Answer Solutions Specification Guide - OEC Business Interiors

Canopy LightsCanopy Lights.cSpecifying, page 542Actual DimensionsDepth 7 1 ⁄16"Width 24 1 ⁄4", 36 1 ⁄16", or 47 7 ⁄8"Height 3 13 ⁄16"Housing is paintedor clear anodizedaluminum.Bullet-shaped electronicdimming switch,when selected, is locatedon the left side, underneaththe control box.On-off switch is centeredon the bottom of the controlbox in the front.Plug is flat so it remainsclose to the receptacle.Cord exits from underneaththe center of the control box.9' cord with grounded plugis factory installed. Lengthis maximum allowed byU.S. National ElectricalCode. Cord with circuitbreaker is available to meetthe requirements of theChicago code..Product DetailsCanopy light includes thelamp, ballast, and either a9' cord with three-prongplug or Chicago plug.45°Plug configurationallows two canopy lights toengage adjacent outlets inone receptacle.Energy-saving T5lamps have triphosphorcoating for balanced colorand pleasing light.Optics include a crescentshapedlens with specularaluminum reflector that provideslow glare and broaddistribution of light.ConnectionsStandardBracketsAnswer, Avenir, andSeries 9000 bracketsare provided for use on panels.These brackets also willattach to many competitors’systems as well.Elective Elementsbrackets are optionaland can be specified toattach canopy lights toElective Elements panels.Montage brackets areoptional and can be specifiedto attach canopy lightsto Montage frames in thesame position used foroverhead storage.Additional bracketsare optional for use onpanel-type competitiveproducts..Width Lamp Lamp Replacementwidth wattage lamps24 1 ⁄4" 21 3 ⁄5" 14 watts F14T5\83536 1 ⁄16" 33 2 ⁄5" 21 watts F21T5\83547 7 ⁄8" 45 1 ⁄5" 28 watts F28T5\835OptionalBracketsRiserSlatwall mountingRiser is available to attachbrackets are optional andcanopy lights to Detailscan be specified to attach toWorkFlo rail. For more infor-Answer slatwall, Montagemation about WorkFlo rails,slatwall tiles, and Pathwayscall Details Customerslatwall skins.Alliance at 1.800.833.0411.Riser may also be used withEllipse rail attached to aworksurface.Wiring & CablingElectronic ballast ismore energy efficient thanT8 electronic ballasts.Electronic dimmingcontrol features slidingswitch, which allows con-Architectural bracketstinuous-range dimming fromare optional for mounting100% to 50% light output.on drywall.Application TopicsCanopyLightPanelSeamCord manager clipsecures power cord alongback of fixture to allow it toreach a vertical wire manageror panel seam.Surface MaterialsHousing• Paint• Clear anodized aluminumBracket must always be Reflectorinstalled on panel seams. • Specular (reflective)Brackets can be flush with aluminumends of canopy light or light Cordcan extend past bracket on • Black vinyl onlyone side or both sides.End caps and control box• Sterling plastic onlyBrackets..• Sterling paint onlyLightingAnswer Solutions Specification Guide 295