Answer Solutions Specification Guide - OEC Business Interiors

Universal WorkstationVerticals.Drawer interiors includeone divider per 6"H drawer,while 12"H drawers canaccommodate front-to-backfiling of letter-size hangingfolders without the use ofadditional accessories.However, optional rails anddividers are available for12"H drawers.Tip: Your specificationfor optional 12"H drawerinteriors will apply to all the12"H drawers within a singleworkstation vertical.Rails are available as anoption to accommodateside-to-side filing of letter-,A4 international-, and legalsizehanging folders. Railpackage includes one railper 12"H drawer on 24"Dunits and two rails per 12"Hdrawer on 30"D units.Divider packages areavailable as an option toaccommodate front-to-backfiling of file folders in 12"Hdrawers. Divider packageincludes one divider per12"H drawer..Fixed shelf behind lift-updoor does not include filingaccessories; however, itwill accommodate standardsize binders. Bookendsare available and must bespecified separately.cSee Storage SpecificationGuide.Safety interlock systemallows only one drawerto be opened at a time.Locks are standard andkeyed random on all workstationverticals. Consecutiveand specific keying optionsare available. Master-keyedlocks are also available.Products with locks shipwith a lock face ring andremovable plastic plug toaccommodate a lock cylinderinstalled on site. Lockcylinders are intended forinstallation after the furnitureis installed in order to eliminatethe need to keep trackof each furniture unit’s locknumber during installation.Lock cylinders must bespecified separately.cLock and Keying Options,page 616Individual drawer locksare available for applicationswhere you want to limitaccess to each drawer.Workstation verticals includea security shield above eachdrawer to prevent unauthorizedaccess. In 65 1 ⁄2"H towers,the lift-up door iscontrolled by the lock in thedrawer directly below.Exception: Individual drawerlocks are not available ontowers with 6"H drawers..Laminate and woodveneer tops with squareedgeprofiles are available inplace of standard 1"H steeltops. Laminate and woodveneer tops are 3 ⁄16" tallerthan steel tops and will addthat dimension to the overallheight of the workstationvertical.Steel topTop will default to steel onworkstation verticals withproud wood fronts sincethe drawer or lift-up dooroverlaps and conceals thetop. Wood top is availableas an option.3"1 1 /2"Steel top1"HVeneer top1 3 /16"HLaminate top1 3 /16"HProudwoodfront52" or65 1 /2"50 1 /2"or 64"Base is standard 3"H. Todecrease the overall heightof the workstation vertical,a 1 1 ⁄2"H base is available..Cable-routing base is3"H and has access holeson each side and in the top.Cable-routing base can beused to route cords andcables horizontally throughone or more bases.ConnectionsGanging hardware isincluded to increase stabilityand maintain alignment byjoining adjacent componentsside-by-side, back-to-back,or both. Knockouts for makingthese attachments areincluded in the top.Workstation verticals canalso be bolted to the flooror wall for stability.Wood veneerwith squareedge profileLaminatewith squareedge profileField-installed tops areavailable in two choices—wood veneer with squareedge profile and laminatewith square edge profile.Tops can be used on an individualworkstation vertical.cSee Storage SpecificationGuide..3" cablerouting base1 1 /2" baseField-installed basesare available 1 1 ⁄2"H or 3"Hcable-routing.cSee Storage SpecificationGuide.Field-installed accessoriesare available, includingdrawer accessories andshelf bookends.cSee Storage SpecificationGuide.Anchor bracket mountson the inside of the case andsecures the case to the floorthrough the base. Localcodes and interpretationsvary. Consult with localbuilding code officials forspecific code requirementsapplicable to your installation.California Office ofStatewide Health Planningand Development (OSHPD)jurisdictions may requireanchoring for cabinets thatexceed 6' in height..StorageAnswer Solutions Specification Guide cUniversal Workstation Verticals, continued 251