Answer Solutions Specification Guide - OEC Business Interiors

Answer Worksurfaces.For Use with AngledPeninsula WorksurfacesSupport panel is includedto connect worksurface tothe panel.Double post leg isincluded to support angledpeninsula worksurfaces at28 1 ⁄2"H. 40"H standingheightlegs are available asan option.For Use with SpannerWorksurfacesDouble post leg isincluded to support spannerworksurface at 28 1 ⁄2"H. 40"Hstanding-height legs areavailable as an option.51"W and 63"W spannerworksurfaces arestandard with one doublepost leg but can also bespecified with optional legsfor freestanding applications.For Use with Trapezoidand Spanner TablesLegs are included withtables to support worksurfaceat 28 1 ⁄2"H..Combinations of trapezoidtables can form largerconference tables.Tip: Connector bracket isavailable to lock the tablestogether. The bracketunlocks to reconfiguretables. It is field installed.Refer to style numberTS40010 (Group Work) inthe Turnstone FurniturePortfolio Specification Guide(T10004).For Use with OvalTablesLegs are specified as anoption on oval worksurfaces.They are available with orwithout casters and areinstalled in the field.For Use with VisitorWorksurfacesSupport panel is includedto support end of visitorworksurface. 40"H standingheightsupport panel isavailable as an option.For Use with CurvedLinking WorksurfacesSingle post leg isincluded to support curvedlinking worksurface. 40"Hstanding-height leg is availableas an option..ConnectionsSupports are orderedseparately and installed inthe field.For panel-supportedinstallations you can use:• Side support brackets• Cantilever with tie plate• End panel• Standing-height end panel• Support plate• Center support panel withtie plate• Standing-height centersupport panel with tie platecSee page 194 forPanel-Mounted AnswerWorksurface Supports.• Universal pedestal withfillercPage 229For freestanding installationsyou can use:• Single post leg• Single post leg with caster• Nesting post leg• Nesting post leg withcaster• Double post leg• Double post C-leg• Support platecSee page 196 for Legsand Supports for AnswerWorksurfaces.Tip: Pedestal can also beused in freestanding installations.Answer pedestal isshown above..Reinforcing channel(TS7WKSPT) is used toreinforce all worksurfaceswith 60" or more of unsupportedkneespace.cPage 137Wiring & CablingWorksurface wiremanagers are availableto convert cable scallopsinto grommets in freestandingapplications. Black wiremanagers are included withwood veneer worksurfaces.cSee Worksurface Powerand Communication,page 205..Surface MaterialsWorksurface• Laminate (standard)• Accent laminate (option)A family of pre-approved,non-Steelcase laminatesthat reflect the latest trendsin color.cSee Surface MaterialsReference Manual.• Open Line laminate(option)A program including non-Steelcase laminates whichare suitable for use onSteelcase products.cSee Surface MaterialsReference Manual.• Wood (option)• Customiz stain (option onwood)• Full-fill finish (option onwood)User’s edge(s)• PVC color defaultcPage 607 forColor DefaultsBack and side edges• PVC color defaultcPage 607 forColor DefaultsLegs• PaintCaster on post legs• Black onlySupport panel• PaintShippingPalletizing streamlinesunloading and staging ofworksurfaces. Identicalworksurfaces ordered on thesame line item are packedon pallets containing 10–20worksurfaces. Remainingworksurfaces are packedindividually in cartons. If palletizingis not desired, orderin quantities of nine or lessper line item. For maximumunload efficiency, utilize pallethandling equipment at jobsite whenever possible.Wood veneer worksurfacescannot be palletized..WorksurfacesAnswer Solutions Specification Guide 189