Answer Solutions Specification Guide - OEC Business Interiors

Base Junctions.Y-base junction includesjunction, junction cap, andtwo plastic top cap aligners.Wall Start junctionsecures to the stud in astructural wall or drywallfasteners can be used.Vertical trim is not needed.Also used in off-moduleapplications. Wall startjunction does not add anydimension to panel run.An in-line top capaligner is included within-line junctions.Top cap aligners areincluded with L, T, V, X,and Y junctions.cPages 305 and 307.ConnectionsQuick lock on both endsof the panel’s horizontalconnecting bars engage thejunction in a tight structuralconnection.Base junctions canaccept a stacking junctionof the same type only.Example: An L-base junctionwill accept an L-stackingjunction.Skins extend onto junctionand meet skin of adjacentpanel. The slotted channelof the junction is accessiblebetween these two skins.Panels can support worksurfaces,shelves, and bins.Wiring and CablingHorizontal routingthrough junctions is accommodatedby openings formodular harnesses andcables. Openings at top ofjunction accept lay-in cablerouting...Lay-in junction cablesleeves can be addedin the field to cover theexposed metal edges inlay-in cable space.Modular harnessesthat are 43" or 80" are availableto change the height atwhich you are routing powerkits or to route power fromthe panel base to differentheights.Modular harness is usedto route power through anL, T, V, X, or Y junction.Only the large opening inthe junction at worksurfaceheight allows enough spaceto accommodate the bend inthe harness. Modular harnessis not needed to routepower at worksurfaceheight..30"H junction does nothave a large opening. Amodular harness must beused to route power in a30"H L, T, V, X, or Y junction.Only the base of thejunction allows enoughspace to accommodate thebend in the harness.Surface MaterialsBase junction• Black paintJunction is hidden whenproperly installed.Junction cap• PlasticVertical trim• Paint• Vertical surface fabric(option)• Wood veneer (option)Application TopicsStacking junctions canbe used with any heightbase junction.Stability Guidelinesfor application rules.cSee page 47.PanelsAnswer Solutions Specification Guide 19