Answer Solutions Specification Guide - OEC Business Interiors

Interface ProductsBase Power Infeed.Base power infeedconnects power in thebuilding floor to a powerkitin the base of a panel.Infeed occupies onereceptacle opening.cSpecifying, page 337Connector on end ofbase power infeed harnessoccupies one receptaclelocation in power block.Flexible harness makeshardwired connection tobuilding monument. Theharness must be backfedthrough the base trim priorto connection into thebuilding monument.Cover is included with basepower infeed to conceal theconnection..Wiring & CablingConnector on basepower infeed must beplaced behind panel basetrim and harness must bebackfed through base trimopening prior to an electricianmaking the connectionto power in the buildingfloor.Three wiring schematicsare available—3+1,2+2, and three circuits withseparate neutrals (3SN).All the components in anelectrical distribution systemmust use the same wiringschematic. For safety thecomponents are keyed,labeled, and color-coded tomake it impossible to connectmismatched parts.cPage 69All Answer electricalcomponents are listedby Underwriters Laboratory(UL) and certified by theCanadian StandardsAssociation (CSA).Local electrical codesvary. Consult a qualifiedelectrical contractor or engineerfor the proper installationof all electricalcomponents..80 Answer Solutions Specification Guide