Answer Solutions Specification Guide - OEC Business Interiors

Stacking Horizontal Frame PackagesStacking HorizontalFrame Packages.Stacking horizontalframe package providesstructural stability for stackingjunctions and allowscable routing through eachstacked segment.cSpecifying, page 319Actual DimensionsCable tray is includedwith each stacking horizontalframe package. Cablescan be routed at the top ofeach stacked segment.scale150Width 17 13 ⁄16", 23 13 ⁄16", 29 13 ⁄16", 35 13 ⁄16", 41 13 ⁄16", 47 13 ⁄16",59 13 ⁄16", and 71 13 ⁄16"(452 mm, 605 mm, 757 mm, 909 mm, 1062 mm,1214 mm, 1519 mm, and 1824 mm)Horizontal connectingbar is included with eachstacking horizontal framepackage.Each stacking segmentmust have one horizontalconnecting bar.Exception: If a window kitor a pass thru kit is usedwith stacking junctions, ahorizontal connecting bar isnot needed.Each stacking junctionis specified separately.cPage 319Skins, ordered separately,are added to both sides ofstacking frame..Product Detailsscale 50Stacking horizontalframe package includesone horizontal connectingbar and a cable tray. Stackingjunction is not included.Stacking horizontalframe package is availablein eight widths—18",24", 30", 36", 42", 48", 60", and72"—to match panel width.These horizontal connectingbars are identical to those inhorizontal frame packagesand can be re-used with anytype of junction.ConnectionsQuick-lock mechanismon the horizontal connectingbar engages the stackingjunction in a tight structuralconnection.Base panel must alwayshave two horizontal connectingbars.Wiring & CablingVertical routing of powerand cables through panelinterior is accommodated byopenings in horizontal connectingbars..Feed-through horizontalconnecting barcable sleeves can beadded in the field to finishthe exposed metal edgesof vertical cable passthroughopenings.Power kit installationfor stacking components isthe same process as forinstallation in base panels.Surface MaterialsStacking horizontalframe package• BlackComponents are hiddenwhen properly installed.Application TopicsWhen stacking a 12"Hor 24"H window orpass-thru kit, a stackinghorizontal frame package isnot needed. Remember, thebase panel always has twohorizontal connecting barsfor support.Consolidation point kitcannot be used with stackingcomponents.Stacking horizontalframe package is usedwhen additional horizontalbar is needed in off-moduleapplication. See off-moduleguidelines.Stacking StabilityGuidelines providesdetailed information onapplications.cPage 47.PanelsAnswer Solutions Specification Guide 25