1996 Buick Century Owner's Manual

1996 Buick Century Owner's Manual 1996 Buick Century Owner's Manual

wpc.3cdd.edgecastcdn.net
from wpc.3cdd.edgecastcdn.net More from this publisher
12.07.2015 Views

Standard Wheel CoverWire Wheel CoverYou will be using the flat end of the wheel wrench toremove the wheel cover. Pry along the edge of the wheelcover until it comes off.Removing the wire wheel cover requires this wire wheelkey wrench.A. Put the flat end into the notch and carefully pry thesmall center cover off.

Removing the Flat Tire and Installing theSpare Tire1. Using the wheel wrench, loosen all the wheel nuts.Don't remove them yet.B. Remove the theft deterrent wheel nut by placingthe key end of the wire wheel wrench over thenut and turning it to the left. Pull off the wirewheel cover.C. Next, attach the wheel wrench to the bolt on the endof the jack. Raise the jack a little by rotating thewheel wrench clockwise (to the right).2. Position the jack under the vehicle nearest thetire to be changed. The jack location should beapproximately 5 inches (12.7 cm) from thewheel well.5-29

Standard Wheel CoverWire Wheel CoverYou will be using the flat end of the wheel wrench toremove the wheel cover. Pry along the edge of the wheelcover until it comes off.Removing the wire wheel cover requires this wire wheelkey wrench.A. Put the flat end into the notch and carefully pry thesmall center cover off.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!