determined to be invalid orunenforceable, the remaining provisions of the warranty shallremain in full force and effect.27. Executed by owner No No NoNo renewal provisionWarranty not assignable by operation of law or otherwise;however, application may be made by a new building owner forreissuance of the warranty during the original warranty period.Certain procedures, including an inspection of the roofingsystem by a Carlisle representative, and fees may apply to anyreissuance. Carlisle reserves the right, in its sole discretion, torefuse to reissue warranty.Carlisle shall not be responsible for the cleanliness ordiscoloration of the membrane system caused byenvironmental conditions including, but not limited to, dirt,pollutants, or biological agents. Carlisle does not warrantproducts utilized in installation that it has not furnished andspecifically disclaims liability, under any theory of law, arisingout of installation and performance of, or damages sustainedby or caused by, products not furnished by Carlisle. IfCarlisle’s investigation after receipt of notice of leak fromowner reveals that cause of leak is outside scope of warranty,investigation and repair costs are to be paid by the owner.583

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Carlisle SynTec Incorporated Celotex Corporation Celotex Corporation2. Title, original publication date, andidentifying symbol, if any“Carlisle Membrane <strong>Roofing</strong> System Warranty;” WA-F0002(1/99)"Commercial <strong>Roofing</strong> Material Only Limited Warranty"; September 1997; Form1146-1190 Rev.D"Celo-1 EPDM Membrane Material Only Limited Warranty";September 1997; Form 1010-0888 Rev. D3. Product, specification, or systemcoveredSure-Seal EPDM, Brite-Ply EPDM, Fleeceback EPDM, Sure-Weld TPO <strong>Roofing</strong> SystemsBUR Specifications: AGS-5-W-M, AGS-5-C-M, AGS-4-F-G, G/A-5-W-M, G/A-5-C-M, G/A-4-F-G, AGS-4-W-M, AGS-4-C-M, AGS-4-F-S, G/A-4-W-M, G/A-4-C-M, G/A-4-F-S, AGS-4-W-G, AGS-4-C-G, AGS-H+4-W-M, G/A-4-W-G, G/A-4-C-G, G/A-H+4-W-M, AGS-4-W-S, AGS-4-C-S, AGS-H+3-W-M, G/A-4-W-S, G/A-4-C-S, G/A-H+3-W-M, G/A-3-W-G, AGS-5-F-M, AGS-H+3-W-S, G/A-5-F-M, G/A-H+3-W-S, G/A-3-W-M, AGS-3-C-G, AGS-H+3-W-G, G/A-3-C-G, G/A-H+3-W-G,G/A-3-W-S, AGS-4-F-M, G/A-4-F-M; Modified Bitumen Specifications: SBS-4-W-M, SBS-DP-3-F-M, APP-3-C-M, SBS-3-W-M, SBS-DP-2-F-M, APP-2-C-M,SBS-2-W-M, SBS-H+2-W-M, APP-4-C-S, SBS-DP-4-W-M, SBS-H+2-W-M, APP-3-C-S, SBS-DP-3-W-M, SBS-H+2-IV-W-M, APP-2-C-S, SBS-DP-2-W-M, SBS-DP-H+3-W-M, APP-4-F-M, SBS-4-C-M, SBS-DP-H+2-W-M, APP-3-F-M, SBS-3-C-M, SBS-2-C-M, APP-2-F-M, SBS-2-C-M, SBS-2-R-M, APP-4-F-S, SBS-DP-4-C-M, APP-4-W-M, APP-3-F-S, SBS-DP-3-C-M, APP-3-W-M, APP-2-F-S, SBS-DP-2-C-M, APP-2-W-M, APP-H+3-W-M, SBS-4-F-M, APP-4-W-S, APP-H+2-W-M, SBS-3-F-M, APP-3-W-S, APP-H+2-IV-W-M, SBS-2-F-M, APP-2-W-S, APP-H+3-W-S, SBS-DP-4-F-M, APP-4-C-M, APP-H+2-W-S, APP-H+2-IV-W-SCelo-1 Type I, Celo-1 Type II, Celo-1 Type III, Celo-1 Type IIIR4. Scope of coverage Material and workmanship; Carlisle warrants to repair leaks inthe Carlisle membrane roofing system caused by a defect inthe Carlisle membrane roofing systems’s materials orworkmanship of Carlisle authorized applicator in installing themembrane system. Carlisle roofing system is defined asCarlisle membrane, flashings, adhesives and sealants, andany other Carlisle-brand products utilized in installation.Material only; Celotex warrants that the Celotex roof membrane and baseflashing will withstand ordinary wear and tear by the elements and will be free ofmanufacturing defects which affect the ability of the materials to keep the roofwatertight.Material only; Celotex represents that its cured EPDM rubberroofing sheet is free from manufacturing defects and will notdeteriorate prematurely to the point of failure due toweathering.5. Length of coverage 5 to 10 years 10 years: built-up roofing; 12 years: modified bitumen 10 years6. Nature of remedy Carlisle will repair leaks in the Carlisle membrane system. Celotex will provide replacement material. Celotex will, at its option, provide replacement membrane, F.O.B.,place of manufacture, to effect repair or provide credit to be appliedtowards the purchase of replacement membrane. Celotex notresponsible for any labor or service charges pertaining to eitheroriginal or replacement membrane. Warranty is prorated at therate of 1/120 for each month of service.7. Monetary limitations None stated. Celotex's maximum responsibility is the original cost of the Celotex membraneand flashing materials. Celotex is not responsible for any labor charges.8. Notification requirements Written notice within 30 days of discovery of any leak in the Carlisle membranesystem to Carlisle's Warranty Services, P.O. Box 7000, Carlisle, PA 170139. Exclusive or additional remedyOwner’s remedies and Carlisle’s liability limited to Carlisle’srepair of leaks; remedy stated in warranty is owner’s sole andexclusive remedy for failure of the Carlisle roofing system or itscomponents; excludes UCC warranties.Written notice within 10 days of discovery of any leaks in the roofing system toCelotex Corporation, P.O. Box 31602, Tampa, FL 33631.. Warranty is owner's sole and exclusive remedy with respect to the roofingsystem and owner waives any and all other claims, rights, proceedings, actionsand demands from Celotex relating to the roofing system. Warranty is in lieu ofany and all other Celotex warranties; excludes UCC warranties.Celotex's maximum responsibility is the original cost of theCelotex membrane and flashing materials. In calculatingCelotex's liability, the cost of the original membrane will bereduced by the amount of usage owner has received prior tothe date of the claim, at the rate of 1/120 for each month ofservice provided by the membrane after the date of the originalpurchase.Written notice within 10 days of the discovery of any leaks inthe membrane to Celotex Corporation, P.O. Box 31602,Tampa, FL 33631.Celotex makes no warranties or guarantees of any kind,express or implied, except as stated in warranty; excludes UCCwarranties.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Carlisle's determination (See Special Features/Conditions.)Celotex's determination1, 2, 3, 5, 7, 13, 16, 17. Warranty also specifically excludes insect infestation. 1 (including chemical or organic deposits), 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 15, 20,2313. Wind coverage/exclusions Warranty form states that it excludes Awinds of peak gust speeds ___ mph orhigher measured at 10 meters above ground,@ hurricanes, and tornadoes.Carlisle indicates that 55 is inserted when warranty is issued so that warrantycovers roof damage resulting from wind speeds up to 55 mph.Warranty covers roof damage resulting from wind speeds upto 72 mph. Warranty excludes gales, hurricanes andtornadoes.Celotex's determination.1 (including chemical or organic deposits), 2, 3, 4, 5, 6, 8,9, 11, 12, 15, 19, 20, 23Warranty covers roof damage resulting from wind speeds up to72 mph. Warranty excludes gales, hurricanes and tornadoes.584

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F (including failure of owner to comply with Carlisle'scare and maintenance information sheet)CC15. Cost to obtain (Carlisle declines to provide this information because it is usedfor marketing purposes.)$100None16. Minimum charge (Carlisle declines to provide this information because it is usedfor marketing purposes.)$100 None17. Ineligible structure or building use Single-family residential structures; however, warranty isavailable for apartment homes, co-ops, condominiums, andthe like.NoneNone18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsCarlisle must be contacted for a project specification anddetail review on projects where the building height exceeds 75feet for Design B, 150 feet for mechanically fastened systems,and 250 feet for adhered systems.Yes20. Job inspection policy If requested by owner or applicator, Carlisle technicalrepresentative makes on-site inspections prior and duringapplication; after completion prior to issuance of warranty; twoinspections at no charge. Each additional inspection will cost$500.21. Contractor’s post-installationobligation22. Backed by named insurance orsuretyContractor obligated to make repairs to workmanshipdeficiencies for two years.No; Carlisle indicates that it does not carry insurance coveringits warranty obligation.NoneNoNo on-site inspectionsNone; material-only warranty.No; Celotex indicates that it does not carry insurance coveringits warranty obligations.None requiredYesNo on-site inspections.None; material-only warrantyNo; Celotex indicates that it does not carry insurance coveringits warranty obligations.23. Issuing entity manufactures and/orsells productsCarlisle manufactures and sells system components.Celotex manufactures and sells the product.Celotex manufactures and sells the product.24. Conditions for renewal orextensionWarranty may be renewed for an additional 5 years. (Carlisledeclined to provide further information regarding costs andprocedures to renew.)No renewal provision. No renewal provision25. Assignability Warranty is not assignable by operation of law or otherwise;however, application may be made by a new owner for reissuanceof the warranty during the original warranty period. Certainprocedures, including but not limited to, an inspection of the<strong>Roofing</strong> System by a Carlisle representative, and fees may applyto any reissuance.26. Special features/conditions Carlisle shall not be responsible for the cleanliness or discolorationof the Carlisle roofing system caused by environmental conditionsincluding, but not limited to, dirt, pollutants, or biological agents.Carlisle does not warrant products utilized in installation that it hasnot furnished and specifically disclaims liability, under any theoryof law, arising out of the products not furnished by Carlisle. IfCarlisle’s investigation after receipt of notice of a leak from ownerreveals that cause of leak is outside scope of warranty,investigation and repair costs are to be paid by the owner.27. Executed by owner NoNot assignable; warranty accrues to the original owner namedin the warranty and does not accrue to the benefit of anytenant, purchaser, successor or assignee.Warranty only applies to Celotex materials which are installed inaccordance with current Celotex specifications.No representative of Celotex has authority to make anyrepresentation or promise except as stated in warranty document.Any inspection conducted by Celotex may require that adequatesamples of the roof be taken for testing by Celotex to evaluate anyclaim of a purported defect or deterioration. Refusal by the ownerto permit removal of samples for testing constitutes a waiver of theclaim.NoNot assignable; warranty accrues to the original owner namedin the warranty and does not accrue to the benefit of anytenant, purchaser, successor, or assigneeNo representative of Celotex has authority to make anyrepresentation or promise except as stated in warranty document.Any inspection conducted by Celotex may require that adequatesamples of the Membrane be taken for testing by Celotex toevaluate any claim of a purported defect or deterioration. Refusalby the owner to permit removal of samples for testing constitutes awaiver of the claim.No585

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Celotex Corporation Celotex Corporation Celotex Corporation2. Title, original publication date, andidentifying symbol, if any"Specification Warranty"; September 1997; Form 1033-0487 Rev. B "<strong>Roofing</strong> System Limited Warranty"; September 1997; Form 1005-1092Rev. A"Celo-1 Extended Coverage <strong>Roofing</strong> Sheet Only Warranty"; September1997; Form 1038-0587 Rev. C3. Product, specification, or systemcoveredBuilt-Up <strong>Roofing</strong> Specifications: AGS-5-W-M, AGS-4-C-S, AGS-H+3-W-M, AGS-4-W-M, AGS-3-C-G, AGS-H+3-W-G, AGS-4-W-G,AGS-5-F-M, AGS-H+3-W-S, AGS-4-W-S, AGS-4-F-M, AGS-5-C-M,AGS-4-F-G, AGS-4-C-M, AGS-4-F-S, AGS -4-C-G, AGS-H+4-W-M.(All specifications require use of AGS felt.)4. Scope of coverage Material and workmanship; Celotex will repair any leaks in the Celotexroof membrane and base flashing caused by defects in the Celotexroofing materials or errors in workmanship.Built-Up <strong>Roofing</strong> Specifications: G/A-5-W-M, G/A-5-C-M, G/A-4-F-G,G/A-4-W-M, G/A-4-C-M, G/A-4-F-S, G/A-4-W-G, G/A-4-C-G, G/A-H+4-W-M, G/A-4-W-S, G/A-4-C-S, G/A-H+3-W-M, G/A-3-W-M, G/A-3-C-G,G/A-H+3-W-G, G/A-3-W-G, G/A-5-F-M, G/A-H+3-W-S, G/A-3-W-S, G/A-4-F-M; Modified Bitumen Specifications: SBS-4-W-M, SBS-DP-3-F-M, APP-3-C-M, SBS-3-W-M, SBS-DP-2-F-M, APP-2-C-M, SBS-2-W-M,SBS-H+3-W-M, APP-4-C-S, SBS-DP-4-W-M, SBS-H+2-W-M, APP-3-C-S, SBS-DP-3-W-M, SBS-H+2-IV-W-M, APP-2-C-S, SBS-DP-2-W-M,SBS-DP-H+3-W-M, APP-4-F-M, SBS-4-C-M, SBS-DP-H+2-W-M, APP-3-F-M, SBS-3-C-M, SBS-2-C-M, APP-2-F-M, SBS-2-C-M, SBS-2-R-M,APP-4-F-S, SBS-DP-4-C-M, APP-4-W-M, APP-3-F-S, SBS-DP-3-C-M,APP-3-W-M, APP-2-F-S, SBS-DP-2-C-M, APP-2-W-M, APP-H+3-W-M,SBS-4-F-M, APP-4-W-S, APP-H+2-W-M, SBS-3-F-M, APP-3-W-S, APP-H+2-IV-W-M, SBS-2-F-M, APP-2-W-S, APP-H+3-W-S, SBS-DP-4-F-M,APP-4-C-M, APP-H+2-W-S, APP-H+2-IV-W-S; EPDM Specifications:Celo-1 Type I, Celo-1 Type II, Celo-1 Type III, Celo-1 Type IIIRMembrane Insulation Assembly (MIA)Material and workmanship; Celotex warrants that it will repair leaks inthe Celotex roof membrane and base flashing caused by defects in theCelotex roofing materials or errors in workmanship.Celo-1 Type I, Celo-1 Type II, Celo-1 Type III, Celo-1 Type IIIRMaterial only; Celotex represents that its cured Celo-1 EPDM roofingsheet is free from manufacturing defects and will not deteriorateprematurely to the point of failure due to weathering.5. Length of coverage 10 years: 3 ply; 15 years: 3 ply; 20 years: 4 ply 10 years: Celo-1 EPDM, Built-up <strong>Roofing</strong>; 12 years: Modified Bitumen;15 years: Celo-1 EPDM Built-up <strong>Roofing</strong>, Modified Bitumen; 20 years:Built-up <strong>Roofing</strong> and Modified Bitumen6. Nature of remedy Celotex will have repairs made and will pay for such repairs. Owner'ssole remedy and Celotex's liability limited to Celotex's repair of Celotexroofing materials.Celotex will have repairs made and will pay for such repairs. Owner'ssole remedy and Celotex's liability limited to Celotex's repair of theCelotex roof membrane and base flashing.7. Monetary limitations None stated. For built-up roofing and modified bitumen specifications, Celotex'smaximum liability is limited to $100/square. For Membrane InsulationAssembly Warranty, Celotex's maximum liability is limited to$130/square. For Celo-1 EPDM specifications, Celotex's maximumliability is limited to the original installed cost of Celotex membranematerials.5 or 10 years beyond termination date of <strong>Roofing</strong> System LimitedWarranty for Celo-1 EPDM (See Special Features/Conditions)Celotex will provide replacement material, F.O.B., place of manufacture.Celotex not responsible for any labor and service charges pertaining toeither original or replacement product. Owner's sole remedy andCelotex's liability is replacement of that portion of the Celotex roofmembrane or base flashing which contains manufacturing defects ordeterioration caused by ordinary wear and tear of the elements that hascaused one or more leaks. Warranty is prorated for each month ofservice.Celotex's maximum responsibility is the original cost of the Celotexmembrane and flashing materials. Original purchase price of EPDMsheet is reduced for each month of service provided by the product.8. Notification requirements Written notice within 10 days of discovery of any leaks in the roofingsystem to Celotex Corporation, P.O. Box 31602, Tampa, FL 33631.9. Exclusive or additional remedy Warranty is owner's sole and exclusive remedy with respect to theroofing system and owner waives any and all other claims, rights,proceedings, actions and demands from Celotex relating to the roofingsystem. Warranty is in lieu of any and all other Celotex warranties;excludes UCC warranties.Written notice within 10 days of discovery of leaks in the roofing systemto Celotex Corporation, P.O. Box 31602, Tampa, FL 33631.Warranty is owner's sole and exclusive remedy with respect to theroofing system and Owner waives any and all other claims, rights,proceedings, actions and demands from Celotex relating to the roofingsystem. Warranty is in lieu of any and all other Celotex warranties;excludes UCC warranties.Written notice within 10 days of discovery of any leaks in the roofingsystem to Celotex Corporation, P.O. Box 31602, Tampa, FL 33631.Celotex makes no warranties or guarantees of any kind, express orimplied, except as stated in warranty; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoCelotex's determination Celotex's determination. Celotex's determination12. Specific exclusions from coverage(see item 12 in Introduction)1 (including chemical or organic deposits), 2, 3, 4, 5, 6, 7, 8, 9, 11, 12,15, 231 (including chemical or organic deposits), 2, 3, 4, 5, 6, 7, 8, 9, 11, 12,15, 231 (including chemical or organic deposits), 2, 3, 4, 5, 6, 7, 8, 9, 11, 12,15, 2313. Wind coverage/exclusions Warranty covers roof damage resulting from wind speeds up to 72 mph.Warranty excludes gales, hurricanes and tornadoes.Celotex indicates warranty covers damage resulting from winds withoutstating a speed. Warranty excludes gales, hurricanes and tornadoes.Warranty covers roof damage resulting from wind speeds up to 72 mph.Warranty excludes gales, hurricanes and tornadoes.14. Specific conditions to makewarranty ineffective or null andC C C586

warranty ineffective or null andvoid (see item 14 in Introduction)15. Cost to obtain 10 years: $10.00/square; 15 years: $12.00/square; 20 years:$15.00/squareCelo-110 years: $ 5.00/square; 15 years: $10.00/squareBuilt-Up <strong>Roofing</strong>10 years: $ 7.00/square; 10 years MIA: $10.00/square; 15 years: $9.00/square; 15 years MIA: $11.00/square; 20 years: $14.00/square; 20years MIA: $13.00/squareModified Bitumen12 years: $ 8.00/square; 12 years MIA: $10.00/square; 15 years: $9.00/square;15 years MIA: $11.00/square; 20 years: $14.00/square; 20years MIA: $13.00/square16. Minimum charge 10 years: $1,000; 15 years: $1,200; 20 years: $1,500 Celo-110 years: $ 500; 15 years: $1,000Built-up <strong>Roofing</strong>10 years: $ 700; 10 years MIA: $1,000; 15 years: $ 900; 15 years MIA:$1,100; 20 years: $1,400; 20 years MIA: $1,300Modified Bitumen12 years: $ 800; 12 years MIA: $1,000; 15 years: $ 900; 15 yearsMIA: $1,100; 20 years: $1,400;20 years MIA: $1,3005 years: $1.00/square; 10 years: $2.00/square5 years: $100; 10 years: $20017. Ineligible structure or building use None Contact local Celotex sales office for building evaluation. Contact local Celotex sales office for building evaluation.18. Pre-construction notice andapproval requirementsContractor must fill out Notice of Award; if accepted, notify Celotex ofstart date and completion.Contractor must fill out a Notice of Award; if accepted, notify Celotex ofstart date and completion.Contractor must fill out a Notice of Award; if accepted, notify Celotex ofstart date and completion.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Independent inspection service makes on-site inspections prior toapplication and after completion prior to issuance of warranty, as wellas two years after issuance of warranty; no charge.Independent inspection service makes on-site inspections aftercompletion prior to issuance of warranty, as well as two years afterissuance of warranty; no charge.Independent inspection service makes on-site inspections aftercompletion, as well as two years after issuance of warranty; no charge.21. Contractor’s post-installationobligationContractor obligated to make repairs to all leaks, any defects andworkmanship deficiencies for two years.Contractor obligated to make repairs to materials and workmanshipdeficiencies for two years.Contractor obligated to make repairs to materials and workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; Celotex indicates that it does not carry insurance covering itswarranty obligations.No; Celotex indicates that it does not carry insurance covering itswarranty obligations.No; Celotex indicates that it does not carry insurance covering itswarranty obligations.23. Issuing entity manufactures and/orsells productsCelotex manufactures and sells product. Celotex manufactures and sells the product. Celotex manufactures and sells the product.24. Conditions for renewal orextensionWarranty may be extended for five years at a cost of $500.25. Assignability Not assignable; warranty applies to the original owner named in thewarranty and cannot be transferred to or for the benefit of any tenant,purchaser, successor, or assignee.26. Special features/conditions No representative of Celotex has authority to make any representationor promise except as stated in warranty document.Any inspection conducted by Celotex may require that adequatesamples of the roofing system be taken for testing by Celotex toevaluate any claim of purported defect or deterioration. Refusal by theowner to permit removal of samples for testing constitutes a waiver ofthe claim.No renewal provision. For Celo-1 specifications, "Celo-1 ExtendedCoverage <strong>Roofing</strong> Sheet Only Warranty" for 5 or 10 year additionalmaterial-only warranty coverage.Not assignable; warranty accrues to the original owner named in thewarranty and does not accrue to the benefit of any tenant, purchaser,successor, or assignee.This warranty form is used for built-up roofing, modified bitumen, Celo-1EPDM, membrane insulation assembly (M.I.A.), and membrane only. Attime of issuance, warranty type is designated.No representative of Celotex has authority to make anyrepresentation or promise except as stated in warranty document.Any inspection conducted by Celotex may require that adequatesamples of the roofing system be taken for testing by Celotex toevaluate any claim or purported defect or deterioration. Refusal by theowner to permit removal of samples for testing constitutes a waiver ofthe claim.27. Executed by owner No No NoNo renewal provisionNot assignable; warranty accrues to the original owner named in thewarranty and does not accrue to the benefit of any tenant, purchaser,successor, or assignee.This is an extended warranty, issued and valid only with purchase ofCelotex <strong>Roofing</strong> System Limited Warranty and covers roofing sheet onlyafter expiration of standard warranty.No representative of Celotex has authority to make anyrepresentation or promise except as stated in warranty document.Any inspection conducted by Celotex may require that adequatesamples of the roofing system be taken for testing by Celotex toevaluate any claim of purported defect or deterioration. Refusal by theowner to permit removal of samples of testing constitutes a waiver of theclaim.If Celotex <strong>Roofing</strong> System Limited Warranty is terminated orcancelled for reasons other than normal expiration, this <strong>Roofing</strong> SheetOnly Limited Warranty shall be void upon such termination orcancellation.587

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Conklin Company, Inc. Conklin Company, Inc. Conklin Company, Inc.2. Title, original publication date, andidentifying symbol, if anyΑConklin Limited Materials Warranty≅; November 1990;1-000141A (Code #078270B 11/96 appears on packetaccompanying warranty documents.)“Conklin Company Limited Joint Warranty”; Form E; November1990; 1-00139A; (Code #078269A 07/94 appears on packetaccompanying warranty documents.)ΑConklin Company, Inc. Total Roof System Limited JointWarranty≅; Form E; November 1990; 1-000139; (Code#078268B 01/93 appears on packet accompanying warrantydocuments.)3. Product, specification, or systemcoveredHy-CrownHy-Crown. Warranty is limited exclusively to the use ofapproved Conklin Joint Warranty roofing membrane system.Hy-Crown. Warranty is limited exclusively to the use ofapproved substrate materials overlayed with an approvedConklin roof membrane. The Conklin Total Roof Systemconsists of Conklin roof membrane, Conklin fasteners, platesand approved boardstock insulation, polyurethane foam, and/orHy-Crown slip sheet.4. Scope of coverage Material only; Conklin warrants that the roof will not leak inordinary weather conditions due to any defect in productmaterials manufactured or sold by Conklin.Material and workmanship. Conklin and contractor jointlywarrant that the Conklin membrane/coating will be free fromwater leaks resulting from ordinary wear and tear from theelements or from improper application.5. Length of coverage 1 to 15 years 1 to 10 years 1 to 15 years6. Nature of remedy Conklin's obligation is limited to the replacement of Conklinroofing product(s) to repair leaks.Conklin and contractor, at their own expense, will supply thenecessary product and labor to correct leakage caused byordinary wear and tear or improper application.7. Monetary limitations None stated. Conklin's and contractor's obligation shall in no event exceedeither that portion of the original amount of the roofing contractthat relates to the roofing membrane/coating and the laborrequired to apply the roofing membrane/coating or $250,000,whichever is lesser.Material and workmanship. Conklin and contractor jointlywarrant that the Conklin system will be free from water leaksresulting from ordinary wear and tear from the elements orfrom improper application.Conklin and contractor, at their own expense, will supply thenecessary product and labor to correct leakage caused byordinary wear and tear or improper application.Conklin's and contractor's obligation shall in no event exceedeither that portion of the originalamount of the roofing contract that relates to the Conklinsystem and the labor required to apply the Conklin system or$250,000, whichever is lesser.8. Notification requirements Notification within 30 days following the discovery ofcircumstances giving rise to a claim to contractor and Conklinat 551 Valley Park Drive, P. O. Box 155, Shakopee, MN55379.Written notification within 30 days following discovery of leak tocontractor and Conklin at P. O. Box 155, Shakopee, MN55379.Written notification within 30 days following discovery of leak tocontractor and Conklin at P. O. Box 155, Shakopee, MN55379.9. Exclusive or additional remedy Warranty is given in lieu of any other warranty; excludes UCCwarranties; warrantors shall not be liable for any direct,indirect, incidental, consequential, special, or generaldamages resulting from failure of the Conklin system.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Owner's sole and exclusive remedy shall be the replacement ofthe defective membrane; warranty is given in lieu of any otherwarranty; excludes UCC warranties; warrantors shall not beliable for any direct, indirect, incidental, consequential, special,or general damages resulting from failure of the Conklinsystem.No No NoNeutral (no provision) Neutral (no provision) Neutral (no provision)Owner's sole and exclusive remedy shall be the replacement of thedefective membrane; warranty is given in lieu of any other warranty;excludes UCC warranties; warrantors shall not be liable for any direct,indirect, incidental, consequential, special, or general damages resultingfrom failure of the Conklin system.1, 2, 3, 4, 6, 7, 14, 15, 16 19, 20, 24, 25 1, 2, 3, 4, 6, 7, 14, 15, 16, 24, 25 1, 2, 3, 4, 6, 7, 14, 15, 16, 24, 2513. Wind coverage/exclusions Warranty excludes gales, windstorms, hurricanes, andtornadoes. Conklin indicates that warranty covers roof damageresulting from wind speeds up to 43 miles per hour.Warranty excludes winds of peak gust speed of __ mphmeasured 35 feet above the ground, hurricanes, andtornadoes. Conklin indicates that warranty will be issuedexcluding winds over 43 miles per hour. Conklin indicateshigher wind speed exclusions can be obtained by submitting awind speed application.Warranty excludes winds of peak gust speed of __ mphmeasured 35 feet above the ground, hurricanes, andtornadoes. Conklin indicates that warranty will be issuedexcluding winds over 43 miles per hour. Conklin indicateshigher wind speed exclusions can be obtained by submitting awind speed application.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Including notice to contractor (R)A, B, C, D, E, F, H, J, S. Failure of owner to file an accurate,complete maintenance/inspection report annually within 30 daysprior to anniversary of warranty effective date and failure tocomplete repairs deemed necessary within 60 days of annualinspection shall void the warranty. (See Special Features/Conditions.)A, B, C, D, E, F, H, J, S. Failure of owner to file an accurate, completedmaintenance/inspection report annually within 30 days prior toanniversary of warranty effective date and failure to complete repairsdeemed necessary within 60 days of annual inspection shall void thewarranty. (See Special Features/Conditions.)588

16. Minimum charge 1 to 10 years: no charge; 11 to 15 years: less than 10,000square feet, $200; greater than 10,000 square feet, $300$5.00/square$8.00/square16. Minimum charge None for 1 to 10 years; $200 for 11 to 15 years $500 $80017. Ineligible structure or building use None None None18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsApplication must be submitted within 30 days of completion ofprojectContractor must complete preapplication forms and submit toConklin prior to starting job. Conklin's written approval to start thejob is needed before work may begin. Conklin reserves the right topreinspect the job, for a fee, prior to granting approval.Yes Yes Yes20. Job inspection policy No on-site inspections. Conklin warranty inspector makes on-site inspection prior toapplication sometimes and after application prior to issuance ofwarranty; $300 charge per job per day, $100 for each additionalday. If roof passes first post-application inspection, $300 is appliedtoward cost of warranty. If roof fails the first post-applicationinspection, $300 is retained and an additional $300 is due uponscheduling of second post-application inspection.Contractor must complete preapplication forms and submitthem to Conklin prior to starting job; mandatory preinspectionby Conklin prior to granting approval.Conklin warranty inspector makes on-site inspection prior to and afterapplication prior to issuance of warranty; $300 charge per day forpreapplication inspection and $300 charge per day for post-applicationinspection; $100 charge for each additional day. If roof passes firstpost-application inspection, $300 is applied toward cost of warranty. Ifroof fails the first post-application inspection, $300 is retained and anadditional $300 is due upon scheduling of second post-application inspection.21. Contractor’s post-installationobligationNone; material-only warrantyContractor obligated to make repairs to all leaks, any defects,and material and workmanship deficiencies for two years.Contractor obligated to make repairs to all leaks, any defects,and material and workmanship deficiencies for three years22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionNo; Conklin indicates that it does not carry insurance coveringits warranty obligations.No; Conklin indicates that it does not carry insurance coveringits warranty obligations.Conklin sells product only. Conklin sells product only. Conklin sells product onlyNo renewal provision No renewal provision No renewal provision25. Assignability No restrictions stated. Warranty may be transferred upon giving notification to Conklinand contractor in writing within 60 days of transfer andownership of structure of the name of new building owner andthe intended use of building. Conklin may inspect roof for a feeand require any modification it deems necessary to protect themembrane. Failure to notify Conklin in timely manner renderswarranty null and void.No; Conklin indicates that it does not carry insurance coveringits warranty obligationsWarranty may be transferred upon giving notification to Conklinand contractor in writing within 60 days of transfer andownership of structure of the name of new building owner andthe intended use of the building. Conklin may inspect roof for afee and require any modification it deems necessary to protectthe roof system. Failure to notify Conklin in timely mannerrenders warranty null and void.26. Special features/conditions Warranty interpreted and governed by the laws of the state ofMinnesota.The Conklin Limited Joint Warranty is a joint warranty obligating ConklinCompany, Inc. and the contractor. The building owner must submit toConklin a mainte-nance/ inspection report completed either by originalcontractor or another contractor approved by Conklin on forms providedby Conklin. The required maintenance inspection report must be filedannually not less than 30 days prior to the anniversary of the effectivedate of the warranty. Failure to submit accurate, complete report voidsthe warranty. If corrections are needed, roofing repairs not covered bythe warranty must be completed within 60 days of the annual inspection,or warranty will be void. Conklin may require an inspection of repairswith inspection costs to be charged to building owner at currentinspection fee rates. Owner must give written notice to Conklin andcontractor within 30 days following discovery of damage to roof notcovered by warranty, must allow Conklin to inspect for a fee, and mustmake repairs in order for warranty to remain in effect. Warrantyinterpreted and governed by laws of Minnesota.The Conklin Company, Inc. Total Roof System Limited Joint Warranty isa joint warranty obligating Conklin Company, Inc. and the contractor.Building owner must submit to Conklin a maintenance/ inspection reportcompleted either by original contractor or another contractor approvedby Conklin on forms provided by Conklin. The required maintenanceinspection report must be filed annually not less than 30 days prior tothe anniversary of the effective date of the warranty. Failure to submitaccurate, complete report voids the warranty. If corrections are needed,roofing repairs not covered by the warranty must be completed within 60days of the annual inspection, or warranty will be void. Conklin mayrequire an inspection of repairs with inspection costs to be charged tobuilding owner at current inspection fee rates. Owner must give writtennotice to Conklin and contractor within 30 days following discovery ofdamage to roof not covered by warranty, allow Conklin to inspect for afee, and make repairs in order for warranty to remain in effect. Warrantyinterpreted and governed by laws of Minnesota.27. Executed by owner Yes Yes; warranty also executed by contractor. Yes; warranty also executed by contractor589

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Danosa Caribbean, Inc. Dermabit Dermabit2. Title, original publication date, andidentifying symbol, if anyDanosa <strong>Roofing</strong> Membrane System Limited Warranty≅; 1979Α Dermabit Waterproofing Industries ΑGuarantee Material andLabor≅; April 1988Dermabit Waterproofing Industries ΑMaterial Guarantee≅; April19883. Product, specification, or systemcoveredEsterdan RM; Glasdan AL-80, Glasdan R-36; Esterdan R-36 Dermabit APP 4170, 4170S; Elasphalt SBS 4170, 4170S Dermabit APP 4170; Elasphalt 4170, 4170S, SBS4. Scope of coverage Material and workmanship; Danosa will pay all authorizedcosts of repair to <strong>Roofing</strong> Membrane System necessary tostop leaks resulting from deterioration of Danosa roofing membraneor flashing membrane system resulting from ordinarywear and tear by elements, improper workmanship inapplication, blisters, buckles, ridges, wrinkles attributed toroofing membrane and its workmanship, and splits or cracksnot caused by structural failure or slippage.Material only; Dermabit guarantees that the membrane/flashing will not lose its waterproof quality due to naturaldeterioration of the membrane, bare spots, ridges, or splits notcaused by structural failure or movement of or cracks in substrate,roof base, or insulationMaterial only; Dermabit guarantees that Dermabit membranewill not lose its waterproof quality due to natural deterioration ofthe membrane, bare spots, ridges, or splits not caused bystructural failure or movement of or cracks in substrate or roofbase or insulation.5. Length of coverage 5, 10, 15 years 10 years: Dermabit 4170 APP, 4170 SBS (must be coated); 12years: Dermabit 4170, 4170S APP, SBS 4170, 4170S (allsmooth surfaced specifications must be coated); 20 years;Dermabit 4170, 4170S APP, SBS 4170, 4170S (must be twolayers and coated)10 years6. Nature of remedyDanosa will pay all authorized costs of repair necessary tostop leaks.7. Monetary limitations Danosa's total cumulative liability not to exceed a per-squarelimitation established by Danosa at time of completion ofwarranty formDermabit shall replace and/or repair any part of the Dermabitmembrane/flashing as shall be necessary solely in order tostop water leaks.. Dermabit's obligation over the life of guarantee is the aggregateamount equal to the amount that was paid by owner forsupply and installation of the Dermabit membrane/flashingcovered by the guarantee.Dermabit, in its sole discretion, will either refund to owner aprorated portion of the original purchase price of the defectiveDermabit membrane or provide, at no cost to owner, a portionof the Dermabit membrane required to replace defective membrane.Original purchase price reduced in accordance with a proratedschedule ranging from 100 percent of original purchase priceduring the first two years of roof service to 10 percent in year10.8. Notification requirementsWritten notice within 30 days of discovery of leakWritten notification by certified mail to D.W.I., Incorporated,P.O. Box 1154, McLean, VA 22101, within 10 days afterdiscovery of any leakWritten notification by certified mail to D.W.I., Incorporated,P.O. Box 1154, McLean, VA 22101, within 10 days afterdiscovery of any leak.9. Exclusive or additional remedy Excludes other guarantees and warranties; excludes UCCwarranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Excludes UCC warranties and any other obligations or liabilityon the part of DermabitNo No NoNeutral (no provision) Neutral (no provision) Neutral (no provision)1, 2, 3, 4, 6, 7, 8, 9, 10, 12, 13, 17, 22. [Danosa indicates that11, 15, 16, 18, 19, 23, 24, and 25 are also applicable.]1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 16, 17, 18 (includingexposure to any chemical or solution, radiation, orcontamination by radioactivity from any nuclear fuel waste), 22,23Dermabit's obligation to refund a portion of owner's originalpurchase price or to provide a portion of new membrane shallbe the owner's sole and exclusive remedy; excludes UCCwarranties and any other obligations or liability on the part ofDermabit.1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 16, 17, 18 (includingexposure to any chemical or solution, radiation, orcontamination by radioactivity from any nuclear fuel or waste),22, 23. (Also excludes failure of underlying materials orstructures to conform to manufacturer's specifications as toroof slopes or other requirements.)13. Wind coverage/exclusions Warranty excludes hurricanes. [Danosa indicates that there isno coverage for damage caused by wind.]Warranty excludes windstorms, hurricanes, and tornadoes.Warranty excludes windstorms, hurricanes, andtornadoes.590

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C. [Danosa indicates that F, G, H, I, J, K, L, M, N, O, P, Q,and S are also applicable.]B (see Special Features/Conditions), C, H, R. Cancellation of thisguarantee will also result if building is damaged by any causelisted in Specific Exclusions from Coverage so as to affect thewaterproof quality of the membrane or watertightness of structure.B (see Special Features/Conditions), C, H, R. Cancellation ofthis guarantee will also result if building is damaged by anycause listed under Specific Exclusions from Coverage so as toaffect waterproof quality of membrane or watertightness ofstructure..15. Cost to obtain $6.00 square None None16. Minimum charge None None None17. Ineligible structure or building use None Cold-storage buildings Cold-storage buildings18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsDanosa requires a letter from contractor indicating dateand Danosa specification number before commencingwork.NoneYes Yes No20. Job inspection policy Danosa inspector will inspect prior, during, and afterapplication; will also inspect every five years; no charge21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionContractor obligated to make repairs to workmanshipdeficiencies for 10 years..No on-site inspections. Owners signature on a 48-hourFlood test required.Contractor obligated to make repairs to workmanship deficienciesfor two years.No No; Dermabit indicates that it carries $1 million product-liabilityinsurance coverageDanosa manufactures and sells the product.Five- or ten-year extension available if roof passes inspectionand additional fee is paid.Dermabit manufactures and sells product.No renewal provisionNoneNo on-site inspectionsNoneNo; Dermabit indicates that it carries $1 million product- liabilityinsurance coverage.Dermabit manufactures and sells product.No renewal provision25. Assignability Not assignable Not assignable Not assignableNo26. Special features/conditionsAll repairs must be authorized in writing in advance byDanosa and all repairs must be performed only by a Danosaapproved roofing contractor.No action, suit, claim, or other proceeding arising out of or relatingto the Dermabit membrane or this guarantee may be filed orcommenced later than one year after the expiration of the term ofthis guarantee. Owner shall give 30 days' prior written notice toDermabit of owner's intention to repair or modify roof or othersurface over which membrane is installed, including plans andspecifications for the proposed repairs or modifications. NoDermabit representative, employee, or agent or any other personhas the authority to assume any additional or other liability orresponsibility in connection with the membrane installed.27. Executed by owner No No NoNo action, suit, claim, or other proceeding arising out of orrelating to the Dermabit membrane or this guarantee may befiled or commenced later than one year after the expiration ofthe term of this guarantee. Owner shall give 30 days' priorwritten notice to Dermabit of owner's intention to repair ormodify roof or other surface over which membrane is installed,including plans and specifications for the proposed repairs ormodifications. No Dermabit representative, employee, or agentor any other person has authority to assume any additional orother liability or responsibility in connection with the membraneinstalled.591

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entityDibiten,a division of Johns-Manville CorporationDibiten,a division of Johns-Manville CorporationDibiten,a division of Johns-Manville Corporation2. Title, original publication date, andidentifying symbol, if any"20 Year Limited Material Warranty"; March 1997; RS-9013 3-97"10 Year Limited Material Warranty"; March 1997; RS-9010 3-97 "15 Year Limited Material Warranty"; March 1997; RS-9012 3-973. Product, specification, or systemcoveredDibiten Poly/4 Two Ply Specifications: 401-2, 402-2, 403-2, 404-2 ; Dibiten Poly 4.5 Two Ply Specifications: 451-2,452-2, 453-2, 454-2Dibiten Poly 4 Uncoated Specifications: 401, 402, 403, 404, 405,406 in Region 2; Dibiten Poly 4.5 Granular Specifications: 451,452, 453, 454, R455, R456; Dibiten Poly 5 UncoatedSpecifications: 501, 502, 503, 504, R505, R506Dibiten Poly 5 specifications with roof coating: 501, 502, 503,504, R505, R5064. Scope of coverage Material only; Dibiten warrants its roofing membrane to befree of manufacturing defects.Material only; Dibiten warrants its roofing membrane to be free ofmanufacturing defects.5. Length of coverage 20 years 10 years 15 years6. Nature of remedy If the Dibiten membrane is proved to have manufacturingdefects that affect the watertight integrity of themembrane, Dibiten will pay a share, on a pro-rata basis(1/20 per year) of all costs including materials and labor,for repair or replacement of the defective Dibitenmembrane.7. Monetary limitations Dibiten's liability not to exceed the original cost of themembrane.8. Notification requirements Written notice within 30 days of discovery of water leaksthrough the Dibiten membrane to Dibiten, P.O. Box 5108,Denver, Colorado 80217-5108.9. Exclusive or additional remedy Warranty is exclusive warranty from Dibiten andrepresents the exclusive remedy available to anypurchaser of the membrane materials. Dibiten makes noother representation or warranty of any kind. No retailer,contractor or distributor is authorized to alter the warranty.Dibiten shall not be liable for any damages which arebased on negligence, breach of warranty, strict liability orany other theory other than the limited liability stated inwarranty; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)If the Dibiten membrane is proved to have manufacturing defectsthat affect the watertight integrity of the membrane, Dibiten will paya share, on a pro-rata basis (1/10 per year) of all costs includingmaterials and labor, for repair or replacement of the defectiveDibiten membrane.Dibiten's liability not to exceed the original cost of the membrane.Written notice within 30 days of discovery of water leaks throughthe Dibiten membrane to Dibiten, P.O. Box 5108, Denver, Colorado80217-5108.Warranty is exclusive warranty from Dibiten and represents theexclusive remedy available to any purchaser of the membranematerials. Dibiten makes no other representation or warranty ofany kind. No retailer, contractor or distributor is authorized to alterthe warranty. Dibiten shall not be liable for any damages which arebased on negligence, breach of warranty, strict liability or any othertheory other than the limited liability stated in warranty; excludesUCC warranties.No No NoNeutral (no provision) Neutral (no provision) Neutral (no provision)Material only; Dibiten warrants its roofing membrane to be freeof manufacturing defects.If the Dibiten membrane is proved to have manufacturingdefects that affect the watertight integrity of the membrane,Dibiten will pay a share, on a pro-rata basis (1/15 per year) ofall costs including materials and labor, for repair orreplacement of the defective Dibiten membrane.Dibiten's liability not to exceed the original cost of themembrane.Written notice within 30 days of discovery of water leaksthrough the Dibiten membrane to Dibiten, P.O. Box 5108,Denver, Colorado 80217-5108.Warranty is exclusive warranty from Dibiten and represents theexclusive remedy available to any purchaser of the membranematerials. Dibiten makes no other representation or warrantyof any kind. No retailer, contractor or distributor is authorizedto alter the warranty. Dibiten shall not be liable for anydamages which are based on negligence, breach of warranty,strict liability or any other theory other than the limited liabilitystated in warranty; excludes UCC warranties.1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 13, 17, 19, 20, 22 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 13, 17, 19, 20, 22 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 13, 17, 19, 20, 2213. Wind coverage/exclusions Warranty excludes wind and hurricanes. Dibiten indicatesthat there is no coverage for damage caused by wind.Warranty excludes wind and hurricanes. Dibiten indicates thatthere is no coverage for damage caused by wind.Warranty excludes wind and hurricanes. Dibiten indicates thatthere is no coverage for damage caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, F, H, I, M, R C, F, H, I, M, R C, F, H, I, M, R15. Cost to obtain None None None16. Minimum charge None None None17. Ineligible structure or building use Structures used for cool or cold storage. Structures used for cool or cold storage Structures used for cool or cold storage18. Pre-construction notice andapproval requirementsNone None None592

19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy No on-site inspections. No on-site inspections No on-site inspections21. Contractor’s post-installationobligationNone; material-only warranty. None; material-only warranty None; material-only warranty22. Backed by named insurance orsuretyNo; Dibiten indicates that it does not carry insurancecovering its warranty obligations.No; Dibiten indicates that it does not carry insurance covering itswarranty obligations.No; Dibiten indicates that it does not carry insurance coveringits warranty obligations.23. Issuing entity manufactures and/orsells productsDibiten manufactures and sells product.Dibiten manufactures and sells product.Dibiten manufactures and sells product.24. Conditions for renewal orextensionNo renewal provision. No renewal provision No renewal provision25. Assignability No restrictions stated. Warranty states that it is made tothe original owner.26. Special features/conditions In order to continue limited warranty coverage, ownermust implement a maintenance program prescribed byDibiten on the reverse side of limited warranty, includingrepair of any item beyond the scope of the warranty whichwould affect the integrity of the Dibiten membrane andrecoating smooth surfaced membranes as necessary and:(a) maintaining a file showing proof-of-purchase, allinspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaninggutters, downspouts, drains, and surrounding areas; (e)repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (f) correctingmaterials at edges of the roof that have been lifted bywind by an approved contractor; (g) examining roof topequipment to determine if they move excessively or leak;(h) checking building exterior for settlement or movement;and (i) recoating any areas of excessive wear, flaking, orblistered areas of protective coatings.Installing roofing contractor must be licensed by and ingood standing with the licensing authority of thejurisdiction in which the structure is located.Region 2 excludes CA, NV, AZ, UT, ID, NM, TX, HI,FL.No restrictions statedIn order to continue limited warranty coverage, owner mustimplement a maintenance program prescribed by Dibiten on thereverse side of limited warranty, including repair of any item beyondthe scope of the warranty which would affect the integrity of theDibiten membrane and recoating smooth surfaced membranes asnecessary and: (a) maintaining a file showing proof-of-purchase, allinspections and repairs; (b) inspecting roof at least semiannually;(c) removing any debris; (d) cleaning gutters, downspouts, drains,and surrounding areas; (e) repairing damaged masonry, poorlymounted counterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (f) correcting materialsat edges of the roof that have been lifted by wind by an approvedcontractor; (g) examining roof top equipment to determine if theymove excessively or leak; (h) checking building exterior forsettlement or movement; and (i) recoating any areas of excessivewear, flaking, or blistered areas of protective coatings.Installing roofing contractor must be licensed by and in goodstanding with the licensing authority of the jurisdiction in which thestructure is located.Region 2 excludes CA, NV, AZ, UT, ID, NM, TX, HI, FL.No restrictions statedIn order to continue limited warranty coverage, owner mustimplement a maintenance program prescribed by Dibiten onthe reverse side of limited warranty, including repair of any itembeyond the scope of the warranty which would affect theintegrity of the Dibiten membrane and recoating smoothsurfaced membranes as necessary and: (a) maintaining a fileshowing proof-of-purchase, all inspections and repairs; (b)inspecting roof at least semiannually; (c) removing any debris;(d) cleaning gutters, downspouts, drains, and surroundingareas; (e) repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (f) correctingmaterials at edges of the roof that have been lifted by wind byan approved contractor; (g) examining roof top equipment todetermine if they move excessively or leak; (h) checkingbuilding exterior for settlement or movement; and (i) recoatingany areas of excessive wear, flaking, or blistered areas ofprotective coatings.Installing roofing contractor must be licensed by and ingood standing with the licensing authority of the jurisdiction inwhich the structure is located.Region 2 excludes CA, NV, AZ, UT, ID, NM, TX, HI, FL.27. Executed by ownerRegistration form must be completed and returned toDibiten within 30 days of completion of the Dibitenmembrane and a copy of the contractor's bill must beattached.Registration form must be completed and returned to Dibiten within30 days of completion of the Dibiten membrane and a copy of thecontractor's bill must be attached.Registration form must be completed and returned to Dibiten within30 days of completion of the Dibiten membrane and a copy of thecontractor's bill must be attached.593

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entityDibiten,a division of Johns-Manville CorporationDibiten,a division of Johns-Manville CorporationDuro-Last <strong>Roofing</strong>, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered"12 Year Limited Material Warranty"; September 1997; RS-9011 9-97Dibiten Poly 4 Specifications with roof coating: 401, 402,404, R405, R4064. Scope of coverage Material only; Dibiten warrants its roofing membrane to befree of manufacturing defects."6 Year Limited Material Warranty"; March 1997; RS-9009 3-97 Α15 Year Warranty≅; August 1, 1991; DL 15-00 Rev.Dibiten Poly/4 Uncoated Specifications 401, 402, 403, 404, 405,406Material only; Dibiten warrants its roofing membrane to be free ofmanufacturing defects.5. Length of coverage 12 years 6 years 15 years6. Nature of remedy If the Dibiten membrane is proved to have manufacturingdefects that affect the watertight integrity of the membrane,Dibiten will pay a share, on a pro-rata basis (1/12 per year)of all costs including materials and labor, for repair orreplacement of the defective Dibiten membrane.If the Dibiten membrane is proved to have manufacturing defectsthat affect the watertight integrity of the membrane, Dibiten will paya share, on a pro-rata basis (1/6 per year) of all costs includingmaterials and labor, for repair or replacement of the defectiveDibiten membrane.Duro-LastMaterial and workmanship; Duro-Last grants a limited warrantyto the building owner that it will repair any leak in a Duro-Lastroof caused by any defect in Duro-Last membrane materials oraccessories or workmanship of the authorized dealer/contractor.Warranty does not extend to color.Provided that Duro-Last has authorized the repair and anauthorized dealer/contractor makes the repair, Duro-Last'sobligation is to repair any covered leak in the roof, includingrepair or replacement of membrane material and accessoriesand the cost of or furnishing labor to repair roof at thecontractor list price in effect at the time of repair.7. Monetary limitations Dibiten's liability not to exceed the original cost of themembrane.Dibiten's liability not to exceed the original cost of the membrane.Duro-Last's liability for cost of labor to repair roof is at thecontractor's list price in effect at time of repair; otherwise, nomonetary limitations stated.8. Notification requirements Written notice within 30 days of discovery of water leaksthrough the Dibiten membrane to Dibiten, P.O. Box 5108,Denver, Colorado 80217-5108.Written notice within 30 days of discovery of water leaks throughthe Dibiten membrane to Dibiten, P.O. Box 5108, Denver,Colorado 80217-5108.Written notification to Duro-Last's corporate headquarters, 525Morley Drive, Saginaw, MI 48601, within 30 days afterdiscovery of any leak9. Exclusive or additional remedy Warranty is exclusive warranty from Dibiten and representsthe exclusive remedy available to any purchaser of themembrane materials. Dibiten makes no otherrepresentation or warranty of any kind. No retailer,contractor or distributor is authorized to alter the warranty.Dibiten shall not be liable for any damages which arebased on negligence, breach of warranty, strict liability orany other theory other than the limited liability stated inwarranty; excludes UCC warranties.Warranty is exclusive warranty from Dibiten and represents theexclusive remedy available to any purchaser of the membranematerials. Dibiten makes no other representation or warranty ofany kind. No retailer, contractor or distributor is authorized to alterthe warranty. Dibiten shall not be liable for any damages whichare based on negligence, breach of warranty, strict liability or anyother theory other than the limited liability stated in warranty;excludes UCC warranties.No warranties, representations, promises, or oral statementshave been made by any representative of Duro-Last, andowner is not to rely on same unless added to the warranty inwriting. (See Special Features / Conditions.)10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No No express exclusionNeutral (no provision) Neutral (no provision) Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 13, 17, 19, 20, 22 1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 13, 17, 19, 20, 221, 2, 3, 4, 6, 10, 12, 14, 16, 18, 24. Warranty also excludesdamages caused by chemicals not normally found in nature.[Duro-Last indicates warranty covers damage caused by oils,wax, grease, animal fats, and acids.]13. Wind coverage/exclusions Warranty excludes wind and hurricanes. Dibiten indicatesthat there is no coverage for damage caused by wind.Warranty excludes wind and hurricanes. Dibiten indicates thatthere is no coverage for damage caused by wind.Warranty excludes gales, hurricanes, and tornadoes.[Duro-Last does not indicate wind speeds covered bywarranty.]14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, F, H, I, M, R C, F, H, I, M, R A, C, G, I594

15. Cost to obtain None None None16. Minimum charge None None None17. Ineligible structure or building use Structures used for cool or cold storageStructures used for cool or cold storagePorch, sun deck, garage, storage shed, or single-familyresidence of less than 1,000 square feet.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsNone None NoneYes Yes Yes20. Job inspection policy No on-site inspectionsNo on-site inspectionsDuro-Last quality assurance specialist makes on-siteinspection after application prior to issuance of warranty; nocharge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionNone; material-only warrantyNo; Dibiten indicates that it does not carry insurancecovering its warranty obligations.None; material-only warrantyNo; Dibiten indicates that it does not carry insurance covering itswarranty obligations.Contractor obligated to make repairs to workmanshipdeficiencies for two years.No; Duro-Last indicates that it carries $12 million liabilityinsurance coverage.Dibiten manufactures and sells product. Dibiten manufactures and sells product. Duro-Last fabricates and sells product.No renewal provision No renewal provision No renewal provision25. Assignability No restrictions stated No restrictions stated Assignable with written permission of Duro-Last, Inc.26. Special features/conditions In order to continue limited warranty coverage, owner mustimplement a maintenance program prescribed by Dibitenon the reverse side of limited warranty, including repair ofany item beyond the scope of the warranty which wouldaffect the integrity of the Dibiten membrane and recoatingsmooth surfaced membranes as necessary and: (a)maintaining a file showing proof-of-purchase, allinspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairingdamaged masonry, poorly mounted counter-flashing, loosecaulking, bad mortar joints, and any loose stone or tilecoping that abut the roof; (f) correcting materials at edgesof the roof that have been lifted by wind by an approvedcontractor; (g) examining roof top equipment to determineif they move excessively or leak; (h) checking buildingexterior for settlement or movement; and (i) recoating anyareas of excessive wear, flaking, or blistered areas ofprotective coatings.Installing roofing contractor must be licensedby and in good standing with the licensing authority of thejurisdiction in which the structure is located.Region 2 excludes CA, NV, AZ, UT, ID, NM, TX,HI, FL.27. Executed by owner Registration form must be completed and returned toDibiten within 30 days of completion of the Dibitenmembrane and a copy of the contractor's bill must beattached.In order to continue limited warranty coverage, owner mustimplement a maintenance program prescribed by Dibiten on thereverse side of limited warranty, including repair of any itembeyond the scope of the warranty which would affect the integrityof the Dibiten membrane and recoating smooth surfacedmembranes as necessary and: (a) maintaining a file showingproof-of-purchase, all inspections and repairs; (b) inspecting roofat least semiannually; (c) removing any debris; (d) cleaninggutters, downspouts, drains, and surrounding areas; (e) repairingdamaged masonry, poorly mounted counter-flashing, loosecaulking, bad mortar joints, and any loose stone or tile coping thatabut the roof; (f) correcting materials at edges of the roof that havebeen lifted by wind by an approved contractor; (g) examining rooftop equipment to determine if they move excessively or leak; (h)checking building exterior for settlement or movement; and (i)recoating any areas of excessive wear, flaking, or blistered areasof protective coatings.Installing roofing contractor must be licensedby and in good standing with the licensing authority of thejurisdiction in which the structure is located.Region 2 excludes CA, NV, AZ, UT, ID, NM, TX,HI, FL.Registration form must be completed and returned to Dibitenwithin 30 days of completion of the Dibiten membrane and a copyof the contractor's bill must be attached.Owner's failure to comply with the terms and limitations in thelimited warranty releases Duro-Last from any liability. Allinterpretations of this warranty shall be considered that theirform, execution, and validity thereof shall be controlled by thelaws of the state of Michigan. Duro-Last Αdoes not waive anyrights under this limited warranty if it does not enforce thelimitations.≅ Oral representations cannot be relied upon ascorrectly stating the representations of Duro-Last, Inc.Yes595

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Duro-Last <strong>Roofing</strong>, Inc. Ensurco Duradek Limited Ensurco Duradek Limited2. Title, original publication date, andidentifying symbol, if anyΑ15 Year Residential Material Warranty≅; March 1993; DL15-01 Rev. 3/93Ensurco Duradek Warranty;≅ September 1995 ΑEnsurco Duradek Warranty;≅ September 19953. Product, specification, or systemcoveredDuro-Last <strong>Roofing</strong> SystemDuradek ΑUltra Series 60 mil products (See SpecialFeatures/Conditions)Duradek Classic, Custom, Supreme, Decor, SafetyDek,Reflections, Ultra, Marble, Commercial, SurcoSeal 60,SurcoSeal 40 (See Special Features/Conditions)4. Scope of coverage Material only; Duro-Last grants a material-only warranty tothe owner of a building with a roof on a porch, sun deck,garage, storage shed, or single-family residence andinstalled by an authorized dealer/ contractor that the Duro-Last membrane material and accessories will be free frommanufacturing defects at the time of delivery and themembrane material and accessories will not becomedefective within the term of the warranty. Warranty doesnot extend to color.Material only; Ensurco Duradek guarantees to repair or replace at itsexpense any portion of the Duradek Vinyl decking membrane whichleaks due to a manufacturing defect.Material only; Ensurco Duradek guarantees to repair orreplace at its expense any portion of the Duradek Vinyldecking membrane which leaks due to a manufacturingdefect5. Length of coverage 15 years 10 years 5 years6. Nature of remedy Should a defect occur in the membrane material oraccessories within the warranty, Duro-Last's liability limitedsolely to provide the materials necessary to make therepairs.Ensurco Duradek agrees to repair or replace the Duradek membranewith the same (or similar) color design or grade of material and paytransportation costs and all other costs necessary to remedy failureEnsurco Duradek agrees to repair or replace the Duradekmembrane with the same (or similar) color design orgrade of material and pay transportation costs and allother costs necessary to remedy failure.7. Monetary limitations None stated. None stated None stated8. Notification requirements Written notification to Duro-Last's corporate headquarters,525 Morley Drive, Saginaw, MI 48601, within 30 days afterdiscovery of any defective material.Written notice to Applicator promptly upon discovery of any neededrepairs.Written notice to Applicator promptly upon discovery ofany needed repairs.9. Exclusive or additional remedy Warranty is owner's sole and exclusive remedies for failureof the roofing membrane material or accessories; excludesUCC warranties. (See Special Features/Conditions.)10. Inclusion of consequentialdamagesRemedies provided in warranty state the limit of Ensurco=sresponsibilities; seeks to exclude UCC warranties. No representativehas authority to make any representations other than those stated inwarranty.No No NoRemedies provided in warranty state the limit ofEnsurco=s responsibilities; seeks to exclude UCCwarranties. No representative has authority to make anyrepresentations other than those states in warranty.11. Determination of warrantyapplicabilityNeutral (no provision) Neutral (no provision) Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 3, 18. Warranty also excludes damages caused bychemicals not normally found in nature.1, 2, 3, 5, 6, 10, 11, 22 (Warranty also excludes normal wear and tearand failure of the structure to provide an adequate means ofwaterproofing)1, 2, 3, 5, 6, 10, 11, 22 (Warranty also excludes normalwear and tear and failure of the structure to provide anadequate means of waterproofing)13. Wind coverage/exclusions No coverage for damage caused by wind No coverage for damage caused by wind14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)A, C, I C C15. Cost to obtain None None None16. Minimum charge None None None17. Ineligible structure or building use None None None596

18. Pre-construction notice andapproval requirementsNone requiredApplicator required to obtain approval prior to beginning installation fromlocal distributor who acts as agent for manufacturer=s approval.Applicator required to obtain approval prior to beginninginstallation from local distributor who acts as agent formanufacturer s approval.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy No on-site inspections No on-site inspections No on-site inspections21. Contractor’s post-installationobligationAlthough this is a material-only warranty, contractorobligated to make repairs to workmanship deficiencies fortwo years.Contractor obligated to make repairs to all leaks, any defects, andmaterial and workmanship deficiencies for 10-year duration of warranty.Applicator obligated to make repairs to all leaks, anydefects, and material and workmanship deficiencies for 5-years duration of warranty.22. Backed by named insurance orsuretyNo; Duro-Last indicates that it does not carry insurancecovering its warranty obligations.No; Ensurco indicates that it carries $2 million liability insurancecoverageNo; Ensurco indicates that it carries $2 million liabilityinsurance coverage23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionDuro-Last manufactures and sells product. Ensurco Duradek manufacturers and sells product Ensurco Duradek manufacturers and sells productNo renewal provision No renewal provision No renewal provision25. Assignability No restrictions stated. No restricitons stated No restrictions stated26. Special features/conditions All interpretations of this warranty shall be considered thattheir form, execution, and validity thereof shall becontrolled by the laws of the state of Michigan. Oralrepresentations cannot be relied upon as correctly statingthe representations of Duro-Last <strong>Roofing</strong>, Inc.Proof of purchase and payment must be presented to obtain warrantycoverage.Each Duradek system requires a sealant (caulking) in a number ofareas. The sealant is subject to annual inspection and maintenance bythe building owner. Neither Ensurco nor the Contractor are responsiblefor damages occurring from repairs necessary due to problems arisingfrom the sealant after the first complete year of installation. Ensurco orthe Contractor will provide, at a nominal cost, the correct sealants tomaintain the job.Warranty is offered by both Ensurco and a ΑMedallion Level≅ certifiedapplicator only. Ensurco is responsible for any materials relatedproblems and the Contractor is responsible for workmanship. In eithercase, the application contractor will facilitate any necessary repairs.Proof of purchase and payment must be presented toobtain warranty coverage.Each Duradek system requires a sealant (caulking) in anumber of areas. The sealant is subject to annualinspection and maintenance by the building owner.Neither Ensurco nor the Applicator are responsible fordamages occurring from repairs necessary due toproblems arising from the sealant after the first completeyear of installation. Ensurco or the Applicator will provide,at a nominal cost, the correct sealants to maintain the job.Warranty is offered by both Ensurco and the installationcompany. Ensurco is responsible for any materialsrelated problems and the dealer is responsible forworkmanship. In either case, the installing contractor willfacilitate any necessary repairs.27. Executed by owner Yes No No597

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Elastomeric <strong>Roofing</strong> Systems, Inc. Elastomeric <strong>Roofing</strong> Systems, Inc. Elastomeric <strong>Roofing</strong> Systems, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered"ERSystems ____ Year EPDM Membrane MaterialWarranty"; October 1, 1996; 961001 MMW.045 and .060 black nonreinforced EPDM, .045 and .060black FR EPDM, reinforced 90, Poly-Bond; plate bond,fully adhered, ballasted, batten and Poly-Bond systems"ERSystems ____ Year Permaweld CPA MaterialWarranty"; October 1, 1996; 961001 PMMW"ERSystems _____ Year EPDM Roof SystemWarranty"; October 1, 1996; 961001 RSWPermaweld, Permaweld Fleece Backed, PermaVac systems .045 and .060 black nonreinforced EPDM; .045 and .060black FR EPDM; reinforced 90, plate bond, fullyadhered, ballasted, batten.4. Scope of coverage Material only; ERSystems warrants that the roofingmembrane is free from manufacturing defects at the timethe material is delivered and that the product will notprematurely deteriorate to the point of failure due toweathering if properly installed, maintained, and used forthe purpose for which the membrane is intended.Warranty covers the membrane only and does not coveradhesives, sealants, flashings, seams, coatings,accessories, or workmanship.5. Length of coverage 5 or 10 years: Poly-Bond; 5, 10, or 15 years: .045 and .060black nonreinforced EPDM, .045 and .060 black FREPDM, reinforced 906. Nature of remedy If the product shows premature deterioration due toweathering, ERSystems liability is limited, at ERSystemsoption, to provide the repair material for the originalproduct or credit toward the purchase of new membrane torepair the leak.7. Monetary limitations The maximum value allowed by ERSystems for the repairor credit shall not exceed the original product purchaseprice.Material only; ERSystems warrants that the roofing membrane is freefrom manufacturing defects at the time the material is delivered and thatthe product will not prematurely deteriorate to the point of failure due toweathering if properly installed, maintained, and used for the purpose forwhich the membrane is intended. Warranty covers the membrane onlyand does not cover adhesives, sealants, flashings, seams, coatings,accessories, or workmanship.Material and workmanship; ERSystems warrants torepair or cause to be repaired any leak in the membranesystem caused by premature deterioration due toweathering or a defect in the ERSystems materials or inthe workmanship of installing the system. The system isdefined as the elastomeric membrane, adhesives,sealants, flashing membrane, fasteners and insulationsupplied by ERSystems. All materials not supplied byERSystems must be approved in writing by ERSystems.5, 10, or 15 years 5 or 10 years: Poly-Bond; 5, 10, or 15 years: .045 and.060 black nonreinforced EPDM, .045 and .060 black FREPDM, reinforced 90If the product shows premature deterioration due to weathering,ERSystems liability is limited, at ERSystems option, to provide the repairmaterial for the original product or credit toward the purchase of newmembrane to repair the leak.The maximum value allowed by ERSystems for the repair or credit shallnot exceed the original product purchase price.The owner's remedies and ERSystems' liability is limitedto the cost of repair of the leaks in the system.None stated.8. Notification requirements The buyer must notify ERSystems by registered mail,return receipt requested, at 50 Medina Street, Loretto, MN55357-0056, within 30 days of discovery of the failure.9. Exclusive or additional remedy The warranty is exclusive and in lieu of any otherwarranties; ERSystems shall have no further obligation orliability of any kind. ERSystems' sales personnel are notauthorized to make warranties; ERSystems' employees'oral statements do not constitute warranties and shall notbe relied upon; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)The buyer must notify ERSystems by registered mail, return receiptrequested, at 50 Medina Street, Loretto, MN 55357-0056, within 30 daysof discovery of the failure.The warranty is exclusive and in lieu of any other warranties;ERSystems shall have no further obligation or liability of any kind.ERSystems' sales personnel are not authorized to make warranties;ERSystems' employees' oral statements do not constitute warrantiesand shall not be relied upon; excludes UCC warranties.No No NoERSystems' determination ERSystems' determination ERSystems' determination1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 16, 17, 18, 20, 22, 23.Warranty also specifically excludes damages caused byatomic radiation, insects or animals, and Specific ConditionP.1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 16, 17, 18, 20, 22, 23. Warranty alsospecifically excludes damages caused by atomic radiation, insects oranimals, and specific Condition P.The buyer must notify ERSystems by registered mail,return receipt requested, at 50 Medina Street, Loretto,MN 55357-0056, within 30 days of discovery of thefailure.The warranty is exclusive and in lieu of any otherwarranties; ERSystems shall have no further obligationor liability of any kind. ERSystems' sales personnel arenot authorized to make warranties; ERSystems'employees' oral statements do not constitute warrantiesand shall not be relied upon; excludes UCC warranties.1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 16, 17, 18, 20, 22, 23.Warranty also specifically excludes damagescaused by atomic radiation, insects or animals,and specific Condition P.13. Wind coverage/exclusions The warranty covers roof damage resulting from windspeeds up to 55 mph. The warranty excludes gales(exceeding 55 mph) and tornadoes.The warranty covers roof damage resulting from wind speeds up to 55mph. Warranty excludes gales (exceeding 55 mph) and tornadoes.The warranty covers roof damage resulting from windspeeds up to 55 mph. Warranty excludes gales(exceeding 55 mph) and tornadoes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, M, S (See Special Features/Conditions.) C, M, S (See Special Features/Conditions.) C, M, S (See Special Features/Conditions.)598

15. Cost to obtain5 years: $50; 10 years: $75; 15 years: $2.00/square5 years: $50; 10 years: $75; 15 years: $2.00/square 5 years: $8.00/square; 10 years: $11.00/square; 15years: $15.00/square16. Minimum charge 5 years: $50; 10 years: $75; 15 years: $100 5 years: $50; 10 years: $75; 15 years: $100 5 years: $600; 10 years: $800; 15 years: $1,00017. Ineligible structure or building use Cold-storage buildings, single-family residences, andspecial-purpose facilities.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsERSystems must receive a completed warranty prenotificationform prior to the start of the project. Allwarranty requests require approval in advance of startingthe project. Any deviations from ER Systems' publishedspecifications must be approved in writing prior to job start.Cold-storage buildings, single-family residences, and special purposefacilitiesERSystems must receive a completed warranty pre-notification formprior to the start of the project. All warranty requests require approval inadvance of starting the project. Any deviations from ER Systems'published specifications must be approved in writing prior to job start.Yes Yes Yes20. Job inspection policy ERSystems technical support representative makesinspections during application depending on size andcomplexity of job and qualifications of contractor, and aftercompletion prior to issuance of warranty as well as two yearsafter issuance of warranty; no charge for initial warranty;charge for subsequent inspection if job does not passinspection. ERSystems reserves the right to require a pre-jobinspection.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionERSystems technical support representative makes inspections duringapplication depending on size and complexity of job and qualifications ofcontractor, and after completion prior to issuance of warranty as well as twoyears after issuance of warranty; no charge for initial warranty; charge forsubsequent inspection if job does not pass inspection. ERSystems reservesthe right to require a pre-job inspection.Cold-storage buildings, single-family residences, andspecial purpose facilitiesERSystems must receive a completed warranty prenotificationform prior to the start of the project. Allwarranty requests require approval in advance of startingthe project. Any deviations from ER Systems' publishedspecifications must be approved in writing prior to jobstart.ERSystems technical support representative makesinspections during application depending on size andcomplexity of job and qualifications of contractor, and aftercompletion prior to issuance of warranty as well as two yearsafter issuance of warranty; no charge for initial warranty;charge for subsequent inspection if job does not passinspection. ERSystems reserves the right to require a prejobinspection.None; material-only warranty. None; material-only warranty The contractor is obligated to make repairs toworkmanship deficiencies for two years.No; ERSystems indicates that it carries a $2.5 millionproduct liability insurance covering its warranty obligations.No; ERSystems indicates that it carries a $2.5 million product liabilityinsurance covering its warranty obligations.No; ERSystems indicates that it carries a $2.5 millionproduct liability insurance covering its warranty obligations.ERSystems sells product only. ERSystems sells product only. ERSystems sells product only.No renewal provision No renewal provision No renewal provision25. Assignability Warranty is transferable subject to the terms ofERSystems' inspection, written approval, and payment ofthe current transfer fee, solely at the discretion ofERSystems.The warranty is transferable subject to the terms of ERSystems'inspection, written approval, and payment of the current transfer fee,solely at the discretion of ERSystems.The warranty is transferable subject to the terms of ERSystems'inspection, written approval, and payment of thecurrent transfer fee, solely at the discretion of ERSystems.26. Special features/conditions If ERSystems determines the cause of a reported leak tobe outside the scope of the warranty, inspection and repaircosts shall be paid by the owner; failure of owner to pay fornon-warranted repairs within 30 days of notification shallrender the warranty null and void.The warranty shall be governed and construed inaccordance with the laws of the state of Minnesota. Thecourts of Minnesota shall have exclusive jurisdiction overall disputes arising out of warranty.Any action for breach of the contract or warranty,except for nonpayment by buyer, must be commencedwithin one year after the cause of action occurs, and allactions shall be barred after such time. The warrantystates that it is agreed and understood that the price for thesystem is consideration for the limitation of ERSystemsliability stated in warranty.If ERSystems determines the cause of a reported leak to be outside thescope of the warranty, inspection and repair costs shall be paid by theowner; failure of owner to pay for nonwarranted repairs within 30 days ofnotification shall render the warranty null and void.The warranty shall be governed and construed in accordance withthe laws of the state of Minnesota. The courts of Minnesota shall haveexclusive jurisdiction over all disputes arising out of warranty.Any action for breach of the contract or warranty, except for nonpaymentby buyer, must be commenced within one year after the cause of actionoccurs, and all actions shall be barred after such time. Warranty statesthat it is agreed and understood that the price for the system isconsideration for the limitation of ERSystems liability stated in warranty.If ERSystems determines the cause of a reported leak to beoutside the scope of the warranty, inspection and repair costsshall be paid by the owner; failure of owner to pay fornonwarranted repairs within 30 days of notification shallrender the warranty null and void.The warranty shall be governed and construed inaccordance with the laws of the state of Minnesota. Thecourts of Minnesota shall have exclusive jurisdiction over alldisputes arising out of warranty.Any action for breach of the contract or warranty, exceptfor nonpayment by buyer, must becommenced within one year after the cause of action occurs,and all actions shall be barred after such time. Warrantystates that it is agreed and understood that the price for thesystem is consideration for the limitation of ERSystemsliability stated in warranty.27. Executed by owner Yes Yes Yes599

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply1. Identity of issuing entityFirestone Building Products Company,division of Bridgestone/Firestone, Inc.Firestone Building Products Company,division of Bridgestone/Firestone, Inc.Firestone Building Products Company,division of Bridgestone/Firestone, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑFirestone 10-Year EPDM/Ultraply 78+ MembraneLimited Warranty≅; August 1994; 8/94ΧItem #916R-01Firestone Rubbergard EPDM, Firestone UltraPly4. Scope of coverage Material only; Firestone warrants that it will providereplacement membrane materials sufficient to replace anyarea of EPDM or UltraPly roofing membrane which leaksas a result of ordinary exposure to the elements ormanufacturing defect in the membrane. Warranty doesnot cover flashings, seams, adhesives, sealants, coatings,or workmanship.Red Shield "<strong>Roofing</strong> System Limited Warranty;" November 1997; 11/97 -Item #811-01Firestone RubberGard EPDM Systems, Firestone UltraPly 78+ Systems,Firestone APP Systems, Firestone SBS Systems, Firestone Built-upSystemsMaterial and workmanship; Firestone warrants to repair any leak in theFirestone roofing system. The Firestone roof system is limited toFirestone-brand membranes, Firestone- brand insulations, and otherFirestone-brand accessories when installed in accordance with Firestonetechnical specifications. Firestone indicates that roof coatings andsealants, specifically Firestone PC 100 AcryliTop Coating, AluminumRoof Coating, S-10 Pourable Sealer and <strong>General</strong> Purpose Sealant, arenot covered under this warrantyFirestone "Modified Bitumen Membrane LimitedWarranty;" November 1997; 11/97 Item # 595(R)MB(Replaces 7/94)-01Firestone APP, Firestone SBSMaterial only; Firestone warrants that it will repair anyleak caused by weathering of the Firestone modifiedbitumen roofing membrane as a result of ordinaryexposure to the elements or any manufacturing defect inthe membrane. Warranty does not cover flashings,seams, adhesives, sealant, coatings, or workmanship.5. Length of coverage 10 years 5, 10, 15, or 20 years: Firestone EPDM; 5, 10, or 15 years:UltraPly 78+; 5, 10, 12, 15, or 20 years: Firestone SBS; 5, 10, 12, 15, or 20 years: FirestoneAPP6. Nature of remedy The owner's sole and exclusive remedy and Firestone'sliability shall be limited to the repair of the leak.7. Monetary limitations Firestone's replacement obligations over the life of thewarranty are limited to the original cost of the membrane.8. Notification requirements Written notification within 30 days of any occurrence of aleak9. Exclusive or additional remedy Warranty is owner's sole and exclusive remedy againstFirestone; warranty supersedes and is in lieu of all otherwarranties or guarantees; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)The owner's sole and exclusive remedy and Firestone's liablity shall belimited to the repair of the leak.None stated.Written notification within 30 days of any occurrence of a leakWarranty is owner's sole and exclusive remedy against Firestone;warranty supersedes and is in lieu of all other warranties or guarantees;excludes UCC warranties.No No No5, 10, or 12 yearsFirestone's determination Firestone's determination Firestone's determination1, 2, 3, 6, 7, 8, 10, 12 (see Special Features/Conditions), 13, 17, 18, 22. Warranty also specificallyexcludes damages caused by atomic radiation, insects, oranimals, and Specific Condition H.1, 2, 3, 6, 7, 8, 10, 12 (see Special Features/Conditions), 13, 17, 18, 22.Warranty also specifically excludes damages caused by atomic radiation,insects, or animals and Specific Condition H.The owner's sole and exclusive remedy and Firestone'sliability shall be limited to the repair of the leak.Firestone's repair obligations over the life of the warrantyare limited to the original cost of the membraneinstallation.Written notification within 30 days of any occurrence of aleakWarranty is owner's sole and exclusive remedy againstFirestone; warranty supersedes and is in lieu of all otherwarranties or guarantees; excludes UCC warranties.1, 2, 3, 6, 7, 8, 10, 11, 12 (see SpecialFeatures/Conditions), 13, 17, 18, 22. Warranty alsospecifically excludes damages caused by atomicradiation, insects, or animals and Specific Condition H.13. Wind coverage/exclusions Warranty excludes winds, hurricanes, and tornadoes.Firestone indicates that there is no coverage for damagecaused by wind.Warranty excludes winds in excess of 55 mph, hurricanes, andtornadoes. Firestone indicates that warranty covers roof damageresulting from wind speeds up to 55 mph.Warranty excludes winds, hurricanes, and tornadoes.Firestone indicates that there is no coverage fordamaged caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)M, S (See Special Features/Conditions.) C, M, S (See Special Features Conditions.) M, S (See Special Features/Conditions.)15. Cost to obtain $50 Firestone EPDM: 5 years: $3.00/square; 10 years: $5.00/square; 15 years: $8.00/ square; 20years: $10.00/square; (warranty price is reduced $1.00/square for using nonreinforcedmembrane with the exception of 20-year term.)UltraPly: 5 years: $3.00/square; 10 years: $5.00/square; 15 years: $8.00/square;Firestone APP (without roof monitoring): 5 years: $3.00/square; 10 years: $7.00/square; 12years: $9.00/square; 15 years: $12.00/square; 20 years: $17.00/square;Firestone SBS (without roof monitoring): 5 years: $3.00/square; 10 years: $7.00/square; 12years: $9.00/square; 15 years: $12.00/square; 20 years:$17.00/square;Firestone Built-up (without roof monitoring): 5 years: $3.00/square; 10 years: $7.00/square;12 years: $9.00/square; 15 years: $12.00/square; 20 years: $17.00/square; (warranty price forAPP, SBS, and built-up systems are reduced when roof monitoring is employed16. Minimum charge $50 Varies from $250 to $750 depending on length of coverage 300$50.00600

17. Ineligible structure or building use Single-family residence, patio, plaza deck, roofs outside ofU.S. and CanadaSingle-family residence, patio, plaza deck, roofs outside of U.S. andCanadaSingle-family residence, patio, plaza deck, roofs outsideof U.S. and Canada18. Pre-construction notice andapproval requirementsPreinstallation notice must be submitted 14 days prior tojob start.Preinstallation notice must be submitted 14 days prior to job start andmust be approved by Firestone technical service.Contractor must submit Αapplication for warranty≅certifying that the membrane has been installed inaccordance with Firestone technical specifications.19. Approved, authorized, or licensedrequirements20. Job inspection policy No on-site inspectionsYes Yes YesFirestone field technical representative makes on-site inspection aftercompletion and prior to issuance of warranty; no chargeNo on-site inspections21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextension25. AssignabilityAlthough this is a material-only warranty, contractor isobligated to make repairs to workmanship deficiencies fortwo years.Contractor obligated to repair workmanship deficiencies for two years.Although this is a material-only warranty, contractor isobligated to make repairs to workmanship deficienciesfor two years.No; Firestone indicates that it is self-insured. No; Firestone indicates that it is self-insured. No; Firestone indicates that it is self-insured.Firestone manufactures and sells the product. Firestone manufactures and sells the product. Firestone manufactures and sells the product.No renewal provision No arenewal provision No renewal provisionWarranty is transferable subject to Firestone inspection,written approval, and payment of current transfer fee.Warranty is transferable subject to Firestone inspection, written approval,and payment of current transfer fee.Warranty is transferable subject to Firestone inspection,written approval, and payment of current transfer fee.26. Special features/conditions If Firestone's investigation reveals that the cause of a leak isoutside the scope of the warranty, investigation costs shall be paidby purchaser; failure of purchaser to pay these costs shall renderthe warranty null and void. Any dispute, controversy, or claimbetween the purchaser and Firestone concerning warranty shallbe settled by final and binding arbitration in accordance with theAmerican Arbitration <strong>Association</strong>'s rules for the constructionindustry. Warranty shall be governed and construed inaccordance with the laws of the state of Indiana without regard toconflict of laws.Firestone does not undertake any analysis of the architectureor engineering required to evaluate what type of roof system isappropriate. Warranty cannot be amended, altered, or modified inany way except in writing signed by the president of Firestone or aperson to whom his authority has been delegated in writing.Warranty requires purchaser compliance with Firestoneroofing care and maintenance requirements stated on reverse sideof warranty document, including at least twice yearly inspections;ponding water not be allowed; drain areas remain clear; noexposure to acids, solvents, greases, oil, fats, chemicals, and thelike; protective walkways for roof traffic; maintenance of counterflashings, metal work, drains, skylights, equipment curbs andsupports, other rooftop accessories, and roof coatings andsealants.In the event the roof access is limited due to security or otherrestrictions, purchaser shall reimburse Firestone for all reasonablecosts incurred during inspection and/or repair of the system whichare due to delays associated with said restrictions. Purchasershall be responsible for the removal and replacement of anyoverburdens, superstrata or overlays, either permanent ortemporary, as necessary to expose the surface of the membranefor inspection and/or repair.If Firestone's investigation reveals that the cause of a leak is excluded underthe warranty, investigation costs shall be paid by owner; failure of owner topay these costs shall render the warranty null and void. Any dispute,controversy, or claim between the owner and Firestone concerning warrantyshall be settled by final and binding arbitration in accordance with theAmerican Arbitration <strong>Association</strong>'s rules for the construction industry.Warranty shall be governed and construed in accordance with the laws of thestate of Indiana without regard to conflict of laws.Firestone does not undertake any analysis of the architecture orengineering required to evaluate what type of roof system is appropriate.Warranty cannot be amended, altered, or modified in any way except in writingsigned by the president of Firestone or a person to whom his authority hasbeen delegated in writing.Warranty requires owner compliance with Firestone roofing care andmaintenance requirements stated on reverse side of warranty document,including at least twice yearly inspections; ponding water not be allowed; drainareas remain clear; no exposure to acids, solvents, greases, oil, fats,chemicals, and the like; protective walkways for roof traffic; maintenance ofcounter flashings, metal work, drains, skylights, equipment curbs and supports,other rooftop accessories, and roof coatings and sealants.In the event the roof access is limited due to security or other restrictions,the owner shall reimburse Firestone for all reasonable costs incurred duringinspection and/or repair of the system that are due to delays associated withsaid restrictions. The owner shall be responsible for the removal andreplacement of any overburdens, superstrata or overlays, either permanent ortemporary, excluding accepted stone ballast or pavers, as necessary toexpose the system for inspection and/or repair.If Firestone's investigation reveals that the cause of a leak isoutside the scope of the warranty, investigation costs shall bepaid by owner; failure of owner to pay these costs shall render thewarranty null and void. Any dispute, controversy, or claimbetween the owner and Firestone concerning warranty shall besettled by final and binding arbitration in accordance with theAmerican Arbitration <strong>Association</strong>'s rules for the constructionindustry. Warranty shall be governed and construed inaccordance with the laws of the state of Indiana without regard toconflict of laws.Firestone does not undertake any analysis of the architectureor engineering required to evaluate what type of roof system isappropriate. Warranty cannot be amended, altered, or modifiedin any way except in writing signed by the president of Firestoneor a person to whom his authority has been delegated in writing.Warranty requires owner compliance with Firestone roofingcare and maintenance requirements stated on reverse side ofwarranty document, including at least twice yearly inspections;ponding water not be allowed; drain areas remain clear; noexposure to acids, solvents, greases, oil, fats, chemicals, and thelike; protective walkways for roof traffic; maintenance of counterflashings, metal work, drains, skylights, equipment curbs andsupports, other rooftop accessories, and roof coatings andsealants.In the event the roof access is limited due to security or otherrestrictions, the owner shall reimburse Firestone for allreasonable costs incurred during inspection and/or repair of thesystem which are due to delays associated with said restrictions.The owner shall be responsible for the removal and replacementof any overburdens, superstrata or overlays, either permanent ortemporary, as necessary to expose the system for inspectionand/or repair.27. Executed by owner NoNoNo601

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredFirestone Building Products Company,division of Bridgestone/Firestone, Inc.Firestone Modified Bitumen Product Limited Warranty;September 1997; 9/97Item #913MB (Replaced 2/96)-01Firestone Building Products Company,division of Bridgestone/Firestone, Inc.ΑFirestone Protected Membrane Limited Warranty≅; August 1994;8/94ΧItem #915R-01Firestone Building Products Company,division of Bridgestone/Firestone, Inc.Firestone ΑModified Bitumen Standard Roof SystemLimited Warranty≅; January 1996; 1/96ΧItem #558(R)MB(Replaces 7/94)-01Firestone APP 160, 170, 180, Firestone SBS Firestone Rubbergard EPDM, Firestone Protected Membrane System Firestone APP Systems, Firestone SBS Systems4. Scope of coverage Material only; Firestone warrants that it will provide replacementmembrane material or a prorated credit (based upon the remainingmonths of the unexpired warranty) sufficient to replace any area ofFirestone modified bitumen membrane that leaks as a result ofordinary exposure to the elements or any manufacturing defect inthe membrane. Warranty does not cover flashings, seams,adhesives, sealants, coatings, or workmanship.Material only; Firestone warrants that it will provide replacementmembrane material sufficient to replace any area of Firestone EPDMmembrane that leaks as a result of ordinary exposure to the elements orany manufacturing defect in the membrane. Warranty does not coverflashings, seams, adhesives, sealants, coatings, or workmanship.Firestone warrants that it will repair any leak in theFirestone modified bitumen roofing system. TheFirestone System is limited to mean Firestone-brandmembranes, Firestone- brand insulation, and otherFirestone-brand accessories when installed inaccordance with Firestone technical specifications.5. Length of coverage 10 years: Firestone APP 160 or 170 (smooth surfaced), FirestoneSBS (granule surfaced); 12 years: Firestone APP 160 or 170(smooth surfaced) with approved field-applied roof coating,Firestone APP 180 (granule surfaced), Firestone SBS (granulesurfaced) installed over a hot asphalt attached base sheet.10 years 5, 10, or 12 years6. Nature of remedy Purchaser's sole and exclusive remedy and Firestone's liabilityshall be limited either to the supply of replacement membranematerial sufficient to cover or replace the deteriorated membranearea or a prorated credit (based on the number of remaining monthsof the unexpired warranty) to be applied towards the purchase ofthe new membrane material.The owner's sole and exclusive remedy and Firestone's liability shall belimited to the repair of the leak.The owner's sole and exclusive remedy and Firestone'sliability shall be limited to the repair of the leak.7. Monetary limitations Firestone's replacement obligations over the life of the warranty arelimited to the original cost of the membrane.Firestone's replacement obligations over the life of the warranty arelimited to the original cost of the membrane.Firestone's repair obligation over the life of the warrantyis limited to the original cost of the system installation.8. Notification requirements Written notification within 30 days of any occurrence of a leak. Written notification within 30 days of any occurrence of a leak Written notification within 30 days of any occurrence of aleak9. Exclusive or additional remedy The warranty is purchaser's sole and exclusive remedy againstFirestone; warranty supersedes and is in lieu of all other warrantiesor guarantees; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Warranty is owner's sole and exclusive remedy against Firestone;warranty supersedes and is in lieu of all other warranties or guarantees;excludes UCC warranties.No No NoFirestone's determination Firestone's determination Firestone's determination1, 2, 3, 6, 7, 8, 10, 11, 12 (see Special Features/Conditions), 13,17, 18, 22. The warranty also specifically excludes damagescaused by atomic radiation, insects, or animals, and SpecificCondition H.13. Wind coverage/exclusions The warranty excludes winds, hurricanes, and tornadoes. Firestoneindicates that there is no coverage for damage caused by wind.1, 2, 3, 6, 7, 8, 10, 12 (see Special Features/Conditions), 13, 17, 18, 22. Warranty also specifically excludesdamages caused by atomic radiation, insects, or animals, and SpecificCondition H.Warranty excludes winds, hurricanes, and tornadoes. Firestoneindicates that there is no coverage for damage caused by wind.Warranty is owner's sole and exclusive remedy againstFirestone; warranty supersedes and is in lieu of all otherwarranties or guarantees; excludes UCC warranties.1, 2, 3, 6, 7, 8, 10, 11, 12 (see SpecialFeatures/Conditions), 13, 17, 18, 22. Warranty alsospecifically excludes damages caused by atomicradiation, insects, or animals and Specific Condition H.Warranty excludes winds, hurricanes, and tornadoes.Firestone indicates that there is no coverage fordamaged caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)M, S (See Special Features/Conditions.) C, M, S (See Special Features/Conditions.) C, M, S (See Special Features/Conditions.)15. Cost to obtain None $200 5 years: $3.00/square; 10 years: $5.00/square; 12 years:$6.00/square16. Minimum charge None $200 5 yrs: $300/sq; 10 yrs: $350/sq; 12 yrs: $400/sq602

17. Ineligible structure or building use Single-family residence, patio, plaza deck, roofs outside of U.S. andCanada.Single-family residence, patio, plaza deck, roofs outside of U.S. andCanadaSingle-family residence, patio, plaza deck, roofs outsideof U.S. and Canada18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsNone required. Preinstallation notice must be submitted 14 days prior to job start. Preinstallation notice must be submitted 14 days prior tojob start and must be approved by Firestone technicalservice.No Yes Yes20. Job inspection policy No on-site inspections No on-site inspections Firestone field technical representative makes on-site inspectionafter job completion prior to issuance of warranty; no charge.21. Contractor’s post-installationobligationNone required.Contractor obligated to make repairs to workmanship deficiencies fortwo years.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionNo; Firestone indicates that it is self-insured. No; Firestone indicates that it is self-insured. No; Firestone indicates that it is self-insured.Firestone manufactures and sells the product. Firestone manufactures and sells the product. Firestone manufactures and sells the product.No renewal provision No renewal provision No renewal provision25. Assignability Warranty is transferable subject to Firestone inspection, written approval,and payment of current transfer fee.26. Special features/conditions If Firestone's investigation reveals that the cause of a leak isoutside the scope of the warranty, investigation costs shall be paidby purchaser; failure of purchaser to pay these costs shall renderthe warranty null and void. Any dispute, controversy, or claimbetween the purchaser and Firestone concerning warranty shall besettled by final and binding arbitration in accordance with theAmerican Arbitration <strong>Association</strong>'s rules for the constructionindustry. Warranty shall be governed and construed in accordancewith the laws of the state of Ind. without regard to conflict of laws.Firestone does not undertake any analysis of the architecture orengineering required to evaluate what type of roof system isappropriate. Warranty cannot be amended, altered, or modified inany way except in writing signed by the president of Firestone or aperson to whom his authority has been delegated in writing.Warranty requires purchaser compliance with Firestone roofingcare and maintenance requirements stated on reverse side ofwarranty document, including at least twice yearly inspections;ponding water not be allowed; drain areas remain clear; noexposure to acids, solvents, greases, oil, fats, chemicals, and thelike; protective walkways for roof traffic; maintenance of counterflashings, metal work, drains, skylights, equipment curbs andsupports, other rooftop accessories, and roof coatings andsealants.In the event the roof access is limited due to security or otherrestrictions, purchaser shall reimburse Firestone for all reasonablecosts incurred during inspection and/or repair of the system whichare due to delays associated with said restrictions. Purchaser shallbe responsible for the removal and replacement of anyoverburdens, superstrata or overlays, either permanent ortemporary, as necessary to expose the surface of the membrane forinspection and/or repair.Warranty is transferable subject to Firestone inspection, written approval, and payment ofcurrent transfer fee.If Firestone's investigation reveals that the cause of a leak is outside the scope ofthe warranty, investigation costs shall be paid by owner; failure of owner to paythese costs shall render the warranty null and void. Any dispute, controversy, orclaim between the owner and Firestone concerning warranty shall be settled byfinal and binding arbitration in accordance with the American Arbitration<strong>Association</strong>'s rules for the construction industry. Warranty shall be governed andconstrued in accordance with the laws of the state of Indiana without regard toconflict of laws.Firestone does not undertake any analysis of the architecture or engineeringrequired to evaluate what type of roof system is appropriate. Warranty cannot beamended, altered, or modified in any way except in writing signed by the presidentof Firestone or a person to whom his authority has been delegated in writing.Warranty requires owner compliance with Fire stone roofing care andmaintenance requirements stated on reverse side of warranty document, includingat least twice yearly inspections; ponding water not be allowed; drain areas remainclear; no exposure to acids, solvents, greases, oil, fats, chemicals and the like;protective walkways for roof traffic; maintenance of counter flashings, metal work,drains, skylights, equipment curbs and supports, other rooftop accessories, androof coatings and sealants.In the event the roof access is limited due to security or other restrictions, theowner shall reimburse Firestone for all reasonable costs incurred during inspectionand/or repair of the system which are due to delays associated with saidrestrictions. The owner shall be responsible for the removal and replacement ofany overburdens, superstrata or overlays, either permanent or temporary, asnecessary to expose the system for inspection and/or repair.Warranty is transferable subject to Firestone inspection, written approval,and payment of current transfer fee.If Firestone's investigation reveals that the cause of a leak is excludedunder the warranty, investigation costs shall be paid by owner; failure ofowner to pay these costs shall render the warranty null and void. Anydispute, controversy or claim between the owner and Firestoneconcerning warranty shall be settled by final and binding arbitration inaccordance with the American Arbitration <strong>Association</strong>'s rules for theconstruction industry. Warranty shall be governed and construed inaccordance with the laws of the state of Indiana without regard to conflictof laws.Firestone does not undertake any analysis of the architecture orengineering required to evaluate what type of roof system is appropriate.Warranty cannot be amended, altered, or modified in any way except inwriting signed by the president of Firestone or a person to whom hisauthority has been delegated in writing.Warranty requires owners compliance with Firestone roofing careand maintenance requirements stated on reverse side of warrantydocument, including at least twice yearly inspections; ponding water notbe allowed; drain areas remain clear; no exposure to acids, solvents,greases, oil, fats, chemicals, and the like; protective walkways for rooftraffic; maintenance of counter flashings, metal work, drains, skylights,equipment curbs and supports, other rooftop accessories, and roofcoatings and sealants.In the event the roof access is limited due to security or otherrestrictions, the owner shall reimburse Firestone for all reasonable costsincurred during inspection and/or repair of the system which are due todelays associated with said restrictions. The owner shall be responsiblefor the removal and replacement of any overburdens, superstrata oroverlays, either permanent or temporary, as necessary to expose thesystem for inspection and/or repair.27. Executed by owner No No No603

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entityFirestone Building Products Company,division of Bridgestone/Firestone, Inc.Firestone Building Products Company,division of Bridgestone/Firestone, Inc.Flex Membrane International2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered"Manufacturer's Insulation Warranty"; 4/96 - Item #953S-01 Firestone <strong>Roofing</strong> Membrane Limited Warranty; December 1996;12/96Item #812R (Replaces 8/94)-01ΑWarranty≅; July 1990Firestone ISO 95+ insulation Firestone Rubbergard EPDM, Firestone Ultra Ply 78+ Flex FB Elvaloy, Flex MF/R Elvaloy, Flex MF/R 50, FlexMF/R 60, Flex MF/R 70, Flex MF/R 80, Flex FB 1004. Scope of coverage Material only; Firestone warrants that when used under aFirestone-manufactured roofing membrane, the FirestoneISO 95+ will not warp, bow, or destablize to the point ofcausing a roof leak as a result of any manufacturing defectin the ISO 95+. This warranty is only effective when issuedwith a Firestone Standard or Red Shield System warranty.Material only; Firestone warrants that it will provide replacementmembrane materials sufficient to replace any area of Firestone roofingmembrane that leaks as a result of ordinary exposure to the elements orany manufacturing defect in the membrane. Warranty does not coverflashings, seams, adhesives, sealants, coatings, or workmanship.Material and workmanship; Flex warrants againstleakage caused by defects in Flex materials orworkmanship in the application of Flex's material.5. Length of coverage 10, 15, or 20 years [firestone indicates term of insulationwarranty cannot exceed that of the standard or Red SheildTerm.]15 years: Firestone Ultra Ply 78+; 20 years: Firestone EPDM 5, 10, or 15 years6. Nature of remedy Firestone shall provide the owner with free Firestone 95+and Firestone roofing membrane materials and shall repairthe affected roof area.The owner's sole and exclusive remedy and Firestone's liability shall belimited to the repair of the leak.8. Notification requirements None stated. Firestone's repair obligations over the life of the warranty are limited tothe original cost of the membrane installation.8. Notification requirements Written notification within 30 days of the discovery of anyevent leading to a claim.9. Exclusive or additional remedyThe warranty is the owner's sole and exclusive remedyagainst Firestone; the warranty supersedes and is in lieu ofall other warranties or guarantees; Firestone shall not beliable for any damages that are based on negligence,breach of warranty, strict liability, or any other theory, otherthan the limited liability set forth in the warranty; excludesUCC warranties.Written notification within 30 days of any occurrence of a leak.The warranty is owner's sole and exclusive remedy against Firestone;warranty supersedes and is in lieu of all other warranties or guarantees;excludes UCC warranties.Flex's sole obligation shall be to repair any leaks in theroof caused by defects in Flex materials or workmanshipof the roofing contractor in the application of Flex'smaterial.None stated.Written notification to Flex Membrane International,Bethlehem Drive, Morgantown, PA 19543, by registeredmail within 30 days of discovery of any defect in FlexmaterialWarranty supersedes and is in lieu of any and all otherexpress warranties that conflict with the terms andconditions stated in the warranty.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)No No NoFirestone's determination Firestone's determination Flex's judgement1, 2, 3, 6, 7, 10, 12, 13, 18, 22. The warranty alsospecifically excludes damages caused by atomic radiation,insects, or animals.1, 2, 3, 6, 7, 8, 10, 12, 17, 18, 22. The warranty also specificallyexcludes damages caused by atomic radiation, insects, or animals, andSpecific Condition H.1, 2, 3, 4, 5, 1613. Wind coverage/exclusionsThe warranty excludes winds, hurricanes, and tornadoes.Firestone indicates that there is no coverage for damagescaused by wind.The warranty excludes winds, hurricanes, and tornadoes. Firestoneindicates that there is no coverage for damage caused by wind.Warranty excludes hurricanes and tornadoes. Flexindicates that warranty covers wind speeds up to 60 mph.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)J M, S (See Special Features/Conditions.) B, C, F, G, H15. Cost to obtain None $200 5 years: None; 10 years: $5.00/square;15 years:$8.00/square16. Minimum chargeNone $200 5 years: None; 10 years: $375;15 years: $60017. Ineligible structure or building useSingle-family residence, patio, plaza deck, roofs outside of Single-family residence, patio, plaza deck, roofs outside of U.S. andU.S. and Canada.Canada.None604

18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsPreinstallation notice must be submitted 14 days prior to jobstart and must be approved by Firestone technical service.Preinstallation notice must be submitted 14 days prior to job start.Yes No Yes20. Job inspection policy Firestone field technical representative makes on-siteinspection after job completion prior to issuance ofwarranty; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionAlthough this is a material-only warranty, the contractor isobli-gated to make repairs to workmanship deficiencies fortwo years.No on-site inspectionsAlthough this is a material-only warranty, the contractor is obli-gated tomake repairs to workmanship deficiencies for two years.The contractor submits request for guarantee to Flex forapproval with roof diagram.Flex technical representative makes on-site inspectionsprior to, during application (a minimum of oneinspection), and after completion of installation prior toissuance of warranty; no charge.The contractor is obligated to make repairs to all leaksand workmanship deficiencies for two years.No; Firestone indicates that it is self-insured. No; Firestone indicates that it is self-insured. No; Flex indicates that it does not carry insurancecovering its warranty obligations.Firestone manufactures and sells the product. Firestone manufactures and sells the product. Flex manufactures and sells the product.No renewal provision No renewal provision No renewal provision in warranty. Flex indicates that itmay issue extensions on an individual project basis.25. Assignability No restrictions stated. Warranty is transferable subject to Firestone inspection, writtenapproval, and payment of current transfer fee.Warranty may not be transferred without the writtenconsent of Flex. Flex indicates it permits transfer withwritten consent from Flex and payment of transfer fee.26. Special features/conditionsFirestone does not undertake any analysis of thearchitecture or engineering required to evaluate what typeof roof system is appropriate.Warranty requires compliance with Firestone roofingcare and maintenance requirements stated on reverse sideof warranty, including at least twice yearly inspections;ponding water not allowed; drain areas remain clear; noexposure to acids, solvents, greases, oils, fats, chemicalsand the like. Contact Firestone immediately if the Firestone<strong>Roofing</strong> System comes into contact with any such materialsIf Firestone's investigation reveals that the cause of a leak is outside the scope ofthe warranty, investigation costs shall be paid by purchaser; failure of purchaser topay these costs shall render the warranty null and void. Any dispute, controversy,or claim between the purchaser and Firestone concerning warranty shall be settledby final and binding arbitration in accordance with the American Arbitration<strong>Association</strong>'s rules for the construction industry. Warranty shall be governed andconstrued in accordance with the laws of the state of Indiana without regard toconflict of laws.Firestone does not undertake any analysis of the architecture or engineeringrequired to evaluate what type of roof system is appropriate. Warranty cannot beamended, altered, or modified in any way except in writing signed by the presidentof Firestone or a person to whom his authority has been delegated in writing.Warranty requires purchaser compliance with Firestone roofing care andmaintenance requirements stated on reverse side of warranty document, includingat least twice yearly inspections; ponding water not be allowed; drain areas remainclear; no exposure to acids, solvents, greases, oil, fats, chemicals, and the like;protective walkways for roof traffic; maintenance of counter flashings, metal work,drains, skylights, equipment curbs and supports, other rooftop accessories, androof coatings and sealants.In the event the roof access is limited due to security or other restrictions,purchaser shall reimburse Firestone for all reasonable costs incurred duringinspection and/or repair of the system which are due to delays associated withsaid restrictions. Purchaser shall be responsible for the removal and replacementof any overburdens, superstrata or overlays, either permanent or temporary, asnecessary to expose the surface of the membrane for inspection and/or repair.27. Executed by owner No No NoNo representative of Flex has authority to make anyrepresentations or promises except as stated in warranty.605

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Flex Membrane International GAF Materials Corporation (GAF) GAF Materials Corporation (GAF)2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑMembrane Material Warranty≅; July 1990Flex membrane material in all Flex roof systems4. Scope of coverage Material only; Flex warrants that the Flex membrane materialwill be free from defects.5. Length of coverage 5, 10, or 15 years 10 years6. Nature of remedy Flex's sole obligation shall be to repair or replace the defectivemembrane material.7. Monetary limitations Flex's liability shall not exceed the original value of themembrane material.8. Notification requirements Written notification to Flex Membrane International, BethlehemDrive, Morgantown, PA 19543, by registered mail within 30days of discovery of any defect in Flex material.ΑLimited Warranty on Material GAFGLAS≅; March 1994, Form10450 3/94GAFGLAS Ply 6, GAFGLAS Ply 4 and all GAF BURspecificationsMaterial only; GAF warrants that the GAFGLAS roof membraneand GAF base flashing materials will withstand ordinary wearand tear of the elements and will be free of manufacturingdefects that affect their ability to maintain the roof in awatertight condition. Warranty applies only to GAFGLASroofing membrane and GAF base flashings installed inaccordance with current specifications.GAF's sole responsibility is the repair or replacement, at GAF'soption, of that portion of GAF materials that containsmanufacturing defects or deterioration caused by ordinary wearand tear by the elements that have resulted in a roof leak.Repair or replacement of the roof deck or of other materials notsold by GAF is not included.GAF's maximum liability during first year after completion is theoriginal cost of GAF materials. After the first year, GAF'smaximum liability is the original cost of the GAF materialsreduced by 10 percent of the maximum liability during eachyear after the first year, less any costs previously incurred byGAF for repair or replacement. In no event shall GAF be liablefor a sum greater than the maximum GAF liability stated hereinor more than five times the proportional cost paid to GAF forthe GAF materials installed on the affected portion of the roof,whichever is less.Written notification within 30 days to GAF Contractor Servicesdepartment, 1361 Alps road, Bldg. 7-1, Wayne, NJ 07470 ofleaks resulting from manufacturing defect or ordinary war andtear by the elements."EverGuard Gold Seal Guarantee;" January 1998; Form 105101/98EverGuard Single-Ply Membrane SystemsMaterial and workmanship; GAF guarantees to make repairs toGAF EverGuard roofing membrane, coated metal roof edgesand base flashing, membrane base flashing, expansion jointcovers, and pre-flashed accessories as are necessary tocorrect leaks resulting solely from natural deterioration of theEverGuard roofing materials and from workmanship in applyingthe EverGuard roofing materials.10 years: All materials and systems15 years: Minimum .045" material, all systems20 years: Minimum .080" material, new/tear-off systemsGAF will make repairs to GAF EverGuard roofing membrane,coated metal roof edges and base flashing, membrane baseflashing, expansion joint covers, and pre-flashed accessoriesas shall be necessary to correct covered leaks at no cost toowner. Warranty excludes repair or replacement of insulation orother materials not sold by GAF.None statedWritten notification within 30 days of discovery of leak to GAFContractor Services Department, 1361 Alps Road, Building 7,Wayne, NJ 07470. Notice to roofing contractor is not notice toGAF.9. Exclusive or additional remedy Warranty supersedes and is in lieu of any and all otherexpressed warranties that are in conflict with the terms andconditions stated in warranty.Warranty is expressly in lieu of any other guarantee and/orwarranties and any other obligations or liability on the part ofGAF, whether any claim is based upon strict liability,negligence, breach of warranty, or any other theory or cause ofaction; excludes UCC warrantiesGuarantee is expressly in lieu of any other guarantees and/orwarranties and any other obligations or liability on the part ofGAF, whether any claim is based upon strict liability,negligence, breach of warranty, or any other theory or cause ofaction; excludes UCC warranties. No representative,employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability orresponsibility.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoFlex's judgment Neutral (no provision). Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 16 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including aliphatic or aromaticsolvents, chlorinated hydrocarbons, turpentine, oils, organic or inorganicpolar materials), 15, 17, 18, 19, 20, 22; also excludes any damageoccurring more than 30 days after discovery of a leak, unless GAF isnotified within 30 days of discovery.1, 2, 3, 4, 5, 6, 7 (not applicable to GAF insulation or GAF roofbase), 8, 9, 10, 11, 12, 13, 15, 17, 22

13. Wind coverage/exclusions Warranty excludes hurricanes and tornadoes. Flex indicatesthat warranty covers wind speeds up to 60 mph.Warranty excludes windstorms, hurricanes, and tornadoes.GAF indicates that there is no coverage for damage caused bywind.GAF indicates warranty covers roof damage resulting from windspeeds up to 60 mph. Warranty excludes roof damageresulting from windstorms above 60 mph, hurricanes andtornadoes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F, G, H C, H, I. Also, warranty provides that cancellation of this warranty willresult if the roof is damaged by any cause listed above as a specificexclusion that will affect the integrity or watertightness of the roof.C, H, I, S. Also, guarantee states that cancellation of this guarantee willresult if roof is damaged by any cause listed as an exclusion (See Item12 above) if the damage affects the integrity or watertightness of the roofand owner does not promptly make repairs following notification by GAF.15. Cost to obtain 5 years: None; 10 years: $1.00/square; 15 years: $2.00/square None 10 years: $6.00/sq 15 years: $9.00 sq. 20 years: $12.00/square16. Minimum charge 5 years: None; 10 years: $50; 15 years: $100 None 10 years: $500 15 years: $750 20 years; $1,00017. Ineligible structure or building use None Domed structures, heated tanks, storage silos, drying kilns, car washbuildings, swimming pools, and other structures with abnormally highhumidityconditions, cold-storage and cooler buildings when the freezeror cooler insulation is used as the base to receive the roof18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsThe contractor submits request for guarantee to Flex forapproval with roof diagram.NoneYes No YesPrivate residences, walking decks, buildings with high internal humidity,freezer buildings or buildings used for cold storage unless approved inwriting in advance by GAF.Pre-installation form is submitted by contractor, reviewed byContractor Services department, project acceptance is faxedand/or mailed back to contractor.20. Job inspection policy Flex technical representative makes on-site inspection prior to,during application (a minimum of one inspection), and aftercompletion of installation prior to issuance of warranty; nocharge.21. Contractor’s post-installationobligation22. Backed by named insurance orsuretyAlthough this is a material-only warranty, contractor is obligatedto make repairs to workmanship deficiencies for two years.NoNo on-site inspectionsNone; material-only warrantyNo; GAF indicates that it does not carry insurance covering itswarranty obligations.GAF technical field representative makes on-site inspectionsprior to and during (as required by project size and projectspecifications) and after application, as well as two years afterissuance of warranty; no charge.Contractor obligated to make repairs to all leaks andworkmanship deficiencies for two years.No; GAF indicates it does not carry insurance covering itsguarantee obligations.23. Issuing entity manufactures and/orsells productsFlex manufactures and sells the product. GAF manufactures and sells the product. GAF sells products only.24. Conditions for renewal orextensionNo renewal provision in warranty. Flex indicates that it mayissue extension on individual project basis.25. Assignability Warranty may not be transferred without Flex's written consent.Flex indicates that it permits transfer with written consent fromFlex and payment of transfer fee.26. Special features/conditions No representative of Flex has authority to make anyrepresentations or promises except as stated in warranty.No renewal provisionNot transferable or assignable in any mannerOwner must sign and mail in GAF warranty registration formwithin 30 days of roof completion in order for warranty to beeffective. No representative, employee, or agent of GAF, orany other person has any authority to assume for GAF anyadditional or other liability or responsibility. GAF shall not beresponsible for or liable for any change or amendment to theGAF roof specifications in regard to the construction of the roof,unless the change or amendment to the specifications areapproved in writing by an authorized GAF technical servicemanager.27. Executed by owner No NoNo renewal provisionAssignable to another owner only if (1) request is made in writing 30 days afterownership transfer; (2) membrane is inspected and any required repairs arecompleted at owner=s expense; (3) proposed assignment is approved in writingby an authorized GAF technical services manager; and (4) an assignment fee of$500 is paid to GAF. Otherwise guarantee is not assignable, directly or indirectly.Owner shall, at its expense, (a) perform regular inspections and maintenance;(b) keep records of all inspections and maintenance performed; and (c) performrepairs to the roof or other building components identified during inspections byGAF as being necessary to preserve the integrity of the GAF roofing materials.Failure of owner to perform work promptly following written notification by GAFmay result in cancellation of guarantee if the owner=s failure results in damageto the GAF roofing materials.Owner shall, at its expense, remove (and, if desired, subsequently replace)any materials and equipment that impede inspection and repair of the GAFroofing materials, such as HVAC units and satellite dishes mounted so that thereis no functional access to the roof system, and precast concrete or rubberpavers, wood decking or steel grating that are installed over the GAF roofingmaterials.GAF shall not be responsible for or liable for any change or amendment tothe GAF roof specifications in regard to the roof construction, unless the changeor amendment is approved in writing by an authorized GAF Contractor Servicesmanager.In an emergency, the Owner may authorize or perform temporary repairs tominimize damage to the building or its contents. Such work will not result in thecancellation of guarantee provided that the temporary repairs are reasonableand customary, and do not result in permanent damage to the GAF membraneor base flashing. Owner is responsible for all expenses associated withtemporary repairs.607

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity GAF Materials Corporation (GAF) GAF Materials Corporation (GAF) GAF Materials Corporation (GAF)2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered"Liberty Guarantee"; November 1996; Form 10446 11/96 "Commercial Roof Guarantee"; November 1996, Form 1044211/96Built-Up <strong>Roofing</strong> and Modified Bitumen Products: RuberoidTorch FR, Ruberoid Torch Plus, Ruberoid Torch, RuberoidMop, Ruberoid Mop FR, Ruberoid Mop 170 FR, Ruberoid MopPlus, Ruberoid 30 FR, Ruberoid 30, Ruberoid 20, RuberoidMop Smooth, Ruberoid Torch 1, Ruberoid 601 Plus, RuberoidModified Base Sheet, GAFGLAS Ply 6, GAFGLAS Ply 4,GAFGLAS Flex Ply 6, Ultima 80 BaseAll Ruberoid and GAFGLAS Specifications"Ruberoid LMG"; January 1, 1997; Form 10460 1/97Modified Bitumen Products: Ruberoid Mop Plus, Ruberoid MopFR, Ruberoid Mop 170 FR, Ruberoid Mop Granule, Ruberoid30, Ruberoid 30 FR, Ruberoid Torch FR, Ruberoid Torch Plus,Ruberoid Torch Granule, Ruberoid Torch Smooth Coated,Ruberoid Torch Smooth4. Scope of coverage Material and workmanship; GAF guarantees to make repairs toGAF roofing membrane, GAF base flashing, GAF insulation, GAFexpansion joint covers, and GAF pre-flashed accessories as arenecessary solely to correct leaks resulting from natural deteriorationof GAF materials; blisters; bare spots; fishmouths; ridges; splits notcaused by structural failure or movement of or cracks in substrateroof base or non-GAF insulation over which GAF materials areapplied; buckles and wrinkles; workmanship in applying the GAFmaterials; and slippage of membrane or base flashing.5. Length of coverage 5, 10 and 12 years: 3- or 4-ply GAFGLAS Ply 4 or Ply 6Specifications, Ruberoid, or Plus specifications; 12 years:Ruberoid or Plus specifications; 15 or 20 years: 4-Ply GAFGLASPly 6 Specifications, Ruberoid Plus specifications. Approvedcoating or asphalt and gravel must be applied as top covering forsmooth surface Ruberoid membrane to obtain 12-year RuberoidLiberty Guarantee.6. Nature of remedy GAF will make repairs to GAF membrane, base flashing, insulation,expansion joint covers, and pre-flashed accessories as shall benecessary solely in order to correct covered leaks at no cost toowner. Warranty excludes repair or replacement of materials notsold by GAF.Material and workmanship; GAF guarantees to make repairs toGAF roofing membrane, GAF base flashing, GAF insulation, GAFexpansion joint covers and GAF pre-flashed accessories as arenecessary solely to correct leaks resulting from natural deteriorationof GAF materials; blisters; bare spots; fishmouths; ridges; splits notcaused by structural failure or movement of or cracks in substrateroof base or non-GAF insulation over which GAF materials areapplied; buckles and wrinkles; workmanship in applying the GAFmaterials; and slippage of membrane or base flashing.5 and 10 years: 3- or 4-ply GAFGLAS Ply 4 or Ply 6 specifications,Ruberoid, or Plus specifications; 10 years: Ruberoid or Plusspecifications; 12 years: Ruberoid or Plus specifications; 15 years:4-ply GAFGLAS Ply 6 specifications, Ruberoid Plus specifications;20 years: 4-ply GAFGLAS Ply 6 specifications, Ruberoid Plusspecifications. Approved coating or asphalt and gravel must beapplied as top covering for smooth surface Ruberoid membrane toobtain 10, 15, or 20-year guarantee.GAF will make repairs to GAF membrane, base flashing, insulation,expansion joint covers, and pre-flashed accessories as shall benecessary solely in order to correct covered leaks at no cost to theowner. Warranty excludes repair or replacement of materials notsold by GAF.Material only; GAF warrants that the Ruberoid roof membraneand Ruberoid base flashing materials will withstand ordinarywear and tear by the elements and will be free of manufacturingdefects which affect their ability to maintain the roof inwatertight condition. Warranty applies to Ruberoid materialsinstalled in accordance with current GAF specifications.10 years: Ruberoid 30, Ruberoid 30 FR, Ruberoid TorchSmooth; 12 years: Ruberoid Mop 170 FR, Ruberoid MopGranule, Ruberoid Torch Smooth Coated, Ruberoid TorchGranule; 15 years:Ruberoid Mop Plus, Ruberoid Mop Plus FR,Ruberoid Torch Plus, Ruberoid Torch FRGAF's sole responsibility is the repair or replacement, at GAF'soption, of that portion of the Ruberoid materials that containsmanufacturing defects or deterioration caused by ordinary wear andtear by the elements that have resulted in a roof leak. Repair orreplacement of the roof deck or other roof components used withthe Ruberoid materials is not included.7. Monetary limitations None stated. GAF's maximum liability shall not exceed in the aggregate overthe life of the guarantee more than $100 per square.None stated.8. Notification requirements Written notification within 30 days of discovery of leak to GAFContractor Services department, 1361 Alps Road, Building 7-B,Wayne, NJ 07470Written notice within 30 days of discovery of leak to GAFContractor Services department, 1361 Alps Road, Building 7-B,Wayne, NJ 07470Written notice within 30 days of discovery of leak to GAFContractor Services Department, 1361 Alps Road, Building 2-1,Wayne, NJ 074709. Exclusive or additional remedy The guarantee is expressly in lieu of any other guaranteesand/or warranties and any other obligations or liability on thepart of GAF, whether any claim is based upon strict liability,negligence, breach of warranty, or any other theory or cause ofaction; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)The guarantee is expressly in lieu of any other guaranteesand/or warranties and any other obligations or liability on thepart of GAF whether any claim is based upon strict liability,negligence, breach of warranty, or any other theory or cause ofaction; excludes UCC warranties.No No NoNeutral (no provision) Neutral (no provision) GAF's determination1, 2, 3, 4, 5, 6, 7 (not applicable to GAF insulation or GAF roofbase), 8, 9, 10, 11, 12, 13, 15, 17, 22, 24.13. Wind coverage/exclusions Warranty excludes windstorms, hurricanes, and tornadoes.GAF indicates that there is no coverage for damage caused bywind.1, 2, 3, 4, 5, 6, 7 (not applicable to GAF insulation or GAF roofbase), 8, 9, 10, 11, 12, 13, 15, 17, 22, 24.Warranty excludes windstorms, hurricanes and tornadoes.GAF indicates that there is no coverage for damage caused bywind.Warranty is expressly in lieu of any other guarantees and/orwarranties and any other obligations or liability on the part ofGAF whether any claim is based upon strict liability,negligence, breach of warranty, or any other theory or cause ofaction; excludes UCC warranties.1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 17, 19, 20, 22, 24.Warranty excludes windstorms, hurricanes and tornadoes.GAF indicates that there is no coverage for damage caused bywind.

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)15. Cost to obtainC, H, I, S. Also, guarantee states that cancellation of this guaranteewill result if roof is damaged by any cause listed as an exclusion(See Item 12 above) if the damage affects the integrity orwatertightness of the roof and owner does not promptly makerepairs following notification by GAF.5 yrs: $ 5.00/sq; 10 yrs: $ 9.00/sqe; 12 yrs: $10.00/sq;15 yrs: $12.00/sq; 20 yrs: $17.00/sq16. Minimum charge 5 yrs: $350; 10 yrs: $750; 12 yrs: $750;15 yrs: $800; 20 yrs: $1,00017. Ineligible structure or building use High-humidity buildings (i.e., car washes, swimming pools),domed structures, heated tanks, storage silos, drying kilns,freezer or cooler buildings when the freezer or cooler insulationis also the roof insulation.C, H, I, S. Also, the guarantee states that cancellation of thisguarantee will result if the roof is damaged by any cause listed asan exclusion (See Item 12 above) if the damage affects theintegrity or watertightness of the roof and owner does not promptlymake repairs following notification by GAF.5 yrs: $ 4.00/sq; 10 yrs: $ 6.00/sq; 12 yrs: $7.00/sq;15 yrs: $9.00/sq; 20 yrs: $12.00/sq5 yrs: $350; 10 yrs: $500; 12 yrs: $500;15 yrs: $500; 20 ys: $500Domed structures, heated tanks, storage silos, drying kilns, carwash buildings, swimming pools and other structures withabnormally high humidity conditions, cold-storage and coolerbuildings when the freezer or cooler insulation is used as thebase to receive the roof.Warranty states that cancellation of this warranty will result ifthe roof is damaged by any cause listed as an exclusion (SeeItem 12 above) if the damage affects the integrity orwatertightness of the roof.NoneNoneApplications over buildings with high internal humidity, freezerbuildings or buildings used for cold storage.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirements20. Job inspection policy21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionThe contractor must submit a notice of award of contract atleast ten days prior to commencement, providing job details.Contractor must submit a notice of award of contract prior tocommencement, providing job details.Yes Yes YesGAF territory manager makes on-site inspections prior to andduring application. GAF field technical representative makes onsiteinspections after completion prior to issuance of warranty, aswell as two years after issuance of warranty; no charge.The contractor is obligated to make repairs to all leaks andworkmanship deficiencies for two years.No; GAF indicates that it does not carry insurance covering itsguarantee obligations.GAF territory manager makes on-site inspections prior to andduring application. GAF field technical representative makes onsiteinspections after completion, prior to issuance of guarantee, aswell as two years after issuance of guarantee; no charge.Contractor obligated to make repairs to all leaks andworkmanship deficiencies for two yearsNo; GAF indicates it does not carry insurance covering itsguarantee obligations.None required.No on-site inspections.None; material-only guarantee.No; GAF indicates it does not carry insurance covering itsguarantee obligations.GAF manufactures and sells product. GAF manufactures and sells product. GAF manufactures and sells product.Ruberoid Liberty guarantees may be renewed for five years at acost of $5.00 per square. Inspection is required and repairs are atowner’s expense. Application of Matrix modified bitumen coating isrequired. Contact GAF for program details.25. Assignability Assignable to another owner only if (1) request is made in writing 30 days afterownership transfer; (2) membrane is inspected and any required repairs arecompleted at owner's expense; (3) proposed assignment is approved in writingby an authorized GAF Contractor Services manager; and (4) an assignment feeof $500 is paid to GAF. Otherwise, guarantee is not assignable, directly orindirectly.The owner requests during the last 6 months of the 5 th year that GAF make roofinspection free of charge. GAF will advise the owner of any repairs necessary toqualify for additoinal 5 yrs. The owner must make repairs at his sole expense &notify jGAF no later than 45 days after the expiration of the original 5-yr.guarantee. GAF will then reinspect and, if acceptable, guarantee will beextended for 5 yrs. GAF reserves the right to refuse to renew the guarantee ifGAF determines repairs are needed due to specific exclusions from guaranteecoverage.Assignable to another owner only if (1) request is made in writing within 30 daysafter ownership transfer, (2) membrane is inspected and any required repairs arecompleted at owner's expense, (3) proposed assignment is approved in writingby an authorized GAF Contractor Services manager, and (4) an assignment feeof $500 is paid. Otherwise, guarantee is not assignable, directly or indirectly.No renewal provisionNot transferable or assignable in any manner.26. Special features/conditions Owner shall, at its expense, (a) perform regular inspections and maintenance;(b) keep records of all inspections and maintenance performed; and (c) performrepairs to the roof or other building components identified during inspections byGAF as being necessary to preserve the integrity of the GAF roofing materials.Failure of owner to perform work promptly following written notification by GAFmay result in cancellation of guarantee if the owner's failure results in damage tothe GAF roofing materials.Owner shall, at its expense, remove (and, if desired, subsequently replace)any materials and equipment that impede inspection and repair of the GAFroofing materials, such as HVAC units and satellite dishes mounted so that thereis no functional access to the roof system, and precast concrete or rubberpavers, wood decking or steel grating that are installed over the GAF roofingmaterials.No representative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability or responsibility.GAF shall not be responsible for or liable for any change or amendment to theGAF roof specifications, unless the change or amendment to the specificationsis approved in writing by an authorized GAF technical service manager.In an emergency, the Owner may authorize or perform temporary repairs tominimize damage to the building or its contents. Such work will not result in thecancellation of guarantee provided that the temporary repairs are reasonableand customary, and do not result in permanent damage to the GAF membraneor base flashing. Owner is responsible for all expenses associated withtemporary repairs.27. Executed by owner No NoOwner shall, at its expense, (a) perform regular inspections and maintenance;(b) keep records of all inspections and maintenance performed; and (c) performrepairs to the roof or other building components identified during inspections byGAF as being necessary to preserve the integrity of the GAF roofing materials.Failure of owner to perform work promptly following written notification by GAFmay result in cancellation of guarantee if the owner's failure results in damage tothe GAF roofing materials.Owner shall, at its expense, remove (and, if desired, subsequently replace)any materials and equipment that impede inspection and repair of the GAFroofing materials, such as HVAC units and satellite dishes mounted so that thereis no functional access to the roof system, and precast concrete or rubberpavers, wood decking and steel grating that are installed over the GAF roofingmaterials.No representative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability or responsibility.GAF shall not be responsible for or liable for any change or amendment to theGAF roof specifications, unless the change or amendment is approved in writingby an authorized GAF Contractor Services manager. The roofing contractor isnot an agent of GAF; notice to the roofing contractor is not notice to GAF.In an emergency, the owner may authorize or perform temporary repairs tominimize damage to the building or its contents. Such work will not result in thecancellation of guarantee provided the temporary repairs are reasonable andcustomary and do not result in permanent damage to the GAF membrane orbase flashing. Owner is responsible for all expenses associated with temporaryrepairs.Claims under this warranty require proof of purchase.GAF shall have reasonable time after notification of a claim to inspect theroof and if GAF determines manufacturing defects are covered by warranty, GAFwill have 30 days after receipt of notification of leaks to make or cause to bemade repairs or replacement.The owner must initiate and follow a 10-point maintenance programprescribed by GAF on the reverse side of guarantee including: (1) maintaining afile showing all inspections, repairs, original construction drawings andspecifications; (2) inspecting roof at least semiannually; (3) inspecting roof fordamage after severe weather conditions; (4) repairing non-guaranteedconditions affecting the GAF roof system; (5) removing any debris; (6)examining/reattaching loose metalwork; (7) repairing loose masonry/copingstones; (8) examining roof top equipment to determine if they move excessivelyor leak; (9) recoating any cracked, flaking, blistered or worn areas of protectivecoatings; and (10) minimize rooftop traffic.No representative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability or responsibility.GAF shall not be responsible for or liable for any change or amendment to theGAF specifications, unless the change or amendment to the specifications isapproved in writing by an authorized GAF Contractor Services manager. Noticeto the roofing contractor or distributor is not notice to GAF.Yes; Owner must sign and mail in warranty registration form within 90 days ofroof completion.609

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity GAF Materials Corporation (GAF) GAF Materials Corporation (GAF) GAF Materials Corporation (GAF)2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑLimited Warranty on Material Ruberoid Ten≅; March 1994;Form 10301 3/94All Ruberoid specifications"Liberty PDR Guarantee"; November 1996; Form 10457 11/96 "Liberty LWIC Single Source Guarantee"; December 1996;Form 10459 12/96Modified Bitumen Specifications: NN-O-2-MS(PD), I-O-2-MS(PD), NN-O-2-TS(PD), I-O-2-TS(PD), NN-O-3-MS(PD), I-O-3-MS(PD), NN-O-3-TS(PD), I-O-3-TS(PD)GAFGLAS Built-Up Roof Specifications: N-B-5-G, N-B-5-C, N-B-5-M, N-B-4-G, N-B-4-C,N-B-4-M, N-B-5-G/P6, N-B-5-C/P6, N-B-5-M/P6, N-B-4-G/P6, N-B-4-C/P6, N-B-4-M/P6;Ruberoid Modified Bitumen Specifications: N-1-2-20/30, N-1-2-20/30FR, N-1-1-TS, N-1-1-TG, N-1-1-TSC, N-1-1-MG, N-1-1-MGFR, N-1-1-MSG, N-2-1-MGP, N-2-1-MGPFR, N-3-1-MGP, N-3-1-MGPFR, N-1-2-20/MG, N-1-2-20/MGRF, N-1-2-20/MSG, N-1-2-20/MGP, N-1-2-20/MGPFR, N-2-1-TGP, N-2-1-TGPFR, N-3-1-TGP, N-3-1-TGPFR, N-1-2-TGP, N-1-2-TGPFR, N-1-2-TG4. Scope of coverage Material only; GAF warrants that the Ruberoid roofingmembrane and Ruberoid base flashing materials will withstandordinary wear and tear by the elements and will be free ofmanufacturing defects that affect their ability to maintain theroof in a watertight condition. Warranty applies only to Ruberoidroofing membrane and Ruberoid base flashings installed inaccordance with current Ruberoid specifications.5. Length of coverage 10 years; 12 years with GAF weather-coated emulsion or fiberedaluminum coating, or granule surface.6. Nature of remedy GAF's sole responsibility is the repair or replacement, at GAF'soption, of that portion of Ruberoid materials that containsmanufacturing defects or deterioration caused by ordinarywear and tear by the elements that have resulted in a roof leak.7. Monetary limitationsGAF's maximum liability during the first year after completion is theoriginal cost of Ruberoid materials. After the first year, GAF's maximumliability is the original cost of the Ruberoid materials reduced by tenpercent of the maximum liability during each year after the first year, lessany costs previously incurred by GAF for repair or replacement. In noevent shall GAF be liable for a sum greater than maximum liability ofwarranty or more than five times the proportional cost paid to GAF forthe Ruberoid materials installed on the affected portion of the roof,whichever is less.8. Notification requirements Written notification within 30 days to nearest GAF Contractor services,1361 Alps Road, Wayne, NJ Bldg 7-1of leak resulting frommanufacturing defect or ordinary wear and tear by the elements.9. Exclusive or additional remedy Warranty is expressly in lieu of any other guarantee and/or warrantiesand any other obligations or liabi-lity on the part of GAF, whether anyclaim is based upon strict liability, negligence, breach of warranty, or anyother theory or cause of action; excludes UCC warranties.Material and workmanship; GAF guarantees GAF roofing membrane, GAF base flashing,GAF underlying insulation, GAF expansion joint covers and GAF pre-flashed accessoriesinstalled with an above-grade plaza deck assembly will withstand ordinary wear and tearby the elements and will be free of manufacturing and installation workmanship defectswhich affect its ability to maintain a watertight condition. Warranty covers repairs to theGAF materials as shall be necessary solely to correct leaks resulting from naturaldeterioration of GAF materials; blisters; fishmouths; ridges; splits not caused by structuralfailure or movement of or cracks in substrate roof base or non-GAF insulation over whichGAF materials are applied; buckles and wrinkles; workmanship in applying the GAFmaterials; slippage of membrane or base flashing; and normal pedestrian plaza deckusage.Guarantee covers repairs to GAF roofing materials and does not include repair orreplacement of roof deck, insulation, protection boards, drainage boards and trafficsurfacing used in conjunction with the plaza deck assembly not sold by GAF.10 years: NN-O-2-MS(PD), I-O-2-MS(PD), NN-O-2-TS(PD), I-O-2-TS(PD); 15 or 20 years: NN-O-3-MS(PD), I-O-3-MS(PD),NN-O-3-TS(PD), I-O-3-TS(PD)GAF will make repairs to GAF membrane, base flashing, insulation,expansion joint covers and pre-flashed accessories as shall benecessary solely in order to correct covered leaks. Warranty excludesrepair or replacement of materials not sold by GAF. Removal andreplacement of plaza deck assembly materials to expose the GAFmaterials shall be made at the sole cost of the Owner even if GAFdetermines the leak is covered by the GAF guarantee.None stated.Written notification within 30 days of discovery of leak to GAF ContractorServices Department, 1361 Alps Road, Building 7-1, Wayne, NJ 07470.Guarantee is expressly in lieu of any other guarantees and/or warrantiesand any other obligations or liability on the part of GAF, whether anyclaim is based upon strict liability, negligence, breach of warranty, or anyother theory or cause of action; excludes UCC warranties.Material and workmanship; GAF guarantees to make repairs to GAF roofing membrane,GAF base flashing, GAF expansion joint covers, GAF pre-flashed accessories and GAFlightweight concrete insulation as are necessary solely to correct leaks resulting fromnatural deterioration of GAF materials; blisters; bare spots; fishmouths; ridges; bucklesand wrinkles; splits not caused by structural failure or movement or cracks in substrate orroof base (other than the LWIC insulation) over which GAF materials are applied;workmanship in applying the GAF materials; and slippage of membrane or base flashing.GAF also warrants that, as to the LWIC insulation, the actual resistance to heat flowthrough the LWIC insulation will be at least 80% of the design thermal resistance and thatthe LWIC will not cause the roofing membrane to leak as a result of the vapor pressureeffects (blisters) of moisture retained within the LWIC or cause structural damage to thebuilding as a result of thermal or chemical reactions.5, 10 and 12 years: 3- or 4-ply GAFGLAS Ply 4 or Ply 6 Specifications,Ruberoid or Plus Specifications; 12 years: Ruberoid or PlusSpecifications; 15 or 20 years: 4-Ply GAFGLAS Ply 6 Specifications,Ruberoid Plus Specifications. Approved coating or asphalt and gravelmust be applied as top covering for smooth surface Ruberoid membraneto obtain 12 year guarantee.GAF will make repairs to GAF membrane, base flashing, expansion joint covers, preflashedaccessories and lightweight concrete insulation as shall be necessary solely inorder to correct covered leaks at no cost to owner. Warranty excludes repair orreplacement of roof deck or other materials not sold by GAF.Should the LWIC insulation fail to perform, GAF shall, at its own expense, (1) makeor cause to be made repairs or modifications to the LWIC insulation as GAF deemsappropriate so that the LWIC insulation will perform as warranted, and (2) repair orreplace the roof membrane to the extent that it is damaged as a result of the failure of theLWIC insulation to perform as warranted as a result of repairs or modifications to theLWIC insulation.None statedWritten notification within 30 days of discovery of leak or a failure of theLWIC insulation to GAF Contractor Services Department, 1361 AlpsRoad, Building 7-1, Wayne, NJ 07470.Guarantee is expressly in lieu of any other guarantees and/or warrantiesand any other obligations or liability on the part of GAF, whether anyclaim is based upon strict liability, negligence, breach of warranty or anyother theory or cause of action; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoNeutral (no provision) Neutral (no provision). Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including aliphatic or aromaticsolvents, chlorinated hydrocarbons, turpentine, oils, organic or inorganicpolar ma-terials), 15, 17, 18, 19, 20, 22. Also excludes any damageoccurring more than 30 days after discovery of a leak, unless GAF isnotified within 30 days of discovery.1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 13, 15, 17, 22, 24. Warranty also excludesnew penetrations, modifications or additions, damage resulting fromremoval of plaza decking material applied over the GAF roofingmaterials, and damage caused by vehicular traffic on the plaza deck.1, 2, 3, 4, 5, 6, 7 (not applicable to GAF insulation or GAF roof base), 8,9, 10, 11, 12, 13, 15, 17, 22, 24. Also excludes any damage occurringmore than 30 days after discovery of a leak unless GAF is notified within30 days of discovery, and damage due to underlying materials orstructures having failed or ceased to conform to GAF's or otherapplicable specifications as to roof slopes or other requirements.610

13. Wind coverage/exclusions Warranty excludes windstorms, hurricanes, and tornadoes.GAF indicates that there is no coverage for damage causedby wind.Warranty excludes windstorms, hurricanes, and tornadoes.GAF indicates that there is no coverage for damage caused bywind.Warranty excludes windstorms, hurricanes and tornadoes.GAF indicates that there is no coverage for damage caused bywind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, H, I. Also, warranty provides that cancellation of this warranty willresult if the roof is damaged by any cause listed above as a specificexclusion that will affect the integrity or watertightness of the roof.C, H, I, S. Also, guarantee states that cancellation of this guarantee willresult if roof is damaged by any cause listed as an exclusion (See Item12 above) if the damage affects the integrity or watertightness of the roofand owner does not promptly make repairs following notification by GAF.15. Cost to obtain None C, H, I, S. Also, guarantee states that cancellation of this guarantee willresult if roof is damaged by any cause listed as an exclusion (See Item12 above) if the damage affects the integrity or watertightness of the roofand owner does not promptly make repairs following notification by GAF.C, H, I, S. Also, the guarantee states that cancellation of this guarantee will result if roofis damaged by any cause listed as an exclusion if the damage affects the integrity orwatertightness of the roof and the owner does not promptly make repairs to rectify thedamage and preserve the integrity of the roof following notification by GAF.5 years: $6.00/square; 10 years: $10.00/square; 12 years:$12.00/square; 15 years: $14.00/square; 20 years:$19.00/square16. Minimum charge None 10 years: $800; 15 years: $1,000; 20 years: $1,200 5 yrs: $450; 10 yrs: $850; 12 yrs: $900; 15 yrs: $1,000; 20 yrs: $1,200Domed structures, heated tanks, storage silos, drying kilns, car wash17. Ineligible structure or building use buildings, swimming pools and other structures with abnormally highhumidityconditions, cold-storage and cooler buildings when the freezerHigh-humidity buildings (i.e., car washes, swimming pools), domed High-humidity buildings (i.e., car washes, swimming pools), domedstructures, heated tanks, storage silos, drying kilns, freezer or cooler structures, heated tanks, storage silos, drying kilns, freezer or cooleror cooler insulation is used as the base to receive the roofbuildings when freezer or cooler insulation is also the roof insulation. buildings when the freezer or cooler insulation is also the roof insulation.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsNoneContractor must submit a notice of award of contract at least ten daysprior to commencement, providing job details.None Yes Yes20. Job inspection policy No on-site inspections GAF territory manager makes on-site inspections prior to and duringapplication. GAF field technical representative makes on-siteinspections after completion prior to issuance of guarantee, as well astwo years after issuance of guarantee; no charge.Flood testing of all plaza deck roofing installations is required.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionNoneNo; GAF indicates that it does not carry insurance covering itswarranty obligations.Contractor obligated to make repairs to all leaks andworkmanship deficiencies for two years.No; GAF indicates it does not carry insurance covering itsguarantee obligations.The contractor must submit a notice of award of contract at least tendays prior to commencement, providing job details.GAF territory manager makes on-site inspections prior to and during application. GAFfield technical representative makes on-site inspections after completion prior to issuanceof warranty, as well as two years after issuance of warranty; no charge.Contractor obligated to make repairs to all leaks andworkmanship deficiencies for two years.No; GAF indicates it does not carry insurance covering itsguarantee obligations.GAF manufactures and sells the product. GAF manufactures and sells product. GAF manufactures and sells product.No renewal provision No renewal policy No renewal policy25. Assignability Not transferable or assignable in any manner Assignable to another owner only if (1) request is made inwriting 30 days after ownership transfer; (2) the visible GAFroofing materials and plaza deck are inspected and anyrequired repairs are completed at owner's expense; (3)proposed assignment is approved in writing by an authorizedGAF technical services manager; and (4) an assignment fee of$500 is paid to GAF. Otherwise, guarantee is not assignable,directly or indirectly.26. Special features/conditions The owner must sign and mail in GAF warranty registrationform within 30 days of roof completion in order for warranty tobe effective. No representative, employee, or agent of GAF, orany other person has any authority to assume for GAF anyadditional or other liability or responsibility. GAF shall not berespons-ible for or liable for any change or amendment to theGAF roof specifications in regard to the construction of the roof,unless the change or amendment to the specifications areapproved in writing by an authorized GAF technical servicemanager.Upon request by GAF, the owner shall remove (andsubsequently replace) all plaza deck assembly materials toexpose the GAFMC <strong>Roofing</strong> Materials to allow for inspectionand repair of the GAFMC <strong>Roofing</strong> Materials. Removal andreplacement of the plaza deck assembly materials shall bemade at the sole cost of the owner even if GAF determines thatthe leak is covered by this guarantee.No representative, employee, or agent of GAF, or any otherperson, has any authority to assume for GAF any additional orother liability or responsibility. GAF shall not be responsible foror liable for any change or amendment to the GAF roofspecifications, unless the change or amendment to thespecification is approved in writing by an authorized GAFtechnical service manager.27. Executed by owner Yes (See Special Features/Conditions.) No NoAssignable to another owner only if (1) request is made inwriting 30 days after ownership transfer; (2) membrane isinspected and any required repairs are completed at owner'sexpense; (3) proposed assignment is approved in writing by anauthorized GAF technical services manager; and (4) anassignment fee of $500 is paid to GAF. Otherwise, guaranteeis not assignable, directly or indirectly.Owner shall, at its expense, (a) perform regular inspections and maintenance; (b) keeprecords of all inspections and maintenance performed; and (c) perform repairs to the roofor other building components identified during inspections by GAF as being necessary topreserve the integrity of the GAF roofing materials. Failure of owner to perform workpromptly following written notification by GAF may result in cancellation of guarantee ifthe owner's failure results in damage to the GAF roofing materials.Owner shall, at its expense, remove (and, if desired, subsequently replace) anymaterials and equipment that impede inspection and repair of the GAF roofing materials,such as HVAC units and satellite dishes mounted so that there is no functional access tothe roof system, and precast concrete or rubber pavers, wood decking or steel gratingthat are installed over the GAF roofing materials.No representative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability or responsibility. GAF shallnot be responsible for or liable for any change or amendment to the GAF roofspecifications, unless the change or amendment to the specifications is approved inwriting by an authorized GAF technical service manager.In an emergency, the Owner may authorize or perform temporary repairs tominimize damage to the building or its contents. Such work will not result in thecancellation of guarantee provided that the temporary repairs are reasonable andcustomary, and do not result in permanent damage to the GAF membrane or baseflashing. Owner is responsible for all expenses associated with temporary repairs.No claim may be made in respect to thermal performance unless based on testscarried out by a qualified laboratory using tests and procedures satisfactory to GAF. GAFreserves the right to perform thermal testing on the LWIC insulation at its discretion and atits own cost.611

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity GAF Materials Corporation (GAF) GAF Materials Corporation (GAF) GenCorp, Inc.2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered"EverGuard Material Only Guarantee (A Limited Warranty);"January 1, 1998; Form 10512 1/98"EverGuard Silver Seal Guarantee;" January 1998; Form10511 1/98"Ten Year Membrane Only Warranty For CommercialBuildings"; 1997; 4-97All EverGuard Single-Ply Membrane Applications EverGuard Single-Ply Membrane Systems GenFlex Thermoplastic, PVC, and TPO membranes, GenFlexEPDM4. Scope of coverage Material only; GAF warrants that the EverGuard roof membraneand EverGuard coated metal and membrane flashing materialswill withstand ordinary wear and tear by the elements and willbe free of manufacturing defects which affect their ability tomaintain the roof in watertight condition.Material and workmanship; GAF guarantees to make repairs toGAF EverGuard roofing membrane, coated metal roof edgesand base flashing, membrane base flashing, expansion jointcovers, and pre-flashed accessories as are necessary tocorrect leaks resulting solely from natural deterioration of theEverGuard roofing materials and from workmanship in applyingthe EverGuard roofing materials.5. Length of coverage 10 years 10 years: All materials and systems15 years: Minimum .045" material, all systems20 years: Minimum .080" material, new/tear-off systems6. Nature of remedy GAF's sole responsibility is the repair or replacement, at GAF's option,of that portion of the EverGuard materials that contains manufacturingdefects or deterioration caused by ordinary wear and tear by theelements that have resulted in a roof leak. Repair or replacement of theroof deck or other roof components used with the EverGuard materials isnot included. If GAF determines there are manufacturing defectscovered by this warranty, GAF will repair or replace the EverGuardmaterials within 90 days after notification of leaks.GAF will make repairs to GAF EverGuard roofing membrane,coated metal roof edges and base flashing, membrane baseflashing, expansion joint covers, and pre-flashed accessoriesas shall be necessary to correct covered leaks at no cost toowner. Warranty excludes repair or replacement of insulation orother materials not sold by GAF7. Monetary limitations None stated GAF=s maximum liability shall not exceed in the aggregateover the life of guarantee more than the original cost of theGAF supplied materials and reasonable and customary cost oflabor used to install such materials.8. Notification requirements Written notice within 30 days of discovery of leak to GAFEverGuard Contractor Services Department, 1361 Alps Road,Building 7, Wayne, NJ 07470. Notice to the roofing contractoris not notice to GAF.9. Exclusive or additional remedy Warranty is expressly in lieu of any other guarantees and/or warrantiesand any other obligations or liability on the part of GAF whether anyclaim is based upon strict liability, negligence, breach of warranty, or anyother theory or cause of action; excludes UCC warranties. Norepresentative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability orresponsibility.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Written notification within 30 days of discovery of leak to GAFContractor Services Department, 1361 Alps Road, Building 7,Wayne, NJ 07470. Notice to roofing contractor is not notice toGAF.Guarantee is expressly in lieu of any other guarantees and/or warrantiesand any other obligations or liability on the part of GAF, whether anyclaim is based upon strict liability, negligence, breach of warranty, or anyother theory or cause of action; excludes UCC warranties. Norepresentative, employee, or agent of GAF, or any other person, has anyauthority to assume for GAF any additional or other liability orresponsibility.No No NoMaterial only; GenCorp warrants that the roofing membrane willnot deteriorate to the point of causing leaks through themembrane due to normal weathering. Warranty applies only toroofing membrane and does not apply to labor, materials, orconstruction details.10 yearsGAF=s determination Neutral (no provision) Neutral1,2,3,4,5,6,7,8,9,10,11 12,13,15,17,19,20,22,24 1, 2, 3, 4, 5, 6, 7 (not applicable to GAF insulation or GAF roofbase), 8, 9, 10, 11, 12, 13, 15, 17, 2213. Wind coverage/exclusions Warranty excludes windstorms, hurricanes and tornadoes.GAF indicates that there is no coverage for damage caused bywind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Warranty states that cancellation of this warranty will result ifthe roof is damaged by any cause listed as an exclusion (SeeItem 12 above) if the damage affects the integrity orwatertightness of the roof.15. Cost to obtain None 10 years: $4.00/square15 years: $6.00/square20 years: $8.00/squareGAF indicates warranty covers roof damage resulting from wind speedsup to 60 mph. Warranty excludes roof damage resulting fromwindstorms above 60 mph, hurricanes and tornadoes.C, H, I, S. Also, guarantee states that guarantee will becanceled if roof is damaged by any cause listed as an exclusion(See Item 12 above) if the damage affects the integrity orwatertightness of the roof and owner does not promptly makerepairs following notification by GAF.GenCorp will, at its option, either repair the membrane or issuecredit against the purchase of a new roofing membrane fromGenCorp, prorated based on months of service.Credit issued by GenCorp shall be determined by multiplyingthe current price of replacement membrane by a fraction, thenumerator of which is the remaining months of the warrantyand the denominator of which is the total number of months thewarranty is to be in effect.Written notice within 30 days of discovery of any leak andwarranty claim by certified mail to GenFlex <strong>Roofing</strong> Systems,1722 Indian Wood Circle, Maumee, Ohio 43537, Attention:Technical Department.Remedy stated in warranty is sole and exclusive remedy forfailure of the roofing membrane; no other express warranties;excludes UCC warranties.1, 2, 3, 4, 5, 6, 9, 10, 11, 12, 13, 24. (Warranty also specificallyexcludes damages caused by insects and animals.)Warranty excludes damage resulting from wind gusts in excessof 54 mph and hurricanes.B, C, D, H, KNone612

16. Minimum charge None 10 years: $400 20 years; $90015 years: $60017. Ineligible structure or building use Private residences, walking decks, applications over buildingswith high internal humidity, freezer buildings or buildings usedfor cold storage unless approved in writing in advance by GAF.18. Pre-construction notice andapproval requirementsPre-installation form is submitted by contractor, reviewed byContractor Services department, project acceptance is faxedand/or mailed back to contractor.Private residences, walking decks, buildings with high internalhumidity, freezer buildings or buildings used for cold storageunless approved in writing in advance by GAFPre-installation form is submitted by contractor, reviewed byContractor Services department, project acceptance is faxedand/or mailed back to contractor.NonePrivate residences, walking decksNone19. Approved, authorized, or licensedrequirements20. Job inspection policy No on-site inspections21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells productsYes Yes NoNone; material-only guaranteeNo; GAF indicates it does not carry insurance covering itsguarantee obligations.GAF technical field representative makes on-site inspectionsprior to and during (as required by project size and projectspecifications) and after application, as well as two years afterissuance of warranty; no charge.Contractor obligated to make repairs to all leaks andworkmanship deficiencies for two years.No; GAF indicates it does not carry insurance covering itsguarantee obligationsNo on-site inspectionsNone; material-only warrantyNo; GenCorp indicates that it is self-insured.GAF sells products only. GAF sells products only. GenCorp manufactures and sells GenFlex thermoplastic PVCand TPO membranes and only sells GenFlex EPDM.24. Conditions for renewal orextensionNo renewal provision. No renewal provision. No renewal provision25. Assignability Not transferable or assignable in any manner. Assignable to another owner only if (1) request is made inwriting 30 days after ownership transfer; (2) membrane isinspected and any required repairs are completed at ownersexpense; (3) proposed assignment is approved in writing by anauthorized GAF technical services manager; and (4) anassignment fee of $500 is paid to GAF. Otherwise guarantee isnot assignable, directly or indirectly.Warranty may not be transferred upon change of ownershipunless the owner (a) notifies GenCorp in writing of proposedchange at least 45 days prior to change, (b) pays GenCorp thewarranty transfer fee in effect on the date the warranty wasissued, and (c) completes all repairs required by GenCorp inorder to comply with the owner's obligations under thiswarranty.26. Special features/conditions The owner must initiate and follow a 9-point maintenanceprogram prescribed by GAF on the reverse side of guaranteeincluding: (1) maintaining a file showing all inspections,repairs, original construction drawings and specifications; (2)inspecting roof at least semiannually; (3) inspecting roof fordamage after severe weather conditions; (4) repairing nonguaranteedconditions affecting the GAF roof system; (5)removing any debris; (6) examining/reattaching loosemetalwork; (7) repairing loose masonry/coping stones; (8)examining roof top equipment to determine if they moveexcessively or leak; and (9) minimize rooftop traffic.GAF shall not be responsible for or liable for any change oramendment to the GAF specifications, unless the change oramendment to the specifications is approved in writing by anauthorized GAF Contractor Services manager.Owner shall, at its expense, (a) perform regular inspections andmaintenance; (b) keep records of all inspections and maintenanceperformed; and (c) perform repairs to the roof or other buildingcomponents identified during inspections by GAF as being necessary topreserve the integrity of the GAF roofing materials. Failure of owner toperform work promptly following written notification by GAF may result incancellation of guarantee if the owner=s failure results in damage to theGAF roofing materials.Owner shall, at its expense, remove (and, if desired, subsequentlyreplace) any materials and equipment that impede inspection and repairof the GAF roofing materials, such as HVAC units and satellite dishesmounted so that there is no functional access to the roof system, andprecast concrete or rubber pavers, wood decking or steel grating thatare installed over the GAF roofing materials.GAF shall not be responsible for or liable for any change oramendment to the GAF roof specifications in regard to the roofconstruction, unless the change or amendment to the specifications isapproved in writing by an authorized GAF Contractor Services manager.In an emergency, the Owner may authorize or perform temporaryrepairs to minimize damage to the building or its contents. Such work willnot result in the cancellation of guarantee provided that the temporaryrepairs are reasonable and customary, and do not result in permanentdamage to the GAF membrane or base flashing. Owner is responsiblefor all expenses associated with temporary repairsWhile GenCorp reserves the right to suspend its obligationsunder the warranty if all bills for installation, supplies, andservice have not been paid in full to the roofing contractor andmaterial suppliers, the sole and exclusive remedy provision forfailure of the roofing membrane and exclusion of otherwarranties, including UCC warranties, remains in full force andeffect.Any claim or dispute between owner and GenCorp arisingout of the warranty or relating to any material supplied orspecifically required by GenCorp shall be resolved by final andbinding arbitration in accordance with the rules of the AmericanArbitration <strong>Association</strong>.No representative has authority to make anyrepresentations other than those stated in warranty.27. Executed by owner Yes; owner must sign and mail in warranty registration formwiithin 30 days of roof completion.NoRegistration form is to be completed and submitted to GenFlex<strong>Roofing</strong> Systems in Maumee, Ohio.613

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity GenCorp Inc. GenCorp Inc. GenCorp Inc.2. Title, original publication date, andidentifying symbol, if any"Thermoplastic <strong>Roofing</strong> System Warranty"; 1996; 10-96 "EPDM <strong>Roofing</strong> System Warranty"; 1996; 10-96 "Limited Membrane Only Warranty;" 1996; 10-963. Product, specification, or systemcoveredGenFlex PVC and GenFlex TPO <strong>Roofing</strong> Systems GenFlex EPDM GenFlex Thermoplastic PVC and TPO membranes, GenFlexEPDM4. Scope of coverage Material and workmanship; GenCorp warrants that it will repair leaks inthe GenFlex RM or GenFlex TPO roofing system caused by a defect inGenFlex brand materials or workmanship of the GenFlex authorizedcontractor. The roofing system consists of GenFlex RM or GenFlex TPObrand membrane, GenFlex brand insulation, fasteners, adhesives,sealants, flashings, fastener plates, metal bars and related GenFlexbrand accessory items when used in accordance with GenFlex'spublished written technical specifications.Material and workmanship; GenCorp warrants that it will repair leaks inthe GenFlex EPDM roofing system caused by a defect in GenFlex brandmaterials or workmanship of the GenFlex authorized contractor. Theroofing system consists of GenFlex EPDM brand membrane, GenFlexbrand insulation, fasteners, adhesives, sealants, flashings, roofingtapes, fastener plates, metal bars, and related GenFlex EPDM brandaccessory items when used in accordance with GenFlex's publishedwritten technical specifications.Material only; GenCorp warrants that the roofing membrane willnot deteriorate to the point of causing leaks through themembrane due to normal weathering. Warranty applies only toroofing membrane and does not apply to labor, materials, orconstruction details.5. Length of coverage 5, 10, 15 or 20 years 5, 10, 15 or 20 years 5, 10, 15 or 20 years. In order to obtain 20 year coverage,thermoplastic membranes must be at least .060 mils.6. Nature of remedy If there is a leak caused by a defect in GenFlex brand materialsor workmanship, GenCorp will repair the leak.If there is a leak caused by a defect in GenFlex brand materialsor workmanship, GenCorp will repair the leak.GenCorp will, at its option, either repair the membrane or issuecredit against the purchase of a new roofing membrane fromGenCorp, prorated based on months of service.7. Monetary limitations None stated. None stated. Credit issued by GenCorp shall be determined by multiplyingthe current price of replacement membrane by a fraction, thenumerator of which is the remaining months of the warrantyand the denominator of which is the total number of months thewarranty is to be in effect.8. Notification requirements Written notice within 30 days of discovery of any leak and anywarranty claim by certified mail to GenFlex <strong>Roofing</strong> Systems,1722 Indian Wood Circle, Maumee, Ohio 43537, Attention:Technical Department.Written notice within 30 days of discovery of any leak and anywarranty claim by certified mail to GenFlex <strong>Roofing</strong> Systems,1722 Indian Wood Circle, Maumee, OH 43537, Attention:Technical DepartmentWritten notice within 30 days of discovery of any leak and anywarranty claim by certified mail to GenFlex <strong>Roofing</strong> Systems,1722 Indian Wood Circle, Maumee, OH 43537, Attention:Technical Department.9. Exclusive or additional remedy Remedy stated in warranty is sole and exclusive remedy forfailure of the system; no other express warranties; excludesUCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)The owner's sole and exclusive remedy for failure of thesystem; excludes UCC warranties.No No NoNeutral GenCorp's determination Neutral1,2,3,4,5,6,7,9,10,12 (see Special Features/Conditions), 1-3,17,24. (Warranty also specifically excludes damages causedby insects and animals.)13. Wind coverage/exclusions Warranty excludes roof damage resulting from wind gusts inexcess of 54 mph and hurricanes. GenCorp indicates that,when a request is made prior to bidding and after a specificroof system design criteria is met, GenCorp's "Thermoplastic<strong>Roofing</strong> System High Wind Warranty" covering winds of peakgusts up to 100 mph may be obtained. GenFlex TechnicalDepartment must be contacted for approval.1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12 (see Special Features/Conditions),13, 17, 24. (Warranty also excludes damages causedby insects and animals.)Warranty excludes roof damage resulting from wind gusts inexcess of 54 mph and hurricanes. GenCorp indicates that,when a request is made prior to bidding and after a specificroof system design criteria is met, GenCorps "EPDM <strong>Roofing</strong>System High Wind Warranty" covering winds of peak gusts upto 100 mph may be obtained. GenFlex Technical Departmentmust be contacted for approval.Remedy stated in warranty is the sole and exclusive remedy forfailure of the roofing membrane; no other express warranties;excludes UCC warranties.1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12 (see SpecialFeatures/Conditions), 13, 17, 24. Warranty also specificallyexcludes damages caused by insects and animals.Warranty excludes roof damage resulting from wind gusts inexcess of 54 mph and hurricanes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C (Warranty may also be suspended if owner fails toreimburse GenCorp for investigation costs if GenCorp'sinvestigation reveals that GenCorp is not responsible forowner's claim.), D, H, K15. Cost to obtain 5 yrs: $3.00/sq; 10 yrs: $6.00/sq; 15 yrs: $8.00/sq;20 yrs: $10.00 sq.B, C (Warranty may also be suspended if owner fails toreimburse GenCorp for investigation costs if GenCorp'sinvestigation reveals that GenCorp is not responsible forowner's claim.), D, H, K5 ys: $3.00/sq; 10 yrs: $5.00/sq; 15 yrs: $8.00/sq;20 yrs: $10.00/sqB, C (warranty may also be suspended if owner fails toreimburse GenCorp for investigation costs if GenCorp'sinvestigation reveals that GenCorp is not responsible forowner's claim), D, H, K10 years: no charge; 15 years: $100; 20 years: $200614

16. Minimum charge 5 years: $250; 10 years: $300; 15 years: $400: 20 years: $550 5 years: $250; 10 years: $300; 15 years: $400; 20 years: $550 10 years: no charge; 15 years: $100; 20 years: $200.17. Ineligible structure or building use Private residences, walking decks Private residences, walking decks Private residences, walking decks18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsAuthorized contractor must submit pre-job survey form toGenCorp technical department in Maumee, OhioAuthorized contractor must submit pre-job survey form toGenCorp technical department in Maumee, OhioYes Yes Yes20. Job inspection policy Upon request or dependent on GenCorp=s evaluation,GenCorp technical representative makes on-site inspectionsprior to, during application, and after completion prior toissuance of warranty, no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionThe contractor is obligated to make repairs to workmanshipdeficiencies for two years.Upon request or GenFlex evaluation, a GenFlex technicalrepresentative makes on-site inspection prior to, duringapplication and after completion prior to issuance of warranty;no charge.The contractor is obligated to make repairs to workmanshipdeficiencies for two years.Authorized contractor must submit pre-job survey form toGenFlex <strong>Roofing</strong> Systems technical department in Maumee,Ohio.No on-site inspectionsNone; material-only warrantyNo; GenCorp indicates that it is self-insured. No; GenCorp indicates that it is self-insured. No; GenCorp indicates that it is self-insured.GenCorp manufactures and sells GenFlex PVC and TPOthermoplastic membranes.No renewal provision25. Assignability Warranty may not be transferred upon change of ownershipunless the owner (a) notifies GenCorp in writing of proposedchange at least 45 days prior to change (b) pays GenCorp thewarranty transfer fee in effect on the date the warranty wasissued, and (c) completes all repairs required by GenCorp inorder to comply with owner's obligations under this warranty.26. Special features/conditions If GenCorp=s investigation of any claim reveals that GenCorpis not responsible for owner's claim, owner shall promptlyreimburse GenCorp for the investigation and repair costsincurred by GenCorp.While GenCorp reserves the right to suspend its warrantyobligations if all bills for installation have not been paid, or thewarranty fee has not been paid or if the owner has notreimbursed GenCorp for claim investigation costs, the sole andexclusive remedy provision for failure of the roof membraneand exclusion of other warranties, including UCC warranties,remains in full force and effect.Warranty requires compliance with GenFlex maintenanceand care requirements stated on reverse side of warranty,including at least twice yearly inspections; ponded water will notbe allowed; roof must have slope to drain and all drain areasmust remain clear; regular cleaning in areas wherecontaminants (i.e., oil, grease, freon, acids, solvents) potentiallyharmful to the roof system may accumulate; protectivewalkways for roof traffic; maintenance of counterflashing, metalwork, equipment curb and supports, pitch pockets, caulking,walk pads, and any other roof top accessories.Any claim or dispute between owner and GenCorp arisingout of warranty or relating to any material supplied orspecifically required by GenCorp shall be resolved by final andbinding arbitration in accordance with the rules of the AmericanArbitration <strong>Association</strong>.No representative has authority to make anyrepresentations other than those stated in the warranty.GenCorp sells product only.No renewal provisionWarranty may not be transferred upon change of ownershipunless the owner (a) notifies GenCorp in writing of its proposedchange at least 45 days prior to the change, (b) pays GenCorpthe warranty transfer fee in effect on the date the warranty wasissued, and (c) completes all repairs required by GenCorp inorder to correct failures to comply with owner's obligationsunder the warranty.If GenCorp's investigation of any claim reveals that GenCorp isnot responsible for owner's claim, owner shall promptlyreimburse GenCorp for the investigation and repair costsincurred by GenCorp.While GenCorp reserves the right to suspend its warrantyobligations if all bills for installation have not been paid, or thewarranty fee has not been paid or if the owner has notreimbursed GenCorp for claim investigation costs, the sole andexclusive remedy provision for failure of the roof membraneand exclusion of other warranties, including UCC warranties,remains in full force and effect.Warranty requires compliance with GenFlex maintenanceand care requirements stated on reverse side of warranty,including at least twice yearly inspections; ponded water will notbe allowed; roof must have slope to drain and all drain areasmust remain clear; regular cleaning in areas wherecontaminants (i.e., oil, grease, freon, acids, solvents) potentiallyharmful to the roof system may accumulate; protectivewalkways for roof traffic; maintenance of counterflashing, metalwork, equipment curb and supports, pitch pockets, caulking,walk pads, and any other roof top accessories.Any claim or dispute between owner and GenCorp arisingout of warranty or relating to any material supplied orspecifically required by GenCorp shall be resolved by final andbinding arbitration in accordance with the rules of the AmericanArbitration <strong>Association</strong>.No representative has authority to make anyrepresentations other than those stated in the warranty.GenCorp manufactures and sells GenFlex thermoplastic PVCand TPO membranes and only sells GenFlex EPDM.No renewal provisionWarranty may not be transferred upon change of ownershipunless the owner (a) notifies GenCorp in writing of proposedchange at least 45 days prior to change, (b) pays GenCorp thewarranty transfer fee in effect on the date the warranty wasissued, and (c) completes all repairs required by GenCorp inorder to comply with the owner's obligations under thiswarranty.If GenCorp's investigation of any claim reveals that GenCorp isnot responsible for owner's claim, owner shall promptlyreimburse GenCorp for the investigation an repair costsincurred by GenCorp.While GenCor reserves the right to suspend its warrantyobligations if all bills for installation have not been paid, or thewarranty fee has not been paid or if the owner has notreimbursed GenCor for claim investigation costs, the sole andexclusive remedy provision for failure of the roof membraneand exclusion of other warranties, including UCC warranties,remains in full force and effect.Warranty requires compliance with GenFlex maintenanceand care requirements stated on reverse side of warranty,including at least twice yearly inspections; ponded water will notbe allowed; roof must have slope to drain and all drain areasmust remain clear; regular cleaning in areas wherecontaminants (i.e., oil, grease, freon, acids, solvents) potentiallyharmful to the roof system may accumulate; protectivewalkways for roof traffic; maintenance of counterflashing, metalwork, equipment curb and supports, pitch pockets, caulking,walk pads, and any other roof top accessories.Any claim or dispute between owner and GenCorp arisingout of warranty or relating to any material supplied orspecifically required by GenCorp shall be resolved by final andbinding arbitration in accordance with the rules of the AmericanArbitration <strong>Association</strong>.No representative has authority to make anyrepresentations other than those stated in the warranty.27. Executed by owner No No No615

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity W.R. Grace & Co. - Conn. W.R. Grace & Co. - Conn. W.R. Grace & Co. - Conn.2. Title, original publication date, andidentifying symbol, if any"PRMA System Platinum 15 Year Material and LaborWarranty"; June 1997; PRMA-032 6/97"PRMA System 10 Year Material Warranty"; June 1997;PRMA-031 6/97"PRMA System Gold 10 Year Material and Labor Warranty";June 1997; PRMA-035 6/973. Product, specification, or systemcoveredPRMA membrane PRMA Membrane PRMA membrane4. Scope of coverage Material and workmanship; Grace agrees to make or cause tobe made, at Grace's expense, all repairs necessary to correctleaks to the Grace PRMA System, resulting from systemmembrane deterioration as a result of ordinary wear and tearand the effects thereof; improper workmanship by thecontractor in the installation of the System; splits in the PRMASystem membrane; temperature fluctuations or thermal shock;and System membrane slippage.Material only; Grace warrants that water will not leak directlythrough any individual sheet of PRMA membrane as a result ofdeterioration of the sheet caused by ordinary wear and tear andthe effects thereof and the PRMA membrane will bridgeruptures caused by cracking of the immediate substrate up to1.6 mm (0.0625 in.) in width.Material and workmanship; Grace agrees to make or cause tobe made, at Grace's expense, all repairs necessary to correctleaks to the Grace PRMA System resulting from systemmembrane deterioration as a result of ordinary wear and tearand the effects thereof; improper workmanship by thecontractor in the installation of the PRMA System; splits in theSystem membrane; temperature fluctuations or thermal shock;and System membrane slippage.5. Length of coverage 15 years 10 years 10 years6. Nature of remedy Grace agrees to make or cause to be made, at Grace'sexpense, all repairs necessary to correct leaks. Cost forremoving ballast or removable pavers is the responsibility ofGrace. Cost for removing solid or inter-locking pavers orotherwise exposing the PRMA System from structural or solidoverburden is the responsibility of owner.Grace will supply replacement PRMA membrane, andaccessory products deemed necessary and approved by Graceequal to the cost of materials paid to Grace for the originalinstallation. Warrants does not cover any costs or expensesassociated with labor costs for the removal of ballast or paversor otherwise exposing the PRMA membrane and installation ofreplacement membrane.Grace agrees to make or cause to be made, at Grace'sexpense, repairs necessary to correct leaks. Costs for remoingballast or removable pavers is the reponsibility of Grace. Costfor removing solid or interlocking pavers or otherwise exposingthe PRMA system is the responsibility of owner.7. Monetary limitations Grace's total liability shall not exceed the cost of materialsrequired and approved by Grace for repair plus labor costs forrepair activities also approved by Grace.8. Notification requirements Written notice within 30 days from the date of discovery of theneed for any repair or the date such need should reasonablyhave been discovered that may be a responsibility of Grace.9. Exclusive or additional remedy Owner waives any and all other claims, actions, and demandsrelating to the use of the PRMA System. Statements,obligations and representations contained in warranty andmade expressly in lieu of all other warranties; excludes UCCwarranties.Grace's liability to provide replacement material is limited to thecost of materials paid to Grace for the original installation.None stated.Owner waives any and all other claims, actions, and demandsrelating to the use of the PRMA System. Statements,obligations, and representations contained in the warranty andmade expressly in lieu of all other warranties; excludes UCCwarranties.Grace's total liability shall not exceed the cost of materialsrequired and approved by Grace for repair plus labor costs forrepair activities approved by Grace.Written notice within 30 days from the date of discovery of theneed for any repair or the date such need should reasonablyhave been discovered that may be a responsibility of Grace.Owner waives any and all other claims, actions, and demandsrelating to the use of the PRMA System. Statements,obligations, and representations contained in warranty aremade expressly in lieu of all other warranties; excludes UCCwarranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)No No NoNeutral Grace's determination Neutral1, 2, 3, 4, 6, 7, 8, 10, 15 1, 3, 15, 17 1, 2, 3, 4, 6, 7, 8, 10, 1513. Wind coverage/exclusions Warranty excludes windstorms, hurricanes and tornadoes.Grace indicates there is no coverage for damage caused bywind.No coverage for damage caused by wind.Warranty excludes windstorms, hurricanes and tornadoes.Grace indicates there is no coverage for damage caused bywind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, I R C, I15. Cost to obtain $4.50/square $1.50/square $2.50/square616

16. Minimum charge $450 $150 $25017. Ineligible structure or building use None None None18. Pre-construction notice andapproval requirementsGrace requires contractor to give a pre-job report prior tocommencement of installation.Grace requires contractor to provide a pre-job report prior tocommencement of installation.Grace requires contractor to give a pre-job report prior tocommencement of installation.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Grace representative makes on-site inspections prior to andafter completion, prior to issuance of warranty, as well as twoyears after issuing warranty; no charge.Grace representative makes on-site inspections prior to andafter completion, prior to issuance of warranty, as well as twoyears after issuing warranty; no charge.Grace representative makes on-site inspections prior to andafter completion, prior to issuance of warranty, as well as twoyears after issuing warranty; no charge.21. Contractor’s post-installationobligationContractor obligated to make repairs to workmanshipdeficiencies for two years.Although this is a material-only warranty, contractor obligated tomake repairs to workmanship deficiencies for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; Grace indicates that it does not carry insurance covering itswarranty obligations.No; Grace indicates that it does not carry insurance covering itswarranty obligations.No; Grace indicates that it does not carry insurance covering itswarranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionGrace manufactures and sells product. Grace manufactures and sells product. Grace manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability Not assignable No restrictions stated. Assignable provided (1) Grace is given not less than 30 dayswritten notice prior to transfer and the intended building use isstated and approved by Grace, (2) an inspection of thestructure is made by Grace, (3) all repairs deemed necessaryby Grace are made at owner's expense and such repairs areinspected and approved by Grace, (4) Grace's then-currentinspection and processing fee is paid to Grace.26. Special features/conditions PRMA System shall be maintaned by owner in accordance withsuch instructions of Grace as may be in effect from time totime.Warranty provides that Grace shall not be liable for penaldamages.27. Executed by owner Yes; warranty is to be signed and "accepted" by owner andinstalling contractor.Warranty provides that Grace shall not be liable for penaldamages.Yes; warranty is to be signed and "accepted" by owner andinstalling contractor.PRMA System must be maintained by owner in accordancewith such instructions of Grace as may be in effect from time totime.Warranty provides that Grace shall not be liable for penaldamages.Yes; warranty is to be signed and "accepted" by owner andinstalling contractor.617

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Henry Company Henry Company Herbert Malarkey <strong>Roofing</strong> Company2. Title, original publication date, andidentifying symbol, if anyHenry Company 'Ten and Ten Roof' Membrane Warranty ATwenty Year Full Value Warranty With Maintenance TreatmentDuring Tenth Anniversary Year; February 1985Henry Company Roof Membrane Limited Warranty; February1985Malarkey <strong>Roofing</strong> System Warranty3. Product, specification, or systemcoveredBuilt-up roofing specifications HM107W, HM107C,HM107-IW, HM107-IC, HM107-5, HM107LWC, HM106W,HM106-IWBuilt-up roofing specifications HM106W, HM106C, HCA80WHCG203WAll eligible built-up roofing specifications with a #502 mineralcap sheet; modified bitumen specifications #601 SBS mineralcap sheet, #625 Paragon SBS mineral cap sheet, #650Panoply SBS mineral cap sheet, #917 SBS mineral cap sheet,#919 SBS smooth cap sheet4. Scope of coverage Material and workmanship: Henry Company warrants the roofmembrane against leaks and will cause to be repaired at nocost to the building leaks occurring in the roof membrane thatare due to ordinary wear of the elements.Material and workmanship; Henry Company willcause to be repaired at no cost to the building owner leaksoccurring in the roof membrane that are due to ordinary wear ofthe elements. Roof membrane does not include and warrantyexcludes roof insulation, vapor retarder, roof deck, drains,expansion joints, metal or plastic fittings, vents, skylights, andreflective coating.Material and workmanship; Malarkey warrants that the roof systemwill remain in a watertight condition or Malarkey will initiate repairsat its own expense if required as a result of deterioration of theMalarkey roofing membrane or base flashing system resulting fromordinary wear and tear of the elements; workmanship on the part ofthe Malarkey approved roofing contractor in application of theMalarkey roofing membrane or base flashing system; blisters, barespots, fishmouths, wrinkles, or ridges in the roof system; splits inthe Malarkey roofing membrane not caused by structural movementor failure or movement of any material underlying the roofingmembrane or base flashing; or slippage of the roofing membrane orbase flashing.5. Length of coverage 20 years, provided owner pays for maintenance, repair, andcoating determined by Henry after initial 10 years (SeeConditions for Renewal or Extension.)10 years 10, 12, 15, or 20 years6. Nature of remedy Henry will make or cause to be made repairs necessary tomaintain the roof membrane in a watertight condition.Henry will make or cause to be made any repairs necessary tomaintain roof membrane in a watertight condition.Malarkey will be liable only for the cost of repair of the existing roofmembrane or installation of a replacement roof membrane;Malarkey's sole liability resulting from any failure of the roof systemshall be cost of repair or replacement.7. Monetary limitations None stated Henry Company shall be discharged of all further liabilitywhenever the cost to Henry of all covered roof membranerepairs equals warranty amount.Warranty includes space for Malarkey's maximum liability to beinserted. (Malarkey indicates that 10-year warranty can bepurchased with a $35/square or $50/square maximum liabilitylimitation or can be purchased without a maximum Malarkey liabilitylimitation and that 12, 15, and 20 year warranties can be obtainedwithout a maximum Malarkey liability limitation.)8. Notification requirements Written notice within 30 days of discovery of leak to HenryCompany, 2911 Slauson Ave., Huntington Park, CA 90255Written notice within 30 days of discovery of leak to HenryCompany, 2911 Slauson Ave., Huntington Park, CA 90255Written notification by registered or certified mail within 30 daysafter the leak is discovered or should, by reasonable diligence, havebeen discovered to Malarkey <strong>Roofing</strong> Company, P.O. Box 17217,Portland, OR 972179. Exclusive or additional remedy Warranty shall be the only obligation of Henry Company, withrespect to the roof membrane; excludes all other warranties;seeks to exclude UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Warranty shall be the only obligation of Henry Company, withrespect to the roof membrane; excludes all other warranties;seeks to exclude UCC warranties.No No NoNeutral (no provision) Neutral (no provision) Neutral (no provision)1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 16, 18, 20, 22, 23, 24. (Warrantyalso excludes construction inside the building, including theremoval or addition of walls or ceiling structures, that affects theintegrity of the roof membrane.)1, 2, 3, 4, 5, 8, 9, 10, 11, 18, 22, 23. Warrantyalso excludes construction inside the building, in-cluding theremoval or addition of walls, that influences the integrity of theroof membrane.Warranty is in lieu of and excludes all other warranties,guarantees or obligations; warranty seeks to exclude UCCwarranties.1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 15, 17, 23618

13. Wind coverage/exclusions Warranty covers roof damage resulting from wind speeds up to46 miles per hour.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Warranty covers roof damage resulting from wind speeds up to46 miles per hour.B, D, F, H B, H, S C15. Cost to obtain $10.00/square $10.00/squareWarranty excludes windstorms, hurricanes, and tornadoes.Malarkey indicates that there is no coverage for damagecaused by wind.10 years (with $35/square monetary limitation):$4.00/square; 10 years (with $50/square monetary limitation):$4.50/square; 10 years (without monetary limitation):$6.00/square; 12 years: $8.00/square 15 years: $10.00/square;20 years: $15.00/square16. Minimum charge $1,000 $1,000 10 yrs (with $35/sq monetary limitation): $400; 10 yrs (with$50/sq monetary limitation): $450; 10 yrs (without monetarylimitation): $600; 12 yrs: $800; 15 yrs: $1,000; 20 yrs: $1,50017. Ineligible structure or building use Cold-storage facilities and most apartment buildings andcondominiums. All structures and locations subject to approvalby Henry Company.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsPrior approval issued by execution of warranty application formand preconstruction notice 72 hours in advance.Cold-storage and most apartment buildings and condominiums;all structures and locations subject to approval by HenryCompany.Prior approval issued by execution of warranty application formand preconstruction notice 72 hours in advance.Yes Yes Yes20. Job inspection policy Henry inspector makes on-site inspections prior to, during (dailyto periodical), and after application, as well as two years afterissuance of warranty; $1.00/square charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionContractor obligated to make repairs to workmanshipdeficiencies for two years.No; Henry Company indicates that it does not carry insurancecovering its warranty obligations.Henry inspector makes on-site inspections prior to and duringapplication (daily to periodical) and after application, as well astwo years after issuance of warranty; $1.00/square charge.Contractor obligated to make repairs to workmanshipdeficiencies for two years.No; Henry Company indicates that it does not carry insurancecovering its warranty obligations.Cold storage, single familyWarranty application must be filed with and approved byMalarkey prior to job start.Malarkey representative makes inspections prior, during, andafter application depending upon size; no charge.Contractor is obligated to make repairs to all leaks and anydefects for two years.No; Malarkey indicates that it does not carry insurance coveringits warranty obligations.Henry Company manufactures and sells product. Henry Company manufactures and sells the product. Malarkey manufactures and sells productAfter 10 years, warranty can be extended for additional 10years. During tenth year following installation, a Henryrepresentative will inspect the roof and report any routinemaintenance determined by Henry Company to be necessaryto maintain integrity of the roof membrane and flashing for theremaining 10-year period of the warranty term. The cost of suchrepair and coating will be the responsibility of the buildingowner; no additional warranty fee.25. Assignability Warranty may be transferred to a new building owner with priorwritten consent of Henry Company, which consent shall not beunreasonably withheld; consent shall not be determined to beunreasonably withheld if the use of the building by any owner ismaterially different from the use of the prior building owner.26. Special features/conditions In the event an emergency condition exists requiring immediaterepair to avoid significant damage to the building, the buildingowner may make such temporary repairs as may be necessary torepair such leaks and such action shall not void warranty. In theevent the building owner fails to proceed with maintenancerecommended by Henry Company after 10 years, Henry Companyshall be discharged from all further obligation under warranty at theend of the 10th year of warranty.No renewal provisionTransferable to new building owner, provided theuse to which the new owner puts the building is approved byHenry Company. Building owner shall notify Henry Companyprior to making any transfer of ownership.In the event an emergency condition exists requiring immediaterepair to avoid significant damage to owner, the owner maymake temporary repairs as maybe essential and such action shall not void warranty.27. Executed by owner No No NoThe owner has option to renew for ___ years by requestinginspection by Malarkey. Malarkey inspects and advises ownerof necessary maintenance work to be performed by approvedcontractor at owner's expense. If work performed within 90days of expiration and Malarkey, then accepts the roof, uponpayment of charge not to exceed the current initialcharge, the warranty will be renewed.The warranty is transferable provided that Malarkey is notifiedby the original owner at least seven days prior to transfer.Malarkey schedules a roof inspection. Any repairs coveredunder the warranty will be paid for by Malarkey; the owner paysfor maintenance items and/or incidental repairs found to berequired. Once maintenance and/or repairs have beencompleted by a Malarkey approved roofing contractor, warrantytransfer will be completed after payment of a $500 transfer fee.Warranty is only valid when Malarkey pre-approved asphalt,base flashing system, and roof insulation when the roof isinsulated are used.619

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Imper Italia S.p.A.Intec/Permaglas,a division of U.S. Intec, Inc.International Diamond 105 Non-Penetrating<strong>Roofing</strong> Systems, Inc. (IDS)2. Title, original publication date,and identifying symbol, if anyImper Italia <strong>Roofing</strong> Membrane Guarantee <strong>Roofing</strong> System Guarantee; September 1996 Limited Workmanship Warranty; Revised 12/953. Product, specification, or systemcoveredParalon NT4, Arwenol ARD/S4. Scope of coverage Material only. Imper Italia guarantee agrees to providereplacement material resulting from all manufacturing defectsto restore roof to watertight condition.Built-up roofing specifications: See specification manual for detailsA: G-B4UP-M B: M-84UP=N M-4TP-RI C: ERA-84TP-NG-B5UP-N M-B5UP-N M-5TP-RI ERA-B5TP-NG-4UP-RI M-4UP-RI ERA-4TP-RIG-B4TP-N M-5UP-TI ERA-B4TP-NG-B5TP-N M-B4TP-N ERA-B5TP-NG-4TP-RI M-B5TP-N ERA-B5TP-RIMaterial and workmanship; Intec/Permaglas guarantees to the original buildingowner that it will repair or replace, at its sole discretion, the Intec/Permaglasroofing system or portion thereof as is necessary to correct leaks caused by (1)manufacturing defects, (2) deterioration as a result of ordinary wear and tearfrom exposure to the elements, (3) splits, fissures or tears not caused bystructural or roof deck movement or failure, or (4) workmanship in installing theroofing membranes and base flashings. The components of Intec/Permaglasroofing system covered by the guarantee are the membrane, flashing, insulationand accessories specifically identified in the guarantee; all other components ofthe building, including any roofing components, are excluded. (See SpecialFeatures/Conditions.)5. Length of coverage 10 years 5, 10, 15, or 20 years (length of coverage depends uponnumber and type of plies as well as climate zone)6. Nature of remedy Imper Italia will provide replacement material at its ownexpense.7. Monetary limitations Imper Italia's total liability shall not exceed the original cost ofits membrane roofing material.8. Notification requirements Written notification to the approved roofing contractor andRol-Ply, Inc. (representatives of Imper Italia) within 30 days ofdiscovery of any leaks in Imper Italia <strong>Roofing</strong> Membrane.9. Exclusive or additional remedy Owner's sole and exclusive remedy; excludes all otherwarranties; excludes UCC warranties.Intec/Permaglas shall repair or replace the membrane andbase flashings or any portion thereof to make theIntec/Permaglas roofing system watertight, unless the roofingcontractor is obligated to do so for a claim brought during thefirst two years. (See Special Features/ Conditions.)Intec/Permaglas' maximum liability shall not exceed in theaggregate over the life of the guarantee more than the dollaramount inserted on an individual basis.Written notice to Intec/Permaglas within 15 days of discoveryof the leak which is the basis of a claim, even if the discoveryis within the first two yearsRemedy in guarantee shall be the sole and exclusive remedy available tothe owner. Guarantee is expressly in lieu of any other guarantees orwarranties, and any other obligations or liability on the part of Intec,whether any claim is based upon strict liability, negligence, breach ofwarranty or any other theory or cause of action; excludes UCCwarranties.Diamond 105, Seal-A-Plate, FM Bar, Ballasted, Bonded Plate,135 Totally Adhered, ReinforcedMaterial and workmanship; IDS warrants that it will repairimproper workmanship of any installed IDS product in theoriginal IDS roofing system. The IDS roofing system is limitedto and includes only the IDS EPDM vulcanized roofingmembrane, flashing, adhesives, and other IDS accessoriespurchased from IDS or its distributors, utilized in theinstallation and installed according to IDS installationinstructions. (See Special Features/Conditions.)10 years workmanship, 15 years materialsIDS will repair improper workmanship of any installed productin the original IDS roof system. The owner's sole remedy islimited to replacement of the de-fective IDS product; themethod of repair is sole determination of IDS. The owner'ssole remedies and IDS' liabilities and obligations shall belimited to re-placement of the defective IDS product by repairor substitution of new aterial.IDS' obligation to remedy defects shall not exceed the originalcost of IDS materials as charged by IDS.Written notification within 30 days of discovery of any defect inthe IDS roofing system by certified mail, return receipt requested,to IDS at 5110 Angola Road, Toledo, OH 43615The warranty replaces and excludes all other warranties; remedy statedin warranty is the sole and exclusive remedy; excludes UCC warranties.The warranty states: ΑThe building owners sole remedy is to file a claimagainst our product liability or completed operations for any underlyingmaterials or any other damages whatsoever. The products must beproven defective scientifically by certified laboratories.≅10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicability12. Specific exclusions fromcoverage (see item 12 inIntroduction)Rol-Ply, Inc.'s determinationIntec/Permaglas' determination (See SpecialFeatures/Conditions.)1, 2, 3, 4, 5, 7, 9, 10, 11, 22 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 20, 22. Warrantyalso excludes damages to the roof system more than 15 daysafter discovery of a leak unless Intec/Permaglas was notifiedwithin 15 days13. Wind coverage/exclusions Warranty does not mention wind conditions specifically. Intec/Permaglas indicates that there is no coverage fordamage caused by wind. Guarantee excludes windstorms,hurricanes, and tornadoes.IDS= determination1, 2, 3, 4, 5, 6, 7, 10, 11, 12 (including those items contained in IDS <strong>Roofing</strong>Care and Maintenance Guide), 13, 16, 17, 18, 19, 24. (The warranty alsoexcludes damage or loss caused by pests, insect infestation, ice storm or anywindstorm or occurrence covered by fire and windstorm insurance, includingsubrogation claims.)The warranty excludes windstorms, wind gusts/gales, hurricanes, andtornadoes. IDS indicates that the warranty covers wind speeds up to BeaufortScale 8, which starts at 39 mph. The plate bond system is not wind uplift rated.(See Special Features/Conditions.)14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, J, N B, C, E, G, H, I, L, M, R (See Special Features/Conditions.) C, M, N, S15. Cost to obtain None 5 years: $6.00/square; 10 years: $7.50/square; 12 years:$8.00/square; 15 years: $10.00/square; 20 years:$15.00/square$8.00/square620

16. Minimum charge None 5 years: $600; 10 years: $750; 12 years: $800; 15 years:$1,000; 20 years: $1,50010 years: $500, 15 years: $60017. Ineligible structure or buildinguse18. Pre-construction notice andapproval requirementsCold-storage buildings; roofs with polystyrene insulation, uninsulatedsteel decks; areas subjected to oil caustic chemicalsor roofs that retain water more than 24 hoursImper Italia indicates that the contractor is required to givenotice and obtain approval prior to commencing installation.Any building where harmful emissions or chemicals maydamage the roof and parking areasThe contractor shall submit notice to Intec/Permaglas ten daysprior to commencement of guaranteed job.The warranty states that IDS shall have no obligation if building isused for noncommercial purposes, such as residential, personal,family, or household purposes.Prior to the job commencing, the contractor submits an applicationto install IDS roofing systems. Upon completion, the contractorsubmits notice of completion and request for warranty19. Approved, authorized, or licensedrequirementsYes20. Job inspection policy Imper Italia inspects job site prior to and after application priorto issuance of guarantee; there may be an inspection charge.21. Contractor’s post-installationobligationYesIntec/Permaglas technical roof inspectors make on-siteinspections at job completion and prior to the issuance of aguarantee and at two years after the issuance of theguarantee; no charge.Contractor is responsible for any repairs that may be necessary as aresult of improper installation as to which complaints are made orinspections reveal to be necessary, within a two year period aftercompletion of the roof. Contractor agrees to assist U.S. Intec ininspections so long as inspections and subsequent repairs are madewithin 3 months after the 2 nd anniversary of the completion of the roof.IDS field technical department will make on-site inspectionsprior to and during application upon request. IDS makesinspection after completion prior to issuance of warranty, aswell as two years after issuance of warranty; no charge. If asecond inspection is required, inspection charge is $350/dayplus $0.26 per mile.The contractor is obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextensionNoImper Italia S.p.A. manufactures product; product sold inUnited States by its representative, Rol-Ply, Inc.No; Intec/Permaglas indicates that it does not carry insurancecovering its guarantee obligations.Intec/Permaglas manufactures and sells product.No; IDS indicates that it does not carry insurance covering itswarranty obligations.IDS manufactures and sells the product.No renewal provision No renewal provisons. No renewal provision.25. Assignability No restrictions stated. The guarantee is assignable to another owner for the remaining term only if thefollowing conditions are met: (1) the request is sent by certified mail toIntec/Permaglas, Attn: Contractor Services Department, 1361 Alps Rd., Wayne,NJ 07470 within 30 days after ownership transfer; (2) the membrane isinspected by Intec/Permaglas and any required repairs are completed at theowner's expense; (3) the proposed assignment is approved in writing by anauthorized Intec/Permaglas Contractor Services Manager; and (4) anassignment fee of $750 is paid to Intec/Permaglas. The guarantee is nototherwise transferable or assignable, directly or indirectly.The warranty is not transferable26. Special features/conditionsIn the event of a leak, Rol-Ply, Inc. will make inspection anddetermine what repairs are necessary and will advise ImperItalia, the owner, and the contractor in writing. Owner shall beliable for expense of any repair, removal or replacement oftraffic surfaces or other appurtenances built over the roofnecessary to restore the roof to a watertight condition and anyrepair to parts of the building other than the roof.The guarantee excludes workmanship coverage from Intec/Permaglas for firsttwo years. (See Item #21 above.)In the event Intec/Permaglas determines that complaint is excluded by theguarantee, owner shall be responsible for reimbursing Intec/Permaglas for thereasonable costs associated with the inspection. Owner's failure to reimburseIntec/Permaglas within 30 days of receipt of invoice shall terminateIntec/Permaglas' obligations. If the inspection occurs during the first two years,the reimbursable expenses are the joint obligation of the owner and the roofingcontractor.Intec/Permaglas may make inspection during the period between 23 and 25months after validation of guarantee. An inspection report detailing anyapplication related inadequacies or leaks will be provided to owner and roofingcontractor. Owner and roofing contractor agree that all such applicationinadequacies or leaks will be repaired within 30 days, weather permitting.If Intec/Permaglas discovers conditions in or adjacent to the roofing systemthat are not covered by the guarantee but which affect the watertight integrity ofthe roof system, the owner agrees to completely remedy the condition within 30days. Owner shall send an inspection report to Intec/Permaglas detailing suchrepair within 15 days of their completion. Intec/Permaglas representatives maybe retained to furnish all necessary inspection services at owner's cost.In the event the owner discovers leaks or other conditions which create anemergency condition, the owner may make essential temporary repairs asnecessary at the owner's expense.Owner shall perform routine inspections and maintenance. Regularinspections should be made at least once a year and as soon as possible afterextreme weather conditions such as heavy winds, rain or hail, excessive snowor ice build-up and/or earthquakes. Any existing or potential problemsdiscovered during an inspection must be reported to Intec Permaglasimmediately.No representative, employee or agen of Intec/Permaglas or any other personhas the authority to assume for Intec/Permaglas any additional or other liabilityor responsibility. Intec/Permaglas shall not be responsible for any change oramendment to the Intec/Permaglas roof specifications unless approved inwriting by an authorized Intec/Permaglas Technical Services Manager.Absent reasonable access to the roof, owner shall be responsible for alladditional expenses incurred by Intec/Permaglas. Failure of owner to reimburseIntec/Permaglas promptly for such additional expenses shall void theguarantee.Although the warranty states that it covers workmanship of any installed IDSproduct, the warranty also states: ΑThe Owner's roofing applicator isresponsible for workmanship for the first two (2) years of this warranty or anydefective workmanship known or unknown for the life of this warranty. Thebuyer agrees to indemnify and save IDS harmless against any claims arisingout of the sale or installation of defective workmanship.≅ In the limitationssection, the warranty states: ΑIDS is under no obligation to issue a warranty onany job until an affidavit is signed by the building owner and the roofingcontractor stating that the job was done with IDS material, specifications, anddetails. IDS warranty is clearly limited to the repair of IDS material if defectiveand the repair of the workmanship if it is made defective by the defectivematerial.≅ Thus, the warranty is ambiguous as to whether it covers bothmaterial and workmanship of contractor.All legal actions against IDS must be noticed and venued in Toledo, LucasCounty, Ohio and Ohio law shall apply.The warranty states: ΑThe building owners sole remedies on the aboveconditions and limitation of recovery on any and all claims will be filed againstIDS insurance carrier. Any dispute which cannot be settled within the terms andconditions of this warranty limits the building owners recovery to the realms ofour insurance policy and/or our suppliers, and/or his agents.≅If the courts find the warranty legally binding or non-binding between IDS andthe owner, then the UCC statute of limitations applies in lieu of the warranty inits entirety.The warranty states: ΑAll parties must except [sic] industry standards, state ofthe art technology, FM (Factory Mutual), UL (Underwriters Laboratories), andASTM testing (as published by them) as the standard that is excepted [sic] bythe industry and all parties with no deviations as tested by IDS.≅The official weather report is the nearest airport or the national weather bureau.If there are damaging winds recorded at the airport and wind damage is foundon the building, the owner's insurance will be responsible for the repair of theroofing system. If the owner's insurance denies coverage for the wind damage,the owner will hold IDS harmless, along with the other terms, conditions, andlimitations of warranty. Note: Ground speed winds must be calculated andmultiplied by three in order to determine the effect the wind has on a system.If a defect is not caused by workmanship, IDS will advise of the type and/orextent of repairs required to be made at owner's expense by a qualifiedapplicator; all investigation and repair costs are the owner's responsibility.27. Executed by owner No No Yes; warranty must be signed, dated, and returned to IDS atits office in Toledo, Ohio not later than 30 days after receipt.621

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entityInternational Diamond 105 Non-Penetrating<strong>Roofing</strong> Systems, Inc. (IDS)Johns Manville International, Inc. (JM)Johns Manville International, Inc. (JM)2. Title, original publication date,and identifying symbol, if anyΑLimited Ten Year Membrane Only Warranty (Prorated)≅;Revised 12/95"Gold Shield <strong>Roofing</strong> System Guarantee;" September 1997;JM-645-2 (9/97), RS-7082 11-97ΑUltraGard <strong>Roofing</strong> System Guarantee;≅ April 1998; RS-8048(4/98)3. Product, specification, or systemcoveredDiamond 105, Seal-A-Plate, FM Bar, Ballasted, Bonded Plate,135 Totally Adhered, ReinforcedBUR Specifications: 4GIS, 4GIG, 5GNG, 5GLG, 5GIC,withGlasPly Premier Felts, installed over two layers of FescoboardEPDM: Ballasted, Mechanically Attached, Fullyl AdheredPVC: Mechanically Attached, Fully Adhered4. Scope of coverage Material only. IDS warrants that the IDS EPDM vulcanizedroofing membrane will not deteriorate to the point of causingleaks through the membrane due to normal weathering.Warranty applies only to the IDS EPDM vulcanized roofingmembrane utilized in the installation and installed according toIDS' installation instructions and does not apply to labor,materials, or any other item.Material and workmanship; JM guarantees that it will pay for thematerials and labor required to promptly repair the roofing systemto return it to a watertight condition if leaks occur due to ordinarywear and tear or deficiencies in any or all of the componentmaterials of the <strong>Roofing</strong> System or workmanship deficiencies in theapplication of the <strong>Roofing</strong> System. <strong>Roofing</strong> System componentsare JM membrane, flashing, insulation, and accessories; all othercomponents of building are excluded.Material and workmanship; JM guarantees that it will pay for thematerials and labor required to promptly repair the roofing system toreturn it to a watertight condition if leaks occur due to ordinary wear andtear or deficiencies in any or all of the component materials of the<strong>Roofing</strong> System or workmanship deficiencies in the application of the<strong>Roofing</strong> System. <strong>Roofing</strong> System components are JM membrane,flashing, insulation, and accessories; all other components of building areexcluded.5. Length of coverage 10 or 15 years 20 years for new construction or tear-off 5, 10 or 15 years6. Nature of remedy IDS will, at its option, either repair the membrane or issue a proratedcredit against the purchase of a new roofing membrane from IDS. Theowner's sole remedies and IDS' liabilities and obligations shall be limitedto the replacement of defective IDS EPDM vulcanized roofing membraneby repair or substitution of new material.JM will take prompt appropriate action to return the <strong>Roofing</strong> System to awatertight condition. Exclusive responsibility and liability of JM underguarantee is to make repairs that may be necessary to maintain the<strong>Roofing</strong> System in a water tight condition.JM will take prompt appropriate action to return the <strong>Roofing</strong> System to awatertight condition. Exclusive responsibility and liability of JM underguarantee is to make repairs that may be necessary to maintain the<strong>Roofing</strong> System in a water tight condition.7. Monetary limitations IDS' obligation to remedy defects shall not exceed the originalcost of IDS materials as charged by IDS.8. Notification requirements9. Exclusive or additional remedy10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions fromcoverage (see item 12 inIntroduction)Written notification within 30 days of discovery of any defect in the IDSroofing system by certified mail, return receipt requested, to IDS at 5110Angola Road, Toledo, OH 43615The warranty replaces and excludes all other warranties; remedy statedin warranty is the sole and exclusive remedy; excludes UCC warranties.The warranty states: ΑThe building owners sole remedy is to file a claimagainst our product liability or completed operations for any underlyingmaterials or any other damages whatsoever. The products must beproven defective scientifically by certified laboratories.≅Guarantee includes space for JM's maximum monetary obligation to beinserted. (JM indicates that for these specifications, JM's maximumliability is$100 per sq.; minimum coverage is $10,000.)Written notification to JM's Guarantee Services Department, 10100 W.Ute Ave., Littleton, CO 80127, immediately upon discovery of leak and inno event later than 30 days after discovery of leak.Guarantee states that JM and its affiliates shall not be liablefor any damages which are based upon negligence, breach ofwarranty, strict liability, or any other theory of liability otherthan exclusive liability set forth in guarantee; excludes UCCwarranties.No No NoGuarantee includes space for JM's maximum monetary obligation to beinserted. (JM indicates that for these specifications, JM's maximumliability is the original installed cost of the roof system.)Written notification to JM's Guarantee Services Department, 10100 W.Ute Ave., Littleton, CO 80127, immediately upon discovery of leak andin no event later than 30 days after discovery of leak.Guarantee states that JM and its affiliates shall not be liable for anydamages which are based upon negligence, breach of warranty,strict liability, or any other theory of liability other than exclusiveliability set forth in guarantee; excludes UCC warranties.Neutral (no provision). Neutral; JM arranges inspection Neutral; JM arranges inspection1, 2, 3, 4, 5, 6, 7, 10, 11, 12 (including those items containedin IDS <strong>Roofing</strong> Care and Maintenance Guide), 13, 16, 17, 18,19, 24. (Warranty also excludes damage or loss caused bypests, insect infestation, ice storm, or any windstorm oroccurrence covered by fire and windstorm insurance, includingsubrogation claims.)1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18 1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 1813. Wind coverage/exclusions The warranty excludes windstorms, wind gusts/gales,hurricanes, and tornadoes. IDS indicates that warranty coverswind speeds up to Beaufort Scale 8, which starts at 39 mph.The plate bond system is not wind uplift rated.JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.JM indicates that guarantee covers roof damage resulting fromwind speeds up to 54 mph. Warranty excludes wind speeds inexcess of a strong gale which the Baurfort Scale defines aswinds between 47-54 mph.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, M, N, S C, F, M (See Special Features/Conditions.) C, F, M (See Special Features/Conditions.)15. Cost to obtainNone$12.00/squarePVC systems: 5 years $ 4,00/square10 years $ 7.00/square15 years $10.00/square16. Minimum charge None $1,200EPDM Systems: 5 years $2.00/square10 years $4.00/square15 years $6.00/squareWhen liquid adhesive is used, there is an additional$1.00/square warranty charge.622

17. Ineligible structure or buildinguseThe warranty states that IDS shall have no obligation ifbuilding is used for noncommercial purposes, such asresidential, personal, family, or household purposes.Cold-storage buildings, private residences, storage silos,heated tanksCold-storage buildings, private residences, storage silos,heated tanks18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsPrior to the job commencing, the contractor submits anapplication to install IDS roofing systems. Upon completion,the contractor submits notice of completion and request forwarranty.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Yes Yes Yes20. Job inspection policy IDS field technical department will make on-site inspectionsprior to and during application upon request. IDS makesinspection after completion prior to issuance of warranty, aswell as two years after issuance of warranty; no charge. If asecond inspection is required, inspection charge is $350/dayplus $0.26 per mile.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs to workmanshipdeficiencies for two years.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; IDS indicates that it does not carry insurance covering itswarranty obligations.No; JM indicates that it does not carry insurance covering itswarranty obligations.No; JM indicates that it does not carry insurance covering itswarranty obligations.23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextension25. Assignability The warranty is not transferable.26. Special features/conditions27. Executed by ownerIDS manufactures and sells the product. JM manufactures and sells product. JM manufactures and sells product.No renewal provision No renewal provision No renewal provisionThe warranty states: ΑIDS is under no obligation to issue a warranty onany job until an affidavit is signed by the building owner and the roofingcontractor stating that the job was done with IDS material, specifications,and details. IDS warranty is clearly limited to the repair of IDS material ifdefective and the repair of the workmanship if it is made defective by thedefective material.≅ Thus, the warranty is ambiguous as to whether itcovers both material and workmanship of contractor.All legal actions against IDS must be noticed and venued in Toledo,Lucas County, Ohio and Ohio law shall apply.The warranty states: ΑThe building owners sole remedies on the aboveconditions and limitation of recovery on any and all claims will be filedagainst IDS insurance carrier. Any dispute which cannot be settledwithin the terms and conditions of this warranty limits the building ownersrecovery to the realms of our insurance policy and/or our suppliers,and/or his agents.≅If the courts find the warranty legally binding or non-binding between IDSand the owner, then the UCC statute of limitations applies in lieu of thewarranty in its entirety.The warranty states: ΑAll parties must except [sic] industry standards,state of the art technology, FM (Factory Mutual), UL (UnderwritersLaboratories), and ASTM testing (as published by them) as the standardthat is excepted [sic] by the industry and all parties with no deviations astested by IDS.≅The official weather report is the nearest airport or the national weatherbureau. If there are damaging winds recorded at the airport and winddamage is found on the building, the owner's insurance will beresponsible for the repair of the roofing system. If the owner's insurancedenies coverage for the wind damage, the owner will hold IDS harmless,along with the other terms, conditions, and limitations of warranty. Note:Ground speed winds must be calculated and multiplied by three in orderto determine the effect the wind has on a system.If a defect is not caused by workmanship, IDS will advise of the typeand/or extent of repairs required to be made at owner's expense by aqualified applicator; all investigation and repair costs are the owner'sresponsibility.Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.To be eligible for this 20-year guarantee, a four-ply specificationwith GlasPly Premier Felts must be installed over two layers ofeither JM Fesco or insulation; the project must be either newconstruction or tear-off.In order to continue guarantee coverage, owner must implement amaintenance program prescribed by JM on the reverse side of theguarantee, including (a) maintaining a file showing all inspectionsand repairs; (b) inspecting roof at least semiannually; (c) removingany debris; (d) cleaning gutters, downspouts, drains, andsurrounding areas; (e) repairing any damaged, loose, or poorlysealed metal flashing and valleys by an approved contractor; (f)repairing damaged masonry, poorly mounted counter-flashing,loose caulking, bad mortar joints, and any loose stone or tile copingthat abut the roof; (g) correcting materials at edges of the roof thathave been lifted by wind by an approved contractor; (h) examiningroof top equipment to determine if they move excessively or leak; (i)checking building exterior for settlement or movement; and (j)recoating any cracked, flaking, or blistered areas of protectivecoatings.In the event of an emergency condition that requires immediaterepair to avoid substantial damage to building or its contents, JMwill reimburse the owner for repair expenses for essentialtemporary repairs that would have been JM's responsibility.In the event JM pays for repairs that are required due to acts oromissions of others, JM shall be subrogated to all rights of recoveryof the building owner to the extent of the amount of the repairs. Noone is authorized to change, alter, or modify the provisions of theguarantee other than the Manager, Marketing and TechnicalServices or authorized delegate. All terms and conditions are to beconstrued under internal law of Colorado.Yes; Guarantee must be signed, dated, and returned to JM at its office inLittleton, CO.Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.In order to continue guarantee coverage, owner must implement amaintenance program prescribed by JM on the reverse side ofguarantee, including: (a) maintaining a file showing all inspections andrepairs; (b) inspecting roof at least semiannually; (c) removing anydebris; (d) cleaning gutters, downspouts, drains, and surrounding areas;(e) repairing any damaged, loose or poorly sealed materials by anapproved contractor; (f) repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and any loose stone ortile coping that abut the roof; (g) correcting materials at edges of the roofthat have been lifted by wind by an approved contractor; (h) examiningroof top equipment to determine if they move excessively or leak; (i)checking building exterior for settlement or movement; and (j) recoatingany cracked, flaking, or blistered areas of protective coatings.In the event of an emergency condition that requires immediate repair toavoid substantial damage to building or its contents, JM will reimbursethe owner for repair expenses for essential temporary repairs that wouldhave been JM's responsibility.In the event JM pays for repairs, which are required due to acts oromissions of others, JM shall be subrogated to all rights of recovery ofthe building owner to the extent of the amount of the repairs. No one isauthorized to change, alter, or modify the provisions of the guaranteeother than the Manager, Marketing and Technical Services or authorizeddelegate.Parties agree that any controversy or claims relating to the Guaranteeshall be settled exclusively by arbitration in accordance with theConstruction Industry Aribtration Rules of the American Arbitration<strong>Association</strong> at the Denver, Colorado office. Alll terms and conditions areto be construed under interal laws of Colorado.Because JM doesw not practice engineering or architecture, neither theissuance of the guarantee nor any review of building=s construction orinspection of roof plans by JM representatives shall constitute anywarranty by JM or in any way constitute an extension of the terms andconditoins of the Guarantee.Yes; Guarantee must be signed, deated, and returned to JM at its officein Littleton, CO.623

624

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Johns Manville International, Inc. (JM) Johns Manville International, Inc. (JM) Johns Manville International, Inc. (JM)2. Title, original publication date,and identifying symbol, if any"Gold Shield <strong>Roofing</strong> System Guarantee"; September 1997;JM-645-2 (9/97) RS-7082 11/97"Gold Shield <strong>Roofing</strong> System Guarantee"; September 1997;JM-645-2 (9/97), RS-7082 11/97"Gold Shield <strong>Roofing</strong> System Guarantee"; June 1997; JM-645-2 (6/97), RS-7082 11-973. Product, specification, or systemcoveredBUR Specifications: 4GIS, 4GIG, 3GIS, 3GIG, 4GIC, 4GNC, 4GNS, withuse of GlasPly Premier Felts; DynaKap Modified Bitumen Specifications:2CID, 2CIG, 2CND, 2CNG, 3CID, 3CND (See SpecialFeatures/Conditions)BUR Specifications: 4GIS, 4GIG, 5GIC, 4GNS, 4GNG, with use ofGlasPly Premier Felts; DynaKap Modified Bitumen Specifications: 3CID,3CIG, 3FID, (See Special Features/Conditions), APP Modified BitumenSpecification:s: 3CIN-W, 3PIN-W.BUR Specifications: 4GIS, 3GIS, 4GIG, 3GIG, 4GNS, 3GNS, 4GNG,3GNG, 4GLG, 3GLG, 4GIC, 4GNC, 3GIC, 3GNC, 4GIG-CT, 4GNG-CT,3GIG-CT, 3GNG-CT. Modified Bitumen Specifications: 2GID, 2GND,2CID, 2CND, 3CID, 3CND, 3CIG, 3CNG, 2PIN-W, 2PIS-W, 2PFN-W,3PIN-W4. Scope of coverage Material and workmanship; JM guarantees that it will pay for thematerials and labor required to promptly repair the roofing system toreturn it to a watertight condition if leaks occur due to ordinary wear andtear or deficiencies in any or all of the component materials of the<strong>Roofing</strong> System or workmanship deficiencies in the application of the<strong>Roofing</strong> System. <strong>Roofing</strong> System components are JM membrane,flashing, insulation, and accessories; all other components of building areexcluded.Material and workmanship; JM guarantees that it will pay for thematerials and labor required to promptly repair the roofing system toreturn it to a watertight condition if leaks occur due to ordinary wear andtear or deficiencies in any or all of the component materials of the<strong>Roofing</strong> System or workmanship deficiencies in the application of the<strong>Roofing</strong> System. <strong>Roofing</strong> System components are JM membrane,flashing, insulation, and accessories; all other components of building areexcluded.Material and workmanship; JM guarantees that it will pay for thematerials and labor required to promptly repair the roofing system toreturn it to a watertight condition if leaks occur due to ordinary wear andtear or deficiencies in any or all of the component materials of the<strong>Roofing</strong> System or workmanship deficiencies in the application of the<strong>Roofing</strong> System. <strong>Roofing</strong> System components are JM membrane,flashing, insulation, and accessories; all other components of building areexcluded.5. Length of coverage 5 years for re-roofing; 10 years for new construction or tear-off. 20 years for new construction or tear-off. 5 or 10 years6. Nature of remedyJM will take prompt appropriate action to return the <strong>Roofing</strong> System to awatertight condition. Exclusive responsibility and liability of JM underguarantee is to make repairs that may be necessary to maintain the<strong>Roofing</strong> System in a water tight condition.JM will take prompt appropriate action to return the <strong>Roofing</strong> System to awatertight condition. Exclusive responsibility and liability of JM underguarantee is to make repairs that may be necessary to maintain the<strong>Roofing</strong> System in a water tight condition.JM will take prompt appropriate action to return the <strong>Roofing</strong> System to awatertight condition. Exclusive responsibility and liability of JM underguarantee is to make repairs that may be necessary to maintain the<strong>Roofing</strong> System in a water tight condition.7. Monetary limitations Guarantee includes space for JM's maximum monetary obligation to beinserted. (JM indicates that for these specifications, JM's maximumliability is the original installed cost of the roof system.)Guarantee includes space for JM's maximum monetary obligation to beinserted. (JM indicates that for these specifications, JM's maximumliability is the original installed cost of the roof system.)Guarantee includes space for JM's maximum monetary obligation to beinserted. (JM indicates that for these specifications, JM's maximumliability is the original installed cost of the roof system.)8. Notification requirements Written notification to JM's Guarantee Services Department, 10100 W.Ute A e., Littleton, CO 80127 immediately upon discovery of leak and inno event later than 30 days after discovery of leak.Written notification to JM's Guarantee Services Department, 10100 W.Ute Ave., Littleton, CO 80127, immediately upon discovery of leak and inno event later than 30 days after discovery of leak.Written notification to JM's Guarantee Services Department, 10100 W.Ute Ave., Littleton, CO 80127, immediately upon discovery of leak and inno event later than 30 days after discovery of leak.9. Exclusive or additional remedy Guarantee states that JM and its affiliates shall not be liable for anydamages which are based upon negligence, breach of warranty, strictliability, or any other theory of liability other than exclusive liability setforth in guarantee; excludes UCC warranties.Guarantee states that JM and its affiliates shall not be liable for anydamages which are based upon negligence, breach of warranty, strictliability, or any other theory of liability other than exclusive liability setforth in guarantee; excludes UCC warranties.Guarantee states that JM and its affiliates shall not be liable for anydamages which are based upon negligence, breach of warranty, strictliability, or any other theory of liability other than exclusive liability setforth in guarantee; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoNeutral; JM arranges inspection Neutral; JM arranges inspection Neutral; JM arranges inspection12. Specific exclusions fromcoverage (see item 12 inIntroduction)1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18 1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18 1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 1813. Wind coverage/exclusions JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.14. Specific conditions to make C, F, M (See Special Features/Conditions.) C, F, M (See Special Features/Conditions.) C, F, M (See Special Features/Conditions.)warranty ineffective or null andvoid (see item 14 in Introduction)15. Cost to obtain $8.50/square $17.00/square 5 years: $5.00/square; 10 years: $6.00/square16. Minimum charge $850 $1,700 5 years: $500; 10 years: $60017. Ineligible structure or buildinguseCold-storage buildings, private residences, storage silos,heated tanksCold-storage buildings, private residences, storage silos,heated tanksCold-storage buildings, private residences, storage silos,heated tanks18. Pre-construction notice andapproval requirementsContractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.19. Approved, authorized, or licensedrequirements20. Job inspection policyYes Yes YesInspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.625

21. Contractor’s post-installationobligationContractor is obligated to make repairs to workmanshipdeficiencies for two years.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextensionNo; JM indicates that it does not carry insurance covering itswarranty obligations.No; JM indicates that it does not carry insurance covering itswarranty obligations.No; JM indicates that it does not carry insurance covering itswarranty obligations.JM manufactures and sells product. JM manufactures and sells product. JM manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.26. Special features/conditionsSpecifications 4GIC, 4GNC, 4GNS and RGNG are eligible forthis guarantee in JM=s designated Region 3 only.In order to continue guarantee coverage, owner mustimplement a maintenance program prescribed by JM on thereverse side of the guarantee, including (a) maintaining a fileshowing all inspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairing anydamaged, loose, or poorly sealed metal flashing and valleysby an approved contractor; (f) repairing damaged masonry,poorly mounted counter-flashing, loose caulking, bad mortarjoints, and any loose stone or tile coping that abut the roof; (g)correcting materials at edges of the roof that have been liftedby wind by an approved contractor; (h) examining roof topequipment to determine if they move excessively or leak; (i)checking building exterior for settlement or movement; and (j)recoating any cracked, flaking, or blistered areas of protectivecoatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would have been JM'sresponsibility.In the event JM pays for repairs that are required due to actsor omissions of others, JM shall be subrogated to all rights ofrecovery of the building owner to the extent of the amount ofthe repairs. No one is authorized to change, alter, or modifythe provisions of the guarantee other than the Manager,Marketing and Technical Services or authorized delegate.Parties agree that any controversy or claims relating toGuarantee shall be settled exclusively by arbitrtion inaccordance with the construction Industry Arbitration Rules ofthe American Arbitration <strong>Association</strong> at the Denver, Coloradooffice. All terms and conditions are to be construed underinternal law of Colorado.Because JM does not practice engineering or architecture,neither the issuance of the guarantee nor any review ofbuilding=s construction or inspection of roof plans by JMrepresentaties shall constitute any warranty by JM or in anyway constitute an extension of the terms and conditions of theGuarantee.27. Executed by owner Yes; Guarantee must be signed, dated, and returned to JM atits office in Littleton, CO.To be eligible for this 20 year guarantee, a four-plyspecification with GlasPly minimum Premier Felts must beinstalled over two layers of JM insulation with the top layerbeing JM Fesco Board. In order to continue guaranteecoverage, owner must implement a maintenance programprescribed by JM on the reverseside of guarantee, including:(a) maintaining a file showing all inspections and repairs; (b)inspecting roof at least semi-annually; (c) removing any debris;(d) cleaning gutters, downspouts, drains, and surroundingareas; (e) repairing any damaged, loose or poorly sealedmaterials by an approved contractor; (f) repairing damagedmasonry, poorly mounted counterflashing, loose caulking, badmortar joints, and any loose stone or tile coping that abut theroof; (g) correcting materials at edges of the roof that havebeen lifted by wind by an approved contractor; (h) examiningroof top equipment to determine if they move excessively orleak; (i) checking building exterior for settlement or movement;and (j) recoating any cracked, flaking, or blistered areas ofprotective coatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would have been JM'sresponsibility.In the event JM pays for repairs, which are required due toacts or omissions of others, JM shall be subrogated to allrights of recovery of the building owner to the extent of theamount of the repairs. No one is authorized to change, alter, ormodify the provisions of the guarantee other than theManager, Marketing and Technical Services or authorizeddelegate.Parties agree that any controversy or claims relating toGuarantee shall be settled exclusively by arbitration inaccordance with the Construction Industry Arbitration Rules ofthe American Arbitration <strong>Association</strong> at the Denver, Coloradooffice. All terms and conditions are to be construed underinternal law of Colorado.Because JM does not practice engineering or architecture,neither the issuance of the guarantee nor any review ofbuildlng=s construction or inspection of roof plans by JMrepresentatives shall constitute any warranty byJM or in anyway constitute an extension of the terms and conditions of theGuarantee.Yes; Guaranteee must be signed, dated, and returned to JM atits office inLittleton, CO.All listed specifications are eligible for either the 5- or 10-yearguarantee.In order to continue guarantee coverage, owner mustimplement a maintenance program prescribed by JM on thereverse side of guarantee, including: (a) maintaining a fileshowing all inspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairing anydamaged, loose, or poorly sealed metal flashing and valleysby an approved contractor; (f) repairing damaged masonry,poorly mounted counter-flashing, loose caulking, bad mortarjoints, and any loose stone or tile coping that abut the roof; (g)correcting materials at edges of the roof that have been liftedby wind by an approved contractor; (h) examining roof topequipment to determine if they move excessively or leak; (i)checking building exterior for settlement or movement; and (j)recoating any cracked, flaking, or blistered areas of protectivecoatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would have been JM'sresponsibility.In the event JM pays for repairs, which are required due toacts or omissions of others, JM shall be subrogated to allrights of recovery of the building owner to the extent of theamount of the repairs. No one is authorized to change, alter,or modify the provisions of the guarantee other than theManager, Marketing and Technical Services or authorizeddelegate.Parties agree that any controversy or claims relating toGuarantee shall be settled exclusively by arbitration inaccordance with the Construction Industry Arbitration Rules ofthe American Arbitration <strong>Association</strong> at the Denver, Coloradooffice. All terms and conditions are to be construed underinternal law of Colorado.Because JM does not practice engineering or architecture,neither the issuance of the guarantee nor any review ofbuildlng=s construction or inspection of roof plans by JMrepresentatives shall constitute any warranty byJM or in anyway constitute an extension of the terms and conditions of theGuarantee.Yes: Guarantee must be signed, dated, and returned to JM atits office in Littleton, CO.626

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Johns Manville International, Inc. (JM) Johns Manville International, Inc. (JM) Johns Manville International, Inc. (JM)2. Title, original publication date,and identifying symbol, if any3. Product, specification, or systemcovered4. Scope of coverage"Gold Shield <strong>Roofing</strong> System Guarantee"; September 1997;JM-645-2 (9/97) RS-7082 11-97BUR Specifications: 4GIS, 4GIG, 5GIC, 5GNS, 5GNG, withuse of GlasPly Premier Felts and one layer of Fescoboard;DynaKap Modified Bitumen Specifications: 3CID, 3CIG,3CND, 3CNG (See Special Features/Conditions).Material and workmanship; JM guarantees that it will pay forthe materials and labor required to promptly repair the roofingsystem to return it to a watertight condition if leaks occur dueto ordinary wear and tear or deficiencies in any or all of thecomponent materials of the <strong>Roofing</strong> System or workmanshipdeficiencies in the application of the <strong>Roofing</strong> System. <strong>Roofing</strong>System components are JM membrane, flashing, insulation,and accessories; all other components of building areexcluded."Gold Shield <strong>Roofing</strong> System Guarantee"; September; JM-645-2 (9/97), RS-7082 11-97APP Modified Bitumen Products: APPEX Classic FR Premium,Classic FR, Classic M, Classic S, 5S, 4S, 4M, 4MFR, 4.5M,200, Bicor, Tricor, Tricor MFR, when applied over one or twopliesMaterial and workmanship; JM guarantees that it will pay forthe materials and labor required to promptly repair the roofingsystem to return it to a watertight condition if leaks occur dueto ordinary wear and tear or deficiencies in any or all of thecomponent materials of the <strong>Roofing</strong> System or workmanshipdeficiencies in the application of the <strong>Roofing</strong> System. <strong>Roofing</strong>System components are JM membrane, flashing, insulation,and accessories; all other components of building areexcluded.5. Length of coverage 15 years for new construction or tear-off. 5 years: any APPEX modified bitumen membrane productinstalled over one ply of felt or any approved substrate; 10years: any APPEX modified bitumen membrane productinstalled over one ply or base sheet over an approvedsubstrate; 12 years: any APPEX modified bitumen membraneproduct installed over one base ply and an approvedsubstrate.6. Nature of remedy JM will take prompt appropriate action to return the <strong>Roofing</strong>System to a watertight condition. Exclusive responsibility andliability of JM under guarantee is to make repairs that may benecessary to maintain the <strong>Roofing</strong> System in a water tightcondition.7. Monetary limitations8. Notification requirements9. Exclusive or additional remedy10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityGuarantee includes space for JM's maximum monetaryobligation to be inserted. (JM indicates that for thesespecifications, JM's maximum liability is the original installedcost of the roof system.)Written notification to JM's Guarantee Services Department,10100 W. Ute Ave., Littleton, CO 80127, immediately upondiscovery of leak and in no event later than 30 days afterdiscovery of leak.Guarantee states that JM and its affiliates shall not be liablefor any damages which are based upon negligence, breach ofwarranty, strict liability, or any other theory of liability otherthan exclusive liability set forth in guarantee; excludes UCCwarranties.JM will take prompt appropriate action to return the <strong>Roofing</strong>System to a watertight condition. Exclusive responsibility andliability of JM under guarantee is to make repairs that may benecessary to maintain the <strong>Roofing</strong> System in a water tightcondition.Guarantee includes space for JM's maximum monetaryobligation to be inserted. (JM indicates that for thesespecifications, JM's maximum liability is the original installedcost of the roof system.)Written notification to JM's Guarantee Services Department,10100 W. Ute Ave., Littleton, CO 80127, immediately upondiscovery of leak and in no event later than 30 days afterdiscovery of leak.Guarantee states that JM and its affiliates shall not be liablefor any damages which are based upon negligence, breach ofwarranty, strict liability, or any other theory of liability otherthan exclusive liability set forth in guarantee; excludes UCCwarranties.No No No"Gold Shield <strong>Roofing</strong> System Guarantee"; September 1997;JM-645-2 (9/97), RS-7002 11-97APP Modified Bitumen Products: Bicor or Tricor when installedover two APPEX base sheets, utilizing three plies of material.Material and workmanship; JM guarantees that it will pay forthe materials and labor required to promptly repair the roofingsystem to return it to a watertight condition if leaks occur dueto ordinary wear and tear or deficiencies in any or all of thecomponent materials of the <strong>Roofing</strong> System or workmanshipdeficiencies in the application of the <strong>Roofing</strong> System. <strong>Roofing</strong>System components are JM membrane, flashing, insulation,and accessories; all other components of building areexcluded.20 yearsJM will take prompt appropriate action to return the <strong>Roofing</strong>System to a watertight condition. Exclusive responsibility andliability of JM under guarantee is to make repairs that may benecessary to maintain the <strong>Roofing</strong> System in a water tightcondition.Guarantee includes space for JM's maximum monetaryobligation to be inserted. (JM indicates that for thesespecifications, JM's maximum liability is the original installedcost of the roof system.)Written notification to JM's Guarantee Services Department,10100 W. Ute Ave., Littleton, CO 80127, immediately upondiscovery of leak and in no event later than 30 days afterdiscovery of leak.Guarantee states that JM and its affiliates shall not be liablefor any damages which are based upon negligence, breach ofwarranty, strict liability, or any other theory of liability otherthan exclusive liability set forth in guarantee; excludes UCCwarranties.Neutral; JM arranges inspection Neutral; JM arranges inspection Neutral; JM arranges inspection12. Specific exclusions fromcoverage (see item 12 inIntroduction)13. Wind coverage/exclusions JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18 1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18 1, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 15, 18JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.JM indicates that guarantee covers roof damage resulting fromwind speeds up to 63 mph.C, F, M (See Special Features/Conditions.) C, F, M (See Special Features/Conditions.) C, F, M (See Special Features/Conditions.)15. Cost to obtain $12.50/square 5 yrs: $5.00/sq; 10 yrs: $6.00/sq; 12 yrs: $8.50/sq $17.00/square16. Minimum charge $1,250 5 years: $500; 10 years: $600; 12 years: $850 $1,700627

17. Ineligible structure or buildinguseCold-storage buildings, private residences, storage silos,heated tanksCold-storage buildings, private residences, storage silos,heated tanksCold-storage buildings, private residences, storage silos,heated tanks18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirements20. Job inspection policy21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextensionContractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Yes Yes YesInspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; JM indicates that it does not carry insurance covering itswarranty obligations.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; JM indicates that it does not carry insurance covering itswarranty obligations.Contractor is required to submit a guarantee application forapproval 14 days prior to start of construction.Inspections made by local JM field representatives prior,during, and after application as well as two years afterissuance of guarantee; no charge.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; JM indicates that it does not carry insurance covering itswarranty obligations.JM manufactures and sells product. JM manufactures and sells product. JM manufactures and sells product.No renewal provision25. Assignability Guarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.26. Special features/conditionsSpecifications 5GIC, 5GNC, 5GNS and 5GNG are eligible forthis guarantee in JM's designated Region 3 only.JM's 15-year guarantee is limited to four-ply specificationsinstalled over one layer of FesCore, used in new constructionor tear-off projects.In order to continue guarantee coverage, owner mustimplement a maintenance program prescribed by JM on thereverse side of guarantee, including: (a) maintaining a fileshowing all inspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairing anydamaged, loose or poorly sealed materials by an approvedcontractor; (f) repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (g) correctingmaterials at edges of the roof that have been lifted by wind byan approved contractor; (h) examining roof top equipment todetermine if they move excessively or leak; (i) checkingbuilding exterior for settlement or movement; and (j) recoatingany cracked, flaking, or blistered areas of protective coatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would have been JM'sresponsibility.In the event JM pays for repairs, which are required due toacts or omissions of others, JM shall be subrogated to allrights of recovery of the building owner to the extent of theamount of the repairs. No one is authorized to change, alter, ormodify the provisions of the guarantee other than theManager, Marketing and Technical Services or authorizeddelegate. All terms and conditions are to be construed underinternal laws of Colorado.No renewal provisionGuarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.In order to continue guarantee coverage, owner mustimplement a maintenance program prescribed by JM on thereverse side of guarantee, including: (a) maintaining a fileshowing all inspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairing anydamaged, loose or poorly sealed materials by an approvedcontractor; (f) repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (g) correctingmaterials at edges of the roof that have been lifted by wind byan approved contractor; (h) examining roof top equipment todetermine if they move excessively or leak; (i) checkingbuilding exterior for settlement or movement; and (j) recoatingany cracked, flaking, or blistered areas of protective coatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would havebeen JM's responsibility.In the event JM pays for repairs, which are required due toacts or omissions of others, JM shall be subrogated to allrights of recovery of the building owner to the extent of theamount of the repairs. No one is authorized to change, alter, ormodify the provisions of the guarantee other than theManager, Marketing and Technical Services or authorizeddelegate. All terms and conditions are to be construed underinternal laws of Colorado.27. Executed by owner No No NoNo renewal provisionGuarantee will be transferred by JM, in its sole discretion, onlyafter receiving satisfactory information and payment of atransfer fee, which must be delivered to JM as soon aspractical, but no later than 30 days after the date of buildingownership transfer.In order to continue guarantee coverage, owner mustimplement a maintenance program prescribed by JM on thereverse side of guarantee, including: (a) maintaining a fileshowing all inspections and repairs; (b) inspecting roof at leastsemiannually; (c) removing any debris; (d) cleaning gutters,downspouts, drains, and surrounding areas; (e) repairing anydamaged, loose or poorly sealed materials by an approvedcontractor; (f) repairing damaged masonry, poorly mountedcounterflashing, loose caulking, bad mortar joints, and anyloose stone or tile coping that abut the roof; (g) correctingmaterials at edges of the roof that have been lifted by wind byan approved contractor; (h) examining roof top equipment todetermine if they move excessively or leak; (i) checkingbuilding exterior for settlement or movement; and (j) recoatingany cracked, flaking, or blistered areas of protective coatings.In the event of an emergency condition that requiresimmediate repair to avoid substantial damage to building or itscontents, JM will reimburse the owner for repair expenses foressential temporary repairs that would have been JM'sresponsibility.In the event JM pays for repairs, which are required due toacts or omissions of others, JM shall be subrogated to allrights of recovery of the building owner to the extent of theamount of the repairs. No one is authorized to change, alter, ormodify the provisions of the guarantee other than theManager, Marketing and Technical Services or authorizeddelegate. All terms and conditions are to be construed underinternal laws of Colorado.628

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity JPS Elastomerics Corp., JPS Elastomerics Corp., JPS Elastomerics Corp.,2. Title, original publication date,and identifying symbol, if anyΑHi-Tuff Plus Total Systems Limited Warranty for CommercialBuilding - NDL≅; January, 1995; RSD-FM-13AΑLimited Material Warranty for Commercial Building≅; January1995, RSD-FM-12ΑLimited Warranty for Commercial Building - NDL≅; January,1995, RSD-FM-113. Product, specification, or systemcoveredHi-Tuff <strong>Roofing</strong> System Total Roof System includesmembrane, Hi-Tuff edge metal system, insulation, adhesives,fasteners, insulation plates, term bars, and other materialsprovided by JPS.Hi-Tuff <strong>Roofing</strong> membrane wearing surfaceHi-Tuff <strong>Roofing</strong> System4. Scope of coverageMaterial and workmanship; JPS warrants to repair leaks in theHi-Tuff roofing system caused by material or workmanship ofthe JPS authorized roofing applicator. JPS does not warrantthe thermal resistance of roof insulation.Material only; JPS warrants that the Hi-Tuff roofing membranewearing surface will withstand the effects of the weather due tonormal wear and tear of the elements when installed and usedin strict compliance with JPS specifications. Warranty doesnot include the cost of installation of replacement material orremoval of defective material.Material and workmanship; JPS warrants to repair leaks in theHi-Tuff roofing system caused by defects in JPS roofingmaterial or workmanship of the JPS authorized roofingapplicator. Warranty does not include insulation.5. Length of coverage 10 or 15 years 5 or 10 years 10 years6. Nature of remedyJPS will repair leaks in the roofing system using methodsdetermined to be suitable at JPS's discretion.If the wearing surface fails due to the effects of weather andnormal wear and tear of the elements and the material isinstalled and used in strict accordance with JPS specifications,JPS will be liable for the cost of the material at the time ofclaim, prorated for service to date of claim. JPS will furnishthe owner Hi-Tuff roofing membrane to replace the affectedarea.JPS will repair leaks in the roofing system using methodsdetermined to be suitable at JPS' discretion.7. Monetary limitations None stated. JPS' liability limited to the cost of the material at the time ofclaim, prorated for service to date of claim.None stated.8. Notification requirements9. Exclusive or additional remedy10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityWritten notification of leaks must be delivered to JPS WarrantyService Department at Holyoke, MA 01040-2800, within 30days of discovery.Warranty and remedies are exclusive and in lieu of any otherremedy or warranty whether written, oral, implied or statutory;excludes UCC warranties.Written notification to JPS Warranty Services Department,Holyoke, MA 01040-2800, within 30 days of the discovery ofany wearing surface failure in the membraneWarranty and remedies are exclusive and in lieu of any otherremedy or warranty whether written, oral, implied, or statutory;excludes UCC warranties.No No NoJPS' determination; JPS' sole judgment whether specificexclusions and conditions that make warranty null and voidoccur.JPS' determination; JPS' judgment whether specific exclusionsand conditions that make warranty null and void occur.Written notification of leaks must be delivered to JPS WarrantyServices Department, Holyoke, MA 01040-2800, within 30days of discovery.Warranty and remedies are exclusive and in lieu of any otherremedy or warranty whether written, oral, implied or statutory;excludes UCC warranties.JPS' determination; JPS' sole judgment whether specificexclusions and conditions that make warranty null and voidoccur.12. Specific exclusions fromcoverage (see item 12 inIntroduction)1, 3, 5, 7, 17. Warranty states that specific Condition M alsomakes the warranty inapplicable.1, 2, 3, 16, 23 1, 3, 5, 7, 17. Warranty states that specific Condition M alsomakes the warranty inapplicable.13. Wind coverage/exclusions14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)15. Cost to obtainWarranty excludes winds of peak gust speed of ___ mphmeasured 10 meters above the ground, hurricanes, andtornadoes.Warranty excludes gale-force winds.B, C, F, G, H, I B, C, F, G, I B, C, F, G, H, I10 years: $8.00 or $11.00/square; 15 years: $9.00 and$12.00/square5 years: $150; 10 years: $300 10 years: $6.00/squareWarranty excludes winds of peak gust speed of ___ mphmeasured 10 meters above the ground, hurricanes, andtornadoes.16. Minimum charge17. Ineligible structure or buildinguse10 years: $600; 15 years: $675 5 years: $150; 10 years: $300 10 years: $450Residential buildings Residential buildings Residential buildings

18. Pre-construction notice andapproval requirementsContractor submits request to JPS for approval of warrantyform, along with diagram and details.NoneContractor submits request to JPS for approval of warrantyform, along with diagram and details.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy JPS technical representative makes on-site inspection afterapplication prior to issuance of warranty; no charge.JPS technical representative makes on-site inspection afterapplication prior to issuance of warranty; no charge.JPS technical representative makes on-site inspection afterapplication prior to issuance of warranty; no charge.21. Contractor’s post-installationobligationContractor is normally obligated to make repairs to all leaks,any defects, and workmanship deficiencies for two years.Contractor is normally obligated to make repairs to all leaks,any defects, and workmanship deficiencies for two years.Contractor is normally obligated to make repairs to all leaks,any defects, and workmanship deficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells products24. Conditions for renewal orextension25. AssignabilityNo No NoJPS manufactures and sells the product. JPS manufactures and sells the product. JPS manufactures and sells the product.No renewal provision No renewal provision No renewal provisionWarranty is transferable; consult JPS for conditions oftransferability. Conditions are noted in JPS maintenanceinstructions.Warranty is transferable; consult JPS for conditions oftransferability. Conditions are noted in JPS maintenanceinstructions.Warranty is transferable; consult JPS for conditions oftransferability. Conditions are noted in JPS maintenanceinstructions.26. Special features/conditionsAny controversy or claim arising out of or relating to warrantyshall be settled by arbitration in accordance with theconstruction industry rules of the American Arbitration<strong>Association</strong> at the Boston, Mass. regional office, and judgmentupon the award rendered by the arbitrators may be entered inany court having jurisdiction thereof. No representative of JPShas authority to make any representations or promises, exceptas stated in warranty.Any controversy or claim arising out of or relating to warrantyshall be settled by arbitration in accordance with theconstruction industry rules of the American Arbitration<strong>Association</strong> at the Boston, Mass. regional office, and judgmentupon the award rendered by the arbitrators may be entered inany court having jurisdiction thereof. No representative of JPShas authority to make any representations or promises, exceptas stated in warranty.Any controversy or claim arising out of or relating to warrantyshall be settled by arbitration in accordance with theconstruction industry rules of the American Arbitration<strong>Association</strong> at the Boston, Mass. regional office, and judgmentupon the award rendered by the arbitrators may be entered inany court having jurisdiction thereof. No representative of JPShas authority to make any representations or promises, exceptas stated in warranty.27. Executed by ownerYes Yes Yes630

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Koppers Industries, Inc. Koppers Industries, Inc. Koppers Industries, Inc.2. Title, original publication date,and identifying symbol, if any3. Product, specification, or systemcoveredΑKoppers Built-Up <strong>Roofing</strong> Classic Warranty≅; CRD-04/95 C ΑKoppers Built-Up <strong>Roofing</strong> Standard Warranty≅; CRD-04/95 B ΑModified Bitumen Roof Membrane Warranty≅; CRD-04/95 DBuilt-Up roofing specifications: 200 Series, 400 Series, 500Series. All Classic Warranties require two layers of insulationsupplied and/or approved by Koppers.Built-Up roofing specifications: 200 Series and 400 SeriesModified bitumen specifications4. Scope of coverage Material and workmanship; Koppers agrees to provide roofingrepairs to correct all roof water leaks that may occur fromordinary wear and tear of the elements, defects in built-uproofing, flashing, or insulation supplied by Koppers, andworkmanship of the original roofing contractor in installingKoppers built-up roofing, flashing, and insulation. A roof waterleak is defined as water passing through the roofing or flashingmembrane and into the interior of the building. Warranty doesnot cover correction of any condition other than roof waterleaks, including blisters, clogged drains, ridging, bitumendrippage, or migration.5. Length of coverage 5 or 10 years for BUR specifications Series 200, 400, and 500;15 or 20 years for BUR Specification Series 200, 400, and 5006. Nature of remedyKoppers will undertake repairs so long as the repair is consideredΑprudent≅ (i.e., Koppers considers that the cost of the repair is lessthan the Αremaining value≅ of the roof on the date the repair isrequired. ΑRemaining value" is the total cost of roof installation,reduced by 5 percent for each year or part of a year after theeffective date, with no deduction for the cost of any previouswarranty repair). If Koppers believes repair is not prudent, paymentof remaining value will be owner's sole and exclusive remedy andshall relieve Koppers of all further liability under this warranty.7. Monetary limitations Koppers is not liable to pay for a repair that Koppers believeswill cost more than the total cost of the roof installation (BURmembrane, flashing, and insulation) reduced by 5 percent foreach year or part thereof.Material and workmanship; Koppers agrees to provide roofingrepairs to correct all roof water leaks that may occur fromordinary wear and tear of the elements, defects in built-uproofing or flashing materials supplied by Koppers, andworkmanship of the original roofing contractor in installingKoppers built-up roofing and flashing materials. A roof waterleak is defined as water passing through the roofing or flashingmembrane and into the interior of the building. Warranty doesnot cover correction of any condition other than roof waterleaks, including blisters, clogged drains, ridging, bitumendrippage, or migration.5 or 10 years for BUR specification Series 200, 400; 15 or 20years for BUR specification Series 200, 400. The onlywarranty available for a new roof over an existing roof isKoppers 5-year standard warranty; this requires priorinspection/approval and at least one layer of Koppersapproved insulation over the existing roof, and excludescertain specifications.Koppers will schedule a roof inspection and arrange for anyrepairs that are covered by warranty.Koppers' liability is a minimum of $1,000 and is limited basedupon the length of the warranty:Length of Warranty Liability Limit5 years $100/square10 years $50/square15 years $75/square20 years $100/squareMaterial and workmanship; Koppers agrees to provide roofingrepairs to correct all roof water leaks that may occur fromdefects in modified bitumen material supplied by Koppers andworkmanship of the original Koppers eligible roofing contractorin installing Koppers' modified bitumen products after the firsttwo years of warranty. Warranty does not cover correction ofany condition other than roof water leaks, including ridging orslippage.5, 10, or 12 years. The only warranty available for a new roofover an existing roof is Koppers 5-year warranty; this requiresprior inspection/approval and at least one layer of Koppersapprovedinsulation over the existing roof.Koppers will schedule a roof inspection and arrange for any repairsthat are covered by warranty.Koppers' liability is a minimum of $1,000 and is limited basedupon the length of the warranty, as follows:Length of Warranty Liability Limit5 years $100/square10 years $50/square12 years $100/square8. Notification requirements Call Koppers at 800/468-9626 within 72 hours of discovery ofleak and provide written notice within 30 days to KoppersIndustries, Inc. 436 Seventh Avenue, Pittsburgh, PA 15219,Attention: <strong>Roofing</strong> Warranty Department.9. Exclusive or additional remedy Remedy provided by warranty is sole and exclusive remedy atlaw or equity for defects in material supplied by Koppers andworkmanship of the contractor. Koppers not liable forconsequential, incidental, or other damages under any theoryof law; excludes UCC warranties.10. Inclusion of consequentialdamagesCall Koppers at 800/468-9629 within 72 hours of discovery ofleak and provide written notice within 30 days to KoppersIndustries, Inc. 436 Seventh Avenue, Pittsburgh, PA 15219,Attention: <strong>Roofing</strong> Warranty Department.Remedy provided by warranty is sole and exclusive remedy atlaw or equity for defects in material supplied by Koppers andworkmanship of the contractor. Koppers not liable forconsequential, incidental, or other damages under any theoryof law; excludes UCC warranties.No No NoCall Koppers at 800/468-9629 within 72 hours of discovery ofleak and provide written notice within 30 days to KoppersIndustries, Inc. 436 Seventh Avenue, Pittsburgh, PA 15219,Attention: <strong>Roofing</strong> Warranty Department.Remedy provided by warranty is sole and exclusive remedy atlaw or equity for defects in material supplied by Koppers andworkmanship of the contractor. Koppers is not liable forconsequential, incidental, or other damages under any theoryof law; excludes UCC warranties.11. Determination of warrantyapplicability12. Specific exclusions fromcoverage (see item 12 inIntroduction)Koppers' determination Koppers' determination Koppers' determination1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 16, 17, 22, 23 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 16, 17, 18, 22, 231, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 15, 16, 17, 18, 22, 23631

13. Wind coverage/exclusions Warranty excludes wind damage, hurricanes, and tornadoes.Koppers indicates that there is no coverage for damagecaused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)15. Cost to obtainThe warranty excludes wind damage, hurricanes andtornadoes. Koppers indicates that there is no coverage fordamage caused by wind.H, M H, M H, M5 yrs: $ 8.00/sq; 10 yrs: $10.00/sq;15 yrs: $12.00/sq; 20 yrs: $15.00/sq5 yrs: $4.00/sq; 10 yrs: $6.00/sq;15 yrs: $7.00/sq; 20 yrs: $8.00/sqThe warranty excludes wind damage, hurricanes, andtornadoes. Koppers indicates that there is no coverage fordamage caused by wind.5 yrs: $4.00/sq; 10 yrs: $5.00/sq; 12 yrs: $6.00/sq16. Minimum charge 5 yrs: $700; 10 yrs: $800; 15 yrs: $900; 20 yrs: $1,000 5 yrs: $350; 10 yrs: $550; 15 yrs: $600; 20 yrs: $650 5 yrs: $350; 10 yrs: $550; 12 yrs: $60017. Ineligible structure or buildinguse18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsCooler/freezer buildings, private residences Cooler/freezer buildings, private residences Cold-storage or freezer/cooler unitsContractor telephones application to Koppers 14 days prior tojob start. If project is approved, contractor is sent applicationfor warranty.The contractor telephones application to Koppers 14 daysprior to job start. If project is approved, contractor is sentapplication for warranty.Yes Yes Yes20. Job inspection policy Koppers technical service personnel or designatedrepresentative will make on-site inspections prior to and duringapplication periodically or as requested. Koppers makesinspection after completion prior to issuance of warranty, aswell as two years after issuance of warranty; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufacturesand/or sells productsContractor obligated to make repairs to workmanshipdeficiencies for two years.Koppers technical service personnel or designatedrepresentative will make on-site inspections prior to and duringapplication periodically or as requested. Koppers makesinspection after completion prior to issuance of warranty, aswell as two years after issuance of warranty; no charge.Contractor obligated to make repairs to workmanshipdeficiencies for two years.The contractor telephones application to Koppers 14 daysprior to job start. If project is approved, contractor is sentapplication for warranty.Koppers technical service personnel or designatedrepresentative makes inspections prior to, and duringapplication. A final inspection, prior to warranty issuance, isrequired. A two-year inspection is required. No charge forinspections.Contractor obligated to make repairs to workmanshipdeficiencies for two years.No; Koppers indicates that it is self-insured. No; Koppers indicates that it is self-insured. No; Koppers indicates that it is self-insured.Koppers manufactures and sells product. Koppers manufactures and sells product. Koppers sells product only.24. Conditions for renewal orextensionNo renewal provision No renewal provision No renewal provision25. Assignability Warranty states that original named owner is covered and notany tenant, purchaser, or successor without prior written noticeto and approval from Koppers.Warranty states that original named owner is covered and notany tenant, purchaser, or successor without prior written noticeto and approval from Koppers.Warranty states that original named owner is covered and notany tenant, purchaser, or successor without prior written noticeto and approval from Koppers.26. Special features/conditionsWorkmanship coverage is contingent upon contractor'sagreement to install Koppers' products in accordance withapplicable specifications and details. Koppers does not certifythat the work is actually free from defect. A roof sketch mustbe supplied to Koppers identifying the exact location of alladditions, alterations, or repairs.Workmanship coverage is contingent upon contractor'sagreement to install Koppers' products in accordance withapplicable specifications and details. Koppers does not certifythat the work is actually free from defect. A roof sketch mustbe supplied to Koppers identifying exact location of alladditions, alterations, or repairs.Workmanship coverage is contingent upon contractor'sagreement to install Koppers' modified bitumen products inaccordance with applicable specifications and details.Koppers does not certify that the work is actually free fromdefect. A roof sketch must be supplied to Koppers identifyingexact location of all additions, alterations, or repairs.This warranty will be governed by the laws of thecommonwealth of Pennsylvania. Any action for breach ofwarranty must be commenced within one year after suchbreach occurs or is discovered.This warranty will be governed by the laws of thecommonwealth of Pennsylvania. Any action for breach ofwarranty must be commenced within one year after suchbreach occurs or is discovered.This warranty will be governed by the laws of thecommonwealth of Pennsylvania. Any action or breach of thisagreement must be commenced within one year after suchbreach occurs or is discovered.If Koppers' investigation of a reported problem reveals theproblem to be outside the scope of warranty, investigation andrepair costs shall be paid by owner. Annual roof inspectionsare the responsibility of the building owner. When necessary,roof maintenance must be performed. A complete recoating ofthe flashing systems, using a Koppers aluminum roof coating,is required every five years on flashing specifications 168, 172,and 180, and as needed on 174 and 182.If Koppers' investigation of a reported problem reveals theproblem to be outside the scope of warranty, investigation andrepair costs shall be paid by owner. Annual roof inspectionsare the responsibility of the building owner. When necessary,roof maintenance must be performed. A complete recoating ofthe flashing system, using a Koppers aluminum roof coating, isrequired every five years on flashing specifications 168, 172,and 180, and as needed on 174 and 182.If Koppers' investigation of a reported problem reveals theproblem to be outside the scope of warranty, investigation andrepair costs shall be paid by owner. Annual roof inspectionsare the responsibility of the building owner. When necessary,roof maintenance must be performed. A complete recoating ofthe flashing system, using a Koppers aluminum roof coating, isrequired every five years on flashing specifications 168, 172,and 180, and as needed on 174 and 182.27. Executed by owner No No No632

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Koppers Industries, Inc. MBTechnology Corporation MBTechnology Corporation2. Title, original publication date, andidentifying symbol, if anyΑKoppers IRMA Roof Warranty with Styrofoam Brand Insulation≅;June 1991; CRD-05/91 [Specimen copy has designationCRD-05/91SP.]Α10-Year Limited Material Warranty≅; 1990MBTechnology ΑRoof Membrane Guarantee (Form MBT-108)__ Year Limited≅; April 1990; Form MBT-108A 4/903. Product, specification, or systemcoveredIRMA Built-up <strong>Roofing</strong> specifications: 263, 264, 273, 274, 463,464, 473, 474All published FG90GWH, FG160CWH, SC75GWH,FGFT160CWH, MF160WAL systems. Cap sheet substitutesallowed for nonΒfire-rated systems as outlined in currentmanual.All published FG90GWH, FG160CWH, SC75GWH,FGFT160CWH, MF160WAL systems. Cap sheet substitutesallowed for nonΒfire-rated systems as outlined in currentmanual.4. Scope of coverageMaterial and workmanship; warranty covers roof water leaksresulting from ordinary wear and tear of the elements; defects inKoppers built-up roofing and flashing or Styrofoam Brand <strong>Roofing</strong>Material Insulation manufactured by Dow Chemical Company;retention of at least 90 percent of Styrofoam Brand Insulation'spublished thermal resistance; Styrofoam Brand Insulation blow-offin roof level wind gusts of up to 70 miles per hour; andworkmanship of the original roofing contractor in installing Koppersbuilt-up roofing, flashing, and Styrofoam Brand Insulation.Material only; MBT warrants that the MBT roofing membraneand base flashings will withstand ordinary wear and tear by theelements and will be free of manufacturing defects that affectthe ability of the products to maintain the roof in a watertightcondition when installed in accordance with current MBTspecifications.MBT guarantees that the roof membrane shall remain in awatertight condition or MBT shall repair roof membrane at itsown expense.5. Length of coverage10 years: specifications 263 and 463 on lightweight insulatingconcrete or gypsum, 273 and 473 on precast concrete or steel; 15years: specifications 263 and 463 on wood plank, 264 and 464 onlightweight insulating concrete or gypsum; 20 years: specifications264 and 464 on wood plank, 274 and 474 on poured or precastconcrete or steel, 273 and 473 on poured concrete; 20-yearspecifications are eligible for 15- and 10-year warranties; 15-yearspecifications are eligible for 10-year warranties.10 years 10, 12, 15, or 20 years (length and type of coverage dependsupon specification used).6. Nature of remedy Koppers will undertake repairs as long as the repair isΑpracticable,≅ i.e., the cost of the repair is less than the"remaining value" of the roof on the date the repair is required.ΑRemaining value≅ is the total cost of roof installation reducedby 5 percent for each year or part of a year after the effectivedate with no deduction for the cost of any previous warrantyrepair. If Koppers believes repair is not practicable, payment ofremaining value will be owner's sole and exclusive remedy.7. Monetary limitations Koppers is not liable to pay for a repair that Koppers believeswill cost more than the total cost of the roof installation (BURmembrane, flashing, and Styrofoam) reduced by 5 percent foreach year or part thereof.If manufacturing defects cause the membrane to lose itswatertight integrity, MBT, at its sole discretion and option, willeither refund to the owner a portion of the original purchasecost of the membrane or replace a portion of the membrane.MBT's liability limited to refunding to owner a portion of themembrane's original purchase cost, or replacing a portion ofthe membrane according to a pro-rated schedule, reduced 10percent per year, ranging from 100 percent in years 1 and 2 to10 percent in year 10.Warranty states, Α[r]oofing contractors applying MBT materialsguarantee all workmanship and assume all liability to repair orreplace, at his sole cost and expense, any and all materialscausing leaks wherein the materials were improperly installedfrom the date of warranty issue or until the repairs orreplacement of the MBT materials are proven to provide for areasonable two-year period or [sic] watertight conditions.≅Thereafter, MBT guarantees to repair or replace all defectivematerials to provide for a watertight condition of the roofingsystem. (See Special Features/Conditions.)MBT's liability for repair and/or replacement of defective MBTmembrane shall be restricted to the amount of the original costof MBT material.8. Notification requirementsCall Koppers at 1-800-468-9629 within 72 hours of discovery ofleak or insulation failure and provide written notice byregistered mail to Koppers Industries, Inc., 436 SeventhAvenue, Pittsburgh, PA 15219, Attention: <strong>Roofing</strong> CustomerService Department.9. Exclusive or additional remedy Remedy provided in warranty is sole and exclusive remedy atlaw or in equity for defects in material supplied by Koppers orDow and workmanship of the contractor. Koppers not liable forconsequential, incidental, or other damages under any theoryof law; excludes UCC warranties.10. Inclusion of consequentialdamagesAll repairs must be authorized in writing in advance bymanager, technical services, MBTechnology, 188 S. TeilmanSt., Fresno, CA 93706-9956.Warranty and remedy provided are exclusive and in lieu of allother obligations, liabilities, or express warranties, excludesUCC warranties. Specifications, descriptive information,recommendations, or test results provided by MBT do notconstitute warranties. In no event shall MBT be liable to ownerin tort, for negligence, strict liability, or otherwise for any loss ordamage resulting from any material defect.No No NoWritten notification by certified mail to MBT's office at 188 S.Teilman, Fresno, CA 93706, within 10 days of the date ownerdiscovers material defect.Warranty and remedy provided are exclusive and in lieu of all otherobligations, liabilities or express warranties; excludes UCCwarranties. No warranties extending beyond warranty document,specifications, descriptive information, recommendations or testresults provided by MBT do not constitute warranties. In no eventshall MBT be liable to owner in tort, for negligence, strict liability, orotherwise for any loss or damage resulting from any materialdefect.632

11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)13. Wind coverage/exclusions14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Koppers determines whether repair is practical. Thermalresistance of insulation tested according to ASTM C518-85.(See Special Features/Conditions.)1, 2, 3, 4, 5, 7, 8, 9, 10, 12, 15, 16, 17, 18, 22, 23The warranty covers roof damage resulting from wind speedsup to 70 miles per hour.B (except emergency repairs), GMBT's determination1, 2, 3, 4, 6, 7, 9, 10, 12, 13, 15, 16, 19, 20, 22, 24, 25. Warrantyalso specifically excludes losses, damages, or leaks resulting fromany animal or insect, willful misrepresentation or fraud by owner,and exposure to ionized radiation or contamination by radioactivityfrom nuclear fuel or nuclear waste.Warranty excludes windstorms and hurricanes. [MBT indicatesthat there is no coverage for damage caused by wind.]LMBT's sole and exclusive determination as to whether leaks inMBT material will be rectified by repair or replacement.1, 2, 3, 4, 6, 7, 9, 10, 11, 12, 13, 15, 16, 17, 19, 20, 22, 24, 25.Warranty also specifically excludes losses, damages, or leaksresulting from any animal or insect, willful misrepresentation orfraud by owner, and exposure to ionized radiation or contaminationby radioactivity from nuclear fuel or nuclear waste.Warranty excludes windstorms and hurricanes. [MBT indicatesthat there is no coverage for damage caused by wind.]A, C, G, H, I, M, N, R. Warranty not applicable to losses, damages orleaks resulting from work performed by contractor or pursuant tocontracts that were not approved in writing in advance from MBT.Warranty also shall be void if MBT materials are disposed in a mannerthat prevents MBT from prior inspection to establish causes of failure.15. Cost to obtain 10 yrs: $9.00/sq; 15 yrs: $10.50/sq; 20 yrs: $13.00/sqe None 10 or 12 yrs: $6.00/sq; 15 yrs: $8.50/sq; 20 yrs: $13.50/sq16. Minimum charge 10 yrs: $800; 15 yrs: $900; 20 yrs: $1,000 None 10 or 12 yrs: $600; 15 yrs: $850; 20 yrs: $1,35017. Ineligible structure or building use Cooler/freezer buildings, private residences Coolers, cold-storage, or freezer buildings Cold-storage; coolers; freezer buildings; high-humiditystructures, like swimming pools, laundry facilities; restaurants,storage silos, and heated tank structures must be reviewedbefore acceptability.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirements20. Job inspection policy21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextension25. AssignabilityThe contractor telephones application to Koppers 14 days priorto job start. If project is approved, contractor is sent applicationfor warranty.None required.Yes No YesKoppers technical service personnel or designatedrepresentative may make on-site inspections prior to andduring application. Inspection of insulation installation and afinal inspection prior to warranty issuance and a two-yearinspection are required; no charge.Contractor is obligated to make repairs to workman-shipdeficiencies for two years.No; Koppers indicates that it does not carry insurance coveringits warranty obligations.No on-site inspectionsNone; material-only warrantyNo; MBT indicates that it carries $100 million general liabilityinsurance covering its warranty obligations.Fourteen days prior to start of construction, the contractor mustcomplete and submit Form MBT-103 Warranted SystemProposal and Survey for technical review before acceptance ofroof system application.MBT field technical staff makes on-site inspections prior, atleast two times during application, and after application, as wellas two years after issuance of warranty; no chargeContractor obligated to make repairs to workmanshipdeficiencies and all leaks for two years.Koppers manufactures and sells product. MBT manufactures and sells product. MBT manufactures and sells the product.No renewal provision No renewal provision Renewal at MBT's discretionWarranty states that original named owner is covered and notany tenant, purchaser, or successor without prior written noticeto and approval from Koppers.Not assignable; warranty accrues to original owner named inwarranty and shall not accrue to the benefit of or be assignableto any tenant, successor, purchaser, or assignee of originalowner.NoNot assignable; warranty accrues to original owner named inthe warranty and shall not accrue to the benefit of, or beassignable to any tenant, successor, purchaser, or assignee oforiginal owner.26. Special features/conditions Koppers does not certify that the work is actually free fromdefect. If Koppers' investigation of a reported problem revealsthe problem to be outside the scopeof the warranty, investigation and repair costs shall be paid bythe owner. "Thermal resistance" of Styrofoam Brand insulationshall be tested, at owner's expense, according to ASTMC518-85. Should testing prove insulation to have lost greaterthan 10 percent of thermal resistance, owner will bereimbursed for test-ing cost and insulation replacement.Warranty will be governed by the laws of Pennsylvania.Any action or breach of this agreement must be commencedwithin one year after such breach occurs or is discovered.<strong>Roofing</strong> contractor must complete warranty registration andmail promptly along with proof of purchase to MBT offices tovalidate warranty.27. Executed by owner No Yes633Upon receipt of claim, MBT technical department will make on-siteinspection. If leak condition is found to be from causes other thanmanufacturing defects or workmanship, MBT charges $250/dayplus expenses for inspection; otherwise, no charge. MBT shall beentitled to replace or repair at MBT's sole and exclusive discretionany component of MBT materials as deemed necessary, whetheror not a claim has been made. The cost of such repair orreplacement shall be borne by MBT unless repair or replacementresults from causes excluded from warranty coverage, in whichcase the owner shall reimburse MBT for such costs. Refusal ofowner to allow MBT to inspect repairs or replace materials or paycosts for repairs not covered by warranty terminates the warrantyand relieves MBT from any further liability.

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity MBTechnology Corporation Monsey Bakor Monsey Bakor2. Title, original publication date, andidentifying symbol, if any12-Year Limited Material Warranty; 1990 <strong>Roofing</strong> Systems & Waterproofing Limited Warranty; 09/96 Limited <strong>Roofing</strong> & Waterproofing Product Warranty; 09/963. Product, specification, or systemcoveredAll published FG90GWH, FG160CWH, SC75GWH,FGFT160CWH, MF160WAL systems. Cap sheet substitutesallowed for nonfire-rated systems as outlined in currentmanual.Modified Plus Modified Bitumen roofing products and systemsModified Plus Modified Bitumen roofing products and systems4. Scope of coverageMaterial only; MBT warrants that the MBT roofing membraneand base flashings will withstand ordinary wear and tear by theelements and will be free of manufacturing defects that affectthe ability of the products to maintain the roof in a watertightcon-dition when installed in accordance with currentMBT specifications.Material only; Monsey Bakor warrants that it will, at its option,repair or replace free of charge any Monsey Bakor productsthat are found to be materially defective. The warranty coversonly material defects in Monsey Bakor products that causewater leakage.Material only; Monsey Bakor warrants that the Monsey Bakorproduct, when prepared and applied in accordance withspecifications and directions and used under normal serviceconditions, will not break down or disintegrate.5. Length of coverage 12 years 12 years 12 years6. Nature of remedyIf manufacturing defects cause the membrane to lose itswatertight integrity, MBT, at its sole discretion and option, willeither refund to the owner a portion of the original purchasecost of the membrane or replace a portion of the membrane.Monsey Bakor's liability limited to replacement of materials andthe cost of labor necessary to maintain or restore the surface towhich the Monsey Bakor product is applied in a watertightcondition.Monsey Bakor shall refund to the owner all or part of theoriginal cost of the product based upon a prorating schedule.7. Monetary limitationsMBT's liability limited to refunding to owner a portion of themembrane's original purchase cost, or replacing a portion ofthe membrane, including all materials and labor, according to aprorated schedule, reduced 10 percent per year, ranging from100 percent in years 1 and 2 to 10 percent in year 12.8. Notification requirements All repairs must be authorized in writing in advance bymanager, technical services, MBTechnology, 188 S. TeilmanSt., Fresno, CA 93706-9956.None stated.Written notice of any material defect of the Monsey Bakorproducts within 30 days of the defect to Monsey Bakor, ColdStream Road, Kimberton, PA 19442.Refund to the owner shall be determined by multiplying theoriginal cost of the product times (by) the unexpired fraction ofthe warranty period.Written notice of any failure of the Monsey Bakor productwithin 30 days of failure to Monsey Bakor, Cold Stream Road,Kimberton, PA 194429. Exclusive or additional remedyWarranty and remedy provided are exclusive and in lieu of allother obligations, liabilities, or express warranties, excludesUCC warranties. Specifications, descriptive information,recommendations, or test results provided by MBT do notconstitute warranties. In no event shall MBT be liable to ownerin tort, for negligence, strict liability, or otherwise for any loss ordamage resulting from any material defect.Remedy provided in the warranty is the sole and exclusiveremedy provided by Monsey Bakor to the owner for any and allclaims arising under, in connection with, or in any way relatedto the Monsey Bakor products; excludes all other warranties,guarantees, conditions, and representations; excludes UCCwarranties.The warranty is in lieu of and excludes all other warranties,guarantees, conditions, and representations; excludes UCCwarranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoMBT's determination Neutral (no provision) Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 9, 10, 12, 13, 15, 16, 19, 20, 22, 24, 25.Warranty also specifically excludes losses, damages, or leaksresulting from any animal or insect, willful misrepresentation orfraud by owner, and exposure to ionized radiation orcontamination by radioactivity from nuclear fuel or nuclearwaste.1, 3, 4, 5, 8, 9, 11, 17, 19; also excludes normal wear and tearand aesthetic diminution.1, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 19, 21; also excludesdeterioration of flashings where water has been allowed toenter behind the base flashing from sources other than throughthe membrane or base flashing.13. Wind coverage/exclusions Warranty excludes windstorms and hurricanes. [MBT indicatesthat there is no coverage for damage caused by wind.]Monsey Bakor indicates that the warranty covers winds up tofresh gales, which are defined on the Beaufort Scale as windsranging from 39 to 46 mph. The warranty excludes roofdamage from fresh gale force winds.No coverage for damage caused by wind14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)L B, C, H, I, R B, C, H, I, R15. Cost to obtain None None None634

16. Minimum charge None Minimum roof size of 50 squares None17. Ineligible structure or building use Coolers, cold-storage, or freezer buildings None None18. Pre-construction notice andapproval requirementsNone required. None None19. Approved, authorized, or licensedrequirements No No No20. Job inspection policy No on-site inspections No on-site inspections No on-site inspections21. Contractor’s post-installationobligationNone; material-only warranty None; material-only warranty None; material-only warranty22. Backed by named insurance orsuretyNo; MBT indicates that it carries $100 million general liabilityinsurance covering its warranty obligations.No; Monsey Bakor indicates that it carries umbrella liabilityinsurance covering its warranty obligations in the amount of$10 million.No; Monsey Bakor indicates that it carries umbrella liabilityinsurance covering its warranty obligations in the amount of$10 million.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionMBT manufactures and sells product. Monsey Bakor manufacturers and sells the product. Monsey Bakor manufacturers and sells the product.No renewal provision No renewal provision No renewal provision25. Assignability Not assignable; warranty accrues to original owner named inwarranty and shall not accrue to the benefit of or be assignableto any tenant, successor, purchaser, or assignee of originalowner.The warranty is not assignable without Monsey Bakor's priorwritten consent.The warranty is not assignable without Monsey Bakor's priorwritten consent.26. Special features/conditions <strong>Roofing</strong> contractor must complete warranty registration andmail promptly along with proof of purchase to MBT offices tovalidate warranty.27. Executed by owner NoPursuant to the warranty, the owner authorizes Monsey Bakorto investigate or cause to be investigated the alleged materialdefect of the Monsey Bakor products on the owner's behalf.Should the alleged material defect or the remedy sought by theowner lie outside the scope of the warranty, the owner agreesto promptly reimburse Monsey Bakor for the cost of any suchinvestigation, including repair costs.The owner shall bear any expense of removing and replacingtraffic walkways or other structures to allow repairs to be madewhen necessary.Yes; the warranty does not come into force until receipt of asigned copy by Monsey Bakor and owner.Pursuant to the warranty, the owner authorizes Monsey Bakorto investigate or cause to be investigated the alleged materialdefect of the Monsey Bakor products on the owner's behalf.Should the alleged material defect or the remedy sought by theowner lie outside the scope of the warranty, the owner agreesto promptly reimburse Monsey Bakor for the cost of any suchinvestigation, including repair costs.Monsey Bakor does not authorize any person, including itsrepresentatives, to make any representation or to offer anywarranty, condition or guarantee in respect to the product otherthan this warranty.Yes; the warranty does not come into force until receipt of asigned copy by Monsey Bakor and owner.635

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Monsey Bakor Mule-Hide Products Mule-Hide Products2. Title, original publication date, andidentifying symbol, if anyΑGold Seal <strong>Roofing</strong> & Waterproofing Membrane Warranty≅;09/96ΑMule-Hide Membrane Material Warranty≅; May 1, 1994ΑMule-Hide Products Co., Inc. Premium System Warranty forCommercial Buildings≅; May 1, 19943. Product, specification, or systemcoveredModified Plus Modified Bitumen roofing products and systemsEPDM Membranes, Hypalon Membranes, Thermoplastic(PVC) MembranesEPDM systems: ballasted, mechanically attached, fullyadhered; Hypalon systems: ballasted, mechanically attached,fully adhered; Thermoplastic (PVC) systems: mechanicallyattached, fully adhered4. Scope of coverage Material and workmanship; Monsey Bakor warrants that themembrane system, including field and flashing membranes,will remain in a watertight condition. Only water leakagethrough the membrane shall be considered a defect coveredunder the warranty.Material only; Mule-Hide warrants that the Mule-Hide roofingmembrane is free of manufacturing defects at the time ofdelivery, that the membrane will not prematurely deterioratedue to weathering to the extent that it becomes incapable ofmaintaining a watertight condition as a single-ply roofingmembrane, and that the membrane is manufactured inaccordance with the manufacturer's specifications.Material and workmanship; Mule-Hide warrants that it will beresponsible for the repair of leaks in the Mule-Hide StandardSystem. For purposes of this war-ranty, System means onlythe membrane, other components supplied by Mule-Hide,and will exclude the roof insulation, deck, support system,and metal flashings.5. Length of coverage12, 15, or 20 years (Monsey Bakor indicates that warrantycoverage depends upon specification and specific productused. Standard term is 12 years).EPDM Membrane: 5, 10, 15, 20 years (black only); Hypalonmembrane: 5, 10, 15 years; PVC Membrane: 5, 10, 15 years10 or 15 years6. Nature of remedy Monsey Bakor's liability limited to replacement of materialsand cost of labor necessary to maintain or restore the surfaceto which the membrane is applied in a watertight condition.7. Monetary limitations None stated8. Notification requirements Written notice of any defect of the membrane within 30 daysof the defect to Monsey Bakor, Cold Stream Road,Kimberton, PA 194429. Exclusive or additional remedy Remedy provided in the warranty is the sole and exclusiveremedy provided by Monsey Bakor to the owner for any andall claims arising under, in connection with, or in any wayrelated to the membrane or its installation; excludes all otherwarranties, guarantees, conditions, and representations;excludes UCC warranties.If the membrane prematurely fails due to weathering ormanufacturing defects, Mule-Hide will be liable for the cost ofthe material affected at the time of the claim, prorated forservice to date of the claim. Mule-Hide will furnish ownerrepair material for the affected area or credit to be appliedtoward the purchase of a new membrane. Warranty does notcover the cost of installation of the repair material. Labor andaccessories, including but not limited to flashings, adhesivesand caulking are not covered.The maximum prorated value allowed for repair or credit shallnot exceed the original purchase price of the membrane.Written notification within 30 days of a failure in themembrane or purported defect by certified mail to Mule-HideProducts Co., Inc., P.O. Box 1057, Beloit, WI 53512-1057,Attention: Warranty DepartmentWarranty and remedies provided are exclusive and in lieu ofany other remedy or warranty, whether written, oral, implied orstatutory; excludes UCC warranties.The owner's remedies and Mule-Hide's liability shall belimited to Mule-Hide's repair of the system using methodsdetermined to be suitable at Mule-Hide's discretion.None stated.Written notice to Mule-Hide and contractor within ten daysafter owner or any of its agents discover or a reasonableperson in owner's or agent's position would have discoveredany leak.Warranty is the owner's sole and exclusive remedyfor failure of the Mule-Hide Standard System; warrantysupersedes any and all other express warranties; Mule-Hideshall not be liable under any circumstance or theory of action,including contract, tort, products liability, or otherwise for anyincidental or consequential damages, including loss of profitor damage to building, merchandise and loss or damagecaused or contributed to by Mule-Hide's approval of thecontractor or inspection of, or omission to inspect, thebuilding roof; excludes UCC warranties.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicabilityNeutral (no provision)Mule-Hide's determinationMule-Hide's determination (See Special Features/Conditions.)12. Specific exclusions from coverage(see item 12 in Introduction)1, 3, 4, 5, 6, 8, 11, 12, 17; also excludes normal wear andtear and aesthetic diminution.1, 2, 3, 12, 16, 231, 3, 4, 5, 7, 10, 11, 13, 16, 22, 23, 24. (Warranty alsoexcludes the infestation or presence of insects or an animal.)636

13. Wind coverage/exclusions14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Monsey Bakor indicates that warranty covers roof damageresulting from wind speeds up to 55 mph. The warrantyexcludes damage caused by winds exceeding 55 mph asdetermined by the U.S. or Canadian Weather Bureau,depending on project location.B, C, H, I, R CWarranty excludes wind, hurricanes, and tornadoes. Mule-Hide indicates that there is no coverage for damage causedby wind.Warranty excludes wind speeds in excess of 55 mph,hurricanes, and tornadoes. Mule-Hide indicates that warrantycovers roof damage resulting from wind speeds up to 55mph.B, C, F (warranty references owner's care and maintenanceinformation), G, K. Warranty also is cancelled if there is aninternal positive pressure condition that causes or contributesto a partial or total failure of the roof.15. Cost to obtain 12 yrs: $6.00/sq; 15 yrs: $10.00/sq; 20 yrs: $15.00 sq 10 yrs: $25.00; 20 ys: $2.00/sq (EPDM black only) 10 yrs: $8.00/sq; 15 yrs: $14.00/sq16. Minimum charge 12 years: $300; 15 years: $500; 20 years: $750 10 years: $25.00 10 years: $800; 15 years: $1,25017. Ineligible structure or building use Cold-storage facilities; all residential buildings other thanmultiple dwellingsNoneResidences18. Pre-construction notice andapproval requirementsThe contractor must submit details of project, including deckconstruction, vapor retarder, insulation materials, and allflashing details prior to installation and obtain approval.Submit pre-job survey form and warranty application to Mule-Hide Products Co. prior to job commencement.Submit pre-job survey form and warranty application to Mule-Hide Products Co. for approval prior to job commencement.19. Approved, authorized, or licensedrequirementsYes No Yes20. Job inspection policyMonsey Bakor personnel make on-site inspections prior to,during (as often as required), and after application, as well astwo years following completion; no charge.No on-site inspectionsMule-Hide field representative makes on site inspections priorto, during, and after completion and two years after issuanceof warranty; no charge.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs to workmanshipdeficiencies for two years.None; material-only warrantyContractor is obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; Monsey Bakor indicates that it carries umbrella liabilityinsurance covering its warranty obligations in the amount of$10 million.No; Mule-Hide indicates that it does not carry insurancecovering its warranty obligations.No; Mule-Hide indicates that it does not carry insurancecovering its warranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionMonsey Bakor manufacturers and sells the product. Mule-Hide sells the product only. Mule-Hide sells the product only.No renewal provision No renewal provision No renewal provision25. Assignability The warranty is not assignable without Monsey Bakor's priorwritten consent.26. Special features/conditions Pursuant to the warranty, the owner authorizes Monsey Bakorto investigate or cause to be investigated the alleged materialdefect of the Monsey Bakor products on the owner's behalf.Should the alleged material defect or the remedy sought bythe owner lie outside the scope of the warranty, the owneragrees to promptly reimburse Monsey Bakor for the cost ofany such investigation, including repair costs.The owner shall bear any expense of removing andreplacing traffic walkways or other structures to allow repairsto be made when necessary.27. Executed by ownerYes; the warranty does not come into force until receipt of asigned copy by Monsey Bakor and owner.No restrictions stated.No representative has the authority to make anyrepresentations or promises except as stated in warranty.NoWarranty is not assignable by owner; however, Mule-Hide mayauthorize a new warranty if a written request for a new warranty issubmitted to Mule-Hide by the owner and the owner is in goodstanding un-der warranty, the roof is inspected by Mule-Hide within a30-day period prior to the proposed effective date of the new warrantyand the condition of the roof is approved by Mule-Hide and anadministration and reinspection fee in an amount determined by Mule-Hide is paid to Mule-Hide. A new warranty will then be issued to andexecuted by the new owner for the remaining term of warrantycontaining the terms and conditions required by Mule-Hide.Any dispute, controversy, or claim between owner and Mule-Hidearising out of or related to warranty or the building shall be settled byfinal and binding arbitration in accordance with the rules of theAmerican Arbitration <strong>Association</strong> for the Construction Industry. Areinspection fee (in accordance with Mule-Hide's standard charges)shall be paid by Owner to Mule-Hide in the event the cause of the leakis not covered by the warranty.Mule-Hide is not liable for any promise, represen-tation or otherresponsibility of the contractor. Warranty is not binding upon Mule-Hide unless executed by an executive officer of Mule-Hide. Norepresentative or employee of Mule-Hide may vary this warrantywithout the prior written consent of the board of dir-ectors of Mule-Hide.The owner acknowledges that owner had a duty to exercisereasonable care in the selection of a contractor.Yes; owner expressly accepts Mule-Hide's terms, conditions,and limitations.637

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Mule-Hide Products Olympic Rubber <strong>Roofing</strong> Systems Peformance Roof Systems, Inc. (PRS)2. Title, original publication date, andidentifying symbol, if anyΑMule-Hide Products Co., Inc. Standard System Warranty forCommercial Buildings≅; May 1, 1994"Watershield & Waterguard System Warranty"; December 1,1996ΑDerbigum Ten Year Limited Material Warranty≅; October 1,19933. Product, specification, or systemcoveredEPDM systems: ballasted, mechanically attached, fullyadhered; Hypalon systems: ballasted, mechanically attached,fully adhered; Thermoplastic (PVC) systems: mechanicallyattached, fully adheredOlympic EPDM Rubber <strong>Roofing</strong> System: Watershield,Waterguard, Waterguard MRDerbigum XPS, Derbigum XPS/FR, Derbicolor XPS,Derbicolor XPS/FR, Derbigum GP, Derbicolor GP, DerbigumGP/FrR, Derbicolor GP/FR, Derbibase4. Scope of coverageMaterial and workmanship; Mule-Hide warrants that it will beresponsible for the repair of leaks in the Mule-Hide StandardSystem. For purposes of this warranty, System means onlythe membrane, other components supplied by Mule-Hide,and will exclude the roof insulation, deck, support system,and metal flashings.Material and workmanship; Olympic warrants that Olympicwill provide, at its expense, all materials and all labornecessary to render the installed roofing system watertight.Material only; PRS warrants that the roofing material andflashing, if properly handled and installed according to currentPRS specifications, shall be manufactured to meet allpublished product specifications and will be free of any defectwhich would inhibit such material's ability to properly perform.5. Length of coverage 10 or 15 years10 years. (Warranty form allows for different warranty periodsto be inserted for Olympic to supply materials versus labornecessary to make roof watertight.)10 years6. Nature of remedyThe owner's remedies and Mule-Hide's liability shall belimited to Mule-Hide's repair of the system using methodsdetermined to be suitable at Mule-Hide's discretion.Olympic will provide, at its expense, all materials and all labornecessary to render the installed roofing system watertight.Should the PRS material not properly perform, PRS shalleither refund the original purchase price of the material orreplace the material found to be defective.7. Monetary limitations None stated.8. Notification requirements9. Exclusive or additional remedyWritten notice to Mule-Hide and contractor within ten daysafter owner or any of its agents discover or a reasonableperson in owner's or agent's position would have discoveredany leak.Warranty is the owner's sole and exclusive remedy for failureof the Mule-Hide Standard System; warranty supersedes anyand all other express warranties; Mule-Hide shall not be liableunder any circumstance or theory of action, includingcontract, tort, products liability, or otherwise for any incidentalor consequential damages, including loss of profit or damageto building, merchandise and loss or damage caused orcontributed to by Mule-Hide's approval of the contractor orinspection of, or omission to inspect, the building roof;excludes UCC warranties.Expenses incurred by Olympic are cumulative and are limitedto the owner's original cost of the Olympic roofing systeminstalled.Written notification within 30 days following discovery of anyfailure or possible failure of the installed roofing system.Warranty supersedes and is in lieu of all other expressedwarranties that are in conflict.PRS' exclusive responsibility and liability will be to replace thematerial or to give a full refund for the full amount of thepurchase price.None stated.Warranty is in lieu of all other warranties; PRS not liable forany damages based upon negligence, breach of warranty,strict liability, or any other legal theory of liability other thanexclusive liability set forth in warranty; excludes UCCwarranties.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicabilityMule-Hide's determination (See Special Features/Conditions.)Neutral (no provision)Neutral (no provision)12. Specific exclusions from coverage(see item 12 in Introduction)1, 3, 4, 5, 7, 10, 11, 13, 16, 22, 23, 24. (Warranty alsoexcludes the infestation or presence of insects or an animal.)1, 3, 4, 5, 6, 12 (including care and maintenance guidelinesprinted on reverse side of warranty), 15, 16, 18None listed; material-only warranty13. Wind coverage/exclusionsWarranty excludes wind speeds in excess of 55 mph,hurricanes, and tornadoes. Mule-Hide indicates that warrantycovers roof damage resulting from wind speeds up to 55mph.Olympic indicates warranty covers roof damage resulting fromwind speeds up to 40 mph. Warranty excludes gale forcewinds, hurricanes and tornadoes.No coverage for damage caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F (warranty references owner's care and maintenanceinformation), G, K. Warranty also is cancelled if there is aninternal positive pressure condition that causes or contributesto a partial or total failure of the roof.A, B, C, D, H, R None listed.15. Cost to obtain10 years:$5.00/square for Hypalon, thermoplastics;$6.00/square for EPDM$3.00/squareNone638

16. Minimum charge 10 years: $500; 15 years: $900 $250 None17. Ineligible structure or building use Residences Private residences None18. Pre-construction notice andapproval requirementsSubmit pre-job survey form and warranty application to Mule-Hide Products Co. for approval prior to jobcommencement.The contractor is to submit pre-job survey, including drawingand scope of work.None required.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policyMule-Hide field representative makes on site inspections priorto, during, and after completion and two years after issuanceof warranty; no charge.Olympic authorized representative makes on-site inspectionsafter application and prior to issuance of warranty; Αspotcheck≅ inspections are made after two years; no charge.No on-site inspections.21. Contractor’s post-installationobligationContractor is obligated to make repairs to workmanshipdeficiencies for two years.The contractor is obligated to make repairs to workmanshipdeficiencies for two yearsNone; material-only warranty22. Backed by named insurance orsuretyNo; Mule-Hide indicates that it does not carry insurancecovering its warranty obligations.NoNo; PRS indicates that it does not carry insurance coveringits warranty obligations.23. Issuing entity manufactures and/orsells productsMule-Hide sells the product only.Olympic Rubber <strong>Roofing</strong> Systems manufactures and sells theproduct.PRS manufactures and sells product.24. Conditions for renewal orextensionNo renewal provision No renewal provision No renewal provision25. AssignabilityWarranty is not assignable by owner; however, Mule-Hidemay authorize a new warranty if a written request for a newwarranty is submitted to Mule-Hide by the owner and theowner is in good standing under warranty, the roof isinspected by Mule-Hide within a 30-day period prior to theproposed effective date of the new warranty and the conditionof the roof is approved by Mule-Hide and an administrationand reinspection fee in an amount determined by Mule-Hideis paid to Mule-Hide. A new warranty will then be issued toand executed by the new owner for the remaining term ofwarranty containing the terms and conditions required byMule-Hide.No restrictions stated; warranty requires that Olympic benotified in writing within 30 days upon transfer of ownership.No restrictions stated.26. Special features/conditionsAny dispute, controversy, or claim between owner and Mule-Hide arising out of or related to warranty or the building shallbe settled by final and binding arbitration in accordance withthe rules of the American Arbitration <strong>Association</strong> for theConstruction Industry. A reinspection fee (in accordance withMule-Hide's standard charges) shall be paid by Owner toMule-Hide in the event the cause of the leak is not covered bythe warranty.Mule-Hide is not liable for any promise, representation orother responsibility of the contractor. Warranty is not bindingupon Mule-Hide unless executed by an executive officer ofMule-Hide. No representative or employee of Mule-Hide mayvary this warranty without the prior written consent of theboard of directors of Mule-Hide.The owner acknowledges that owner had a duty toexercise reasonable care in the selection of a contractor.27. Executed by ownerYes; owner expressly accepts Mule-Hide's terms, conditions,and limitations.NoYes; owner must execute and return to PRS the ΑTen YearLimited Material Warranty≅ notification card.639

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Performance Roof Systems, Inc. (PRS) Performance Roof Systems, Inc. (PRS) Performance Roof Systems, Inc. (PRS)2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcovered“Derbigum Roof Service Contract≅; October 1, 1993 ΑDerbigum Roof System Guaranty≅; October 1, 1993 ΑDerbigum Roof Membrane Guaranty≅; October 1, 1993Derbigum XPS, Derbigum XPS/FR, Derbicolor XPS,Derbicolor XPS/FR, Derbigum GP, Derbicolor GP, DerbigumGP/FR, Derbicolor GP/FR, DerbibaseDerbigum XPS, Derbigum XPS/FR, Derbicolor XPS,Derbicolor XPS/FR, Derbigum GP, Derbicolor GP, DerbigumGP/FR, Derbicolor GP/FR, DerbibaseDerbigum XPS, Derbigum XPS/FR, Derbicolor XPS,Derbicolor XPS/FR, Derbigum GP, Derbicolor GP, DerbigumGP/FR, Derbicolor GP/FR, Derbibase4. Scope of coverage Material and workmanship; PRS guarantees that it will under-take allactions necessary to keep the PRS roof system in a watertightcondition and will promptly repair deficiencies in the system's conditionthat could endanger the membrane's ability to remain watertightprovided that such actions and repairs are a result of improperinstallation of the system, membrane performance, or ordinary wearand tear by the elements. The roof system only covers materials PRSsells or approves, other than metal. Building owner is responsible forany costs to repair any building component other than the system ifleaks occur. The system consists of all roof com-ponents from the roofmembrane to the roof deck, including approved base and ply sheets;all adhesives, insulations, and fasteners; but excluding roof decks andcoatings or surfacing not factory applied.Material and workmanship; PRS guarantees that it will undertake allactions necessary to keep the PRS roof system in a watertightcondition and will promptly repair deficiencies in the system's conditionthat could endanger the membrane's ability to remain watertightprovided that such actions and repairs are a result of improperinstallation of the system, membrane per-formance, or ordinary wearand tear by the elements. The roof system only covers materials PRSsells or approves, other than metal. Building owner is responsible forany costs to repair any building component other than the system ifleaks occur. The system consists of all roof components from the roofmembrane to the roof deck, including approved base and ply sheets;all adhesives, insulations, and fasteners; but excluding roof decks andcoatings or surfacing not factory applied.Material and workmanship; PRS guarantees that it will undertakeall actions necessary to keep the Dertbigum roofing and flashingmembrane in a watertight condition and will promptly repairdeficiencies in the membrane=s condition that could endanger themembrane's ability to remain watertight provided that suchactions and repairs are a result of improper installation of themembrane, membrane performance, or ordinary wear and tear bythe elements. The roof system only covers materials PRS sells orapproves, other than metal. Building owner is responsible for anycosts to repair any building component other than the membraneif leaks occur.5. Length of coverage 10 years 10 years 10 years6. Nature of remedy PRS' exclusive responsibility and liability is to make repairsthat may be necessary to maintain the roofing system in awatertight condition. PRS' liability is limited to the repair orreplacement of any portion of the system damaged by leaksthat are a result of covered causes (see Special Features-/Conditions).7. Monetary limitationsNo limit to PRS' expenditures for damages covered by thisguaranty.PRS' exclusive responsibility and liability is to make repairsthat may be necessary to maintain the roofing system in awatertight condition. PRS' liability is limited to the repair orreplacement of any portion of the system damaged by leaksthat are a result of covered causes (see Special Features-/Conditions).No limit to PRS' expenditures for damages covered by thisguaranty.PRS' exclusive responsibility and liability is to make repairsthat may be necessary to maintain the roofing system in awatertight condition. PRS' liability is limited to the repair orreplacement of any portion of the membrane damaged byleaks that are a result of covered causes (see Special Features/Conditions).No limit to PRS' expenditures for damages covered by thisguaranty.8. Notification requirements Contact PRS immediately at (800) 727-9872 if roof leaks. Contact PRS immediately at (800) 727-9872 if roof leaks. Contact PRS immediately at (800) 727-9872 if roof leaks.9. Exclusive or additional remedy PRS disclaims any warranty other than what is specificallydescribed in this guaranty. PRS shall not be liable for damagesthat are based upon negligence, breach of warranty,strict liability, or any other legal theory of liability other thanthe exclusive liability set forth in the guaranty; excludes UCCwarranties.10. Inclusion of consequentialdamagesPRS disclaims any warranty other than what is specificallydes-cribed in this guaranty. PRS shall not be liable fordamages that are based upon negligence, breach ofwarranty, strict lia-bility, or any other legal theory of liabilityother than the exclu-sive liability set forth in the guaranty;excludes UCC warranties.No No NoPRS disclaims any warranty other than what is specificallydescribed in this guaranty. PRS shall not be liable fordamages that are based upon negligence, breach ofwarranty, strict lia-bility, or any other legal theory of liabilityother than the exclu-sive liability set forth in the guaranty;excludes UCC warranties.11. Determination of warrantyapplicabilityNeutral (See Special Features/Conditions.) Neutral (See Special Features/Conditions.) Neutral (See Special Features/Conditions.)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 17, 22, 24; also excludesdamages resulting from vermin, etc.1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 17, 22, 24; also excludesdamages resulting from vermin, etc.1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 17, 22, 24; also excludesdamages resulting from vermin, etc.13. Wind coverage/exclusions No coverage for damage caused by wind. No coverage for damage caused by wind. No coverage for damage caused by wind.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, F, N; warranty indicates that lack of regular and routinemaintenance may void contract.B, F, N; warranty indicates that lack of regular and routinemaintenance may void contract.15. Cost to obtain $12.50/square $7.50/square $6.00/square16. Minimum charge $1,250 $1,000 $750B, F, N; warranty indicates that lack of regular and routinemaintenance may void contract.17. Ineligible structure or building use Condominiums or residential dwellings without prior PRSapproval; patios, promenades, parking roofs; partial roofapplications, phase construction, heated tanks, silo facilities,freezer, and cold-storage facilitiesCondominiums or residential dwellings without prior PRSappro-val; patios, promenades, parking roofs; partial roofapplications, phase construction, heated tanks, silo facilities,freezer, and cold-storage facilitiesCondominiums or residential dwellings without prior PRSappro-val; patios, promenades, parking roofs; partial roofapplications, phase construction, heated tanks, silo facilities,freezer, and cold-storage facilities18. Pre-construction notice andapproval requirementsPRS requires a 14-day guaranty application notification inorder to verify specifications and to assign a roof auditor.PRS requires a 14-day guaranty application notification inorder to verify specifications and to assign a roof auditor.PRS requires a 14-day guaranty application notification inorder to verify specifications and to assign a roof auditor.640

19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy PRS employee or an approved roof auditor performs on-siteinspections during application (depending on job size), aftercompletion, prior to issuance of guaranty, as well as twoyears after issuance of guaranty; no charge.PRS employee or an approved roof auditor performs on-siteinspections during application (depending on job size), aftercompletion, prior to issuance of guaranty, as well as twoyears after issuance of guaranty; no charge.PRS employee or an approved roof auditor performs on-siteinspections during application (depending on job size), aftercompletion, prior to issuance of guaranty, as well as twoyears after issuance of guaranty; no charge.21. Contractor’s post-installationobligationContractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; PRS indicates that it does not carry insurance coveringits warranty obligations.No; PRS indicates that it does not carry insurance coveringits warranty obligations.No; PRS indicates that it does not carry insurance coveringits warranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionPRS manufactures and sells product. PRS manufactures and sells product. PRS manufactures and sells product.No renewal provision No renewal provision No renewal provision25. Assignability No restrictions stated. No restrictions stated. No restrictions stated.26. Special features/conditionsOwner shall be invoiced for reasonable repair costs for re-pairsand a nominal inspection charge if leaks reported to PRS are aresult of causes not covered by guaranty.In the event an emergency situation exists, owner may makenecessary temporary repairs, either directly or by con-tacting theoriginal roofing contractor. Upon investigation by a PRSrepresentative, owner shall be reimbursed for reasonableemergency repair costs if the leak is the responsibility of PRS.In the event PRS must make repairs, owner is responsible forproviding a clean roof surface such that repairs can be made.This shall include, but not be limited to, the removal of water, ice,snow, dirt, and debris, as well as pavers on in-verted roofmembrane systems, prior to permanent repairs being made.PRS' specifications and all details must be properly se-lectedby an architect or an engineer to meet specific needs and theapplicable design loads for each project. The issuance of thisguaranty by PRS, the inspection of the system application (or anyother parts of the roofing assembly), or any review of projectspecifications or plans, does not ex-tend the terms and conditionsof the guaranty and shall not constitute any substitution ofprofessional judgment required in connection with the design ofthis project by the building owner or its design professional.Contract is not a maintenance agreement or an insurancepolicy; routine inspections and maintenance of the system mustbe completed by the building owner on a regular basis and isowner's responsibility.In the event PRS, the roofing contractor, and the owner cannotagree as to responsibilities under the guaranty, the parties agreeto submit any such disagreement to arbitration as an exclusiveremedy for resolution of such disagreement. All partiesspecifically waive any litigation alternative for resolution of anysuch dispute. (a) Any arbitration shall proceed in accordance withthe directions of a professional roofing consultant mutuallyselected by the parties. In the event the parties cannot agree onan arbitrator, each shall select an independent professionalroofing consultant astheir representative and these consultants shall, in turn, selectanother, unaffiliated professional roofing consultant who will serveas the arbitrator. (b) All costs of any arbitrator(s) shall beincluded in the final judgment of the arbitrator. (c) Once adecision is reached by any arbitrator, the prevailing party canpursue whatever judicial action would be appropriate to enforcesuch decision.Owner shall be invoiced for reasonable repair costs for repairsand a nominal inspection charge if leaks reported to PRS are aresult of causes not covered by guaranty.In the event an emergency situation exists, owner may makenecessary temporary repairs, either directly or by contacting theoriginal roofing contractor. Upon investigation by a PRSrepresentative, owner shall be reimbursed for reasonableemergency repair costs if the leak is the responsibility of PRS.In the event PRS must make repairs, owner is responsible forproviding a clean roof surface such that repairs can be made.This shall include, but not be limited to, the removal of water, ice,snow, dirt, and debris, as well as pavers on inverted roofmembrane systems, prior to permanent repairs being made.PRS' specifications and all details must be properly selectedby an architect or an engineer to meet specific needs and theapplicable design loads for each project. The issuance of thisguaranty by PRS, the inspection of the system application (or anyother parts of the roofing assembly), or any review of pro-jectspecifications or plans, does not extend the terms and con-ditionsof the guaranty and shall not constitute any substitution ofprofessional judgment required in connection with the design ofthis project by the building owner or its design professional.Guaranty is not a maintenance agreement or an insurancepolicy; routine inspections and maintenance of the system mustbe completed by the building owner on a regular basis and isowner's responsibility.In the event PRS, the roofing contractor, and the owner cannotagree as to responsibilities under the guaranty, the parties agreeto submit any such disagreement to arbitration as an exclusiveremedy for resolution of such disagreement. All partiesspecifically waive any litigation alternative for resolution of anysuch dispute. (a) Any arbitration shall proceed in accor-dancewith the directions of a professional roofing consultant mutuallyselected by the parties. In the event the parties can-not agree onan arbitrator, each shall select an independent professionalroofing consultant as their representative and these consultantsshall, in turn, select another, unaffiliated professional roofingconsultant who will serve as the arbitrator. (b) All costs of anyarbitrator(s) shall be included in the final judgment of thearbitrator. (c) Once a decision is reached by any arbitrator, theprevailing party can pursue whatever judicial action would beappropriate to enforce such decision.Owner shall be invoiced for reasonable repair costs for repairsand a nominal inspection charge if leaks reported to PRS are aresult of causes not covered by guaranty.In the event an emergency situation exists, owner maymake necessary temporary repairs, either directly or bycontacting the original roofing contractor. Upon investigation by aPRS representative, owner shall be reimbursed for reasonableemer-gency repair costs if the leak is the responsibility of PRS.In the event PRS must make repairs, owner is responsiblefor providing a clean roof surface such that repairs can be made.This shall include, but not be limited to, the removal of water, ice,snow, dirt, and debris, as well as pavers on inverted roofmembrane systems, prior to permanent repairs being made.PRS' specifications and all details must be properly selectedby an architect or an engineer to meet specific needs and theapplicable design loads for each project. The issuance of thisguaranty by PRS, the inspection of the system application (or anyother parts of the roofing assembly), or any review of pro-jectspecifications or plans, does not extend the terms and con-ditionsof the guaranty and shall not constitute any substitution ofprofessional judgment required in connection with the design ofthis project by the building owner or its design professional.Guaranty is not a maintenance agreement or an insurancepolicy; routine inspections and maintenance of the system mustbe completed by the building owner on a regular basis and isowner's responsibility.In the event PRS, the roofing contractor, and the owner cannotagree as to responsibilities under the guaranty, the par-ties agreeto submit any such disagreement to arbitration as an exclusiveremedy for resolution of such disagreement. All par-tiesspecifically waive any litigation alternative for resolution of anysuch dispute. (a) Any arbitration shall proceed in accordance withthe directions of a professional roofing consultant mutuallyselected by the parties. In the event the parties can-not agree onan arbitrator, each shall select an independent professionalroofing consultant as their representative and these consultantsshall, in turn, select another, unaffiliated pro-fessional roofingconsultant who will serve as the arbitrator.(b) All costs of any arbitrator(s) shall be included in the finaljudgment of the arbitrator. (c) Once a decision is reached by anyarbitrator, the prevailing party can pursue whatever judicial actionwould be appropriate to enforce such decision.27. Executed by ownerYes; owner and roofing contractor must acknowledge andaccept the guaranty by signing.Yes; owner and roofing contractor must acknowledge andaccept the guaranty by signing.Yes; owner and roofing contractor must acknowledge and acceptthe guaranty by signing.641

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Protective Coatings, Inc. Republic Powdered Metals, Inc. (RPM) Republic Powdered Metals, Inc. (RPM)2. Title, original publication date, andidentifying symbol, if any"Protective Coatings, Inc. EPDM <strong>Roofing</strong> Limited YearWarranty""Republic Single Ply Systems Warranty"; September 1997;W001 9/97"Republic Single Ply Systems Total System Warranty";September 1997; W003 9/973. Product, specification, or systemcoveredProShield-Black, ProShield-White, ProShield-White FireRetardant, Black Fire Retardant Totally Adhered, PlateBonded, NP Mechanically Attached, BallastedGeoflex PIB (Polyisobutylene) and Cooley C3 Single PlySystemsGeoflex PIB (Polyisobutylene) and Cooley C3 Single PlySystems4. Scope of coverage Material and Workmanship; Protective Coatings warrants thatthe roofing membrane will be free from defects inworkmanship and materials and, when properly installed, willremain watertight.Material and workmanship; RPM warrants that the RepublicSingle Ply System will remain free from leaks resulting fromdefects in the manufacture of the materials or the improperinstallation thereof and that, should a leak occur in any areaof the Republic Single Ply System, RPM will promptly correctsuch leak at its own expense. Republic Single Ply Systemshall mean all integral field sheet and accessory materialsmanufactured and/or supplied by Republic.Material and workmanship; RPM warrants that the RepublicSingle Ply System will remain free from leaks resulting fromdefects in the manufacture of any materials and componentsas accepted by Republic and utilized in connection with theinstallation of the Republic Single Ply System or the improperinstallation and that, should a leak occur in any area of theRepublic Single Ply System, RPM warrants that it willpromptly correct such leak at its own expense. RepublicSingle Ply System shall mean all integral field sheet,accessory materials and components manufactured, suppliedand/or accepted by Republic.5. Length of coverage 5 or 10 years 10, 15 or 20 years 10, 15 or 20 years6. Nature of remedyProtective Coatings will repair or replace roofing system andpay transportation costs and all other costs necessary toremedy roof failure.RPM warrants that it will promptly correct leaks in any area ofthe Republic Single Ply System at its own expense.RPM warrants that it will promptly correct leaks in any area ofthe Republic Single Ply System at its own expense.7. Monetary limitationsProtective Coatings' obligation over the life of the warrantyshall not exceed owner's original cost of the installed roof.None stated.None stated.8. Notification requirements Written notice by registered mail to Protective Coatings' FortWayne, IN, office within 30 days of discovery of any defect orleak.Building owner must notify RPM immediately upon thediscovery of any leaks in the Republic Single Ply System andconfirm notification in writing within seven days after suchdiscovery.Building owner must notify RPM immediately upon thediscovery of any leaks in the Republic Single Ply System andconfirm notification in writing within seven days after suchdiscovery.9. Exclusive or additional remedy Owner's sole and exclusive remedy; no other warranties;excludes UCC warranties.Remedy in the warranty is the sole and exclusive remedyavailable to the building owner so that RPM's repairconstitutes fulfillment of all obligations. Warranty is in lieu ofany other guarantees or warranties, express or implied; norepresentative, employee, or agent of RPM or any otherperson has any authority to modify or enlarge the scope of thewarranty or to assume for RPM any additional or other liabilityin connection with Republic Single Ply System; excludesUCC warranties.Remedy in the warranty is the sole and exclusive remedyavailable to the building owner so that RPM's repairconstitutes fulfillment of all obligations. Warranty is in lieu ofany other guarantees or warranties, express or implied; norepresentative, employee, or agent of RPM or any otherperson has any authority to modify or enlarge the scope of thewarranty or to assume for RPM any additional or other liabilityin connection with the Republic Single Ply System; excludesUCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)No No NoNeutral (no provision) Neutral (no provision) Neutral (no provision)1, 2, 3, 4, 5, 6, 9, 10, 12, 13 1, 3, 5, 6, 7, 10, 11, 12, 15, 16, 17, 22, 23 1, 3, 5, 6, 7, 10, 11, 12, 15, 16, 17, 22, 2313. Wind coverage/exclusions Warranty excludes damage caused by wind. Warranty excludes hurricanes and tornadoes. RPM indicatesthat warranty covers roof damage resulting from wind speedsup to 73 mph.Warranty excludes hurricanes and tornadoes. RPM indicatesthat warranty covers roof damage resulting from wind speedsup to 73 mph.642

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C A, B, C, F, G, H, I, J, L, M (See Special Features/ Conditions) A, B, C, F, G, H, I, J, L, M (See Special Features/Conditions)15. Cost to obtain 5 year: none; 10 year: $3.00/square10 years: $5.00/square; 15 years: $10.00/square;20 years: $20.00/square10 years: $5.00/square; 15 years: $10.00/square;20 years: $20.00/square16. Minimum charge 5 year: none; 10 year: $300 10 years: $500; 15 years: $1,000; 20 years: $2,000 10 years: $500; 15 years: $1,000; 20 years: $2,00017. Ineligible structure or building use Noncommercial installations None None18. Pre-construction notice andapproval requirementsA pre-installation notice form must be submitted andapproved in writing 14 days prior to start.Notice of award from contractor detailing job requirementsmust be approved by RPM prior to construction.Notice of award from contractor detailing job requirementsmust be approved by RPM prior to construction.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policyProtective Coatings' representative makes on-site inspectionupon completion of application; no charge.RPM technical service representative makes on-siteinspections prior to, during application and upon completion,prior to issuance of warranty; no charge.RPM technical service representative makes on-siteinspections prior to, during application and upon completion,prior to issuance of warranty; no charge.21. Contractor’s post-installationobligationContractor obligated to make repairs due to workmanshipdeficiencies for two years.Contractor obligated to make repairs to leaks andworkmanship deficiencies for two years.Contractor obligated to make repairs to leaks andworkmanship deficiencies for two years.22. Backed by named insurance orsuretyNo; Protective Coatings indicates that it carries $500,000general liability insurance.No; RPM indicates that it does not carry insurance coveringits warranty obligations.No; RPM indicates that it does not carry insurance coveringits warranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionProtective Coatings, Inc. manufactures and sells product. RPM manufactures and sells the materials. RPM manufactures and sells the materials.No renewal provision. No renewal extension. No renewal extension.25. Assignability Not assignable, but if the original owner is the developer orbuilder of the building, he may, within one year of completionof construction, request Protective Coatings, Inc. permit anassignment of the warranty to the purchase of the buildingfrom owner.Warranty is non-transferable.Warranty is non-transferable.26. Special features/conditions No representative has authority to make any representationsother than stated in the warranty.Owner agrees to accept RPM warranty as part of its purchaseof the Republic Single Ply System and understands that theliability of RPM relating to the Republic Single Ply System andits installation is limited to the obligation to address warrantyconcerns.Owner understands and agrees that the construction andinterpretation of the warranty shall be governed by the laws ofthe State of Ohio, excluding principles of conflicts of law.Owner agrees to follow and be bound by all terms andconditions stated in the Republic Care and MaintenanceGuide which is incorporated into the warranty by reference.Owner agrees to accept RPM warranty as part of its purchaseof the Republic Single Ply System and understands that theliability of RPM relating to the Republic Single Ply System andits installation is limited to the obligation to address warrantyconcerns.Owner understands and agrees that the construction andinterpretation of the warranty shall be governed by the laws ofthe State of Ohio, excluding principles of conflicts of law.Owner agrees to follow and be bound by all terms andconditions stated in the Republic Care and MaintenanceGuide which is incorporated into the warranty by reference.27. Executed by owner Yes See Special Features above. See Special Features above.643

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Republic Powdered Metals, Inc. (RPM) <strong>Roofing</strong> Products International Inc. (RPI) <strong>Roofing</strong> Products International Inc. (RPI)2. Title, original publication date, andidentifying symbol, if any"Manufacturer's Limited Warranty Material Only"; September1997; W004 9/97ΑLimited Membrane Only Warranty≅; RPI-54-692-5CΑLimited Warranty Form≅; Form RPI-91-31-1M3. Product, specification, or systemcoveredGeoflex, Cooley C3, HyShieldRPI EPDM .045 Black, .060 Black, .045 White, .060 White,RPI FR (Fire Retardant) EPDM .045 Black, .060 Black, .045White, .060 White.RPI EPDM .045 Black, .060 Black, .045 White, .060 White, RPIFR (Fire Retardant) EPDM .045 Black, .060 Black, .045 White.4. Scope of coverage \Material only; RPM warrants that the Republic product(s)were manufactured in accordance with RPM's specificationsand, when applied to smooth, dry compatible surfaces inaccordance with RPM's application instructions andspecifications, will remain free of voids, cracking and/orcrazing as a result of defects in the material.Material only; RPI warrants that the non-reinforced rubbermembrane sold as "First Grade" will be free from defects inmaterial and workmanship at time of installation and will notprematurely deteriorate to the point of failure because ofweathering if properly installed, maintained, and used forpurpose seller intended. This warranty refers to the membranematerial only. Flashings, adhesives, and other accessoriescontained in a membrane system are not covered bywarranty.Material and workmanship; RPI warrants to repair any leaks dueto defects in the RPI <strong>Roofing</strong> System materials or inworkmanship of the RPI-authorized roofing applicator.5. Length of coverage5, 10 or 15 years (RPM indicates that warranty coveragedepends upon specification and substrate used.)10 or 20 years5, 10, or 15 years6. Nature of remedy Should RPM's product(s) fail to conform to warranty, RPMshall, at its option, supply a sufficient quantity of materialsnecessary to remedy the defects, or the cash equivalent ofsame.If membrane proves to be defective in materials or workmanship,seller's liability and buyer's remedies limited torepair and replacement of the defective membrane at theFOB point in the original contract. If membrane showspremature deterioration because of weathering, seller'sliability and buyer's remedies are limited, at seller's option,to providing repair material for the original membrane orcredit to be applied toward purchase of new membrane.RPI will repair leaks in the RPI Rubber <strong>Roofing</strong> System.7. Monetary limitations RPM's total obligation over the life of the warranty shall notexceed the building owner's original cost of the RPMsupplied product(s).Value of remedy to be determined by seller based onnumber of remaining months of the unexpired warranty,prorated at the current prices for the membrane. Maximumprorated value allowed for repair or credit not to exceedoriginal membrane purchase price.RPI's obligation to remedy defects shall not exceed owner'soriginal cost of materials and labor for installation of the RPIroofing system.8. Notification requirements None Notification of breach of warranty within 30 days of discoveryof premature deterioration of membraneWritten notification within 30 days of discovery of any leaks, bycertified mail, return receipt requested, to RPI at 29542Manchester Drive, Elkhart, IN 46514, or other such address RPInotifies owner.9. Exclusive or additional remedy Remedy in warranty is the sole and exclusive remedyavailable to the building owner so that RPM's complianceconstitutes fulfillment of all obligations. Warranty is in lieu ofall other warranties, express or implied. No representative,employee, or agent of RPM or any other person has anyauthority to modify or enlarge the scope of the warranty or toassume for RPM any additional or other liability inconnection with the product; excludes UCC warranties.No warranties that extend beyond what is stated on warrantydocument; excludes UCC warranties.Warranty is in lieu of any and all other express warranties that arein conflict; no warranties that extend beyond what is stated onwarranty document.10. Inclusion of consequentialdamagesNo No No11. Determination of warrantyapplicabilityNeutral (no provision).Unclear; warranty states, ΑIf upon inspection by the Seller,the Membrane proves to be defective...≅Neutral (no provision)644

12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 6, 7, 10, 11, 12, 16, 17, 19, 20, 23 12, 191, 3, 4, 6, 7, 11, 12, 16, 17, 18, 22. Warranty also states that RPIshall have no obligation if leaks or damages are caused by failureof owner to comply with every condition, exclusion, or limitation inthe warranty document.13. Wind coverage/exclusions Warranty excludes gales, hurricanes and tornadoes. RPI indicates that there is no coverage for damage causedby wind.RPI indicates that warranty covers roof damage resulting fromwind speeds up to 39 mph. Warranty excludes gales, hurricanes,and tornadoes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, R None listed. C15. Cost to obtain None NoneBallasted systems: 5 years: $ 5.00/square,10 years: $ 8.00/square,15 years: $11.00/square;All other systems: 5 years: $ 2.00/square;10 years: $ 4.00/square,15 years: $ 8.00/square16. Minimum chargeNoneNoneBallasted systems: 5 years: $500, 10 years: $750,15 years: $1,150;All other systems: 5 years: $350, 10 years: $500,15 years: $85017. Ineligible structure or building use None NoneBuildings not used for commercial purposes, including buildingsused for residential, personal, family or household purposes;cold-storage buildings not approved prior to application; mechanicallyattached roofs on buildings more than four stories high18. Pre-construction notice andapproval requirementsRPM requires a Notice of Award on all projects showingpertinent information.NoneSubmittal of job start notification form, RPI-91 or RPI-50, to RPIheadquarters office for review by technical representative19. Approved, authorized, or licensedrequirementsYes No Yes20. Job inspection policy No on-site inspections. No on-site inspectionsRPI technical representative makes on-site inspection afterapplication, prior to issuance of warranty; no charge.21. Contractor’s post-installationobligationNone; material-only warranty.None; material-only warrantyContractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsuretyNo; RPM indicates that it does not carry insurance coveringits warranty obligations.No; RPI indicates that it does not carry insurance coveringits warranty obligations.No; RPI does not carry insurance covering its warrantyobligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionRPM manufactures and sells the product. RPI sells product only. RPI sells product only.No renewal provision. No renewal provision No renewal provision25. Assignability Warranty is non-transferable. No restrictions stated. No restrictions stated.26. Special features/conditionsThe owner understands and agrees that the constructionand interpretation of the warranty shall be governed by thelaws of the State of Ohio, excluding principles of conflicts oflaw.Warranty states that no representative of RPI has authorityto make any representations or promises except as stated inthe warranty document itself.No representative of RPI or any other person or entity has theauthority to make any representations or promises except asstated in warranty document.27. Executed by owner No No No645

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Sarnafil, Inc. Sarnafil, Inc. Seaman Corporation2. Title, original publication date, andidentifying symbol, if anyΑ10 Year System Warranty – Sarnafil <strong>Roofing</strong> Warrantyfor Commercial Building;≅ March 1995Α10 Year Standard Warranty - Sarnafil <strong>Roofing</strong> Warrantyfor Commercial Building≅; March 1995ΑMaterials Warranty for FiberTite <strong>Roofing</strong> Membrane≅3. Product, specification, or systemcoveredSarnafil G410, S327, G476 Sarnafil G410, S327, G476 FiberTite Single-Ply Roof4. Scope of coverageMaterial and workmanship; Sarnafil warrants that it willrepair leaks originating from the Sarnafil roofingmembrane, Sarnatherm insulation, Sarnafil roofingaccessories, or a defect in the Sarnafil authorizedapplicator's workmanship applied to the Saranfilmembrane.Material and workmanship; Sarnafil warrants that it willrepair leaks originating from the Sarnafil roofingmembrane or Sarnafil roofing accessories or a defect inthe Sarnafil authorized applicator's workmanship appliedto the Sarnafil membrane.Seaman warrants its FiberTite membrane materials to be inaccordance with its published specifications and free from materialdefects in components and workmanship that would affectperformance.5. Length of coverage 10 years 10 years 10 years6. Nature of remedy Sarnifil's liablity is limited to repair of Sarnafil's roofingmembrane, Sarnatherm insulation, or accessory.Sarnafil's liability limited to Sarnafil's repair of roofingmembrane or accessory.Seaman's obligation is limited to, at its option, allowance for credit,repair, or replacement of any material that may prove defectiveunder normal use and service. Seaman's liability is prorated suchthat Seaman's liability ranges from 100 percent if the defect occursin the first year to 8 percent if the defect occurs in the tenth year.7. Monetary limitations None stated. None stated. Seaman's prorated liability is based upon the original sales price.8. Notification requirementsWritten notification to Sarnafil, Canton Commerce Center,Canton, MA, within 30 days of discovery of each leak inthe roofing system.Written notification to Sarnafil, Canton Commerce Center,Canton, MA, within 30 days of discovery of each leak inthe roofing system.Written notification within 30 days of discovery of the alleged defectto Seaman Corporation.9. Exclusive or additional remedy Warranty is given in lieu of all other warranties; remediesstated in warranty are exclusive; seeks to exclude UCCwarranties.Warranty is given in lieu of all other warranties; remediesstated in warranty are exclusive; seeks to exclude UCC.No other warranties applicable to material; corrections to nonconformitiesand defects as provided for in the warranty shallconstitute fulfillment of all liabilities of Seaman to the customer,whether based on contract, negligence, or otherwise. Should thefabric prove defective to the extent that it precludes the remedying ofwarranted defects by repair or replacement, customer's sole andexclusive remedy shall be the refund of the purchase price of thefabric or the part thereof that is defective, upon its return to SeamanCorporation. No warranties or representations at any time by anysales representative, dealer, agent, or any person shall be effectiveto vary or expand the warranty; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoSarnafil's determination Sarnafil's determination Seaman's determination.12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 6, 7, 8, 12, 17, 23. <strong>Roofing</strong> damage by wind-blownobjects is also specifically excluded.1, 2, 3, 6, 7, 8, 12, 17, 23. <strong>Roofing</strong> damage by wind-blownobjects is also specifically excluded.1, 3, 13, 16, 18, 20, 21, 2313. Wind coverage/exclusionsSarnafil indicates that warranty covers roof damageresulting from wind speeds up to 60 mph. Warrantyexcludes windstorms in excess of 60 mph, hurricanes, andtornadoes.Sarnafil indicates that warranty covers roof damageresulting from wind speeds up to 60 mph. Warrantyexcludes windstorms in excess of 60 mph, hurricanes, andtornadoes.Warranty excludes hurricanes and tornadoes. Seaman indicatesthat warranty covers roof damage resulting from wind speeds up to73 mph.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)C, G C, G B, C15. Cost to obtain $6.00/square $6.00/square $9.00/square16. Minimum charge $800 $800 $900646

17. Ineligible structure or building use Private residences Private residences <strong>Roofing</strong> installations for personal, family, or household purposes.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsContractor is to submit a Sarnafil Αnotice of award≅ formto Sarnafil's technical department for review andacceptance prior to shipment of Sarnafil membrane andaccessories.Contractor is to submit a Sarnafil Αnotice of award≅ formto Sarnafil's technical department for review andacceptance prior to shipment of Sarnafil membrane andaccessories.Yes Yes YesContractor must submit FiberTite Αrequest for warranty form/roofaward information material submittal data≅ and obtain approvalbefore material can be shipped.20. Job inspection policy Sarnafil field technical representatives make on-siteinspections during application (determined by fieldrepresentative schedule) and after completion, as well astwo years after issuance of warranty; no charge.Sarnafil field technical representatives make on-siteinspections during application (determined by fieldrepresentative schedule) and after completion, as well astwo years after issuance of warranty; no charge.Seaman technical service representatives make on-site inspectionsprior to, during (interim inspections coordinated with representative'stravel schedule), and after completion, prior to issuance of warranty;no charge.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs toworkmanship deficiencies for two years.The contractor is obligated to make repairs toworkmanship deficiencies for two years.Contractor obligated to make repairs to workmanship deficienciesfor two years.22. Backed by named insurance orsuretyNo; Sarnafil indicates that it does not carry insurancecovering its warranty obligations.No; Sarnafil indicates that it does not carry insurancecovering its warranty obligations.No; Seaman indicates that it is self-insured.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionSarnafil manufactures and sells the product. Sarnafil manufactures and sells the product. Seaman manufactures and sells the product.No renewal provision. No renewal provision. No renewal provision25. Assignability The warranty is extended solely and exclusively to theowner of the building at the time the roofing membrane isinstalled and is not assignable or transferable unlessapproved in advance and in writing by Sarnafil and thecosts to process the transfer and to inspect and repair theroof, if necessary, are paid for by the original owner.The warranty is extended solely and exclusively to theowner of the building at the time the roofing membrane isinstalled and is not assignable or transferable unlessapproved in advance and in writing by Sarnafil and thecosts to process the transfer and to inspect and repair theroof, if necessary, are paid for by the original owner.Warranty may be assignable to a subsequent owner, only if theoriginal owner requests in writing that Seaman Corporation consentto an assignment to the purchaser of the building, which consent willnot be unreasonably withheld.26. Special features/conditionsShould the roofing membrane be concealed, the cost ofexposure of the roofing membrane for purposes ofSarnafil's investigation and/or repair, such as removal andreplacement of any paving or overburden, shall be theowner's responsibility.Should the roofing membrane be concealed, the cost ofexposure of the roofing membrane for purposes ofSarnafil's investigation and/or repair, such as removal andreplacement of any paving or overburden, shall be theowner's responsibility.The owner will be responsible for the cost of investigation if any leakis determined not to be covered by warranty.Any controversy or claim arising out of or relating to thewarranty shall be settled by arbitration in Boston, Mass. bythe American Arbitration <strong>Association</strong> in accordance withthe Construction Industry Arbitration Rules, and judgmentupon the arbitration award may be entered in any courthaving jurisdiction thereof. No representative of Sarnafilhas authority to make any representations or promisesexcept as stated in the warranty.Any controversy or claim arising out of or relating to thewarranty shall be settled by arbitration in Boston, Mass. bythe American Arbitration <strong>Association</strong> in accordance withthe Construction Industry Arbitration Rules, and judgmentupon the arbitration award may be entered in any courthaving jurisdiction thereof. No representative of Sarnafilhas authority to make any representations or promisesexcept as stated in the warranty.27. Executed by owner Yes Yes Yes647

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Seaman Corporation Seaman Corporation Seaman Corporation2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredΑWarranty for Commercial <strong>Roofing</strong>≅ ΑWarranty for Commercial <strong>Roofing</strong>≅ ΑMaterials Warranty for FiberTite <strong>Roofing</strong> Membrane≅FiberTite <strong>Roofing</strong> Systems FiberTite Single-Ply Roof FiberTite <strong>Roofing</strong> Systems4. Scope of coverage Material and workmanship; Seaman warrants that it willrepair leaks in the FiberTite roofing system and/or defectiveworkmanship provided by Seaman or its authorizedFiberTite single-ply roof applicator.Material and workmanship; Seaman warrants that it willrepair leaks in the FiberTite roofing system and/or defectiveworkmanship provided by Seaman or its authorizedFiberTite single-ply roof applicator.Seaman warrants its FiberTite membrane materials to be inaccordance with its published specifications and free from materialdefects in components and workmanship that would affectperformance.5. Length of coverage 5 or 10 years 15 years 15 years6. Nature of remedy Seaman will repair leaks at its expense. Seaman will repair leaks at its expense. Seaman's obligation is limited to, at its option, allowance for credit,repair, or replacement of any material that may prove defectiveunder normal use and service. Seaman's liability is prorated suchthat Seaman's liability ranges from 100 percent if the defect occursin the first year to 5 percent if the defect occurs in the fifteenthyear.7. Monetary limitationsSeaman's obligation over the lifetime of warranty shall notexceed the original cost of the installed roof.Seaman's obligation over the lifetime of warranty shall notexceed the original cost of the installed roof.Seaman's prorated liability is based upon the original sales price.8. Notification requirementsWritten notice to Seaman Corporation, 1000 Venture Blvd.,Wooster, OH 44691, within 30 days after discovery of anyleaks in the roofing system.Written notice to Seaman Corporation, 1000 Venture Blvd.,Wooster, OH 44691, within 30 days after discovery of anyleaks in the roofing system.Written notification within 30 days of discovery of the allegeddefect to Seaman Corporation.9. Exclusive or additional remedy The owner's sole and exclusive remedy for failure of theroofing system; no employee or representative has authorityto make any representations other than those stated inwarranty; excludes UCC warranties.The owner's sole and exclusive remedy for failure of theroofing system; no employee or representative has authorityto make any representations other than those stated inwarranty; excludes UCC warranties.No other warranties applicable to material; corrections to nonconformitiesand defects as provided for in the warranty shallconstitute fulfillment of all liabilities of Seaman to the customer,whether based on contract, negligence, or otherwise. Should thefabric prove defective to the extent that it precludes the remedyingof warranted defects by repair or replacement, customer's sole andexclusive remedy shall be the refund of the purchase price of thefabric or the part thereof that is defective, upon its return toSeaman Corporation. No warranties or representations at anytime by any sales representative, dealer, agent, or any personshall be effective to vary or expand the warranty; excludes UCCwarranties.10. Inclusion of consequentialdamagesNoNoNo11. Determination of warrantyapplicabilitySeaman's good faith determination.Seaman's good faith determination.Seaman's determination12. Specific exclusions from coverage(see item 12 in Introduction)1, 3, 4, 5, 6, 7, 9, 10, 12, 18, 22, 24 1, 3, 4, 5, 6, 7, 9, 10, 12, 18, 22, 24 1, 3, 13, 16, 18, 20, 21, 2313. Wind coverage/exclusionsWarranty excludes hurricanes and tornadoes. Seamanindicates that warranty covers roof damage resulting fromwind speeds up to 73 mph.Warranty excludes hurricanes and tornadoes. Seamanindicates that warranty covers roof damage resulting fromwind speeds up to 73 mph.Warranty excludes hurricanes and tornadoes. Seaman indicatesthat warranty covers roof damage resulting from wind speeds up to73 mph.648

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F, G, I, J, M, N; the warranty also states that Seal-Dryhas no obligation under warranty unless Seal-Dry agents orauthorized installers are allowed access to roof to makeinspections and repairs during regular working hours.A, H. Warranty will also be void if any of the specificexclusions listed above occur or if material is exposed toΑexcessive pressures or sources,≅ external forces,radiation, harmful fumes or foreign substances in theatmosphere, or any use not specifically for roofingapplication.A, H. Warranty will also be void if any of the specific ex-clusionslisted above occur or if material is exposed to "excessivepressures or sources," external forces, radiat-ion, harmful fumes orforeign substances in the atmos-phere, or any use not specificallyfor roofing application.15. Cost to obtain $6.00/square None $2.00/square16. Minimum charge $650 None $25017. Ineligible structure or building useResidential single-dwelling homes eligible for membraneonly warranty.<strong>Roofing</strong> installations for personal, family, or householdpurposes.<strong>Roofing</strong> installations for personal, family, or household purposes.18. Pre-construction notice andapproval requirementsThe contractor to provide pre-installation notice withbuilding and job requirements and obtain approval prior tobeginning installation.Contractor must submit FiberTite Αrequest for warrantyform/roof award information material submittal data≅ andobtain approval before material can be shipped.Contractor must submit FiberTite Αrequest for warranty form/roofaward information material submittal data≅ and obtain approvalbefore material can be shipped.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Seal-Dry technical representative makes on-siteinspections prior to, during (when necessary), and afterapplication prior to issuance of warranty; two inspections nocharge.Seaman technical service representatives make on-siteinspections prior to, during (interim inspections coordinatedwith representative's travel schedule), and after completion,prior to issuance of warranty; no charge.Seaman technical service representatives make on-siteinspections prior to, during (interim inspections coordinated withrepresentative's travel schedule), and after completion, prior toissuance of warranty; no charge.21. Contractor’s post-installationobligationNoContractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor obligated to make repairs to workmanship deficienciesfor two years.22. Backed by named insurance orsuretyNo; Seal-Dry indicates that it does not carry insurancecovering its warranty obligations.No; Seaman indicates that it is self-insured.No; Seaman indicates that it is self-insured.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionSeal-Dry manufactures and sells the product. Seaman manufactures and sells the product. Seaman manufactures and sells the product.No renewal provision No renewal provision No renewal provision25. Assignability The warranty may be reissued to a subsequent purchaserfor the remainder of the term following an inspection andafter indicated repairs have been made at the owner'sexpense. An inspection fee and a warranty issuance feewill be charged. The warranty shall not extend beyond thewarranty period.No restrictions stated.No restrictions stated.26. Special features/conditions If Seal-Dry's investigation reveals that leaks are notcovered under warranty, the owner shall be responsible forthe cost of investigation and any repairs made by Seal-Dry.The warranty is governed by Arkansas law.No representative of Seal-Dry has any authority to bindSeal-Dry with any representation or warranty other thanstated in warranty.All purchase orders for FiberTite Membrane will be deemedsubmitted subject to and in accordance with SeamanCorporation standard terms and conditions of sale.All purchase orders for FiberTite Membrane will be deemedsubmitted subject to and in accordance with Seaman Corporationstandard terms and conditions of sale.27. Executed by owner Yes No No649

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Seaman Corporation Siplast, Inc. Siplast, Inc.2. Title, original publication date, andidentifying symbol, if anyΑWarranty for Commercial <strong>Roofing</strong>≅Siplast, Inc. ΑRoof Membrane Limited Warranty≅;October 15, 1987Siplast, Inc. Roof Membrane Guarantee; March 1, 19823. Product, specification, or systemcoveredFiberTite Single-Ply Roof Paratech Paradiene 20/30, Veral, Paradiene 40, Parafor 50 LT4. Scope of coverage Material and workmanship; Seaman warrants that it willrepair leaks in the FiberTite roofing systemand/or defective workmanship provided by Seamanor its authorized FiberTite single-ply roof applicator.Siplast warrants that the roof membrane shall remain inwatertight condition if roof membrane is installedaccording to Siplast specifications by an approved roofingcontractor and the use of Siplast materials has beenapproved in advance; unclear from the document itselfwhether warranty covers workmanship. [Siplast indicatesthat the workmanship of the contractor is covered.Siplast guarantees roof membrane shall remain in watertightcondition if roof membrane is installed according to Siplastspecifications by an approved roofing contractor and the use ofSiplast materials has been approved in advance; unclear from thedocument itself whether guarantee covers workmanship. [Siplastindicates that the workmanship of the contractor is covered.]5. Length of coverage 15 years 5 or 10 years10 years, with additional 5-year and 10-year extension optionsavailable6. Nature of remedy Seaman will repair leaks at its expense.Siplast shall repair the roof membrane at its own expense.(See Special Features/Conditions.)Siplast shall repair the roof membrane at its own expense. (SeeSpecial Features/Conditions.)7. Monetary limitations None stated. Siplast's liability for the cost of repairs shall not exceed inthe aggregate over the life of the warranty a sum greaterthan the owner's original cost of the Siplast-suppliedmaterials and the labor used to install such materials.None stated.8. Notification requirementsWritten notice to Seaman Corporation, 1000 VentureBlvd., Wooster, OH 44691, within 30 days after discoveryof any leaks in the roofing system.Written notice within 30 days after leak is discovered orshould by reasonable diligence have been discovered.Written notice within 30 days after leak is discovered orshould by reasonable diligence have been discovered.9. Exclusive or additional remedy The owner's sole and exclusive remedy for failure of theroofing system; no employee or representative hasauthority to make any representations other than thosestated in warranty; excludes UCC warranties.Owner's exclusive remedy against Siplast regarding theroof membrane; excludes all other warranties; excludesUCC warranties.Excludes other warranties; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)No No NoSeaman's good faith determination. Neutral (no provision) Neutral (no provision)1, 3, 4, 5, 6, 7, 9, 10, 12, 18, 22, 24 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 15, 23 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 15, 2313. Wind coverage/exclusionsWarranty excludes hurricanes and tornadoes. Seamanindicates that warranty covers roof damage resulting fromwind speeds up to 73 mph.Warranty excludes windstorms, hurricanes and tornadoes.Warranty excludes windstorms, hurricanes, and tornadoes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C C, H, R C, H, R15. Cost to obtain $7.00/square 5 years, $4.00/square; 10 years, $5.00/square None, if over 50 squares16. Minimum charge $750 $300 if less than 50 squares $300 if less than 50 squares650

17. Ineligible structure or building use<strong>Roofing</strong> installations for personal, family, or householdpurposes.Cold-storage buildings and buildings with high-interior--humidity problems.Cold-storage buildings and buildings with high-interior-humidityproblems.18. Pre-construction notice andapproval requirementsContractor must submit FiberTite Αrequest for warrantyform/roof award information material submittal data≅ andobtain approval before material can be shipped.A guarantee application form listing job conditions andrequirements must be submitted and approved by Siplasttechnical department prior to shipment of materials.A guarantee application form listing job conditions and requirementsmust be submitted and approved by Siplast technical departmentprior to shipment of materials.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policySeaman technical service representatives make on-siteinspections prior to, during (interim inspectionscoordinated with representative's travel schedule), andafter completion, prior to issuance of warranty; no charge.Inspections by Siplast field technical staff made prior andduring application periodically or as needed and afterapplication; no charge.Inspections by field technical staff prior to and during application asneeded, after application and two years after issuance of warranty; nocharge.21. Contractor’s post-installationobligationContractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor is obligated to make repairs to workmanshipdeficiencies for two years.Contractor is obligated to make repairs to workmanship deficienciesfor two years.22. Backed by named insurance orsuretyNo; Seaman indicates that it is self-insured.No; Siplast does not carry insurance covering its warrantyobligations.No; Siplast does not carry insurance covering its warranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionSeaman manufactures and sells the product. Siplast manufactures and sells product. Siplast manufactures and sells product.No renewal provision No renewal provision Siplast offers 5-year and 10-year addendum options to extend theroof membrane guarantee. In order to obtain either the 5-year or10-year extension, the owner must properly execute and return theSiplast Addendum to Roof Membrane Guarantee to Siplast prior toissuance of the original guarantee. In order for the option to becomeeffective, within six months prior to expiration of the originalguarantee, the owner shall notify the Siplast technical department, inwriting, to arrange for a free job inspection that will be made within 30days by Siplast. The owner is to have a Siplast-approved contractoreffect properly all maintenance and non-roof membrane-relatedrepairs deemed necessary by Siplast in accordance with Siplast'sinstructions and is to provide written verification that all suchmaintenance and repairs have been completed. Siplast will theninvoice the owner for the guarantee extension charge in effect at timeof extension. Current charges to extend the guarantee are $4.00-/square for a 5-year extension and $10.00/square for a 10-yearextension. Owner shall promptly pay to Siplast the renewal charges,after inspection and written verification that all main-tenance andrepairs have been completed in accordance with Siplast's instructionsand specifications.25. AssignabilityWarranty may be assignable to a subsequent owner, onlyif the original owner requests in writing that SeamanCorporation consent to an assignment to the purchaser ofthe building, which consent will not be unreasonablywithheld.No restrictions stated.No restrictions stated.26. Special features/conditions The owner will be responsible for the cost of investigationif any leak is determined not to be covered by warranty.27. Executed by owner YesWarranty provides that the expense of removing andreplacing traffic surfaces built over the roof shall be borneby the owner.NoGuarantee provides that the expense of removing and replacingtraffic surfaces built over the roof shall be borne by the owner.No651

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entitySiplast, Inc. Soprema, Inc.Southwestern Petroleum Corporation(SWEPCO)2. Title, original publication date, andidentifying symbol, if anyRoof System Guarantee September 1996Soprema, Inc. Limited Warranty For <strong>Roofing</strong> System;Jan. 1, 1997ΑSWEPCO Brand <strong>Roofing</strong> Products Limited Warranty≅; October1989; J-7433-08-90-BP3. Product, specification, or systemcoveredSiplast roof membrane, Siplast Zonolite, Insulperm, NVS,Insulcel and Zonocel roof insulation, and Zono-tite andNVS fastenersSopralene; 180, Flam 180, 180 Granules, Flam 180 Granules, 250,Flam 250, 250 Granules, Flam 250 Granules, 350, 350 Granules,Flam Stick, Flam 250 Alu, Flam 250 Copper, Jardin, Flam Antirock,Sopraseal; Elastophene; Flam, Granules, Flam Granules, PS, 180,180 PS, Flam Granules FR, Granules FR, Flam Stick, ColpheneGranules; Sopralast; Aluminum, Copper, Stainless, MammouthAluminum.Uni+Shield Single-Ply Roof System 302; Heavy Duty Cold ProcessBUR System 301; Uni+Shield II Cold Process BUR System 3034. Scope of coverageMaterial and workmanship; Siplast warrants that the roof system,comprised solely of the Siplast roof membrane, Siplast roofinsulation, and Zono-tite or NVS fasteners, will remain in awatertight condition. Siplast warrants that the actual resistance toheat flow through the roof insulation will be at least 80% of designthermal resistance provided that the roofing membrane ismaintained free of leaks; if leaks occur, the insulating performanceof the roof insulation will be at least 80% of design thermalresistance within a two-year period following repair of the leak; theroof insulation will remain in a reroofable condition should the roofmembrane require replacement. Damage to the roof insulationcaused by a fastener pull-out during removal of the old membraneis excluded; the roof insulation will not cause structural damage tothe building as a result of its expansion from thermal or chemicalaction. (See Special Features/Conditions.)Material and workmanship; Soprema warrants that theroofing membrane and flashing materials sold by Sopremawill remain in a watertight condition and that the roofingsystem is free from defects in material and installation atthe time of application and that the materials in the roofingsystem conform to Soprema's specifications.Material only; SWEPCO warrants that it will furnish sufficient roofingmaterial to correct any roof leaks that occur in warrantedapplications solely as a result of a proven product defect. SWEPCOdoes not warrant that products will resist the effects of normal agingfor the entire warranty period.5. Length of coverage 10 years: all systems; 15 and 20 years available forParadiene 20/30 and Veral systems10, 15, or 20 yearsUni+Shield: 5 years without extended-life coating option; Uni+Shield:12 years with extended-life coating option; PolyShield: 8 yearswithout extended life coating option; PolyShield: 12 years with extended-lifecoating option6. Nature of remedyIf the roof systems does not remain in a watertight condition,Siplast will repair the roof system at its own expense. If the roofinsulation fails to perform as guaranteed, Siplast shall, at its ownexpense, make or cause to be made repair or modifications to theroof insulation as Siplast deems appropriate so as to enable theroof insulation to perform as guaranteed. Siplast will be liable onlyfor the cost of repair of the roof system by a Siplast approvedcontractor. The expense of removing and replacing traffic surfacesbuilt over the roof shall be borne by owner.Soprema will make repairs necessary to correct leaks inthe roof membrane and flashing at its own expense,including all labor and materials, resulting from defects inmaterial and faulty or improper installation in the roofingsystem or the failure of materials to meet Sopremaspecifications.Replacement material only; SWEPCO will furnish materials requiredto repair leaks. Value of materials calculated at list prices current atthe time of claim; under no circumstances are cash payments made.7. Monetary limitations None stated. None stated.Maximum aggregate value of replacement SWEPCO-brand roofingproducts recoverable over the life of the warranty shall not exceedthe original invoiced price for warranted SWEPCO-brand roofingproducts.8. Notification requirements Written notice within 30 days after leak is discovered orshould by reasonable diligence have been discovered.9. Exclusive or additional remedy The owner's exclusive remedy against Siplast with respectto the roof system; owner waives any and all other claims,actions, and demands relating to roof system; excludes allother guarantees; excludes UCC warranties.Written notification within 30 days after any defect or leak isdiscovered or in the exercise of ordinary care should have beendiscovered to Soprema, Inc. at 310 Quadral Drive, Wadsworth, OH44281.Warranty is sole and exclusive remedy against Soprema; ex-cludesall other warranties; Soprema not liable for special, in-cidental orconsequential damages of any kind, whether arising from breach ofcontract, negligence, breach of warranty or any other legal theoryincluding loss of use of building or equipment, cost of capital, costof substitute equipment, facilities or services, lost profits, downtimecosts, or claims of customers.Owner shall notify SWEPCO promptly and provide writtenconfirmation by registered mail to SWEPCO at P.O. Box 961005, Ft.Worth, TX 76161-0005, within 14 days of discovery of any leaks.Owner accepts warranty as its sole and exclusive remedy; ownerexpressly waives any and all other claims; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoNeutral Neutral (no provision) SWEPCO's determination652

12. Specific exclusions from coverage(see item 12 in Introduction)13. Wind coverage/exclusions1, 2, 3, 4, 5, 6, 8, 9, 11, 12, 15, 23. Guarantee alsospecifically excludes chemical or organic deposits or otherunusual occurrences.Siplast indicates guarantee covers roof damage resulting fromwinds, but does not indicate covered wind speed. Guaranteeexcludes windstorms, hurricanes, and tornadoes. (Beaufortscale defines storm as winds between 55 and 63 mph.)1, 2, 3, 4, 5, 6, 7, 9, 10, 12, 13 (including exposure to chloroflurocarbons,solvents, hydrocarbons, gasoline, acids, corrosives,salts, turpentine, oil, fat, grease, smoke, or fumes), 16, 17, 20, 23.Warranty also excludes damage due to insect in-festation, rodents,and vermin.Warranty excludes windstorms in excess of Beaufort Number 8of the Beaufort Scale, hurricanes, and tornadoes. Warrantycovers roof damage resulting from wind speeds up to 46 mph.6531, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 15, 16, 17, 19, 20, 22, 23Warranty excludes windstorms, gales, hurricanes, and tornadoes.[SWEPCO indicates that it does not have a definition of windstorm basedupon wind speed.]14. Specific conditions to makeA, B, C, F (including keeping all drains unclogged and properly A, B, C, G, H, M. Also failure to promptly apply replacementwarranty ineffective or null and C, H, Rworking at all times, preventing excessive traffic across the roofproducts provided under warranty or provide written verification ofand maintaining pitch pans and flashings in a watertight condition),void (see item 14 in Introduction)H, N, Rapplication will automatically terminate warranty.15. Cost to obtain 10 yrs: no charge; 15 yrs: $7.50/sq; 20 yrs: $12.50/sq 10 yrs: no charge; 15 yrs: $7.50/sq; 20 yrs: $12.50/square None16. Minimum charge $300 if less than 50 squares, plus normal per-square charge None None17. Ineligible structure or building use Cold-storage buildings and buildings with high humidity problems None None18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsA guarantee application form listing job conditions andrequirements must be submitted and approved by Siplast technicaldepartment prior to shipment of materials.Yes; the roofing contractor and lightweight concrete applicator mustbe approved and licensed by Siplast.20. Job inspection policy Siplast field technical staff makes inspections prior to, during, andafter application prior to issuance of guarantee as well as two yearsafter issuance of guarantee; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextension25. Assignability26. Special features/conditionsThe contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; Siplast does not carry insurance covering its warrantyobligations.Soprema requires a pre-bid approval from the specifier and contractor.Once received and approved, the respective parties receiveapproval notification. (All approvals are registered with thehome office).YesSoprema-authorized representative makes on-site inspectionsprior, during (depending on the circumstances), and after applicationprior to issuance of warranty, as well as two years after issuanceof warranty; no charge.Contractor obligated to make repairs to workmanshipdeficiencies for two years.No; Soprema indicates that it does not carry insurancecovering its warranty obligations.NoneNoNo on-site inspectionsNone; material-only warrantySiplast manufactures and sells the products. Soprema manufactures and sells product. SWEPCO manufactures and sells PolyShield product; SWEPCOsells Uni+Shield product only.Siplast offers 5- and 10-year options to extend the roof systemguarantee. In order to obtain either the 5- or 10-year extension,the owner must properly execute and return the Siplast addendumto roof system guarantee to Siplast prior to issuance of the originalguarantee. In order for the option to become effective, within sixmonths prior to expiration of the original guarantee, the owner shallnotify the Siplast technical department, in writing, to arrange for afree job inspection that will be made within 30 days by Siplast. Theowner is to have a Siplast-approved contractor effect properly allmaintenance and non-roof membrane-related repairs deemednecessary by Siplast in accordance with Siplast's instructions andis to provide written verification that all such maintenance andrepairs have been completed. Siplast will then invoice the ownerfor the guarantee extension charge in effect at time of extension.Current charges to extend the guarantee are $4.00/square for a 5-year extension and $10.00/square for a 10-year extension. Theowner shall promptly pay Siplast the renewal charges, afterinspection and written verification that all maintenance and repairshave been completed in accordance with Siplast's instructions andspecifications.The guarantee is assignable if Siplast is given at least 30 dayswritten notice prior to transfer and the intended building use isstated; an inspection of the roof/roof insulation system is made bySiplast; any repairs to the roof/roof insulation system that may bedeemed necessary by Siplast are made at the owner's expense;and, the inspection and processing fee ($300) is paid to Siplast.No claim may be made with respect to thermal performance ofSiplast roof insulation unless based on tests carried out at owner'sexpense by a qualified laboratory using tests and proceduressatisfactory to Siplast. Siplast reserves the right to perform thermaltesting of the roof insulation to be carried out at Siplast's directionand expense.27. Executed by owner No NoNo renewal provisionWarranty extends only to original owner and is nottransferable or assignable without prior written consent ofSoprema. If repairs are required, expense of removingand replacing traffic surfaces or other structures built overthe roof shall be borne by owner.Any product sold by Soprema and not manufactured by Soprema issold "as is" and without any warranty. Soprema dis-claims anyliability or responsibility for specifications, design,or construction of any portion of the building, including the roofingsystem, except as stated in warranty. Warranty shallbe construed according to laws of Ohio.NoUni+Shield 12-year warranty (with extended-life coating option) maybe extended to 20 years. Extension is contingent upon satisfactoryinspection and recoating with the original coating at the end of the12-year term.Any transfer of warranty to subsequent owners, purchasers, ortenants must be approved in writing by SWEPCO vice president ofcustomer service.Any replacement products due under warranty will be made FOBSWEPCO's principal place of business or nearest warehouse.No; however, SWEPCO's order form, incorporating the warranty,requires buyer's signature

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Tamko <strong>Roofing</strong> Products, Inc. Tamko <strong>Roofing</strong> Products, Inc. Tamko <strong>Roofing</strong> Products, Inc2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredTam-Ply IV Guarantee (A Limited Warranty); 12/97997296, JP21925Versa-Cap FR Labor and Material Guarantee (A LimitedWarranty);” March 1, 1997; 997297Tam-Ply IV Versa-Cap FR, Specification Series 700 Speedweld APP4. Scope of coverage Material only; Tamko warrants that the Tam-Ply IV is freefrom manufacturing defects which result in leaks5. Length of coverage 10 years6. Nature of remedy If manufacturing defects result in leaks, Tamko shall have 90 daysafter receipt of notification to pay the reasonable cost for labor andmaterial necessary to make or cause to be made repairs orreplacement of the Tamko product or to pay the reasonable costthereof (exclusive of non-Tamko flashing and metal work andmaterials used as a roof base over which the Tam-Ply IV is appliedand repairs required by defects therein) as required to preventleaks in the roof resulting from manufacturing defects.7. Monetary limitations Tamko=s maximum liability shall be limited to repair andreplacement of Tamko materials up to a maximum liability over theterm of the warranty of $60 for each installed roofing square for thefirst five years. Tamko=s liability is reduced by 20% each yearfollowing the initial five years of that portion of the Tam-Ply IVcontaining a manufacturing defect which has resulted in leaks.8. Notification requirements Written notification by certified mail to Tamko at P. O. Box 1404,Joplin, MO 64802, within 30 days following discovery of any leaksalleged to result directly from manufacturing defects9. Exclusive or additional remedy Guarantee is in lieu of any other obligations, guarantees,warranties, or liabilities on the part of Tamko; excludes UCCwarranties. No representative, employee, agent of Tamko, orany person other than the President of Tamko, has anyauthority to assume for Tamko any additional or other liabilityor responsibility.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)NoMaterial only; Tamko warrants that the Versa-Cap FR isfree from manufacturing defects that result in leaks.10 yearsIf manufacturing defects result in leaks, Tamko shall have 90 daysafter receipt of notification to make repairs or cause repairs orreplacement of the Versa-Cap FR to be made (exclusive of non-Tamko flashing and metal work and materials used as a roof baseover which the Versa-Cap FR is applied and repairs required bydefects therein) as required to prevent leaks in the roof resultingfrom manufacturing defects.Tamko’s maximum liability shall be limited to repair andreplacement of Tamko materials up to a maximum liability over theterm of the warranty of $100 per square for the first five years,reduced by 20 percent for each year following the initial five yearsof the warranty of that portion of the Versa-Cap FR containing amanufacturing defect which has resulted in leaks.Written notification by certified mail to result directly frommanufacturing Tamko at P.O. Box 1404, Joplin, MO 64802 within30 days following discovery of any leaks alleged to defects.Guarantee is in lieu of any other obligations, guarantees,warranties, or liabilities on the part of Tamko; excludesUCC warranties.NoTamko=s determination. Tamko’s determination Tamko's determination1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including exposure froma aliphatic or aromatic solvents, chlorinated hydrocarbons,turpentine, oils, organic or inorganic polar materials, andexposure to ionized radiation or contamination by radioactivityfrom any nuclear source), 15, 19, 20, 22, 2313. Wind coverage/exclusions Tamko indicates warranty covers roof damage resultingfrom wind speeds up to strong gales. Warranty excludesstrong gales, windstorms, violent storms, hurricanes, andtornadoes. (Strong gales are defined on the BeaufortScale as winds between 47-54 mph).14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)K1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including exposure fromaliphatic or aromatic solvents, chlorinated hydrocarbons,turpentine, oils, organic or inorganic polar materials, andexposure to ionized radiation or contamination by radioactivityfrom any nuclear source), 15, 19, 20, 22, 23Tamko indicates warranty covers roof damage resultingfrom wind speeds up to 54 mph. Warranty excludesstrong gales, windstorms, violent storms, hurricanes andtornadoes.KΑTwelve Year Limited Material Warranty (A Limited Warranty)≅;January 1996; JP32995 997572Material only; Tamko warrants to the first consumer purchaser or ownerthat the Tamko product will, at the time of purchase, be free frommanufacturing defects that result in leaks.12 yearsIf Tamko determines there are manufacturing defects covered by the warranty, Tamkoshall have 90 days after receipt of notification to either (1) refund the lesser of: (a) thecost of repairs to the roofing membrane to restore its watertight integrity, or (b) theprorated portion of the purchase price of the product; or (2) replace a portion of theproduct, based upon a prorating schedule ranging from 100% in years one and two to10% in year ten. Prior to the expiration of such 90-day period, Tamko shall not beliable for any cost of repair or replacement unless Tamko has given its written approvalof the repair or replacement of defective product and the cost thereof.For first and second year, Tamko's liability limited to the amount of original purchaseprice; 90% in year three; 70% in year four; 60% in year five; 50% in year six; 40% inyear seven; 30% in year eight; 20% in year nine; and 10% in year ten.Written notice by certified mail of any leaks alleged to result directly from manufacturingdefects within 30 days following discovery to Tamko, P.O. Box 1404, Joplin, MO64802The warranty is expressly in lieu of any and all other obligations, guarantees andwarranties; Tamko's obligation to refund the cost of repair, a portion of the product'soriginal purchase cost or to replace a portion of the product, in accordance with theprorating schedule, shall be the sole and exclusive remedy against Tamko under thewarranty or otherwise; excludes UCC warranties.No1, 2, 3, 4, 6, 7, 8, 11, 12, 13 (including exposure from aliphatic or aromaticsolvents, chlorinated hydrocarbons, turpentine, oils, organic or inorganic polarmaterials, and exposure to ionized radiation or contamination by radioactivityfrom any nuclear source), 15, 19, 23. The warranty excludes damage due tosplitting, cracking, blistering, delamination, or separation due to underlyingmaterials.The warranty excludes strong gales, windstorms, violent storms,hurricanes, and tornadoes. (Tamko does not indicate what windspeeds are covered by the warranty; the Beaufort Scale defines astrong gale as winds between 47 and 54 mph.)C, G, K, R, (The warranty states that Tamko's obligations under the warranty shallterminate if (1) Tamko is not reimbursed for all reasonable expenses, including, but notlimited to, transportation, meals and lodging, associated with the inspection of acomplaint, within 30 days of receipt of invoice from Tamko when Tamko hasdetermined that the complaint is expressly excluded by the terms of the warranty; or (2)the owner fails to reimburse Tamko for any additional costs incurred by Tamkoattributable to the lack of reasonable access to the roof within 30 days of receipt ofinvoice from Tamko.15. Cost to obtain None None None16. Minimum charge None None None654

17. Ineligible structure or building use None Cold-storage facilities, individual residences,condominiums, cooperative apartments, heated tanks,storage silos, dry kilns, car wash buildings, swimmingpools, other structures with high-humidity conditions.Individual residences, condominiums, cooperative apartments,heated tanks, storage silos, dry kilns, car wash buildings, swimmingpools, and other structures with high-humidity conditions.18. Pre-construction notice andapproval requirementsNoneNoneNone required.19. Approved, authorized, or licensedrequirementsNoNoNo20. Job inspection policy No on-site inspecitons No on-site inspections No on-site inspections21. Contractor’s post-installationobligationNone; material-only warranty None; material only warranty None; material-only warranty22. Backed by named insurance orsuretyNo; Tamko indicates that it does not carry insurancecovering its warranty obligations.No; Tamko indicates that it does not carry insurancecovering its warranty obligations.No; Tamko indicates that it does not carry insurance covering itswarranty obligations.23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionTamko manufacturers and sells the products Tamko manufacturers and sells the product. Tamko manufactures and sells the product.No renewal provision No renewal provision No renewal provision25. Assignability Guarantee cannot be assigned, sold or transferred in anymanner whatsoever. Warranty isnures only to the benefitof the building owner of the Tamko product.26. Special features/conditions Tamko requires that the owner initiate andfollow a preventative maintenance program substantially inaccordance with recommendations found on the reverseside of warranty. Specific maintenance items listed onreverse of guarantee must be performed at leastsemiannually to maintain guarantee coverage. Coatingsover smooth surfaced products must be maintained toprovide surface protection. Tamko is not responsible forany cost related to the removal or abatement of anyasbestos present in the existing roof to which the Tam-PlyIV is applied.No action for breach of warranty shall be brought later thanone year after any cause of action has accrued.Warranty is not valid in Hawaii, Alaska and California. Aseparate limited warranty is available for products used inCalifornia. Products are sold ΑAS IS≅ and ΑWITH ALLFAULTS≅ when used outside of the 48 contiguous UnitedStates.Not transferable or assignable in any manner; warrantyaccrues and inures only to the benefit of the first consumerpurchaser or owner.Tamko is not responsible for any cost related to theremoval or abatement of any asbestos present in theexisting roof to which the Versa-Cap FR is applied. Tamkorequires that the owner initiate and follow a preventivemaintenance program substantially in accordance with thepreventive recommendations found on the reverse side ofwarranty. Specific maintenance items listed on reverse ofguarantee must be performed at least semiannually tomaintain guarantee coverage. Coatings over smoothsurfaced products must be maintained to provide surfaceprotection.Warranty may not be modified except in a writing signedby Tamko’s president. No representative, employee,agent of Tamko or any person, other than the president ofTamko, has any authority to assume for Tamko anyadditional or other liability or responsibility.Warranty is not valid in Hawaii, Alaska and California. Aseparate limited warranty is available for products used inCalifornia. Products are sold “as is” and “with all faults”when used outside of the 48 contiguous United States.No action for breach of this limited warranty shall bebrought later than one year after any cause of action hasaccrued.The warranty shall accrue and inure only to the benefit of the firstconsumer purchaser or owner of the Tamko product and shall not beassigned, sold, or transferred in any manner whatsoever. Anyassignment, sale or transfer of the warranty or of the building to which theproduct is applied shall void all warranties.Claims under warranty will require proof of purchase by firstconsumer purchaser or owner. Tamko shall not be responsible forany claims without such proof of purchase.The warranty states that owner acknowledges that it is the owner'ssole responsibility to determine that the product has been installed incompliance with (i) any contract specifications provided by the ownerto the contractor and (ii) the terms and conditions of warranty.The warranty may not be modified except in a writing signed byTamko's president. No representative, employee, agent of Tamkoor any person, other than the president of Tamko, has any authorityto assume for Tamko any additional or other liability or responsibility.Warranty is not valid in Hawaii, Alaska and California. A separatelimited warranty is available for products used in California.Products are sold "as is" and "with all faults" when used outside ofthe 48 contiguous United States.No action for breach of this limited warranty shall be brought laterthan one year after any cause of action has accrued.See item 14 above.27. Executed by owner NoRoof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)NoYes; owner is to sign and retain warranty with the contractor's receiptfor future reference.1. Identity of issuing entity Tamko <strong>Roofing</strong> Products, Inc. Tamko <strong>Roofing</strong> Products, Inc. Tamko <strong>Roofing</strong> Products, Inc.655

2. Title, original publication date, andidentifying symbol, if anyΑPremium <strong>Roofing</strong> System NDL Guarantee (A LimitedWarranty)≅; February 1995; JP22255 997226Α<strong>Roofing</strong> Systems Guarantee (A Limited Warranty)≅;February 1995; 997225ΑCommercial <strong>Roofing</strong> Guarantee (A Limited Warranty);≅ 7/98997295, JP19263. Product, specification, or systemcoveredBUR specifications 503, 507; modified bitumenspecifications 103, 108, 109, 103 HW, 108 HW, 109 HW,103 FR, 108 FR, 109 FR. Base flashings must usePremium Grade Awaplan.BUR specification 500 series, 600 series; modifiedbitumen specification 100, 100 FR, 100 HW, 100C, 200,200 FR, 200C, 700 series. This guarantee is intended forrecover systems over existing roofs and certain otherTamko specifications.Awaplan Premium FR, Awaplan Premium, Awaplan Heat Welding,Awaplan 170 FR, Awaplan 170, Awaplan Versa-Smooth, AwaflexFR, Awaflex, Awaplan Versa Flex, Versa-Flash 160, Tam-GlassPremium, Vapor-Chan, Glass-Base Sheet, Base-N-Ply, Versa-Base4. Scope of coverageMaterial and workmanship; Tamko agrees to provide roofrepair services for leaks in the roofing system (exclusive ofmetal work and non-Tamko-approved flashings)attributable to ordinary wear and tear of the roofing systemor workmanship deficiencies in application to the extentnecessary to return the roofing system to a watertightcondition.Material and workmanship; Tamko agrees to provide roofrepair services for leaks in the roof system (exclusive ofmetal work and non-Tamko-approved flashings)attributable to ordinary wear and tear of the roofing systemor workmanship deficiencies in application to the extentnecessary to return the roofing system to a watertightcondition.Material only; Tamko warrants that its product is free frommanufacturing defects that result in leaks.5. Length of coverage 20 years 5, 10, 12, or 15 years6. Nature of remedy7. Monetary limitations None stated.Tamko will arrange for repair to the roofing membrane andbase flashing. Tamko shall have no more than 90 daysafter receipt of notification of leaks to make or cause to bemade repairs or replacement unless otherwise preventedby acts of God. Prior to the expiration of such 90-dayperiod, Tamko will not be liable for any cost of repair orreplacement unless Tamko has given its written approval.8. Notification requirements Written notice to Tamko no later than 30 days afterdiscovery of any leaks.9. Exclusive or additional remedy The guarantee is in lieu of any other obligations,guarantees, warranties, or liability on the part of Tamko;excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)Tamko will arrange for repair to the roofing membrane andbase flashing. Tamko shall have no more than 90 daysafter receipt of notification of leaks to make or cause to bemade repairs or replacement unless otherwise preventedby acts of God. Prior to the expiration of such 90-dayperiod, Tamko will not be liable for any cost of repair orreplacement unless Tamko has given its written approval.Tamko inserts maximum total liability in guarantee formprior to issuance. Tamko indicates $100/square is theusual limitation inserted by Tamko at the time of issuanceof guarantee.Written notice to Tamko no later than 30 days afterdiscovery of any leaks.The guarantee is in lieu of any other obligations,guarantees, warranties, or liability on the part of Tamko;excludes UCC warranties.No No NoTamko will solely determine the condition of watertightness.1, 2, 3, 4, 6, 7, 8, 11, 12, 13 (including exposure fromaliphatic or aromatic solvents, chlorinated hydrocarbons,turpentine, oils or organic or inorganic polar materials, andexposure to ionized radiation or contamination by radioactivityfrom any nuclear source), 15, 18, 20, 23Tamko will solely determine the condition of watertightness.1, 2, 3, 4, 6, 7, 8, 11, 12, 13 (including exposure fromaliphatic or aromatic solvents, chlorinated hydrocarbons,turpentine, oils or organic or inorganic polar materials, andexposure to ionized radiation or contamination by radioactivityfrom any nuclear source), 15, 18, 20, 23.5 years: Versa-Base, Base-N-Ply, Glass-Base Sheet, Vapor-Chan10 years: Tam-Glass Premium, Versa-Flash 160, Awaplan Versa Flex, Awaflex,Awaflex FR12 years: Awaplan Versa-Smooth, Awaplan 170, Awaplan 170 FR15 years: Awaplan Heat Welding, Awaplan Premium, Awaplan Premium FRIf manufacturing defects result in leaks, Tamko shall have 90 daysafter receipt of notification to pay the reasonable cost for labor andmaterial necessary to make repairs or to replace the Tamko product(exclusive of non-Tamko flashing and metal work and materialsused as a roof base over which the Tamko product is applied andrepairs required by defects therein) as required to prevent leaks inthe roof resulting from manufacturing defects.Tamko's maximum liability shall be limited to repair and replacementor to pay the reasonable costs thereof of that portion of the Tamkoproduct containing a manufacturing defect that has resulted in leaks.Written notice by certified mail to Tamko at P.O. Box 1404, Joplin, MO64802, within 30 days following discovery of any leaks alleged to resultdirectly from manufacturing defects.Guarantee is in lieu of any other obligations, guarantees, warranties, or liability on thepart of Tamko; excludes UCC warranties. Warranty may not be modified except in awriting signed by Tamko=s President. No representative, employee, agent of Tamko,or any person other than the President of Tamko, has any authority to assume forTamko any additional or other liability or responsibility.Tamko's determination1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (including exposure fromaliphatic or aromatic solvents, chlorinated hydrocarbons, turpentine,oils, organic or inorganic polar materials, and exposure to ionizedradiation or contamination by radioactivity from any nuclear source),15, 19, 20, 22, 23.13. Wind coverage/exclusions The warranty excludes strong gales, windstorms, violentstorms, hurricanes, and tornadoes. (Tamko does notindicate what wind speeds are covered by guarantee.Strong gales are defined on the Beaufort Scale as stormswith winds between 55-63 mph and storms as havingwinds between 47 and 54 mph.)The warranty excludes strong gales, windstorms, violentstorms, hurricanes and tornadoes. Tamko does notindicate wind speeds covered by guarantee.Tamko indicates warranty covers roof damage resulting from windspeeds up to strong gales. Warranty excludes strong gales,windstorms, violent storms, hurricanes, and tornadoes. (Stronggales are defined on the Beaufort Scale as winds between 47 and54 mph.)656

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B, C, F, K B (Tamko may, at its option, cancel the guarantee), C K15. Cost to obtain $17.50/square 5 years: $4.00/square; 10 years: $8.50/square;12 years: $9.00/square; 15 years: $12.50/squareNone16. Minimum charge $1,200 5 yrs: $400; 10 yrs: $850; 12 yrs: $850; 15 yrs: $1,000 None17. Ineligible structure or building use Individual residences, condominiums, cooperativeapartments, heated tanks, storage silos, dry kilns, carwash buildings, swimming pools, and other structures withhigh-humidity conditions.Individual residences, condominiums, cooperativeapartments, heated tanks, storage silos, dry kilns, carwash buildings, swimming pools, and other structures withhigh-humidity conditions.None18. Pre-construction notice andapproval requirementsThe contractor is required to submit a request for issuanceof guarantee describing the job at least two weeks prior tothe commencement of the job. Job specifications must bein accordance with Tamko's published specifications andrecommendations unless changes are approved in writingby Tamko's manager of technical services.The contractor is required to submit a request for issuanceof guarantee describing the job at least two weeks prior tothe commencement of the job. Job specifications must bein accordance with Tamko's published specifications andrecommendations unless changes are approved in writingby Tamko's manager of technical services.No19. Approved, authorized, or licensedrequirementsYes Yes No20. Job inspection policyTamko representative makes inspection after completionprior to issuance of guarantee and two years after issuingof guarantee. Tamko representative makes on-siteinspection during application of specification 243 only; nocharge.Tamko built-up roofing representative makes inspectionafter completion prior to issuance of guarantee and twoyears after issuing of guarantee. Tamkorepresentativemakes on-site inspection during applicationfor specification 243 only; no charge.No on-site inspections.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs toworkmanship deficiencies for two years.The contractor is obligated to make repairs toworkmanship deficiencies for two years.None; material-only warranty22. Backed by named insurance orsuretyNo; Tamko indicates that it does not carry insurancecovering its warranty obligations.No; Tamko indicates that it does not carry insurancecovering its warranty obligations.No; Tamko indicates that it does not carry insurance covering itswarranty obligations23. Issuing entity manufactures and/orsells productsTamko <strong>Roofing</strong> Products, Inc. manufactures and sells theproducts.Tamko <strong>Roofing</strong> Products, Inc. manufactures and sellsproduct.Tamko manufactures and sells the products.24. Conditions for renewal orextensionNo renewal provision No renewal provision No renewal provision25. Assignability The guarantee cannot be assigned, sold, or transferred inany manner whatsoever. The warranty inures only to thebenefit of the first consumer, purchaser, or owner of theTamko product.Not transferable in any manner.Guarantee cannot be assigned, sold or transferred in any mannerwhatsoever. Warranty insures only to the benefit of the buildingowner of the Tamko product.26. Special features/conditionsTamko is not responsible for cost related to the removal orabatement of any asbestos present in the existing roofsystem to which Tamko roof system is applied.No action for breach of warranty shall be brought laterthan one year after any cause of action has occurred.Nothing contained in the guarantee shall be construed tobe a waiver of Tamko's right for contribution or indemnity.No representative, employee, agent of Tamko, or anyother person has any authority to assume for Tamko anyadditional or other liability or responsibility.Tamko is not responsible for cost related to the removal orabatement of any asbestos present in the existing roofsystem to which Tamko roof system is applied.No action for breach of warranty shall bebrought later than one year after any cause of action hasoccurred. Nothing contained in the guarantee shall beconstrued to be a waiver of Tamko's right for contributionor indemnity.No representative, employee, agent of Tamko, or anyother person has any authority to assume for Tamko anyadditional or other liability or responsibility.27. Executed by owner No No NoTamko requires that the owner initiate and follow a preventive maintenanceprogram substantially in accordance with the recommendations found on thereverse side of warranty. Specific maintenance items listed on reverse ofguarantee must be performed at least semiannually to maintain guaranteecoverage. Coatings over smooth-surfaced products must be maintained toprovide surface protection. Tamko is not responsible for any cost related to theremoval or abatement of any asbestos present in the existing roof to which theTamko product is applied.No action for breach of warranty shall be brought later than one year afterany cause of action has accrued.Warranty is not valid in Hawaii, Alaska and California. A separate limitedwarranty is available for products used in California. Products are sold ΑASIS≅ and ΑWITH ALL FAULTS≅ when used outside of the 48 contiguous UnitedStates.657

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Tamko <strong>Roofing</strong> Products, Inc. Tamko <strong>Roofing</strong> Products, Inc Tamko <strong>Roofing</strong> Products, Inc2. Title, original publication date, andidentifying symbol, if anyTotal System Coverage Guarantee (A Limited Warranty);February 1995; JP22287 997227Ten Year Limited Material Warranty (A Limited Warranty)January 1996; JP32996 997574<strong>Roofing</strong> System NDL Guarantee (A Limited Warranty); February1995; JP22254 9972283. Product, specification, or systemcoveredBuilt-up roofing specifications: All insulated specifications in400, 500 and 600 series; modified bitumen specifications:All insulated specifications in series 100, 200, 700 and 1000Speedweld (Smooth)Built-up roofing specifications: 400 Series, 500 Series, 600Series; modified bitumen specifications: 100, 100 FR, 100 HW,100 C, 200, 200 FR, 200 C, 700 and 1000 Series4. Scope of coverage Material and workmanship; Tamko agrees to provide roofrepair services for leaks in the roofing system (e.g.,membrane exclusive of metal work and non-Tamkoapproved flashings) attributable to ordinary wear and tear ofthe roofing system or workmanship deficiencies inapplication to the extent necessary to return the roofingsystem to a watertight condition.Material only; Tamko warrants to the first consumerpurchaser or owner that the Tamko product will, at the timeof purchase, be free from manufacturing defects that resultin leaks.Material and workmanship; Tamko agrees to provide roof repairservices for leaks in the roofing system (e.g., membraneexclusive of metal work and non-Tamko approved flashings)attributable to ordinary wear and tear of the roofing system orworkmanship deficiencies in application to the extent necessaryto return the roofing system to a watertight condition.5. Length of coverage 5, 10, 12, 15, or 20 years 10 years 5, 10, 12, or 15 years6. Nature of remedy Tamko will arrange for repairs to the roofing membrane andbase flashing and shall have no more than 90 days afterreceipt of notification of leaks to make or cause to be maderepairs or replacements unless prevented by acts of God.7. Monetary limitations None stated.8. Notification requirements Written notice to Tamko, P.O. Box 1404, Joplin, Missouri,64802, no later than 30 days after discovery of a leak fromany cause.9. Exclusive or additional remedy The obligation contained in guarantee is expressly in lieu ofany other guarantees, obligations or liability on the part ofTamko; excludes UCC warranties.If Tamko determines there are manufacturing defects covered by thewarranty, Tamko shall have 90 days after receipt of notification toeither (1) refund the lesser of: (a) the cost of repairs to the roofingmembrane to restore its watertight integrity, or (b) the proratedportion of the purchase price of the product; or (2) replace a portionof the product, based upon a prorating schedule ranging from 100%in years one and two to 10% in year ten. Prior to the expiration ofsuch 90-day period, Tamko shall not be liable for any cost of repair orreplacement unless Tamko has given its written approval of therepair or replacement of defective product and the cost thereof.For first and second year, Tamko's liability limited to the amount oforiginal purchase price; 90% in year three; 70% in year four; 60% inyear five; 50% in year six; 40% in year seven; 30% in year eight; 20%in year nine; and 10% in year ten.Written notice by certified mail of any leaks alleged to result directlyfrom manufacturing defects within 30 days following discovery toTamko, P.O. Box 1404, Joplin, MO 64802.The warranty is expressly in lieu of any and all other obligations,guarantees and warranties; Tamko's obligation to refund the cost ofrepair, a portion of the product's original purchase cost or to replacea portion of the product, in accordance with the prorating schedule,shall be the sole and exclusive remedy against Tamko under thewarranty or otherwise; excludes UCC warranties.Tamko will arrange for repairs to the roofing membrane and baseflashing and shall have no more than 90 days after receipt ofnotification of leaks to make or cause to be made repairs orreplacements unless prevented by acts of God.None stated.Written notice to Tamko, P.O. Box 1404, Joplin, Missouri, 64802,no later than 30 days after discovery of a leak from any cause.The obligation contained in guarantee is expressly in lieu of anyother guarantees, warranties, obligations, or liability on the partof Tamko; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoSolely Tamko will determine the condition of watertightness. Tamko's determination. Solely Tamko will determine the condition of watertightness.12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 6, 7, 8, 11, 12, 13, 15, 23, 24; exposure to ionizedradiation or contamination by radioactivity from any nuclearsource1, 2, 3, 4, 6, 7, 8, 11, 12, 13 (including exposure from aliphatic oraromatic solvents, chlorinated hydrocarbons, turpentine, oils, organicor inorganic polar materials, and exposure to ionized radiation orcontamination by radioactivity from any nuclear source), 15, 19, 23.The warranty excludes damage due to splitting, cracking, blistering,delamination, or separation due to underlying materials.1, 2, 3, 4, 6, 7, 8, 11, 12, 13, 15, 23, 24; exposure to ionizedradiation or contamination by radioactivity from any nuclearsource.13. Wind coverage/exclusions The warranty excludes strong gales, windstorms, hurricanes,tornadoes and violent storms. (Strong gales are defined onthe Beaufort Scale as storms with winds between 47 and 54mph and storms are defined as winds between 55 and 63mph.)The warranty excludes strong gales, windstorms, violent storms,hurricanes, and tornadoes. (Tamko does not indicate what windspeeds are covered by the warranty; the Beaufort Scale definesa strong gale as winds between 47 and 54 mph.)The warranty excludes strong gales, windstorms, hurricanes,tornadoes and violent storms. (Strong gales are defined on theBeaufort Scale as winds between 47 and 54 mph and storms aredefined as winds between 55 and 63 mph.)658

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)A, B, C, F, K, N C, G, K, R, (The warranty states that Tamko's obligations under the warrantyshall terminate if (1) Tamko is not reimbursed for all reasonable expenses,including, but not limited to, transportation, meals and lodging, associatedwith the inspection of a complaint, within 30 days of receipt of invoice fromTamko when Tamko has determined that the complaint is expressly excludedby the terms of the warranty; or (2) the owner fails to reimburse Tamko forany additional costs incurred by Tamko attributable to the lack of reasonableaccess to the roof within 30 days of receipt of invoice from Tamko.15. Cost to obtain 5 yrs: $4.00/sq; 10 yrs: $8.50/sq; 12 yrs: $9.00/sq;15 yrs: $12.50/sq; 20 yrs: $17.50/sq16. Minimum charge 5 yrs: $400; 10 yrs: $850; 12 yrs: $850;15 yrs: $1,000; 20 yrs: $1,20017. Ineligible structure or building use Individual residences, condominiums, cooperative apartments,heated tanks, storage silos, dry kilns, car wash buildings,swimming pools, and other structures with high-humidityconditions.18. Pre-construction notice andapproval requirements19. Approved, authorized, or licensedrequirementsThe contractor is required to submit a request for issuance ofguarantee describing the job at least two weeks prior to thecommencement of the job. Job specifications must be inaccordance with Tamko's published specifications andrecommendations unless changes are approved in writing byTamko's manager of technical services.A, B, C, F, K, NNone 5 yrs: $4.00/sq; 10 yrs: $8.50/sq;12 yrs: $9.00/sq; 15 yrs: $12.50/sqNone 5 yrs: $400; 10 yrs: $850; 12 yrs: $850; 15 yrs: $1,000Individual residences, condominiums, cooperative apartments,heated tanks, storage silos, dry kilns, car wash buildings, swimmingpools, and other structures with high-humidity conditionsNone required.Yes No Yes20. Job inspection policy Tamko representative makes inspection after completion, priorto issuing warranty and, two years after issuing warranty.Tamko representative makes on-site inspection duringapplication for specification 243 only; no charge.21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionThe contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; Tamko indicates that it does not carry insurance tocover its warranty obligations.No on-site inspectionsNone; material-only warrantyNo; Tamko indicates that it does not carry insurancecovering its warranty obligations.Individual residences, condominiums, cooperative apartments,heated tanks, storage silos, dry kilns, car wash buildings, swimmingpools, and other structures with high-humidity conditionsThe contractor is required to submit a request for issuance ofguarantee describing the job at least two weeks prior to thecommencement of the job. Job specifications must be in accordancewith Tamko's published specifications and recommendations unlesschanges are approved in writing by Tamko's manager of technicalservices.Tamko representative makes inspection after completion, prior to issuingwarranty and two years after issuing warranty. Tamko representativemakes on-site inspection during application for specification 243 only; nocharge.The contractor is obligated to make repairs to workmanshipdeficiencies for two years.No; Tamko indicates that it does not carry insurance to cover itswarranty obligations.Tamko manufactures and sells the product. Tamko manufactures and sells the product. Tamko manufactures and sells the product.No renewal provision No renewal provision No renewal provision25. Assignability The guarantee shall accrue and inure only to the benefit ofthe first consumer purchaser or owner of the Tamko productand shall not be assigned, sold or transferred in any mannerwhatsoever.26. Special features/conditions No action for breach of this limited warranty may be broughtlater than one year after any cause of action has accrued.Nothing contained in the guarantee shall be construed tobe a waiver of Tamko's right for contribution or indemnity forany liability incurred as a result of this guarantee. Norepresentative, employee, agent of Tamko, or any otherperson has any authority to assume for Tamko anyadditional or other liability or responsibility. Tamko shall notbe responsible for or liable if there is any change oramendment to the Tamko built-up roof specification, unlesssuch change or amendment is approved in writing by Tamko.The warranty shall accrue and inure only to the benefit of the firstconsumer purchaser or owner of the Tamko product and shall not beassigned, sold, or transferred in any manner whatsoever. Anyassignment, sale or transfer of the warranty or of the building to whichthe product is applied shall void all warranties.Claims under warranty will require proof of purchase by firstconsumer purchaser or owner. Tamko shall not be responsible forany claims without such proof of purchase.The warranty states that owner acknowledges that it is theowner's sole responsibility to determine that the product has beeninstalled in compliance with (i) any contract specifications provided bythe owner to the contractor and (ii) the terms and conditions ofwarranty.The warranty may not be modified except in a writing signed byTamko's president. No representative, employee, agent of Tamko orany person, other than the president of Tamko, has any authority toassume for Tamko any additional or other liability or responsibility.Warranty is not valid in Hawaii, Alaska and California. Aseparate limited warranty is available for products used in California.Products are sold "as is" and "with all faults" when used outside of the48 contiguous United States.No action for breach of this limited warranty shall be brought laterthan one year after any cause of action has accrued.See item 14 above.27. Executed by owner No Yes; owner is to sign and retain warranty with thecontractor's receipt for future reference.The guarantee shall accrue and inure only to the benefit of thefirst consumer purchaser or owner of the Tamko product andshall not be assigned, sold or transferred in any mannerwhatsoever.No action for breach of this limited warranty may be brought laterthan one year after any cause of action has accrued.Nothing contained in the guarantee shall be construed to bea waiver of Tamko's right for contribution or indemnity for anyliability incurred as a result of this guarantee. Norepresentative, employee, agent of Tamko or any other personhas any authority to assume for Tamko any additional or otherliability or responsibility. Tamko shall not be responsible for orliable if there is any change or amendment to the Tamko built-uproof specification, unless such change or amendment is approvedin writing by Tamko.No659

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Texas Refinery Corporation (TRC) Tremco Incorporated Tremco Incorporated2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredTexas Refinery Corporation's Limited Roof SystemWarranty; 1988; 2M0488MightyPlate Single-Ply; MightyPlate Two-Ply System; MightyPlateLiquid Type II Glasbase Roof System; MightyPlate Liquid Poly-MatRoof System; MightyPlate Liquid MightyPly Roof System.4. Scope of coverage Material only; TRC agrees to furnish sufficient roofingmaterials to repair leaks through the roofing system causedby natural deterioration resulting from ordinary wear and tearby the elements; blisters, fishmouths, ridges, wrinkles, andsplits, unless due to movement or failure of the substrateover which the roofing system is installed; and slippage ofthe roofing system.“10 Year QA Plus Warranty For New Roofs;” January 1999 “15 Year QA Plus Warranty For New Roofs;” Rev. 1/11/99Therm 100, Therm 200, Burmastic 100, Burmastic 200,BUR Combinations; PowerPly MB Systems, HP4510,TremfastMaterial and workmanship; Tremco warrants that it will repairleaks and provide roof inspections, preventive maintenance andlimited housekeeping services on the Tremco <strong>Roofing</strong> System(TRS) in years two (2) and five (5). TRS shall be defined as theweatherproofing assembly and its components as specified byTremco (See Special Features/Conditions), which includesmembrane, insulation, flashings, and termination details.Warranty does not include recoating of roof membranes. (SeeSpecial Features/ConditionsTherm 100, Therm 200, Burmastic 100, Burmastic 200, BURCombinations; PowerPly MB Systems, HP4510, TremfastMaterial and workmanship; Tremco warrants that it will repair leaksand provide roof inspections, preventive maintenance and limitedhousekeeping services on the Tremco <strong>Roofing</strong> System (TRS) inyears two (2) and five (5). TRS shall be defined as theweatherproofing assembly and its components as specified byTremco (See Special Features/Conditions), which includesmembrane, insulation, flashings, and termination details. Warrantydoes not include recoating of roof membranes. (See SpecialFeatures/Conditions)5. Length of coverage5 years: MightyPlate Modified Bitumen Roof Membrane, MightyPlySystem, MightyPlate Liquid Type II Glasbase Roof System,MightyPlate Liquid Poly-Mat Roof System; 10 years: MightyPlateModified Bitumen Roof Membrane, MightyPlate Liquid Type IIGlasbase Roof System, MightyPlate Liquid Poly-Mat Roof Systemwith aluminum roof coating or Texotropic surfacing; MightyPly Systemwith aluminum roof coating, texotropic or Ceramic Granules.10 years 15 years6. Nature of remedy TRC agrees to furnish without charge, F.O.B. closest U.S.A.warehouse, sufficient TRC roofing patching material to stopleaks.7. Monetary limitations TRC's obligation to furnish additional material is not toexceed original purchase amount.8. Notification requirements Notification to TRC within 30 days of discovery of leak,confirming oral notice in writing within 10 days9. Exclusive or additional remedy TRC's exclusive responsibility and liability is to furnishsufficient patching materials to maintain the roofing systemin a watertight condition; owner re-cognizes and agrees thatTRC has no liability for any alleged breach of warranty,negligence, strict liability or any other theory or damage ofany nature whatsoever other than limited and exclusiveliability set forth in warranty document.Tremco will repair leaks in the roofing system and providethe inspection, preventive maintenance and housekeepingservices prescribed in the warranty in years two and five.Tremco will provide roof inspection reports.Tremco’s aggregate liability shall not in any event exceed indollar value the installed contract price of the TRS.Tremco’s maximum liability shall be prorated on a straightlinebasis over the life of the warranty, and shall not exceedsuch prorated amount.Written notice of all leaks to Tremco at 3735 Green Road,Beachwood, OH 44122, as soon as possible, but in noevent more than 30 days after leakage is or should havebeen discoveredRemedies and obligations stated in warranty are the sole andexclusive remedies of and obligations to the owner for any andall matters arising with respect to or in any way connected withthe Tremco roofing system, or its component products, or anygoods or services related thereto. Neither Tremco or anyaffiliate shall be liable for any damages which are based uponnegligence, breach of warranty, strict liability or any other theoryof liability other than the exclusive liability set forth in thewarranty. Warranty is given in lieu of any and all otherwarranties, obligations or agreements; excludes UCCwarranties.Tremco will repair leaks in the roofing system and provide theinspection, preventive maintenance and housekeeping servicespresented in the warranty in years two and five. Tremco willprovide roof inspection reportsTremco’s aggregate liability shall not in any event exceed indollar value the installed contract price of the TRS. Tremco’smaximum liability shall be prorated on a straight-line basis overthe life of the warranty, and shall not exceed such proratedamount.Written notice of all leaks to Tremco at 3735 Green Road,Beachwood, OH 44122, as soon as possible, but in no eventmore than 30 days after leakage is or should have beendiscovered.Remedies and obligations stated in warranty are the sole andexclusive remedies of and obligations to the owner for any and allmatters arising with respect to or in any way connected with theTremco roofing system, or its component products, or any goods orservices related thereto. Neither Tremco or any affiliate shall beliable for any damages which are based upon negligence, breach ofwarranty, strict liability or any other theory of liability other than theexclusive liability set forth in the warranty. Warranty is given in lieu ofany and all other warranties, obligations or agreements; excludesUCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoNeutral; TRC arranges for inspection once leak reported. Neutral Neutral12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4, 5, 6, 8, 9, 10, 11, 15, 20, 22, 23 (Also excludesdamages due to unauthorized test cuts.)1, 2, 3, 5, 9, 13, 16, 17 1, 2, 3, 5, 9, 13, 16, 17660

13. Wind coverage/exclusions Warranty excludes windstorms, hurricanes, and tor-nadoes.[TRC indicates that there is no coverage for damage causedby wind.]Tremco indicates that warranty covers roof damage resultingfrom wind speeds up to 73 miles per hour. Warranty excludeshurricane force winds (74 mph or greater) and tornadoes.Tremco indicates that warranty covers roof damage resulting fromwind speeds up to 73 miles per hour. Warranty excludes hurricaneforce winds (74 mph or greater) and tornadoes.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)M (See Special Features/Conditions.)B, C, F, G, J. Warranty also states that Tremco may voidwarranty for specific exclusions 4, 10, 2215. Cost to obtain None $10.00/square $15.00/square16. Minimum charge None $1,000 $1,50017. Ineligible structure or building use Cold-storage buildings; residential Residential Residential18. Pre-construction notice andapproval requirementsNone required None NoneB, C, F, G, J. Warranty also states that Tremco may voidwarranty for specific exclusions 4, 10, 2219. Approved, authorized, or licensedrequirementsNo Yes Yes20. Job inspection policy Inspection made by TRC sales consultant prior, at least twotimes during, and after completion, as well as two years afterissuance of warranty; no charge.Tremco technical services makes on-site inspections prior,during and after application, as well as two years and fiveyears after issuance of warranty; no charge.Tremco technical services makes on-site inspections prior,during and after application, as well as two years and five yearsafter issuance of warranty; no charge21. Contractor’s post-installationobligationAlthough this is a material-only warranty, contractorobligated to make repairs to all leaks and any defects,including materials and workmanship, for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.Contractor obligated to make repairs to workmanshipdeficiencies for two years.22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionNo; TRC indicates that it carries insurance covering itswarranty obligations and that TRC home office should becontacted for details.No; Tremco indicates that it maintains significant levels ofproduct liability insurance covering its warranty obligations.No; Tremco indicates that it maintains significant levels ofproduct liability insurance covering its warranty obligations.TRC manufactures and sells product. Tremco manufactures and sells product. Tremco manufactures and sells product.No renewal provisionWarranty can be renewed for five years at a charge of$5.00/square, with a $500 minimum.Warranty can be renewed for five years at a charge of$5.00/square, with a $500 minimum.25. Assignability No restrictions stated. Owner’s rights under warranty are not transferable. Owner’s rights under warranty are not transferable26. Special features/conditions No representative, employee, or agent of TRC or any otherperson other than the TRC manager of techni-cal services,located in Fort Worth, Texas, has any authority to change,alter, or modify the provisions of this warranty. In the eventthat (a) owner notifies TRC of the need to repair roof leaks,(b) TRC is unable to promptly inspect the roof, and (c) anemer-gency condition exists that requires immediate repairto avoid substantial damage, owner may make immediaterepair to avoid substantial damage to owner, and owner maymake temporary repairs as may be essential and suchaction shall not be a breach of warranty.27. Executed by owner NoPreventive maintenance services are repairing of tears, splitsand breaks in the roof membrane and flashings with appropriaterepair mastics and membranes, securing of rooftop equipment,sealing of exposed fasteners, metal projections, termination barand counterflashing, and repairing of splits and blisters whichthreaten roof integrity. Housekeeping services are removal ofincidental debris and disposal at owner’s approved on-sitelocation.Roof inspection services are visual inspection of roofmembrane, roof surface conditions and flashing systems.Housekeeping and preventive maintenance does not absolve orreplace the owner’s responsibility for keeping effluent and debrisfrom the roof surface. Owner must pay for additionalcleaning/inspections or assume responsibility for such cleaningsif scheduled cleanings are not sufficient to maintain roof integrity.Lack of care and maintenance is cause for cancellation ofwarranty.If a leak is not within the warranty coverage, Tremco shalladvise the owner, and the owner shall have repairs performedwithin thirty days, according to Tremco specifications, by aTremco certified or approved applicator. Owner shall providewaivers of subrogation upon request. Any unresolved issuesunder the warranty shall be submitted to the exclusivejurisdiction of the courts of Cuyahoga County, Ohio, andgoverned by Ohio law.No; warranty states that owner agrees that the warranty,services and remedies set forth in the warranty are exclusivePreventive maintenance services are repairing of tears, splits andbreaks in the roof membrane and flashings with appropriate repairmastics and membranes, securing of rooftop equipment, sealing ofexposed fasteners, metal projections, termination bar andcounterflashing, and repairing of splits and blisters which threatenroof integrity. Housekeeping services are removal of incidentaldebris and disposal at owner’s approved on-site location.Roof inspection services are visual inspection of roof membrane,roof surface conditions and flashing systems. Housekeeping andpreventive maintenance does not absolve or replace the owner’sresponsibility for keeping effluent and debris from the roof surface.Owner must pay for additional cleaning/inspections or assumeresponsibility for such cleanings if scheduled cleanings are notsufficient to maintain roof integrity. Lack of care and maintenance iscause for cancellation of warranty.If a leak is not within the warranty coverage, Tremco shall advisethe owner, and the owner shall have repairs performed within thirtydays, according to Tremco specifications, by a Tremco certified orapproved applicator. Owner shall provide waivers of subrogationupon request. Any unresolved issues under the warranty shall besubmitted to the exclusive jurisdiction of the courts of CuyahogaCounty, Ohio, and governed by Ohio law.No; warranty states that owner agrees that the warranty, servicesand remedies set forth in the warranty are exclusive.661

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity Uniroof Corporation Uniroof Corporation U.S. Intec, Inc.2. Title, original publication date, andidentifying symbol, if anyUniroof Corporation ΑTraffigard Limited Warranty≅; January1, 1994Uniroof Corporation ΑUniroof Membrane <strong>Roofing</strong> LimitedWarranty≅; April 1989; 4/24/89"U.S. Intec, Inc. <strong>Roofing</strong> and Waterproofing Products Full ValueWarranty"; 1995.3. Product, specification, or systemcoveredTraffigardUniroof Membrane <strong>Roofing</strong>For modified bitumen specifications using SP-4, GBSP-4,GBSP-4FR, GBSP-250FR or Intec Flex membranes, see theU.S. Intec, Inc. Modified Bitumen <strong>Roofing</strong> Systems manual fordetails.4. Scope of coverage Material only; Uniroof warrants the Traffigard material willnot deteriorate in its condition to the extent of ceasing to becapable of providing an effective weatherproof membrane.Only deterioration as a result of faulty manufacture ofTraffigard or defective products used in such manufacture iscovered. Uniroof does not warrant to color matchreplacement material to surrounding area. Blisters,regardless of size, shall not be considered to be a defect.5. Length of coverage 10 years 10 or 15 yearsMaterial and workmanship; applicator warrants for a periodof two years that Uniroof roofing membrane will remain in awatertight condition. For the next eight or thirteen years,depending upon the length of the warranty selected, Uniroofwarrants that the Uniroof roofing membrane will remainwatertight.Material and workmanship (See Special Features/Conditions);U.S. Intec guarantees it will repair or replace, at its solediscretion, the Intec roofing membranes and base flashings, asis necessary to correct leaks resulting from (a) manufacturingdefects; (2) deterioration as a result of ordinary wear and tearfrom exposure to the elements; (3) splits, fissures, or tears notcaused by structural or roof deck movement or failure; and (4)workmanship in installing the roofing membrane and baseflashing.10, 12, 15 or 20 years (Length of coverage depends onmembrane, system configuration and contractor status).6. Nature of remedy Uniroof will furnish Traffigard material as may be required torepair those areas that have failed as a result of thedeterioration of the originally furnished Traffigard material.Labor to install this material is not included.7. Monetary limitations The total cost of materials provided under warranty shall notexceed in the aggregate over the life of warranty a sumgreater than the original cost of the Uniroof suppliedmaterial.8. Notification requirements Prompt written notification to Uniroof within thirty days afterowner's discovery of any failure of the roof to perform aswarrantedApplicator will, for the first two years, and Uniroof will thereafter,each at its own expense, cause the repairs ormodifica-tions to the membrane to be made to the extentnecessary to enable the membrane to perform as warranted.The total cost of repairs provided under warranty shall notexceed in the aggregate over the life of warranty a sumgreat-er than the original cost of Uniroof-supplied materialand the labor used to install such material.Written notification sent by certified mail to applicator andUniroof at P.O. Box 160133, Altamonte Springs, FL 32716--0133, during the respective warranty periods within 30 daysafter owner's discovery of any failure of the roof to performas warranted.U.S. Intec will repair or replace, at its sole discretion, the Intecroofing membranes, covered roof accessories and baseflashings, or portion thereof, as is necessary to correct leaks.During first two years, Intec shall have no obligation to repair anyleaks due to misapplication.None stated.Written notice to U.S. Intec within 15 days of discoveringconditions which are the basis of a warranty claim against U.S.Intec.9. Exclusive or additional remedy Warranty states that its provisions shall constitute theexclusive remedy; warranty is in lieu of all other guaranteesand warranties; excludes UCC warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicability12. Specific exclusions from coverage(see item 12 in Introduction)13. Wind coverage/exclusions14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)Warranty states that its provisions shall constitute theexclusive remedy. Warranty is in lieu of all other guaranteesand warranties; excludes UCC warranties.No No NoWarranty will be ineffective if, in Uniroof's judgement, theperformance of the material is impaired by any alterations orrepairs made without Uniroof's written approval or by workdone by anyone other than a Uniroof-approved applicator.1, 3, 4, 5, 13, 10, 18, 22Uniroof indicates that there is no coverage for damagecaused by wind.Uniroof's determination if warranty ineffective becauseperformance of the roof and/or the membrane is impaired by(1) any alterations or repairs made without Uniroof's writtenapproval, (2) by work done on the roof by anyone other thana Uniroof approved roofer/applicator, r (3) by change in useof the roof or building1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 15, 22, 23. Warranty alsoexcludes tests or test cuts not authorized by Uniroof.Warranty excludes windstorms, hurricanes, and tornadoes.Remedy set forth in warranty shall be the sole and exclusiveremedy available to owner. Guarantee is in lieu of any otherguarantees or warranties, and any other obligation or liability onthe part of U.S. Intec whether any claim is based upon strictliability, negligence, breach of warranty or any other theory orcause of action; excludes UCC warranties.U.S. Intec's determination.B, C, F, H, N A, B, C, F, H, I, J, L, N, R C, G, H, I, L, M15. Cost to obtain None 10 years: $4.00/square; 15 years: $7.00/square1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 22. Warranty statesthat Specific Condition H also makes the warranty inapplicable.Warranty excludes windstorms, hurricanes, and tornadoes. U.S.Intec indicates that there is no coverage for damage caused by wind.10 yrs: no charge; 12 yrs: no charge; 15 yrs: $10.00/sq (for IntecFlex); 20 years: $15.00/sq (for Intec Flex)662

16. Minimum chargeNone10 years: $200; 15 years: $350 10 yrs: no charge; 12 yrs: no charge;15 yrs: $1,000; 20 yrs: $1,500.17. Ineligible structure or building use None None See U.S. Intec's specification manual.18. Pre-construction notice andapproval requirementsContractor required to give pre-construction notice and toobtain pre-construction approval from Uniroof by fax, mail, ortelephone.Contractor required to give pre-construction notice and toobtain pre-construction approval from Uniroof in writing or bytelephone.Contractor provides notice to U.S. Intec through submittal orprior to job start.19. Approved, authorized, or licensedrequirements20. Job inspection policy21. Contractor’s post-installationobligation22. Backed by named insurance orsurety23. Issuing entity manufactures and/orsells products24. Conditions for renewal orextensionYes Yes YesUniroof makes on-site inspections prior to, during, and afterapplication, as well as two years after issuance of warranty.Uniroof does charge for inspections on jobs that are out-ofstate.Charges may be waived on larger jobsContractor obligated to repair all leaks and any defects fortwo years.No; Uniroof indicates that it does not carry insurancecovering its warranty obligations.Uniroof sells product only.Uniroof makes on-site inspections prior to and duringapplication at its discretion and after completion prior toissuance of warranty; Uniroof charges out-of-pocketexpenses for inspections on jobs that are out of state.None; material-only warrantyNo; Uniroof indicates that it carries product liability insuranceUniroof manufactures and sells the product.No renewal provision No renewal provision. No renewal provision25. Assignability Nontransferable Warranty is nontransferableU.S. Intec technical field representatives may make periodic on-siteinspections prior to and during application. Technical field representativeperforms on-site inspection after completion prior to issuance of warranty;no charge.U.S. Intec may at its option make an inspection of the roofing systemduring the period between 23 and 25 months after validation of theguarantee and protect the Owner and contractor with a report detailingany application related inadequacies or leaks in the membrane or baseflashing.Contractor is obligated to make repairs to all leaks andworkmanship deficiencies for 2 years after the completion of theroof.No; U.S. Intec indicates that it carries product liability insurancecovering its guarantee obligations.U.S. Intec manufactures and sells product.Guarantee is assignable to another owner of the building if the followingconditions are met: (1) The request is sent by certified mail to U.S. Intec,Inc., Attn: <strong>Contractors</strong> Services Department, 1361 Alps Rd., Wayne, NJ07470 within 30 days after ownership transfer; (2) the membrane isinspected by Intec and any required repairs are completed at the owner'sexpense; (3) the proposed assignment is approved in writing by anauthorized Intec Contractorl Services Manager; and (4) an assignment feeof $750 is paid to Intec. Guarantee is not otherwise transferable orassignable, directly or indirectly..26. Special features/conditions This is a joint contractor/manufacturer warranty in that thewarranty document itself states that the applicator warrantsthat the roof will remain in a watertight condition for the firsttwo years. In addition to execution by building owner andUniroof, the warranty is to be signed by the applicator, whowarrants by his signature that the material has been appliedas specified in the supplier's application manual.Owner responsible for all costs for inspection and/or repairsif reported condition is found not to be covered under thewarranty. Responsibility of Owner to insure at all time that allrequired routine roof maintenance is performed, includingcleaning roof drains and replacing deteriorated caulking.This is a joint contractor/manufacturer warranty in that thewarranty document itself states that the applicator warrantsthat the roof will remain in a watertight condition for the firsttwo years. In addition to execution by building owner andUniroof, the warranty is to be signed by the applicator, whowarrants by his signature that the material has been appliedas specified in the supplier's application manual.Owner responsible for all costs for inspection and/or repairsif reported condition is found not to be covered under thewarranty. Responsibility of Owner to insure at all time that allrequired routine roof maintenance is performed, includingcleaning roof drains and replacing deteriorated caulking.Warranty states that owner and roofing contractor expressly agree that ifthe owner discovers or should have discovered within the first two yearsleaks in the membrane or base flashings due to misapplication or to theroofer's failure to install the membrane and base flashings in compliancewith the Intec specification manual in effect at the time the roof wasinstalled, it is the roofing contractor's sole responsibility to repair thoseleaks and Intec shall have no obligation to repair any such leaks.If Intec determines after inspection that a complaint is expresslyexcluded by the terms of the guarantee, Owner shall be responsible forreimbursing Intec for the reasonable costs associated with making theinspection. If the Owner fails to reimburse U.S. Intec within 30 days ofreceipt of an invoice, U.S. Intec's guarantee obligations are terminated. Ifthe inspection occurs within the first two years after validation of theguarantee, the reimbursable expenses are the just obligation of the Ownerand roofing contractor.I f Intec discovers conditions in the Intec membrane or baseLashing or adjacent to the roof system that are not covered by theguarantee but which have effected or may effect the __ integrity of theIntec roofing membrane or base flashings,Owner agrees to completely remedy the conditions within 30 daysafter notice from Intec, weather permitting. Owner shall send aninspection report to Intec detailing such repairs within 15 days of theircompletion. Owner may make essential emergency temporary repairs atOwner's expense. Owner's failure to comply with terms and conditionsshould immediately terminate Intec's obligations under the guarantee .infull without further notice.27. Executed by owner Yes (See Special Features/Conditions.) Yes No663

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entityVersico Incorporated,a subsidiary of Carlisle CompaniesVersico Incorporated,a subsidiary of Carlisle CompaniesVersico Incorporated,a subsidiary of Carlisle Companies2. Title, original publication date,and identifying symbol, if anyVersico <strong>Roofing</strong> System Warranty (With ExtendedMembrane Material Warranty); June 1995ΑVersico Total <strong>Roofing</strong> System Warranty≅; June 1995ΑVersico Total <strong>Roofing</strong> System Warranty (With ExtendedMembrane Material Warranty)≅; June 19953. Product, specification, or systemcoveredVersiGard roofing systems, VersiWeld roofing systems;available for black VersiGard membranes onlyVersiGard roofing systems, VersiWeld roofing systemsVersiGard roofing systems, VersiWeld roofing systems; availablefor black VersiGard membranes only.4. Scope of coverage Material and workmanship for initial 5 or 10 years; materialonlyfor as long as 20 years. For initial term, Versicowarrants it will repair leaks in the Versico roofing systemscaused by defects in the roofing system's material orworkmanship of the Versico authorized roofing contractor ininstalling the same. For the balance of 20 years, Versico willprovide to the owner a credit to be applied toward thepurchase of new membrane material in the event ofpremature deterioration of the Versico membrane material tothe point of failure. The Versico roofing system is defined asthe Versico membrane, flashings, adhesives and sealants,and any other Versico brand products utilized in theinstallation.5. Length of coverage5 or 10 years material and workmanship; coverage for blackVersiGard membrane material only can be extended up to20 years.6. Nature of remedy For the initial 5- or 10-year term, the owner's remedies andVersico's liability shall be limited to Versico's repair of theleak in the roofing system. For balance of 20 years, Versicowill provide a credit to be applied toward the purchase ofnew membrane material, based on the number of remainingmonths of warranty and prorated at current prices.7. Monetary limitations For 5- or 10-year material and workmanship warranty: nomonetary limitation stated; extended warranty on membranematerial: credit based on the number of remaining months ofwarranty and prorated at current prices.8. Notification requirements The owner shall provide Versico with written notice toVersico at 3485 Fortuna Drive, Akron, OH 44312, within 30days of the discovery of any leaks in the roofing system.9. Exclusive or additional remedy Remedies stated in warranty are the sole and exclusiveremedies for failure of the roofing system or its components;excludes UCC warranties.Material and workmanship; Versico warrants that it will repairleaks in the Versico total roofing system caused by defectsin the roofing system's material or workmanship of theVersico authorized roofing contractor in installing the same.The Versico total roofing system is defined as the Versicomembrane, flashings, adhesives and sealants, fastenerassemblies, metal edging, any Versico-brand productsutilized in the installation, and any other products specificallyapproved by Versico for coverage under warranty.10 or 15 years; white VersiGard limited to 10 years.The owner's remedies and Versico's liability shall be limitedto Versico's repair of the leak in the roofing system.None stated.The owner shall provide Versico with written notice toVersico at 3485 Fortuna Drive, Akron, OH 44312, within 30days of the discovery of any leaks in the roofing system.Remedies stated in warranty are the sole and exclusiveremedies for failure of the roofing system or its components;excludes UCC warranties.Material and workmanship for initial 10 or 15 years; material-onlyfor as long as 20 years. For initial term, Versico warrants it willrepair leaks in the Versico total roofing system caused by defectsin the roofing system's material or workmanship of the Versicoauthorized roofing contractor in installing the same. For thebalance of 20 years, Versico will provide to the owner a credit tobe applied toward the purchase of new membrane material inthe event of premature deterioration of the Versico membranematerial to the point of failure. The Versico total roofing systemis defined as the Versico membrane, flashings, adhesives andsealants, any other Versico-brand products utilized in theinstallation, and any other products specifically approved byVersico for coverage under the warranty.10 or 15 years material and workmanship; coverage for blackVeriGard membrane material only can be extended up to 20years.For initial 10- or 15-year term, the owner's remedies andVersico's liability shall be limited to Versico's repair of the leak inthe roofing system. For balance of 20 years, Versico will providea credit to be applied toward the purchase of new membranematerial, based on the number of remaining months of warrantyand prorated at current prices.For 10- or 15-year material and workmanship warranty: nomonetary limitation stated; extended warranty on membranematerial: credit based on the number of remaining months ofwarranty and prorated at current prices.The owner shall provide Versico with written notice to Versico at3485 Fortuna Drive, Akron, OH 44312, within 30 days of thediscovery of any leaks in the roofing system.Remedies stated in warranty are the sole and exclusive remediesfor failure of the roofing system or its components; excludes UCCwarranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoVersico's determination Versico's determination Versico's determination12. Specific exclusions fromcoverage (see item 12 inIntroduction)1, 2, 3, 4 (including damage by the building structure failingto have adequate strength to support all live and dead loads,including water and snow loads), 9 (including recreationalactivities), 10, 11, 13, 16, 22. Warranty excludes damagecaused by insects.1, 2, 3, 4 (including damage by the building structure failingto have adequate strength to support all live and dead loads,including water and snow loads), 9 (including recreationalactivities), 10, 11, 13, 16, 22. Warranty excludes damagecaused by insects.1, 2, 3, 4 (including damage by the building structure failing tohave adequate strength to support all live and dead loads,including water and snow loads), 9 (including recreationalactivities), 10, 11, 13, 16, 22. Warranty excludes damage causedby insects.13. Wind coverage/exclusions Versico indicates that warranty covers roof damage resultingfrom wind speeds up to 55 mph. Warranty excludes winds inexcess of 55 mph measured at roof level and tornadoes,without prior approval from Versico.Versico indicates that warranty covers roof damage resultingfrom wind speeds up to 55 mph. Warranty excludes winds inexcess of 55 mph measured at roof level and tornadoes,without prior approval from Versico.Versico indicates that warranty covers roof damage resultingfrom wind speeds up to 55 mph. Warranty excludes winds inexcess of 55 mph measured at roof level and tornadoes, withouprior approval from Versico.664

14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B (including taking of test cuts), C, F (including periodiccleaning of drains and removal of harmful debris from roof),GB (including taking of test cuts), C, F (including periodiccleaning of drains and removal of harmful debris from roof),GB (including taking of test cuts), C, F (including periodic cleaningof drains and removal of harmful debris from roof), G15. Cost to obtain16. Minimum charge17. Ineligible structure or buildinguseManufacturer charges for this warranty; however, they refused to provide costs.Contact manufacturer directly for specific pricing information.Single-family residences Single-family residences Single-family residences18. Pre-construction notice andapproval requirementsThe contractor is required to submit job approval formsbefore project is authorized for warranty.The contractor is required to submit job approval formsbefore project is authorized for warranty.The contractor is required to submit job approval forms beforeproject is authorized for warranty.19. Approved, authorized, or licensedrequirementsYesYesYes20. Job inspection policyVersico inspector makes on-site inspection after completion,prior to issuance of warranty.Versico inspector makes on-site inspection after completion,prior to issuance of warranty.Versico inspector makes on-site inspection after completion,prior to issuance of warranty; $300 inspection charge.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs to workmanshipdeficiencies for two (2) years.The contractor is obligated to make repairs to workmanshipdeficiencies for two (2) years.The contractor is obligated to make repairs to workmanshipdeficiencies for two (2) years.22. Backed by named insurance orsuretyNo; Versico indicates that it does not carry insurancecovering its warranty obligations.No; Versico indicates that it does not carry insurancecovering its warranty obligations.No; Versico indicates that it does not carry insurance covering itswarranty obligations.23. Issuing entity manufacturesand/or sells productsVersico manufactures and sells product.Versico manufactures and sells product.Versico manufactures and sells product.24. Conditions for renewal orextensionNo renewal provisionNo renewal provisionNo renewal provision25. AssignabilityWarranty states that it is not assignable by operation of lawor otherwise. Application may be made by a new buildingowner for reissuance of the warranty during the originalwarranty period. Certain procedures, including an inspectionof the roofing system by Versico representative, and fees willapply to any reissuance. Versico reserves the right, in itssole discretion, to refuse to reissue this warranty.Warranty states that it is not assignable by operation of lawor otherwise. Application may be made by a new buildingowner for reissuance of the warranty during the originalwarranty period. Certain procedures, including an inspectionof the roofing system by Versico representative, and fees willapply to any reissuance. Versico reserves the right, in itssole discretion, to refuse to reissue this warranty.Warranty states that it is not assignable by operation of law orotherwise. Application may be made by a new building owner forreissuance of the warranty during the original warranty period.Certain procedures, including an inspection of the roofing systemby Versico representative, and fees will apply to any reissuance.Versico reserves the right, in its sole discretion, to refuse toreissue this warranty.26. Special features/conditionsBy notifying Versico of a leak, the owner authorizes Versicoto investigate the cause of the leak. Should the investigationreveal the cause of the leak to be outside the scope of thewarranty, investigation and repair costs shall be paid byowner.By notifying Versico of a leak, the owner authorizes Versicoto investigate the cause of the leak. Should the investigationreveal the cause of the leak to be outside the scope of thewarranty, investigation and repair costs shall be paid byowner.By notifying Versico of leak, the owner authorizes Versico toinvestigate the cause of the leak. Should the investigation revealthe cause of the leak to be outside the scope of the warranty,investigation and repair costs shall be paid by owner.27. Executed by ownerNoNoNo665

Roof Membrane Warranties (Built-Up, Modified Bitumen, and Single-Ply)1. Identity of issuing entity2. Title, original publication date, andidentifying symbol, if any3. Product, specification, or systemcoveredVersico Incorporated,a subsidiary of Carlisle CompaniesVersico <strong>Roofing</strong> System Warranty; June 1995VersiGard roofing systems, VersiWeld roofing systemsW.P. Hickman Systems, Inc., W.P. Hickman Systems, Inc.,Hickman <strong>Roofing</strong> Systems Membrane AssembliesGuarantee; 1985; GOES 447Roof Assemblies Guarantee January 1, 1980; GOES 447Built-up <strong>Roofing</strong> Specifications; Modified Bitumen Specifications;Cold-Process BUR Specifications; Single-Ply Specifications4. Scope of coverage Material and workmanship; Versico warrants that it willrepair leaks in the Versico total roofing system caused bydefects in the roofing system's material or workmanship ofthe Versico authorized roofing contractor in installing thesame. The Versico total roofing system is defined as theVersico membrane, flashings, adhesives and sealants,fastener assemblies, metal edging, any Versico-brandproducts utilized in the installation, and any other productsspecifically approved by Versico for coverage underwarranty.Material and workmanship; Hickman guarantees that it will,at its expense, repair or cause to be repaired the roofingsystem to an extent to return the system to a watertightcondition.5. Length of coverage 10 or 15 years 10 years 10 yearsMaterial and workmanship; Hickman guarantees that it will repairor cause to be repaired leaks in the Hickman roof assembly.6. Nature of remedy The owner's remedies and Versico's liability shall be limitedto Versico's repair of the leak in the roofing system.Hickman will take appropriate action to repair leaks that mayoccur due to ordinary wear that may be required because ofdeficiencies resulting from workmanship during themembrane and flashing installation. Hickman's soleresponsibility is the cost of repairs to the membraneassembly.Hickman will inspect the roof and, if leak is covered under theguarantee, Hickman with at its own expense make or cause tobe made all necessary repairs to the Hickman Roof Assembly toput it into watertight condition.7. Monetary limitations None stated. None stated None stated.8. Notification requirements The owner shall provide Versico with written notice toVersico at 3485 Fortuna Drive, Akron, OH 44312, within 30days of the discovery of any leaks in the roofing system.9. Exclusive or additional remedy Remedies stated in warranty are the sole and exclusiveremedies for failure of the roofing system or its components;excludes UCC warranties.Written notification within 10 days after discovery of a leakon the roofing system or flashing assemblySeeks to exclude and limit UCC implied warranties.Written notice to Hickman within 10 days after discovery of aleak on the roofing system or flashing assemblySeeks to exclude and limit UCC implied warranties.10. Inclusion of consequentialdamages11. Determination of warrantyapplicabilityNo No NoVersico's determination Neutral (no provision) Neutral (Hickman inspects roof)12. Specific exclusions from coverage(see item 12 in Introduction)1, 2, 3, 4 (including damage by the building structure failingto have adequate strength to support all live and dead loads,including water and snow loads), 9 (including recreationalactivities), 10, 11, 13, 16, 22. Warranty excludes damagecaused by insects.1, 2, 3, 4, 5, 6, 8, 10, 13, 17, 18, 22 1, 2, 3, 4, 5, 6, 8, 10, 13, 17, 18, 2213. Wind coverage/exclusionsVersico indicates that warranty covers roof damage resultingfrom wind speeds up to 55 mph. Warranty excludes windsin excess of 55 mph measured at roof level and tornadoes,without prior approval from Versico.Warranty excludes hurricane-related winds. Warranty coversroof damage resulting from wind speeds up to 73 miles perhour.Warranty excludes hurricane-related winds. Warranty covers roofdamage resulting from wind speeds up to 73 miles per hour.14. Specific conditions to makewarranty ineffective or null andvoid (see item 14 in Introduction)B (including taking of test cuts), C, F (including periodiccleaning of drains and removal of harmful debris from roof),GCC15. Cost to obtain call Versico $4.00/square16. Minimum charge call Versico $500 $500666

17. Ineligible structure or building use Single-family residencesCold-storage, freezer, and dry kiln buildings; Hickmanreviews all structures to determine eligibility.Cold-storage, freezer, and dry kiln buildings; Hickman reviews allstructures to determine eligibility.18. Pre-construction notice andapproval requirementsThe contractor is required to submit job approval formsbefore project is authorized for warranty.Contractor required to give verbal or written notice toschedule pre-job conference.Contractor required to give verbal or written notice to schedulepre-job conference.19. Approved, authorized, or licensedrequirementsYes Yes Yes20. Job inspection policy Versico inspector makes on-site inspection after completion,prior to issuance of warranty; $300 inspection charge.Hickman field representative makes on-site inspections priorto, during, and after application as well as two years aftercompletion and makes yearly inspections; no charge.Hickman field representative makes on-site inspections prior to,during, and after application as well as two years aftercompletion and makes yearly inspections; no charge.21. Contractor’s post-installationobligationThe contractor is obligated to make repairs to workmanshipdeficiencies for two (2) years.Contractor obligated to make repairs to workmanshipdeficiencies for two yearsContractor obligated to make repairs to workmanshipdeficiencies for two years22. Backed by named insurance orsuretyNo; Versico indicates that it does not carry insurancecovering its warranty obligations.No23. Issuing entity manufactures and/orsells productsVersico manufactures and sells product.W.P. Hickmkan Systems, Inc. manufactures and sells theproduct.24. Conditions for renewal orextensionNo renewal provision Guarantees applicable to reroofing, retrofit, and new constructionprojects can be renewed for 10 years; guarantees applicable torestoration projects can be renewed for five years. Owner mustnotify Hickman 60 days prior to guarantee expiration. Hickmanrepresentative makes inspection and notifies owner of all repairsrequired by Hickman. Owner pays for all repairs, which must bemade with Hickman materials by an approved Hickmancontractor. Upon completion and approval by Hickman of repairsand payment of guarantee charge, extended guarantee will beissued. Current cost for 5 or 10 year extension is $5.00/square.25. Assignability Warranty states that it is not assignable by operation of lawor otherwise. Application may be made by a new buildingowner for reissuance of the warranty during the originalwarranty period. Certain procedures, including an inspectionof the roofing system by Versico representative, and fees willapply to any reissuance. Versico reserves the right, in itssole discretion, to refuse to reissue this warranty.26. Special features/conditions By notifying Versico of leak, the owner authorizes Versico toinvestigate the cause of the leak. Should the investigationreveal the cause of the leak to be outside the scope of thewarranty, investigation and repair costs shall be paid byowner.Transferable by the building owner to a subsequentpurchaser of the property by giving not less than 10 dayswritten notice to Hickman of proposed transfer; Hickman willinspect roofing system and make writ-ten report to buildingowner and proposed purchaser of findings.Guarantee may be transferred by the building owner to asubsequent purchaser of the property by giving not less than tendays written notice to Hickman of proposed transfer; Hickmanwill inspect roof and make written report to building owner andproposed purchaser of findings.To the extent any repairs to any part of the building other thanthe Hickman Roof Assembly are required, or the removal orreplacement of any traffic surfaces or other appurtenances builtover the roof are required in order to put the Hickman RoofAssembly in a watertight condition, the liability for or expense ofany such repair, removal, or replacement shall be assumed andpaid by the owner.27. Executed by owner No No No667

<strong>Index</strong> to Incomplete DataIncomplete DataIncomplete DataACRYMAX TECHNOLOGIES INC. 677 CELOTEX CORP. 675221 Brooke Street 4010 Boy Scout Blvd. 677Media, PA 19063 Tampa, FL 33607610/566-7470 813/873-1700FAX: 610/891-0834 FAX: 813/873-4080E-mail: acrymax.comE-mail:Web:Web:ALCO-NVC, INC. 677 CONKLIN CORP. 677P.O. Box 14001 P.O. box 155Detroit, MI 48214 Shakopee, MN 55379-0155800/323-0029 800/888-8838FAX: 313/331-4726 FAX: 612/496-4285E-mail: alconvc@aol.comE-mail: marketing@conklin.comWeb: www.alconvc.comWeb: www.conklin.comALLIED SIGNAL ROOFING SYSTEMS 674 DANOSA CARIBBEAN INC. 6752000 Regency Parkway, Suite 225 Box 13757, Santurce StationCary, NC 27511-8507 San Juan, PR 00908919/461-0670 or 800/221-6490 809/785-4545FAX: 919/461-4720 FAX: 809/787-3902E-mail: alliedroof@alliedsignal.comE-mail: danosapr@icepr.comWeb: www.alliedroof.comWeb:ALUMINUM COATING MFRS. 677 DEWITT PRODUCTS CO. 6787301 Bessemer Avenue 5860 PlumerCleveland, OH 44127 Detroit, MI 48209800556-8030 313/554-0575 or 800/962-8599FAX: 216/341-5833 FAX: 313/554-2171E-mail: sales@alum.comE-mail:Web:Web: www.dewitt@globalbiz.comAMERICAN TAR COMPANY 677 GARLAND COMPANY, INC. 675A Division of Fields Company, LLC3800 E. 91st Street2240 Taylor Way Cleveland, OH 44105Tacoma, WA 98421 216/641-7500253/627-4098 FAX: 216/641-0633FAX: 253/627-3859E-mail:Web:Web:ANDEK CORP. 674 GRACE & CO., W.R. 676P.O. Box 392 677 62 Whittemore Avenue850 Glen Avenue Cambridge, MA 02140Moorestown, NJ 08057 617/876-1400888/88ANDEKFAX:FAX: 888/44ANDEKE-mail:E-mail:Web:BARRETT COMPANY 674 GRUNDY DIV. OF HENRY COMPANY 6783422 Old Capitol Trail 2911 Slauson AvenueWilmington, DE 19808 Huntington Park, CA 90255800/647-0100 213/583-5000FAX: FAX: 213/582-6429E-mail:E-mail:Web;Web:671

<strong>Index</strong> to Incomplete DataIncomplete DataIncomplete DataHICKMAN SYSTEMS, INC. W.P. 676 POLYGLASS USA 67630700 Solon Industrial Parkway 150 Lyon DriveSolon, OH 44139 Fernley, NV 89408440/248-7760 702/575-6007FAX: 440/248-6524 FAX: 702/575-2314E-mail: wphickman@wphickman.comE-mail: otto@polyglass.comWeb:Web:IKO INDUSTRIES 675 REPUBLIC POWDERED METALS, INC. 678120 Hay Road 3735 Green RoadWilmington, DE 19809 Beachwood, OH 44122302/764-3100 800/551-7081FAX: 302/764-5852 FAX: 888/742-1759E-mail:E-mail:Web:Web:IMPERITALIA S.P.A. 675 R.M. LUCAS CO. 678Strada Lanzo 1313211 South Wood Street10148 Torino, ITALY Chicago, IL 6060811-262-0941 773/523-4300FAX: 11-26201621 773/523-3290E-mail:E-mail: rmlucas@ix.netcam.comWeb:Web:KOPPERS INDUSTRIES INC. 675 SOMAY PRODUCTS, INC. 678436 Seventh Avenue 4301 N.W. 35th AvenuePittsburgh, PA 15219 Miami, FL 33142-4382800/558-2706 305/633-6333 or 800/356-3521FAX: 412/227-2002 FAX: 305/334-4289E-mail:E-mail:Web: www.koppes.comWeb:MBTECHNOLOGY CORPORATION 675 SOUTHWESTERN PETROLEUM CORP. 678188 South Teilman Avenue 534 N. Main StreetFresno, CA 93706 P.O. Box 961005800/621-9281 817/332-2336 or 800/877-9372FAX: 209/233-4607 FAX: 817/877-4047E-mail:E-mail: swepcousa.comWeb:MONSEY DIV OF HENRY COMPANY 675 SUNGUARD MARKETING CORP. 678336 Cold Stream Road 4432 N.E. DavisKimberton, PA 19442 Portland, OR 97213800/523-0268 503/235-9206FAX: 610/933-4598 FAX: 503/235-9206E-mail: monsey-bakor.comE-mail:Web:Web:PERFORMANCE ROOF SYSTEMS, INC. 676 TEXAS REFINERY CORP. 6794821 Chelsea Avenue One Refinery PlaceKansas City, MO 64130 P.O. Box 711816/921-0221 Ft. Worth, TX 76101FAX: 816/921-5540 817/332-1161E-mail: prshunt@aol.com FAX: 817/332-2340Web:Web: www.texasrefinery..com672

<strong>Index</strong> to Incomplete DataIncomplete DataIncomplete DataTOPCOAT, INC. A SUBSIDIARY OF 679 UNIROOFGAF MATERIALS CORP. P.O. Box 16013324 Industrial Road Altamonte Springs, FL 32716-0133Walpole, ME 02081-1305 407/869-5110800/323-0009 FAX:FAX: 508/660-2471E-mail:E-mail:Web:UNIFLEX, INDUSTRIAL DIV OF KOOL 679 W P HICKMAN SYSTEMS INC. 676SEAL INC.30700 Solon Industrial Parkway1499 Enterprise Parkway Solon,OH 44139Twinsburg, OH 44087 440/248-7760216/425-4717 FAX: 440/248-6524FAX: 216/425-9778E-mail: wphickman@wphickman.comE-mail:Web:673

Section 6: Incomplete DataIn publishing the Low-Slope <strong>Roofing</strong> Materials Guide, NRCA maintains a policy of total objectivity in its reporting ofdata. Nothing is required from listing manufacturers other than to adhere to the prescribed reporting format. Anymanufacturer of a product in the product categories included in the Guide can be listed by submitting theirinformation in accordance with procedures developed for this purpose.Product manufacturers included in the Guide are encouraged to provide NRCA with listing information for theirproducts that is as complete as possible for publication in the Guide. Beginning with the 2000 edition of the Guide,in situations where manufacturers have submitted product information (e.g., test results) that is deemed to beincomplete, these specific products have been omitted from the detailed listing sections of the Guide.Manufacturers and products with incomplete product listing information are included in this new section of theGuide, entitled Section 6: Incomplete Data.NRCA has established this policy regarding manufacturers’ product listings with incomplete data at the request ofusers of the Guide, who are clearly seeking detailed and complete product information from the Guide and thecompanies listed.Users of the Guide who are interested in specific product information on a manufacturer’s product that is included inSection 6: Incomplete Data are encouraged to contact the specific product manufacturer directly. Manufacturers’contact information is provided in the index section of the Guide.For the 2000 edition of the Guide, incomplete product data was provided by the following manufacturers for thespecific products indicated.ROOF COVERINGS (Section 1)Built-Up <strong>Roofing</strong>NoneManufacturerNoneProductsModified BitumenManufacturerProductsAllied SignalInfinitee 20 SMInfinitee 30 GMCInfinitee 30 GMC-FRInfinitee GTCInfinitee GTC-FRInfinitee SFAndek Flashband 28Barrett Company Ram 200Ram 201Ram 203Ram 250Ram 306Ram 306 FRRam 306 HPRam 309Ram 309 FRRam 309 HTRam Tough 400 PS674

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!