Answer Solutions Specification Guide - OEC Business Interiors

Answer Underworksurface Lateral FilesLateral files rest onthe floor and supportworksurfaces.cSpecifying, page 530Top is open but covered byworksurface when installed.Lock is standard on lateralfiles. It controls all thedrawers in the lateral file.Products with locks shipwith a lock face ring andremovable plastic plug toaccommodate a lock cylinderinstalled on site. Lockcylinders must be specifiedseparately.cLock and KeyingOptions, page 616Actual DimensionsDepth18" (457 mm)Width 30" or 36"(762mm or 914 mm)Height27 1 ⁄8"(689 mm)Leveling glide range5⁄8" (16 mm).Leveling glides adjustto install lateral files onuneven floors.Backs and sides arefinished.Pulls on steel drawersare oval shaped. Handleand contemporary pulls areavailable as an option.Drawers are made ofsteel. Top drawer height inall open-top cabinets is10 5 ⁄8". All other drawers are12"H..Product DetailsHanging file folderframe is included in eachopening. Dividers are availablefor side-to-side filing,and rails are available toaccommodate front-to-backfiling. Due to the shortenedheight (10 5 ⁄8") of top drawerin underworksurface lateralfiles, filing options may belimited.Storage accessoriesare available to modifydrawer interiors whenneeded.OvalHandleContemporaryOval pulls are standard onsteel drawer fronts. Handleand contemporary pulls areavailable on both steel andwood fronts..280 Answer Solutions Specification Guide