1996 Buick Century Owner's Manual

To reinstall the lamp:Guide the latch spring.through the opening inthe metal inner panel.Taillamp Bulb Replacement (Wagon)2.3.Engage the two blades on the lamp into the slots onthe headlamp while engaging the two pins at the rearof the lamp openings into the sockets on the rear ofthe lamp. The lamp is now in place.Insert a screwdriver into the loop on the latch spring.Pull ‘the spring to the rear and slightly center of thevehicle until the detent engages into the notch.Taillamp Bulb Replacement (Sedan)For the type of bulb, see “Replacement Bulbs” inthe Index.Replacing bulbs in the taillamp housing is difficult, andwe recommend that you see your dealer when you needa bulb replaced.YlFor the type of bulb, see “Replacement Bulbs” inthe Index.1. Open the liftgate.2. Remove the three Phillips head. screws.3. Pull the taillamp housing away from the body ofthe vehicle.