DECLARATION OF PERFORMANCE - Basf

7. In case of the declaration of performance concerning a construction product covered by aharmonised standard:The notified body Kiwa Polymer Institut GmbH, identification number 1119, performed the initialinspection of the manufacturing plant and of factory production control and the continuoussurveillance, assessment and evaluation of factory production control under system 2+ andissued:Certificate of conformity of the factory production control1119-CPD-11928. In case of the declaration of performance concerning a construction product for which aEuropean Technical Assessment has been issued:9. Declared performanceEN 1504-2:Table 1: Performance in systemnot relevantEssential characteristicsPerformanceLinear shrinkageNPDCompressive strengthNPDCoefficient of thermal expansionNPDAbrasion resistanceweight loss < 3000 mgCross cutNPDPermeability to CO 2s D > 50 mWater vapour permeabilityClass IIICapillary absorption and permeability to water w < 0,1 kg/(m 2 x h 0,5 )Thermal compatibilityNPDResistance to thermal shockNPDChemical resistanceNPDResistance to severe chemical attack Reduction in hardness < 50 %Crack bridging abilityNPDImpact resistanceClass IAdhesion strength by pull off test≥ 2,0 N/mm²Reaction to fire Class E a)Skid resistanceNPDArtificial weatheringNPDAntistatic behaviourNPDAdhesion on wet concreteNPDRelease of dangerous substancesNPDHarmonisedTechnicalSpecificationEN 1504-2:2004Page 2 of 3CPR - DOP - 419-527 EN.docx

EN 13813:Table 2: Performance in systemEssential characteristicsReaction to firea)E flRelease of corrosive substancesSRWater permeabilityNPDWear resistance AR 0,5Bond strength B 2,0Impact resistance IR 4Sound insulationNPDSound absorptionNPDThermal resistanceNPDChemical resistanceNPDDangerous substancesNPDPerformanceHarmonisedTechnicalSpecificationEN 13813:2002a) According to Commission Decision 2010/85/EU of 9 February 2010 the product fulfills the reaction-to-fire performanceclass E/E fl without further testing10. The performance of the product identified in points 1 and 2 is in conformity with the declaredperformance in point 9. This declaration of performance is issued under the sole responsibilityof the manufacturer identified in point 4.Signed for and on behalf of the manufacturer by:EEEEEEEEEEEEEEEEE..Dr. Thomas RudolphBusiness Director ConstructionEEEEEEEEEEEEEEEEE..Michael WolffTechnical Manager ConstructionHanau, July 01, 2013AnnexAccording to Art. 6 (5) of the Regulation (EU) No. 305/2011 a Safety Data sheet accordingRegulation (EU) No. 1907/2006 (REACH), Annex II is annexed to this Declaration of Performance.Page 3 of 3CPR - DOP - 419-527 EN.docx