Answer Solutions Specification Guide - OEC Business Interiors

Universal Freestanding WorksurfacesPeninsula, Tapered Peninsula, and Bubble Jetty WorksurfacesPeninsula, taperedpeninsula, and bubblejetty worksurfacesallow an extended rangeof workstation layouts andenable collaboration.cSpecifying peninsulaworksurfaces, page 405cSpecifying tapered peninsulaworksurfaces, page 406cSpecifying bubble jettyPeninsulaworksurfaces, page 407Worksurface has a woodcore with a laminate or woodveneer surface and is 1 3 ⁄16"thick.Edge profile is continuousaround all edges of theworksurface.Tapered PeninsulaBubble JettyCCBDADA ABTip: Left-hand unit shown.BRight-hand unit available.Actual DimensionsPeninsula WorksurfacesBubble Jetty WorksurfacesA B A B C D36" 27" 24" 72" 45" 22"Tapered Peninsula Worksurfaces 24" 78" 51" 28"A B C D 30" 72" 38" 28"26 2 ⁄3" 32" 48" 32" 30" 78" 44" 34". 33 1 ⁄3" 40" 60" 40"Radius corner eliminatessharp edges and is appropriatefor freestanding, mobilefurniture.Product DetailsLaminate Worksurfaces3 /8"P-edge profile risesslightly above the laminatesurface and curves into a3⁄8" radius which optimizesergonomic benefit for theuser.Edge is available in sixvinyl (plastic) colors. Vinyl(plastic) color is specifiedseparately from laminatecolor.Wood VeneerWorksurfacesSquare (3 mm) Taperededge profile edge profile3 /8"P-edge profileEdges of worksurfacesare available in three profiles—square(3 mm),tapered, and P-edge.Square (3 mm) edgeprofile is achieved byadding wood veneer surfacesto worksurface core.This technique can beapplied to worksurfaces thatare straight or curved...166 Answer Solutions Specification Guide