Answer Solutions Specification Guide - OEC Business Interiors

Universal Freestanding WorksurfacesPeninsula, TaperedPeninsula, and Bubble JettyWorksurfaces.Tapered edge profile isachieved by rolling woodveneer surface aroundshaped edge of worksurfacecore. Tapered edge profileslopes toward the user forenhanced comfort.P-edge profile isachieved by adding a P-shaped vinyl (plastic) edgeto the worksurface core.P-edge profile provides asoft, durable interface forthe user and is available inblack only.ConnectionsPeninsula, taperedpeninsula, and bubblejetty worksurfaces arefreestanding and are supportedby legs. Legs areordered separately andinstalled in the field.Tip: Use the Worksurfaceand Leg Combinationsmatrix to determine the typeand number of legs youneed to order for the worksurfaceyou choose.cPage 178Tip: C-leg may be used onthe square end of the bubblejetty worksurface only.Underside of worksurfacehas inset locationsthat support slip-fit and nestingapplications. Cabby legscan be positioned in a 45° or90° orientation. Post legsare positioned in 45° orientationonly.Tip: Multiple leg positionsare available on taperedpeninsula and bubble jettyworksurfaces only.cSee Worksurface LegPositions, page 179.90° orientation45° orientationLegs installed in a90° orientation allow forgreater storage and kneespacebelow the worksurface.45° leg orientation isa preferred aesthetic formany customers. Cabbylegs installed at a 45° orientationwill appear to havemore curvature when viewedfrom the front edge ofworksurface.9"6"3"Legs may be installedinset from the edge of theworksurface to accommodateslip-fit planning. Amount ofavailable space (3", 6", or 9")is measured from the edgeof the worksurface to theedge of the leg. Amount ofslip-fit varies by worksurfaceshape and size.cSee Worksurface LegPositions, page 179...Slip-fit planning allowsworkstation footprint toexpand or decrease, andis ideal for off-moduleapplications.Primary worksurfacewith 28 1 ⁄2"H legs installed at6" or 9" inset can slip overadjacent worksurfaces thatare supported with 26"Hlegs.26"H legs allow worksurfacesto nest underneath anadjacent worksurface with28 1 ⁄2"H legs or a panelmountedworksurface.Surface MaterialsLaminate Worksurfaces• Laminate• Accent laminate (option)A family of pre-approved,non-Steelcase laminatesthat reflect the latest trendsin color.cSee Surface MaterialsReference Manual.• Open Line laminate(option)A program including non-Steelcase laminates whichare suitable for use onSteelcase products.cSee Surface MaterialsReference Manual.Edge• Vinyl (plastic)Wood VeneerWorksurfaces• Wood veneer (standard)• Customiz stain (option)• Full-fill finish (option)Square (3 mm) ortapered edge profile• Wood veneer to matchworksurfaceP-edge profile• Vinyl (plastic):6000 Black onlyCorian ®• Freestanding Worksurfacesare available in solid surfaceDupont Corian. ® Topsare ordered directly fromTFI, the industry leadingproducer of Dupont Corianproducts.cSee Additional Resources,page 4...Application TopicsMobile pedestals upto 24 1 ⁄2"H will fit under26"H worksurfaces withoutbracing.Mobile pedestals up to27"H will fit under 28 1 ⁄2"Hworksurfaces without bracing.Worksurfaces with reinforcingbrace will reducethe available space by 1".Worksurface and LegCombinationscPage 178Worksurface LegPositionscPage 179Wiring and CablingAccessoriescPage 212ShippingPalletizing streamlinesunloading and staging ofworksurfaces. Identicalworksurfaces ordered on thesame line item are packedon pallets containing 10–20worksurfaces. Remainingworksurfaces are packedindividually in cartons. If palletizingis not desired, orderin quantities of nine or lessper line item. For maximumunload efficiency, utilizepallet handling equipment atjob site whenever possible.Wood veneer worksurfacescannot be palletized..WorksurfacesAnswer Solutions Specification Guide 167