Answer Solutions Specification Guide - OEC Business Interiors

Fence ConnectorFence ConnectorFence connectorsattach Post and Beamperpendicular to Answerpanels forming a fin wallsupport.cSpecifying, page 333Connector engages in thevertical slot. The connectoris handed to make thisattachment on either theleft- or right-hand side ofthe frame.Minimum beam lengthis 48". Maximum beam lengthis 120".Actual DimensionsDepth 2"Width 1 3 ⁄8". Height 32 1 ⁄2".Product DetailsConnector occupies verticalslots in the frame 32 1 ⁄2"measured up from the bottomedge of the base trim.ConnectionsFence connector ismounted within the modulewidth of the frame. Horizontalspace within that frame isreduced by 1 1 ⁄2".Width of panel-mountedworksurfaces is affectedby this change in module.Monolithic skins andlower segmented skinsup to 32 1 ⁄2" measured fromthe bottom of the base trim,are trapped by the fenceconnector once installed onthe panel frame. Base trimis not trapped.Cantilevers cannotoccupy the same verticalslots as the fence connectorbracket.Fence connector cannotbe used when panels arestacked and loaded withbins and shelves..Tether brackets canbe used to side supportworksurfaces.Use of tether bracketsas side supports furtherreduces horizontal spaceavailable by 1 1 ⁄2" each sideand affects planning ofmounted worksurfaces.Surface MaterialsFence connector• 8043 Clear Anodizedaluminum onlyPost top cap• 6694 Slate plastic only.PanelsAnswer Solutions Specification Guide 45