Ankerbolt old.pdf - Andrews Fasteners LTD

AnkerboltProduct InformationThe Ankerbolt is a specialy hardened screwwith a double profile thread which cuts itsown thread in the base material.Suitable for use in solid concrete,hollow concrete, bricks, dense blocks andmost natural stone.Features1. Hardened Self-Tapping screw2. Suitable for most materials3. Removable4. Wide range of sizesRange DataPart No. Thread Anchor Hole Maximum Fixture Embedment. Hole Minimum RecommendedDiam Length Diam Fixture Clearance Depth Depth Structure TighteningThickness Hole Thickness Torquemm mm mm mm mm mm mm mm NmJAB06050502065JAB06075 75 457 30 35 60 15JAB0803030525 35JAB08050 50 206030 40JAB08075 75 45JAB08100 100 70JAB08130 130 10045 55 100JAB08150 8 150 6 120 1025JAB08050CS 50 20JAB08075CS 75 4530 40 60JAB08100CS 100 70JAB08130CS 130 10045 55 100JAB08150CS 150 120JAB100606020JAB10075 75 35108JAB10100 100 6012 40 55 90 40JAB10150 150 110JAB120606010JAB12075 75 251210JAB12100 100 5014 50 70 110 60JAB12150 150 100JAB14075JAB14100751001540JAB14130 14 130 12 70 16 60 85 125 80JAB14150 150 90JAB14200 200 140JAB18100JAB18150 18100150 162070 20 80 105 140 100JAB18200 200 120Position Fixture and drillcorrect Diameter Hole tocorrect DepthRemove all dust byBrushing and BlowingInsert Ankerbolt through fixtureand screw down using adownward pressureTighten Ankerbolt toRecommended TorqueTECHNICAL HELPLINE 020 8546 6545

Performance Data (20/25 Concrete)Outside Characteristic Design Recommended Spacing Edge DistanceDiam Resistance Resistance Loadmm kN kN kN mm mmTensile Shear Tensile Shear Tensile Shear Tensile & Shear Tensile Shear6 3.0 5.8 1.4 4.6 1.0 3.3 90 45 608 6.0 6.3 2.7 5.0 1.9 3.6 100 50 8010 9.0 15.0 4.1 12.0 2.9 8.6 120 60 9012 13.5 25.0 6.1 20.0 4.4 14.3 170 80 12014 19.5 33.8 8.9 27.0 6.3 19.3 200 90 14018 26.4 42.5 12.0 34.0 8.6 24.3 260 120 160Shear Loads towards a free edge are for single anchors where Spacing ≥ 3 x Edge DistanceReduced Design ResistanceAnkerboltDivide Loads by 1.4 for Recommended (Factored) LoadsEdge Distance (C20/25 Concrete) for single anchorsSpacing (C20/25 Concrete)Edge Tensile Resistance Shear Resistance Spacing Tensile Resistance per Pair of Anchorsmm M6 M8 M10 M12 M14 M18 M6 M8 M10 M12 M14 M18 mm M6 M8 M10 M12 M14 M1835 1.2 40 1.040 1.3 3.1 45 1.1 2.045 1.4 1.8 3.5 2.8 50 1.1 2.050 1.9 3.8 3.1 6.7 55 1.1 2.1 3.055 2.0 2.7 4.2 3.4 7.3 60 1.2 2.2 3.160 2.1 2.8 3.9 4.6 3.8 8.0 10.0 70 1.2 2.3 3.2 4.370 2.3 3.1 4.2 4.4 9.3 11.7 80 1.3 2.4 3.4 4.580 2.5 3.3 4.6 5.0 10.7 13.3 90 1.4 2.6 3.6 4.790 2.7 3.6 4.9 6.0 12.0 15.0 17.4 100 2.7 3.8 4.8 6.7100 3.8 5.2 6.3 16.7 19.3 120 4.1 5.2 7.1 8.8110 4.1 5.6 6.7 8.0 18.3 21.2 130 5.4 7.3 9.0120 5.9 7.1 8.4 20.0 23.1 140 5.6 7.6 9.2125 6.1 7.3 8.6 24.1 26.6 150 5.7 7.8 9.5130 7.4 8.8 25.1 27.6 160 5.9 8.0 9.7140 7.8 9.2 27.0 29.8 170 6.1 8.2 9.9150 8.2 9.6 31.9 180 8.5 10.2160 8.5 10.0 34.0 200 8.9 10.6170 8.9 10.4 220 11.1190 11.2 240 11.5200 11.6 260 12.0210 12.0Influence of concrete strengthConcrete Strength C20/25 C25/30 C30/37 C40/50 C50/60Cylinder N/mm² 20 25 30 40 50Cube N/mm² 25 30 37 50 60Factor 1.00 1.10 1.22 1.41 1.55When using concrete factors check all other information to ensure Steel Stength and Pull out Resistance is not exceededSteel Design Resistance for single anchorM6 M8 M10 M12 M14 M18Tension kN 4.9 8.7 13.9 20.3 29.3 49.2Shear kN 4.6 5.0 12.0 20.0 27.0 34.0Anchor mechanical propertiesM8 M10 M12 M16 M20 M24Tensile Strength N/mm² 800 800 800 800 800 800Yield Strength N/mm² 600 600 600 600 600 600Nut A/F mm 13 17 19 24 30 36Washer Diam. mm 16 21 24 30 37 44TECHNICAL HELPLINE 020 8546 6545