Answer Solutions Specification Guide - OEC Business Interiors

Answer Overhead Binsand Shelves.Oval pull can be specifiedas an option on overheadbin doors..ConnectionsSteel support hookson end supports insert intothe slotted channel of apanel or wall channel andlock into place with a safetycatch.Width of overhead binor shelf must match thewidth of the panel or panelsthat it is attached to.Additional support forstability may be requiredwhen overhead bins andshelves are attached topanels. Counterbalancingloads on opposite sides ofthe panels increasesstability.cPage 287.Wall channels are availableto attach shelves andbins to concrete or blockwalls. Wall channels can beused to attach shelves, bins,and tackboards to wood, drywall, or plaster walls if thewall is reinforced.cPage 287Horizontal brace isrequired with wall channelsto support shelves and binsthat are wider than 48".cPage 287.Wiring & CablingVertical wire managersare available to concealcords that are routed fromlight mounted beneathoverhead storage.cPage 298Surface MaterialsOverhead bin• PaintFronts• Wood (option)• Customiz stain or full-fillfinish (option on wood)• Fabric (option onsteel door)Oval pull (optionon steel door)• 6000 Black• 6654 Sand (Vanadium)• 6694 Slate• 6695 Midnight• 6697 Fog• 6698 FieldstoneLock• 9201 Polished ChromeShelves• Paint.Application TopicsClearance betweenworksurface and bottom ofoverhead bin is 20 5 ⁄8" whenstorage unit is installed inthe highest position on a66"H panel.Answer StorageCapacities andDimensionscPage 289Brackets are availableto allow Avenir overheadbins, and half-height andfull-height shelves manufacturedsince May 1997, toconnect to Answer panels.Do not stack on top of Avenirbins when using thesebrackets..20 5 /8"ClearanceStorageAnswer Solutions Specification Guide 285