Answer Solutions Specification Guide - OEC Business Interiors

Universal VerticalDrawer Towers.Drawer interiors includeone divider per 6"H drawer,while 12"H drawers canaccommodate front-to-backfiling of letter-size hangingfolders without the use ofadditional accessories.However, optional rails anddividers are available for12"H drawers.Tip: Your specification foroptional 12"H drawer interiorswill apply to all the12"H drawers within asingle tower.Rails are available as anoption to accommodateside-to-side filing of letter-,A4 international-, and legalsizehanging folders. Railpackage includes one railper 12"H drawer on 24"Dunits and two rails per 12"Hdrawer on 30"D units.Divider packages areavailable as an option toaccommodate front-tobackfiling of file folders indrawers. Divider packageincludes one divider per12"H drawer..Fixed shelf behind lift-updoor does not include filingaccessories; however, itwill accommodate standardsize binders. Bookendsare available and must bespecified separately.cSee Storage SpecificationGuide.Doorhingedon leftDoorhingedon rightDoor on tower is fullheightand can be hingedon the left or right.Coat rod is includedin locker space.Safety interlock systemallows only one drawerto be opened at a time..Locks are standard andkeyed random on all towers.Consecutive and specifickeying options are available.Master-keyed locks are alsoavailable. Products withlocks ship with a lock facering and removable plasticplug to accommodate a lockcylinder installed on site.Lock cylinders are intendedfor installation after the furnitureis installed in order toeliminate the need to keeptrack of each furniture unit’slock number during installation.Lock cylinders must bespecified separately.cLock and Keying Options,page 616Steel top1"HVeneer top1 3 /16"HLaminate top1 3 /16"HLaminate and woodveneer tops with squareedgeprofiles are available inplace of standard 1"H steeltops. Laminate and woodveneer tops are 3 ⁄16" tallerthan steel tops and will addthat dimension to the overallheight of the tower..Steel topTop will default to steel ontowers with proud woodfronts since the door andtop drawer overlap and concealthe top. Wood topis available as an option.3"1 1 /2"Proudwoodfront52" or65 1 /2"50 1 /2"or 64"Base is standard 3"H. Todecrease the overall heightof the tower, a 1 1 ⁄2"H baseis available.Cable-routing base is3"H and has access holeson each side and in the top.Cable-routing base can beused to route cords andcables horizontally throughone or more bases..ConnectionsGanging hardware isincluded to increase stabilityand maintain alignment byjoining adjacent componentsside-by-side, back-to-back,or both. Knockouts for makingthese attachments areincluded in the top. Towerscan also be bolted to thefloor or wall for stability.Wood veneerwith squareedge profileField-installed tops areavailable in two choices—wood veneer with squareedge profile and laminatewith square edge profile.Tops can be used on anindividual tower.cSee Storage SpecificationGuide.3" cablerouting baseLaminatewith squareedge profile1 1 /2" baseField-installed basesare available 1 1 ⁄2"H or 3"Hcable-routing.cSee Storage SpecificationGuide..StorageAnswer Solutions Specification Guide cUniversal Vertical Drawer Towers, continued 247