2 way ball valve 022502 - Fluid Process Control

More documents

Recommendations

Info

Ball Valves - 2-Way Series (1/2” Orifice)Pressures to 10,000 psi (690 bar) .500” (12.7mm) OrificeMAWP @ Minimum OrificeConnection Room Temperature Inches (mm)SF750CX20 10,000 psi (690 bar) .500 (12.70)SF1000CX20 10,000 psi (690 bar) .500 (12.70)3/4” NPT 10,000 psi (690 bar) .500 (12.70)1” NPT 10,000 psi (690 bar) .500 (12.70)Valve Cv=10.20MAWP: Maximum Allowable Working PressureSTAINLESS STEEL HANDLEPRESSURE TEMPERATURE RATINGSONE PIECE BALLAND STEMSTOPPING DEVICEPACKING GLANDTEMPERATURE ˚C(-18) (38) (93) (150) (204) (260)15,000(1034)THRUST WASHERSPRING ENERGIZED SEALLOCKNUTLOCKING PIECEPEEK SEATSSEAT GLANDPRESSURE PSIG10,0005,000NPT & SF CONNECTIONS(690)(345)PRESSURE BARPEEK BEARINGVITON O-RINGSEAT RETAINER0100 200 300 400 500TEMPERATURE ˚F*pressure ratings are determined by the end connections chosen, see chart.NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.Ordering ProcedureFor complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete withtube or pipe connections.Typical catalog number: 2B 8 S 10 M1262BValveSeries2B: 2-way8S10M12XXXBallMaterialPressureEndOptionsOrifice(X 1000 psi)ConnectionS -316SSDiameterM12 - SF750CX20 HT - High Temperature(For material options8-1/2”(See Chart on next (Ball Valve Acutators,contact factory)(12.7 mm)page)see next page.)All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection OptionsCatalog End Connection MAWP @ HexNumber Number Connection Room Temperature Inches(mm)2B8S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.75 (44.5)2B8S10M16 M16 SF1000CX20 10,000 psi (690 bar) 1.75 (44.5)2B8S10P12 P12 3/4” NPT 10,000 psi (690 bar) 1.75 (44.5)2B8S10P16 P16 1” NPT 10,000 psi (690 bar) 1.75 (44.5)MAWP: Maximum Allowable Working PressureSee ball valve option/details section for end connection details, material, and high temperature options.Ball Valve OptionsPneumatic ActuatorAO - Air-to-open/Spring to closeAOC - Air-to-open-and-close (double action)Electric ActuatorEO1 - 120 volt AC 50/60 HzEO2 - 220 volt AC 50/60 HzActuator Operating Temperature:Pneumatic: -20˚F to 175˚F (-29˚C to 79˚C)Electric: -20˚F to 160˚F (-29˚C to 71˚C)Valve MaintenanceRepair Kits: add “R” to the front of valve catalog first 4numbers for proper repair kit.(Example: R2B8S)Consult your Autoclave representative for pricing on repairkits. Refer to the Operation and Maintenance manual forproper maintenance procedures.High Temperature Option:HT - for media temperature up to 500˚F (260˚C)See ball valve Actuator section for full description,additional information, and options.All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.7
Page 1 and 2: Ball Valves - 2-Way SeriesBall Valv
Page 3 and 4: End Connection OptionsCatalog End C
Page 5: End Connection OptionsCatalog End C

2 way ball valve 022502 - Fluid Process Control

Create successful ePaper yourself

Delete template?

Save as template?