Pressure transducer with amp. PA-800
Pressure transducer with amp. PA-800
Pressure transducer with amp. PA-800
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CO<strong>PA</strong>L ELECTRONICSPRESSURE TRANSDUCERS WITH AMP.<strong>PA</strong>-<strong>800</strong>INTERNAL STRUCTURE<strong>PA</strong>-<strong>800</strong>2<strong>Pressure</strong>15 34FEATURES● High corrosion resistance by double diaphragm structure● Built-in <strong>amp</strong>lifier circuit● Built-in temperature compensation function(0 ~ 50 °C)● Voltage output mode1234Part nameStainless steel diaphragmSealed liquid“O” ring (P18)Sensor chipMaterialSUS 316LSilicone oilFluoro-rubberSilicone5FittingSUS 316MODEL NUMBER DESIGNATION<strong>PA</strong>-<strong>800</strong> - 102 G - 05Series nameRated pressure range1020 ~ 98.1 kPa {0 ~ 1 kgf/cm 2 }3520 ~ 343 kPa {0 ~ 3.5 kgf/cm 2 }1030 ~ 981 kPa {0 ~ 10 kgf/cm 2 }<strong>Pressure</strong> referenceGGaugeVGauge (Vacuum)Thermal error05± 0.05 % F.S./°C10± 0.1 % F.S./°CLIST OF MODEL NUMBERSOutputVoltage outputThermal error<strong>Pressure</strong> referenceRated pressure rangekPa {kgf/cm 2 }± 0.05 % F.S./°C± 0.1 % F.S./°CGauge0 ~ 98.1 0 ~ 343 0 ~ 981 0 ~ − 98.1{0 ~ 1} {0 ~ 3.5} {0 ~ 10} {0 ~ − 1}<strong>PA</strong>-<strong>800</strong>-102G-05 <strong>PA</strong>-<strong>800</strong>-352G-05 <strong>PA</strong>-<strong>800</strong>-103G-05 <strong>PA</strong>-<strong>800</strong>-102V-05<strong>PA</strong>-<strong>800</strong>-102G-10<strong>PA</strong>-<strong>800</strong>-352G-10<strong>PA</strong>-<strong>800</strong>-103G-10<strong>PA</strong>-<strong>800</strong>-102V-10Verify the above model numbers when placing orders. Specifications are subject to change <strong>with</strong>out notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
CO<strong>PA</strong>L ELECTRONICS<strong>PA</strong>-<strong>800</strong>PRESSURE TRANSDUCERS WITH AMP.STANDARD SPECIFICATIONSK Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation voltage of 12 V DC.<strong>PA</strong>-<strong>800</strong>Item Model number102G 102V 352G 103GGeneral specifications<strong>Pressure</strong> referenceRated pressure rangeMaximum pressureBreak-down pressureOperating temp. rangeCompensated temp. rangeOperating humidityStorage temp.<strong>Pressure</strong> mediumInsulation resistanceDielectric strengthkPa {kgf/cm 2 }kPa {kgf/cm 2 }kPa {kgf/cm 2 }°C°C%RH°CMΩminimumGauge98.1 − 98.1 343 981{1} {−1} {3.5} {10}196 686 1961{2} {7} {20}294 1030 2942{3} {10.5} {30}− 20 ~ 700 ~ 5035 ~ 85No condensation− 20 ~ 80Atmospheric pressure, humidity 65 %RH maximumCorrosive gases/liquids compatible <strong>with</strong> SUS 316L or SUS 316100 (500 V DC)500 V AC, 60 sLeakage current 1 mA maximumSealed liquidSilicone oil<strong>Pressure</strong> portG 3/8 (PF 3/8)Net weightgApprox. 125Supply voltage V DC12 ~ 24 ± 10 %PowerRipple contentConsumption currentmaximummAmaximum10 % (P-P)20Output voltageV DC1 ~ 5Zero voltageV1 ± 0.04 (at 25 °C)Analog outputSpan voltageOutput currentLinearity/HysteresisThermal error0 ~ 50 °C(Reference temp.: 25 °C)Supply voltage effectResponseVmAmaximum%F.S.ZERO%F.S./°CS<strong>PA</strong>N%F.S./°CVmaximumms4 ± 0.04 (at 25 °C)1Load resistance 5 kΩ minimum± 0.3 ± 0.5± 0.05/± 0.1± 0.05/± 0.1± 0.1Approx. 2Gravitational effect(From vertical position to horizontal position)An “O” ring is provided. (P18)%F.S.max.Approx. 0.5 Approx. 0.15 Approx. 0.05 Specifications are subject to change <strong>with</strong>out notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
CO<strong>PA</strong>L ELECTRONICS<strong>PA</strong>-<strong>800</strong>PRESSURE TRANSDUCERS WITH AMP.ENVIRONMENTAL CHARACTERISTICSTest item Test conditions (At 25 ± 5 °C) Permissible changeVibrationShock<strong>Pressure</strong> cycling10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s 2 ,3 directions for 2 hours each981 m/s 2 , 3 directions for 3 times each0 ~ Rated pressure, 10 6 cyclesZero voltage, Span voltage:± 1 %F.S. maximum eachMoisture resistance40 °C, 90 ~ 95 %RH, 240 hrs.OUTLINE DIMENSIONS● <strong>PA</strong>-<strong>800</strong>Gauge typeφ 2827(50.2)Housing11 11 28.2 Aluminium <strong>with</strong>( )alumite finishUnless otherwise specified, tolerance : ± 0.5 (Unit: mm)<strong>PA</strong>-<strong>800</strong>Wire colorRedWhiteGreenBlackShieldConnectionPower BOutputN.C.CommonFittingZERO S<strong>PA</strong>NStainless steel diaphragm (SUS 316L)Span adjustment VRG 3/8 (PF 3/8)(SUS 316)“0” ring P 18Fluoro – rubber( φ 3.6) AWG264-core shielded cable L = 600 +1000Zero adjustment VRExtra care should be taken <strong>with</strong> the diaphragm part. Do not touch the diaphragm directly to avoid damaging the diaphragm.INTERNAL ELECTRICAL SCHEMATICS<strong>Pressure</strong>SensorMain circuitPower BOutputCommonShield Specifications are subject to change <strong>with</strong>out notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Change language