Answer Solutions Specification Guide - OEC Business Interiors

Steel Panel SkinsSteel Panel Skins.Steel panel skins finishthe appearance of a panel.Skin combinations can varyto accommodate a varietyof appearances and functionsof the workspace.cSpecifying, page 322Actual DimensionsWidth 17 53 ⁄64", 23 53 ⁄64", 29 53 ⁄64", 35 53 ⁄64", 41 53 ⁄64", 47 53 ⁄64",59 53 ⁄64", and 71 53 ⁄64"(453 mm, 605 mm, 758 mm, 910 mm, 1062 mm,1215 mm, 1520 mm, and 1824 mm)Height 12 23 ⁄64", 24 3 ⁄4", 37 5 ⁄64", 49 7 ⁄16", and 61 13 ⁄16"(314 mm, 704 mm, 942 mm, 1256 mm, and1570 mm)Perforated option isavailable on 12"H and 24"Hpanels only. Horizontalbeam and back of oppositeskin is visible throughperforated skin.Steel skins can beremoved and repositioned.They are not dedicated toa specific location.Ribbed option is availableon 12"H and 24"Hpanels only..ConnectionsSkins extend onto junctionand meet skin of adjacentpanel. The slotted channelof the junction is accessiblebetween these two skins.Skins are not dedicated toa specific location.Wiring & CablingPower and communicationcannot be accessedin steel skins.Surface MaterialsSkins• Painted steel• Ribbed steel (option)• Perforated steel (option)Application TopicsPanel buildupscPage 15Horizontal connectingbars will be visible whenperforated skins are used onthe panel.When specifying theperforated option, orderperforated skins for bothsides of the panel to maximizethe visual aesthetic.Perforated skins cannotbe used in installation withsteel or ribbed steel skinsmade prior to July 10, 2000..PanelsAnswer Solutions Specification Guide 29