Answer Solutions Specification Guide - OEC Business Interiors

Base Junctions.Base junctions completethe structure of panel packagesand panel buildups.Answer panels always sharea junction with adjacent panels.You order the style ofjunction you need separately.cSpecifying, pages 304–308Aligners ensure correct fitwith adjacent panel top caps.Opening in top of junctionallows lay-in cable routingbeneath top caps.Slots in junction accept thepanel’s horizontal bars,cable trays and powerkits.Slotted channels injunction accommodate worksurfacesupports and overheadstorage components at1" increments.Trim is included with L, T,V, and end-of-run junctionsto finish exposed surfaces.Trim is available with fabricwrapped or wood veneeroptions.Large opening at worksurfaceheight in 42"H,54"H, 66"H, and 78"H junctionsmust be used to routepower through an L, T, V,X, or Y base junction. Amodular harness is requiredif power is routed at anylocation other than worksurfaceheight.Leveling glides adjust toinstall panels on unevenfloors. Range is 2".Actual DimensionsDepth 3"(76 mm)Height 29 13 ⁄16",* 40 3 ⁄4", 53 1 ⁄8", 65 31 ⁄64", and 77 27 ⁄32"(757 mm, 1035 mm, 1349 mm, 1663 mm,and 1977 mm)*Note: Wall start junctions are not available 29 13 ⁄16"H.Junction cap is includedwith junction when needed.Skins attach to junctionwith concealed hardware..Product DetailsEnd-of-run base junctionincludes junction, verticaltrim, and junction cap.End-of-run trim adds 1" tofootprint.In-line base junctionincludes junction and plastictop cap aligner.L-base junction includesjunction, vertical trim, junctioncap, and plastic top capaligner..T-base junction includesjunction, vertical trim, junctioncap, and two plastic topcap aligners.X-base junction includesjunction, junction cap, andthree plastic top cap aligners.V-base junction includesjunction, vertical trim, junctioncap, and plastic top capaligner..18 Answer Solutions Specification Guide