wltl21280 - weslo cadence dl5 - Fitness Equipment

*WLTL21280-146358 5/4/00 11:24 AM Page 5ASSEMBLYSet the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials untilassembly is completed. Refer to the drawings below to identify small parts used in assembly. Assembly requiresan adjustable wrench(not included).3/8" x 1" Bolt (18)Ð13/8" x 1 1/2" Washer(28)Ð15/16" Washer (26)Ð2Flange Nut (48)Ð25/16" x 2 3/4" Bolt (49)Ð23/8" x 1 3/4" Bolt (2)Ð21. Raise the Upright (11) to the vertical position. Insert the 3/8Ó x 1ÓBolt (18), with the 3/8Ó x 1 1/2Ó Washer (28), into the lower endof the Upright. Finger tighten the Bolt into the Frame (59).1111828592. Hold the upper end of the Right Handrail (10) under theConsole (3). Insert a 3/8Ó x 1 3/4Ó Bolt (2) up into the Handrail,and finger tighten the Bolt into the plate under the Console.23Attach the Left Handrail (1) in the same manner.12103. Insert a 5/16Ó x 2 3/4Ó Bolt (49), with a 5/16Ó Washer (26),through the lower end of the Right Handrail (10) and into theFrame (59). Reach under the Frame and tighten a Flange Nut(48) onto the Bolt.Attach the Left Handrail (not shown) in the same manner.Tighten all bolts used in steps 1 and 2.348261049594. Remove the paper backing from the Adhesive Clip (64). Pressthe Adhesive Clip onto the Left Endcap (67) in the indicated location.Press the Allen Wrench (65) into the Adhesive Clip.4676564