Improvised Munitions Handbook (Improvised Explosive Devices or ...
Improvised Munitions Handbook (Improvised Explosive Devices or ... Improvised Munitions Handbook (Improvised Explosive Devices or ...
1. 2. Mix 1/2 cup of salt into the one gallon glass jar with 3 liters (3 quarts) of water. Add 2 teaspoons of battery acid to the solution and stir vigorously for 5 minutes.
3. 4. Strip about 4 inches of insulation from both ends of the 2 wires. With knife and sticks shape 2 strips of wood 1 x 1/8 x 1-1/2. Tie the wood strips to the lead or carbon rods so that they are 1-1/2 inches apart. 5. Connect the rods to the battery in a motor vehicle with the insulated wire.
- Page 15 and 16: 6. 7. Place screening over dry buck
- Page 17 and 18: 6. Caution: Do not overheat or wet
- Page 19 and 20: 4. 5. Place the aluminum metal on t
- Page 21 and 22: 1. 2. 3. Spread a handful of the am
- Page 23 and 24: Mixing container (bowl, bucket, etc
- Page 25 and 26: Mixing container (wide bowl, can, e
- Page 27 and 28: 2. 3. 4. 5. If available, add the f
- Page 29 and 30: Materials Required Source Field gra
- Page 31 and 32: e detonated with a commercial #8 or
- Page 33 and 34: 1.12 Methyl Nitrate Dynamite A mois
- Page 35 and 36: 8. Add an equal quantity of water t
- Page 37 and 38: Water Tape Blasting cap Steel pipe
- Page 39 and 40: 4. Filter mixture as in step 2. Ure
- Page 41 and 42: 1. 2. 3. Place 10 grams of copper p
- Page 43 and 44: 7. 8. Filter the solution through a
- Page 45 and 46: 4. 5. Filter the mixture through a
- Page 47 and 48: 3. 4. Caution: Keep solution away f
- Page 49 and 50: Materials Required Source Drugstore
- Page 51 and 52: Water Pan Procedure 1. 2. 3. Mix 12
- Page 53 and 54: milliliters) of hot water each time
- Page 55 and 56: 6. 7. 8. 9. 10. Filter the mixture
- Page 57 and 58: 1. Weigh 2 grams each of picric aci
- Page 59 and 60: Rod (glass or wood) Glass container
- Page 61 and 62: 7. 8. Heat canning jar of sulfuric
- Page 63 and 64: 1. 2. 3. 4. Dilute 2-1/4 teaspoons
- Page 65: Caution: Handle dry explosive with
- Page 69 and 70: 1.24 Mercury Fulminate Mercury fulm
- Page 71 and 72: 6. 7. Wash the crystals with 6 teas
- Page 73 and 74: 3. Pour mixture into pipe. 4. Inser
- Page 75 and 76: 2. Screw pipe cap to one and of pip
- Page 77 and 78: 2. Tape, tie or glue one or two row
- Page 79 and 80: 2. Ignite the string and allow to b
- Page 81 and 82: 2.4 Grenade-Tin Can Land Mine This
- Page 83 and 84: Materials Required Iron pipe approx
- Page 85 and 86: 2. Connect firing leads to battery
- Page 87 and 88: 1. Place plug in mouth of bottle. 2
- Page 89 and 90: 1. Crimp cap around fuse. Caution:
- Page 91 and 92: c. d. e. f. Place large pipe on fla
- Page 93 and 94: Funnel(s) (glass, steel, or aluminu
- Page 95 and 96: Material Funnels inches metric inch
- Page 97 and 98: 1. If pipe is used: a. Place the pi
- Page 99 and 100: Caution: Do not place blasting cap
- Page 101 and 102: 3. Drill a 25/64 inch (1 cm) diamet
- Page 103 and 104: Note: If 9/16 inch drill is not ava
- Page 105 and 106: . Release strap. 3. To Remove Shell
- Page 107 and 108: lacquer after each layer. 6. Drill
- Page 109 and 110: 3. Attach a long cord to the firing
- Page 111 and 112: 2. Pour shot from shell. 3. Replace
- Page 113 and 114: Pipe wrench Shellac or lacquer Elas
- Page 115 and 116: 11. Position metal strap on stock s
1.<br />
2.<br />
Mix 1/2 cup of salt into the one gallon glass jar<br />
with 3 liters (3 quarts) of water.<br />
Add 2 teaspoons of battery<br />
acid to the solution and stir<br />
vig<strong>or</strong>ously f<strong>or</strong> 5 minutes.