Answer Solutions Specification Guide - OEC Business Interiors

Stability Guidelines.Guidelines for Answer Off-Module Bracket Configurations, continuedSpineNo trimavailableFinWall start junctionmust match the fin panelheight coming off the spinewall. Change-of-height trimis not available to coverexposed wall start junction.12" maxAlways use standardworksurface end panels,center supportpanels, or cantileversin on-module locations,even if the worksurfaces areplaced in an off-moduleposition. The worksurfacecan overhang a panelmountedsupport by a maximumof 6". If the worksurfaceoverhangs more than6", additional freestandingsupports are required.8' or lessLoading on spine wallwith change-of-heightoff-module fin is allowedwith a maximum of 12"height difference betweenspine and fin. No loadingon spine is permitted if thespine is 24"H or higher thanthe off-module fin. End panelsor a pedestal with a filleris required to support aworksurface attached tospine..PanelsAnswer Solutions Specification Guide cStability Guidelines, continued 61