Gigrac 1000st User Guide English - Soundcraft

More documents

Recommendations

Info

Rackmounting Your GigRacThe GigRac 1000st can be rack mounted into a standard 19’’rack. Thisis useful for fixed instalations or for applications where the GigRac mightneed to be installed into a portable 19’’ rack along with other equipment.Caution: leave a free 1U space above the Gigrac to allow internal heatto escape.remove 4 rack boltsremove 1 hex socket screw26remove gigrac from case.Remove 4 screws that secure strap toside panels and remove strap.Gigrac is now ready for rack mounting.
Using your GigMatGigRac comes supplied with a unique non-slip ‘GigMat’ which can beplaced underneath the GigRac when it has to be put onto a slipperysurface such as a shiny table top.Under normal circumstances the GigMat will prevent the GigRac fromslipping around.If necessary the GigMat can be cleaned using a damp cloth.Please note - it is very important that the GigMat onlybe used on level surfaces.27
Page 1 and 2: GREAT SOUND MADE EASYPROFESSIONAL P
Page 3 and 4: CONTENTSIMPORTANT SAFETY INSTRUCTIO
Page 5 and 6: As the colours of the wires in the
Page 7 and 8: IntroductionFirstly we’d like to
Page 9 and 10: Quick Start Guide Key9
Page 11 and 12: Turn the Main Master Volume control
Page 13 and 14: 4. Plugging in an Acoustic Guitar,
Page 15 and 16: Front PanelInput channelThe GigRac
Page 17 and 18: The FX Bus Output connector could a
Page 19 and 20: (10) Main Master Volume ControlThis
Page 22 and 23: the Gigrac and allows the playback
Page 24: Rear Panel3(1) Power Switch2 1This
Page 29 and 30: Block Diagram29
Page 31 and 32: SpecificationsNOISEEIN 150 ohms 20

Gigrac 1000st User Guide English - Soundcraft

Create successful ePaper yourself

Delete template?

Save as template?