Answer Solutions Specification Guide - OEC Business Interiors

Adjustable-HeightWorksurfaces.Bi-level worksurfacesare two nearly equalpieces—a monitor worksurfaceand a large keyboardworksurface. You can adjustthe height of the monitorworksurface with the crankmechanism. You can alsoadjust the height of the keyboardworksurface with thecrank mechanism. Thesetwo adjustments are completelyindependent of eachother and range from26 1 ⁄8"H to 39 1 ⁄2"H.Extension link worksurfacesconnect to cornerworksurfaces to provide theuser with additional space.An extension link worksurfaceattaches to asingle or bi-level cornerworksurface and movesup or down in tandemwith the corner worksurface.Extension linkworksurface includes a gascylinder in the rear column.Extension link worksurfacescannot attach todual worksurfaces.1 1 /2"At least a 1 3 ⁄4" gapmust separate backs of aworksurface and panels toaccommodate cables andprevent pinching. A 1" gapseparates sides and adjacentfurniture. There isalso a 1 1 ⁄2" space betweenthe keyboard and monitorsurfaces on units with twosurfaces.39 1 /2" Application Topics26 1 /8"Adjustable-heightworksurfaces supporta total of 150 pounds. If theunit has two surfaces, themonitor surface will supportup to 130 pounds and theKeyboard surface tiltskeyboard surface will sup-with a range of 25°.port up to 20 pounds..Crank Adjustability DetailsGasCylindersGas cylinder package39 1 /2"can be field installed to singleand dual crank-adjust-Crank drives worm screwable worksurfaces to providein leg of straight single,an additional 110 poundsstraight dual, corner single,of lift assistance (55 poundsand corner dual worksur-26 1 /8"for each cylinder). Gas cylinfacesto raise or lower workdersfit into the empty rearsurface. Chain connects tocolumns of single and dualheight-adjustment mecha-crank-adjustable bases andnism in adjacent leg so itdecrease the load up to 50moves up or down in syncpercent. Gas cylinders can-with crank leg. Crank handlenot be field installed to bi-can be used in either leg.level models because thespace in all four columnsis occupied by the crankmechanism. Gas cylindercomes standard on extensionlink worksurfaces.Surface MaterialsWorksurfaces• Laminate (standard)Straight and cornerbi-level worksurfacesAdjustable-height basehave separate height-adjustmentmechanisms for thekeyboard and the monitorsurfaces, which allow thetwo surfaces to adjust independentlyof one another.1"Monitor surface can accommodateone21" monitor...• Paint1 3 /4".Moving worksurfacescan collide with other components.Don’t install overheadstorage, desk-height power,or desk accessories in thepath of adjustable-heightworksurfaces.Chain connectsheight-adjustmentmechanisms on extensionlink worksurfaces and adjacentworksurfaces to allow userto adjust all worksurfacessimultaneously withone turn of the crank.Three worksurfaces(one corner and two extensionlink worksurfaces) canbe linked and raised orlowered with one action..50%50%Crank-adjustable,adjustable-heightworksurfaces will travel1" for approximately every6.5 turns of the crankhandle..WorksurfacesAnswer Solutions Specification Guide 191