Answer Solutions Specification Guide - OEC Business Interiors

Stacking JunctionsStacking junctionsallow you to adjust thepanel heights within aworkstation.cSpecifying, pages 310–314Junction top cap is standardon base panel junctions.Use the same top capin stacking configurations.Stacking junctions arealways shared by adjacentpanels. They are availablefor in-line, L, T, V, X, Y,end-of-run, and wall startconfigurations.Stacking horizontalframe package, specifiedseparately, must beused with stacking junctions.Each package includes onehorizontal connecting barand a cable tray.Stacking junctiontrim is included with L, T, V,and end-of-run stackingjunctions. Stacking end-ofruntrim adds 1" to footprint.Plastic aligner is includedwith L, T, V, and end-ofrunstacking junctions.Fork connector isincluded with stacking junctionfor proper connectionto the base panel.Fork ConnectorsActual DimensionsDepth 3" (76 mm)Height 12" and 24".(305 mm and 610 mm)scale150Top cap and junctioncap from base panel areused to trim the top of thepanel.Cables can be routed atthe top of each stackingjunction.Slots in stacking junctionsare identical to base junctionsto accept horizontalconnecting bars, powerkits,and cable trays.Cables can be routed intop of base panel. Cablesneed to be temporarilymoved aside to install forkconnector but can be putback in place and routedthrough the fork connector.Base panel must alwayshave two horizontal connectingbars. The bars mustbe in place prior to addingfork connectors into thejunction..Product DetailsAll existing basepanels can accept astacking junction.Aligner is included withfabric-wrapped vertical trimbut may not be neededdepending on the thicknessof the fabric.End-of-run stackingjunction includes junction,fork connectors, verticaltrim, and plastic trim aligner.End-of-run stacking trimadds 1" to footprint.In-line stacking junctionincludes junction andfork connectors..22 Answer Solutions Specification Guide