Answer Solutions Specification Guide - OEC Business Interiors

Universal Freestanding WorksurfacesLegs for Freestanding WorksurfacesWorksurface supportsSingle post leg is avail-attach to a worksurfaceable individually or as ato make it freestanding orpackage of four legs. Castertethered to Pathways Postand glide versions areand Beam.available.cSpecifying, page 416Double post C-leg isan individual support andis used at the ends of aworksurface.Alignment tab helpsinstallers locate properleg position under theworksurface.Cabby leg is availableindividually or as a packageof four legs. Caster and glideversions are available.Leveling glides, included,allow worksurface height tobe adjusted on unevenfloors.Single post leg withcaster is available individuallyor as a package of fourlegs.Elliptical leg is availablein glide version either innesting or desk-height.Actual DimensionsCabby leg Elliptical Single Single post Double postleg post leg leg with caster C-legHeight* (standard) 26" or 28 1 ⁄2" 26" or 28 1 ⁄2" 26" or 28 1 ⁄2" 26" or 28 1 ⁄2" 28 1 ⁄2"Glide range 3 ⁄4" 5 ⁄8" 3 ⁄4" N.A. 5 ⁄8". *Height dimensions include the thickness of a worksurface..Product DetailsLegs support worksurfacesat 26"H or 28 1 ⁄2"H overall,including worksurfacethickness.Worksurface legs andtether bracket areordered separately andinstalled on site.cSee Worksurface and LegCombinations, page 178.Worksurface legs andtether bracket arenon-handed to accommodateleft- and right-handapplications.Worksurface legscannot be used in a sharedapplication with two worksurfaces.P-edge profile doesnot provide enough attachmentspace for leg plate.When a shared leg applicationis required, orderUniversal FreestandingLaminate Worksurfaces..176 Answer Solutions Specification Guide