4"12-Z 1 - part - usaid
4"12-Z 1 - part - usaid 4"12-Z 1 - part - usaid
WORLD CLASS FAMILY OF ELECTRONICS • .' • HPS 3000 Field Interface (NEMA 4X Non-hazardous Enclosure) eRE 3000 Control Room Electronics Module Optional MPS 3000 MultJprobe Test Gas Sequencer HPS 3000 Field Interface (explosion-Proof EnclOsure)
SPECIFICATIONS CD OXYGEN SENSING EQUIPMENT 'robe lengths, nominal. 18 Inches. 3 feet. 6 feet, 9 feet, 12 feet depending upon duct dimensIOn Probe material of constructIOn: 316 LSS (all wetted parts) Temperature limits for probe In process measurement area' 50 to 1300°F (10 to 700°C) Cell speed of response 1 millisecond Probe reference air flow (optional) 2 SCFH clean. dry Instrument quality air (20 95% 02) Reference air set supplied as standard CRE 3000 CONTROL ROOM ELECTRONICS Ambient environment requirements Clean. Dry Ambient temperature range. 40 to 120°F (4 to 50°C) Vibration: Slight: 30 degree drop test Number of probes B maXimum, expandable to 16 with slave CRE 3000 Communications. 1 RS 232 for communication with slave CRE 3000 (max 50 feet (15m) Analog outputs 2-12 Isolated outputs 0-20 mADC. 4-20 mADC Into 950 ohm max, 0-10 VDC Into 2K ohm min 02 indication (analog output) ±O 1% 02 or ±3% of reading. Whichever IS greater Power supply' 11 0/115/220V ± 10% Vac at 50/60 Hz 'ower requirements 100 VA HPS 3000 FIELD INTERFACE Electrical claSSification. NEMA 4X (IP65) Optional - Class 1, DIVISion 1, Group 8 Humidity range: 95% Relative Humidity Ambient temperature range: -20 to 140°F (-30 to 60°C) Vibration: 5 mlsec', 10 to 500 xyz plane External electrical nOise. Minimum Interference Cabling distance between HPS 3aaa and probe. MaXimum 150 feet (45 m) Cabling Distance between HPS 3000 and CRE 3000. MaXImum 1200 feet (3S4 m) ApprOXimate shlppmg weight 12 pounds (5 44 kg) Power supply 100/115/220V 1"10% Vac at 50/S0 Hz Power reqUirements' 200 VA
- Page 2 and 3: • • W 0 5906-02 • Delivery Or
- Page 4 and 5: • • • • • • • • •
- Page 6 and 7: • • • • 5906-01/02AIBURSHTY
- Page 8 and 9: • • • • • • • • 590
- Page 10 and 11: • • • furnace is dIvided into
- Page 12 and 13: • • The station has had sIgnifi
- Page 14 and 15: Flue gas samples were also taken at
- Page 16 and 17: 4.2.2 Power Plant AudIts The audIt
- Page 18 and 19: Ifonly a modest savings of about 0.
- Page 20 and 21: ECO-06 MAZUT SONIC FLOW METERS The
- Page 22 and 23: DESCRIPTION COST 2. SIlica Analyzer
- Page 24 and 25: 6.0 IMPLEMENTATION PHASE (Follow-up
- Page 26 and 27: earings, contacts, etc The electric
- Page 28 and 29: • • • BURSHTYN COAL CONSUMPTI
- Page 34 and 35: DelIvery Order #06 Task 2 Power Pla
- Page 36 and 37: 5906-011Cf2A/APPENDIX/4/18/95 APPEN
- Page 39 and 40: Simple Payback for O2 Analyzers - 1
- Page 41 and 42: 5906-01l02A/APPENDIX/4/t8/95 APPEND
- Page 45: Reference air tstrmg Zircoma substr
- Page 53: .- The 1261 Calorimeter Operates in
- Page 58 and 59: 14 The 1750 Proximate Analyzer A ra
- Page 68: 5906-01/C12A1APPLNDIX/4/18/95 APPEN
- Page 79 and 80: • • • • • BURSHTYN COAL Q
- Page 81: • • • • Polsky Coal Pure Pr
- Page 86: l,rJ., I BURSTHYN 1994 Jan Feb Mar
- Page 91 and 92: 5906-01I02A1APPENDIX/41l8/95 APPEND
- Page 93: 5906-01/fJ2A/APPENDIXJ41l8/95 APPEN
SPECIFICATIONS CD<br />
OXYGEN SENSING EQUIPMENT<br />
'robe lengths, nominal. 18 Inches. 3 feet. 6 feet, 9 feet, <strong>12</strong> feet<br />
depending upon duct dimensIOn<br />
Probe material of constructIOn: 316 LSS (all wetted <strong>part</strong>s)<br />
Temperature limits for probe In<br />
process measurement area' 50 to 1300°F (10 to 700°C)<br />
Cell speed of response 1 millisecond<br />
Probe reference<br />
air flow (optional) 2 SCFH clean. dry Instrument quality air<br />
(20 95% 02) Reference air set supplied<br />
as standard<br />
CRE 3000 CONTROL ROOM ELECTRONICS<br />
Ambient environment requirements Clean. Dry<br />
Ambient temperature range. 40 to <strong>12</strong>0°F (4 to 50°C)<br />
Vibration: Slight: 30 degree drop test<br />
Number of probes B maXimum, expandable to 16 with slave<br />
CRE 3000<br />
Communications. 1 RS 232 for communication with slave CRE<br />
3000 (max 50 feet (15m)<br />
Analog outputs 2-<strong>12</strong> Isolated outputs 0-20 mADC. 4-20 mADC<br />
Into 950 ohm max, 0-10 VDC Into 2K ohm min<br />
02 indication<br />
(analog output) ±O 1% 02 or ±3% of reading. Whichever<br />
IS greater<br />
Power supply' 11 0/115/220V ± 10% Vac at 50/60 Hz<br />
'ower requirements 100 VA<br />
HPS 3000 FIELD INTERFACE<br />
Electrical claSSification. NEMA 4X (IP65) Optional - Class 1,<br />
DIVISion 1, Group 8<br />
Humidity range: 95% Relative Humidity<br />
Ambient temperature range: -20 to 140°F (-30 to 60°C)<br />
Vibration: 5 mlsec', 10 to 500 xyz plane<br />
External electrical nOise. Minimum Interference<br />
Cabling distance between<br />
HPS 3aaa and probe. MaXimum 150 feet (45 m)<br />
Cabling Distance between<br />
HPS 3000 and CRE 3000. MaXImum <strong>12</strong>00 feet (3S4 m)<br />
ApprOXimate shlppmg weight <strong>12</strong> pounds (5 44 kg)<br />
Power supply 100/115/220V 1"10% Vac at 50/S0 Hz<br />
Power reqUirements' 200 VA<br />
Change language